RC-TRAP-MIB
AI MIB Summary
The RC-TRAP-MIB module defines SNMP trap notifications for the Accelar product family, specifically alerting management systems to critical hardware events, session state transitions, and link status changes within the network acceleration infrastructure.
Enterprise MIB for the Accelar product family.
Main OID:
rcTrapsMib.1.3.6.1.4.1.2272.1.21.0
142
Objects
Active
Status
20
Dependencies
Imported Objects
Objects
142 total| Object Name |
|---|
rcTrapsMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.21.0 |
rcnCardDownA rcCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.1 |
rcnCardUpA rcCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.2 |
rcnErrorNotificationA rcErrorNotification trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that an error condition has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.3 |
rcnStpNewRootA rcStpNewRoot trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has declared
the device to be the new root of the spanning
tree. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.4 |
rcnStpTopologyChangeA rcStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.5 |
rcnChasPowerSupplyDownA rcChasPowerSupplyDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.6 |
rcnChasFanDownA rcChasFanDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.7 |
rcnLinkOscillationA rcLinkOscillation trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected an excessive number of link state
transitions on the specified port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.8 |
rcnMacViolationA rcMacViolation trap signifies that the
SNMPv2 entity, acting in an agent role, has
received a PDU with an invalid source MAC
address. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.9 |
rcnSonetTrapA rcSonetTrap trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected a change of status on a Sonet port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.10 |
rcn2kCardDownA rcCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.11 |
rcn2kCardUpA rcCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.12 |
rcn2kTemperatureA rc2kTemperature trap signifies that the SNMPv2
entity, acting in an agent role, has detected the
chassis is over-heating. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.13 |
rcnChasPowerSupplyUpA rcChasPowerSupplyUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.14 |
rcn2kAtmPvcLinkStateChangeA rc2kAtmPvcLinkStateChange trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that the rc2kAtmPvcOamVcStatus object for one of PVC is
about to transition into different state, either from
up to down or from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.15 |
rcnStpTCNA rcStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.16 |
rcnSmltIstLinkUpA rcSmltIstLinkUp trap signifies that the split
MLT link is from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.17 |
rcnSmltIstLinkDownA rcSmltIstLinkDown trap signifies that the
split MLT link is from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.18 |
rcnSmltLinkUpA rcMltSmltId trap signifies that the split
SMLT link is up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.19 |
rcnSmltLinkDownA rcMltSmltId trap signifies that the split
SMLT link is down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.20 |
rcnChasFanUpA rcChasFanUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.21 |
rcnPasswordChangeA rcPasswordChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the one of the cli password is
changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.22 |
rcnEmErrorA rcEmError trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected Em error. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.23 |
rcnVpnTrapL2Vpn will send trap when the Lsp goes down, which
would affect the operational status of the Vpn (given
by the VpnId). The Cause will indicate the reason for
sending the trap. It can either LSP down/failure or
to the bandwidth requirements cannot be fulfilled.
Severity Level can be Warning/Error/Fatal. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.24 |
rcnPcmciaCardRemovedA rcPcmciaRemoved trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the PCMCIA card is being removed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.25 |
rcnSmartCpldTimerFiredA rcSmartCpldTimerFired trap signifies that the
cpld timer fired. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.26 |
rcnCardCpldNotUpDateA rcCardCpldNotUpDate trap signifies that the
cpld is not up to date. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.27 |
rcnIgapLogFileFullA rcIgapLogFileFull trap signifies that the
Igap accounting time-out Log File reach the
maximum. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.28 |
rcnCpLimitShutDownA rcCpLimitShutDown trap signifies that the
cp limit for the port is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.29 |
rcnSshServerEnabledA rcSshServerEnabled trap signifies that the
SSH server is enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.30 |
rcnSshServerDisabledA rcSshServerDisabled trap signifies that the
SSH server is disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.31 |
rcnSshSessionLoginA rcSshSessionLogin trap signifies that there
is a SSH session login. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.32 |
rcnSshSessionLogoutA rcSshSessionLogout trap signifies that there
is a SSH session logout. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.33 |
rcnSshUnauthorizedAccessA rcSshUnauthorizedAccess trap signifies that
an unauthorized access has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.34 |
rcnHaCpuStateA rcHaCpuState trap signifies that the
state of the HA-CPU. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.35 |
rcnInsufficientMemoryA rcInsufficientMemory trap indicates insufficient memory on
CPU blade for proper operation. Recommended memory = 256 MB
available through Nortel Networks upgrade kit NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.36 |
rcnSaveConfigActionA rcSaveConfigAction trap indicates the switch run
