Fore-DSX1-MIB
MIB module for supporting the DSX1 port module.
Main OID:
foreDsx1.1.3.6.1.4.1.326.2.2.1.1.10
34
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
foreDsx1MIB module for supporting the DSX1 port module. MODULE-IDENTITY .1.3.6.1.4.1.326.2.2.1.1.10 |
dsx1ForeConfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.2.1.1.10.1 |
dsx1ForeConfTableA table of DSX1 switch port configuration information. SEQUENCE OF Dsx1ForeConfEntry .1.3.6.1.4.1.326.2.2.1.1.10.1.1 |
dsx1ForeConfEntryA table entry containing DSX1 configuration information for each port. Not all RFC1406 configuration table variables are included, and some are modified. Dsx1ForeConfEntry .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1 |
dsx1ForeLineIndexThis object is the identifier of a DS1 Inter- face on a managed device. If there is an ifEn- try that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.ro Integer32 (1..'7fffffff'h) .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.1 |
dsx1ForeReceiveCodeThis variable indicates the type of code that was received across the DSX interface. The values mean: dsx1ReceiveNoCode receiving looped or normal data dsx1ReceiveLineCode receiving request for a line loopback dsx1ReceivePayloadCode receiving a request for a payload loopback dsx1ReceiveResetCode receiving a loopback deactivation request dsx1ReceiveQRS receiving a Quasi-Random Signal (QRS) test pattern dsx1Receive511Pattern receiving a 511 bit fixed test pattern dsx1Receive3in24Pattern receiving a fixed test pattern of 3 bits set in 24 dsx1ReceiveTestPattern receiving a test pattern other than the above.ro Enumeration .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.2 |
dsx1ForeLineLengthThis variable represents the length of the physical cable connected to the dsx1 port. The user has to set this object to match the physical cable in order to get the netmod to receive the signal on the cable. The different values are: dsx1LineLt40 (1) means the line is shorter than 40m, dsx1Line40-80 (2) means the line length is between 40m and 80m, dsx1Line80-120 (3) means the line length is between 80m and 120m, dsx1Line120-160 (4) means the line length is between 120m and 160m, dsx1Line160-200 (5) means the line length is between 160m and 200m, dsx1LineE1Coax (6) means E1 Coax line, not applicable for T1, dsx1LineTwistedPair (7) means E1 Twisted Pair line, not applicable for T1.rw Enumeration .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.3 |
dsx1ForeFdlConfigurationThis varialbe indicate whether the FDL state machine acts as network or user siderw Enumeration .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.4 |
dsx1ForeLineImpedanceThe default line impedance of the E1 line. Note that this is not applicable for T1rwdeprecated Integer32 .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.5 |
dsx1ForeFdlPerfConfThis variable indicate whether the FDL state machine is enabled or turned off for performance reports. See T1.403 for details.rw Enumeration .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.6 |
dsx1ForeFdlBomConfThis variable indicate whether Bit Oriented Messages will be generated and transmitted. See T1.403 for details.rw Enumeration .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.7 |
dsx1ForeUpStreamAISThe upsteam AIS alarm generation flag enabled: the upstream AIS is generated disabled: the upstream AIS is not generatedrw Enumeration .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.8 |
dsx1ForePortModelThe underlying hardware port model. The value corresponds to the hwPortModel mib variable.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.9 |
dsx1ForeAdminStatusThe desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start with adminStatus in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, adminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state).rw Enumeration .1.3.6.1.4.1.326.2.2.1.1.10.1.1.1.10 |
dsx1ForeStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.2.1.1.10.2 |
dsx1ForeFramingTableA table of DSX1 framing statistics information. SEQUENCE OF Dsx1ForeFramingEntry .1.3.6.1.4.1.326.2.2.1.1.10.2.1 |
dsx1ForeFramingEntryA table entry containing DSX1 framing statistics information. Dsx1ForeFramingEntry .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1 |
dsx1ForeFramingIndexThe number of this port.ro Integer32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.1 |
dsx1ForeFramingLOSsThe number of secondsx in which Loss Of Signal (LOS) errors have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.2 |
dsx1ForeFramingLCVsThe number of Line Code Violations (LCV) that have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.3 |
dsx1ForeFramingFERRsThe number of Framing ERRor (FERR) events that have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.4 |
dsx1ForeFramingOOFsThe number of Out Of Frame (OOF) error events that have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.5 |
dsx1ForeFramingAISsThe number of secondsx in which Alarm Indication Signals (AIS) have been detected. AIS indicates that an upstream failure has been detected by the far end.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.6 |
dsx1ForeFramingB8ZSPatternsThe number of seconds in which B8ZS Pattern events have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.7 |
dsx1ForeFraming8ZerosThe number of seconds in which 8 Zeros events have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.8 |
dsx1ForeFraming16ZerosThe number of seconds in which 16 Zeros events have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.9 |
dsx1ForeFramingYellowAlarmsThe number of secondsx in which Yellow Alarm events have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.10 |
dsx1ForeFramingRedAlarmsThe number of secondsx in which Red Alarm events have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.11 |
dsx1ForeFramingBEEsThe number of Bit Encoding Error (BEE) events that have been detected.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.1.1.12 |
dsx1ForeAtmTableA table of DSX1 ATM statistics information. SEQUENCE OF Dsx1ForeAtmEntry .1.3.6.1.4.1.326.2.2.1.1.10.2.2 |
dsx1ForeAtmEntryA table entry containing DSX1 ATM statistics information. Dsx1ForeAtmEntry .1.3.6.1.4.1.326.2.2.1.1.10.2.2.1 |
dsx1ForeAtmIndexThe ifIndex of this port, actually it's currently the ifIndex of the associaated dsx1 port not the ATM port as currently they are assumed to be the same thing which of course they are notro Integer32 .1.3.6.1.4.1.326.2.2.1.1.10.2.2.1.1 |
dsx1ForeAtmRxCellsNumber of ATM cells that were received.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.2.1.2 |
dsx1ForeAtmTxCellsNumber of non-null ATM cells that were transmitted.ro Counter32 .1.3.6.1.4.1.326.2.2.1.1.10.2.2.1.3 |