HM2-PLATFORM-ROUTING-MIB
AI MIB Summary
The HM2-PLATFORM-ROUTING-MIB provides management interfaces for Hirschmann Platform2 Layer 3 switches to monitor and configure dynamic routing protocols, including BGP, OSPF, and IS-IS, alongside static route tables and interface routing states.
The Hirschmann Platform2 MIB for Layer3 Switching. Copyright (C) 2011. All Rights Reserved.
Main OID:
hm2PlatformRouting.1.3.6.1.4.1.248.12.2
411
Objects
Active
Status
11
Dependencies
Imported Objects
Objects
411 total| Object Name |
|---|
hm2PlatformRoutingThe Hirschmann Platform2 MIB for Layer3 Switching.
Copyright (C) 2011. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.12.2 |
hm2AgentSwitchArpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.1 |
hm2AgentSwitchArpAgeoutTimeHiOS: Configures the exact ARP entry age-out time in seconds.
HiSecOS: Configures the average ARP entry age-out time in seconds, with each
entry aging out after a random time between 0.5*hm2AgentSwitchArpAgeoutTime
and 1.5*hm2AgentSwitchArpAgeoutTime.rw Integer32 .1.3.6.1.4.1.248.12.2.1.1 |
hm2AgentSwitchArpResponseTimeConfigures the ARP request response timeout in seconds.
Allowable range: 1-10rw Integer32 .1.3.6.1.4.1.248.12.2.1.2 |
hm2AgentSwitchArpMaxRetriesConfigures the ARP count of maximum request for retries.
Allowable range: 0-10rw Integer32 .1.3.6.1.4.1.248.12.2.1.3 |
hm2AgentSwitchArpCacheSizeConfigures the ARP maximum number of entries in the cache.
Allowable range is platform specific.rw Integer32 .1.3.6.1.4.1.248.12.2.1.4 |
hm2AgentSwitchArpDynamicRenewThis indicates the current setting of ARP dynamic renew mode.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.1.5 |
hm2AgentSwitchArpTotalEntryCountCurrentCurrent number of entries in the ARP cache.ro Gauge32 .1.3.6.1.4.1.248.12.2.1.6 |
hm2AgentSwitchArpTotalEntryCountPeakPeak number of entries recorded in the ARP cache over
time. This value is restarted whenever the ARP cache
size is changed.ro Gauge32 .1.3.6.1.4.1.248.12.2.1.7 |
hm2AgentSwitchArpStaticEntryCountCurrentCurrent number of configured static ARP entries.ro Gauge32 .1.3.6.1.4.1.248.12.2.1.8 |
hm2AgentSwitchArpStaticEntryCountMaxMaximum number of configurable static ARP entries.ro Integer32 .1.3.6.1.4.1.248.12.2.1.9 |
hm2AgentSwitchLocalProxyArpTableThis table contains the per-interface configuration
parameters for local proxy ARP. SEQUENCE OF Hm2AgentSwitchLocalProxyArpEntry .1.3.6.1.4.1.248.12.2.1.11 |
hm2AgentSwitchLocalProxyArpEntryRepresents a logical row in the
hm2AgentSwitchLocalProxyArpTable. Hm2AgentSwitchLocalProxyArpEntry .1.3.6.1.4.1.248.12.2.1.11.1 |
hm2AgentSwitchLocalProxyArpModeThe local proxy ARP mode for the interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.1.11.1.1 |
hm2AgentSwitchIntfArpTableThis table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information. SEQUENCE OF Hm2AgentSwitchIntfArpEntry .1.3.6.1.4.1.248.12.2.1.12 |
hm2AgentSwitchIntfArpEntryThis table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information. Hm2AgentSwitchIntfArpEntry .1.3.6.1.4.1.248.12.2.1.12.1 |
hm2AgentSwitchIntfArpIpAddressThe Type of Address assigned to this interface. IpAddress .1.3.6.1.4.1.248.12.2.1.12.1.1 |
hm2AgentSwitchIntfArpIfIndexThe Associated IfIndex which identified the ARP Entry.
This value must be specified for static ARP entries on an
unnumbered interface InterfaceIndex (IF-MIB) .1.3.6.1.4.1.248.12.2.1.12.1.2 |
hm2AgentSwitchIntfArpAgeThis defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.248.12.2.1.12.1.3 |
hm2AgentSwitchIntfArpMacAddressThe hardware MAX Address that each interface maps to.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.1.12.1.4 |
hm2AgentSwitchIntfArpTypeThe type of ARP entry.ro Enumeration .1.3.6.1.4.1.248.12.2.1.12.1.5 |
hm2AgentSwitchIntfArpStatusThe status of this ARP entry. Setting this object destroy will remove the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.1.12.1.6 |
hm2AgentSwitchArpSparseLearnThis indicates the current setting of ARP sparse learn mode.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.1.100 |
hm2AgentSwitchArpCacheClearSetting the object to 'flushARP' will flush the ARP cache.
Setting the object to 'flushARPWithGateway' will also flush
the ARP cache but includes the ARP entries that are used by
gateways of routes.
Reading the object always returns 'other'.rw Enumeration .1.3.6.1.4.1.248.12.2.1.101 |
hm2AgentSwitchProxyArpMaxResponseDelayConfigures the maximum time in ms to wait before a proxy
response is sent. Setting this to 0 determines a response
to be sent immediately.rw Integer32 (0|1..1000) UNITS "milli-seconds" .1.3.6.1.4.1.248.12.2.1.248 |
hm2AgentSwitchIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.2 |
hm2AgentSwitchIpRoutingModeAdministratively enables/disables routing on the switch.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.1 |
hm2AgentSwitchIpDefaultGatewaySpecifies the default gateway manually configured.rw IpAddress .1.3.6.1.4.1.248.12.2.2.2 |
hm2AgentSwitchIpInterfaceTableIP interface table. SEQUENCE OF Hm2AgentSwitchIpInterfaceEntry .1.3.6.1.4.1.248.12.2.2.3 |
hm2AgentSwitchIpInterfaceEntryIP interface entry. Hm2AgentSwitchIpInterfaceEntry .1.3.6.1.4.1.248.12.2.2.3.1 |
hm2AgentSwitchIpInterfaceIfIndexThe IfIndex associated with this instance.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.248.12.2.2.3.1.1 |
hm2AgentSwitchIPAddressConfigMethodThe source of the IP address. User can set the object to none(0) or dhcp(2).
Option dhcp(2) enables DHCP client on the interface.
Option none(0) disables DHCP client on the interface.
