SYMMGNSS
AI MIB Summary
The SYMMGNSS MIB module enables monitoring and configuration of Symmetricom GNSS receivers by exposing real-time satellite acquisition status, current position modes, and operational parameters via the gnssStatus and gnssConfig nodes. It facilitates the retrieval of port states, satellite constellation data, and the adjustment of position settings to ensure precise time and frequency synchronization.
This is the Symmetricom common MIB for GNSS/GPS. This MIB has two main nodes: gnssStatus and gnssConfig. The gnssStatus node has a port status table, a satellite table, and a scalar for GNSS current position mode. The gnssConfig node has a configuration table, position setting table, and a present position table.
Main OID:
symmGNSS.1.3.6.1.4.1.9070.1.2.5.2.1
48
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
symmGNSSThis is the Symmetricom common MIB for GNSS/GPS. This MIB has two main nodes: gnssStatus and gnssConfig. The gnssStatus node has a port status table, a satellite table, and a scalar for GNSS current position mode. The gnssConfig node has a configuration table, position setting table, and a present position table. MODULE-IDENTITY .1.3.6.1.4.1.9070.1.2.5.2.1 |
gnssStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.1.1 |
gnssPortStatusTableGNSS port status table. It contains port name and the current GNSS receiver mode for the specified port. SEQUENCE OF GnssPortStatusEntry .1.3.6.1.4.1.9070.1.2.5.2.1.1.1 |
gnssPortStatusEntryAn entry of the GNSS port status table. Table index is ifIndex. GnssPortStatusEntry .1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1 |
gnssPortStatusIndexLocal index of the GNSS port status table. Integer32 .1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.1 |
gnssPortStatusPortNameThe name of the specified GNSS port. In TP5000 system there can be one or two GNSS ports. One of them is always called GPS, and the additional one (if present) is either called GPS or GNSS. A port called GNSS indicates that it may be non-GPS or a multi-mode GNSS receiver port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.2 |
gnssPortCurrentGNSSThis value indicates whether the specified GNSS port is used. Its value is Yes (1) or No (2). If it is No, the port is considered absent in the system.ro YESVALUETYPE .1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.3 |
gnssPortCurrentPosModeCurrent position mode of the GNSS receiver. It can be surveying (1), position hold (2), or manual (3)ro GNSSCURPOSITIONMODE .1.3.6.1.4.1.9070.1.2.5.2.1.1.1.1.4 |
gnssSatTableGNSS satellite table. This table lists information about the satellites being tracked by the GNSS receiver. SEQUENCE OF GnssSatEntry .1.3.6.1.4.1.9070.1.2.5.2.1.1.2 |
gnssSatEntryAn entry of the GNSS satellite tracking table. Table index is local index gnssSatIndex. GnssSatEntry .1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1 |
gnssSatIndexThis is the local index of the table of the GNSS satellites GPS, GLONASS, Galileo being tracked.ro Integer32 .1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.1 |
gnssSatNumGNSS satellite number. This is the identification number of the GNSS satellite being tracked. This information is obtained from the GNSS satellite ephemeris or almanac.ro INTEGER .1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.2 |
gnssSatSNRSignal-to-Noise Ratio. This is the GNSS signal to noise ratio measured by the GNSS receiver.ro INTEGER .1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.3 |
gnssSatHealthGNSS satellite health state. It can be healthy (1) or unhealthy (2). This data is obtained from the GNSS receiver.ro GNSSHealthStatus .1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.4 |
gnssSatAzimuthGNSS satellite azimuthal angle clockwise from true north. Range of the azimuth is 0 to 360 degrees.ro INTEGER .1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.5 |
gnssSatElevationGNSS satellite elevation angle relative to the horizon. Range of the elevation angle is 0 to 90 degrees.ro INTEGER .1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.6 |
gnssSatPortNameThe gnss port name. This is defined in gnssConfigTable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.1.2.1.7 |
gnssPresentPosTableCurrent position table. This table shows the position of the GNSS receiver antenna. In the automatic mode, the position is calculated by the GNSS receiver. In the manual mode, the position is the manually entered position in gnssPosSettingTable. SEQUENCE OF GnssPresentPosEntry .1.3.6.1.4.1.9070.1.2.5.2.1.1.3 |
gnssPresentPosEntryAn entry of the current position table. Table index is the ifIndex. GnssPresentPosEntry .1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1 |
gnssPresentPosIndexLocal index that corresponds to the ifIndex. For TP5K there are up to two GNSS port entries. Integer32 .1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.1 |
gnssPresentPosLatLatitude of the GNSS receiver antenna position for the specified GNSS port. Its format is Ndd:mm:ss.ss or Sdd:mm:ss.ss.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.2 |
