fa-mib40
AI MIB Summary
Standard SNMP MIB module defining data structures for fa-mib40.
234
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
234 total| Object Name |
|---|
fcmgmt OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94 |
RFC1155-SMI Unknown .1.3.6.1.4.1.458.101.94 |
connUnitStatusChangeThe overall status of the connectivity unit has
changed.
Recommended severity level (for filtering): alert TRAP-TYPE .1.3.6.1.4.1.458.101.94.0.1 |
connUnitDeletedTrapA connUnit has been deleted from this agent.
Recommended severity level (for filtering): warning TRAP-TYPE .1.3.6.1.4.1.458.101.94.0.3 |
connUnitEventTrapAn event has been generated by the
connectivity unit.
Recommended severity level (for filtering): info TRAP-TYPE .1.3.6.1.4.1.458.101.94.0.4 |
connUnitSensorStatusChangeThe overall status of the connectivity unit has
changed.
Recommended severity level (for filtering): alert TRAP-TYPE .1.3.6.1.4.1.458.101.94.0.5 |
connUnitPortStatusChangeThe overall status of the connectivity unit has
changed.
Recommended severity level (for filtering): alert TRAP-TYPE .1.3.6.1.4.1.458.101.94.0.6 |
connSet OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94.1 |
uNumberThe number of connectivity units present on this
system (represented by this agent). May be a count
of the boards in a chassis or the number of full boxes
in a rack.ro INTEGER .1.3.6.1.4.1.458.101.94.1.1 |
systemURLThe top-level URL of the system. If it does not exist
the value is empty string. The URL format is
implementation dependant and can have keywords embedded
that are preceeded by a percent sign (eg, %USER).
The following are the defined keywords that will
be recognized and replaced with data during a launch.
USER - replace with username
PASSWORD - replace with password
GLOBALID - replace with globalid
SERIALNO - replace with serial number
A management application will read this object from the
MIB, provide values for any of the keywords listed above
that are present in the string, and then use the URL to
invoke or launch the program referenced.
If write is not supported, then return invalid.
This value will be retained across boots.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.2 |
statusChangeTimeThe sysuptime timestamp in centiseconds at which
the last status change occurred for any members of
the set.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.458.101.94.1.3 |
configurationChangeTimeThe sysuptime timestamp in centiseconds at which
the last configuration change occurred for any
members of the set. This represents a union of change
information for connUnitConfigurationChangeTime.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.458.101.94.1.4 |
connUnitTableChangeTimeThe sysuptime timestamp in centiseconds at which
the connUnitTable was updated (an entry was either
added or deleted.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.458.101.94.1.5 |
connUnitTableThe connectivity table contains general information
on the system's units. This is the list of units under
a single SNMP agent. The number of entries is given by
the value of uNumber. It is 1 for stand-alone system. SEQUENCE OF ConnUnitEntry .1.3.6.1.4.1.458.101.94.1.6 |
connUnitEntryA connectivity unit entry containing objects for a
particular unit. ConnUnitEntry .1.3.6.1.4.1.458.101.94.1.6.1 |
connUnitIdThe unique identification for this connectivity unit
among those within this proxy domain.
The value MUST be unique within the proxy domain
because it is the index variable for connUnitTable.
The value assigned to a given conectivity unit
SHOULD be persistent across agent and unit resets.
It SHOULD be the same as connUnitGlobalId
if connUnitGlobalId is known and stable.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.6.1.1 |
connUnitGlobalIdAn optional global-scope identifier for this connectivity unit.
It MUST be a WWN for this connectivity unit
or 16 octets of value zero.
WWN formats requiring fewer than 16 octets
MUST be extended to 16 octets with trailing zero octets,
Left justified, zero filled,
If a WWN is used for connUnitId,
the same WWN MUST be used for connUnitGlobalId.
When a non-zero value is provided,
it SHOULD be persistent across agent and unit resets.
It SHOULD be globally unique.
It SHOULD be one of these FC-PH/PH3 formats:
IEEE (NAA=1)
IEEE Extended (NAA=2)
IEEE Registered (NAA=5).
IEEE Registered extended (NAA=6).
Use of the IEEE formats allows any IEEE-registered vendor
to assure global uniqueness independently.
The following are some references on IEEE WWN formats:
http://standards.ieee.org/regauth/oui/tutorials/fibreformat.html
http://standards.ieee.org/regauth/oui/tutorials/fibrecomp_id.html
If one or more WWNs are associated with the connUnit
via other management methods,
one of them SHOULD be used for connUnitGlobalId.
If there is not a WWN assigned specifically to the connUnit,
there is some merit, though not a requirement,
to using a WWN assigned to (one of)
its permanently attached FC/LAN interface(s).
This can not risk uniqueness, though.
As a counterexample, if your
agent runs in a host and the host has an HBA,
it is quite possible that agent, host, and HBA
will all be distinct connUnits, so the host
and agent can not use the WWN of the HBA.
Another example:
If your hub has a built-in Ethernet port, it
might be reasonable for the hub to use its MAC
address (prefixed with the appropriate
NAA) as its connUnitId. But if the
Ethernet were a replaceable PCCard, the hub
should have an independent ID.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.6.1.2 |
connUnitTypeThe type of this connectivity unit.ro FcUnitType .1.3.6.1.4.1.458.101.94.1.6.1.3 |
connUnitNumportsNumber of physical ports in the connectivity unit
(internal/embedded, external).ro INTEGER .1.3.6.1.4.1.458.101.94.1.6.1.4 |
connUnitStateThis object reports the overall state of the
connectivity unit. The meaning of all values
is essentially self-explanatory. Any of these
values may occur with any of the ConnUnitStatus
values.ro Enumeration .1.3.6.1.4.1.458.101.94.1.6.1.5 |
connUnitStatusOverall status of the connectivity unit. The goal of this
object is to be the single poll point to check the status
of the connunit. If there is any other component that has
warning, then this should be set to warning, etc. Any of
these values may occur with any of the ConnUnitState
values.ro Enumeration .1.3.6.1.4.1.458.101.94.1.6.1.6 |
connUnitProductThe connectivity unit vendor's product
model name.ro DisplayString .1.3.6.1.4.1.458.101.94.1.6.1.7 |
connUnitSnThe serial number for this connectivity unit.ro DisplayString .1.3.6.1.4.1.458.101.94.1.6.1.8 |
connUnitUpTimeThe number of centiseconds since the
last unit initialization.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.458.101.94.1.6.1.9 |
connUnitUrlURL to launch a management application,
if applicable. Otherwise empty string.
