RC-IGMP-MIB
AI MIB Summary
The RC-IGMP-MIB facilitates the monitoring and management of Internet Group Management Protocol (IGMP) state variables, including group membership counts, query intervals, and router advertisements, specifically on Accelar enterprise networking hardware. This module enables administrators to track multicast session dynamics and verify IGMP snooping or proxy configurations to ensure efficient Layer 2 multicast traffic delivery.
Enterprise MIB for the Accelar product family.
Main OID:
rcIgmpMib.1.3.6.1.4.1.2272.1.30.0
140
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
140 total| Object Name |
|---|
rcIpConfIgmpTableA table used to maintain IGMP information
for a particular interface.deprecated SEQUENCE OF RcIpConfIgmpEntry .1.3.6.1.4.1.2272.1.8.5 |
rcIpConfIgmpEntryEntry containing IGMP information. An entry is
automatically created in this table when routing
is enabled for an interface -or- when an ip address
is configured on an interface.deprecated RcIpConfIgmpEntry .1.3.6.1.4.1.2272.1.8.5.1 |
rcIpConfIgmpIfIndexAn unique value to identify a physical
interface or a logical interface (VLAN).rodeprecated INTEGER .1.3.6.1.4.1.2272.1.8.5.1.1 |
rcIpConfIgmpQueryIntervalThe frequency at which IGMP Host-Query packets are
transmitted on this interface.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.5.1.2 |
rcIpConfIgmpVersionThe version of IGMP which is running on this
interface. This object can be used to configure a
router capable of running either value. For IGMP
to function correctly, all routers on a LAN must
be configured to run the same version of IGMP on
that LAN.rwdeprecated Enumeration .1.3.6.1.4.1.2272.1.8.5.1.3 |
rcIpConfIgmpQueryMaxResponseTimeThe maximum query response time advertised in
IGMPv2 queries on this interface. Smaller values
allow a router to prune groups faster.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.5.1.4 |
rcIpConfIgmpQuerierPresentTimeoutA timeout interval. If no IGMPv2 queries are
heard on this interface within this timeout
interval, the local router will take over the
Querier on the IP subnet to which this interface
is attached.rwdeprecated Integer32 .1.3.6.1.4.1.2272.1.8.5.1.5 |
rcIpConfIgmpLeaveEnabledAn indication of whether the processing of IGMPv2
Leave messages is enabled on this interface.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.5.1.6 |
rcIpConfIgmpRowStatusStatus of entry.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.5.1.7 |
rcIpConfIgmpRobustnesslossiness of network.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.5.1.8 |
rcIpConfIgmpLastMemberQueryIntervalmax response in GrpSpec Query.rwdeprecated INTEGER .1.3.6.1.4.1.2272.1.8.5.1.9 |
rcIpConfIgmpSnoopEnableEnable snoop.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.5.1.10 |
rcIpConfIgmpProxySnoopEnableEnable proxy snoop.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.5.1.11 |
rcIgmpGroupTableThe (conceptual) table listing the multicast
groups configured in the device. SEQUENCE OF RcIgmpGroupEntry .1.3.6.1.4.1.2272.1.8.6 |
rcIgmpGroupEntryAn entry (conceptual row) representing an
Igmp group. RcIgmpGroupEntry .1.3.6.1.4.1.2272.1.8.6.1 |
rcIgmpGroupIpAddressMulticast group Address (Class D) that others
want to join. A group address can be the same
for many incoming ports.ro IpAddress .1.3.6.1.4.1.2272.1.8.6.1.1 |
rcIgmpGroupMembersIP Address of a source that has sent group
report wishing to join this group.ro IpAddress .1.3.6.1.4.1.2272.1.8.6.1.2 |
rcIgmpGroupInPortAn unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources.ro INTEGER .1.3.6.1.4.1.2272.1.8.6.1.3 |
rcIgmpGroupExpirationTime left before the group report expired on this
port. Only one of this variable port. This
variable is updated upon receiving a group report.ro Integer32 .1.3.6.1.4.1.2272.1.8.6.1.4 |
rcIgmpGroupIfIndexAn unique value to identify a physical
interface or a logical interface (VLAN),
which has received Group reports from various
sources.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.8.6.1.5 |
rcIgmpGroupUserIdUser-id sending this groupro DisplayString .1.3.6.1.4.1.2272.1.8.6.1.6 |
rcIgmpGroupMemberStateUsed for IGAP, to indicated member state.ro Enumeration .1.3.6.1.4.1.2272.1.8.6.1.7 |
rcIgmpGroupSessionTimeUsed for IGAP, to indicated the session time
in seconds for the member. Session time is
started after traffic is available to member.
