HM2-PLATFORM-MSRP-MIB
AI MIB Summary
The HM2-PLATFORM-MSRP-MIB module provides management and monitoring capabilities for Hirschmann Private Platform2 switches to configure and track IEEE 802.1Qat (Stream Reservation Protocol) and 802.1Qav (Traffic Shaping) parameters. It exposes specific metrics for stream reservation states, bandwidth allocation, and traffic shaping policies required for deterministic low-latency network operations.
The Hirschmann Private Platform2 MIB for 802.1Qat, 802.1Qav Configuration. Copyright (C) 2013. All Rights Reserved.
Main OID:
hm2PlatformMSRP.1.3.6.1.4.1.248.12.60.2.3
71
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
hm2PlatformMSRPThe Hirschmann Private Platform2 MIB for 802.1Qat, 802.1Qav Configuration.
Copyright (C) 2013. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.12.60.2.3 |
hm2AgentDot1qMsrp OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2.3.1 |
hm2AgentDot1qPortMsrpTableA table of MSRP control information about every bridge
port. This is indexed by hm2AgentDot1qMsrpPort. SEQUENCE OF Hm2AgentDot1qPortMsrpEntry .1.3.6.1.4.1.248.12.60.2.3.1.1 |
hm2AgentDot1qPortMsrpEntryMSRP control information for a bridge port. Hm2AgentDot1qPortMsrpEntry .1.3.6.1.4.1.248.12.60.2.3.1.1.1 |
hm2AgentDot1qMsrpPortThe MSRP port number. Integer32 .1.3.6.1.4.1.248.12.60.2.3.1.1.1.1 |
hm2AgentDot1qPortMsrpEnabledStatusThe administrative state of MSRP operation on this port. The
value true(1) indicates that MSRP is enabled on this port
in all VLANs as long as hm2AgentDot1qBridgeMsrpEnabledStatus is
also true(1). A value of false(2) indicates that MSRP is
disabled on this port in all VLANs: any MSRP frames received
will be silently discarded, and no MSRP registrations will be
propagated from other ports. Setting this to a value of
true(1) will be stored by the agent but will only take
effect on the MSRP protocol operation if
hm2AgentDot1qBridgeMsrpEnabledStatus
also indicates the value true(1). This object affects
all MSRP Applicant and Registrar state machines on this
port. A transition from false(2) to true(1) will
cause a reset of all MSRP state machines on this port.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.60.2.3.1.1.1.2 |
hm2AgentDot1qPortMsrpFailedRegistrationsThe total number of failed MSRP registrations, for any
reason, in all VLANs, on this port.
Discontinuities in the value of the counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
object of the associated interface (if any).ro Counter64 UNITS "failed MSRP registrations" .1.3.6.1.4.1.248.12.60.2.3.1.1.1.3 |
hm2AgentDot1qPortMsrpLastPduOriginThe Source MAC Address of the last MSRP message
received on this port.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.12.60.2.3.1.1.1.4 |
hm2AgentDot1qPortMsrpPvidThe default VLAN ID that Streams are assigned to.
Talkers learn this VID from the SRP Domain attribute
and tag Streams accordingly.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.248.12.60.2.3.1.1.1.5 |
hm2AgentDot1qBridgeMsrpEnabledStatusThe administrative status requested by management for
MSRP. The value true(1) indicates that MSRP should
be enabled on this device, in all VLANs, on all ports
for which it has not been specifically disabled. When
false(2), MSRP is disabled, in all VLANs and on all
ports, and all MSRP frames will be forwarded
transparently. This objects affects both Applicant and
Registrar state machines. A transition from false(2)
to true(1) will cause a reset of all MSRP state
machines on all ports.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.60.2.3.1.2 |
hm2AgentDot1qBridgeMsrpTalkerPruningThe value of the talkerPruning parameter which
controls the propagation of Talker declarations.
The value true(1) indicates that Talker attributes
are only declared on ports that have the Stream
destination_address registered in the MMRP MAC
Address Registration Entries. When false(2),
Talker attribute are declared on all egress ports
in the active topology.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.60.2.3.1.3 |
hm2AgentDot1qBridgeMsrpMaxFanInPortsThe value of the msrpMaxFanInPorts parameter which
limits the total number of ports on a Bridge that
are allowed to establish reservations for inbound
Streams. A value of zero (0) indicates no fan-in
limit is being specified and calculations involving
fan-in will only be limited by the number of MSRP
enabled ports.
