SYMMSYNCE
This is the Symmetricom Common MIB for SyncE. It has two main nodes: SyncE status and SyncE configuration.
Main OID:
symmSyncE.1.3.6.1.4.1.9070.1.2.5.2.8
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
symmSyncEThis is the Symmetricom Common MIB for SyncE. It has two main nodes: SyncE status and SyncE configuration. MODULE-IDENTITY .1.3.6.1.4.1.9070.1.2.5.2.8 |
syncEStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.8.1 |
syncEOutputStatusTableSyncE output status table. It monitors whether ESMC and QL are enabled or disabled. SyncE 'output' indicates that the port is intended as a SyncE clock master port. SEQUENCE OF SyncEOutputStatusEntry .1.3.6.1.4.1.9070.1.2.5.2.8.1.1 |
syncEOutputStatusEntryAn entry of the SyncE output status table. Table index is ifIndex (port and interface index). SyncEOutputStatusEntry .1.3.6.1.4.1.9070.1.2.5.2.8.1.1.1 |
syncEOutputStatusIndexLocal index of the SyncE output status table. Integer32 .1.3.6.1.4.1.9070.1.2.5.2.8.1.1.1.1 |
syncEOutputEsmcStatusSyncE output port ESMC state. It can be Enable (1) or Disable (2). If ESMC state is disabled, ESMC is not used.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.2.8.1.1.1.2 |
syncEOutputStatusRxQLReceived QL value. This is the SSM value in the incoming ESMC. Its value can be actual or 'n/a.' In the asynchronous mode the SSM value is 'n/a.'ro Integer32 .1.3.6.1.4.1.9070.1.2.5.2.8.1.1.1.3 |
syncEOutputStatusTxQLTransmitted QL value. This is the SSM value in the outgoing ESMC. Its value can be actual or 'n/a.' In the asynchronous mode the SSM value is 'n/a.'ro Integer32 .1.3.6.1.4.1.9070.1.2.5.2.8.1.1.1.4 |
syncEConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.8.2 |
syncEOutputConfigTableSyncE output port configuration table. SEQUENCE OF SyncEOutputConfigEntry .1.3.6.1.4.1.9070.1.2.5.2.8.2.1 |
syncEOutputConfigEntryAn entry of the SyncE output configuration table. Table index is IfIndex (port and interface index). SyncEOutputConfigEntry .1.3.6.1.4.1.9070.1.2.5.2.8.2.1.1 |
syncEOutputConfigIndexLocal index of the SyncE output configuration table. Integer32 .1.3.6.1.4.1.9070.1.2.5.2.8.2.1.1.1 |
syncEOutputEsmcStateSyncE output port ESMC state. It can be either Enable (1) or Disable (2). If ESMC is disabled, ESMC messages are not sent.rw EnableValue .1.3.6.1.4.1.9070.1.2.5.2.8.2.1.1.2 |
syncEOutputQLStateSyncE output port QL state. It can either Enable (1) or Disable (2).rw EnableValue .1.3.6.1.4.1.9070.1.2.5.2.8.2.1.1.3 |
syncEOutputQLModeSyncE output port output QL mode. It can be unidirectional or bidirectional. In the unidirectional mode, the outgoing QL value is independent of the incoming QL value. In the bidirectional mode, the outgoing QL value is changed to DNU if it is the same as the incoming QL value.rw SYNCEPQLMODE .1.3.6.1.4.1.9070.1.2.5.2.8.2.1.1.4 |
syncEConformanceThis subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.8.3 |
syncECompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.8.3.1 |
syncEBasicComplianceThe compliance statement for SNMP entities which have SyncE packet service. Unknown .1.3.6.1.4.1.9070.1.2.5.2.8.3.1.1 |
syncEUocGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.2.8.3.2 |
syncEOutputStatusGroupDescription. Unknown .1.3.6.1.4.1.9070.1.2.5.2.8.3.2.1 |
syncEConfigGroupA collection of objects providing information applicable to SyncE configuration group. Unknown .1.3.6.1.4.1.9070.1.2.5.2.8.3.2.2 |