RC-IP-BGP-MIB
Enterprise MIB for the Accelar product family.
Main OID:
rcIpBgpMib.1.3.6.1.4.1.2272.1.8.101.0
116
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
116 total| Object Name |
|---|
rcIpBgpMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.8.101.0 |
rcIpBgpGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.1 |
rcIpBgpGeneralGroupLocalAsLocal Autonomous system numberrw INTEGER .1.3.6.1.4.1.2272.1.8.101.1.1 |
rcIpBgpGeneralGroupAdminStatusDisable or Enable group administrativerw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.2 |
rcIpBgpGeneralGroupDefaultMetricThe default-metric is used in conjunction with
the redistribute router configuration command to cause
the bgp routing protocol to use this metric as MEDrw INTEGER (-1..2147483647) .1.3.6.1.4.1.2272.1.8.101.1.3 |
rcIpBgpGeneralGroupDefaultLocalPreferenceDefault local preference attribute value to be usedrw INTEGER .1.3.6.1.4.1.2272.1.8.101.1.4 |
rcIpBgpGeneralGroupDefaultInformationOriginateallows the redistribution of network 0.0.0.0 into BGPrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.1.5 |
rcIpBgpGeneralGroupBestPathMissingAsWorstEnable to consider a missing MED attribute in a path
as having a value of infinity, making the path without a
MED value the least desirable path. To return the router
to the default (assign a value of 0 to the missing MED),
set the value to disable.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.6 |
rcIpBgpGeneralGroupBestPathMedConfedTo enable MED comparison among paths learned from
confederation peers. Disable to prevent considering
the MED attribute in comparing pathsrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.7 |
rcIpBgpGeneralGroupIgnoreIllegalRouterIdConfigures BGP to overlook an illegal router ID.
Enables or disable accepting a connection from a peer
that sends its open message with a router ID of 0.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.8 |
rcIpBgpGeneralGroupAlwaysCompareMedEnable to allow the comparison of the Multi Exit
Discriminator (MED) for paths from neighbors in
different autonomous systems.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.9 |
rcIpBgpGeneralGroupAutoPeerRestartEnable the feature that automatically restarts the
connection to a BGP peer when the connection goes down.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.10 |
rcIpBgpGeneralGroupAutoSummaryEnable BGP to summarize networks based on class limlts
(Class A,B,C networks).rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.11 |
rcIpBgpGeneralGroupSynchronizationEnables and disables the router from accepting routes
from BGP peers without waiting for an update from the
IBGP.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.12 |
rcIpBgpGeneralGroupMaxEqualcostRoutesSets the number of maximum number of equal-cost routes
that can be stored in the routing table.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.1.13 |
rcIpBgpGeneralGroupIbgpReportImportRouteConfigure BGP to report imported routes to an interior
BGP peer.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.14 |
rcIpBgpGeneralGroupAggregaterw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.15 |
rcIpBgpGeneralGroupFlapDampEnableEnabled or Disabledrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.16 |
rcIpBgpGeneralGroupDebugMaskvalue is one of multiple (logiacally by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
state(32),
init(64),
filter(128),
update(256),
all(511)
all(511): Enables all debugging messages.
none(0): Disables all debugging messages.
error(1): Enables disolay of debug error messages.
packet(2): Enables display of debug packet messages.
event(4): Enables display of debug event messages.
trace(8): Enables display debug trace messages.
warning(16): Enables display debug warning messages.
state(32): Enables display of debug state transition
messages.
init(64): Enables display of debug initialization messages.
filter(128): Enables display of debug messages related to
filtering.