In a standalone unit, this would be the
same as the top-level URL. This has the same
definition as systemURL for keywords.
If write is not supported, then return invalid.
This value will be retained across boots.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.6.1.10 |
connUnitDomainId24 bit Fibre Channel address ID of this
connectivity unit, right justified with leading
zero's if required. This should be set to the
Fibre Channel address ID or if it is a switch
it would be set to the Domain Controller address.
If this value is not applicable,
return all bits set to 1.ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.6.1.11 |
connUnitProxyMasterA value of 'yes' means this is the proxy master
unit for a set of managed units. For example,
this could be the only unit with a management
card in it for a set of units. A standalone unit
should return 'yes' for this object.ro Enumeration .1.3.6.1.4.1.458.101.94.1.6.1.12 |
connUnitPrincipalWhether this connectivity unit is the principal unit
within the group of fabric elements. If this value
is not applicable, return unknown.ro Enumeration .1.3.6.1.4.1.458.101.94.1.6.1.13 |
connUnitNumSensorsNumber of sensors in the connUnitSensorTable.ro INTEGER .1.3.6.1.4.1.458.101.94.1.6.1.14 |
connUnitStatusChangeTimeThe sysuptime timestamp in centiseconds
at which the last status change occurred.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.458.101.94.1.6.1.15 |
connUnitConfigurationChangeTimeThe sysuptime timestamp in centiseconds
at which the last configuration change
occurred.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.458.101.94.1.6.1.16 |
connUnitNumRevsThe number of revisions in the connUnitRevsTable.ro INTEGER .1.3.6.1.4.1.458.101.94.1.6.1.17 |
connUnitNumZonesNumber of zones defined in connUnitZoneTable.roobsolete INTEGER .1.3.6.1.4.1.458.101.94.1.6.1.18 |
connUnitModuleIdThis is a unique id, persistent between boots,
that can be used to group a set of connUnits
together into a module. The intended use would
be to create a connUnit with a connUnitType of
'module' to represent a physical or logical
group of connectivity units. Then the value
of the group would be set to the value of
connUnitId for this 'container' connUnit.
connUnitModuleId should be zeros if this
connUnit is not part of a module.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.6.1.19 |
connUnitNameA display string containing a name for this
connectivity unit. This object value should be
persistent between boots.rw DisplayString .1.3.6.1.4.1.458.101.94.1.6.1.20 |
connUnitInfoA display string containing information
about this connectivity unit. This object value
should be persistent between boots.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.6.1.21 |
connUnitControlThis object is used to control the addressed
connUnit.
NOTE: 'Cold Start' and 'Warm Start'
are as defined in MIB II and are not meant
to be a factory reset.
resetConnUnitColdStart:
the addressed unit performs
a 'Cold Start' reset.
resetConnUnitWarmStart:
the addressed unit performs
a 'Warm Start' reset.
offlineConnUnit:
the addressed unit puts itself into
an implementation dependant 'offline' state.
In general,if a unit is in an offline state,
it cannot be used to perform meaningful
Fibre Channel work.
onlineConnUnit:
the addressed unit puts itself into an
implementation dependant 'online' state.
In general, if a unit is in an online state,
it is capable of performing meaningful
Fibre Channel work.
NOTE: Each implementation may chose not to allow
any or all of these values on a SET.rw Enumeration .1.3.6.1.4.1.458.101.94.1.6.1.22 |
connUnitContactContact information for this connectivity
unit. Persistent across boots.rw DisplayString .1.3.6.1.4.1.458.101.94.1.6.1.23 |
connUnitLocationLocation information for this connectivity
unit.Persistent across boots.rw DisplayString .1.3.6.1.4.1.458.101.94.1.6.1.24 |
connUnitEventFilterThis value defines the event severity
that will be logged by this connectivity unit.
All events of severity less than or equal to
connUnitEventFilter are logged in connUnitEventTable.
Persistent across boots.rw FcEventSeverity .1.3.6.1.4.1.458.101.94.1.6.1.25 |
connUnitNumEventsNumber of events currently in the
connUnitEventTable.ro INTEGER .1.3.6.1.4.1.458.101.94.1.6.1.26 |
connUnitMaxEventsMax number of events that can be defined
in connUnitEventTable.ro INTEGER .1.3.6.1.4.1.458.101.94.1.6.1.27 |
connUnitEventCurrIDThe last used event id (connUnitEventIndex).ro INTEGER .1.3.6.1.4.1.458.101.94.1.6.1.28 |
connUnitFabricIDA globally unique value to identify the fabric that this
ConnUnit belongs to, otherwise empty string. This would
typically be equal to the connUnitGlobalID of the
primary switch in a Fibre Channel fabric.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.6.1.29 |
connUnitNumLinksThe number of links in the link table.ro INTEGER .1.3.6.1.4.1.458.101.94.1.6.1.30 |
connUnitVendorIdThe connectivity unit vendor's name.ro DisplayString .1.3.6.1.4.1.458.101.94.1.6.1.31 |
connUnitRevsTableTable of the revisions supported by
connectivity units managed by this agent. SEQUENCE OF ConnUnitRevsEntry .1.3.6.1.4.1.458.101.94.1.7 |
connUnitRevsEntry ConnUnitRevsEntry .1.3.6.1.4.1.458.101.94.1.7.1 |
connUnitRevsUnitIdThe connUnitId of the connectivity unit
that contains this revision table.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.7.1.1 |
connUnitRevsIndexA unique value among all connUnitRevsEntrys
with the same value of connUnitRevsUnitId,
in the range between 1 and
connUnitNumRevs[connUnitRevsUnitId].ro INTEGER .1.3.6.1.4.1.458.101.94.1.7.1.2 |
connUnitRevsRevIdA vendor-specific string identifying a
revision of a component of the connUnit
indexed by connUnitRevsUnitId.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.7.1.3 |
connUnitRevsDescriptionDescription of a component to which the revision
corresponds.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.7.1.4 |
connUnitSensorTableTable of the sensors supported by each
connectivity unit managed by this agent. SEQUENCE OF ConnUnitSensorEntry .1.3.6.1.4.1.458.101.94.1.8 |
connUnitSensorEntryEach entry contains the information for a
specific sensor. ConnUnitSensorEntry .1.3.6.1.4.1.458.101.94.1.8.1 |
connUnitSensorUnitIdThe connUnitId of the connectivity unit
that contains this sensor table.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.8.1.1 |
connUnitSensorIndexA unique value among all connUnitSensorEntrys
with the same value of connUnitSensorUnitId,
in the range between 1 and
connUnitNumSensor[connUnitSensorUnitId].ro INTEGER .1.3.6.1.4.1.458.101.94.1.8.1.2 |
