SYMMCOMMONPTP
This is the Symmetricom PTPv2 MIB. It has two main nodes: PTPv2 status and PTPv2 configuration.
Main OID:
symmPTPv2.1.3.6.1.4.1.9070.1.2.5.1.1
78
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
78 total| Object Name |
|---|
symmPTPv2This is the Symmetricom PTPv2 MIB. It has two main nodes: PTPv2 status and PTPv2 configuration. MODULE-IDENTITY .1.3.6.1.4.1.9070.1.2.5.1.1 |
ptpv2Status OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.1.1 |
ptpv2StatusTableThe PTP status table. This table provides status for the PTP grandmaster operation. SEQUENCE OF Ptpv2StatusEntry .1.3.6.1.4.1.9070.1.2.5.1.1.1.1 |
ptpv2StatusEntryAn entry of the PTPv2 status table. Table index is ifIndex (port and interface index). Ptpv2StatusEntry .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1 |
ptpv2StatusIndexThis is a local index that is not accessible. Range is 1 - 1000. Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.1 |
ptpv2StatusPortEnablePTP port state control used to enable or disable PTP service. Values can be Enable (1) or Disable (2).ro EnableValue .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.2 |
ptpv2StatusClockIDClock ID uniquely identifies a PTP clock at a PTP port. It is a 64-bit identifier. In TP5K system each physical PTP port supports one PTP clock.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.3 |
ptpv2StatusProfilePTP profile supported by the specified PTP port. TP5K system supports the following profiles: (1)Telecom-2008, (2)Default, (3)Hybrid, (4)ITU G.8265.1, (5)Ethernet-default, (6)ITU G.8275.1. (7) ITU G.8275.2 The user guide has descriptions of different profiles and the values of the PTP attributes for each profile.ro PTPPROFILEVALUE .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.4 |
ptpv2StatusClockClassPTP clock class is a quality level indication for a PTP clock. Table 5 in IEEE 1588 v2 defines clock classes for general use. ITU G.8265.1 provides a mapping between PTP clock class and synchronization clock quality level for the ITU telecom profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.5 |
ptpv2StatusClockAccuracyPTP clock accuracy is the expected clock accuracy when the PTP clock is used as a grandmaster. It is used as a selection criterion in the best master clock (BMC) algorithm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.6 |
ptpv2StatusTimescalePTP timescale used by the PTP clock. It can be ARB (2) or PTP (3). If timescale is PTP, the epoch is 1 January 1970 00:00:00 TAI, which is 31 December 1969 23:59:51.999918 UTC.ro PTPTIMESCALETYPE .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.7 |
ptpv2StatusNumClientNumber of PTP clients connected to a PTP port. It value is 0 - 1000.ro INTEGER .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.8 |
ptpv2StatusClientLoadPercentage of PTP client load on a PTP port. This is the percentage of connected client relative to the maximum number of clients that the port can support.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.1.1.1.1.9 |
ptpv2ClientDataTablePTP client data table contains raw data for PTP clients. SEQUENCE OF Ptpv2ClientDataEntry .1.3.6.1.4.1.9070.1.2.5.1.1.1.2 |
ptpv2ClientDataEntryAn entry to the client data table. Table index is the local index. Ptpv2ClientDataEntry .1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1 |
ptpv2ClientDataIndexClient data index is a local index. This local index is also called client number.ro Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1.1 |
ptpv2ClientDataSync interval Client Data is a string of raw data for the entry. It contains the following PTP client information: 1.Module ID (where the client is physically connected) 2.Port ID (where the client is physically connected) 3.Client IP address 4.VLAN ID 5.VLAN priority 6.Client Clock ID 7.Client mode (Clients in TP5K client list are either dynamic or static. Dynamic clients are regular clients that negotiate with GM, and they can come and go from the client list. TP5K also support 10 or 16 static clients that are always on the client list and the GM will always send PTP packets to them whether they respond or not.) 8.Announce interval 9.Sync Interval 10.Delay response intervalro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.1.1.2.1.2 |
ptpv2Config OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.1.2 |
ptpv2CommonTableThe PTP common parameter table has PTP parameters that are not specific to the unicast or multicast addressing mode. SEQUENCE OF Ptpv2CommonEntry .1.3.6.1.4.1.9070.1.2.5.1.1.2.1 |
ptpv2CommonEntryAn entry of the PTP common parameter table. Table index is ifIndex (port and interface index). Ptpv2CommonEntry .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1 |
