RC-IP-MPLS-MIB
Enterprise MIB for the Accelar product family.
Main OID:
rcIpMplsMib.1.3.6.1.4.1.2272.1.8.102.0
172
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
172 total| Object Name |
|---|
rcIpMplsMibEnterprise MIB for the Accelar product family. MODULE-IDENTITY .1.3.6.1.4.1.2272.1.8.102.0 |
rcIpMplsGlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.102.1 |
rcIpMplsGlobalAdminStatusDisable or Enable MPLS globallyrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.102.1.1 |
rcIpMplsGlobalRouterIdIP address of the interface to be used as router-idrw IpAddress .1.3.6.1.4.1.2272.1.8.102.1.2 |
rcIpMplsGlobalAutomaticBeLspFlag to control automatic generation of next hop LSP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.1.3 |
rcIpMplsGlobalLspMergeNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.1.4 |
rcIpMplsGlobalDiffServDefNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.1.5 |
rcIpMplsGlobalTtlTo set the time to live in hops when IP packets
are being encapsulated in MPLSrw INTEGER .1.3.6.1.4.1.2272.1.8.102.1.6 |
rcIpMplsGlobalLabelMgmtFlagTo set the time to live in hops when IP packets
are being encapsulated in MPLSrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.1.7 |
rcIpMplsGlobalSessionMgmtFlagTo set the time to live in hops when IP packets
are being encapsulated in MPLSrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.1.8 |
rcIpMplsGlobalLspMgmtFlagTo set the time to live in hops when IP packets
are being encapsulated in MPLSrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.1.9 |
rcIpMplsGlobalTrafficControlFlagTo set the time to live in hops when IP packets
are being encapsulated in MPLSrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.1.10 |
rcIpMplsGlobalInactiveLspRestartTimeTimer to initiate setting up a tunnel that previously failed.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.1.11 |
rcIpMplsGlobalInactiveLspRestartCountThis parameter - if set to
some non-zero (1-255) value, after that many failed trial of
initiating a tunnel it will stop re-trying. But if set to 0(zero)
it will keep on trying as before. The default value is 0(zero)
for backward compatability.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.1.12 |
rcIpMplsInterfaceTableSizeSize of Mpls Interface Tablero Integer32 .1.3.6.1.4.1.2272.1.8.102.2 |
rcIpMplsInterfaceTableTable of configured Mpls Interfaces. SEQUENCE OF RcIpMplsInterfaceEntry .1.3.6.1.4.1.2272.1.8.102.3 |
rcIpMplsInterfaceEntryAn entry of rcIpMpls Interfaces In Table. RcIpMplsInterfaceEntry .1.3.6.1.4.1.2272.1.8.102.3.1 |
rcIpMplsInterfaceIndexInterface index for the IP interface.ro Integer32 .1.3.6.1.4.1.2272.1.8.102.3.1.1 |
rcIpMplsInterfaceLay3AddrLayer 3 address for the MPLS interface.rw IpAddress .1.3.6.1.4.1.2272.1.8.102.3.1.2 |
rcIpMplsInterfaceLay3MaskLayer 3 mask for the MPLS interface.rw IpAddress .1.3.6.1.4.1.2272.1.8.102.3.1.3 |
rcIpMplsInterfaceAdminStatusIndicates whether the MPLS interface is enabled or not.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.102.3.1.4 |
rcIpMplsInterfaceIndLblDistModeIndicates if the label distribution mode is independent or ordered.rw Enumeration .1.3.6.1.4.1.2272.1.8.102.3.1.5 |
rcIpMplsInterfaceConsLblRetenModeIndicates if conservative or liberal retention mode is used for the MPLS interface.rw Enumeration .1.3.6.1.4.1.2272.1.8.102.3.1.6 |
rcIpMplsInterfaceImdLblUseModeIndicates what label-use-mode is used by the MPLS interface.rw Enumeration .1.3.6.1.4.1.2272.1.8.102.3.1.7 |
rcIpMplsInterfaceNoRouteReqRetryModeNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.3.1.8 |
rcIpMplsInterfacePenultimatePopRequestFlag to indicate whether to give implicit
NULL labels for local networks.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.3.1.9 |
rcIpMplsInterfacePropogateLabelReleaseRequestNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.3.1.10 |
rcIpMplsInterfaceLabelRequestModeIndicates the label requiest mode used by the MPLS interface.rw Enumeration .1.3.6.1.4.1.2272.1.8.102.3.1.11 |
