HM2-PLATFORM-MRP-MIB
The HM2-PLATFORM-MRP-MIB provides management access to Hirschmann Private Platform2 industrial switches for configuring and monitoring IEEE 802.1Q Multiple Registration Protocol (MRP) parameters, including registration states, port memberships, and redundancy group statuses. This module enables the verification of MRP session health and the enforcement of ring topology redundancy policies within Layer 2 switched networks.
Imported Objects
Objects
9 total| Object Name |
|---|
hm2PlatformMRPThe Hirschmann Private Platform2 MIB for 802.1Q MRP Configuration. Copyright (C) 2013. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.12.60 |
hm2AgentDot1qMrp OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.1 |
hm2AgentDot1qPortMrpTableA table of MRP control information about every bridge port. This is indexed by hm2AgentDot1qMrpPort. SEQUENCE OF Hm2AgentDot1qPortMrpEntry .1.3.6.1.4.1.248.12.60.1.1 |
hm2AgentDot1qPortMrpEntryMRP control information for a bridge port. Hm2AgentDot1qPortMrpEntry .1.3.6.1.4.1.248.12.60.1.1.1 |
hm2AgentDot1qMrpPortThe MRP port number. Integer32 .1.3.6.1.4.1.248.12.60.1.1.1.1 |
hm2AgentDot1qPortMrpJoinTimeThe MRP Join time(10..100), in centiseconds.rw TimeInterval .1.3.6.1.4.1.248.12.60.1.1.1.2 |
hm2AgentDot1qPortMrpLeaveTimeThe MRP Leave time(20..600), in centiseconds.rw TimeInterval .1.3.6.1.4.1.248.12.60.1.1.1.3 |
hm2AgentDot1qPortMrpLeaveAllTimeThe MRP LeaveAll time(200..6000), in centiseconds.rw TimeInterval .1.3.6.1.4.1.248.12.60.1.1.1.4 |
hm2AgentDot1qMrpMxrp OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.60.2 |
More MIBs from Hirschmann
Browse all HirschmannMIBs →SNMP MIB module
HM2-PLATFORM-SWITCHING-MIB provides programmatic access to Layer 2 switching parameters and operational statistics for Hirschmann (Belden) Private Platform2 network switches. This module enables the monitoring of standard bridging metrics, including MAC address table entries, port state transitions, spanning tree protocol (STP) topology changes, and interface error counters.
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The HIRSCHMANN-MMP4-BASICL2-MIB module provides SNMP management definitions for monitoring Layer 2 switching functions, including port status, MAC address tables, and VLAN configurations, on Hirschmann (Belden) Platform4 series network devices.
The HM2-DIAGNOSTIC-MIB facilitates the monitoring of internal hardware health and fault conditions on Hirschmann (Belden) network switches, specifically exposing diagnostic data such as temperature sensors, voltage levels, fan status, and power supply integrity via SNMP.
HM2-DEVMGMT-MIB facilitates the monitoring and management of Hirschmann (Belden) network devices by exposing standard system-level metrics such as device status, interface states, and hardware health parameters via SNMP. This module enables centralized administration of device configuration, fault detection, and performance data collection for industrial Ethernet infrastructure.