Get on this object returns manual(1) only when the interface has a manually configured address.rw Enumeration .1.3.6.1.4.1.248.12.2.2.3.1.2 |
hm2AgentSwitchIpInterfaceIpAddressThe IP address assigned to this interface. When setting this value,
the value of hm2AgentSwitchIpInterfaceNetMask must be set at the same time.rw IpAddress .1.3.6.1.4.1.248.12.2.2.3.1.3 |
hm2AgentSwitchIpInterfaceNetMaskThe netmask assigned to this interface. When setting this value, the
value of hm2AgentSwitchIpInterfaceIpAddress must be set at the same time.rw IpAddress .1.3.6.1.4.1.248.12.2.2.3.1.4 |
hm2AgentSwitchIpInterfaceClearIpWhen setting this object to 'enable(1)' the interfaces IP address and netmask will
be set back to 0.0.0.0. Reading this object always returns 'disable(2).rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.3.1.5 |
hm2AgentSwitchIpInterfaceRoutingModeEnables or disables routing for this interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.3.1.6 |
hm2AgentSwitchIpInterfaceProxyARPModeEnables or disables proxy ARP for this interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.3.1.7 |
hm2AgentSwitchIpInterfaceMtuValueConfigures the MTU value for this interface. The applicable range is
68 to the <interface MTU value - 18>, in bytes. Get of this object
returns the effective MTU value on the interface. Set of this object
with a value of 0 resets the MTU to the default IP MTU value on the
interface. If a packet is received where the size exceeds the mtu
value, an icmp destination unreachable message is sent back to the
sender with the current mtu.rw Unsigned32 (0 | 68..12266) .1.3.6.1.4.1.248.12.2.2.3.1.8 |
hm2AgentSwitchIpInterfaceBandwidthConfigures the bandwidth value for this interface. If the returned value is 0,
bandwidth for this interface is not configured.rw Unsigned32 .1.3.6.1.4.1.248.12.2.2.3.1.9 |
hm2AgentSwitchIpInterfaceUnnumberedIfIndexIf this object is non-zero, it indicates that the interface is unnumbered
and specifies which interface the address is borrowed from.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.12.2.2.3.1.10 |
hm2AgentSwitchIpInterfaceIcmpUnreachablesIf this object is enabled, it indicates that ICMP unreachables can be sent on this
interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.3.1.11 |
hm2AgentSwitchIpInterfaceIcmpRedirectsIf this object is enabled and hm2AgentSwitchIpIcmpRedirectsMode is also enabled, ICMP redirects
can be sent on this interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.3.1.12 |
hm2AgentSwitchDhcpOperationRenew or release the IP address learned through DHCP.
Get on this object always gives none. None means no operation is performed on DHCP.rw Enumeration .1.3.6.1.4.1.248.12.2.2.3.1.13 |
hm2AgentSwitchIpInterfaceSuppressedThis mib variable contains the following values, which has the meaning as:
'unsuppressed' - The interface is not suppressed
'suppressed' - The interface is suppressedro Enumeration .1.3.6.1.4.1.248.12.2.2.3.1.14 |
hm2AgentSwitchIpInterfaceNumberOfFlapsThis mib variable displays the number of flaps occurred on the interfacero Unsigned32 .1.3.6.1.4.1.248.12.2.2.3.1.15 |
hm2AgentSwitchIpInterfaceCurrentPenaltyThis mib variable displays the current penalty of an interfacero Unsigned32 .1.3.6.1.4.1.248.12.2.2.3.1.16 |
hm2AgentSwitchIpInterfaceReUseTimeThis mib variable displays the number of seconds until the interface is
allowed to come upro Unsigned32 .1.3.6.1.4.1.248.12.2.2.3.1.17 |
hm2AgentSwitchIpInterfaceNetdirectedBCModeEnables or disables netdirected broadcasts for this interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.3.1.248 |
hm2AgentSwitchIpRouterDiscoveryTableThere is no global administrative flag for router discovery. The global
routing flag (hm2AgentSwitchIpRoutingMode) will be used for this purpose. If routing
is disabled, router discovery is disabled as well. SEQUENCE OF Hm2AgentSwitchIpRouterDiscoveryEntry .1.3.6.1.4.1.248.12.2.2.4 |
hm2AgentSwitchIpRouterDiscoveryEntry. Hm2AgentSwitchIpRouterDiscoveryEntry .1.3.6.1.4.1.248.12.2.2.4.1 |
hm2AgentSwitchIpRouterDiscoveryIfIndexInterface Number to configure Router Discovery on.ro Integer32 .1.3.6.1.4.1.248.12.2.2.4.1.1 |
hm2AgentSwitchIpRouterDiscoveryAdvertiseModeEnable or disable router discovery on the interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.4.1.2 |
hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementIntervalMaximum time allowed between sending router advertisements
from the interface.rw Integer32 .1.3.6.1.4.1.248.12.2.2.4.1.3 |
hm2AgentSwitchIpRouterDiscoveryMinAdvertisementIntervalMinimum time allowed between sending router advertisements from the interface.
This value must be less than or equal to
hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.248.12.2.2.4.1.4 |
hm2AgentSwitchIpRouterDiscoveryAdvertisementLifetimeValue of lifetime field of router advertsisement sent from
the interface.
This value must be greater than or equal to
hm2AgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.248.12.2.2.4.1.5 |
hm2AgentSwitchIpRouterDiscoveryPreferenceLevelPreferability of the address as a default router address,
related to other addresses on the same subnet. This is defined
as the larger the number, the higher the preference.rw Integer32 .1.3.6.1.4.1.248.12.2.2.4.1.6 |
hm2AgentSwitchIpRouterDiscoveryAdvertisementAddressAddress used when sending router advertisements from the interface.rw IpAddress .1.3.6.1.4.1.248.12.2.2.4.1.7 |
hm2AgentSwitchIpVlanTableA static VLAN for which routing can be enabled/disabled. SEQUENCE OF Hm2AgentSwitchIpVlanEntry .1.3.6.1.4.1.248.12.2.2.5 |
hm2AgentSwitchIpVlanEntryA static VLAN for which routing can be enabled/disabled. Hm2AgentSwitchIpVlanEntry .1.3.6.1.4.1.248.12.2.2.5.1 |
hm2AgentSwitchIpVlanIdThe VLAN's ID.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.248.12.2.2.5.1.1 |
hm2AgentSwitchIpVlanIfIndexThe IfIndex associated with this VLAN.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.248.12.2.2.5.1.2 |
hm2AgentSwitchIpVlanRoutingStatusStatus of Routing mode per VLAN.
active(1) - VLAN is enabled for routing
createAndGo(4) - Adds VLAN entry for routing
createAndWait(5) - Adds VLAN entry for routing
destroy(6) - Removes VLAN from routingrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.2.5.1.3 |
hm2AgentSwitchSecondaryAddressTableContains a list of secondary IP addresses associated with an interface. SEQUENCE OF Hm2AgentSwitchSecondaryAddressEntry .1.3.6.1.4.1.248.12.2.2.6 |
hm2AgentSwitchSecondaryAddressEntryA secondary IP address for a given interface. This IP address must not
conflict with the IP address configured in the hm2AgentSwitchIpInterfaceTable. Hm2AgentSwitchSecondaryAddressEntry .1.3.6.1.4.1.248.12.2.2.6.1 |
hm2AgentSwitchSecondaryIpAddressThe secondary IP address assigned to this interface. IpAddress .1.3.6.1.4.1.248.12.2.2.6.1.1 |
hm2AgentSwitchSecondaryNetMaskThe secondary netmask assigned to this interface. This value must be
set during creation and can not be changed.rw IpAddress .1.3.6.1.4.1.248.12.2.2.6.1.2 |
hm2AgentSwitchSecondaryStatusCreates a new entry in the secondary address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The hm2AgentSwitchSecondaryNetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.2.6.1.3 |
hm2AgentSwitchIpIcmpControlGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.2.8 |
hm2AgentSwitchIpIcmpEchoReplyModeSets the administrative Echo Reply Mode.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.8.1 |
hm2AgentSwitchIpIcmpRedirectsModeSets the administrative Mode for sending Redirects.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.2.8.2 |
hm2AgentSwitchIpIcmpRateLimitIntervalHiOS: Specifies the time interval between tokens being placed in the bucket
for ICMP Ratelimit.
HiSecOS: Specifies the average minimum time between subsequent ICMP packets for
each destination, using a token bucket algorithm. In times without ICMP packets,
the tokens accumulate to allow for bursts of up to
hm2AgentSwitchIpIcmpRateLimitBurstSize packets.rw Integer32 .1.3.6.1.4.1.248.12.2.2.8.3 |
hm2AgentSwitchIpIcmpRateLimitBurstSizeHiOS: Specifies the number of tokens to be placed after timeout.