rcIpMplsInterfaceOnDemandAdvModeIndicates the label advertise mode used by the MPLS interface.rw Enumeration .1.3.6.1.4.1.2272.1.8.102.3.1.12 |
rcIpMplsInterfaceMtuNot used in this release.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.3.1.13 |
rcIpMplsInterfaceLabelProtocolIndicates the label protocol used by the interface.rw Enumeration .1.3.6.1.4.1.2272.1.8.102.3.1.14 |
rcIpMplsInterfaceTraceFlagFlag used for tracing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.3.1.15 |
rcIpMplsInterfaceRowStatusRow Status for create/deleterw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.3.1.16 |
rcIpMplsRsvpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.102.4 |
rcIpMplsRsvpAdminStatusState of global RSVP - enabled or disabledrw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.102.4.1 |
rcIpMplsRsvpPathUpdateTimeTime interval in seconds to update
PATH soft statesrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.2 |
rcIpMplsRsvpResvUpdateTimeTime interval in seconds to update
RESV soft statesrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.3 |
rcIpMplsRsvpHelloTimeTime interval in milli-seconds to send hello messagerw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.4 |
rcIpMplsRsvpBlockStateAgingTimePSB blockade state aging time in secondsrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.5 |
rcIpMplsRsvpMaxBundleMsgSizeMaximum BUNDLE message sizerw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.6 |
rcIpMplsRsvpMaxBundleMsgTimeMaximum time in milli-seconds for an outgoing
RSVP message to wait before being sent in the outgoing
BUNDLE messagerw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.7 |
rcIpMplsRsvpMaxAckMsgTimeMaximum time in milli-seconds for an outgoing
RSVP MESSAGE_ID_ACK/ RSVP MESSAGE_ID_NACK
object to wait before being sent as a piggy-back
in an unrelated RSVP message or in a separate ACK messagerw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.8 |
rcIpMplsRsvpMaxAckMsgsMaximum number of RSVP MESSAGE_ID_ACK/ RSVP MESSAGE_ID_NACK
objects to be sent in a single RSVP ACK messagerw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.9 |
rcIpMplsRsvpMaxMsgIdListSizeMaximum size of MESSAGE_ID_LIST object in MESSAGE_IDsrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.10 |
rcIpMplsRsvpMaxMsgIdListTimeMaximum time in milli-seconds for an outgoing
RSVP refresh message to wait before being sent outrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.11 |
rcIpMplsRsvpMaxPiggyBackMsgAcksMaximum number of RSVP MESSAGE_ID_ACK/
RSVP MESSAGE_ID_NACK objects to be piggy-backed on a
single RSVP non-ACK messagerw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.12 |
rcIpMplsRsvpPathAgingTimeMultPATH soft state aging time multiplier - how many times
to miss PATH refresh before considering PSB aged outrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.13 |
rcIpMplsRsvpResvAgingTimeMultRESV soft state aging time multiplier - how many times
to miss RESV refresh before considering RSB filterspec aged outrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.14 |
rcIpMplsRsvpHelloAgingTimeMultHello aging time multiplier - how many times
to miss Hello/HelloAck message before considering link downrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.15 |
rcIpMplsRsvpPathVectorLimitPath vector limitrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.16 |
rcIpMplsRsvpHopCountLimitMaximum hop countrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.17 |
rcIpMplsRsvpRapidRetransTimeInitial rapid re-transmission time in milli-secondsrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.18 |
rcIpMplsRsvpRapidRetransIncrementRapid re-transmission incrementrw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.19 |
rcIpMplsRsvpRapidRetransLimitMaximum number of attempts to re-transmit messagerw INTEGER .1.3.6.1.4.1.2272.1.8.102.4.20 |