It can be also called AccountingTime since its
values correspondes to the accounting duration of
IGAP user session.ro Integer32 .1.3.6.1.4.1.2272.1.8.6.1.8 |
rcStatIgmp OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.12.4 |
rcStatIgmpInMsgsUsed to indicate the number of Igmp packets
received by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.1 |
rcStatIgmpInErrorsUsed to indicate the number of Igmp packets
received that are with checksum errors.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.2 |
rcStatIgmpInQueriesUsed to indicate the number of Igmp queries
received by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.3 |
rcStatIgmpInReportsUsed to indicate the number of Igmp reports
received by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.4 |
rcStatIgmpInLeavesUsed to indicate the number of Igmp Leaves
received by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.5 |
rcStatIgmpInvalidUsed to indicate the number of Igmp packets
received by the device that contained invalid
type.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.6 |
rcStatIgmpOutMsgsUsed to indicate the number of Igmp queries
sent by the device.ro Counter32 .1.3.6.1.4.1.2272.1.12.4.7 |
rcIgmpMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.30.0 |
rcIgmpInterfaceExtnTable SEQUENCE OF RcIgmpInterfaceExtnEntry .1.3.6.1.4.1.2272.1.30.1 |
rcIgmpInterfaceExtnEntry RcIgmpInterfaceExtnEntry .1.3.6.1.4.1.2272.1.30.1.1 |
rcIgmpInterfaceExtnIfIndexifindex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.1.1.1 |
rcIgmpInterfaceExtnSnoopEnableenable snoop.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.2 |
rcIgmpInterfaceExtnProxySnoopEnableenable proxy snoop.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.3 |
rcIgmpInterfaceExtnMaxAdvertiseIntervalrw INTEGER .1.3.6.1.4.1.2272.1.30.1.1.4 |
rcIgmpInterfaceExtnMinAdvertiseIntervalrw INTEGER .1.3.6.1.4.1.2272.1.30.1.1.5 |
rcIgmpInterfaceExtnMaxInitialAdvertiseIntervalrw Integer32 .1.3.6.1.4.1.2272.1.30.1.1.6 |
rcIgmpInterfaceExtnMaxInitialAdvertmentsrw Integer32 .1.3.6.1.4.1.2272.1.30.1.1.7 |
rcIgmpInterfaceExtnNeighborDeadIntervalrw Integer32 .1.3.6.1.4.1.2272.1.30.1.1.8 |
rcIgmpInterfaceExtnFastLeaveEnableEnable fast leave on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.9 |
rcIgmpInterfaceExtnFastLeavePortMembersThe set of ports that are enabled for fast leave.rw PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.10 |
rcIgmpInterfaceExtnMrdiscEnableEnable/disable multicast router discovery.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.11 |
rcIgmpInterfaceExtnDiscoveredRouterPortslist of ports that discovered by
IGMP Multicast router discovery
(MRDISC) protocol.ro PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.12 |
rcIgmpInterfaceExtnSnoopMRouterPortsThe set of ports in this interface that provide
connectivity to an IP Multicast router.rw PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.13 |
rcIgmpInterfaceExtnSnoopActiveMRouterPortsActive ports.ro PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.14 |
rcIgmpInterfaceExtnSnoopMRouterExpirationMulticast querier router aging time out.ro Integer32 .1.3.6.1.4.1.2272.1.30.1.1.15 |
rcIgmpInterfaceExtnFlushActionIGMP flush action.rw Enumeration .1.3.6.1.4.1.2272.1.30.1.1.16 |
rcIgmpInterfaceExtnRouterAlertEnableEnable Router Alert Check.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.17 |
rcIgmpInterfaceExtnSsmEnableenable SSM.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.1.1.18 |
rcIgmpInterfaceExtnIgapEnableenable/disable IGAP.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.19 |
rcIgmpInterfaceExtnAccntEnableenable/disable accounting.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.20 |