HiSecOS: The size of the token bucket, fixed at 6 tokens.rw Integer32 .1.3.6.1.4.1.248.12.2.2.8.4 |
hm2AgentSwitchIntfIpHelperAddressTableContains a list of IP helper addresses associated with an interface. SEQUENCE OF Hm2AgentSwitchIntfIpHelperAddressEntry .1.3.6.1.4.1.248.12.2.2.10 |
hm2AgentSwitchIntfIpHelperAddressEntryAn IP helper address for a given interface. Hm2AgentSwitchIntfIpHelperAddressEntry .1.3.6.1.4.1.248.12.2.2.10.1 |
hm2AgentSwitchIntfIpHelperUdpPortUDP port number. Received packets with this destination UDP port
number are forwarded to the helper address in this entry.
A relay entry with port 0 allows dhcp, time, winnameserver, tacacs,
dns, tftp, netbios-ns and netbios-dgm relay. Unsigned32 .1.3.6.1.4.1.248.12.2.2.10.1.1 |
hm2AgentSwitchIntfIpHelperIpAddressAn IP helper address for packets received on this interface.
An address of 0.0.0.0 identifies the entry as a discard entry.
Packets that match a discard entry are dropped. IpAddress .1.3.6.1.4.1.248.12.2.2.10.1.2 |
hm2AgentSwitchIntfIpHelperHitCountThe number of times a packet has been forwarded or discarded according to this entry.ro Unsigned32 .1.3.6.1.4.1.248.12.2.2.10.1.4 |
hm2AgentSwitchIntfIpHelperStatusCreates a new entry in the Helper Address table.
Allowed values are:
createAndGo(4) - Creates an IP helper entry in this table.
destroy(6) - Removes the IP helper entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.2.10.1.5 |
hm2AgentSwitchClearIpDefaultGatewayResets the Global Default Gateway address.rw Enumeration .1.3.6.1.4.1.248.12.2.2.11 |
hm2AgentSwitchIpFirstActiveAddressTypeThe type of hm2AgentSwitchIpFirstActiveAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.2.2.248 |
hm2AgentSwitchIpFirstActiveAddressThe lowest ip address of any active routing interface.ro InetAddress .1.3.6.1.4.1.248.12.2.2.249 |
hm2AgentSwitchIpStaticDefaultPrefThe default preference for static routes.rw Integer32 .1.3.6.1.4.1.248.12.2.2.250 |
hm2AgentRouterRipConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.3 |
hm2AgentRouterRipAdminStateSets the administrative mode of RIP in the router.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.3.1 |
hm2AgentRouterRipSplitHorizonModeSets the RIP split horizon operating mode in the router.
A value of none(1) means split horizon processing is
disabled. When set to simple(2), the simple split
horizon technique is used. When set to poisonReverse(3),
the split horizon with poison reverse technique is used.
The default split horizon mode is simple(2).rw Enumeration .1.3.6.1.4.1.248.12.2.3.2 |
hm2AgentRouterRipAutoSummaryModeSets the RIP auto summarization mode in the router.
A value of enable(1) means that routes advertized by
this RIP router are combined, or summarized, whenever
possible into aggregates. When set to disable(2),
routes are not aggregated in RIP updates generated
by this router. The default auto summary mode is
enable(1).rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.3.3 |
hm2AgentRouterRipHostRoutesAcceptModeSets the RIP host route acceptance mode in the router.
A value of enable(1) means that host routes advertized
to this RIP router will be accepted (learned) into its
routing table. When set to disable(2), host routes
advertized in RIP updates from neighboring routers
are ignored. The default host routes accept mode is
enable(1).rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.3.4 |
hm2AgentRouterRipDefaultMetricDefault metric of redistributed routes, when RIP redistributes
from other protocols. {0} indicates that the parameter is not configured,
this value should not be set. Valid range for set is (1..15).rw Integer32 (0|1..15) .1.3.6.1.4.1.248.12.2.3.5 |
hm2AgentRouterRipDefaultMetricConfiguredFlag to determine whether RIP default-metric is configured or not.
Set to 'false' to unconfigure the default route metric. Set to 'true' is
not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.3.6 |
hm2AgentRouterRipDefaultInfoOriginateFlag to determine, whether RIP can advertise a default-route learned
from another protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.3.7 |
hm2AgentRipRouteRedistTableThis table contains the MIB objects required to configure
route-redistribution for RIP. Here, RIP is the Destination
protocol and the source protocols can be any of : BGP, OSPF,
Static, Connected. SEQUENCE OF Hm2AgentRipRouteRedistEntry .1.3.6.1.4.1.248.12.2.3.8 |
hm2AgentRipRouteRedistEntryThe entries of the table. Hm2AgentRipRouteRedistEntry .1.3.6.1.4.1.248.12.2.3.8.1 |
hm2AgentRipRouteRedistSourceSource route, from which RIP can redistribute routes.
This object also acts as the identifier for the
RIP redistribution Table entry.ro Enumeration .1.3.6.1.4.1.248.12.2.3.8.1.1 |
hm2AgentRipRouteRedistModeUser enabels/disables route-redistribution for a particular source
protocol.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.3.8.1.2 |
hm2AgentRipRouteRedistMetricMetric used for redistributing a particular source protocol route
into RIP. {0} indicates that the parameter is not configured, this value
should not be set. Valid range for set is (1..15).rw Integer32 (0|1..15) .1.3.6.1.4.1.248.12.2.3.8.1.3 |
hm2AgentRipRouteRedistMetricConfiguredFlag to determine whether RIP redistribute-metric is configured
or not. Set to 'false' to unconfigure redistribute metric. Set to 'true'
is not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.3.8.1.4 |
hm2AgentRipRouteRedistMatchInternalIf this flag is true, RIP redistributes OSPF internal routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.12.2.3.8.1.5 |
hm2AgentRipRouteRedistMatchExternal1If this flag is true, RIP redistributes OSPF External1 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.12.2.3.8.1.6 |
hm2AgentRipRouteRedistMatchExternal2If this flag is true, RIP redistributes OSPF External2 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.12.2.3.8.1.7 |
hm2AgentRipRouteRedistMatchNSSAExternal1If this flag is true, RIP redistributes OSPF NSSA-External1 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.12.2.3.8.1.8 |
hm2AgentRipRouteRedistMatchNSSAExternal2If this flag is true, RIP redistributes OSPF NSSA-External2 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.12.2.3.8.1.9 |
hm2AgentRipRouteRedistDistListAccess-list number of the access-list, which filters routes received
from a source-protocol.rw Unsigned32 (0|1000..1099) .1.3.6.1.4.1.248.12.2.3.8.1.10 |
hm2AgentRipRouteRedistDistListConfiguredFlag to determine whether Access-list is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.3.8.1.11 |
hm2AgentRip2IfConfTableA list of subnets which require separate
configuration in RIP. Augments rip2IfConfTable
in the RIPv2-MIB. SEQUENCE OF Hm2AgentRip2IfConfEntry .1.3.6.1.4.1.248.12.2.3.9 |
hm2AgentRip2IfConfEntryA Single Routing Domain in a single Subnet.
Augments rip2IfConfEntry in RIPv2-MIB. Hm2AgentRip2IfConfEntry .1.3.6.1.4.1.248.12.2.3.9.1 |
hm2AgentRip2IfConfAuthKeyIdThe identifier for the authentication key used
on this interface. This field is only meaningful
when the RIPv2-MIB rip2IfConfAuthType is md5(3);
otherwise, the value is not used.rw Integer32 .1.3.6.1.4.1.248.12.2.3.9.1.1 |
hm2AgentRouterRipRoutePrefThe route preference, sometimes called administrative distance, for RIP routes.
A route with a preference of 255 is considered unreachable.rw Integer32 .1.3.6.1.4.1.248.12.2.3.10 |
hm2AgentRouterRipUpdateTimerIntervalSets the RIP update timer interval in the router.