time or boot configuration is being saved NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.37 |
rcnLoopDetectOnPortA rcnLoopDetectOnPort trap indicates that a loop has
been detected on a port. The vlan on that port will
be disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.38 |
rcnbgpEstablishedThe BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.39 |
rcnbgpBackwardTransitionThe BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.40 |
rcnAggLinkUpA rcAggLinkUp trap is generated when the operational
state of the aggregator changes from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.41 |
rcnAggLinkDownA rcAggLinkDown trap is generated when the operational
state of the aggregator changes from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.42 |
rcnIgmpNewGroupMemberAn IgmpNewGroupMember trap signifies that a
new member has come on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.43 |
rcnIgmpLossGroupMemberAn IgmpLossGroupMember trap signifies that a
group member has been lost on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.44 |
rcnIgmpNewQuerierAn igmpNewQuerier trap signifies that a new
querier has come up on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.45 |
rcnIgmpQuerierChangeAn rcIgmpQuerierChange trap signifies that
the querier has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.46 |
rcnDvmrpIfStateChangeA rcDvmrpIfStateChange trap signifies that there
has been a change in the state of a DVMRP
interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.47 |
rcnDvmrpNewNbrChangeA rcDvmrpNewNbrChange trap signifies that a new
neighbor has come up on a DVMRP interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.48 |
rcnDvmrpNbrLossChangeA rcDvmrpNbrLossChange trap signifies that a new
neighbor has gone down on a DVMRP interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.49 |
rcnPsePortOnOffA rcPsePortOnOff trap signifies that if
Pse Port is delivering or not power to the
This Notification SHOULD be sent on every
status change except in the searching mode. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.50 |
rcnPsePortPowerMaintenanceStatusA rcPsePortPowerMaintenanceStatus trap
signifies that a Port change Status and
it SHOULD be sent on every status change. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.51 |
rcnMainPseBackupActivateA rcMainPseBackupActivate trap signifies that
a Backup is Activated or BackUp is released
on a Pse Port Group. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.52 |
rcnMainPowerUsageOnA rcMainPowerUsageOn trap signifies that
PSE Threshold Usage indication of a PSE
Port Group is on, the usage power is above
the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.53 |
rcnMainPowerUsageOffA rcMainPowerUsageOn trap signifies that
PSE Threshold Usage indication of a PSE
Port Group is off, the usage power is above
the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.54 |
rcnPseCardOnOffA rcPoeMainPwrFailure trap signifies that the
main power admin status is up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.55 |
rcnTlsWatermarkTrapA Watermark trap signifies that the Mac Table for the
endpoint has reached its high watermark or is already
full. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.56 |
rcnTdcTestResultTrapA Tdc test fail trap indicates that the tdc test
test identified by test ID failed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.57 |
rcnTdcTestRttExceedTrapA Tdc Rtt Exceed trap indicates that the round trip
time of the tdc test identified by test ID exceeded
the configured threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.58 |
rcnFdbProtectViolationThe rcFdbProtectViolation trap signifies that the
port has violated the user configured limit for
total number of fdb-entries learned on that port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.59 |
rcnLogMsgControlA rcMsgControl trap signifies whether the number of times of
repeatation of the particular Log message has exceeded
the particular frequency/count or not. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.60 |
rcnSaveConfigFileA rcSaveConfig trap signifies that either the
runtime config or the boot config has been saved
on the switch NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.61 |
rcnDNSRequestResponseA rcDnsRequestResponse trap signifies that the
switch had sent a query to the DNS server or it had
received a successful response from the DNS Server NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.62 |
rcnDuplicateIpAddressA rcDuplicateIpAddressTrap signifies that a duplicate IP
address is detected on the subnet NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.63 |
rcnLoopDetectPortDownA rcLoopDetectPortDown trap signifies that a loop has
been detected on a port and the port is going to shut down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.64 |
rcnUnauthorizedAccessToStandByCPUA rcnUnauthorizedAccessToStandByCPU trap
signifies that the user attempt to access
standby CPU. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.65 |
rcnTlsPortWatermarkTrapA Watermark trap signifies that the
Mac Table for the port has reached its high watermark or already full NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.66 |
rcnLoopDetectMacDiscardA rcLoopDetectMacDiscard trap signifies that a loop
has been Detected on a port and the mac address will
be discarded on all ports in that vlan NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.67 |
rcnAutoRecoverPortA rcnAutoRecoverPort trap signifies that autorecover
has re-enabled a port disabled by link flap or cp limit NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.68 |
rcnAutoRecoverLoopDetectedPortA rcnAutoRecoverPort trap signifies that autorecover
has cleared the action taken on a port by loop detect NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.69 |
rcnExtCpLimitShutDownA rcnExtCpLimitShutDown trap signifies that
port is shut down due to Extended CP-Limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.70 |
rcnExtCpLimitSopCongestionA rcnExtCpLimitSopCongestion signifies that system octapid
polling finds that system octapid is congested or not.
