SYMMENTITYPHYSICALEXT
The SYMMENTITYPHYSICALEXT MIB extends the standard physical layer monitoring capabilities for Symmetricom (Microchip) network synchronization and timing hardware, specifically exposing vendor-specific interface attributes, environmental sensors, and hardware status indicators not covered by standard MIBs. This module enables granular visibility into the physical state of Stratum-level clock devices, including port status, temperature, voltage, and fan health, to support precise fault isolation and maintenance of high-availability timing infrastructure.
Imported Objects
Objects
17 total| Object Name |
|---|
symmEntityPhysicalExtSymmetricom common entity extension MIB MODULE-IDENTITY .1.3.6.1.4.1.9070.1.2.5.5.1 |
entPhysicalExtTablePhysical entity extension from public ENTITY-MIB (RFC2737). This extension contains additional information for the module entry in the ENTITY-MIB. SEQUENCE OF EntPhysicalExtEntry .1.3.6.1.4.1.9070.1.2.5.5.1.1 |
entPhysicalExtEntryAn entry of the physical entity extension table. Each entry is for a module entry in the ENTITY-MIB. EntPhysicalExtEntry .1.3.6.1.4.1.9070.1.2.5.5.1.1.1 |
entPhyInServiceA DateAndTime string containing information about in-service time for the module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.1 |
entPhyCLEINumThe current CLEI number is given, if one is assigned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.2 |
entPhyFPGAVersionThe current FPGA version is given.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.3 |
entPhySlotPosition of the module in a chassis.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.4 |
entPhyCompatiHWThe HW compatibility value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.5 |
entPhyCompatiSWThe SW compatibility value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.6 |
entPhyCompatiMtoMThe Module-to-Module compatibility value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.7 |
entPhyCountryOfOriginThe Country of Origin of modulero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.8 |
entPhyManufacturerIDThe Manufacturer ID of module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.5.1.1.1.9 |
entPhysicalExtConformanceThis subtree contains conformance statements for the symmEntityPhysicalExt MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.5.1.2 |
entPhysicalExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.5.1.2.1 |
entPhysicalExtBasicComplianceThe compliance statement for SNMP entities which have physical entity extension. Unknown .1.3.6.1.4.1.9070.1.2.5.5.1.2.1.1 |
entPhysicalExtUocGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.5.1.2.2 |
entPhysicalExtGroupA collection of objects providing information applicable to physical entity extension group. Unknown .1.3.6.1.4.1.9070.1.2.5.5.1.2.2.1 |
More MIBs from Symmetricom
Browse all SymmetricomMIBs →The TP5000 MIB module provides management and monitoring capabilities for the Symmetricom TimeProvider 5000 hardware, enabling the retrieval of precise time synchronization status, clock discipline parameters, and internal sensor telemetry such as temperature and voltage levels.
SNMP MIB module
SNMP MIB module
SNMP MIB module
The SYMM-SMI module defines the structure for Symmetricom (now Microchip) enterprise-specific parameters, primarily enabling the monitoring of time synchronization hardware such as atomic clocks, GPS receivers, and NTP servers. It facilitates the retrieval of critical operational metrics including frequency accuracy, holdover status, GPS lock state, and internal temperature readings for network time protocol infrastructure.
The SYMMGNSS MIB module enables monitoring and configuration of Symmetricom GNSS receivers by exposing real-time satellite acquisition status, current position modes, and operational parameters via the gnssStatus and gnssConfig nodes. It facilitates the retrieval of port states, satellite constellation data, and the adjustment of position settings to ensure precise time and frequency synchronization.