ptpv2CommonIndexThis is a local index of the PTP common parameter table. Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.1 |
ptpv2ProfileSelect a PTP profile for the specified PTP port. TP5K system supports five IPv4 'profiles': (1) Telecom2008, (2) Default, (3) Hybrid, (4) ITU8265one, (5) Ethernet-default (6) ITU8275one,(7) ITU G.8275.2 The user guide has descriptions, different profiles, and the values of the PTP attributes for each profile.rw PTPPROFILEVALUE .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.2 |
ptpv2ClockIDClock ID uniquely identifies a PTP clock at a PTP port. It is a 64-bit identifier, and its format is xx:xx:xx:xx:xx:xx:xx:xx. In TP5K system, each physical PTP port supports one PTP clock.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.3 |
ptpv2Priority1Attribute Priority1 for the specified PTP port. It is used in BMC algorithm as a selection criterion. Its range is 0-255, unless restricted by a PTP profile. Default value is 128.rw Unsigned32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.4 |
ptpv2Priority2Attribute Priority2 for the specified PTP port. It is used in BMC algorithm as a selection criterion. Its range is 0-255, unless restricted by a PTP profile. Default value is 128.rw Unsigned32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.5 |
ptpv2DomainThe PTP domain of the specified PTP port. PTP domain is a logical grouping of PTP clocks. All the PTP clocks in the same domain are synchronized to each other using the PTP protocol. The range of the PTP domain is 0-255. Default value is 0. For ITU telecom profile, range is 4-23 and default is 4.rw Unsigned32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.6 |
ptpv2DSCPStateDifferentiated service code point (DSCP) state for the specified PTP port. It can be either Enable (1) or Disable (2). Default value is disable. If DSCP state is Enable, the QoS field will have a configured DSCP value.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.7 |
ptpv2DSCPValueDSCP value for PTP packets leaving this port. Value range is 0-63, and default value is 0.rw Unsigned32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.8 |
ptpv2StatePTP packet service state for the specified PTP port. It can be either Enable (1) or Disable (2). Default value is Enable. When PTP is disabled at a port, it does not transmit or respond to PTP packets, and all alarms associated with PTP for this port are cleared.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.9 |
ptpv2MaxClientThe maximum number of PTP clients that are allowed to be connected to this PTP port. Max number of clients (1000 is available in Extended mode only and 1000/1500 is available on ptp client license, otherwise 500).rw Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.10 |
ptpv2AnnounceLimitThe minimum PTP Announce message transmission interval (inverse of the maximum PTP Announce message transmission rate) that the port will accept. This is the exponent of 2, and the value range is -4 to +4. Default is -3. For telecom profile, the range is -3 to +4 and default is 1. If AnnounceLimit = -4, the minimum Announce message transmission interval is = 2^(-4) = 0.0625 seconds, or the maximum message transmission rate is 16 messages per second.rw INTEGER (-4..4) .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.11 |
ptpv2SyncLimitThe minimum PTP Sync message interval (inverse of the maximum PTP Sync message transmission rate) that the port will accept. This is the exponent of 2, and the value range is -7 to +7 and default is -7. For telecom profile the range is -7 to +4. If SyncLimit = -4, the minimum Sync message transmission interval is = 2^(-4) = 0.0625 seconds, or the maximum message transmission rate is 16 messages per second.rw INTEGER (-7..7) .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.12 |
ptpv2DelayLimitThe minimum PTP Delay_Req message transmission interval that the port will accept (inverse of the maximum PTP Delay_Req message transmission rate). This is the exponent of 2, and the value range is -7 to +7 and default is -7. For telecom profile the range is -7 to +4. If SyncLimit = -4, the minimum Delay_Req message transmission interval is = 2^(-4) = 0.0625 seconds, or the maximum message transmission rate is 16 messages per second.rw INTEGER (-7..7) .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.13 |
ptpv2TwoStepPTP two-step clock enable. Its value can be Enable (1) or Disable (2). Default value is Disable. If it is disabled, the system will use PTP one-step clock.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.14 |
