Fore-PLCP-MIB

Name: SNMP MIBs and OID Database
Creator: Quadrata FZCO
License: https://opensource.org/licenses/MIT

This mib implements management information for the PLCP convergence layer in an atm interface. Typically PLCP framing is used to encapsulate ATM cells for transmission over a DS3/E3 link.

Main OID:

forePlcpMib.1.3.6.1.4.1.326.2.2.1.1.13

Objects

Active

Status

Dependencies

Imported Objects

Objects

32 total

Object Name	Syntax	OID
forePlcpMibThis mib implements management information for the PLCP convergence layer in an atm interface. Typically PLCP framing is used to encapsulate ATM cells for transmission over a DS3/E3 link. MODULE-IDENTITY `.1.3.6.1.4.1.326.2.2.1.1.13`	MODULE-IDENTITY	`.1.3.6.1.4.1.326.2.2.1.1.13`
forePlcpYellowDetectedThis trap indicates that the specified DS3 port has detected incoming PLCP Yellow Alarm. NOTIFICATION-TYPE `.1.3.6.1.4.1.326.2.2.1.1.13.0.1`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.326.2.2.1.1.13.0.1`
forePlcpYellowClearedThis trap indicates that the specified DS3 port has detected clearance of incoming PLCP Yellow Alarm. NOTIFICATION-TYPE `.1.3.6.1.4.1.326.2.2.1.1.13.0.2`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.326.2.2.1.1.13.0.2`
forePlcpLOFDetectedThis trap indicates that the specified DS3 port has detected incoming PLCP LOF Alarm. NOTIFICATION-TYPE `.1.3.6.1.4.1.326.2.2.1.1.13.0.3`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.326.2.2.1.1.13.0.3`
forePlcpLOFClearedThis trap indicates that the specified DS3 port has detected clearance of incoming PLCP LOF Alarm. NOTIFICATION-TYPE `.1.3.6.1.4.1.326.2.2.1.1.13.0.4`	NOTIFICATION-TYPE	`.1.3.6.1.4.1.326.2.2.1.1.13.0.4`
forePlcpConfigTableA table of PLCP convergence layer information configuration parameters. SEQUENCE OF ForePlcpConfigEntry `.1.3.6.1.4.1.326.2.2.1.1.13.1`	SEQUENCE OF ForePlcpConfigEntry	`.1.3.6.1.4.1.326.2.2.1.1.13.1`
forePlcpConfigEntryA table entry containing PLCP convergence layer configuration information for each atm interface using PLCP. ForePlcpConfigEntry `.1.3.6.1.4.1.326.2.2.1.1.13.1.1`	ForePlcpConfigEntry	`.1.3.6.1.4.1.326.2.2.1.1.13.1.1`
forePlcpConfigFrameFormatThis variable controls the PLCP framing format used to carry ATM cells over this interface. Note that some interfaces may not support all formats and that this variable may be read-only for some interfaces.rw Enumeration `.1.3.6.1.4.1.326.2.2.1.1.13.1.1.1`	Enumeration	`.1.3.6.1.4.1.326.2.2.1.1.13.1.1.1`
forePlcpTotalTableA table of PLCP convergence layer information and parameters. SEQUENCE OF ForePlcpTotalEntry `.1.3.6.1.4.1.326.2.2.1.1.13.2`	SEQUENCE OF ForePlcpTotalEntry	`.1.3.6.1.4.1.326.2.2.1.1.13.2`
forePlcpTotalEntryA table entry containing PLCP convergence layer information for each atm interface using PLCP. ForePlcpTotalEntry `.1.3.6.1.4.1.326.2.2.1.1.13.2.1`	ForePlcpTotalEntry	`.1.3.6.1.4.1.326.2.2.1.1.13.2.1`
forePlcpTotalFerrCountThe number of framing errors detected since the interface was reset. A framing error is determined by errors in the A1 and A2 bytes of the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.2.1.1`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.2.1.1`
forePlcpTotalLofSecondsThe number of seconds an out of frame condition persisted.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.2.1.2`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.2.1.2`
forePlcpTotalBip8CountThe number of Bit Interleaved Parity errors detected since the interface was reset. A BIP error is determined by using the parity carried in the B1 byte of the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.2.1.3`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.2.1.3`
forePlcpTotalFebeCountThe number of Far End BIP Errors detected. This information is determined by examination of the G1 byte in the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.2.1.4`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.2.1.4`
forePlcpTotalYellowAlarmSecondsThe number of seconds that a far end yellow alarm condition has persisted. This information is determined by examiniation of the G1 byte of the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.2.1.5`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.2.1.5`
