RC-MLT-MIB
AI MIB Summary
The RC-MLT-MIB provides SNMP management capabilities for the Accelar product family, specifically enabling the monitoring of Multi-Chassis Link Aggregation (MLT) group states, member port status, and traffic statistics across distributed switch clusters.
Enterprise MIB for the Accelar product family.
Main OID:
rcMltMib.1.3.6.1.4.1.2272.1.17.0
182
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
182 total| Object Name |
|---|
rcStatMlt OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.12.6 |
rcStatMltIfExtnTableA table used to store Mlt interface
statistics. SEQUENCE OF RcStatMltIfExtnEntry .1.3.6.1.4.1.2272.1.12.6.1 |
rcStatMltIfExtnEntryMlt interface statistics RcStatMltIfExtnEntry .1.3.6.1.4.1.2272.1.12.6.1.1 |
rcStatMltIfExtnMltIdMlt Idro Integer32 .1.3.6.1.4.1.2272.1.12.6.1.1.1 |
rcStatMltIfExtnIfInMulticastPktsmulti-pkts to upperro Counter32 .1.3.6.1.4.1.2272.1.12.6.1.1.2 |
rcStatMltIfExtnIfInBroadcastPktsbroad-pkts to upperro Counter32 .1.3.6.1.4.1.2272.1.12.6.1.1.3 |
rcStatMltIfExtnIfOutMulticastPktsmulti-pkts from upperro Counter32 .1.3.6.1.4.1.2272.1.12.6.1.1.4 |
rcStatMltIfExtnIfOutBroadcastPktsbroad-pkts from upperro Counter32 .1.3.6.1.4.1.2272.1.12.6.1.1.5 |
rcStatMltIfExtnIfHCInOctetsThe total number of octets received
on the MLT interface, including framing
characters.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.6 |
rcStatMltIfExtnIfHCInUcastPktsThe number of packets delivered by this
MLT to a higher MLT that were not addressed
to a nulticast or broadcase address at this
sublayer.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.7 |
rcStatMltIfExtnIfHCInMulticastPktThe number of packets delivered to this MLT that
were addressed to a nulticast address at this
sublayer. For a MAC layer protocol, this number
includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.8 |
rcStatMltIfExtnIfHCInBroadcastPktThe number of packets delivered to this MLT that
were addressed to a broadcast address at this
sublayer.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.9 |
rcStatMltIfExtnIfHCOutOctetsThe total number of octets transmitted
out of the MLT interface, including
framing characters.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.10 |
rcStatMltIfExtnIfHCOutUcastPktsThe number of packets that hight-level protocols
requested be transmitted that were not addressed
to a multicast address at this MLT. This total
number includes those packets discarded or unsent.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.11 |
rcStatMltIfExtnIfHCOutMulticastThe total number of packets that hight-level
protocols requested be transmitted, and that
were addressed to a multicast address at this
MLT, including those that were discarded or
not sent. For a MAC layer protocol, this
number includes both Group and Functional
addresses.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.12 |
rcStatMltIfExtnIfHCOutBroadcastThe total number of packets that hight-level
protocols requested be transmitted, and that
were addressed to a broadcase address at this
MLT, including those that were discarded or
not sent.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.1.1.13 |
rcStatMltEtherTableA table used to store Mlt Ethernet
statistics. SEQUENCE OF RcStatMltEtherEntry .1.3.6.1.4.1.2272.1.12.6.2 |
rcStatMltEtherEntryMlt enternet statistics RcStatMltEtherEntry .1.3.6.1.4.1.2272.1.12.6.2.1 |
rcStatMltEtherMltIdA value that uniquely identifies the Multi-Link
Trunk associated with this entry.ro Integer32 .1.3.6.1.4.1.2272.1.12.6.2.1.1 |
rcStatMltEtherAlignmentErrorsA count of frames received on a particular MLT
that are not an integral number of octets in
length and do not pass the FCS check. The count
represented by an instance of this object is
incremented when the alignmentError status is
returned by the MAC service to the LLC (or other
MAC user). Received frames for which multiple
error conditions occur are, according to the
conventions of IEEE 802.3 Layer Management,
counted exclusively according to the error status
presented to the LLC.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.2 |
rcStatMltEtherFCSErrorsA count of frames received on an MLT that are an
integral number of octets in length but do not pass