rcIgmpInterfaceExtnAuthEnableenable/disable authentication.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.21 |
rcIgmpInterfaceExtnStreamLimitEnableStream Limitation enable/disable.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.1.1.22 |
rcIgmpInterfaceExtnMaxStreamsMaximum number of stream.rw Integer32 .1.3.6.1.4.1.2272.1.30.1.1.23 |
rcIgmpInterfaceExtnNumStreamsCurrent number of streams.ro Integer32 .1.3.6.1.4.1.2272.1.30.1.1.24 |
rcIgmpInterfaceExtnNewQuerierThe address of the New IGMP Querier on
the IP subnet to which this interface is
attached.ro IpAddress .1.3.6.1.4.1.2272.1.30.1.1.25 |
rcIgmpStaticTable SEQUENCE OF RcIgmpStaticEntry .1.3.6.1.4.1.2272.1.30.2 |
rcIgmpStaticEntry RcIgmpStaticEntry .1.3.6.1.4.1.2272.1.30.2.1 |
rcIgmpStaticIfIndexifindexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.2.1.1 |
rcIgmpStaticGrpAddrIp multicast address. The GrpAddress holds the starting
ragne fo the address range, if the ToGrpAddress is not
entered, the it is as good as entering a single address.ro IpAddress .1.3.6.1.4.1.2272.1.30.2.1.2 |
rcIgmpStaticMemberPortsegressing ports.rw PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.2.1.3 |
rcIgmpStaticNotAllowedToJoinnot allowed to join.rw PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.2.1.4 |
rcIgmpStaticRowStatusUsed to create/delete entries in the rcIgmpStaticEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.2.1.5 |
rcIgmpStaticToGrpAddrTo hold the range for the GrpAddress.rw IpAddress .1.3.6.1.4.1.2272.1.30.2.1.6 |
rcIgmpAccessTable SEQUENCE OF RcIgmpAccessEntry .1.3.6.1.4.1.2272.1.30.3 |
rcIgmpAccessEntry RcIgmpAccessEntry .1.3.6.1.4.1.2272.1.30.3.1 |
rcIgmpAccessIfIndexifindexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.3.1.1 |
rcIgmpAccessGrpAddrip multicast addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.3.1.2 |
rcIgmpAccessHostAddrhost addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.3.1.3 |
rcIgmpAccessModedenyTX(1), denyRX(2), denyBOTH(3).rw Enumeration .1.3.6.1.4.1.2272.1.30.3.1.4 |
rcIgmpAccessRowStatusUsed to create/delete entries in the rcIgmpAccessEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.3.1.5 |
rcIgmpAccessHostMaskhost mask.ro IpAddress .1.3.6.1.4.1.2272.1.30.3.1.6 |
rcIgmpSenderTable SEQUENCE OF RcIgmpSenderEntry .1.3.6.1.4.1.2272.1.30.4 |
rcIgmpSenderEntry RcIgmpSenderEntry .1.3.6.1.4.1.2272.1.30.4.1 |
rcIgmpSenderGrpAddrip multicast addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.4.1.1 |
rcIgmpSenderIfIndexifindexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.4.1.2 |
rcIgmpSenderMemberAddrhost addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.4.1.3 |
rcIgmpSenderActionnone(0), flushEntry(1), flushGrp(2).rw Enumeration .1.3.6.1.4.1.2272.1.30.4.1.4 |
rcIgmpSenderTPortIgmp Sender Tport.ro Integer32 .1.3.6.1.4.1.2272.1.30.4.1.5 |
rcIgmpSenderStateIndicates if a sender exists because of an
IGMP access filter or not.ro Enumeration .1.3.6.1.4.1.2272.1.30.4.1.6 |
rcIgmpSsmGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.30.5 |
rcIgmpSsmGlobalDynamicLearningEnable/disable dynamic learning
or source/group pair from IVMPGv3 report.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.5.1 |
rcIgmpSsmGlobalAdminActionSet the admin status of all the Ssm entries to
enable/disable at once.rw Enumeration .1.3.6.1.4.1.2272.1.30.5.2 |
rcIgmpSsmGlobalRangeGroupIf multicast group address & RangeMask == RangeGroup,
then RangeGroup is in Ssm Range. Else it is not in
the range.rw IpAddress .1.3.6.1.4.1.2272.1.30.5.3 |
rcIgmpSsmGlobalRangeMaskUsed with RangeGroup.rw IpAddress .1.3.6.1.4.1.2272.1.30.5.4 |
rcIgmpSsmTable SEQUENCE OF RcIgmpSsmEntry .1.3.6.1.4.1.2272.1.30.6 |
rcIgmpSsmEntry RcIgmpSsmEntry .1.3.6.1.4.1.2272.1.30.6.1 |
rcIgmpSsmIpMulticastGrpThis is the IP multicast group address
that has default range of 232/8.