The value of this object MUST be retained across
reinitializations of the management system.rw Unsigned32 .1.3.6.1.4.1.248.12.60.2.3.1.4 |
hm2AgentDot1qBridgeMsrpBoundaryPropagateThe value of the boundaryPropagate parameter which
controls the propagation of Talker declarations.
The value true(1) indicates that Talker attributes
are propagated to the ports marked as boundary port.
When false(2) Talker attributes are not propagated
to the ports marked as boundary port.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.60.2.3.1.6 |
hm2AgentDot1qMsrpStreamTableA table of detailed MSRP stream information.
This is indexed by Stream ID. SEQUENCE OF Hm2AgentDot1qMsrpStreamEntry .1.3.6.1.4.1.248.12.60.2.3.1.7 |
hm2AgentDot1qMsrpStreamEntryA list of objects containing characteristics
for each registered Stream. Rows in the table are
automatically created for Streams registered on any
port of a bridge Hm2AgentDot1qMsrpStreamEntry .1.3.6.1.4.1.248.12.60.2.3.1.7.1 |
hm2AgentDot1qMsrpStreamIndexAn index for MSRP Details Table. Integer32 .1.3.6.1.4.1.248.12.60.2.3.1.7.1.1 |
hm2AgentDot1qMsrpStreamIDThe Stream ID associated with the row of the table.
Rows in the table are automatically created when
Streams are registered via MSRP.ro Hm2AgentDot1qMsrpStreamIdValue .1.3.6.1.4.1.248.12.60.2.3.1.7.1.2 |
hm2AgentDot1qMsrpStreamDestMacAddrThe MAC destination address for the Stream described
by this reservation.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.12.60.2.3.1.7.1.3 |
hm2AgentDot1qMsrpStreamVlanIdThe VLAN ID associated with the MSRP registration
for this Stream.ro Integer32 .1.3.6.1.4.1.248.12.60.2.3.1.7.1.4 |
hm2AgentDot1qMsrpStreamTspecMaxFrameSizeThe maximum size frame that will be sent by
a Talker for this Stream. This value is part
of the Traffic Specification for the Stream.ro Unsigned32 .1.3.6.1.4.1.248.12.60.2.3.1.7.1.5 |
hm2AgentDot1qMsrpStreamTspecMaxIntervalFramesThe maximum number of frame that will be sent
during a class measurement interval. This
value is part of the Traffic Specification for
the Stream.ro Unsigned32 .1.3.6.1.4.1.248.12.60.2.3.1.7.1.6 |
hm2AgentDot1qMsrpStreamDataFramePriorityThe 802.1Q user priority value that the
referenced Stream will be tagged with. This value
is used to distinguish Class A and Class B traffic.ro Hm2AgentDot1qPriorityValue .1.3.6.1.4.1.248.12.60.2.3.1.7.1.7 |
hm2AgentDot1qMsrpStreamRankSRP supports emergency and non-emergency.
Emergency traffic will interrupt non-emergency
traffic if there is insufficient bandwidth or
resources available for the emergency traffic.ro Hm2AgentDot1qMsrpStreamRankValue .1.3.6.1.4.1.248.12.60.2.3.1.7.1.8 |
hm2AgentDot1qMsrpReservationTableA table containing Stream attribute
registrations per port. SEQUENCE OF Hm2AgentDot1qMsrpReservationEntry .1.3.6.1.4.1.248.12.60.2.3.1.8 |
hm2AgentDot1qMsrpReservationEntryA list of objects containing Stream attribute
registrations per port. Rows in the table are
automatically created for Streams registered on any
port of a bridge. Hm2AgentDot1qMsrpReservationEntry .1.3.6.1.4.1.248.12.60.2.3.1.8.1 |
hm2AgentDot1qMsrpReservationStreamIdThe Stream ID associated with the row of the table.