the FCS check. The count represented by an instance
of this object is incremented when the frameCheckError
status is returned by the MAC service to the LLC
(or other MAC user). Received frames for which
multiple error conditions occur are, according to
the conventions of IEEE 802.3 Layer Management,
counted exclusively according to the error status
presented to the LLC.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.3 |
rcStatMltEtherSingleCollFramesA count of successfully transmitted frames on
a particular MLT for which transmission is
inhibited by exactly one collision. A frame
that is counted by an instance of this objects
is also counted by the corresponding instance
of either the ifOutUcastPkts, ifOutMulticastPkts,
or ifOutBroadcastPkts, and it not counted by the
corresponding instance of the MultipleCollisionFrames
object.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.4 |
rcStatMltEtherMultipleCollFramesA count of successfully transmitted frames on
a particular MLT for which transmission is
inhibited by more than one collision. A frame
that is counted by an instance of this object
is also counted by the corresponding instance
of either the ifOutUcastPkts, ifOutMulticastPkts,
or ifOutBroadcastPkts, and is not counted by the
corresponding instance of the SingleCollisionFrames
objects.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.5 |
rcStatMltEtherSQETestErrorA count of times that the SQE TEST ERROR message
is generated by the PLS sublayer for a particular
MLT. SQE stands for Signal Quality Error.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.6 |
rcStatMltEtherDeferredTransmissA count of frames for which the first transmission
attempt on a particular MLT is delayed because the
medium is busy. The count represented by an
instance of this object does not include frames
involved in collisions.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.7 |
rcStatMltEtherLateCollisionsThe number of times that a collision is detected
on a particular MLT later than 512 bit-times
(64 octets) into the transmission of a packet.
Five hundred and twelve bit-times corresponds to
51.2 microseconds on a 10 mb/s system. A (late)
collision included in a count represented by an
instance of this object is also considered as a
(generic) collision for purposes of other
collision-related statistics.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.8 |
rcStatMltEtherExcessiveCollisA count of frames for which transmission on a
particular MLT fails due to excessive collisions.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.9 |
rcStatMltEtherIMacTransmitErrorA count of frames for which transmission on a
particular MLT fails due to an internal MAC
sublayer transmit error. A frame is only counted
by an instance of this object if it is not counted
by the corresponding instance of either the
LateCollisions object, the ExcessiveCollisions
object, or the CarrierSenseError object.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.10 |
rcStatMltEtherCarrierSenseErrorThe number of times that the carrier sense
condition was lost or never asserted when
attempting to transmit a frame on a particular
MLT. The count represented by an instance of
this object is incremented at most once per
transmission attempt, even if the carrier
sense condition fluctuates during a
transmission attempt.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.11 |
rcStatMltEtherFrameTooLongA count of frames received on a particular MLT
that exceed the maximum permitted size (1518
octets). The count represented by an instance
os this object is incremented when the frame
TooLong status is returned by the MAC service
to the LLC (or other MAC user). Received frames
for which multiple error conditions occur are,
according to the conventions of IEEE 802.3
Layer Management, counted exclusively according
to the error status presented to the LLC.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.12 |
rcStatMltEtherIMacReceiveErrorA count of frames for which reception on a
particular MLT fails due to an internal MAC
sublayer receive error. A frame is only
counted by an instance of this object if it
is not counted by the corresponding instance
of either the FrameTooLongs object, the
AlignmentErrors object, of the FCSErrors
objects.