update(256): Enables display of debug messages related to
sending and receiving updates.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.1.17 |
rcIpBgpGeneralGroupTrapEnablerw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.18 |
rcIpBgpGeneralGroupQuickStartEnable the flag to avoid flap penalty and trigger
the peer start event quicklyrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.19 |
rcIpBgpGeneralGroupDeterministicMedEnable to allow the comparison of the Multi Exit
Discriminator (MED) for paths from neighbors in
same autonomous system.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.1.20 |
rcIpBgpAggregateTableSizeSize of Aggregate Tablero Integer32 .1.3.6.1.4.1.2272.1.8.101.2 |
rcIpBgpAggregateTableTo specify the list of aggregate prefixes to be
created by the BGP routing process and the options
to be used while aggregating. SEQUENCE OF RcIpBgpAggregateEntry .1.3.6.1.4.1.2272.1.8.101.3 |
rcIpBgpAggregateEntryAn entry of rcIpBgp Aggregate Address In Table. RcIpBgpAggregateEntry .1.3.6.1.4.1.2272.1.8.101.3.1 |
rcIpBgpAggregateAddressPrefix to create an aggregate address in BGP routing table.ro IpAddress .1.3.6.1.4.1.2272.1.8.101.3.1.1 |
rcIpBgpAggregateMaskMask for the aggregratero IpAddress .1.3.6.1.4.1.2272.1.8.101.3.1.2 |
rcIpBgpAggregateAsSetGenerateEnable Generates autonomous system set path
information.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.3.1.3 |
rcIpBgpAggregateSummaryOnlyFilters all more specific routes from updates.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.3.1.4 |
rcIpBgpAggregateSuppressPolicyName of route policy used to select the
routes to be suppressed.rw DisplayString .1.3.6.1.4.1.2272.1.8.101.3.1.5 |
rcIpBgpAggregateAdvertisePolicyName of route policy used to select the
routes to create AS-SET origin communities.rw DisplayString .1.3.6.1.4.1.2272.1.8.101.3.1.6 |
rcIpBgpAggregateAttributePolicyName of route policy used to set the
attribute of the aggregate route.rw DisplayString .1.3.6.1.4.1.2272.1.8.101.3.1.7 |
rcIpBgpAggregateRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.3.1.8 |
rcIpBgpConfederationGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.4 |
rcIpBgpConfederationIdentifierConfederation AS identifierrw INTEGER .1.3.6.1.4.1.2272.1.8.101.4.1 |
rcIpBgpConfederationPeersThe string represents ConfederatoinPeers as <length,
value>. Maximum size 255,if any, will not be recorded
by this object.
The length is a 1-octet field containing the numbner
of peers in the value field.
The value field contains one or more peers (AS numbers
which are part of the confederation).
Each AS is represented in the octet
string as a pair of octets according to the
following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;rw OCTET STRING .1.3.6.1.4.1.2272.1.8.101.4.2 |
rcIpBgpRouteReflectorGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.101.5 |
rcIpBgpRouteReflectionEnableEnable Route Reflection on this routerrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.5.1 |
rcIpBgpRouteReflectorClusterIdCluster ID of this router acting as a route reflectorrw IpAddress .1.3.6.1.4.1.2272.1.8.101.5.2 |
rcIpBgpRouteReflectorClientToClientReflectionWhen this router is configured as a route reflector, and
the clients are fully meshed, a Disable value disables
reflection of routes from one client to another.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.5.3 |
rcIpBgpNetworkTableSizeNetwork Prefix table sizero Integer32 .1.3.6.1.4.1.2272.1.8.101.6 |
rcIpBgpNetworkTableThe networks in this table are either static/directly
connected or learned routes. Bgp advertises these
network provided they are reachable and are in the IP
routing table SEQUENCE OF RcIpBgpNetworkEntry .1.3.6.1.4.1.2272.1.8.101.7 |
rcIpBgpNetworkEntryAn entry In NetworkTable. RcIpBgpNetworkEntry .1.3.6.1.4.1.2272.1.8.101.7.1 |
rcIpBgpNetworkAddrNetwork prefix that BGP will advertise.rw IpAddress .1.3.6.1.4.1.2272.1.8.101.7.1.1 |
rcIpBgpNetworkMaskNetwork maskro IpAddress .1.3.6.1.4.1.2272.1.8.101.7.1.2 |
rcIpBgpNetworkRowStatusRow status for create/delete.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.7.1.3 |
rcIpBgpNetworkMetricValue of the metric to be used while sending
an update for the routes from the network table.