forePlcpCurrentTableA table of PLCP convergence layer information and parameters. SEQUENCE OF ForePlcpCurrentEntry `.1.3.6.1.4.1.326.2.2.1.1.13.3`	SEQUENCE OF ForePlcpCurrentEntry	`.1.3.6.1.4.1.326.2.2.1.1.13.3`
forePlcpCurrentEntryA table entry containing PLCP convergence layer current statistics for each atm interface using PLCP. ForePlcpCurrentEntry `.1.3.6.1.4.1.326.2.2.1.1.13.3.1`	ForePlcpCurrentEntry	`.1.3.6.1.4.1.326.2.2.1.1.13.3.1`
forePlcpCurrentFerrCountThe number of framing errors detected in current interval. A framing error is determined by errors in the A1 and A2 bytes of the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.3.1.1`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.3.1.1`
forePlcpCurrentBip8CountThe number of Bit Interleaved Parity errors detected in the current interval. A BIP error is determined by using the parity carried in the B1 byte of the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.3.1.2`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.3.1.2`
forePlcpCurrentFebeCountThe number of Far End BIP Errors detected in the current interval. This information is determined by examination of the G1 byte in the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.3.1.3`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.3.1.3`
forePlcpCurrentErrSecondsNumber of Errored Seconds in current intervalro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.3.1.4`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.3.1.4`
forePlcpCurrentSevErrSecondsNumber of Severely Errored Seconds in current intervalro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.3.1.5`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.3.1.5`
forePlcpCurrentUnavailSecondsNumber of Unavailable Seconds in the current intervalro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.3.1.6`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.3.1.6`
forePlcpIntervalTableInterval table of PLCP convergence layer information and parameters. SEQUENCE OF ForePlcpIntervalEntry `.1.3.6.1.4.1.326.2.2.1.1.13.4`	SEQUENCE OF ForePlcpIntervalEntry	`.1.3.6.1.4.1.326.2.2.1.1.13.4`
forePlcpIntervalEntryA table entry containing PLCP convergence layer current statistics for each atm interface using PLCP. ForePlcpIntervalEntry `.1.3.6.1.4.1.326.2.2.1.1.13.4.1`	ForePlcpIntervalEntry	`.1.3.6.1.4.1.326.2.2.1.1.13.4.1`
forePlcpIntervalInterval numberro Integer32 `.1.3.6.1.4.1.326.2.2.1.1.13.4.1.1`	Integer32	`.1.3.6.1.4.1.326.2.2.1.1.13.4.1.1`
forePlcpIntervalFerrCountThe number of framing errors detected in particular interval. A framing error is determined by errors in the A1 and A2 bytes of the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.4.1.2`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.4.1.2`
forePlcpIntervalBip8CountThe number of Bit Interleaved Parity errors detected in the particular interval. A BIP error is determined by using the parity carried in the B1 byte of the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.4.1.3`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.4.1.3`
forePlcpIntervalFebeCountThe number of Far End BIP Errors detected in the particular interval. This information is determined by examination of the G1 byte in the PLCP frame.ro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.4.1.4`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.4.1.4`
forePlcpIntervalErrSecondsNumber of Errored Seconds in particular intervalro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.4.1.5`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.4.1.5`
forePlcpIntervalSevErrSecondsNumber of Severely Errored Seconds in particular intervalro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.4.1.6`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.4.1.6`
forePlcpIntervalUnavailSecondsNumber of Unavailable Seconds in the particular intervalro Counter32 `.1.3.6.1.4.1.326.2.2.1.1.13.4.1.7`	Counter32	`.1.3.6.1.4.1.326.2.2.1.1.13.4.1.7`