connUnitSensorNameA textual identification of the sensor
intended primarily for operator use.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.8.1.3 |
connUnitSensorStatusThe status indicated by the sensor.ro Enumeration .1.3.6.1.4.1.458.101.94.1.8.1.4 |
connUnitSensorInfoMiscellaneous static info about the sensor
such as its serial number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.8.1.5 |
connUnitSensorMessageThis describes the status of the sensor
as a message. It may also provide more
resolution on the sensor indication, for
example 'Cover temperature 1503K, above
nominal operating range'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.8.1.6 |
connUnitSensorTypeThe type of component being monitored by this
sensor.ro Enumeration .1.3.6.1.4.1.458.101.94.1.8.1.7 |
connUnitSensorCharacteristicThe characteristics being monitored by this
sensor.ro Enumeration .1.3.6.1.4.1.458.101.94.1.8.1.8 |
connUnitPortTableGeneric information on ports for a specific
connUnit. SEQUENCE OF ConnUnitPortEntry .1.3.6.1.4.1.458.101.94.1.10 |
connUnitPortEntryEach entry contains the information for
a specific port. ConnUnitPortEntry .1.3.6.1.4.1.458.101.94.1.10.1 |
connUnitPortUnitIdThe connUnitId of the connectivity unit
that contains this port.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.10.1.1 |
connUnitPortIndexA unique value among all connUnitPortEntrys
on this connectivity unit, between 1 and
connUnitNumPort[connUnitPortUnitId].ro INTEGER .1.3.6.1.4.1.458.101.94.1.10.1.2 |
connUnitPortTypeThe port type.ro Enumeration .1.3.6.1.4.1.458.101.94.1.10.1.3 |
connUnitPortFCClassCapBit mask that specifies the classes
of service capability of this port. If this is not
applicable, return all bits set to zero.
The bits have
the following definition:
unknown - 0
class-f - 1
class-one - 2
class-two - 4
class-three - 8
class-four - 16
class-five - 32
class-six - 64ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.10.1.4 |
connUnitPortFCClassOpBit mask that specifies the classes
of service that are currently operational.
If this is not applicable, return all bits
set to zero. This object has the same
definition as connUnitPortFCClassCapro OCTET STRING .1.3.6.1.4.1.458.101.94.1.10.1.5 |
connUnitPortStateThe user selected state of the port hardware.ro Enumeration .1.3.6.1.4.1.458.101.94.1.10.1.6 |
connUnitPortStatusAn overall protocol status for the
port. This value of connUnitPortState is not
online, then this is reported Unknown.ro Enumeration .1.3.6.1.4.1.458.101.94.1.10.1.7 |
connUnitPortTransmitterTypeThe technology of the port transceiver.ro Enumeration .1.3.6.1.4.1.458.101.94.1.10.1.8 |
connUnitPortModuleTypeThe module type of the port connector.ro Enumeration .1.3.6.1.4.1.458.101.94.1.10.1.9 |
connUnitPortWwnThe World Wide Name of the port
if applicable, otherwise all zeros.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.10.1.10 |
connUnitPortFCIdThis is the assigned Fibre Channel ID of
this port. This value is expected to be
a Big Endian value of 24 bits. If this is
loop, then it is the ALPA that is connected.
If this is an eport, then it will only
contain the domain ID left justified, zero
filled. If this port does not have a Fibre
Channel address, return all bits set to 1.ro FcAddressId .1.3.6.1.4.1.458.101.94.1.10.1.11 |
connUnitPortSnThe serial number of the unit (e.g., for
a GBIC). If this is not applicable, return
empty string.ro DisplayString .1.3.6.1.4.1.458.101.94.1.10.1.12 |
connUnitPortRevisionThe port revision (e.g., for a GBIC).ro DisplayString .1.3.6.1.4.1.458.101.94.1.10.1.13 |
connUnitPortVendorThe port vendor (e.g., for a GBIC).ro DisplayString .1.3.6.1.4.1.458.101.94.1.10.1.14 |
connUnitPortSpeedThe speed of the port in kilobytes per
second.ro INTEGER .1.3.6.1.4.1.458.101.94.1.10.1.15 |
connUnitPortControlThis object is used to control the addressed
connUnit's port. Valid commands are:
resetConnUnitPort: If the addressed connUnit
allows this operation to be performed to this
port, the addressed port performs a
vendor-specific 'reset' operation. Examples of
these operations are: the Link Reset protocol,
the Loop Initialization protocol, or a
resynchronization occurring between the
transceiver in the addressed port to the
transceiver that the port is connected to.
bypassConnUnitPort: If the addressed connUnit
allows this operation to be performed to this
port, the addressed port performs a
vendor-specific 'bypass' operation. Examples of
these operations are:
transitioning from online to offline, a
request(NON-PARTICIPATING) command to the
Loop Port state machine, or removal of the
port from an arbitrated loop by a hub.
unbypassConnUnitPort: If the addressed connUnit
allows this operation to be performed to this
port, the addressed port performs a
vendor-specific 'unbypass' operation. Examples
of these operations are:
the Link Failure protocol, a
request(PARTICIPATING) command to the
Loop Port state machine, or addition of the
port to an arbitrated loop by a hub.
offlineConnUnitPort: If the addressed connUnit
allows this operation to be performed to this
port, the addressed port performs a
vendor-specific 'offline' operation. Examples
of these operations are:
disabling a port's transceiver, the Link
Failure protocol, request(NON-PARTICIPATING)
command to the Loop Port state machine, or
removal of the port from an arbitrated loop
by a hub.
onlineConnUnitPort: If the addressed connUnit
allows this operation to be performed to this
port, the addressed port performs a
vendor-specific 'online' operation. Examples
of these operations are:
enabling a port's transceiver, the Link
Failure protocol, request(PARTICIPATING)
command to the Loop Port state machine, or
addition of the port from an arbitrated loop
by a hub.
resetConnUnitPortCounters: If the addressed connUnit
allows this operation to be performed to this
port, the addressed port statistics table counters
will be set to zero.
NOTE: Each implementation may chose not to allow
any or all of these values on a SET. On a read, if
you do not support write, then return invalid. Otherwise
return the last control operation attempted.rw Enumeration .1.3.6.1.4.1.458.101.94.1.10.1.16 |
connUnitPortNameA user-defined name for this port. This means that up to
DisplayString characters may be supported. If less than,
then the name will be truncated in the connunit.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.10.1.17 |
connUnitPortPhysicalNumberThis is the internal port number this
port is known by. In many implementations,
this should be the same as connUnitPortIndex.
