F3-SYNC-MIB
AI MIB Summary
The F3-SYNC-MIB provides SNMP management definitions for synchronization state and performance metrics on ADVA Optical Networking FSP150CM/CC product lines. It enables monitoring of timing synchronization status, clock source selection, and synchronization lock states critical for maintaining network timing integrity.
This module defines the Synchronization MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Main OID:
f3SyncMIB.1.3.6.1.4.1.2544.1.12.12
70
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
70 total| Object Name |
|---|
f3SyncMIBThis module defines the Synchronization MIB definitions used by
the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.12 |
f3SyncObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.12.1 |
f3SyncTableA list of entries corresponding to the Sync entities. SEQUENCE OF F3SyncEntry .1.3.6.1.4.1.2544.1.12.12.1.1 |
f3SyncEntryAn entry containing information applicable to a particular
Sync Entity. F3SyncEntry .1.3.6.1.4.1.2544.1.12.12.1.1.1 |
f3SyncIndexUnique index value associated with the Synchronization Entity.ro Integer32 .1.3.6.1.4.1.2544.1.12.12.1.1.1.1 |
f3SyncAdminStateThis object represents the Administrative State of the Sync
Entity.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.12.1.1.1.2 |
f3SyncOperationalStateThis object represents the Operational State of the Sync
Entity.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.12.1.1.1.3 |
f3SyncSecondaryStateThis object represents the Secondary State of the Sync
Entity.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.12.1.1.1.4 |
f3SyncNetworkClockTypeThis object represents the regional clock type for
the system. This object determines which QL codes are
supported.rw NetworkClockType .1.3.6.1.4.1.2544.1.12.12.1.1.1.5 |
f3SyncSelectedReferenceThis object provides the source of the currently selected
Sync reference. This would be the OID of the actual entity (bits port, traffic port etc.).
An OID value of {0 0} represents internal clock.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.1.1.6 |
f3SyncClockModeThis object provides the system clock mode.ro ClockMode .1.3.6.1.4.1.2544.1.12.12.1.1.1.7 |
f3SyncQLThis object provides the QL of the system reference.
This is the value for each external reference's Transmit
QL attribute unless it should be transmitting QL-DNU.ro SSMQualityLevel .1.3.6.1.4.1.2544.1.12.12.1.1.1.8 |
f3SyncAliasThis object allows SNMP management entities to provide an
alias to the Sync entity.rw DisplayString .1.3.6.1.4.1.2544.1.12.12.1.1.1.9 |
f3SyncDomainThis object represents the Sync entity's domain type. A Sync entity can be in
chassis (system) domain (applicable for HUB shelf and Aggregation shelf)
or line card domain (applicable for HUB shelf, Aggregation shelf as well as
NIDs).rw SyncDomainType .1.3.6.1.4.1.2544.1.12.12.1.1.1.10 |
f3SyncSelectionModeThis object represents the Sync entity's selection mode.
If this mode is configured as ql-mode, the selection of
which reference should be used shall be based upon the
reference's Quality Level. The highest received
Quality Level shall be the selected reference. The priority
shall only be used to distinguish between references with the
same received QL. When multiple references have the same QL
and same priority, the behavior of selection process within
the group is non-revertive.
If this mode is configued as priority-mode, the selection
of which reference should be used shall be based upon
the reference's priority (i.e. QL is disabled). When
multiple references have the same priority, the behavior of
selection process within the group is non-revertive.rw SyncSelectionMode .1.3.6.1.4.1.2544.1.12.12.1.1.1.11 |
f3SyncWaitToRestoreTimeThis object allows configuration of the Sync entity's wait-to-restore
time (in minutes). A value of 0 disables WTR timers for all references.rw Integer32 .1.3.6.1.4.1.2544.1.12.12.1.1.1.12 |
f3SyncOperationSyncRefThis object allows configuration of the Object Identifier of the
Sync Reference Entity on which the f3SyncOperationType is performed.
A value of 0.0 denotes no sync reference is chosen for operation.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.1.1.13 |
f3SyncOperationTypeThis object allows to perform the specified operation on the Sync Reference
specified by f3SyncOperationSyncRef.rw SyncOperationType .1.3.6.1.4.1.2544.1.12.12.1.1.1.14 |
f3SyncRefTableA list of entries corresponding to the Sync Reference entities. SEQUENCE OF F3SyncRefEntry .1.3.6.1.4.1.2544.1.12.12.1.2 |
f3SyncRefEntryAn entry containing information applicable to a particular
Sync Reference Entity. F3SyncRefEntry .1.3.6.1.4.1.2544.1.12.12.1.2.1 |
f3SyncRefIndexUnique index value associated with the Sync Reference Entity.ro Integer32 .1.3.6.1.4.1.2544.1.12.12.1.2.1.1 |
f3SyncRefReferenceThis object represents the external sync reference to be
used as system clock reference source.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.2.1.2 |
f3SyncRefPriorityThis object represents the priority of the external sync reference
to be used as system clock reference source. This value is
not mandatory when a single clock reference source is supported.