rcIpMplsRsvpReqResvConfFlagRequire RSVP ResvConf message on successful reservationsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.4.21 |
rcIpMplsRsvpPathRemoveFlagEnable Path_State_Removed flag using in ERROR_SPEC object
of PATH_ERR messagerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.4.22 |
rcIpMplsRsvpProtectDomainFlagProtection Domain supportrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.4.23 |
rcIpMplsRsvpPathTraceFlagenable PATH direction tracingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.4.24 |
rcIpMplsRsvpResvTraceFlagenable RESV direction tracingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.4.25 |
rcIpMplsRsvpTrafficControlTraceFlagenable traffic control tracingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.4.26 |
rcIpMplsRsvpSessionTraceFlagenable session management tracingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.4.27 |
rcIpMplsLdpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.102.5 |
rcIpMplsLdpAdminStatusIndicates qhetehr global LDP is enabled or disabled.rw EnableValue (RAPID-CITY) .1.3.6.1.4.1.2272.1.8.102.5.1 |
rcIpMplsLdpHoldTimeKeep alive time for LDP peers.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.5.2 |
rcIpMplsLdpHelloHoldTimeTime for receiving link hello messages from peer.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.5.3 |
rcIpMplsLdpHelloIntervalFrequency of sending hello messages to peer.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.5.4 |
rcIpMplsLdpMaxHopsMaximum number of LSP hops for setting up an LSP.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.5.5 |
rcIpMplsLdpPathVectorLimitMax hop count for loop detection.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.5.6 |
rcIpMplsLdpTgtHelloHoldTimeTime for receiving targetted link hello messages.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.5.7 |
rcIpMplsLdpLoopDetFlagFlag to set loop detection capability.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.5.8 |
rcIpMplsLdpLblMergeFlagNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.5.9 |
rcIpMplsLdpAuthFlagNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.5.10 |
rcIpMplsLdpInterfaceTableSizeSize of Mpls LDP Interface Tablero Integer32 .1.3.6.1.4.1.2272.1.8.102.6 |
rcIpMplsLdpInterfaceTableTable of configured Mpls LDP Interfaces. SEQUENCE OF RcIpMplsLdpInterfaceEntry .1.3.6.1.4.1.2272.1.8.102.7 |
rcIpMplsLdpInterfaceEntryAn entry of rcIpMpls LDP Interfaces In Table. RcIpMplsLdpInterfaceEntry .1.3.6.1.4.1.2272.1.8.102.7.1 |
rcIpMplsLdpInterfaceIndexInterface index for LDP interface.ro Integer32 .1.3.6.1.4.1.2272.1.8.102.7.1.1 |
rcIpMplsLdpInterfaceLay3AddrLayer 3 address of LDP interface.rw IpAddress .1.3.6.1.4.1.2272.1.8.102.7.1.2 |
rcIpMplsLdpInterfaceLay3MaskLayer3 mask for LDP interface.rw IpAddress .1.3.6.1.4.1.2272.1.8.102.7.1.3 |
rcIpMplsLdpInterfaceTargetHelloFlagFlag for enabling target hellos.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.7.1.4 |
rcIpMplsLdpInterfaceTargetResponseFlagFlag to enable target response messgaes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.7.1.5 |
rcIpMplsLdpInterfaceNonTtlLspFlagNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.7.1.6 |
rcIpMplsLdpInterfaceRowStatusRow status for the LDP interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.7.1.7 |
rcIpMplsRsvpInterfaceTableSizeSize of Mpls RSVP Interface Tablero Integer32 .1.3.6.1.4.1.2272.1.8.102.8 |
rcIpMplsRsvpInterfaceTableTable of configured Mpls RSVP Interfaces. SEQUENCE OF RcIpMplsRsvpInterfaceEntry .1.3.6.1.4.1.2272.1.8.102.9 |
rcIpMplsRsvpInterfaceEntryAn entry of rcIpMpls RSVP Interfaces In Table. RcIpMplsRsvpInterfaceEntry .1.3.6.1.4.1.2272.1.8.102.9.1 |
rcIpMplsRsvpInterfaceIndexIndex for RSVP interface table.ro Integer32 .1.3.6.1.4.1.2272.1.8.102.9.1.1 |
rcIpMplsRsvpInterfaceLay3AddrLayer 3 address for RSVP interface.rw IpAddress .1.3.6.1.4.1.2272.1.8.102.9.1.2 |
rcIpMplsRsvpInterfaceLay3MaskLayer 3 mask for RSVP interface.rw IpAddress .1.3.6.1.4.1.2272.1.8.102.9.1.3 |