ptpv2MgmtAddrModeThe addressing mode for the PTP management communication between a PTP grandmaster port and PTP clients. It can be either unicast (1) or multicast (2). Default is unicast.rw PTPMGMTADDRTYPE .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.15 |
ptpv2TTLIP header time-to-live (TTL) field for the PTP packets. Range is 1-255. Default value is 64.rw Unsigned32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.16 |
ptpv2AlternateGMPTP alternate master enable state for the specified PTP port. It can be Enable (1) or Disable (2). Default is Disable. When it is disabled, the port is always a master and does not use BMC.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.17 |
ptpv2TimeScalePTP timescale to be used by the PTP clock. It can be Auto (1), ARB (2), or PTP (3). Auto means selecting PTP or ARB depending on the reference mode. If timescale is PTP, the epoch is 1 January 1970 00:00:00 TAI, which is 31 December 1969 23:59:51.999918 UTC.rw PTPTIMESCALETYPE .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.18 |
ptpv2DitherPTP dither state. It can either be Enable (1) or Disable (2). Default is Disable. Dithering is used to randomize packet transmission time to improve performance.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.19 |
ptpv2ServiceLoadAlarmThresholdIt shows percentage (%) of PTP service load alarm thresholdrw Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.1.1.20 |
ptpv2UnicastTableThe PTP unicast configuration table for PTP attributes that are specific to unicast. In TP5K 2.0, only the main shelf supports unicast. SEQUENCE OF Ptpv2UnicastEntry .1.3.6.1.4.1.9070.1.2.5.1.1.2.2 |
ptpv2UnicastEntryAn entry to the PTP unicast configuration table. Table index is ifIndex. The unicast table has two attributes: unicast negotiation state and unicast lease duration limit. Ptpv2UnicastEntry .1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1 |
ptpv2UnicastIndexLocal index of the PTP unicast configuration table. Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.1 |
ptpv2UnicastNegUnicast negotiation state for the specified port. Its value can be Enable (1) or Disable (2).rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.2 |
ptpv2UnicastLeaseDurLimitUnicast least duration limit (in seconds) is the maximum unicast lease duration request that the grandmaster will accept. Its range is 10 to 1000 seconds. Default value is 300 seconds.rw Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.3 |
ptpv2UnicastInterfaceRateTLVSetup PTP interface rate TLV state.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.4 |
ptpv2UnicastLeaseExtensionSetup PTP Lease Extension. Default value 0. Range 0-1000rw Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.2.1.5 |
ptpv2MulticastTableThe PTP multicast table for PTP attributes that are specific to multicast. In TP5K 2.0, main shelf and expansion shelves all support multicast. SEQUENCE OF Ptpv2MulticastEntry .1.3.6.1.4.1.9070.1.2.5.1.1.2.3 |
ptpv2MulticastEntryAn entry to the PTP multicast configuration table. Table index is ifIndex. The multicast table has 6 multicast attributes. Ptpv2MulticastEntry .1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1 |
ptpv2MulticastIndexLocal index of the PTP multicast configuration table. Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.1 |
ptpv2MulticastAnnounceIntPTP multicast Announce message transmission interval (inverse of the maximum PTP multicast Announce message transmission rate). This is the exponent of 2, and the value range is -4 to +4. Default value is 1 (which means 2 seconds). If the value of the multicast Announce transmission interval is -4, the message transmission interval is = 2^(-4) = 0.0625 seconds, or the message transmission rate is 16 messages per second.rw INTEGER (-4..4) .1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.2 |
ptpv2MulticastSyncIntPTP multicast Sync message transmission interval (inverse of the maximum PTP multicast Sync message transmission rate). This is the exponent of 2, and the value range is -7 to +7. Default value is 0 (i.e. 1 second). If the value of the multicast Sync transmission interval is -4, the message transmission interval is = 2^(-4) = 0.0625 seconds, or the message transmission rate is 16 messages per second.rw INTEGER (-7..7) .1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.3 |
ptpv2MulticastDelayIntPTP multicast Delay_Req message transmission interval (inverse of the maximum PTP multicast Delay_Req message transmission rate). This is the exponent of 2, and the value range is -7 to +7.Default value is -7. If the value of the multicast Delay_Req transmission interval is -4, the message transmission interval is = 2^(-4) = 0.0625 seconds, or the message transmission rate is 16 messages per second.rw INTEGER (-7..7) .1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.4 |