rcSysExtCplimitSysOctapidCongested signifies whether
system octapid is congested or not.
rcSysExtCplimitPortsMonitored signifies whether ports are
selected for monitoring the ingress traffic utilization. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.71 |
rcnNonEapIntrusionA rcNonEapIntrusion trap signifies that the
an intrusion has occurred in the port. This occurs when
the number of non-eap clients exceed the maximum allowed
non-eap clients on the port NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.72 |
rcnTlsUniIpServiceWatermarkTrapA Watermark trap signifies that the Ip Table for the Uni Ip Service (Cust Ip)
has reached its high watermark or already full NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.73 |
rcnTacacsAuthFailureTACACS+ authentication failed for user NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.74 |
rcnTacacsNoServersUnable to use any TACACS+ servers for authentication NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.75 |
rcnTacacsRxUnsupportedFrameReceived unsupported frame from TACACS+ server NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.76 |
rcnTacacsExceededMaxLoginsAttempted to exceed the maximum number of allowed TACACS+ logins NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.77 |
rcnTacacsClientFailureTACACS+ Client application is down NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.78 |
rcnBpduReceivedThis notification will be generated when a BPDU is
received on a port which has BPDU filtering enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.79 |
rcnVlacpPortDownA rcnVlacpPortDown trap signifies that
Vlacp is down on the port specified. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.80 |
rcnVlacpPortUpA rcnVlacpPortUp trap signifies that
Vlacp is Up on the port specified. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.81 |
rcnExtCpLimitShutDownNormalAn rcnExtCpLimitShutDownNormal trap signifies that
Ports are shut down due to Extended CP-Limit in Normal mode. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.82 |
rcnEapMacIntrusionA rcnEapMacIntrusion trap signifies that
an EAP MAC intrusion had occurred on this port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.0.83 |
rcCardDownA rcCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.1 |
rcCardUpA rcCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.2 |
rcErrorNotificationA rcErrorNotification trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that an error condition has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.3 |
rcStpNewRootA rcStpNewRoot trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has declared
the device to be the new root of the spanning
tree. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.4 |
rcStpTopologyChangeA rcStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.5 |
rcChasPowerSupplyDownA rcChasPowerSupplyDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.6 |
rcChasFanDownA rcChasFanDown trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.7 |
rcLinkOscillationA rcLinkOscillation trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected an excessive number of link state
transitions on the specified port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.8 |
rcMacViolationA rcMacViolation trap signifies that the
SNMPv2 entity, acting in an agent role, has
received a PDU with an invalid source MAC
address. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.9 |
rcSonetTrapA rcSonetTrap trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected a change of status on a Sonet port. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.10 |
rc2kCardDownA rcCardDown trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the down state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.11 |
rc2kCardUpA rcCardUp trap signifies that the SNMPv2 entity,
acting in an agent role, has detected that the
rcCardOperStatus object for one of its cards
is about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.12 |
rc2kTemperatureA rc2kTemperature trap signifies that the SNMPv2
entity, acting in an agent role, has detected the
chassis is over-heating. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.13 |
rcChasPowerSupplyUpA rcChasPowerSupplyUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasPowerSupplyOperStatus
object for one of its power supply unit is
about to transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.14 |
rc2kAtmPvcLinkStateChangeA rc2kAtmPvcLinkStateChange trap signifies that the
SNMPv2 entity, acting in an agent role, has detected
that the rc2kAtmPvcOamVcStatus object for one of PVC is
about to transition into different state, either from
up to down or from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.15 |
rcStpTCNA rcStpTopologyChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected the Spanning Tree Protocol has gone due
a topology change event. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.16 |
rcSmltIstLinkUpA rcSmltIstLinkUp trap signifies that the split
MLT link is from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.17 |
rcSmltIstLinkDownA rcSmltIstLinkDown trap signifies that the
split MLT link is from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.18 |
rcSmltLinkUpA rcMltSmltId trap signifies that the split
SMLT link is up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.19 |
rcSmltLinkDownA rcMltSmltId trap signifies that the split
SMLT link is down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.20 |
rcChasFanUpA rcChasFanUp trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the rcChasFanOperStatus object
for one of its power supply unit is about to
transition into the up state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.21 |
rcPasswordChangeA rcPasswordChange trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the one of the cli password is
changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.22 |
rcEmErrorA rcEmError trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected Em error. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.23 |
rcVpnTrapL2Vpn will send trap when the Lsp goes down, which
would affect the operational status of the Vpn (given
by the VpnId). The Cause will indicate the reason for
sending the trap. It can either LSP down/failure or
to the bandwidth requirements cannot be fulfilled.