This is the time in seconds between two full routing table
update packets.rw Integer32 .1.3.6.1.4.1.248.12.2.3.248 |
hm2AgentRouterOspfConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.4 |
hm2AgentOspfDefaultMetricDefault metric of redistributed routes, when OSPF redistributes
from other protocols. {0} indicates that the parameter is not configured,
this value should not be set. Valid range for set is (1..16777214).rw Integer32 (0 | 1..16777214) .1.3.6.1.4.1.248.12.2.4.1 |
hm2AgentOspfDefaultMetricConfiguredFlag to determine whether OSPF default-metric is configured or not.
Set to 'false' to unconfigure the OSPF default-metric. Set to 'true' is
not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.2 |
hm2AgentOspfDefaultInfoOriginateFlag to determine, whether OSPF can advertise a default-route learned
from another protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.3 |
hm2AgentOspfDefaultInfoOriginateAlwaysWhen this flag is true, the router advertises 0.0.0.0/0.0.0.0 always.
Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the
router's forwarding table contains a default route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.4 |
hm2AgentOspfDefaultInfoOriginateMetricMetric of the default route, which OSPF advertises when learned from
other protocol.
(0) indicates that the parameter is not configured, this value should not be set.
Valid range for set is (1..16777214).rw Integer32 (0 | 1..16777214) .1.3.6.1.4.1.248.12.2.4.5 |
hm2AgentOspfDefaultInfoOriginateMetricConfiguredFlag to determine whether OSPF default-info originate metric
is configured or not. Setting to false unconfigures the
default route metric. Setting to true is not allowed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.6 |
hm2AgentOspfDefaultInfoOriginateMetricTypeMetric Type of the default route,which OSPF advertises when learned from
other protocol. It can be 1(external type 1) or 2(external type 2).rw Enumeration .1.3.6.1.4.1.248.12.2.4.7 |
hm2AgentOspfRouteRedistTableThis table contains the MIB objects required to configure
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,
Static, Connected. SEQUENCE OF Hm2AgentOspfRouteRedistEntry .1.3.6.1.4.1.248.12.2.4.8 |
hm2AgentOspfRouteRedistEntryThe entries of the table. Hm2AgentOspfRouteRedistEntry .1.3.6.1.4.1.248.12.2.4.8.1 |
hm2AgentOspfRouteRedistSourceSource protocol, from which OSPF can redistribute routes.
This object also acts as the identifier for the
OSPF redistribution Table entry.ro Enumeration .1.3.6.1.4.1.248.12.2.4.8.1.1 |
hm2AgentOspfRouteRedistModeUser enables/disables route-redistribution for a particular source
protocol.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.4.8.1.2 |
hm2AgentOspfRouteRedistMetricMetric used for redistributing a particular source protocol route
into OSPF.rw Integer32 .1.3.6.1.4.1.248.12.2.4.8.1.3 |
hm2AgentOspfRouteRedistMetricConfiguredFlag to determine whether OSPF redistribute-metric is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.8.1.4 |
hm2AgentOspfRouteRedistMetricTypeMetric Type of routes,which OSPF redistributes from other source protocols.
It can be 1(external type 1) or 2(external type 2).rw Enumeration .1.3.6.1.4.1.248.12.2.4.8.1.5 |
hm2AgentOspfRouteRedistTagIt specifies the tag field in routes redistributed by OSPF.rw Unsigned32 .1.3.6.1.4.1.248.12.2.4.8.1.6 |
hm2AgentOspfRouteRedistSubnetsIf this value is false, then OSPF will not redistribute subnetted routes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.8.1.7 |
hm2AgentOspfRouteRedistDistListAccess-list number of the access-list, which filters routes received
from a source-protocol.
HiOS: Valid access list numbers are between 1000 and 1099.
HiSecOS: Valid access list numbers are between 1 and 10000.rw Unsigned32 (0|1..10000) .1.3.6.1.4.1.248.12.2.4.8.1.8 |
hm2AgentOspfRouteRedistDistListConfiguredFlag to determine whether Access-list is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.8.1.9 |
hm2AgentOspfIfTableThe OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. Augments
ospfIfTable from the OSPF-MIB. SEQUENCE OF Hm2AgentOspfIfEntry .1.3.6.1.4.1.248.12.2.4.9 |
hm2AgentOspfIfEntryThe OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. Augments
ospfIfEntry in OSPF-MIB. Hm2AgentOspfIfEntry .1.3.6.1.4.1.248.12.2.4.9.1 |
hm2AgentOspfIfAuthKeyIdThe identifier for the authentication key used
on this interface. This field is only meaningful
when the OSPF-MIB ospfIfAuthType is md5(2);
otherwise, the value is not used.rw Integer32 .1.3.6.1.4.1.248.12.2.4.9.1.1 |
hm2AgentOspfIfIpMtuIgnoreFlagConfigures the IP MTU Ignore Flag value for this OSPF interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.4.9.1.2 |
hm2AgentOspfIfPassiveModeFlag to determine whether the interface is passive.
A passive interface will not participate in the OSPF
adjacency formation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.9.1.3 |
hm2AgentOspfIfAdvertiseSecondariesConfigures the advertisability of the secondary addresses
configured on this interface.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.4.9.1.4 |
hm2AgentOspfIfFastHelloModeConfigures the fast hello mode on this interface.
If enabled, hello packets are sent every 250ms,
ospfIfHelloInterval is ignored. The dead interval and spf delay
need to be re-configured accordingly for faster convergence.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.4.9.1.248 |
hm2AgentOspfVirtIfTableInformation about this router's virtual inter-
faces. Augments ospfVirtIfTable from the OSPF-MIB. SEQUENCE OF Hm2AgentOspfVirtIfEntry .1.3.6.1.4.1.248.12.2.4.10 |
hm2AgentOspfVirtIfEntryInformation about a single Virtual Interface.
Augments ospfVirtIfEntry in OSPF-MIB. Hm2AgentOspfVirtIfEntry .1.3.6.1.4.1.248.12.2.4.10.1 |
hm2AgentOspfVirtIfAuthKeyIdThe identifier for the authentication key used
on this virtual interface. This field is only meaningful
when the OSPF-MIB ospfVirtIfAuthType is md5(2);
otherwise, the value is not used.rw Integer32 .1.3.6.1.4.1.248.12.2.4.10.1.1 |
hm2AgentRouterOspfRFC1583CompatibilityModeFrom RFC2328:
Controls the preference rules used in Section 16.4 when
choosing among multiple AS-external-LSAs advertising the
same destination. When set to 'enabled', the preference
rules remain those specified by RFC 1583 ([Ref9]). When set
to 'disabled', the preference rules are those stated in
Section 16.4.1, which prevent routing loops when AS-
external-LSAs for the same destination have been originated
from different areas. Set to 'enabled' by default.
In order to minimize the chance of routing loops, all OSPF
routers in an OSPF routing domain should have
RFC1583Compatibility set identically. When there are routers
present that have not been updated with the functionality
specified in Section 16.4.1 of this memo, all routers should
have RFC1583Compatibility set to 'enabled'. Otherwise, all
routers should have RFC1583Compatibility set to 'disabled',
preventing all routing loops.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.4.11 |
hm2AgentOspfSpfDelayTimeDelay time (in seconds) between when OSPF
receives a topology change and when it
starts an SPF calculation. It can be an
integer from 0 to 65535. The default
time is 5 seconds. A value of 0 means
that there is no delay; that is, the
SPF calculation is started immediately.rw Integer32 .1.3.6.1.4.1.248.12.2.4.12 |
hm2AgentOspfSpfHoldTimeMinimum time (in seconds) between two
consecutive SPF calculations. It can
be an integer from 0 to 65535. The
default time is 10 seconds. A value
of 0 means that there is no delay;
that is, two SPF calculations can
be done, one immediately after the
other.rw Integer32 .1.3.6.1.4.1.248.12.2.4.13 |
hm2AgentOspfAutoCostRefBwAuto cost reference bandwidth of the
router interfaces for ospf metric calculations.