Indicates to set the MED value for the routes
advertised to ebgp peers.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.7.1.4 |
rcIpBgpPeerTableSizeBGP peer table sizero Integer32 .1.3.6.1.4.1.2272.1.8.101.8 |
rcIpBgpPeerTableIP BGP Peer table SEQUENCE OF RcIpBgpPeerEntry .1.3.6.1.4.1.2272.1.8.101.9 |
rcIpBgpPeerEntryAn entry of Ip rcIpBgp Peer Table. RcIpBgpPeerEntry .1.3.6.1.4.1.2272.1.8.101.9.1 |
rcIpBgpPeerEnableEnable/Disable: controls whether the peer connection is enabled
or disabledrw Enumeration .1.3.6.1.4.1.2272.1.8.101.9.1.1 |
rcIpBgpPeerIpAddressThe Ip address of this peerro IpAddress .1.3.6.1.4.1.2272.1.8.101.9.1.2 |
rcIpBgpPeerRemoteAsRemote Autonomous system number of this peerrw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.3 |
rcIpBgpPeerGroupNamePeer group name to which this peer belongs (optional)rw DisplayString .1.3.6.1.4.1.2272.1.8.101.9.1.4 |
rcIpBgpPeerDefaultOriginateTo allow a BGP speaker (the local router) to send
the default route 0.0.0.0 to a neighbor for use as
a default routerw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.9.1.5 |
rcIpBgpPeerEbgpMultiHopTo accept and attempt BGP connections to external
peers residing on networks that are not directly
connectedrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.9.1.6 |
rcIpBgpPeerAdvertisementIntervalTo set the minimum interval between the sending of
BGP routing updates Time in seconds. Integer from 5
to 120.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.7 |
rcIpBgpPeerPasswordTo enable MD5 authentication on a TCP connection
between two BGP peers Case-sensitive password of
up to 80 characterrw DisplayString .1.3.6.1.4.1.2272.1.8.101.9.1.8 |
rcIpBgpPeerWeightTo assign an absolute weight to a BGP network.
It can be an integer from 0 to 65535.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.9 |
rcIpBgpPeerMaxPrefixSets a limit on the number of routes that will be
accepted from a neighbor. A value of zero indicates no
limitrw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.10 |
rcIpBgpPeerNextHopSelfSet NextHop Attribute to local router address before
sending updates to remote peerrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.9.1.11 |
rcIpBgpPeerRoutePolicyInRoute Policy Name that will be applied to all networks
learned from this peerrw DisplayString .1.3.6.1.4.1.2272.1.8.101.9.1.12 |
rcIpBgpPeerRoutePolicyOutRoute policy name that will be applied to all outgoing
updatesrw DisplayString .1.3.6.1.4.1.2272.1.8.101.9.1.13 |
rcIpBgpPeerRouteReflectorClientIndicates whether this peer is a route reflector client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.9.1.14 |
rcIpBgpPeerSoftReconfigurationInIf Peer soft reconfiguration is enabled in the in-bound
direction, policy can be changed and routes can
re-learned without having to reset the bgp connection.
Enabling soft reconfig-in causes all bgp routes to be
stored in local memory (even non-best routes)rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.9.1.15 |
rcIpBgpPeerSoftReconfigurationIf rcIpBgpPeerSoftReconfigurationIn is enabled in the
in-bound direction, policy can be changed and routes can
re-learned without having to reset the bgp connection by
setting rcIpBgpPeerSoftReconfiguration to in(1). Setting
the value to out (2) forces the neighbor to send out all
the updates to the remote neighbor without resetting the
connection.rw Enumeration .1.3.6.1.4.1.2272.1.8.101.9.1.16 |
rcIpBgpPeerRemovePrivateAsEnable and disable private AS number from being
stripped when sending an updaterw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.9.1.17 |
rcIpBgpPeerRowStatusUsed to create/delete entries in the Table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.9.1.18 |
rcIpBgpPeerMD5AuthenticationEnable and Disable MD5 authenticationrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.9.1.19 |
rcIpBgpPeerDebugMaskvalue is one of multiple (logiacally by 'OR' of
following value:
none (0),
error(1),
packet(2),
event(4),
trace(8),
warning(16),
state(32),
init(64),
filter(128),
update(256),
all(511)
all(511): Enables all debugging messages.
none(0): Disables all debugging messages.
error(1): Enables disolay of debug error messages.
packet(2): Enables display of debug packet messages.
event(4): Enables display of debug event messages.
trace(8): Enables display debug trace messages.
warning(16): Enables display debug warning messages.
state(32): Enables display of debug state transtion
messages.
init(64): Enables display of debug initialization messages.
filter(128): Enables display of debug messages related to
filtering.