gnssPresentPosLongLongitude of the GNSS receiver antenna position for the specified GNSS port. Its format is Eddd:mm:ss.ss or Wddd:mm:ss.ss.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.3 |
gnssPresentPosHeightAltitude (height) in meters of the GNSS receiver antenna position for the specified GNSS port. Its format is +/-hhhh.h.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.1.3.1.4 |
gnssConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.1.2 |
gnssConfigurationTableThe GNSS configuration table. SEQUENCE OF GnssConfigurationEntry .1.3.6.1.4.1.9070.1.2.5.2.1.2.1 |
gnssConfigurationEntryAn entry of the GNSS configuration table. Table index is ifIndex. GnssConfigurationEntry .1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1 |
gnssConfigurationIndexLocal index of the GNSS port configuration table. Integer32 .1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.1 |
gnssConfigurationPortNameName of the specified GNSS port. For TP5000 currently there are two names for a GNSS port: GPS or GNSS. Use the name on the equipment front panel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.2 |
gnssConfigurationTrackModeGNSS receiver mode. This depends on the GNSS receiver. For the VCOM receiver, there are four modes: beidou (1), gps (2), priorityBeidou (4), which is automatic with GPS priority, and priorityGps (5) which is automatic with Beidou priority. For Ublox receiver, gnssGPS(17),gnssGlonass(18),gnssGPSGlonass(19),gnssGalileo(20), gnssGPSGalileo(21),gnssGlonassGalileo(22),gnssGPSGlonassGalileo(23), gnssBeidou(24), gnssBeidouGPS(25), gnssBeidouGlonass(26), gnssBeidouGlonassGPS(27),gnssBeidouGalileo(28), gnssBeidouGalileoGPS(29), gnssBeidouGalileoGlonass(30), gnssBeidouGalileoGlonassGPS(31)rw GNSSReceiverMode .1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.3 |
gnssConfigurationPosModeGNSS receiver position survey mode. It can be either automatic (1) or manual (2). When the position survey mode is manual, the user must configure the position.rw GNSSPositionMode .1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.4 |
gnssConfigurationElevMaskGNSS elevation mask. The range is 5 to 45 degrees. This value is actually the lower limit of the elevation mask. The upper limit is 90 degrees. If the elevation mask is set to 5 degrees, the elevation coverage is from 5 to 90 degrees. If the elevation mask is set to 30 degrees, the elevation coverage is from 30 to 90 degrees.rw Integer32 .1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.5 |
gnssConfigurationCableDelayGNSS antenna cable delay compensation in nanoseconds. Range is 0 to 999,999 nanoseconds. This value should be as close to the actual antenna cable delay as possible. Residual error will directly affect the time/phase accuracy.rw Integer32 .1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.6 |
gnssConfigurationLeapSecondsLeapseconds used for GLONASS only satellite to set user-provided value. Range 20-255. This leapseconds not applicable for GPS port. Note: zero (0) indicates NotApplicablerw Integer32 .1.3.6.1.4.1.9070.1.2.5.2.1.2.1.1.7 |
gnssPosSettingTableThis table is used to manually set the GNSS receiver antenna position for the specified GNSS port. SEQUENCE OF GnssPosSettingEntry .1.3.6.1.4.1.9070.1.2.5.2.1.2.2 |
gnssPosSettingEntryAn entry of the GNSS position setting table. Table index is ifIndex. GnssPosSettingEntry .1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1 |
gnssPosSettingIndexLocal index that corresponds to the ifIndex. For TP5K there are up to two GNSS port entries. Integer32 .1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.1 |
gnssPosSettingLatManual setting for the latitude of the GNSS receiver antenna for the specified GNSS port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.2 |
gnssPosSettingLongManual setting for the longitude of the GNSS receiver antenna for the specified GNSS port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.3 |
gnssPosSettingHeightManual setting for the height of the GNSS receiver antenna for the specified GNSS port.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.1.2.2.1.4 |
gnssConformanceThis subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.1.3 |
gnssCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.1.3.1 |
gnssBasicComplianceThe compliance statement for SNMP entities which have GNSS input. Unknown .1.3.6.1.4.1.9070.1.2.5.2.1.3.1.1 |
gnssUocGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.1.3.2 |
gnssStatusGroupA collection of objects providing information applicable to GNSS status group. Unknown .1.3.6.1.4.1.9070.1.2.5.2.1.3.2.1 |
gnssConfigGroupA collection of objects providing information applicable to GNSS configuration group. Unknown .1.3.6.1.4.1.9070.1.2.5.2.1.3.2.2 |
gnssSVGroupA collection of objects providing information applicable to GNSS satellite positions group. Unknown .1.3.6.1.4.1.9070.1.2.5.2.1.3.2.3 |
gnssConfigPosGroupA collection of objects providing information applicable to GNSS position configuration group. Unknown .1.3.6.1.4.1.9070.1.2.5.2.1.3.2.4 |
gnssCurrentPosGroupA collection of objects providing information applicable to GNSS current position group. Unknown .1.3.6.1.4.1.9070.1.2.5.2.1.3.2.5 |