It can be an integer from 1 to 4294967. The
default reference bandwidth is 100 Mbps.rw Unsigned32 .1.3.6.1.4.1.248.12.2.4.14 |
hm2AgentOspfOpaqueLsaSupportThe router's support for Opaque LSA types.
This object is persistent and when written
the entity SHOULD save the change to non-volatile
storage.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.15 |
hm2AgentOspfAreaOpaqueLsdbTableThe OSPF Process's Area Link State Database (LSDB).
The LSDB contains type-10 Link State Advertisements
from throughout the areas that the device is attached to. SEQUENCE OF Hm2AgentOspfAreaOpaqueLsdbEntry .1.3.6.1.4.1.248.12.2.4.16 |
hm2AgentOspfAreaOpaqueLsdbEntryA single AreaOpaque Link State Advertisement. Hm2AgentOspfAreaOpaqueLsdbEntry .1.3.6.1.4.1.248.12.2.4.16.1 |
hm2AgentOspfAreaOpaqueLsdbAreaIdThe 32 bit identifier of the Area from which
the LSA was received.ro IpAddress .1.3.6.1.4.1.248.12.2.4.16.1.1 |
hm2AgentOspfAreaOpaqueLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertisement
format.ro Enumeration .1.3.6.1.4.1.248.12.2.4.16.1.2 |
hm2AgentOspfAreaOpaqueLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.248.12.2.4.16.1.3 |
hm2AgentOspfAreaOpaqueLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.248.12.2.4.16.1.4 |
hm2AgentOspfAreaOpaqueLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number the more recent
the advertisement.ro Integer32 .1.3.6.1.4.1.248.12.2.4.16.1.5 |
hm2AgentOspfAreaOpaqueLsdbAgeThis field is the age of the link state advertisement
in seconds.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.248.12.2.4.16.1.6 |
hm2AgentOspfAreaOpaqueLsdbChecksumThis field is the checksum of the complete contents of
the advertisement, excepting the age field. The age field
is excepted so that an advertisement's age can be
incremented without updating the checksum. The checksum
used is the same that is used for ISO connectionless
datagrams; it is commonly referred to as the Fletcher
checksum.ro Integer32 .1.3.6.1.4.1.248.12.2.4.16.1.7 |
hm2AgentOspfAreaOpaqueLsdbAdvertisementThe entire Link State Advertisement, including
its header.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string sizero OCTET STRING .1.3.6.1.4.1.248.12.2.4.16.1.8 |
hm2AgentOspfLocalLsdbTableThe OSPF Process's Link-Local Link State Database
for non-virtual links.
This table is identical to the OSPF LSDB Table
in format, but contains only Link-Local Link State
Advertisements for non-virtual links. The purpose is
to allow Link-Local LSAs to be displayed for each
non-virtual interface. This table is implemented to
support type-9 LSAs which are defined
in 'The OSPF Opaque LSA Option'. SEQUENCE OF Hm2AgentOspfLocalLsdbEntry .1.3.6.1.4.1.248.12.2.4.17 |
hm2AgentOspfLocalLsdbEntryA single Link State Advertisement. Hm2AgentOspfLocalLsdbEntry .1.3.6.1.4.1.248.12.2.4.17.1 |
hm2AgentOspfLocalLsdbIpAddressThe IP Address of the interface from
which the LSA was received if the interface is
numbered.ro IpAddress .1.3.6.1.4.1.248.12.2.4.17.1.1 |
hm2AgentOspfLocalLsdbAddressLessIfThe Interface Index of the interface from
which the LSA was received if the interface is
unnumbered.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.12.2.4.17.1.2 |
hm2AgentOspfLocalLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.248.12.2.4.17.1.3 |
hm2AgentOspfLocalLsdbLsidThe Link State ID is an LS Type Specific field
containing a 32 bit identifier in IP address format;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.248.12.2.4.17.1.4 |
hm2AgentOspfLocalLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.248.12.2.4.17.1.5 |
hm2AgentOspfLocalLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number the more recent
the advertisement.ro Integer32 .1.3.6.1.4.1.248.12.2.4.17.1.6 |
hm2AgentOspfLocalLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.248.12.2.4.17.1.7 |
hm2AgentOspfLocalLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.248.12.2.4.17.1.8 |
hm2AgentOspfLocalLsdbAdvertisementThe entire Link State Advertisement, including
its header.
Note that for variable length LSAs, SNMP agents
may not be able to return the largest string size.ro OCTET STRING .1.3.6.1.4.1.248.12.2.4.17.1.9 |
hm2AgentOspfAsLsdbTableThe OSPF Process's AS-scope LSA Link State Database.
The Database contains the AS-scope Link State
Advertisements from throughout the areas that
the device is attached to.
This table is identical to the OSPF LSDB Table
in format, but contains only AS-scope Link State
Advertisements. The purpose is to allow AS-scope
LSAs to be displayed once for the router rather
than once in each non-stub area. SEQUENCE OF Hm2AgentOspfAsLsdbEntry .1.3.6.1.4.1.248.12.2.4.18 |
hm2AgentOspfAsLsdbEntryA single Link State Advertisement. Hm2AgentOspfAsLsdbEntry .1.3.6.1.4.1.248.12.2.4.18.1 |
hm2AgentOspfAsLsdbTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.ro Enumeration .1.3.6.1.4.1.248.12.2.4.18.1.1 |
hm2AgentOspfAsLsdbLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.248.12.2.4.18.1.2 |
hm2AgentOspfAsLsdbRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.ro RouterID (OSPF-MIB) .1.3.6.1.4.1.248.12.2.4.18.1.3 |
hm2AgentOspfAsLsdbSequenceThe sequence number field is a signed 32-bit
integer. It starts with the value '80000001'h,
or -'7FFFFFFF'h, and increments until '7FFFFFFF'h.
Thus, a typical sequence number will be very negative.
It is used to detect old and duplicate link state
advertisements. The space of sequence numbers is linearly
ordered. The larger the sequence number the more recent
the advertisement.ro Integer32 .1.3.6.1.4.1.248.12.2.4.18.1.4 |
hm2AgentOspfAsLsdbAgeThis field is the age of the link state adver-
tisement in seconds.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.248.12.2.4.18.1.5 |
hm2AgentOspfAsLsdbChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checksum. The checksum
used is the same that is used for ISO connec-
tionless datagrams; it is commonly referred to
as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.248.12.2.4.18.1.6 |
hm2AgentOspfAsLsdbAdvertisementThe entire Link State Advertisement, including
its header.ro OCTET STRING .1.3.6.1.4.1.248.12.2.4.18.1.7 |
hm2AgentOspfDefaultPassiveModeFlag to determine, whether all the interfaces are passive interfaces
by default. A passive interface will not participate in the OSPF
adjacency formation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.19 |
hm2AgentOspfRoutePrefIntraAreaThe route preference, sometimes called administrative distance, for intra-area OSPFv2 routes.
A route with a preference of 255 is considered unreachable.rw Integer32 .1.3.6.1.4.1.248.12.2.4.20 |
hm2AgentOspfRoutePrefInterAreaThe route preference, sometimes called administrative distance, for inter-area OSPFv2 routes.
A route with a preference of 255 is considered unreachable.rw Integer32 .1.3.6.1.4.1.248.12.2.4.21 |
hm2AgentOspfRoutePrefExternalThe route preference, sometimes called administrative distance, for external OSPFv2 routes.
A route with a preference of 255 is considered unreachable.rw Integer32 .1.3.6.1.4.1.248.12.2.4.22 |
hm2AgentOspfAreaNSSATableInformation about all the configured Not-So-Stubby-Area(NSSAs) in OSPF.