update(256): Enables display of debug messages related to
sending and receiving updates.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.20 |
rcIpBgpPeerSendCommunityrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.9.1.21 |
rcIpBgpPeerUpdateSourceInterfaceThe IP address to be used for Circuitless IP.rw IpAddress .1.3.6.1.4.1.2272.1.8.101.9.1.22 |
rcIpBgpPeerBgpMplsCutThroughTypeSpecifies whether the BGP to MPLS cut through being
used is an LSP or an LSP group.rw Enumeration .1.3.6.1.4.1.2272.1.8.101.9.1.23 |
rcIpBgpPeerBgpMplsCutThroughIdThe ID of LSP or LSP group being used for BGP to MPLS
cut through.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.9.1.24 |
rcIpBgpPeerStateThe BGP peer connection state.ro Enumeration .1.3.6.1.4.1.2272.1.8.101.9.1.25 |
rcIpBgpPeerLastErrorThe last error code and subcode seen by this
peer on this connection. If no error has
occurred, this field is zero. Otherwise, the
first byte of this two byte OCTET STRING
contains the error code, and the second byte
contains the subcode.ro OCTET STRING .1.3.6.1.4.1.2272.1.8.101.9.1.26 |
rcIpBgpPeerGroupTableSizeBGP Peer Group table sizero Integer32 .1.3.6.1.4.1.2272.1.8.101.10 |
rcIpBgpPeerGroupTableIP rcIpBgp Peer Group table. This table contains rows
which are template configuration parameters which are
shared by a group of peers. Peers belonging to the
same group will refer to the same row in this table
using a peer group name SEQUENCE OF RcIpBgpPeerGroupEntry .1.3.6.1.4.1.2272.1.8.101.11 |
rcIpBgpPeerGroupEntryAn entry of Ip rcIpBgp Peer Group Table. RcIpBgpPeerGroupEntry .1.3.6.1.4.1.2272.1.8.101.11.1 |
rcIpBgpPeerGroupEnableAllows disabling a group of peersrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.11.1.1 |
rcIpBgpPeerGroupIndexIndex in to the Peer Group Tablero INTEGER .1.3.6.1.4.1.2272.1.8.101.11.1.2 |
rcIpBgpPeerGroupGroupNameName of the BGP peer group to which this neighbor belongrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.3 |
rcIpBgpPeerGroupRemoteAsRemote Autonomous system number of this peer group
(optional)rw INTEGER .1.3.6.1.4.1.2272.1.8.101.11.1.4 |
rcIpBgpPeerGroupDefaultOriginateEnabling this attribute allows a BGP speaker
(the local router) to send the default route 0.0.0.0 to
the group of neighbors for use as a default route.rw Enumeration .1.3.6.1.4.1.2272.1.8.101.11.1.5 |
rcIpBgpPeerGroupEbgpMultiHopTo accept and attempt BGP connections to external
peers residing on networks that are not directly
connectedrw Enumeration .1.3.6.1.4.1.2272.1.8.101.11.1.6 |
rcIpBgpPeerGroupAdvertisementIntervalTo set the minimum interval between the sending of
BGP routing updates Time in seconds. Integer from 1
to 120.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.11.1.7 |
rcIpBgpPeerGroupKeepAliveTo set the time interval in seconds between the sending
of BGP keep alive messages to remote peers.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.11.1.8 |
rcIpBgpPeerGroupHoldTimeTo configure the hold time for the group of peers in
seconds. Usually set to three times the value of the
Keepalive timerw INTEGER .1.3.6.1.4.1.2272.1.8.101.11.1.9 |
rcIpBgpPeerGroupWeightTo assign an absolute weight to a BGP network.
Absolute weight, or importance.
It can be an integer from 0 to 65535.rw INTEGER .1.3.6.1.4.1.2272.1.8.101.11.1.10 |
rcIpBgpPeerGroupMaxPrefixSets a limit on the number of routes that will be
accepted from this group of neighbors. A value of zero
indicates no limitrw INTEGER .1.3.6.1.4.1.2272.1.8.101.11.1.11 |
rcIpBgpPeerGroupNextHopSelfSet NextHop Attribute to local router address before
sending updates to remote peersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.11.1.12 |
rcIpBgpPeerGroupRoutePolicyInRoute Policy Name that will be applied to all networks
learned from this group of peersrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.13 |
rcIpBgpPeerGroupRoutePolicyOutRoute policy name that will be applied to all
outgoing updates to this group of peersrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.14 |
rcIpBgpPeerGroupRouteReflectorClientIndicates whether this group of peers is a route reflector client.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.11.1.15 |
rcIpBgpPeerGroupSoftReconfigurationInIf Peer soft reconfiguration is enabled in the in bound
direction, policy can be changed and routes can
re-learned without having to reset the bgp connection.
Enabling soft reconfig-in causes all bgp routes to be
stored in local memory (even non-best routes)rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.11.1.16 |
rcIpBgpPeerGroupSoftReconfigurationIf Peer soft reconfiguration-in is enabled in the in
bound direction, policy can be changed and routes can
re-learned without having to reset the bgp connection by
setting rcIpBgpPeerGroupSoftReconfiguration to in(1).