rcIpMplsRsvpInterfaceAuthFlagNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.9.1.4 |
rcIpMplsRsvpInterfaceHelloFlagFlag to enable RSVP interface hello.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.9.1.5 |
rcIpMplsRsvpInterfaceRefreshReductionFlagNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.9.1.6 |
rcIpMplsRsvpInterfaceMemoryReductionFlagNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.9.1.7 |
rcIpMplsRsvpInterfaceReliableFlagNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.9.1.8 |
rcIpMplsRsvpInterfaceEPolicingFlagNot used in this release.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.9.1.9 |
rcIpMplsRsvpInterfaceRowStatusRow status for RSVP interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.9.1.10 |
rcIpMplsLdpTargetAddrTableSizeSize of Mpls LDP target address Tablero Integer32 .1.3.6.1.4.1.2272.1.8.102.10 |
rcIpMplsLdpTargetAddrTableTable of configured Mpls LDP target addresses. SEQUENCE OF RcIpMplsLdpTargetAddrEntry .1.3.6.1.4.1.2272.1.8.102.11 |
rcIpMplsLdpTargetAddrEntryAn entry of rcIpMpls LDP target addresses In Table. RcIpMplsLdpTargetAddrEntry .1.3.6.1.4.1.2272.1.8.102.11.1 |
rcIpMplsLdpTargetAddrBaseAddrThe LDP interface IP address for which target address should
be configuredrw IpAddress .1.3.6.1.4.1.2272.1.8.102.11.1.1 |
rcIpMplsLdpTargetAddrTgtAddrThe IP address configured to be the LDP target addressrw IpAddress .1.3.6.1.4.1.2272.1.8.102.11.1.2 |
rcIpMplsLdpTargetAddrRowStatusRow Status for LDP target address table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.11.1.3 |
rcIpMplsTunnelGroupTableTable of Tunnel Groups. SEQUENCE OF RcIpMplsTunnelGroupEntry .1.3.6.1.4.1.2272.1.8.102.12 |
rcIpMplsTunnelGroupEntryAn entry of rcIpMpls tunnel group In Table. RcIpMplsTunnelGroupEntry .1.3.6.1.4.1.2272.1.8.102.12.1 |
rcIpMplsTunnelGroupIdTunnel Group Identifierro INTEGER .1.3.6.1.4.1.2272.1.8.102.12.1.1 |
rcIpMplsTunnelGroupDestAddrGroup the tunnels with same destination IP address into the
tunnel grouprw IpAddress .1.3.6.1.4.1.2272.1.8.102.12.1.2 |
rcIpMplsTunnelGroupPrimaryTunnelList of primary tunnels contained in the tunnel group, diplayed
in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>]rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.12.1.3 |
rcIpMplsTunnelGroupActiveTunnelActive tunnel id in the Tunnel Groupro INTEGER .1.3.6.1.4.1.2272.1.8.102.12.1.4 |
rcIpMplsTunnelGroupPersistentFlagTunnel Group Persistent Flagrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.12.1.5 |
rcIpMplsTunnelGroupOperationAdd tunnel to the Tunnel Group or remove tunnel from the
tunnel grouprw Enumeration .1.3.6.1.4.1.2272.1.8.102.12.1.6 |
rcIpMplsTunnelGroupTunnelListList of Tunnels contained in the tunnel group, diplayed
in the format of <tunnelId>/<priority>[,<tunnelId>/<priority>], such as string
2,4,5 indicated the tunnel group contains tunnel 2, tunnel 4,
and tunnel 5rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.12.1.7 |
rcIpMplsTunnelGroupFtnListList of fecs bineded to the tunnel group, the display
format is same as rcIpMplsTunnelGroupTunnelListro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.12.1.8 |
rcIpMplsTunnelGroupBgpNeighborBGP neigbors associated with the tunnel groupro Integer32 .1.3.6.1.4.1.2272.1.8.102.12.1.9 |
rcIpMplsTunnelGroupRowStatusRow status for create/delete the tunnel group.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.12.1.10 |
rcIpMplsTunnelGroupBackupTunnelBackup tunnel id in the Tunnel Group displayed
in the format <tunnelId/priority>rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.12.1.11 |
rcIpMplsTeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.2272.1.8.102.13 |
rcIpMplsTeFloodThresholdStartFirst TE flooding threshold for significant bandwidth
change in percent.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.13.1 |
rcIpMplsTeFloodThresholdDeltaDelta TE flooding threshold for significant
Bandwidth change in percent. After start