Some implementations may have an internal port
representation not compatible with the rules
for table indeces. In that case, provide the
internal representation of this port in this
object. This value may also be used in the
connUnitLinkPortNumberX or connUnitLinkPortNumberY
objects of the connUnitLinkTable.ro INTEGER .1.3.6.1.4.1.458.101.94.1.10.1.18 |
connUnitPortStatObjectThis contains the OID of the first object of the
table that contains the statistics for this particular
port. If this has a value of zero, then there are no
statistics available for this port. The port type
information will help identify the statistics objects
that will be found in the table.rodeprecated OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94.1.10.1.19 |
connUnitPortProtocolCapBit mask that specifies the driver level
protocol capability of this port. If this is not
applicable, return all bits set to zero.
The bits have
the following definition:
unknown - 0
Loop - 1
Fabric - 2
SCSI - 4
TCP/IP - 8
VI - 16
FICON - 32ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.10.1.20 |
connUnitPortProtocolOpBit mask that specifies the driver level
protocol(s) that are currently operational.
If this is not applicable, return all bits
set to zero. This object has the same
definition as connUnitPortProtocolCapro OCTET STRING .1.3.6.1.4.1.458.101.94.1.10.1.21 |
connUnitPortNodeWwnThe Node World Wide Name of the port
if applicable, otherwise all zeros.
This should have the same value for a
group of related ports. The container is
defined as the largest physical unit.
For example, all ports on HBAs on a host
will have the same Node WWN. All ports on
the same storage subsystem will have the
same Node WWN.ro FcNameId .1.3.6.1.4.1.458.101.94.1.10.1.22 |
connUnitPortHWStateThe hardware detected state of the port.ro Enumeration .1.3.6.1.4.1.458.101.94.1.10.1.23 |
connUnitEventTableThe table of connectivity unit events. Errors,
warnings, and information should be reported
in this table. SEQUENCE OF ConnUnitEventEntry .1.3.6.1.4.1.458.101.94.1.11 |
connUnitEventEntryEach entry contains information on
a specific event for the given
connectivity unit. ConnUnitEventEntry .1.3.6.1.4.1.458.101.94.1.11.1 |
connUnitEventUnitIdThe connUnitId of the connectivity unit
that contains this event table.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.11.1.1 |
connUnitEventIndexEach connectivity unit has its own event buffer.
As it wraps, it may write over previous events.
This object is an index into the buffer.
It is recommended that this table be read using
'getNext's to retrieve the initial table.
The management application should read the
event table at periodic intervals and then
determine if any new entries were added by
comparing the last known index value with the
current highest index value. The management
application should then update its copy of
the event table. If the read interval
is too long, it is possible that there may
be events that may not be contained in the
agent's internal event buffer.
For example, an agent may read events 50-75.
At the next read interval, connUnitEventCurrID
is 189. If the management app tries to read
event index 76, and the agent's internal buffer
is 100 entries max, event index 76 will no longer
be available.
The index value is an incrementing integer starting
from one every time there is a table reset.
On table reset, all contents are emptied and
all indeces are set to zero. When an
event is added to the table, the event is
assigned the next higher integer value than
the last item entered into the table. If the
index value reaches its maximum value, the next
item entered will cause the index value to
roll over and start at one again.ro INTEGER .1.3.6.1.4.1.458.101.94.1.11.1.2 |
connUnitEventIdThe internal event Id. Incremented for each
event, ranging between 1 and connUnitMaxEvents.
Not used as table index to simplify
the agent implementation. When this
reaches the end of the range specified by
connUnitMaxEvents, the Id will roll over to start
at one. This value will be set back to one at
reset. The relationship of this value to the index
is that internal event id may represent a smaller
number than a 32 bit integer (eg max 100 entries)
and would only have a value range up to
connUnitMaxEvents.rodeprecated INTEGER .1.3.6.1.4.1.458.101.94.1.11.1.3 |
connUnitREventTimeThis is the real time when the event occurred.
It has the following format.
DDMMYYYY HHMMSS
DD=day number
MM=month number
YYYY=year number
HH=hour number
MM=minute number
SS=seconds number
If not applicable, return either a NULL string
or '00000000 000000'.ro DisplayString .1.3.6.1.4.1.458.101.94.1.11.1.4 |
connUnitSEventTimeThis is the sysuptime timestamp when the
event occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.458.101.94.1.11.1.5 |
connUnitEventSeverityThe event severity level.ro FcEventSeverity .1.3.6.1.4.1.458.101.94.1.11.1.6 |
connUnitEventTypeThe type of this event.ro Enumeration .1.3.6.1.4.1.458.101.94.1.11.1.7 |
connUnitEventObjectThis is used with the connUnitEventType
to identify which object the event refers to.
Examples are connUnitPortStatus.connUnitId.connUnitPortIndex,
connUnitStatus.connUnitId, etc.ro OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94.1.11.1.8 |
connUnitEventDescrThe description of the event.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.458.101.94.1.11.1.9 |
connUnitLinkTableA list of links know to this agent from this
connectivity unit to other connectivity units. SEQUENCE OF ConnUnitLinkEntry .1.3.6.1.4.1.458.101.94.1.12 |
connUnitLinkEntryAn entry describing a particular link to another. ConnUnitLinkEntry .1.3.6.1.4.1.458.101.94.1.12.1 |
connUnitLinkUnitIdThe connUnitId of the connectivity unit
that contains this link table.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.12.1.1 |
connUnitLinkIndexThis index is used to create a unique value
for each entry in the link table with the same
connUnitLinkUnitId. The value
can only be reused if it is not currently in
use and the value is the next candidate to
be used. This value wraps at the highest
value represented by the size of INTEGER.
This value is reset to zero when the system is
reset and the first value to be used is one.ro INTEGER .1.3.6.1.4.1.458.101.94.1.12.1.2 |
connUnitLinkNodeIdXThe node WWN of the unit at one end
of the link. If the node WWN is unknown
and the node is a connUnit in the responding
agent then the value of this object MUST BE
equal to its connUnitID.ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.12.1.3 |
connUnitLinkPortNumberXThe port number on the unit specified by
connUnitLinkNodeIdX if known, otherwise -1.