Lower priority value indicates higher priority.rw Integer32 .1.3.6.1.4.1.2544.1.12.12.1.2.1.3 |
f3SyncRefStatusThis object provides the sync reference status.ro SyncRefStatus .1.3.6.1.4.1.2544.1.12.12.1.2.1.4 |
f3SyncRefStateThis object provides the sync reference state.ro SyncRefState .1.3.6.1.4.1.2544.1.12.12.1.2.1.5 |
f3SyncRefReceivedQLThis object provides the sync reference received QL.ro SSMQualityLevel .1.3.6.1.4.1.2544.1.12.12.1.2.1.6 |
f3SyncRefStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.2.1.7 |
f3SyncRefRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3SyncRefRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3SyncRefRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3SyncRefRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.2.1.8 |
f3SyncRefAliasThis object allows SNMP management entities to provide an
alias to the Sync Reference entity.rw DisplayString .1.3.6.1.4.1.2544.1.12.12.1.2.1.9 |
f3SyncRefEffectiveQLThis object provides the sync reference effective QL.ro SSMQualityLevel .1.3.6.1.4.1.2544.1.12.12.1.2.1.10 |
f3SyncRefOperationTypeThis object provides information on the current/active operation
on this sync reference.ro SyncOperationType .1.3.6.1.4.1.2544.1.12.12.1.2.1.11 |
f3TimeClockTableA list of entries corresponding to the Time Clock entities. SEQUENCE OF F3TimeClockEntry .1.3.6.1.4.1.2544.1.12.12.1.3 |
f3TimeClockEntryAn entry containing information applicable to a particular
Time Clock Entity. F3TimeClockEntry .1.3.6.1.4.1.2544.1.12.12.1.3.1 |
f3TimeClockIndexUnique index value associated with the Time Clock Entity. Integer32 .1.3.6.1.4.1.2544.1.12.12.1.3.1.1 |
f3TimeClockAliasThis object allows SNMP management entities to provide an
alias to the Time Clock entity.rw F3DisplayString .1.3.6.1.4.1.2544.1.12.12.1.3.1.2 |
f3TimeClockAdminStateThis object represents the Administrative State of the Time Clock
Entity.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.12.1.3.1.3 |
f3TimeClockOperationalStateThis object represents the Operational State of the Time Clock
Entity.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.12.1.3.1.4 |
f3TimeClockSecondaryStateThis object represents the Secondary State of the Time Clock
Entity.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.12.1.3.1.5 |
f3TimeClockSelectedReferenceThis object provides the source of the currently selected
Time Clock reference. This would be the OID of the actual entity (GPS port, PPS port etc.).
An OID value of {0 0} represents internal clock.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.3.1.6 |
f3TimeClockClockModeThis object provides the Time Clock mode.ro TimeClockMode .1.3.6.1.4.1.2544.1.12.12.1.3.1.7 |
f3TimeClockClockClassThis object provides the Time Clock Clock Classrodeprecated Unsigned32 .1.3.6.1.4.1.2544.1.12.12.1.3.1.8 |
f3TimeClockSelectionMode!! Currently Only Priority Mode is supported !!
This object represents the Time Clock entity's selection mode.
If this mode is configured as ql-mode, the selection of
which reference should be used shall be based upon the
reference's Quality Level. The highest received
Quality Level shall be the selected reference. The priority
shall only be used to distinguish between references with the
same received QL. When multiple references have the same QL
and same priority, the behavior of selection process within
the group is non-revertive.
If this mode is configued as priority-mode, the selection
of which reference should be used shall be based upon
the reference's priority (i.e. QL is disabled). When
multiple references have the same priority, the behavior of
selection process within the group is non-revertive.rw SyncSelectionMode .1.3.6.1.4.1.2544.1.12.12.1.3.1.9 |
f3TimeClockWaitToRestoreTimeThis object allows configuration of the Time Clock entity's wait-to-restore
time (in minutes). A value of 0 disables WTR timers for all references.rw Integer32 .1.3.6.1.4.1.2544.1.12.12.1.3.1.10 |
f3TimeClockOperationTimeClockRefThis object allows configuration of the Object Identifier of the
TimeClock Reference Entity on which the f3TimeClockOperationType is performed.