threshold is hit every delta change in link
bandwidth results in flooding link's TE
information.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.13.2 |
rcIpMplsTeInterfaceTablercIpMplsInterface Traffic-Eng table. This table
contains rows which are traffic-eng configuration
parameters for the link. SEQUENCE OF RcIpMplsTeInterfaceEntry .1.3.6.1.4.1.2272.1.8.102.14 |
rcIpMplsTeInterfaceEntryAn entry of rcIpMplsInterface Te Table. RcIpMplsTeInterfaceEntry .1.3.6.1.4.1.2272.1.8.102.14.1 |
rcIpMplsTeInterfaceIndexInterface index for the IP interface.ro Integer32 .1.3.6.1.4.1.2272.1.8.102.14.1.1 |
rcIpMplsTeInterfaceLay3AddrLayer 3 address for the MPLS interface.ro IpAddress .1.3.6.1.4.1.2272.1.8.102.14.1.2 |
rcIpMplsTeInterfaceLay3MaskLayer 3 mask for the MPLS interface.ro IpAddress .1.3.6.1.4.1.2272.1.8.102.14.1.3 |
rcIpMplsTeInterfaceIgpTraffic-eng IGP protocol to use on link.rw Enumeration .1.3.6.1.4.1.2272.1.8.102.14.1.4 |
rcIpMplsTeInterfaceMetricTraffic-eng metric to assign to the link.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.14.1.5 |
rcIpMplsTeInterfaceMaxBandwidthMaximum bandwidth on the link in bits/sec in the
direction outwards from the local system.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.14.1.6 |
rcIpMplsTeInterfaceMaxReservableBandwidthMaximum reservable bandwidth on the link in bits/sec in
the direction outwards from the local system.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.14.1.7 |
rcIpMplsTeInterfaceResourceColorResource class/color which represents administrative group
membership for the link. The integer value represents the
format of a hexadecimal 32-bit mask. A link that is a member
of more than one administrative group will have multiple
mask bits set.rw OCTET STRING .1.3.6.1.4.1.2272.1.8.102.14.1.8 |
rcIpMplsTunnelTableTable of Tunnels with label record info . SEQUENCE OF RcIpMplsTunnelEntry .1.3.6.1.4.1.2272.1.8.102.15 |
rcIpMplsTunnelEntryAn entry of rcIpMpls tunnel In Table. RcIpMplsTunnelEntry .1.3.6.1.4.1.2272.1.8.102.15.1 |
rcIpMplsTunnelIdTunnel Identifierro INTEGER .1.3.6.1.4.1.2272.1.8.102.15.1.1 |
rcIpMplsTunnelLabelRecordFlagTunnel Identifierrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.15.1.2 |
rcIpMplsTunnelRowStatusCreation or deletion of rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.15.1.3 |
rcIpMplsTunnelExtTableThe mplsTunnelExtTable provides enterprise
extension options for a mplsTunnelEntry that has
be created for a MPLS tunnel. The mplsTunnelEntry
must be created apriori. SEQUENCE OF RcIpMplsTunnelExtEntry .1.3.6.1.4.1.2272.1.8.102.16 |
rcIpMplsTunnelExtEntryAn entry of rcIpMpls Tunnel Ext Table. RcIpMplsTunnelExtEntry .1.3.6.1.4.1.2272.1.8.102.16.1 |
rcIpMplsTunnelExtIndexUniquely identifies this row.
This an index object for the mplsTunnelExtTable entry that
in part also specifies the mpls tunnel entry with which this
tunnel extension entry is associated. The value of this
object should mimic the value of mplsTunnelIndex of the
MplsTunnelEntry of the mpls tunnel for which this extended
tunnel table entry row is to be applied.ro MplsTunnelIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.8.102.16.1.1 |
rcIpMplsTunnelExtInstanceUniquely identifies an instance of a tunnel's extended
entry. This an index object for the mplsTunnelExtTable entry
that
in part specifies the mpls tunnel with which this tunnel
extension entry is associated. Uniquely The value of this
object should be equal to the value of MplsTunnelInstance
of the MplsTunnelEntry of the mpls tunnel for which this
extended tunnel table row is to be applied.ro MplsTunnelInstanceIndex (MPLS-TC-STD-MIB) .1.3.6.1.4.1.2272.1.8.102.16.1.2 |
rcIpMplsTunnelExtEgressLSRIdThe purpose of this object is to uniquely identity a
tunnel within a network to which this extended tunnel
table entry should apply. This an index object for the
mplsTunnelExtTable entry that in part specifies the mpls
tunnel with which this tunnel extension entry is associated.