If the value is nonnegative then it will be
equal to connUnitPortPhysicalNumber.ro INTEGER .1.3.6.1.4.1.458.101.94.1.12.1.4 |
connUnitLinkPortWwnXThe port WWN of the unit specified by
connUnitLinkNodeIdX if known,
otherwise 16 octets of binary 0ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.12.1.5 |
connUnitLinkNodeIdYThe node WWN of the unit at the other end
of the link. If the node WWN is unknown
and the node is a connUnit in the responding
SNMP agency then the value of this object
MUST BE equal to its connUnitID.ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.12.1.6 |
connUnitLinkPortNumberYThe port number on the unit specified by
connUnitLinkNodeIdY if known, otherwise -1.
If the value is nonnegative then it will be
equal to connUnitPortPhysicalNumber.ro INTEGER .1.3.6.1.4.1.458.101.94.1.12.1.7 |
connUnitLinkPortWwnYThe port WWN on the unit specified by
connUnitLinkNodeIdY if known,
otherwise 16 octets of binary 0ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.12.1.8 |
connUnitLinkAgentAddressYThe address of an FCMGMT MIB agent for the
node identified by connUnitLinkNodeIdY,
if known; otherwise 16 octets of binary 0ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.12.1.9 |
connUnitLinkAgentAddressTypeYIf connUnitLinkAgentAddressY is nonzero,
it is a protocol address.
ConnUnitLinkAgentAddressTypeY is the
the 'address family number' assigned by IANA
to identify the address format.
(eg, 1 is Ipv4, 2 is Ipv6). If
connUnitLinkAgentAddressY is all zeros, then
this value is ignored.ro INTEGER .1.3.6.1.4.1.458.101.94.1.12.1.10 |
connUnitLinkAgentPortYThe IP port number for the agent. This is
provided in case the agent is at a non-standard
SNMP port.ro INTEGER .1.3.6.1.4.1.458.101.94.1.12.1.11 |
connUnitLinkUnitTypeYType of the FC connectivity unit as defined in
connUnitType.ro FcUnitType .1.3.6.1.4.1.458.101.94.1.12.1.12 |
connUnitLinkConnIdYThis is the Fibre Channel ID of this port.
If the connectivity unit is a switch, this
is expected to be a Big Endian value of 24
bits. If this is loop, then it is the ALPA
that is connected. If this is an eport, then
it will only contain the domain ID. If not
any of those, unknown or cascaded loop,
return all bits set to 1.ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.12.1.13 |
connUnitLinkCurrIndexThe last used link index.ro INTEGER .1.3.6.1.4.1.458.101.94.1.12.1.14 |
connUnitZoneTable SEQUENCE OF ConnUnitZoneEntry .1.3.6.1.4.1.458.101.94.1.13 |
connUnitZoneEntry ConnUnitZoneEntry .1.3.6.1.4.1.458.101.94.1.13.1 |
connUnitZoneIndexUnique table index for each zone.
Valid values are between 1 and
connUnitZoneSetNumZones.ro INTEGER .1.3.6.1.4.1.458.101.94.1.13.1.1 |
connUnitZoneMemberIndexUnique table index for each zone
member. Valid values are between
1 and connUnitZoneNumMembers.ro INTEGER .1.3.6.1.4.1.458.101.94.1.13.1.2 |
connUnitZoneSetNameName of the active zone set to
which the zone and zone member
belong.ro DisplayString .1.3.6.1.4.1.458.101.94.1.13.1.3 |
connUnitZoneSetNumZonesThe number of zones in the active
zone set.ro INTEGER .1.3.6.1.4.1.458.101.94.1.13.1.4 |
connUnitZoneNameName of the zone.ro DisplayString .1.3.6.1.4.1.458.101.94.1.13.1.5 |
connUnitZoneCapabilities1-byte bit mask that specifies the
zoning capabilities supported by the
fabric.
Bit 7 - Soft zones supported.
Bit 6 - Hard zones supported.
Bits 5-0 - Reserved.ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.13.1.6 |
connUnitZoneEnforcementState1-byte bit mask that specifies the
current enforcement of the Zone Set.
Bit 7 - Soft zone set enforced.
Bit 6 - Hard zone set enforced.
Bits 5-0 - Reserved.ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.13.1.7 |
connUnitZoneAttributeBlockA variable length structure that
contains extended zone attributes
defined in the FC-GS-4 enhanced
zone server. See FC-GS-4 draft
standard for details and format of
the structure.
Support of this object is optional.ro OCTET STRING .1.3.6.1.4.1.458.101.94.1.13.1.8 |
connUnitZoneNumMembersNumber of zone members in the
zone: connUnitZoneName.ro INTEGER .1.3.6.1.4.1.458.101.94.1.13.1.9 |
connUnitZoneMemberIdTypeType of zone member ID:
1- Port WWN
2- Domain & Port ID
3- FC Address
4- Node WWN
5- Alias Name
6-'FF'h - Vendor specified.ro INTEGER .1.3.6.1.4.1.458.101.94.1.13.1.10 |
connUnitZoneMemberIDID of the zone member based on
connUnitZoneMemberIdType.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.13.1.11 |
connUnitZoningAliasTable SEQUENCE OF ConnUnitZoningAliasEntry .1.3.6.1.4.1.458.101.94.1.14 |
connUnitZoningAliasEntry ConnUnitZoningAliasEntry .1.3.6.1.4.1.458.101.94.1.14.1 |
connUnitZoningAliasIndexUnique table index for each alias.
Valid values are between 1 and
connUnitZoningAliasNumAliases.ro INTEGER .1.3.6.1.4.1.458.101.94.1.14.1.1 |
connUnitZoningAliasMemberIndexUnique table index for each alias
member. Valid values are between 1
and connUnitZoningAliasNumMembers.ro INTEGER .1.3.6.1.4.1.458.101.94.1.14.1.2 |
connUnitZoningAliasNumAliasesThe number of aliases defined in this
table.ro INTEGER .1.3.6.1.4.1.458.101.94.1.14.1.3 |
connUnitZoningAliasNameThe alias name.ro DisplayString .1.3.6.1.4.1.458.101.94.1.14.1.4 |
connUnitZoningAliasNumMembersNumber of members in the alias:
connUnitZoningAliasName.ro INTEGER .1.3.6.1.4.1.458.101.94.1.14.1.5 |
connUnitZoningAliasMemberIdTypeType of alias member ID:
1- Port WWN
2- Domain & Port ID
3- FC Address
Others: reserved.ro INTEGER .1.3.6.1.4.1.458.101.94.1.14.1.6 |
connUnitZoningAliasMemberIDID of the alias member based on
connUnitZoningAliasMemberIdType.ro FcGlobalId .1.3.6.1.4.1.458.101.94.1.14.1.7 |
trapReg OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94.2 |
trapMaxClientsThe maximum number of SNMP trap recipients
supported by the connectivity unit.ro INTEGER .1.3.6.1.4.1.458.101.94.2.1 |
trapClientCountThe current number of rows in the trap table.ro INTEGER .1.3.6.1.4.1.458.101.94.2.2 |
trapRegTableA table containing a row for each IP address/port
number that traps will be sent to. SEQUENCE OF TrapRegEntry .1.3.6.1.4.1.458.101.94.2.3 |
trapRegEntryIp/Port pair for a specific client. TrapRegEntry .1.3.6.1.4.1.458.101.94.2.3.1 |
trapRegIpAddressThe Ip address of a client registered for
traps.ro IpAddress .1.3.6.1.4.1.458.101.94.2.3.1.1 |
trapRegPortThe UDP port to send traps to for this host.