This parameter should be configured by the user.ro IpAddress .1.3.6.1.4.1.2272.1.30.6.1.1 |
rcIgmpSsmIpSourceThis is the Source's IP address that will
be sending traffic to the group source.
This parameter should be configured by the user.rw IpAddress .1.3.6.1.4.1.2272.1.30.6.1.2 |
rcIgmpSsmLearningModeThis is a read only field that provides
information if the entry is statically
configured entry (Static) or a dynamically
learned entry from IGMPv3 (Dynamic). Note
that Dynamic may not be used in the first
step of the implementation.ro Enumeration .1.3.6.1.4.1.2272.1.30.6.1.3 |
rcIgmpSsmActivityThis is a read only field. It provides
the activity on the corresponding (S,G). If
the source is active and traffic is flowing
to the switch, this field value should be
Active, otherwise it should say non-active.
This information is useful in knowing if the
group has an active source or not when the group
is joined by a member on the switch.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.6.1.4 |
rcIgmpSsmAdminStateThe admin state provides information on
whether the entry is to be used or not. If the
value of this field is Enabled (default), then
the entry can be used. If the state is Disabled,
then the entry will not be used, but will be
saved for future use.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.6.1.5 |
rcIgmpSsmRowStatusUsed to create/delete entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.6.1.6 |
rcIgmpNewAccessTable SEQUENCE OF RcIgmpNewAccessEntry .1.3.6.1.4.1.2272.1.30.7 |
rcIgmpNewAccessEntry RcIgmpNewAccessEntry .1.3.6.1.4.1.2272.1.30.7.1 |
rcIgmpNewAccessIfIndexifindexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.7.1.1 |
rcIgmpNewAccessPrefixListIdPrefix List ID.ro Integer32 .1.3.6.1.4.1.2272.1.30.7.1.2 |
rcIgmpNewAccessPrefixListNamePrefix List name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.7.1.3 |
rcIgmpNewAccessHostAddrhost addr.ro IpAddress .1.3.6.1.4.1.2272.1.30.7.1.4 |
rcIgmpNewAccessHostMaskhost mask.ro IpAddress .1.3.6.1.4.1.2272.1.30.7.1.5 |
rcIgmpNewAccessActionModeaction mode.rw Enumeration .1.3.6.1.4.1.2272.1.30.7.1.6 |
rcIgmpNewAccessRowStatusUsed to create/delete entries in the rcIgmpNewAccessEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.7.1.7 |
rcIgmpChannelLimitTable SEQUENCE OF RcIgmpChannelLimitEntry .1.3.6.1.4.1.2272.1.30.8 |
rcIgmpChannelLimitEntry RcIgmpChannelLimitEntry .1.3.6.1.4.1.2272.1.30.8.1 |
rcIgmpChannelLimitIfIndexifindexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.8.1.1 |
rcIgmpChannelLimitPortThe port belong to this vlan.ro Integer32 .1.3.6.1.4.1.2272.1.30.8.1.2 |
rcIgmpChannelLimitMaxStreamsMaximum number of stream.rw Integer32 .1.3.6.1.4.1.2272.1.30.8.1.3 |
rcIgmpChannelLimitNumStreamsCurrent number of streams.ro Integer32 .1.3.6.1.4.1.2272.1.30.8.1.4 |
rcIgmpChannelLimitRowStatusRow Status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.8.1.5 |
rcIgmpIgapServiceAbilityTable SEQUENCE OF RcIgmpIgapServiceAbilityEntry .1.3.6.1.4.1.2272.1.30.9 |