Augments ospfAreaTable from the OSPF-MIB. SEQUENCE OF Hm2AgentOspfAreaNSSAEntry .1.3.6.1.4.1.248.12.2.4.248 |
hm2AgentOspfAreaNSSAEntryInformation about a single Not-So-Stubby-Area(NSSA).
Augments ospfAreaEntry in OSPF-MIB. Hm2AgentOspfAreaNSSAEntry .1.3.6.1.4.1.248.12.2.4.248.1 |
hm2AgentOspfAreaNSSAImportSummariesWhen set to enabled, OSPF's summary routes are imported into
the NSSA as Type-3 summary-LSAs.
When set to disabled, summary routes are not imported
into the NSSA.
The default setting is enabled.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.4.248.1.1 |
hm2AgentOspfAreaNSSARedistributeWhen set to enabled NSSA ASBRs will not redistribute external
routes into the NSSA and they will cease to originate Type-7
external LSAs for external routes.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.4.248.1.2 |
hm2AgentOspfAreaNSSADefaultInfoOriginateDetermines if the router will originate a Type-7 default LSA
into the NSSA. This command will cause a default LSA to be
originated only if the router is an NSSA ABR or ASBR.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.4.248.1.3 |
hm2AgentOspfAreaNSSADefaultMetricDefines the metric value advertised in the Type-7 default LSA
originated by this routerrw Integer32 .1.3.6.1.4.1.248.12.2.4.248.1.4 |
hm2AgentOspfAreaNSSADefaultMetricTypeDefines the metric type advertised in the Type-7 default LSA
originated by this routerrw Enumeration .1.3.6.1.4.1.248.12.2.4.248.1.5 |
hm2AgentOspfIfMetricTableInformation about interface metrics. SEQUENCE OF Hm2AgentOspfIfMetricEntry .1.3.6.1.4.1.248.12.2.4.249 |
hm2AgentOspfIfMetricEntryInformation about interface metrics. Hm2AgentOspfIfMetricEntry .1.3.6.1.4.1.248.12.2.4.249.1 |
hm2AgentOspfIfMetricCalculatedCostReturns the actual cost value used by OSPF for
this interface.ro Integer32 (1..'FFFF'h) .1.3.6.1.4.1.248.12.2.4.249.1.1 |
hm2AgentSnmpTrapFlagsConfigGroupLayer3 OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.5 |
hm2AgentSnmpVRRPNewMasterTrapFlagThis flag enables the sending of VRRP new master notification
traps.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.5.1 |
hm2AgentSnmpVRRPAuthFailureTrapFlagThis flag enables the sending of VRRP authentication failure
notification traps.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.5.2 |
hm2AgentBootpDhcpRelayGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.6 |
hm2AgentBootpDhcpRelayMaxHopCountThe BOOTP/DHCP Max Hop Count.
The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16
assuming that the request is looped through the intermediate agents. The default value is 4.rw Integer32 .1.3.6.1.4.1.248.12.2.6.1 |
hm2AgentBootpDhcpRelayMinWaitTimeThe BOOTP/DHCP Minimum Wait Time.
When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs'
(seconds since client began booting) field of the request as a factor in deciding whether to
relay the request or not.rw Integer32 .1.3.6.1.4.1.248.12.2.6.4 |
hm2AgentBootpDhcpRelayCircuitIdOptionModeThe BOOTP/DHCP Circuit ID Option Mode.
This flag is set to enable/disable the network element to add/remove the DHCP Relay agent
Circuit ID sub-options.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.6.5 |
hm2AgentECMPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.7 |
hm2AgentECMPOspfMaxPathsIt sets the number of paths that OSPF can report for a given destination
where maxpaths is platform-dependent.rw Integer32 .1.3.6.1.4.1.248.12.2.7.1 |
hm2AgentRouterVrrpConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.8 |
hm2AgentRouterVrrpAdminStateSets the administrative mode of VRRP in the router.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.8.1 |
hm2AgentVrrpOperations OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.9 |
hm2AgentRouterVrrpOperTableOperations table for a VRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
`hm2AgentRouterVrrpOperEntry' items.obsolete SEQUENCE OF Hm2AgentRouterVrrpOperEntry .1.3.6.1.4.1.248.12.2.9.1 |
hm2AgentRouterVrrpOperEntryAn entry in the table contains operational priority that is
associated with a virtual router.obsolete Hm2AgentRouterVrrpOperEntry .1.3.6.1.4.1.248.12.2.9.1.1 |
hm2AgentRouterVrrpOperPriorityThis object specifies the operational priority of the VRRP router.
This value will be afftected by both the tracking process and the
configured priority set by the vrrpOperPriority object.roobsolete Integer32 .1.3.6.1.4.1.248.12.2.9.1.1.1 |
hm2AgentRouterVrrpNumberOfFastInstNumber of VRRP instances with advertisement interval less
than one second.ro Integer32 .1.3.6.1.4.1.248.12.2.9.248 |
hm2AgentIpHelperGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.11 |
hm2AgentIpHelperAdminModeAdministratively enable or disable IP helper.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.11.1 |
hm2AgentDhcpClientMsgsReceivedThe Number of DHCP Requests Received.
Total number of DHCP requests received from all clients.ro Counter32 .1.3.6.1.4.1.248.12.2.11.2 |
hm2AgentDhcpClientMsgsRelayedThe Number of DHCP Requests Forwarded.
Total number of DHCP requests relayed to a server.ro Counter32 .1.3.6.1.4.1.248.12.2.11.3 |
hm2AgentDhcpServerMsgsReceivedThe number of DHCP messages received from a server.ro Counter32 .1.3.6.1.4.1.248.12.2.11.4 |
hm2AgentDhcpServerMsgsRelayedThe number of DHCP messages relayed to a server.ro Counter32 .1.3.6.1.4.1.248.12.2.11.5 |
hm2AgentUdpClientMsgsReceivedThe number of UDP messages received from all clients.ro Counter32 .1.3.6.1.4.1.248.12.2.11.6 |
hm2AgentUdpClientMsgsRelayedThe number of UDP messages relayed to a server.ro Counter32 .1.3.6.1.4.1.248.12.2.11.7 |
hm2AgentSwitchIpHelperAddressTableContains a list of IP helper addresses configured globally. SEQUENCE OF Hm2AgentSwitchIpHelperAddressEntry .1.3.6.1.4.1.248.12.2.11.8 |
hm2AgentSwitchIpHelperAddressEntryAn IP Helper address that applies to packets received on any interface. Hm2AgentSwitchIpHelperAddressEntry .1.3.6.1.4.1.248.12.2.11.8.1 |
hm2AgentSwitchIpHelperUdpPortUDP port number. A relay entry with port 0 allows dhcp, time,
winnameserver, tacacs, dns, tftp, netbios-ns and netbios-dgm relay.rw Unsigned32 .1.3.6.1.4.1.248.12.2.11.8.1.1 |
hm2AgentSwitchIpHelperAddressThe IP Helper address assigned to this interface.rw IpAddress .1.3.6.1.4.1.248.12.2.11.8.1.2 |
hm2AgentSwitchIpHelperHitCountThe number of times a packet has been forwarded or discarded according to this entry.ro Unsigned32 .1.3.6.1.4.1.248.12.2.11.8.1.3 |
hm2AgentSwitchIpHelperStatusCreates a new entry in the global IP Helper address table.
