SYMMOUTGEN
Imported Objects
Objects
15 total| Object Name |
|---|
symmOutGenThis is the Symmetricom Common MIB for output generation. It specifies output port behavior (on | squelch | AIS) when the system clock state is not Normal Tracking. TP5K defines five clock states: warm-up, free-run, fast track, normal track, and holdover. MODULE-IDENTITY .1.3.6.1.4.1.9070.1.2.5.2.6 |
outGenStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.6.1 |
outGenConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.6.2 |
outGenConfigTableOutput generation configuration table. Each table entry specifies port behavior for each of the four clock states. Only ports with the following physical signals are affected by this output generation table: E1/T1, 1PPS+TOD, 1PPS, and 10 MHz. Ethernet port signals (PTP, NTP, SyncE) use quality level parameters to indicate usability. SEQUENCE OF OutGenConfigEntry .1.3.6.1.4.1.9070.1.2.5.2.6.2.1 |
outGenConfigEntryAn entry of the output generation configuration table. Table index is ifIndex. OutGenConfigEntry .1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1 |
outGenConfigIndexLocal index of the output generation configuration table. Integer32 .1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.1 |
outGenConfigWarmupOutput behavior during clock warm-up state for the specified port. Values can be on (1), squelch (2), or AIS (3).rw GENERALOUTGENTYPE .1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.2 |
outGenConfigFreerunOutput behavior during clock free-run state for the specified port. Values can be on (1), squelch (2), or AIS (3).rw GENERALOUTGENTYPE .1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.3 |
outGenConfigHoldoverOutput behavior during clock holdover state for the specified port. Values can be on (1), squelch (2), or AIS (3).rw GENERALOUTGENTYPE .1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.4 |
outGenConfigFasttrackOutput behavior during clock fast-track state for the specified port. Values can be on (1), squelch (2), or AIS (3).rw GENERALOUTGENTYPE .1.3.6.1.4.1.9070.1.2.5.2.6.2.1.1.5 |
outGenConformanceThis subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.6.3 |
outGenCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.6.3.1 |
outGenBasicComplianceThe compliance statement for SNMP entities which have output generation. Unknown .1.3.6.1.4.1.9070.1.2.5.2.6.3.1.1 |
outGenUocGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.6.3.2 |
outGenGroupA collection of objects providing information applicable to common output generation group. Unknown .1.3.6.1.4.1.9070.1.2.5.2.6.3.2.1 |
More MIBs from Symmetricom
Browse all SymmetricomMIBs →The TP5000 MIB module provides management and monitoring capabilities for the Symmetricom TimeProvider 5000 hardware, enabling the retrieval of precise time synchronization status, clock discipline parameters, and internal sensor telemetry such as temperature and voltage levels.
SNMP MIB module
SNMP MIB module
SNMP MIB module
The SYMM-SMI module defines the structure for Symmetricom (now Microchip) enterprise-specific parameters, primarily enabling the monitoring of time synchronization hardware such as atomic clocks, GPS receivers, and NTP servers. It facilitates the retrieval of critical operational metrics including frequency accuracy, holdover status, GPS lock state, and internal temperature readings for network time protocol infrastructure.
The SYMMGNSS MIB module enables monitoring and configuration of Symmetricom GNSS receivers by exposing real-time satellite acquisition status, current position modes, and operational parameters via the gnssStatus and gnssConfig nodes. It facilitates the retrieval of port states, satellite constellation data, and the adjustment of position settings to ensure precise time and frequency synchronization.