The precise meaning of the count represented
by an instance of this object is implementation
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not otherwise
counted.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.2.1.13 |
rcStatMltIpTableA table used to store Mlt Ip statistics.deprecated SEQUENCE OF RcStatMltIpEntry .1.3.6.1.4.1.2272.1.12.6.3 |
rcStatMltIpEntryMlt enternet statisticsdeprecated RcStatMltIpEntry .1.3.6.1.4.1.2272.1.12.6.3.1 |
rcStatMltIpMltIdMlt Idrodeprecated Integer32 .1.3.6.1.4.1.2272.1.12.6.3.1.1 |
rcStatMltIpInReceivesall incoming packetsrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.2 |
rcStatMltIpInHdrErrorshdr errors detectedrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.3 |
rcStatMltIpInAddrErrorsbad dest. ip addrrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.4 |
rcStatMltIpForwDatagramspackets forwardedrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.5 |
rcStatMltIpInUnknownProtosunsupported protocolrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.6 |
rcStatMltIpInDiscardsgood, but no bufferrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.7 |
rcStatMltIpInDeliverspkts delivered to upperrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.8 |
rcStatMltIpOutRequestpkts received from upperrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.9 |
rcStatMltIpOutDiscardsgood, but no bufferrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.10 |
rcStatMltIpOutNoRoutesno route to destinationrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.11 |
rcStatMltIpReasmReqdsfragments to reassemrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.12 |
rcStatMltIpReasmOKsreassembled successfullyrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.13 |
rcStatMltIpReasmFailsreassembly failuresrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.14 |
rcStatMltIpFragOKsfragment successfullyrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.15 |
rcStatMltIpFragFailsfragment failurerodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.16 |
rcStatMltIpFragCreatespkts due to fragmentingrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.17 |
rcStatMltIpRoutingDiscardsRoute entries removedrodeprecated Counter32 .1.3.6.1.4.1.2272.1.12.6.3.1.18 |
rcStatSmltIstDownCntCounters that counts how the session between the
two peering switches has done down since last boot.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.4 |
rcStatSmltHelloTxMsgCntCounters that counts the tx hello msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.5 |
rcStatSmltHelloRxMsgCntCounters that counts the rx hello msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.6 |
rcStatSmltLearnMacAddrTxMsgCntCounters that counts the tx learn Mac Address msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.7 |
rcStatSmltLearnMacAddrRxMsgCntCounters that counts the rx learn Mac Address msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.8 |
rcStatSmltMacAddrAgeOutTxMsgCntCounters that counts the tx Mac Address Aging Out msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.9 |
rcStatSmltMacAddrAgeOutRxMsgCntCounters that counts the rx Mac Address Aging Out msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.10 |
rcStatSmltMacAddrAgeExpTxMsgCntCounters that counts the tx Mac Address age expired msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.11 |
rcStatSmltMacAddrAgeExpRxMsgCntCounters that counts the rx Mac Address age expired msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.12 |
rcStatSmltStgInfoTxMsgCntCounters that counts the tx Stg information msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.13 |
rcStatSmltStgInfoRxMsgCntCounters that counts the rx Stg information msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.14 |
rcStatSmltDelMacAddrTxMsgCntCounters that counts the tx deleted MAC address msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.15 |
rcStatSmltDelMacAddrRxMsgCntCounters that counts the rx deleted MAC address msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.16 |
rcStatSmltSmltDownTxMsgCntCounters that counts the tx Smlt Down msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.17 |
rcStatSmltSmltDownRxMsgCntCounters that counts the rx Smlt Down msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.18 |
rcStatSmltSmltUpTxMsgCntCounters that counts the tx Smlt Up msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.19 |
rcStatSmltSmltUpRxMsgCntCounters that counts the rx Smlt Up msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.20 |
rcStatSmltSendMacTblTxMsgCntCounters that counts the tx Send Mac Table msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.21 |