Allowed values are:
createAndGo(4) - Creates an IP helper entry in this table.
destroy(6) - Removes the IP helper entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.11.8.1.4 |
hm2AgentUdpClientMsgsTtlExpiredThe number of UDP messages received with an expired TTL.ro Counter32 .1.3.6.1.4.1.248.12.2.11.9 |
hm2AgentUdpClientMsgsDiscardedThe number of UDP messages that matched a discard entry.ro Counter32 .1.3.6.1.4.1.248.12.2.11.10 |
hm2AgentInternalVlanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.12 |
hm2AgentInternalVlanBaseThe VLAN ID internally assigned to the first port-based routing interface.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.248.12.2.12.1 |
hm2AgentInternalVlanPolicyWhether to search up or down from the base VLAN ID for a free VLAN ID to
assign to a port-based routing interface.rw Enumeration .1.3.6.1.4.1.248.12.2.12.2 |
hm2AgentSwitchInternalVlanTableContains a list of VLAN IDs used internally for port-based routing interfaces. SEQUENCE OF Hm2AgentSwitchInternalVlanEntry .1.3.6.1.4.1.248.12.2.12.3 |
hm2AgentSwitchInternalVlanEntryA VLAN ID internally assigned to a port-based routing interface. Hm2AgentSwitchInternalVlanEntry .1.3.6.1.4.1.248.12.2.12.3.1 |
hm2AgentSwitchInternalVlanIdA VLAN ID internally assigned to a port-based routing interface. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.248.12.2.12.3.1.1 |
hm2AgentSwitchInternalVlanIfIndexInterface index of port-based routing interface using this VLAN ID.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.248.12.2.12.3.1.2 |
hm2AgentOspfQueueGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.13 |
hm2AgentOspfQueueTableTable lists information about OSPFv2 message queue utilization. SEQUENCE OF Hm2AgentOspfQueueEntry .1.3.6.1.4.1.248.12.2.13.1 |
hm2AgentOspfQueueEntryInformation on a specific OSPFv2 message queue. Hm2AgentOspfQueueEntry .1.3.6.1.4.1.248.12.2.13.1.1 |
hm2AgentOspfQueueIndexIndex value for this message queue. Unsigned32 .1.3.6.1.4.1.248.12.2.13.1.1.1 |
hm2AgentOspfQueueNameName of an OSPFv2 message queue.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.13.1.1.2 |
hm2AgentOspfQueueLengthThe number of messages currently in the message queue.ro Gauge32 .1.3.6.1.4.1.248.12.2.13.1.1.3 |
hm2AgentOspfQueueHighThe high water mark of the number of messages in the message queue.ro Gauge32 .1.3.6.1.4.1.248.12.2.13.1.1.4 |
hm2AgentOspfQueueDropsThe number of items dropped because the message queue was full.ro Counter32 .1.3.6.1.4.1.248.12.2.13.1.1.5 |
hm2AgentOspfQueueLimitThe maximum number of messages this queue can hold.ro Unsigned32 .1.3.6.1.4.1.248.12.2.13.1.1.6 |
hm2AgentOspfPacketStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.14 |
hm2AgentOspfCountersClearedThe time since OSPFv2 counters were last cleared, in seconds.ro Unsigned32 .1.3.6.1.4.1.248.12.2.14.1 |
hm2AgentOspfLsaRetxCountThe total number of LSAs retransmitted since OSPF counters were last cleared.
If the same LSA is retransmitted to multiple neighbors, the count is incremented
for each neighbor.ro Counter32 .1.3.6.1.4.1.248.12.2.14.2 |
hm2AgentOspfHellosRxThe total number of OSPFv2 Hello packets received since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.3 |
hm2AgentOspfHellosTxThe total number of OSPFv2 Hello packets transmitted since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.4 |
hm2AgentOspfDdRxThe total number of OSPFv2 Database Description packets received since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.5 |
hm2AgentOspfDdTxThe total number of OSPFv2 Database Description packets transmitted since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.6 |
hm2AgentOspfLsReqRxThe total number of OSPFv2 LS Request packets received since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.7 |
hm2AgentOspfLsReqTxThe total number of OSPFv2 LS Request packets transmitted since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.8 |
hm2AgentOspfLsUpdatesRxThe total number of OSPFv2 LS Update packets received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.9 |
hm2AgentOspfLsUpdatesTxThe total number of OSPFv2 LS Update packets transmitted since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.10 |
hm2AgentOspfLsAckRxThe total number of OSPFv2 LS Acknowledgement packets received since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.11 |
hm2AgentOspfLsAckTxThe total number of OSPFv2 LS Acknowledgement packets transmitted since OSPF counters were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.12 |
hm2AgentOspfLsUpdatesRxMaxThe maximum rate of OSPFv2 LS Update packets received over any 5-second
interval since OSPF counters were last cleared. The rate is given in packets
per second (that is, the number of packets received during the 5-second
interval, divided by 5).ro Gauge32 .1.3.6.1.4.1.248.12.2.14.13 |
hm2AgentOspfLsUpdatesTxMaxThe maximum rate of OSPFv2 LS Update packets transmitted over any 5-second
interval since OSPF counters were last cleared. The rate is given in packets
per second (that is, the number of packets transmitted during the 5-second
interval, divided by 5).ro Gauge32 .1.3.6.1.4.1.248.12.2.14.14 |
hm2AgentOspfType1LsasRxThe number of type 1 (router) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.15 |
hm2AgentOspfType2LsasRxThe number of type 2 (network) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.16 |
hm2AgentOspfType3LsasRxThe number of type 3 (network summary) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.17 |
hm2AgentOspfType4LsasRxThe number of type 4 (ASBR summary) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.18 |
hm2AgentOspfType5LsasRxThe number of type 5 (external) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.19 |
hm2AgentOspfType7LsasRxThe number of type 7 (NSSA external) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.20 |
hm2AgentOspfType9LsasRxThe number of type 9 (Link Opaque) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.21 |
hm2AgentOspfType10LsasRxThe number of type 10 (Area Opaque) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.22 |
hm2AgentOspfType11LsasRxThe number of type 11 (AS Opaque) LSAs received since OSPF counters
were last cleared.ro Counter32 .1.3.6.1.4.1.248.12.2.14.23 |
hm2AgentOspfSpfStatsTableContains statistics for the twenty most recent SPF runs.
Statistics are reported from the oldest SPF first to the most recent. SEQUENCE OF Hm2AgentOspfSpfStatsEntry .1.3.6.1.4.1.248.12.2.15 |
hm2AgentOspfSpfStatsEntryStatistics for a single SPF run. Hm2AgentOspfSpfStatsEntry .1.3.6.1.4.1.248.12.2.15.1 |
hm2AgentOspfSpfIndexInteger that uniquely identifies an SPF run. This value is
incremented each time OSPF runs a full routing table calculation. Unsigned32 .1.3.6.1.4.1.248.12.2.15.1.1 |
hm2AgentOspfSpfStatsDeltaTHow long since this routing table calculation ran. The time is
given in seconds.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.248.12.2.15.1.2 |
hm2AgentOspfSpfStatsIntraNumber of milliseconds to compute intra-area routes.ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.248.12.2.15.1.3 |
hm2AgentOspfSpfStatsSummNumber of milliseconds to compute inter-area routes.ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.248.12.2.15.1.4 |
hm2AgentOspfSpfStatsExtNumber of milliseconds to compute external routes.ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.248.12.2.15.1.5 |
hm2AgentOspfSpfStatsSpfTotalNumber of milliseconds for entire routing table calculation.ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.248.12.2.15.1.6 |
hm2AgentOspfSpfStatsRibUpdateNumber of milliseconds to update the common routing table.ro Unsigned32 UNITS "milli-seconds" .1.3.6.1.4.1.248.12.2.15.1.7 |
hm2AgentOspfSpfStatsReasonReasons why a routing table calculation was required.