The value of this object should mimic the value of
mplsTunnelIngressLSRId of the MplsTunnelEntry of the mpls
tunnel for which this extended tunnel table row is to be
applied. Please reference mplsTunnelIngressLSRId for
additional information on it which is mimiced here.ro MplsLsrId .1.3.6.1.4.1.2272.1.8.102.16.1.3 |
rcIpMplsTunnelExtIngressLSRIdSpecifies the egress LSR id for which this extended tunnel
table entry should apply. This is an index object for the
mplsTunnelExtTable entry that in part specifies the mpls
tunnel with which this tunnel extension entry is associated.
The value of this object should mimic the value of
mplsTunnelEngressLSRId of the MplsTunnelEntry of the mpls
tunnel for which this extended tunnel table row is to be
applied.ro MplsLsrId .1.3.6.1.4.1.2272.1.8.102.16.1.4 |
rcIpMplsTunnelExtFrrTableIndexIndex into the mplsTunnelFrrTable entry that
specifies the frr path to use for the tunnel that implied
by the index objects of this row entry.
Specifying a frr path to use is optional.rw Unsigned32 .1.3.6.1.4.1.2272.1.8.102.16.1.5 |
rcIpMplsTunnelExtRowStatusThis variable is used to create, modify, and/or
delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.16.1.6 |
rcIpMplsTunnelFrrTableThe rcIpMplsTunnelFrrTable is used to indicate the
frr constraints for a frr detour LSP for a tunnel
specified as row entry in the mplsTunnelTable.The
frr constraints are established viasignaling, for
the outgoing direction of the tunnel. Each row in
this table is indexed by rcIpMplsTunnelFrrListIndex.
In this implementation it is intended that one row
entry may used as a frr template for multiple tunnels.
Conversely a row entry may be created for each tunnel,
or there may be a combination of both styles, one to one,
and one to many in the relationship between a row
entry of this table and tunnel(s). SEQUENCE OF RcIpMplsTunnelFrrEntry .1.3.6.1.4.1.2272.1.8.102.17 |
rcIpMplsTunnelFrrEntryAn entry in this table represents a tunnel frr path. An
entry is created by a network administrator for
signaled LSP with frr path set up by an MPLS signaling proto
col. RcIpMplsTunnelFrrEntry .1.3.6.1.4.1.2272.1.8.102.17.1 |
rcIpMplsTunnelFrrListIndexPrimary index into this table identifying a particular
row entry of frr detour LSP contraints.ro Unsigned32 .1.3.6.1.4.1.2272.1.8.102.17.1.1 |
rcIpMplsTunnelFrrSetupPrioSetup priority for frr detour LSP.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.17.1.2 |
rcIpMplsTunnelFrrHoldingPrioHolding priority for frr detour LSP.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.17.1.3 |
rcIpMplsTunnelFrrHopLimitMaximum number of hops a frr detour LSP is allowed
to traverse.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.17.1.4 |
rcIpMplsTunnelFrrBandwidthBandwidth estimate with which to set up the frr detour LSPs
in units of a million bits per second (Mbps).rw INTEGER .1.3.6.1.4.1.2272.1.8.102.17.1.5 |
rcIpMplsTunnelFrrProtectionTypeFrr backup or resource protection type to be used.rw Enumeration .1.3.6.1.4.1.2272.1.8.102.17.1.6 |
rcIpMplsTunnelFrrExclAnyAffinityExclude any link in detour LSP setup which is represented by
administratively defined attributes associated with the bit
pattern of this object. The value represents the format of
a hexadecimal 32-bit vector or mask.rw OCTET STRING .1.3.6.1.4.1.2272.1.8.102.17.1.7 |
rcIpMplsTunnelFrrInclAnyAffinityAllow detour LSP setup on any link which is represented by
administratively defined attributes associated with the bit
pattern of this object. The value represents the format of a