rcStatSmltSendMacTblRxMsgCntCounters that counts the rx Send Mac Table msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.22 |
rcStatSmltIgmpTxMsgCntCounters that counts the tx Igmp msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.23 |
rcStatSmltIgmpRxMsgCntCounters that counts the rx Igmp msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.24 |
rcStatSmltPortDownTxMsgCntCounters that counts the tx port down msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.25 |
rcStatSmltPortDownRxMsgCntCounters that counts the rx port down msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.26 |
rcStatSmltReqMacTblTxMsgCntCounters that counts the tx request Mac table msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.27 |
rcStatSmltReqMacTblRxMsgCntCounters that counts the rx request Mac table msg.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.28 |
rcStatSmltRxUnknownMsgTypeCntCounters that counts the rx unknown msg type.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.29 |
rcStatMltIfUtilTableA table used to store Mlt interface utilization. SEQUENCE OF RcStatMltIfUtilEntry .1.3.6.1.4.1.2272.1.12.6.30 |
rcStatMltIfUtilEntryMlt interface utilization RcStatMltIfUtilEntry .1.3.6.1.4.1.2272.1.12.6.30.1 |
rcStatMltIfUtilMltIdTo assign an Id within the range specified to the
Mlt created Integer32 .1.3.6.1.4.1.2272.1.12.6.30.1.1 |
rcStatMltIfUtilIfHCInOctetsThe total number of octets received
on the MLT interface, including framing characters.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.30.1.2 |
rcStatMltIfUtilIfHCInUtilThe best estimate of the mean physical layer network
utilization on this interface during this interval,
in percent.ro Gauge32 .1.3.6.1.4.1.2272.1.12.6.30.1.3 |
rcStatMltIfUtilIfHCOutOctetsThe total number of octets transmitted out of the
MLT interface, including framing characters.ro Counter64 .1.3.6.1.4.1.2272.1.12.6.30.1.4 |
rcStatMltIfUtilIfHCOutUtilThe best estimate of the mean physical layer network
utilization on this interface during this interval,
in percent.ro Gauge32 .1.3.6.1.4.1.2272.1.12.6.30.1.5 |
rcStatSmltLacpInfoRxMsgCntLACP info msgs received.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.31 |
rcStatSmltLacpInfoTxMsgCntLACP info msgs transmitted.ro Counter32 .1.3.6.1.4.1.2272.1.12.6.32 |
rcStatMltUtilTableA table used to store statistics for MLT members utilization. SEQUENCE OF RcStatMltUtilEntry .1.3.6.1.4.1.2272.1.12.6.33 |
rcStatMltUtilEntryAn entry for MLT members utilization statistics table. RcStatMltUtilEntry .1.3.6.1.4.1.2272.1.12.6.33.1 |
rcStatMltUtilPortIfIndexPort ifIndex, member of rcMltId. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.12.6.33.1.1 |
rcStatMltUtilTrafficTypeType of traffic for one MLT port interface. Enumeration .1.3.6.1.4.1.2272.1.12.6.33.1.2 |
rcStatMltUtilTrafficLast5MinThis object returns the percentage of traffic on one MLT port interface for the last 5 minutes.ro Gauge32 .1.3.6.1.4.1.2272.1.12.6.33.1.3 |
rcStatMltUtilTrafficLast30MinThis object returns the percentage of traffic on one MLT port interface for the last 30 minutes.ro Gauge32 .1.3.6.1.4.1.2272.1.12.6.33.1.4 |
rcStatMltUtilTrafficLast1HourThis object returns the percentage of traffic on one MLT port interface for the last hour.ro Gauge32 .1.3.6.1.4.1.2272.1.12.6.33.1.5 |
rcMltMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.17.0 |
rcMltNumMltsThe number of MLTs currently defined in the switch.ro Integer32 .1.3.6.1.4.1.2272.1.17.1 |
rcMltPotentialMembersThe set of ports that are not members of any MLT.ro PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.2 |
rcMltIstSessionEnableUsed to enable/disable mlt functionality.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.3 |
rcMltIstSessionStatusUsed to enable/disable mlt functionality.ro Enumeration .1.3.6.1.4.1.2272.1.17.4 |
rcMltIstPeerIpIST mlt Peer Ip address.rw IpAddress .1.3.6.1.4.1.2272.1.17.5 |
rcMltIstVlanIdIST mlt Vlan Id.rw Integer32 .1.3.6.1.4.1.2272.1.17.6 |
rcMltDisablePortsOnShutdownWhen true(1), the port members of an MLT will be
automatically shutdown when the MLT becomes disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.7 |
rcMltTableA list of Multi-Link Trunk entries. The number of
entries is given by rcMltNumMlts. SEQUENCE OF RcMltEntry .1.3.6.1.4.1.2272.1.17.10 |
rcMltEntryEntry containing configuration information for a
particular Multi-Link Trunk. RcMltEntry .1.3.6.1.4.1.2272.1.17.10.1 |
rcMltIdA value that uniquely identifies the Multi-Link
Trunk associated with this entry.ro Integer32 .1.3.6.1.4.1.2272.1.17.10.1.1 |
