SYMME1T1

This is the Symmetricom Common MIB for the configuration and status monitoring of E1/T1 ports in the system. It is one of the MIBs under the symmPhysicalSignal node. This MIB is organized into two main nodes: input and output. Each node is further has two tables, one for status and one for configuration.

Main OID:

symmE1T1.1.3.6.1.4.1.9070.1.2.5.2.2

Objects

Active

Status

Dependencies

Imported Objects

Objects

44 total

Object Name	Syntax	OID
symmE1T1This is the Symmetricom Common MIB for the configuration and status monitoring of E1/T1 ports in the system. It is one of the MIBs under the symmPhysicalSignal node. This MIB is organized into two main nodes: input and output. Each node is further has two tables, one for status and one for configuration. MODULE-IDENTITY `.1.3.6.1.4.1.9070.1.2.5.2.2`	MODULE-IDENTITY	`.1.3.6.1.4.1.9070.1.2.5.2.2`
e1T1input OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.1`
inputE1T1Status OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.1.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.1`
e1T1InputStatusTableThis table contains status information for each E1/T1 input port. SEQUENCE OF E1T1InputStatusEntry `.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1`	SEQUENCE OF E1T1InputStatusEntry	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1`
e1T1InputStatusEntryAn entry of the e1T1InputStatusTable. Table index is ifIndex (port/interface index). Each entry has three parameters for the specified E1/T1 input port: 1. Port enable status (enable or disable) 2. Current value of the incoming SSM 3. Port status E1T1InputStatusEntry `.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1`	E1T1InputStatusEntry	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1`
e1T1InputStatusIndexLocal index of the E1/T1 input status table. Integer32 `.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.1`	Integer32	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.1`
e1T1InputPQLCurValueV1The current PQL value of the incoming SSM on this input port.ro TP5000PQLVALUE `.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.3`	TP5000PQLVALUE	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.3`
e1T1InputPortStatusV1The port status of the specified input E1/T1 input port. Possible values are On (1) and Off (2). When the input port state is enabled, port status becomes on. When input port state is disabled, input port status is off.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.4`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.4`
e1T1InputConfig OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2`
e1T1InputConfigTableConfiguration Table for E1/T1 input ports SEQUENCE OF E1T1InputConfigEntry `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1`	SEQUENCE OF E1T1InputConfigEntry	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1`
e1T1InputConfigEntryAn entry of the E1/T1 input configuration table. Table index is ifIndex (port/interface). Each entry has the following configuration parameters for the selected input port: 1. Frame type 2. CRC enable state 3. SSM enable state 4. SSM bit position 5. Default PQL value that can be used to override the input SSM value 6. Zero suppression state E1T1InputConfigEntry `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1`	E1T1InputConfigEntry	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1`
e1T1InputConfigIndexLocal index of the E1/T1 input configuration table. Integer32 `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.1`	Integer32	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.1`
e1T1InputFrameTypeV1E1 or T1 input frame type. Supported frame types include: 1. Freq1544khz (1) 2. Freq2048khz (2) 3. CCS (3) 4. CAS (4) 5. D4 (5) 6. ESF (6) Default frame type is 2048 kHzrw INPUTE1T1FRAMETYPE `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2`	INPUTE1T1FRAMETYPE	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2`
e1T1InputCRCStateV1CRC enable state can be Enable (1) or Disable (2). Disabling the CRC means the CRC in the SSM is not used.rw EnableValue `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3`	EnableValue	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3`
e1T1InputSSMStateV1SSM enable state. It can be Enable (1) or Disable (2). Disabling the SSM means the incoming SSM is not used, and the forced (default) PQL value for this input port will be used during the reference selection. SSM is supported for only three frame types: EFS, CAS with CRC4, and CCA with CRC4. SSM should not be enabled for other frame types. If SSM is enabled for an input port, but the frame type does not support SSM or is not sending a valid SSM, then this input will be disqualified and the input PQL will be set to 'invalid.' The system will go into holdover no other qualified reference is available.rw EnableValue `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.4`	EnableValue	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.4`
e1T1InputSSMBitV1SSM Bit position. The value range is 4 to 8. This parameter is only used for frame types ESF, CCS, or CAS.rw Integer32 `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.5`	Integer32	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.5`
e1T1InputPQLValueV1The user assigned PQL value for the specified input. This PQL value is used when the SSM state is disabled. The range for the user assigned PQL value is 1 to 9.rw TP5000PQLVALUE `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.6`	TP5000PQLVALUE	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.6`
eT1InputZeroSupprV1The number indicates whether zero suppression (ZS) on the input port is enabled or disabled. Valid values are On (1) or Off (2).rw ONVALUETYPE `.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7`	ONVALUETYPE	`.1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7`
e1T1Output OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.2`
e1T1OutputStatus OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.2.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.1`