Rows in the table are automatically created when
Streams are registered via MSRP. Hm2AgentDot1qMsrpStreamIdValue .1.3.6.1.4.1.248.12.60.2.3.1.8.1.1 |
hm2AgentDot1qMsrpReservationDirectionThe source of this Stream registration, either
Talker or Listener. Hm2AgentDot1qMsrpReservationDirectionValue .1.3.6.1.4.1.248.12.60.2.3.1.8.1.2 |
hm2AgentDot1qMsrpReservationDeclarationTypeThe type of Talker or Listener registration.ro Hm2AgentDot1qMsrpReservationDeclarationTypeValue .1.3.6.1.4.1.248.12.60.2.3.1.8.1.3 |
hm2AgentDot1qMsrpReservationAccumulatedLatencyThe Accumulated Latency associated with the current
registration.
For Talker registrations this represents the accumulated
latency from the Talker to the ingress port of this
Bridge.
For Listener registrations this represents the accumulated
latency to the ingress port of the neighbor Bridge or
end stations. This include the latency of the media
attached to this egress port.ro Unsigned32 UNITS "nano-seconds" .1.3.6.1.4.1.248.12.60.2.3.1.8.1.4 |
hm2AgentDot1qMsrpReservationFailureBridgeIdThe first Bridge that changes a Talker Advertise to a
Talker Failed registration will report its Bridge
Identification in this field. That single Bridge
Identification is then propagated from Bridge to Bridge.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.248.12.60.2.3.1.8.1.5 |
hm2AgentDot1qMsrpReservationFailureCodeThe first Bridge that changes a Talker Advertise to a
Talker Failed registration will report the Failure Code
in this field. That single Failure Code is then propagated
from Bridge to Bridge.ro Hm2AgentDot1qMsrpReservationFailureCodeValue .1.3.6.1.4.1.248.12.60.2.3.1.8.1.6 |
hm2AgentDot1qMsrpReservationDroppedStreamFramesA count of the number of data stream frames that have
been dropped for whatever reason. These are not MSRP
frames, but the stream data frames that are carried by
the MSRP Reservation.
Discontinuities in the value of the counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of ifCounterDiscontinuityTime
object of the associated interface (if any).ro Counter64 UNITS "frames" .1.3.6.1.4.1.248.12.60.2.3.1.8.1.7 |
hm2AgentDot1qMsrpReservationStreamAgeThe number of seconds since the reservation was established
on this port. Talkers shall report this as the seconds
since the first receipt of the Talker Advertise or Talker
Failed. Listeners shall report this as the number of
seconds since the destination_address was first added to
the Dynamic Reservations Entries.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.248.12.60.2.3.1.8.1.8 |
hm2AgentDot1qMrpMsrpStats OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2.3.2 |
hm2AgentDot1qMrpMsrpPktTxThe number of frames was transmitted.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.1 |
hm2AgentDot1qMrpMsrpPktRxThe number of frames was received.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.2 |
hm2AgentDot1qMrpMsrpPktRxBadHeaderThe number of frames with bad header was received.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.3 |
hm2AgentDot1qMrpMsrpPktRxBadFormatThe number of frames with bad data field was received.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.4 |
hm2AgentDot1qMrpMsrpPktTxFailureThe number of frames was not transmitted.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.5 |
hm2AgentDot1qMrpMsrpStatsTableA table which contains MSRP statistics per port. SEQUENCE OF Hm2AgentDot1qMrpMsrpStatsEntry .1.3.6.1.4.1.248.12.60.2.3.2.6 |
hm2AgentDot1qMrpMsrpStatsEntryMSRP statistics entry. Hm2AgentDot1qMrpMsrpStatsEntry .1.3.6.1.4.1.248.12.60.2.3.2.6.1 |
hm2AgentDot1qMrpMsrpIntfIndex of hm2AgentDot1qMrpMsrpStatistics table. Integer32 .1.3.6.1.4.1.248.12.60.2.3.2.6.1.1 |
hm2AgentDot1qMrpMsrpPortPktTxThe number of frames was transmitted on interface.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.6.1.2 |
hm2AgentDot1qMrpMsrpPortPktRxThe number of frames was received on interface.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.6.1.3 |
hm2AgentDot1qMrpMsrpPortPktRxBadHeaderThe number of frames with bad header was received on interface.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.6.1.4 |
hm2AgentDot1qMrpMsrpPortPktRxBadFormatThe number of frames with bad data field was received on interface.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.6.1.5 |
hm2AgentDot1qMrpMsrpPortPktTxFailureThe number of frames was not transmitted on interface.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.6.1.6 |
hm2AgentDot1qMrpMsrpPortPktRegFailureThe number of failed registration attempts on interface.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.6.1.7 |
hm2AgentDot1qMrpMsrpPktMessageFailureThe number of failures while adding message into MSRP queue.ro Counter32 .1.3.6.1.4.1.248.12.60.2.3.2.7 |
hm2AgentDot1qFqtss OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2.3.3 |
hm2AgentDot1qFqtssNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2.3.3.0 |
hm2AgentDot1qFqtssObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2.3.3.1 |
hm2AgentDot1qFqtssConformance OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2.3.3.2 |
hm2AgentDot1qFqtssBap OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2.3.3.3 |
hm2AgentDot1qFqtssBapTableA table containing a set of bandwidth availability
parameters for each traffic class that supports the
credit-based shaper algorithm.