rcMltNameAn administratively-assigned name for this MLT.rw DisplayString .1.3.6.1.4.1.2272.1.17.10.1.2 |
rcMltPortMembersThe set of ports that are members of this MLT.rw PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.3 |
rcMltPortTypeThe type of MLT port: access(1) or trunk(2).rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.4 |
rcMltNumVlanIdsUsed to indicate the number of VLAN IDs that
are stored in the rcMltVlanIds variable.ro Integer32 .1.3.6.1.4.1.2272.1.17.10.1.5 |
rcMltVlanIdsAn array used to identify which VLANs this MLT
is associated with. Each VLAN ID is stored as a
two octet value. The first octet in the pair holds
bits 15-8 of the VLAN ID, while the second octet
holds bits 7-0 of the VLAN ID.rw IdList .1.3.6.1.4.1.2272.1.17.10.1.6 |
rcMltRowStatusUsed to create/delete entries in the rcMltTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.7 |
rcMltEnableEnable the entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.8 |
rcMltLoadBalancePerform load balance?rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.9 |
rcMltDistributionAlgorithmThe load balancing algorithm.rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.10 |
rcMltIfIndexUsed to indicate the 'logical' ifIndex assigned to
this MLT.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2272.1.17.10.1.11 |
rcMltMltTypeMLT type.rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.12 |
rcMltSmltIdSplit MLT id.rw Integer32 .1.3.6.1.4.1.2272.1.17.10.1.13 |
rcMltRunningTypeSplit MLT running type.ro Enumeration .1.3.6.1.4.1.2272.1.17.10.1.14 |
rcMltSvlanPortTypeSet MLT port type.rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.15 |
rcMltMulticastDistributionEnable/Disable multicast distribution per mlt.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.16 |
rcMltLacp10gBackupEnable/Disable 10G Mlt reliance backup mode.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.17 |
rcMltAggregatableEnable/Disable link aggregation on a MLT.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.18 |
rcMltClearLinkAggregateclear link aggregate, equivalent to disable and
re-enable aggregatable on the MLT.rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.19 |
rcMltNtStgEnableIndicates whether this MLT is operating in
Nortel Mode or in Cisco Mode.
true = Nortel Mode
false = Cisco Mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.20 |
rcMltDesignatedPortIndicates the Designated port for the MLT.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.17.10.1.21 |
rcMltAggOperStateLink aggregation state on a MLT.ro EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.22 |
rcMltAggTimeOfLastOperChangeThe time value since the interface entered its
current operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2272.1.17.10.1.23 |
rcMltVplsMgmtVlanManagement Vlan is configured on this mltrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.24 |
rcMltLoadDistributionOptionUsed to specify the Load Balancing option for MLT in UNIrw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.25 |
rcMltUniAggrMacIdxUsed to specify the index of the mac address pool reserved for MLT unirw Integer32 .1.3.6.1.4.1.2272.1.17.10.1.26 |
rcMltUniAggrMacAddressUsed to display the mac address reserved for this MLTro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.27 |
rcMltQinqEtherTypeThe qinq ether type value. It should be displayed
and input as Hex value. It would only be used when
MLT is associated with QnQ service UNI. Otherwise,
it would be ignoredrw Integer32 (1..'FFFF'h) .1.3.6.1.4.1.2272.1.17.10.1.28 |
rcMltEgressCosProfileNameMlt Egress COS Profile Name, which is defined by
rcCosProfileTablerw DisplayString .1.3.6.1.4.1.2272.1.17.10.1.29 |
rcMltEgressPolicerAdminStateEnable/disable Mlt Egress Policerrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.30 |
rcMltAggrEgressBandwidthAggregated Egress Bandwidth Policer is used.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.31 |
rcMltAggrIngressBandwidthAggregated Ingress Bandwidth Policer is used.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.32 |
rcMltAggrMacAllocAggregated Mac Allocation is usedrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.33 |
rcMltAggMinLinkIf number of active links goes below configured
minimum-link number, the entire LAG is declared
down.rw Integer32 .1.3.6.1.4.1.2272.1.17.10.1.34 |
rcMltMtuMTU for ports in Mltrw Integer32 .1.3.6.1.4.1.2272.1.17.10.1.35 |
rcMltInterfaceTypeThis value indicates whether ports in the mlt are of type
<normal/silent/uni>. A port can be included in any EVPN
service only if this attribute is set to uni. If the port
is not part of any VLAN the interface-type is set to silent.
