SYMMDATEANDTIME
The SYMMDATEANDTIME MIB enables management of Symmetricom clocking hardware by exposing configuration parameters and operational status nodes for system date and time synchronization. This module facilitates the monitoring of time accuracy and the enforcement of time configuration policies essential for maintaining network-wide synchronization integrity.
Imported Objects
Objects
16 total| Object Name |
|---|
symmDateAndTimeThis is the Symmetricom Common MIB for clock date and time. It has a status node and a configuration node. MODULE-IDENTITY .1.3.6.1.4.1.9070.1.2.5.3.1 |
dateAndTimeStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.3.1.1 |
symmDateAndTimeTableDate and Time Status Table for the specified hardware module. SEQUENCE OF SymmDateAndTimeEntry .1.3.6.1.4.1.9070.1.2.5.3.1.1.1 |
symmDateAndTimeEntryAn entry of the date and time status table. Table index is entPhysicalIndex (hardware module index). For TP5K modules with date and time information are: IMC. SymmDateAndTimeEntry .1.3.6.1.4.1.9070.1.2.5.3.1.1.1.1 |
symmDateAndTimeInfoThe clock information for the specified module.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.3.1.1.1.1.1 |
symmCurrentDateTimeCurrent UTC date and time.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.3.1.1.2 |
symmLeapPendingAndSecondLeap pending information and leap second.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.3.1.1.3 |
dateAndTimeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.3.1.2 |
symmLeapSecondConfigThe accumulated leap seconds between TAI and UTC (in seconds). This is write-only.rw Unsigned32 UNITS "Second" .1.3.6.1.4.1.9070.1.2.5.3.1.2.1 |
symmDateTimeConfigThe date and time of IMC module. Format is YYYY-MM-DD,HH:MM:SS. Manually entered date and time will not be accepted when the system is GNSS mode.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.9070.1.2.5.3.1.2.2 |
dateAndTimeConformanceThis subtree contains conformance statements for the SYMMETRICOM-LED-MIB module. OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.3.1.3 |
dateAndTimeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.3.1.3.1 |
dateTimeBasicComplianceDescription. Unknown .1.3.6.1.4.1.9070.1.2.5.3.1.3.1.1 |
dateAndTimeUocGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9070.1.2.5.3.1.3.2 |
dateTimeStatusGroupDescription. Unknown .1.3.6.1.4.1.9070.1.2.5.3.1.3.2.1 |
dateTimeConfigGroupDescription. Unknown .1.3.6.1.4.1.9070.1.2.5.3.1.3.2.2 |
More MIBs from Symmetricom
Browse all SymmetricomMIBs →The TP5000 MIB module provides management and monitoring capabilities for the Symmetricom TimeProvider 5000 hardware, enabling the retrieval of precise time synchronization status, clock discipline parameters, and internal sensor telemetry such as temperature and voltage levels.
SNMP MIB module
SNMP MIB module
SNMP MIB module
The SYMM-SMI module defines the structure for Symmetricom (now Microchip) enterprise-specific parameters, primarily enabling the monitoring of time synchronization hardware such as atomic clocks, GPS receivers, and NTP servers. It facilitates the retrieval of critical operational metrics including frequency accuracy, holdover status, GPS lock state, and internal temperature readings for network time protocol infrastructure.
The SYMMGNSS MIB module enables monitoring and configuration of Symmetricom GNSS receivers by exposing real-time satellite acquisition status, current position modes, and operational parameters via the gnssStatus and gnssConfig nodes. It facilitates the retrieval of port states, satellite constellation data, and the adjustment of position settings to ensure precise time and frequency synchronization.