All writable objects in this table must be
persistent over power up restart/reboot. SEQUENCE OF Hm2AgentDot1qFqtssBapEntry .1.3.6.1.4.1.248.12.60.2.3.3.3.1 |
hm2AgentDot1qFqtssBapEntryA list of objects containing bandwidth allocation
information for each traffic class that supports the
credit-based shaper algorithm. Rows in the table are
automatically created and deleted as a result of the
operation of the algorithm described in 34.5. Hm2AgentDot1qFqtssBapEntry .1.3.6.1.4.1.248.12.60.2.3.3.3.1.1 |
hm2AgentDot1qFqtssTrafficClassThe traffic class number associated with the row of
the table.
A row in this table is created for each traffic class
that supports the credit-based shaper algrithm and whose
bandwidth can be reserved for AV traffic. Hm2AgentDot1qFqtssTrafficClassValue .1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.1 |
hm2AgentDot1qFqtssDeltaBandwidthThe value of the deltaBandwidth parameter
for the traffic class.
This value is represented as a fixed point number
scaled by a factor of 1,000,000; i.e., 100,000,000
(the maximum value) represents 100%.
The default value of the deltaBandwidth parameter
for the highest numbered traffic class that supports
the credit-based shaper algorithm is 75%; for all
lower numbered traffic classes that support the
credit-based shaper algorithm the default value is 0%.
The value of this object MUST be retained across
reinitializations of the management system.rw Hm2AgentDot1qFqtssDeltaBandwidthValue UNITS "percent" .1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.2 |
hm2AgentDot1qFqtssOperIdleSlopeMsThe most significant 32 bits of the bandwidth,
in bits per second, that is currently allocated to the
traffic class (idleSlope(N)). This object MUST be read
at the same time as hm2AgentDot1qFqtssOperIdleSlopeLs,
which represents the LS 32 bits of the value, in order
for the read operation to succeed.
If SRP is supported and in operation, then the reserved
bandwidth is determined by the operation of SRP; otherwise,
the value of hm2AgentDot1qFqtssOperIdleSlopeMs is equal to
the value of hm2AgentDot1qFqtssAdminIdleSlopeMs.
The value of this object MUST be retained across
reinitializations of the management system.ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.3 |
hm2AgentDot1qFqtssOperIdleSlopeLsThe least significant 32 bits of the bandwidth,
in bits per second, that is currently allocated to the
traffic class (idleSlope(N)). This object MUST be read
at the same time as hm2AgentDot1qFqtssOperIdleSlopeMs,
which represents the LS 32 bits of the value, in order
for the read operation to succeed.
If SRP is supported and in operation, then the reserved
bandwidth is determined by the operation of SRP; otherwise,
the value of hm2AgentDot1qFqtssOperIdleSlopeLs is equal to
the value of hm2AgentDot1qFqtssAdminIdleSlopeLs..