Before adding a port to a VLAN the interface type should
be changed to normal.rw Enumeration .1.3.6.1.4.1.2272.1.17.10.1.36 |
rcMltConfiguredMembersThe set of ports that are configured members of this MLT.
Toronto release allows us to add a port to a LACP enabled
MLT. These port get added as ConfiguredMembersrw PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.37 |
rcMltMtuAdminStateSet Mlt MTU enable or disablerw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.38 |
rcMltPeerPortMembersThe set of Peer ports which are connected to local
ports (rcMltPortMember) of this MLTro PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.17.10.1.39 |
rcMltCpLimitPktRateUsed to limit Control packets on the
port to qos-levels 6 and 7.
Sets the limit in packets per second.rw Integer32 .1.3.6.1.4.1.2272.1.17.10.1.40 |
rcMltCpLimitShutDownEnableUsed to indicate if the mlt-ports should be
shutdown when the CpLimitPktRate is exceeded.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.10.1.41 |
rcMltVlanIdListThis bitfield is used to identify which VLANs this MLT
is associated with. Each VLAN ID is stored as a bit.
The most-significant (left-most) bit represents
Vlan Id 1.rw OCTET STRING .1.3.6.1.4.1.2272.1.17.10.1.42 |
rcMltEntryOwnerDefines the owner of the MLT.ro Enumeration .1.3.6.1.4.1.2272.1.17.10.1.43 |
rcMltDatapathProgrammingStateDefines the datapath programming state of
the MLT.ro Enumeration .1.3.6.1.4.1.2272.1.17.10.1.44 |
rcMltMcastDistribution OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.17.11 |
rcMltMcastDistributionEnableUsed to enable/disable this feature to
distribute multicast traffic on MLT ports. All
the cards in the system must be E-Tickets.
Cannot perform distribution in a mixed mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.11.1 |
rcMltMcastDistributionGrpMaskGroup Mask. Create a MLT abstraction layer to
distribute traffic basd on (source, group) information
of the multicast packet. The algorithm to pick
the actual port nedds to generate a fairly random
number for different combinations but a lways generate
the same number for a given (source, group) pair. By
default, the number of active ports of the MLT is used
to MOD the pseudo-random number generated by the XOR
of each byte of the masked group address with the
masked source address.rw IpAddress .1.3.6.1.4.1.2272.1.17.11.2 |
rcMltMcastDistributionSrcMaskSource Mask.rw IpAddress .1.3.6.1.4.1.2272.1.17.11.3 |
rcMltMcastDistributionRedistributionEnableEnable redistribution.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.11.4 |
rcSltPortTableTable containing config info for SLT SEQUENCE OF RcSltPortEntry .1.3.6.1.4.1.2272.1.17.12 |
rcSltPortEntryEntry containing configuration information for a
particular Multi-Link Trunk. RcSltPortEntry .1.3.6.1.4.1.2272.1.17.12.1 |
rcSltPortIfIndexAn interface for this SLT.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.17.12.1.1 |
rcSltPortSmltIdA uniquely identifies the Single-Link
Trunk associated with this entry.rw Integer32 .1.3.6.1.4.1.2272.1.17.12.1.2 |
rcSltPortOperTypeThe current operate type of the port normal
or smlt.ro Enumeration .1.3.6.1.4.1.2272.1.17.12.1.3 |
rcSltPortRowStatusUsed to create/delete entries of the Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.12.1.4 |
rcMltVlacpTableMlt Virtual LACP table SEQUENCE OF RcMltVlacpEntry .1.3.6.1.4.1.2272.1.17.13 |
rcMltVlacpEntryEntry containing info. for a particular port RcMltVlacpEntry .1.3.6.1.4.1.2272.1.17.13.1 |
rcMltVlacpAdminEnableAdministratively enable/disable Virtual LACP on a MLTrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.13.1.1 |
rcMltVlacpFastPeriodicTimerThe number of miliseconds between periodic transmissions
using Short Timeoutsrw Integer32 .1.3.6.1.4.1.2272.1.17.13.1.2 |
rcMltVlacpTimeoutScaleScalar value used to calculate timeout time from
periodic time. Timeout = PeriodicTime * TimeoutScalerw Integer32 .1.3.6.1.4.1.2272.1.17.13.1.3 |