rcIgmpIgapServiceAbilityEntry RcIgmpIgapServiceAbilityEntry .1.3.6.1.4.1.2272.1.30.9.1 |
rcIgmpIgapServiceAbilityIfIndexifindexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.9.1.1 |
rcIgmpIgapServiceAbilityAuthSuccessThe port belong to this vlan.ro Counter64 .1.3.6.1.4.1.2272.1.30.9.1.2 |
rcIgmpIgapServiceAbilityAuthRejectMaximum number of stream.ro Counter64 .1.3.6.1.4.1.2272.1.30.9.1.3 |
rcIgmpIgapServiceAbilityRespTimeoutCurrent number of streams.ro Counter64 .1.3.6.1.4.1.2272.1.30.9.1.4 |
rcIgmpIgapServiceAbilityPapJoinReqRow Status.ro Counter64 .1.3.6.1.4.1.2272.1.30.9.1.5 |
rcIgmpIgapServiceAbilityBasicQueryCurrent number of streams.ro Counter64 .1.3.6.1.4.1.2272.1.30.9.1.6 |
rcIgmpIgapServiceAbilityBasicLeaveRow Status.ro Counter64 .1.3.6.1.4.1.2272.1.30.9.1.7 |
rcIgmpIgapServiceAbilityClearStatClear Counter.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.9.1.8 |
rcIgmpIgapGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.30.10 |
rcIgmpIgapGlobalClearAllStatClear All IGAP Counters.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.30.10.1 |
rcIgmpGlobalParams OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.30.11 |
rcIgmpFastLeaveModeSet the fast-leave mode to be used by for all
fast-leave enabled IGMP interfaces.rw Enumeration .1.3.6.1.4.1.2272.1.30.11.1 |
rcIgmpGenerateTrapEnabling the IGMP to generate trap.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.11.2 |
rcIgmpGenerateLogEnabling the IGMP to generate log.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.11.3 |
rcIgmpCacheExtnTable SEQUENCE OF RcIgmpCacheExtnEntry .1.3.6.1.4.1.2272.1.30.12 |
rcIgmpCacheExtnEntry RcIgmpCacheExtnEntry .1.3.6.1.4.1.2272.1.30.12.1 |
rcIgmpCacheExtnTypeIt takes up either of the two values, dynamic
or static depending upon whether the entry is
learnt Dynamic or is added statically.ro Enumeration .1.3.6.1.4.1.2272.1.30.12.1.1 |
rcIgmpCacheExtnStaticPortsIt displays the static ports for the static joins,
this would be null for the dynamic entry.ro PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.12.1.2 |
rcIgmpSnoopTraceTableThe table listing the multicast groups
traversing the snoop enabled router SEQUENCE OF RcIgmpSnoopTraceEntry .1.3.6.1.4.1.2272.1.30.13 |
rcIgmpSnoopTraceEntryThe entry listing the multicast groups
traversing the snoop enabled router RcIgmpSnoopTraceEntry .1.3.6.1.4.1.2272.1.30.13.1 |
rcIgmpSnoopGrpAddrip mcast addr of grp traversing the router IpAddress .1.3.6.1.4.1.2272.1.30.13.1.1 |
rcIgmpSnoopSrcAddrIp src addr of the mcast grp address IpAddress .1.3.6.1.4.1.2272.1.30.13.1.2 |
rcIgmpSnoopOutVlanEgress vlan id for the mcast group InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.13.1.3 |
rcIgmpSnoopInPortIngress port for the mcast grpro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.13.1.4 |
rcIgmpSnoopInVlanIngress vlan id for the mcast sourcero InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.30.13.1.5 |
rcIgmpSnoopOutPortEgress port of the mcast grpro PortSet (RAPID-CITY) .1.3.6.1.4.1.2272.1.30.13.1.6 |