The value of this object MUST be retained across
reinitializations of the management system.ro Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.4 |
hm2AgentDot1qFqtssAdminIdleSlopeMsThe most significant 32 bits of the bandwidth,
in bits per second, that the manager desires to allocate
to the traffic class as idleSlope(N). This object MUST be
read or written at the same time as
hm2AgentDot1qFqtssAdminIdleSlopeLs,
which represents the LS 32 bits of the value, in order
for the read or write operation to succeed.
If SRP is supported and in operation, then the reserved
bandwidth is determined by the operation of SRP, and any
changes to the value of this object have no effect on the
operational value of idleSlope(N).
The value of this object MUST be retained across
reinitializations of the management system.rw Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.5 |
hm2AgentDot1qFqtssAdminIdleSlopeLsThe least significant 32 bits of the bandwidth,
in bits per second, that the manager desires to allocate
to the traffic class as idleSlope(N). This object MUST be
read or written at the same time as
hm2AgentDot1qFqtssAdminIdleSlopeMs,
which represents the LS 32 bits of the value, in order
for the read or write operation to succeed.
If SRP is supported and in operation, then the reserved
bandwidth is determined by the operation of SRP, and any
changes to the value of this object have no effect on the
operational value of idleSlope(N).
The value of this object MUST be retained across
reinitializations of the management system.rw Unsigned32 UNITS "bits per second" .1.3.6.1.4.1.248.12.60.2.3.3.3.1.1.6 |
hm2AgentDot1qFqtssMappings OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2.3.3.4 |
hm2AgentDot1qFqtssTxSelectionAlgorithmTableA table containing the assignment of transmission
selection algorithms to traffic classes for the Port.
This table provides management of the Transmission
Selection Algorithm Table defined in 8.6.8.
For a given Port, a row in the table exists for each
traffic class that is supported by the Port.
The default assignments of transmission selection
algorithms to traffic classes in the table are made
on instantiation of the table, in accordance
with the defaults defined in 8.6.8 and 34.5.
All writable objects in this table must be
persistent over power up restart/reboot. SEQUENCE OF Hm2AgentDot1qFqtssTxSelectionAlgorithmEntry .1.3.6.1.4.1.248.12.60.2.3.3.4.1 |
hm2AgentDot1qFqtssTxSelectionAlgorithmEntryA list of objects that contain the mapping of a
traffic class value to a transmission selection algorithm
value. Hm2AgentDot1qFqtssTxSelectionAlgorithmEntry .1.3.6.1.4.1.248.12.60.2.3.3.4.1.1 |
hm2AgentDot1qFqtssTxSelectionAlgorithmIDThe identifier of the transmission selection algorithm
assigned to the traffic class.
The value of this object MUST be retained across
reinitializations of the management system.rw Hm2AgentDot1qFtqssTxSelectionAlgorithmIDValue .1.3.6.1.4.1.248.12.60.2.3.3.4.1.1.1 |
hm2AgentDot1qFqtssSrpRegenOverrideTableA table containing the set of priority regeneration
table override values for the Port.
The recommended default values of priorities
associated with SR classes, and the corresponding
override values, are defined in 6.9.4.
All writable objects in this table must be
persistent over power up restart/reboot. SEQUENCE OF Hm2AgentDot1qFqtssSrpRegenOverrideEntry .1.3.6.1.4.1.248.12.60.2.3.3.4.2 |
hm2AgentDot1qFqtssSrpRegenOverrideEntryA list of objects that contain the mapping of a
priority value to a priority regeneration override
value, and a boundary port indication.
Rows in the table exist for all priorities that are
associated with SR classes. Hm2AgentDot1qFqtssSrpRegenOverrideEntry .1.3.6.1.4.1.248.12.60.2.3.3.4.2.1 |
hm2AgentDot1qFqtssSrClassPriorityThe priority value that is overridden at the
SRP domain boundary.rw Hm2AgentDot1qPriorityValue .1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.1 |
hm2AgentDot1qFqtssPriorityRegenOverrideThe priority value that is used to override the
priority regeneration table entry at the SRP
domain boundary.
The value of this object MUST be retained across
reinitializations of the management system.rw Hm2AgentDot1qPriorityValue .1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.2 |
hm2AgentDot1qFqtssSrpBoundaryPortThe value of the SRPdomainBoundaryPort parameter
(6.6.4) for the priority.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.60.2.3.3.4.2.1.3 |