rcMltVlacpEtherMacAddressMulticast Mac Address exclusively used for VLACPDU'srw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.13.1.4 |
rcMltVlacpDualHomingEnableEnable/Disable Dual homing on Virtual LACP on a MLTrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.13.1.5 |
rcMltBvidPortTableTable contains Bridge Vlan configured information for
Primary and Secondary ports for MLT-UNI SEQUENCE OF RcMltBvidPortEntry .1.3.6.1.4.1.2272.1.17.14 |
rcMltBvidPortEntryEntry with Info about VLAN with its Primary and secondary ports for MLT-UNI RcMltBvidPortEntry .1.3.6.1.4.1.2272.1.17.14.1 |
rcMltBvidMltIdVLAN ID of the Port List Integer32 .1.3.6.1.4.1.2272.1.17.14.1.1 |
rcMltBvidVlanIdVLAN ID of the Port List Integer32 .1.3.6.1.4.1.2272.1.17.14.1.2 |
rcMltBvidPrimaryPortPrimary port of the MLT for the VLAN when load distribution option is b-vidrw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.17.14.1.3 |
rcMltBvidSecondaryPortSecondary port of the MLT for the VLAN when load distribution option is b-vidrw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.17.14.1.4 |
rcMltBvidRowStatusUsed to Add/delete entries in the tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.17.14.1.5 |
rcMltNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.17.15 |
rcMltAggTrapEventThree trap events type: local down(1),
remote down(2), up(3).ro Enumeration .1.3.6.1.4.1.2272.1.17.15.1 |
rcLinkFlapDetectAutoPortDownEnableUsed to enable/disable the Link Flap Detect
feature. When enabled this feature will monitor
the number of times a port goes down during a
certain interval. If the number exceeds a given
bound the port will be forced out-of-service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.27.1 |
rcLinkFlapDetectSendTrapUsed to configure whether a trap should be
sent if the port is forced out-of-service.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.27.2 |
rcLinkFlapDetectFrequencyUsed to configure the number of times the port
can go down.rw Integer32 .1.3.6.1.4.1.2272.1.27.3 |
rcLinkFlapDetectIntervalUsed to configure the interval (in minutes).rw Integer32 .1.3.6.1.4.1.2272.1.27.4 |
rcL2RedundancyHaCpuStateIndicate the Ha-CPU state.
initialization - indicate the CPU is in this state.
oneWayActive - Modules that need to be
synchronized have registered with the framework (either
locally or a message was received from remote CPU (1).
twoWayActive - Modules that need to be synchronized have
registered with the framework (either locally or a message
was received from remote CPU (2).
synchronized - Table based synchroniztion was completed
on the current CPU (3).
remoteIncompatible - CPUs framework version is incompatible
with the remote CPU (4).
error - If an invalid event is generated in a given state the
CPU enters Error state (5).
disabled - High Availability is not enabled (6).
peerNotConnected - no peer connection is established (7).
peerConnected - peer connection is established (8).
lostPeerConnection - lost connection to peer/Standby CPU (9).
notSynchronized - Table Sync is not complete (10).
synchronizeInProgress - Table Sync is in progress (11).ro Enumeration .1.3.6.1.4.1.2272.1.32.1 |
rcL2RedundancyHaEventIndicate the Ha event status.
restart (0) - Causes the state machine to restart
systemRegistrationDone (1)- Causes the CPU to transfer to
One Way or Two Way Active state. Locally or message received
from remote CPU.
tableSynchronizationDone (2) - Causes the CPU to
transfer to Synchronized state.
versionIncompatible (3) - Causes the CPU to go to Remote
Incompatible state
noEvent (4) - Means no event has occured uptill now.ro Enumeration .1.3.6.1.4.1.2272.1.32.2 |
rcL2RedundancyEnableIndicate the feature enable/disable.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.32.3 |
rcL2RedundancyStandbyCpuIndicate if the L2 Redundancy is enabled on the standby CPU.ro Enumeration .1.3.6.1.4.1.2272.1.32.4 |