e1T1OutputStatusTableThis table contains status information for each E1/T1 output port. SEQUENCE OF E1T1OutputStatusEntry `.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1`	SEQUENCE OF E1T1OutputStatusEntry	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1`
e1T1OutputStatusEntryAn entry of the e1T1OutputStatusTable. Table index is ifIndex (port/interface index). Each entry has two parameters for the specified E1/T1 input port: 1. Port status 2. Outgoing SSM value E1T1OutputStatusEntry `.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1`	E1T1OutputStatusEntry	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1`
e1T1OutputStatusIndexLocal index of the E1/T1 output status table. Integer32 `.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.1`	Integer32	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.1`
e1T1OutputPortStatusV1The port status of the specified E1/T1 output port. Possible values are On (1) and Off (2). 'On' means there is signal on the port. For E1/T1 output port it means the system is in normal tracking mode. 'Off' means there is no signal on the port. For E1/T1 output port it means the output is squelched during some clock states.ro DisplayString (SNMPv2-TC) `.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.2`	DisplayString (SNMPv2-TC)	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.2`
e1T1OutputPQLValueV1The PQL value for the specified E1/T1 output port.ro TP5000PQLVALUE `.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.3`	TP5000PQLVALUE	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.3`
e1T1OutputConfig OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2`
e1T1OutputConfigTableThis table contains configuration information for each E1/T1 output port. SEQUENCE OF E1T1OutputConfigEntry `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1`	SEQUENCE OF E1T1OutputConfigEntry	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1`
e1T1OutputConfigEntryAn entry of the e1T1OutputConfigTable. Table index is ifIndex (port/interface index). Each entry has the configuration parameters for the specified E1/T1 output port: 1. Port enable state 2. Frame type 3. CRC enable state 4. SSM enable state 5. SSM bit position 6. Zero suppression on/off state 7. Output port cable length E1T1OutputConfigEntry `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1`	E1T1OutputConfigEntry	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1`
e1T1OutputConfigIndexLocal index of the E1/T1 output configuration table. Integer32 `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.1`	Integer32	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.1`
e1T1OutputStateV1E1/T1 output port enable state. Its value can be Enable (1) or Disable (2). Disabling an output port means no output is generated for that port.rw PORTSTATETYPE `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2`	PORTSTATETYPE	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2`
e1T1OutputFrameTypeV1E1 or T1 output frame type. Supported frame types include: 1. Freq1544khz (1) 2. Freq2048khz (2) 3. CCS (3) 4. CAS (4) 5. D4 (5) 6. ESF (6) Default frame type is 2048 kHz.rw OUTPUTE1T1FRAMETYPE `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.3`	OUTPUTE1T1FRAMETYPE	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.3`
e1T1OutputCRCStateV1CRC enable state can be Enable (1) or Disable (2). Disabling the CRC means that no CRC is generated for the SSM.rw EnableValue `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.4`	EnableValue	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.4`
e1T1OutputSSMStateV1SSM enable state. It can be Enable (1) or Disable (2). Disabling the output SSM means that no SSM is generated for the specified output port.rw EnableValue `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.5`	EnableValue	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.5`
e1T1OutputSSMBitV1SSM Bit position. The value range is 4 to 8. This parameter is only used for frame types ESF, CCS, or CAS.rw Integer32 `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.6`	Integer32	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.6`
e1T1OutputZeroSupprV1The number indicates whether zero suppression (ZS) on the output port is enabled or disabled. Valid values are On (1) or Off (2).rw ONVALUETYPE `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.7`	ONVALUETYPE	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.7`
e1T1OutputLengthV1Output cable length.rw Integer32 `.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8`	Integer32	`.1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8`
e1T1ConformanceThis node contains conformance statement for the symmE1T1 MIB module. OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.3`
e1T1Compliances OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.3.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.3.1`
e1T1BasicComplianceThe compliance statement for SNMP entities which have E1/T1 input/output. Unknown `.1.3.6.1.4.1.9070.1.2.5.2.2.3.1.1`	Unknown	`.1.3.6.1.4.1.9070.1.2.5.2.2.3.1.1`
e1T1UocGroups OBJECT IDENTIFIER `.1.3.6.1.4.1.9070.1.2.5.2.2.3.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.9070.1.2.5.2.2.3.2`
e1T1InputStatusGroupA collection of objects providing information applicable to E1/T1 input status group. Unknown `.1.3.6.1.4.1.9070.1.2.5.2.2.3.2.1`	Unknown	`.1.3.6.1.4.1.9070.1.2.5.2.2.3.2.1`
e11T1InputConfigGroupA collection of objects providing information applicable to E1/T1 input configuration group. Unknown `.1.3.6.1.4.1.9070.1.2.5.2.2.3.2.2`	Unknown	`.1.3.6.1.4.1.9070.1.2.5.2.2.3.2.2`
e11T1OutputStatusGroupA collection of objects providing information applicable to E1/T1 output status group. Unknown `.1.3.6.1.4.1.9070.1.2.5.2.2.3.2.3`	Unknown	`.1.3.6.1.4.1.9070.1.2.5.2.2.3.2.3`
e11T1OutputConfigGroupA collection of objects providing information applicable to E1/T1 output configuration group. Unknown `.1.3.6.1.4.1.9070.1.2.5.2.2.3.2.4`	Unknown	`.1.3.6.1.4.1.9070.1.2.5.2.2.3.2.4`