Normally this would be the standard trap port
(162). This object is an index and must be
specified to create a row in this table.ro INTEGER .1.3.6.1.4.1.458.101.94.2.3.1.2 |
trapRegFilterThis value defines the trap severity
filter for this trap host. The connUnit will send
traps to this host that have a severity level
less than or equal to this value.
The default value of this object is 'warning'.rw FcEventSeverity .1.3.6.1.4.1.458.101.94.2.3.1.3 |
trapRegRowStateSpecifies the state of the row.
rowDestroy
READ: Can never happen.
WRITE: Remove this row from the table.
rowInactive
READ: Indicates that this row does exist, but
that traps are not enabled to be sent to the
target.
WRITE: If the row does not exist, and the agent
allows writes to the trap table, then a new
row is created. The values of the optional
columns will be set to default values. Traps are
not enabled to be sent to the target. If the row
already existed, then traps are disabled from being
sent to the target.
rowActive
READ: Indicates that this row exists, and that traps
are enabled to be sent to the target.
WRITE: If the row does not exist, and the agent
allows writes to the trap table, then a new row is
created. The values of the optional columns will be
set to default values. Traps are enabled to be sent
to the target. If the row already exists, then traps
are enabled to be sent to the target.
A value of rowActive or rowInactive must be specified to
create a row in the table.rw Enumeration .1.3.6.1.4.1.458.101.94.2.3.1.4 |
revisionNumberThis is the revision number for this MIB. The
format of the revision value is as follows
(0) = high order major revision number
(1) = low order major revision number
(2) = high order minor revision number
(3) = low order minor revision number
The value will be stored as an ASCII value. The
following is the current value of this object.
(0) = '0'
(1) = '4'
(2) = '0'
(3) = '0'
This defines a revision of 04.00ro DisplayString .1.3.6.1.4.1.458.101.94.3 |
statSet OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94.4 |
connUnitPortStatTableA list of statistics for the fabric port types. SEQUENCE OF ConnUnitPortStatEntry .1.3.6.1.4.1.458.101.94.4.5 |
connUnitPortStatEntryAn entry describing port statistics. ConnUnitPortStatEntry .1.3.6.1.4.1.458.101.94.4.5.1 |
connUnitPortStatUnitIdThe connUnitId of the connectivity unit
that contains this port stat table.ro FcGlobalId .1.3.6.1.4.1.458.101.94.4.5.1.1 |
connUnitPortStatIndexA unique value among all entries in this
table having the same connUnitPortStatUnitId,
between 1 and
connUnitNumPort[connUnitPortStatUnitId].ro INTEGER .1.3.6.1.4.1.458.101.94.4.5.1.2 |
connUnitPortStatCountErrorA count of the errors that have occured
on this port.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.3 |
connUnitPortStatCountTxObjectsThe number of frames/packets/IOs/etc that have been transmitted
by this port. Note: A Fibre Channel frame starts with SOF and
ends with EOF. FC loop devices should not count frames passed
through. This value represents the sum total for all other Tx
objects.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.4 |
connUnitPortStatCountRxObjectsThe number of frames/packets/IOs/etc that have been received
by this port. Note: A Fibre Channel frame starts with SOF and
ends with EOF. FC loop devices should not count frames passed
through. This value represents the sum total for all other Rx
objects.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.5 |
connUnitPortStatCountTxElementsThe number of octets or bytes that have been transmitted
by this port. One second periodic polling of the port. This
value is saved and compared with the next polled value to
compute net throughput. Note, for Fibre Channel, ordered
sets are not included in the count.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.6 |
connUnitPortStatCountRxElementsThe number of octets or bytes that have been received.
by this port. One second periodic polling of the port. This
value is saved and compared with the next polled value to
compute net throughput. Note, for Fibre Channel, ordered
sets are not included in the count.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.7 |
connUnitPortStatCountBBCreditZeroCount of transitions in/out of BBcredit zero state.
The other side is not providing any credit. Note,
this is a Fibre Channel stat only.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.8 |
connUnitPortStatCountInputBuffersFullCount of occurrences when all input buffers of a
port were full and outbound buffer-to-buffer credit
transitioned to zero. There is no credit to
provide to other side. Note, this is a Fibre Channel
stat only.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.9 |
connUnitPortStatCountFBSYFramesCount of times that FBSY was returned to this port as a
result of a frame that could not be delivered to the other
end of the link. This occurs if either the Fabric or the
destination port is temporarily busy. Port can only occur
on SOFc1 frames (the frames that establish a connection).
Note, this is a Fibre Channel only stat. This is the sum
of all classes. If you cannot keep the by class counters,
then keep the sum counters.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.10 |
connUnitPortStatCountPBSYFramesCount of times that PBSY was returned to this port as a
result of a frame that could not be delivered to the other
end of the link. This occurs if the destination port is
temporarily busy. PBSY can only occur on SOFc1 frames
(the frames that establish a connection). Note, this is
a Fibre Channel only stat.This is the sum
of all classes. If you cannot keep the by class counters,
then keep the sum counters.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.11 |
connUnitPortStatCountFRJTFramesCount of times that FRJT was returned to this port as a
result of a Frame that was rejected by the fabric. Note,
This is the total for all classes and is a Fibre Channel
only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.12 |
connUnitPortStatCountPRJTFramesCount of times that FRJT was returned to this port as a
result of a Frame that was rejected at the destination
N_Port. Note, This is the total for all classes and is
a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.13 |
connUnitPortStatCountClass1RxFramesCount of Class 1 Frames received at this port. Note, this
is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.14 |
connUnitPortStatCountClass1TxFramesCount of Class 1 Frames transmitted out this port. Note,
this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.15 |
connUnitPortStatCountClass1FBSYFramesCount of times that FBSY was returned to this port as a
result of a Class 1 Frame that could not be delivered to the
other end of the link. This occurs if either the Fabric or the
destination port is temporarily busy. FBSY can only occur on
SOFc1 frames (the frames that establish a connection). Note,
this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.16 |
connUnitPortStatCountClass1PBSYFramesCount of times that PBSY was returned to this port as a result
of a Class 1 Frame that could not be delivered to the other end
of the link. This occurs if the destination N_Port is temporarily
busy. PBSY can only occur on SOFc1 frames (the frames that
establish a connection). Note, this is a Fibre Channel only
stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.17 |
connUnitPortStatCountClass1FRJTFramesCount of times that FRJT was returned to this port as a result
of a Class 1 Frame that was rejected by the fabric. Note, this
is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.18 |
connUnitPortStatCountClass1PRJTFramesCount of times that FRJT was returned to this port as a result
of a Class 1 Frame that was rejected at the destination N_Port.
Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.19 |
connUnitPortStatCountClass2RxFramesCount of Class 2 Frames received at this port. Note, this
is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.20 |
connUnitPortStatCountClass2TxFramesCount of Class 2 Frames transmitted out this port. Note,
this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.21 |
connUnitPortStatCountClass2FBSYFramesCount of times that FBSY was returned to this port as a
result of a Class 2 Frame that could not be delivered to the
other end of the link. This occurs if either the Fabric or the
destination port is temporarily busy. FBSY can only occur on
SOFc1 frames (the frames that establish a connection). Note,
this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.22 |
connUnitPortStatCountClass2PBSYFramesCount of times that PBSY was returned to this port as a result
of a Class 2 Frame that could not be delivered to the other end
of the link. This occurs if the destination N_Port is temporarily
busy. PBSY can only occur on SOFc1 frames (the frames that
establish a connection). Note, this is a Fibre Channel only
stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.23 |
connUnitPortStatCountClass2FRJTFramesCount of times that FRJT was returned to this port as a result
of a Class 2 Frame that was rejected by the fabric. Note, this
is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.24 |
connUnitPortStatCountClass2PRJTFramesCount of times that FRJT was returned to this port as a result
of a Class 2 Frame that was rejected at the destination N_Port.
Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.25 |
connUnitPortStatCountClass3RxFramesCount of Class 3 Frames received at this port. Note, this
is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.26 |
connUnitPortStatCountClass3TxFramesCount of Class 3 Frames transmitted out this port. Note,
this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.27 |
connUnitPortStatCountClass3DiscardsCount of Class 3 Frames that were discarded upon reception
at this port. There is no FBSY or FRJT generated for Class 3
Frames. They are simply discarded if they cannot be delivered.
Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.28 |
connUnitPortStatCountRxMulticastObjectsCount of Multicast Frames or Packets received at this port.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.29 |
connUnitPortStatCountTxMulticastObjectsCount of Multicast Frames or Packets transmitted out this port.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.30 |
connUnitPortStatCountRxBroadcastObjectsCount of Broadcast Frames or Packets received at this port.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.31 |
connUnitPortStatCountTxBroadcastObjectsCount of Broadcast Frames or Packets transmitted out this port.
On a Fibre Channel loop, count only OPNr frames generated.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.32 |
connUnitPortStatCountRxLinkResetsCount of Link resets. This is the number of LRs received. Note, this
is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.33 |
connUnitPortStatCountTxLinkResetsCount of Link resets. This is the number LRs transmitted. Note, this
is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.34 |
connUnitPortStatCountNumberLinkResetsCount of Link resets and LIPs detected at this port.
The number times the reset link protocol is initiated.
These are the count of the logical resets, a count of the
number of primatives. Note, this is a Fibre Channel only
stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.35 |
connUnitPortStatCountRxOfflineSequencesCount of Offline Primitive OLS received at this port.
Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.36 |
connUnitPortStatCountTxOfflineSequencesCount of Offline Primitive OLS transmitted by this port.
Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.37 |
connUnitPortStatCountNumberOfflineSequencesCount of Offline Primitive sequence received at this port.
Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.38 |
connUnitPortStatCountLinkFailuresCount of link failures. This count is part of the Link Error
Status Block (LESB). (FC-PH 29.8). Note, this is a Fibre
Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.39 |
connUnitPortStatCountInvalidCRCCount of frames received with invalid CRC. This count is
part of the Link Error Status Block (LESB). (FC-PH 29.8). Loop
ports should not count CRC errors passing through when
monitoring. Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.40 |
connUnitPortStatCountInvalidTxWordsCount of invalid transmission words received at this
port. This count is part of the Link Error Status Block (LESB).
(FC-PH 29.8). Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.41 |
connUnitPortStatCountPrimitiveSequenceProtocolErrorsCount of primitive sequence protocol errors detected at
this port. This count is part of the Link Error Status
Block (LESB). (FC-PH 29.8). Note, this is a Fibre Channel
only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.42 |
connUnitPortStatCountLossofSignalCount of instances of signal loss detected at port.
This count is part of the Link Error Status Block (LESB).
(FC-PH 29.8). Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.43 |
connUnitPortStatCountLossofSynchronizationCount of instances of synchronization loss detected at port.
This count is part of the Link Error Status Block (LESB).
(FC-PH 29.8). Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.44 |
connUnitPortStatCountInvalidOrderedSetsCount of invalid ordered sets received at port. This count
is part of the Link Error Status Block (LESB). (FC-PH 29.8).
Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.45 |
connUnitPortStatCountFramesTooLongCount of frames received at this port where the
frame length was greater than what was agreed to in
FLOGI/PLOGI. This could be caused by losing the end of
frame delimiter. Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.46 |
connUnitPortStatCountFramesTruncatedCount of frames received at this port where the
frame length was less than the minimum indicated by the
frame header - normally 24 bytes, but it could be more if the
DFCTL field indicates an optional header should have been
present. Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.47 |
connUnitPortStatCountAddressErrorsCount of frames received with unknown addressing.