hexadecimal 32-bit vector or mask. A value of zero allows a
detour LSP to be setup on any link per the constraint of thi
s
object.rw OCTET STRING .1.3.6.1.4.1.2272.1.8.102.17.1.8 |
rcIpMplsTunnelFrrInclAllAffinityOnly allow detour LSP setup on links which contain at a
minimum the administratively defined attributes represented
by this bit pattern. The value represents the format of a
hexadecimal 32-bit vector or mask. A value of zero allows a
detour LSP to be setup on any link per the constraint of thi
s
object.rw OCTET STRING .1.3.6.1.4.1.2272.1.8.102.17.1.9 |
rcIpMplsTunnelFrrLegacyFlagFlag to control the format of the frr object used. When
set to true, the legacy format is used which is a
class type of 7. When set to false the frr format used
is for class type of 1.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.17.1.10 |
rcIpMplsTunnelFrrRowStatusThis variable is used to create, modify, and/or
delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.17.1.11 |
rcIpMplsTunnelHopToIpAddrMapTableThe rcIpMplsTunnelHopToIpAddrMapTable is used to maintain
mapping between Hop name and IP Address. SEQUENCE OF RcIpMplsTunnelHopToIpAddrEntry .1.3.6.1.4.1.2272.1.8.102.18 |
rcIpMplsTunnelHopToIpAddrMapEntryAn entry in this table represents a mapping between
Hop name and the IP Address. RcIpMplsTunnelHopToIpAddrEntry .1.3.6.1.4.1.2272.1.8.102.18.1 |
rcIpMplsTunnelHopToIpAddrMapHopNamePrimary index into this table identifying a hop name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.18.1.1 |
rcIpMplsTunnelHopToIpAddrMapIPAddrTable column, identifying an IP Address.rw IpAddress .1.3.6.1.4.1.2272.1.8.102.18.1.2 |
rcIpMplsTunnelHopToIpAddrMapIPAddrPrefixLenTable column identifying IP Address prefix length.rw INTEGER .1.3.6.1.4.1.2272.1.8.102.18.1.3 |
rcIpMplsTunnelHopToIpAddrMapRowStatusRow status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.18.1.4 |
rcIpMplsLspTableTable of originated, terminated and transit operational LSPs
with all cross connect information SEQUENCE OF RcIpMplsLspEntry .1.3.6.1.4.1.2272.1.8.102.19 |
rcIpMplsLspEntryAn entry of rcIpMpls Lsp in Table. RcIpMplsLspEntry .1.3.6.1.4.1.2272.1.8.102.19.1 |
rcIpMplsLspTunnelIndexTunnel Index INTEGER .1.3.6.1.4.1.2272.1.8.102.19.1.1 |
rcIpMplsLspIdLSP ID INTEGER .1.3.6.1.4.1.2272.1.8.102.19.1.2 |
rcIpMplsLspIngressLsrIdSpecifies the Ingress LSR Id MplsLsrId .1.3.6.1.4.1.2272.1.8.102.19.1.3 |
rcIpMplsLspEgressLsrIdSpecifies the Egress LSR Id MplsLsrId .1.3.6.1.4.1.2272.1.8.102.19.1.4 |
rcIpMplsLspNameLSP Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.19.1.5 |
rcIpMplsLspTypeThis value signifies the role that this tunnel
entry/instance represents. This value MUST be set
to head(1) at the originating point of the tunnel.
This value MUST be set to transit(2) at transit
points along the tunnel, if transit points are
supported. This value MUST be set to tail(3) at the
terminating point of the tunnel if tunnel tails are
supported.ro Enumeration .1.3.6.1.4.1.2272.1.8.102.19.1.6 |
rcIpMplsLspDetourThe tunnel is a detour tunnel or notro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2272.1.8.102.19.1.7 |
rcIpMplsLspIncomingInterfaceLSR-assigned ifIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.8.102.19.1.8 |
rcIpMplsLspIncomingLabelIncoming Label valuero Integer32 .1.3.6.1.4.1.2272.1.8.102.19.1.9 |
rcIpMplsLspOutgoingInterfaceLSR-assigned ifIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2272.1.8.102.19.1.10 |
rcIpMplsLspOutgoingLabelOutgoing Label valuero Integer32 .1.3.6.1.4.1.2272.1.8.102.19.1.11 |