MIB Catalog

This is the MIB Module for Symmetricom's enterprise specific parameters

This is the MIB Module for Symmetricom's enterprise specific parameters.

Symmetricom, Inc. Common 10M input/output status and configuration

Symmetricom, Inc. Common DTI status and configuration

This is the Symmetricom Common MIB for Ethernet and IP configuration and status. It has three main nodes: 1. Ethernet configuration 2. IP configuration and status (including routing and firewall) 3. V

Symmetricom, Inc. Common input/output PPS status and configuration.

Symmetricom, Inc. Common PPS/TOD input/output status and configuration

This is the Symmetricom PTPv2 MIB. It has two main nodes: PTPv2 status and PTPv2 configuration.

This is the Symmetricom Common MIB for clock date and time. It has a status node and a configuration node.

This is the Symmetricom Common MIB for the configuration and status monitoring of E1/T1 ports in the system. It is one of the MIBs under the symmPhysicalSignal node. This MIB is organized into two mai

Symmetricom common entity extension MIB

This is the Symmetricom common MIB for GNSS/GPS. This MIB has two main nodes: gnssStatus and gnssConfig. The gnssStatus node has a port status table, a satellite table, and a scalar for GNSS current p

Symmetricom Common interface extension MIB. This extension contains additional information for the interface entry in the public 'SNMP MIB-2 Interfaces.'

This is the Symmetricom NTP MIB. It has two main nodes: NTP status and NTP configuration.

This is the Symmetricom NTP Client MIB. It has two main nodes: NTPClient status and NTPClient configuration.

This is the Symmetricom Common MIB for output generation. It specifies output port behavior (on | squelch | AIS) when the system clock state is not Normal Tracking. TP5K defines five clock states: war

This is the Symmetricom Common MIB for SyncE. It has two main nodes: SyncE status and SyncE configuration.