e.x. unknown SID or DID. the SID or DID is not known to the
routing algorithm. Note. this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.48 |
connUnitPortStatCountDelimiterErrorsCount of invalid frame delimiters received at this
port. An example is a frame with a class 2 start and and a
class 3 at the end. Note, this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.49 |
connUnitPortStatCountEncodingDisparityErrorsCount of disparity errors received at this port. Note,
this is a Fibre Channel only stat.ro OCTET STRING .1.3.6.1.4.1.458.101.94.4.5.1.50 |
connUnitServiceSet OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94.5 |
connUnitServiceScalars OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94.5.1 |
connUnitSnsMaxEntryThe current number of entries in the table.ro INTEGER .1.3.6.1.4.1.458.101.94.5.1.1 |
connUnitPlatformMaxEntryThe maximum number of entries in the platform table.ro INTEGER .1.3.6.1.4.1.458.101.94.5.1.2 |
connUnitServiceTables OBJECT IDENTIFIER .1.3.6.1.4.1.458.101.94.5.2 |
connUnitSnsTableThis table contains an entry for each object registered with
this port in the switch. SEQUENCE OF ConnUnitSnsEntry .1.3.6.1.4.1.458.101.94.5.2.1 |
connUnitSnsEntryThe Simple Name Server table for the port represented by
ConnUnitSnsPortIndex . ConnUnitSnsEntry .1.3.6.1.4.1.458.101.94.5.2.1.1 |
connUnitSnsIdThe connUnitId of the connectivity unit
that contains this Name Server table.ro OCTET STRING .1.3.6.1.4.1.458.101.94.5.2.1.1.1 |
connUnitSnsPortIndexThe physical port number of this SNS table entry.
Each physical port has an SNS table with 1-n entries
indexed by ConnUnitSnsPortIdentifier (port address)ro INTEGER .1.3.6.1.4.1.458.101.94.5.2.1.1.2 |
connUnitSnsPortIdentifierThe Fibre Channel ID for this entry in the SNS table.ro FcAddressId .1.3.6.1.4.1.458.101.94.5.2.1.1.3 |
connUnitSnsPortNameThe Port WWN for this entry in the SNS table.ro FcNameId .1.3.6.1.4.1.458.101.94.5.2.1.1.4 |
connUnitSnsNodeNameThe Node Name for this entry in the SNS table.ro FcNameId .1.3.6.1.4.1.458.101.94.5.2.1.1.5 |
connUnitSnsClassOfSvcThe Classes of Service offered by this entry in the SNS table.
This is a bit mask where each bit that represents the class
of service is set to a value of one if the class is supported.
Class 1 is bit zero.ro OCTET STRING .1.3.6.1.4.1.458.101.94.5.2.1.1.6 |
connUnitSnsNodeIPAddressThe IPv6 formatted address of the Node for this entry in the SNS table.ro OCTET STRING .1.3.6.1.4.1.458.101.94.5.2.1.1.7 |
connUnitSnsProcAssocThe Process Associator for this entry in the SNS table.ro OCTET STRING .1.3.6.1.4.1.458.101.94.5.2.1.1.8 |
connUnitSnsFC4TypeThe FC-4 Types supported by this entry in the SNS table.ro OCTET STRING .1.3.6.1.4.1.458.101.94.5.2.1.1.9 |
connUnitSnsPortTypeThe Port Type of this entry in the SNS table.ro OCTET STRING .1.3.6.1.4.1.458.101.94.5.2.1.1.10 |
connUnitSnsPortIPAddressThe IPv6 formatted address of this entry in the SNS table.ro OCTET STRING .1.3.6.1.4.1.458.101.94.5.2.1.1.11 |
connUnitSnsFabricPortNameThe Fabric Port name of this entry in the SNS table.ro FcNameId .1.3.6.1.4.1.458.101.94.5.2.1.1.12 |
connUnitSnsHardAddressThe Hard ALPA of this entry in the SNS table.ro FcGlobalId .1.3.6.1.4.1.458.101.94.5.2.1.1.13 |
connUnitSnsSymbolicPortNameThe Symbolic Port Name of this entry in the SNS table.ro DisplayString .1.3.6.1.4.1.458.101.94.5.2.1.1.14 |
connUnitSnsSymbolicNodeNameThe Symbolic Node Name of this entry in the SNS table.ro DisplayString .1.3.6.1.4.1.458.101.94.5.2.1.1.15 |
connUnitPlatformTable SEQUENCE OF ConnUnitPlatformEntry .1.3.6.1.4.1.458.101.94.5.2.2 |
connUnitPlatformEntry ConnUnitPlatformEntry .1.3.6.1.4.1.458.101.94.5.2.2.1 |
connUnitPlatformIndexUnique table index for each platform.
Valid values are between 1 and
connUnitPlatformsMaxEntry.ro INTEGER .1.3.6.1.4.1.458.101.94.5.2.2.1.1 |
connUnitPlatformNodeIndexUnique table index for each platform
node. Valid values are between 1 and
connUnitPlatformsNumNodes.ro INTEGER .1.3.6.1.4.1.458.101.94.5.2.2.1.2 |
connUnitPlatformUnitIDThe connUnitId of the connectivity
unit that contains this Platform table.ro FcGlobalId .1.3.6.1.4.1.458.101.94.5.2.2.1.3 |
connUnitPlatformNameThe platform name. May be either a
readable string or a unique ID format
as specified in the FC-GS-4 draft
standard.ro OCTET STRING .1.3.6.1.4.1.458.101.94.5.2.2.1.4 |
connUnitPlatformTypeThe platform type.ro FcUnitType .1.3.6.1.4.1.458.101.94.5.2.2.1.6 |
connUnitPlatformLabelAn administratively assigned symbolic
name for the platform. The Platform
Label shall only contain print-able
ASCII characters.ro DisplayString .1.3.6.1.4.1.458.101.94.5.2.2.1.7 |
connUnitPlatformDescriptionA textual description of the platform.
This value should include the full name
and version identification of
the platform's hardware type and
software operating system. The
Platform Description shall only contain
printable ASCII characters.ro DisplayString .1.3.6.1.4.1.458.101.94.5.2.2.1.8 |
connUnitPlatformLocationThe physical location of the platform
(e.g., telephone closet, 3rd floor). The
Platform Location shall only
contain printable ASCII characters.ro DisplayString .1.3.6.1.4.1.458.101.94.5.2.2.1.9 |
connUnitPlatformManagementUrlPrimary management URL for the
platform. If the platform registers
more than one URL, then this URL is
equal to the first in the list.ro DisplayString .1.3.6.1.4.1.458.101.94.5.2.2.1.10 |
connUnitPlatformNumNodesNumber of nodes contained in the
platform.ro INTEGER .1.3.6.1.4.1.458.101.94.5.2.2.1.11 |
connUnitPlatformNodeNameThe name (WWN - world wide name)
of the node contained by the platform.ro FcGlobalId .1.3.6.1.4.1.458.101.94.5.2.2.1.12 |