A value of 0.0 denotes no Time Clock reference is chosen for operation.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.3.1.11 |
f3TimeClockOperationTypeThis object allows to perform the specified operation on the Time Clock Reference
specified by f3TimeClockOperationTimeClockRef.rw SyncOperationType .1.3.6.1.4.1.2544.1.12.12.1.3.1.12 |
f3TimeClockLeap59True if last minute of current UTC day contains 59 seconds, else falsero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.3.1.13 |
f3TimeClockLeap61True if last minute of current UTC day contains 61 seconds, else falsero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.3.1.14 |
f3TimeClockTimeTraceAbilityStatusThis object describe the trace ability status.ro TimeTraceAbilityStatus .1.3.6.1.4.1.2544.1.12.12.1.3.1.15 |
f3TimeClockExpectedQLThis object describe the expected quality level.rw SSMQualityLevel .1.3.6.1.4.1.2544.1.12.12.1.3.1.16 |
f3TimeClockCurrentQLThis object describe the current quality level.ro SSMQualityLevel .1.3.6.1.4.1.2544.1.12.12.1.3.1.17 |
f3TimeClockSyncRefCandidateThis object describe whether it is sync reference candiddate.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.3.1.18 |
f3TimeClockTimeHoldoverPerformanceThis object describe the Holdover performance.rw TimeHoldoverPerformance .1.3.6.1.4.1.2544.1.12.12.1.3.1.19 |
f3TimeClockUtcOffsetThis object describe the UTC offset.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.12.1.3.1.20 |
f3TimeClockCurrentTimeOfDayThis object allows specification of the Time Clock Current
Time of Day.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.3.1.21 |
f3TimeClockFrequencyReferenceThis object provides the source of the currently selected frequency source for the Time Clock.
This would be the OID of the actual entity (GNSS Receiver port, Input Frquency Port, Sync object).
An OID value of {0.0} represents a state where the Time Clock does not use a dedicated frequency input.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.3.1.22 |
f3TimeClockFrequencyClockModeThis object provides the Frequency Clock mode determined according to the used f3TimeClockFrequencyReference.
In Case the f3TimeClockFrequencyReference is not selected (0.0), a 'notAvailable' value shall be used herero TimeClockMode .1.3.6.1.4.1.2544.1.12.12.1.3.1.23 |
f3TimeClockRefTableA list of entries corresponding to the Time Clock Reference entities. SEQUENCE OF F3TimeClockRefEntry .1.3.6.1.4.1.2544.1.12.12.1.4 |
f3TimeClockRefEntryAn entry containing information applicable to a particular
Time Clock Reference Entity. F3TimeClockRefEntry .1.3.6.1.4.1.2544.1.12.12.1.4.1 |
f3TimeClockRefIndexUnique index value associated with the Time Clock Reference Entity. Integer32 .1.3.6.1.4.1.2544.1.12.12.1.4.1.1 |
f3TimeClockRefAliasThis object allows SNMP management entities to provide an
alias to the Time Clock Reference entity.rw F3DisplayString .1.3.6.1.4.1.2544.1.12.12.1.4.1.2 |
f3TimeClockRefReferenceThis object represents the external reference to be
used as system clock reference source.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.4.1.3 |
f3TimeClockRefPriorityThis object represents the priority of the external reference
to be used as Time clock reference source. This value is
not mandatory when a single clock reference source is supported.
Lower priority value indicates higher priority.rw Integer32 .1.3.6.1.4.1.2544.1.12.12.1.4.1.4 |
f3TimeClockRefStatusThis object provides the Time Clock reference status.ro SyncRefStatus .1.3.6.1.4.1.2544.1.12.12.1.4.1.5 |
f3TimeClockRefStateThis object provides the Time Clock reference state.ro SyncRefState .1.3.6.1.4.1.2544.1.12.12.1.4.1.6 |
f3TimeClockRefOperationTypeThis object provides information on the current/active operation
on this Time Clock reference.ro SyncOperationType .1.3.6.1.4.1.2544.1.12.12.1.4.1.7 |
f3TimeClockRefStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.4.1.8 |
f3TimeClockRefRowStatusThe status of this row. An entry MUST NOT exist in the
active state unless all objects in the entry have an
appropriate value, as described
in the description clause for each writable object.
The values of f3TimeClockRefRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3TimeClockRefRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3TimeClockRefRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.12.1.4.1.9 |
f3SyncConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.12.2 |
f3SyncCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.12.2.1 |
f3SyncGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.12.2.2 |