ptpv2MulticastAnnoTimeoutMulticast Announce Receipt Timeout. Its range is 2 to 10 and its unit is number of intervals. Default value is 3 (intervals). It is the number of Announce intervals that has to pass without receiving an Announce message before the PTP port declares Announce_Receipt_Timeout_Expires. If the timeout value is 2 and the multicast announce interval is 4 seconds, then the multicast announce receipt timeout value is 2*4 = 8 seconds.rw INTEGER .1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.5 |
ptpv2MulticastVlanIdMulticast VLAN ID of the specified PTP port. Each multicast PTP port only supports one VLAN. Range is 0 to 4094. Default value is 0.rw INTEGER .1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.6 |
ptpv2MulticastClientTimeoutMulticast client timeout. Range is 10 to 3600 seconds. Default value is 300 seconds. TP5000 maintains a list of active PTP clients. If the grandmaster does not receive Delay_Req message from a client for more than this timeout value, the client is removed from the TP5000 client list.rw INTEGER .1.3.6.1.4.1.9070.1.2.5.1.1.2.3.1.7 |
ptpv2G82751TableThe PTP itu-g8276-1 configuration table for PTP attributes that are specific to itu-g8276-1. In TP5K 2.2, only the main shelf supports itu-g8276-1. SEQUENCE OF Ptpv2G82751Entry .1.3.6.1.4.1.9070.1.2.5.1.1.2.4 |
ptpv2G82751EntryAn entry to the PTP G82751 configuration table. Table index is ifIndex. The G82751 table has two attributes: multicast address and G82751 local priority. Ptpv2G82751Entry .1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1 |
ptpv2G82751IndexLocal index of the PTP G82751 configuration table. Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.1 |
ptpv2G82751MulticastAddrG82751 multicast address for the specified port. The valid setting should be mac011b19000000 (1) or mac0180c200000e (2)rw G82751McAddrValue .1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.2 |
ptpv2G82751LocalPriorityPTP G82751 local priority, the valid range is 1 to 255.rw Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.4.1.3 |
ptpv2ReflectorTablePTP Unicast Reflector Table SEQUENCE OF Ptpv2ReflectorEntry .1.3.6.1.4.1.9070.1.2.5.1.1.2.5 |
ptpv2ReflectorEntryAn entry to the PTP Reflector configuration table. Table index is ifIndex. Ptpv2ReflectorEntry .1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1 |
ptpv2ReflectorIndexLocal index of the PTP Reflector configuration table. Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.1 |
ptpv2ReflectorAnnounceIntvPTP unicast reflector announce interval. Valid range -3 to 0rw INTEGER (-3..0) .1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.2 |
ptpv2ReflectorSyncDelayIntvPTP unicast reflector sync-delay interval. Valid range -7 to -4rw INTEGER (-7..-4) .1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.3 |
ptpv2ReflectorClientTimeoutPTP unicast reflector Client timeout. Valid range 60 to 1000rw Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.4 |
ptpv2ReflectorVlanIDPTP unicast reflector Vlan-ID. Valid range 2 to 4096. Enter 0 for NONE, 1 denotes Invalidrw Integer32 .1.3.6.1.4.1.9070.1.2.5.1.1.2.5.1.5 |
ptpv2ConformanceThis subtree contains conformance statements for the SYMMCOMMONPTP MIB module. OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.1.3 |
ptpv2Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.1.3.1 |
ptpv2BasicComplianceThe compliance statement for SNMP entities which have PTP packet service. Unknown .1.3.6.1.4.1.9070.1.2.5.1.1.3.1.1 |
ptpv2UocGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.1.3.2 |
ptpv2StatusGroupA collection of objects providing information applicable to PTP status group. Unknown .1.3.6.1.4.1.9070.1.2.5.1.1.3.2.1 |
ptpv2ClientDataGroupA collection of objects providing information applicable to PTP client group. Unknown .1.3.6.1.4.1.9070.1.2.5.1.1.3.2.2 |
ptpv2CommonGroupA collection of objects providing information applicable to PTP common group. Unknown .1.3.6.1.4.1.9070.1.2.5.1.1.3.2.3 |
ptpv2UnicastGroupA collection of objects providing information applicable to PTP unicast group. Unknown .1.3.6.1.4.1.9070.1.2.5.1.1.3.2.4 |
ptpv2MulticastGroupA collection of objects providing information applicable to PTP multicast group. Unknown .1.3.6.1.4.1.9070.1.2.5.1.1.3.2.5 |
ptpv2G82751GroupA collection of objects providing information applicable to PTP G82751 group. Unknown .1.3.6.1.4.1.9070.1.2.5.1.1.3.2.6 |