Fore-TIMING-MIB
write something interesting here
Main OID:
tcmGroup.1.3.6.1.4.1.326.2.2.1.11
32
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
tcmGroupwrite something interesting here MODULE-IDENTITY .1.3.6.1.4.1.326.2.2.1.11 |
tcmTimingSourceChangeThis trap is generated whenever the Timing Control Module (TCM) timing source (tcmCurrentTimingRef) is changed either manually or by the system due to failure detection. NOTIFICATION-TYPE .1.3.6.1.4.1.326.2.2.1.11.0.1 |
tcmTimingSourceFailedThis trap is generated whenever the Timing Control Module (TCM) timing source (tcmCurrentTimingRef) fails. NOTIFICATION-TYPE .1.3.6.1.4.1.326.2.2.1.11.0.2 |
tcmTableThis table contains the hardware information for the Timing Control Module (TCM) s. SEQUENCE OF TcmEntry .1.3.6.1.4.1.326.2.2.1.11.1 |
tcmEntryThis table entry contains the hardware information for a single Timing Control Module (TCM) . TcmEntry .1.3.6.1.4.1.326.2.2.1.11.1.1 |
tcmIndexThis is the index for this Timing Control Module (TCM) . Integer32 .1.3.6.1.4.1.326.2.2.1.11.1.1.1 |
tcmHwTypeThis is the type for this Timing Control Module (TCM) .ro Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.2 |
tcmHwVersionThis is the version for this Timing Control Module (TCM) .ro Integer32 .1.3.6.1.4.1.326.2.2.1.11.1.1.3 |
tcmPllStatusThis is the phase-locked loop (PLL) status for this Timing Control Module (TCM) .ro Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.4 |
tcmOperationStatusThis is the operation status of the clock output for this Timing Control Module (TCM). The status is enabled if the switch is configured to use TCM for timing and disabled otherwise.ro Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.5 |
tcmCurrentTimingRefThis is the current timing reference in use for this Timing Control Module (TCM) .ro Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.6 |
tcmRequestedTimingModeThis is the timing reference requested to be used for this Timing Control Module (TCM) .rw TcmTimingMode .1.3.6.1.4.1.326.2.2.1.11.1.1.7 |
tcmOperatingTimingModeThis is the operating timing mode, which can be different from the requested timing mode if mode failover is enabled.ro TcmTimingMode .1.3.6.1.4.1.326.2.2.1.11.1.1.8 |
tcmModeFailoverThis is the modefailover that causes the Timing Control Module (TCM) to automatically switch between timing modes (for example external to line) if it is enabled.rw Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.9 |
tcmPrimaryRefSourceThis is the primary timing reference source for this Timing Control Module (TCM) .ro TcmReferenceSource .1.3.6.1.4.1.326.2.2.1.11.1.1.10 |
tcmSecondaryRefSourceThis is the secondary timing reference source for this Timing Control Module (TCM) .ro TcmReferenceSource .1.3.6.1.4.1.326.2.2.1.11.1.1.11 |
tcmBitsFramingFormatThis is the framing format of the BITS interface for this Timing Control Module (TCM) .rw Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.12 |
tcmBitsCodingFormatThis is the coding format of the BITS interface for this Timing Control Module (TCM) .rw Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.13 |
tcmBitsOutputLevelThis is the output level (dB) of the DS1 BITS interface for this Timing Control Module (TCM) .rw Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.14 |
tcmRevertiveSwitchingThis is the status of the revertive switching for timing sources on this Timing Control Module (TCM) .rw Enumeration .1.3.6.1.4.1.326.2.2.1.11.1.1.15 |
tcmRevertiveDelayThis is the amount of time after the restoration of the primary timing reference before the Timing Control Module (TCM) will be instructed to return to the primary timing reference. This value is truncated to whole seconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.326.2.2.1.11.1.1.16 |
tcmFailoverDelayThis is the amount of time after the failure of a timing reference before the Timing Control Module (TCM) will be instructed to switch to the next available timing reference. This value is truncated to whole seconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.326.2.2.1.11.1.1.17 |
tcmReferenceTableThis table contains the timing reference source information for the Timing Control Module (TCM) . SEQUENCE OF TcmReferenceEntry .1.3.6.1.4.1.326.2.2.1.11.2 |
tcmReferenceEntryThis table entry contains the timing reference source information for a single Timing Control Module (TCM) . TcmReferenceEntry .1.3.6.1.4.1.326.2.2.1.11.2.1 |
tcmRefSourceThis is the timing reference source index for the Timing Control Module (TCM) . TcmReferenceSource .1.3.6.1.4.1.326.2.2.1.11.2.1.1 |
tcmRefSourceTextThis is a textual description of the timing reference source that is provided to the Timing Control Module (TCM).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.326.2.2.1.11.2.1.2 |
tcmRefSourceStatusThis is the status of the timing reference source that is provided to the Timing Control Module (TCM).ro Enumeration .1.3.6.1.4.1.326.2.2.1.11.2.1.3 |
tcmRefSourceAdminStatusThis is the admin status of the timing reference source that is provided to the Timing Control Module (TCM).rw Enumeration .1.3.6.1.4.1.326.2.2.1.11.2.1.4 |
tcmRefSourceQualStatusThis is the RefQual status of the timing reference source that is provided to the Timing Control Module (TCM) .ro Enumeration .1.3.6.1.4.1.326.2.2.1.11.2.1.5 |
tcmTxBits1RefSourceThis object is the timing source that is used to derive DS1 or E1 signal transmitted out on the BITS1 interface.rw DerivedReferenceSource .1.3.6.1.4.1.326.2.2.1.11.3 |
tcmTxBits2RefSourceThis object is the timing source that is used to derive DS1 or E1 signal transmitted out on the BITS2 interface.rw DerivedReferenceSource .1.3.6.1.4.1.326.2.2.1.11.4 |
tcmTxBitsOperModeThis object refers to the mode of operation for the derived DS1 or E1 outputs. In thresholdAIS mode, AIS is transmitted on the derived DS1 or E1 signal when the transmit reference source becomes unacceptable. In automatic mode, synchronization status messages are passed through on the derived DS1 or E1 output if SSM Automatic Reference Switching is enabled and the DS1 or E1 frame format supports SSM. Otherwise, AIS is transmitted when the reference becomes unacceptable.rw Enumeration .1.3.6.1.4.1.326.2.2.1.11.5 |