SYMMNTP
This is the Symmetricom NTP MIB. It has two main nodes: NTP status and NTP configuration.
Main OID:
symmNTP.1.3.6.1.4.1.9070.1.2.5.1.2
28
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
symmNTPThis is the Symmetricom NTP MIB. It has two main nodes: NTP status and NTP configuration. MODULE-IDENTITY .1.3.6.1.4.1.9070.1.2.5.1.2 |
ntpStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.2.1 |
ntpCommonStatusTableThe NTP status table. It provides status for the NTP server operation. There are 7 status parameters. SEQUENCE OF NtpCommonStatusEntry .1.3.6.1.4.1.9070.1.2.5.1.2.1.1 |
ntpCommonStatusEntryAn entry of the NTP status table. Table index is ifIndex (port and interface index). NtpCommonStatusEntry .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1 |
ntpStatusIndexLocal index of the NTP common status table. Integer32 .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.1 |
ntpStatusEnableThe NTP enable status for the specified NTP port. It can be Enable (1) or Disable (2). When NTP is disabled at a port, it does not transmit or respond to NTP packets, and all alarms associated with NTP for this port are cleared.ro EnableValue .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.2 |
ntpStatusModeThe NTP operational mode. It can act as server or client. Currently only the server mode is supported.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.3 |
ntpStatusLeapStatusThe NTP leap second status. Possible values are : No warning, Leap insertion, Leap deletion, Not in sync.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.4 |
ntpStatusStratumLevelThe stratum level of the reference for the NTP clock at the specified port. Its range is 1-4. Only stratum level 1(PRC/PRS) is supported.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.5 |
ntpStatusRootDispersionRoot dispersion. Hardcoded to be 0.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.6 |
ntpStatusPacketLoadNTP packet response load. Its range is 1-100 in unit of %.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.7 |
ntpStatusVersionNTP protocol version. Only version 4 is supported.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.1.2.1.1.1.8 |
ntpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.2.2 |
ntpCommonConfigTableThe NTP server configuration table. SEQUENCE OF NtpCommonConfigEntry .1.3.6.1.4.1.9070.1.2.5.1.2.2.1 |
ntpCommonConfigEntryAn entry of the NTP server configuration table. Table index is ifIndex (port and interface index). NtpCommonConfigEntry .1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1 |
ntpCommonIndexLocal index of the NTP common parameter configuration table. Integer32 .1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.1 |
ntpCommonStateThe NTP service enable state for the specified port. It can be Enable (1) or Disable (2). Default value is Enable. When NTP is disabled at a port, it does not transmit or respond to NTP packets, and all alarms associated with NTP for this port are cleared.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.2 |
ntpCommonTTLIP header time-to-live (TTL) field for the NTP packets. Range is 1-255. Default value is 64.rw Unsigned32 .1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.3 |
ntpCommonDSCPDifferentiated service code point (DSCP) state for the specified NTP port. It can be either Enable (1) or Disable (2). Default value is Disable. If DSCP state is Enable, the QoS field will have a configured DSCP value.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.4 |
ntpCommonDSCPValueDSCP value for PTP packets leaving this port. Range is 0-63, and default value is 0.rw Unsigned32 .1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.5 |
ntpCommonVlanIdThe VLAN ID associated with the NTP service at this port. Each port only supports one NTP VLAN.rw INTEGER .1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.6 |
ntpCommonServiceLoadAlarmThresholdIt shows percentage (%) of NTP service load alarm thresholdrw Integer32 .1.3.6.1.4.1.9070.1.2.5.1.2.2.1.1.7 |
ntpConformanceThis subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.2.3 |
ntpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.2.3.1 |
ntpBasicComplianceThe compliance statement for SNMP entities which have NTP packet service. Unknown .1.3.6.1.4.1.9070.1.2.5.1.2.3.1.1 |
ntpUocGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.1.2.3.2 |
ntpStatusGroupA collection of objects providing information applicable to NTP status group. Unknown .1.3.6.1.4.1.9070.1.2.5.1.2.3.2.1 |
ntpConfigGroupA collection of objects providing information applicable to NTP configuration group. Unknown .1.3.6.1.4.1.9070.1.2.5.1.2.3.2.2 |