Setting the value to out (2) forces the neighbor to send
out all the updates to the remote neighbor without
resetting the connection.rw Enumeration .1.3.6.1.4.1.2272.1.8.101.11.1.17 |
rcIpBgpPeerGroupPasswordTo enable MD5 authentication on TCP connections
between this local speaker and this group of BGP peers.
Case-sensitive password of up to 80 characterrw DisplayString .1.3.6.1.4.1.2272.1.8.101.11.1.18 |
rcIpBgpPeerGroupRemovePrivateAsEnable and disable private AS number from being
stripped when sending an updaterw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.11.1.19 |
rcIpBgpPeerGroupRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.101.11.1.20 |
rcIpBgpPeerGroupMD5AuthenticationEnable and Disable MD5 authenticationrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.11.1.21 |
rcIpBgpPeerGroupSendCommunityrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.101.11.1.22 |
rcIpBgpPeerGroupUpdateSourceInterfaceThe IP address to used for circuitless IP for this peer group.rw IpAddress .1.3.6.1.4.1.2272.1.8.101.11.1.23 |
rcIpBgpRcvdDampenedPathAttrTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.101.12 |
rcIpBgpRcvdDampenedPathAttrTableThis table contains info about paths to destination
networks received from all BGP-4 peers SEQUENCE OF RcIpBgpDampenedPathAttrEntry .1.3.6.1.4.1.2272.1.8.101.13 |
rcIpBgpDampenedPathAttrEntryInformation about a path to a networks RcIpBgpDampenedPathAttrEntry .1.3.6.1.4.1.2272.1.8.101.13.1 |
rcIpBgpPathAttrPeerThe IP address of the peer where the path info was
learnedro IpAddress .1.3.6.1.4.1.2272.1.8.101.13.1.1 |
rcIpBgpPathAttrIpAddrPrefixLenLength in bits of the IP address prefix in the network
Layer Reachablity Information field.ro INTEGER .1.3.6.1.4.1.2272.1.8.101.13.1.2 |
rcIpBgpPathAttrIpAddrPrefixAn Ip address prefix in the NLRI Information field.
This object is an IP address containing the prefix
with length specified by rcIpBgpPathAttrIpAddrPrefixLen
are zeroed.ro IpAddress .1.3.6.1.4.1.2272.1.8.101.13.1.3 |
rcIpBgpPathAttrFlapPenaltyPenalty value based on number of route flapsro Integer32 .1.3.6.1.4.1.2272.1.8.101.13.1.4 |
rcIpBgpPathAttrFlapCountNumber of times a route flapped since the last time the
penalty was reset to zeroro Integer32 .1.3.6.1.4.1.2272.1.8.101.13.1.5 |
rcIpBgpPathAttrRouteDampenedShows whether this route is currently suppressed from
being announcedro Enumeration .1.3.6.1.4.1.2272.1.8.101.13.1.6 |
rcIpBgpPathAttrReuseTimeRe use timero Integer32 .1.3.6.1.4.1.2272.1.8.101.13.1.7 |
rcIpBgpPathAttrReuseTimeRemainRe use time Remain is the number of seconds
before the route will be reusedro Integer32 .1.3.6.1.4.1.2272.1.8.101.13.1.8 |
rcIpBgp4PathAttrTableSizetable sizero Integer32 .1.3.6.1.4.1.2272.1.8.101.14 |
rcIpBgp4PathAttrTableThis table contains info about paths to destination
networks received from all BGP-4 peers SEQUENCE OF RcIpBgp4PathAttrEntry .1.3.6.1.4.1.2272.1.8.101.15 |
rcIpBgp4PathAttrEntryINDEX { rcIpBgp4PathAttrIpAddrPrefix,
rcIpBgp4PathAttrIpAddrPrefixLen,
rcIpBgp4PathAttrPeer
}
::= { rcIpBgp4PathAttrTable 1 }
RcIpBgp4PathAttrEntry ::=
SEQUENCE {
rcIpBgp4PathAttrPeer IpAddress,
rcIpBgp4PathAttrIpAddrPrefixLen INTEGER,
rcIpBgp4PathAttrIpAddrPrefix IpAddress,
rcIpBgp4PathAttrCommunities OCTET STRING,
rcIpBgp4PathAttrOriginateId IpAddress,
rcIpBgp4PathAttrClusterId OCTET STRING
}
rcIpBgp4PathAttrPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION RcIpBgp4PathAttrEntry .1.3.6.1.4.1.2272.1.12.11.1.86 |