Severity Level can be Warning/Error/Fatal. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.24 |
rcPcmciaCardRemovedA rcPcmciaRemoved trap signifies that the
SNMPv2 entity, acting in an agent role, has
detected that the PCMCIA card is being removed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.25 |
rcSmartCpldTimerFiredA rcSmartCpldTimerFired trap signifies that the
cpld timer fired. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.26 |
rcCardCpldNotUpDateA rcCardCpldNotUpDate trap signifies that the
cpld is not up to date. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.27 |
rcIgapLogFileFullA rcIgapLogFileFull trap signifies that the
Igap accounting time-out Log File reach the
maximum. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.28 |
rcCpLimitShutDownA rcCpLimitShutDown trap signifies that the
cp limit for the port is shutting down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.29 |
rcSshServerEnabledA rcSshServerEnabled trap signifies that the
SSH server is enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.30 |
rcSshServerDisabledA rcSshServerDisabled trap signifies that the
SSH server is disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.31 |
rcSshSessionLoginA rcSshSessionLogin trap signifies that there
is a SSH session login. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.32 |
rcSshSessionLogoutA rcSshSessionLogout trap signifies that there
is a SSH session logout. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.33 |
rcSshUnauthorizedAccessA rcSshUnauthorizedAccess trap signifies that
an unauthorized access has occured. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.34 |
rcHaCpuStateA rcHaCpuState trap signifies that the
state of the HA-CPU. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.35 |
rcInsufficientMemoryA rcInsufficientMemory trap indicates insufficient memory on
CPU blade for proper operation. Recommended memory = 256 MB
available through Nortel Networks upgrade kit NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.36 |
rcSaveConfigActionA rcSaveConfigAction trap indicates the switch run
time or boot configuration is being saved NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.37 |
rcLoopDetectOnPortA rcSaveConfigAction trap indicates that a loop has
been detected on a port. The vlan on that port will
be disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.38 |
cbgpEstablishedThe BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.39 |
rcbgpBackwardTransitionThe BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.40 |
rcAggLinkUpA rcAggLinkUp trap is generated when the operational
state of the aggregator changes from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.41 |
rcAggLinkDownA rcAggLinkDown trap is generated when the operational
state of the aggregator changes from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.42 |
rcIgmpNewGroupMemberAn IgmpNewGroupMember trap signifies that a
new member has come on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.43 |
rcIgmpLossGroupMemberAn IgmpLossGroupMember trap signifies that a
group member has been lost on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.44 |
rcIgmpNewQuerierAn igmpNewQuerier trap signifies that a new
querier has come up on an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.45 |
rcIgmpQuerierChangeAn rcIgmpQuerierChange trap signifies that
the querier has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.46 |
rcDvmrpIfStateChangeA rcDvmrpIfStateChange trap signifies that there
has been a change in the state of a DVMRP
interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.47 |
rcDvmrpNewNbrChangeA rcDvmrpNewNbrChange trap signifies that a new
neighbor has come up on a DVMRP interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.48 |
rcDvmrpNbrLossChangeA rcDvmrpNbrLossChange trap signifies that a new
neighbor has gone down on a DVMRP interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.49 |
rcPsePortOnOffA rcPsePortOnOff trap signifies that if Pse Port is delivering or not power to the
This Notification SHOULD be sent on every status change except in the searching mode. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.50 |
rcPsePortPowerMaintenanceStatusA rcPsePortPowerMaintenanceStatus trap signifies that a Port change Status
and it SHOULD be sent on every status change. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.51 |
rcMainPseBackupActivateA rcMainPseBackupActivate trap signifies that
a Backup is Activated or BackUp is released on a Pse Port Group. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.52 |
rcMainPowerUsageOnA rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication
of a PSE Port Group is on, the usage power is above the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.53 |
rcMainPowerUsageOffA rcMainPowerUsageOn trap signifies that PSE Threshold Usage indication
of a PSE Port Group is off, the usage power is above the threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.54 |
rcPseCardOnOffA rcPoeMainPwrFailure trap signifies that the main power admin status is up. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.55 |
rcTlsWatermarkTrapA Watermark trap signifies that the Mac Table for the
endpoint has reached its high watermark or is already full. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.56 |
rcTdcTestResultTrapA Tdc test fail trap indicates that the tdc test test identified by test ID failed. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.57 |
rcTdcTestRttExceedTrapA Tdc Rtt Exceed trap indicates that the round trip
time of the tdc test identified by test ID exceeded the configured threshold value. NOTIFICATION-TYPE .1.3.6.1.4.1.2272.1.21.58 |