R - new router LSA,
N - new Network LSA,
SN - new network summary LSA,
SA - new ASBR summary LSA,
X - new external LSA.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.15.1.8 |
hm2AgentRoutingHeapGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.16 |
hm2AgentRoutingHeapSizeThe size of the routing heap, in bytes. Unicast routing protocols
and ARP allocate memory from the routing heap.ro Unsigned32 .1.3.6.1.4.1.248.12.2.16.1 |
hm2AgentRoutingHeapInUseThe number of bytes currently allocated from the routing heap.ro Gauge32 .1.3.6.1.4.1.248.12.2.16.2 |
hm2AgentRoutingHeapHighHigh water mark for the number of bytes allocated from the routing heap.ro Gauge32 .1.3.6.1.4.1.248.12.2.16.3 |
hm2AgentRoutingTableSummaryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.17 |
hm2AgentConnectedRoutesThe number of connected routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.1 |
hm2AgentStaticRoutesThe number of static routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.2 |
hm2AgentRipRoutesThe number of RIP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.3 |
hm2AgentOspfRoutesThe number of OSPFv2 routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.4 |
hm2AgentOspfIntraRoutesThe number of OSPFv2 intra-area routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.5 |
hm2AgentOspfInterRoutesThe number of OSPFv2 inter-area routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.6 |
hm2AgentOspfExt1RoutesThe number of OSPFv2 external type 1 routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.7 |
hm2AgentOspfExt2RoutesThe number of OSPFv2 external type 2 routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.8 |
hm2AgentBgpRoutesThe number of BGP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.9 |
hm2AgentEbgpRoutesThe number of external BGP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.10 |
hm2AgentIbgpRoutesThe number of internal BGP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.11 |
hm2AgentLocalBgpRoutesThe number of local BGP routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.12 |
hm2AgentRejectRoutesThe number of reject routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.13 |
hm2AgentTotalRoutesThe number of routes in the IPv4 routing table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.14 |
hm2AgentBestRoutesThe number of IPv4 routes in the forwarding table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.15 |
hm2AgentBestRoutesHighThe highest number of IPv4 routes in the forwarding table.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.16 |
hm2AgentAlternateRoutesThe number of alternate routes in the IPv4 routing table.
An alternate route is less preferred than the best route and is not used for forwarding.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.17 |
hm2AgentRouteAddsThe number of routes added to the IPv4 routing table.ro Counter32 .1.3.6.1.4.1.248.12.2.17.18 |
hm2AgentRouteModifiesThe number of routes changed in the IPv4 routing table.ro Counter32 .1.3.6.1.4.1.248.12.2.17.19 |
hm2AgentRouteDeletesThe number of routes removed from the IPv4 routing table.ro Counter32 .1.3.6.1.4.1.248.12.2.17.20 |
hm2AgentUnresolvedRouteAddsThe number of IPv4 route adds that failed because none of the route's next hops were on a local subnet.ro Counter32 .1.3.6.1.4.1.248.12.2.17.21 |
hm2AgentInvalidRouteAddsThe number of IPv4 routes adds that failed because the route was invalid.ro Counter32 .1.3.6.1.4.1.248.12.2.17.22 |
hm2AgentFailedRouteAddsThe number of IPv4 routes adds that failed because of a resource limitation in the routing tablero Counter32 .1.3.6.1.4.1.248.12.2.17.23 |
hm2AgentReservedLocalsThe number of IPv4 routing table entries reserved for a local subnet on a routing interface that is down.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.24 |
hm2AgentUniqueNextHopsThe number of distinct next hops used among all IPv4 routes currently in the routing table.
These include local interfaces for local routes and neighbors for indirect routes.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.25 |
hm2AgentUniqueNextHopsHighThe highest count of unique next hops since counters were last cleared.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.26 |
hm2AgentNextHopGroupsThe current number of next hop groups in use by one or more routes.
Each next hop group includes one or more next hops.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.27 |
hm2AgentNextHopGroupsHighThe highest count of next hop groups since counters were last cleared.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.28 |
hm2AgentEcmpGroupsThe number of next hop groups with multiple next hops.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.29 |
hm2AgentEcmpGroupsHighThe high water mark of the number of ECMP groups.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.30 |
hm2AgentEcmpRoutesThe current number of IPv4 routes with multiple next hops.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.31 |
hm2AgentTruncEcmpRoutesThe number of ECMP routes that are currently installed in the forwarding table
with just one next hop. The forwarding table may limit the number of ECMP
routes or the number of ECMP groups. When an ECMP route cannot be installed
because such a limit is reached, the route is installed with a single next hop.ro Gauge32 .1.3.6.1.4.1.248.12.2.17.32 |
hm2AgentEcmpRetriesThe number of ECMP routes that have been installed in the forwarding table
after initially being installed with a single next hop.ro Counter32 .1.3.6.1.4.1.248.12.2.17.33 |
hm2AgentEcmpCountTableA count of the number of routes with each number of ECMP next hops. SEQUENCE OF Hm2AgentEcmpCountEntry .1.3.6.1.4.1.248.12.2.18 |
hm2AgentEcmpCountEntryNumber of IPv4 routes with a given number of next hops. Hm2AgentEcmpCountEntry .1.3.6.1.4.1.248.12.2.18.1 |
hm2AgentEcmpNextHopCountThe number of next hops in a route. From 0 to the maximum number of
next hops in an ECMP route. The maximum varies by platform. Unsigned32 .1.3.6.1.4.1.248.12.2.18.1.1 |
hm2AgentEcmpRouteCountThe number of IPv4 routes with agentEcmpNextHopCount next hops.ro Gauge32 .1.3.6.1.4.1.248.12.2.18.1.2 |
hm2AgentOspfStubRouterGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.19 |
hm2AgentOspfStubRouterAdvertisementSpecifies how the router LSAs are advertised by the router.
The value doNotAdvertise indicates the advertisement of a
standard router LSA and is the default value. The value
advertise indicates the advertisement of a stub router LSA.ro Enumeration .1.3.6.1.4.1.248.12.2.19.1 |
hm2AgentOspfStubRouterReasonThis indicates the reason because of which the router is in Stub mode.
This is valid only if the agentOspfStubRouterMode is 'active'.ro Enumeration .1.3.6.1.4.1.248.12.2.19.2 |
hm2AgentOspfStubRouterStartupTimeRemainingThe time remaining (in seconds) for the router to come out of the
stub mode. This is valid only if the agentOspfStubRouterReason is
'startup'.ro Unsigned32 .1.3.6.1.4.1.248.12.2.19.3 |
hm2AgentOspfStubRouterDurationTime elapsed (in seconds) since the router last entered the stub
router mode. This is valid only if the agentOspfStubRouterMode is
'active' and agentOspfStubRouterReason is 'resource-limitation'.ro Unsigned32 .1.3.6.1.4.1.248.12.2.19.4 |
hm2AgentOspfNbrTableInformation about this router's neighbors.
Augments ospfNbrTable from the OSPF-MIB. SEQUENCE OF Hm2AgentOspfNbrEntry .1.3.6.1.4.1.248.12.2.249 |
hm2AgentOspfNbrEntryInformation about a single neighbor.
Augments ospfNbrEntry in OSPF-MIB. Hm2AgentOspfNbrEntry .1.3.6.1.4.1.248.12.2.249.1 |
hm2AgentOspfNbrDeadTimeThe neighbor's Dead Time is the amount of remaining time
since the last OSPF hello packet received, before
declaring the neighbor status as down.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.248.12.2.249.1.1 |
hm2AgentOspfRouteTableInformation about this router's OSPF routes. SEQUENCE OF Hm2AgentOspfRouteEntry .1.3.6.1.4.1.248.12.2.250 |
hm2AgentOspfRouteEntryInformation about a single route. Hm2AgentOspfRouteEntry .1.3.6.1.4.1.248.12.2.250.1 |
hm2AgentOspfRouteNetThe IP Address of the Net or Subnet indicated
by the route. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.2.250.1.1 |
hm2AgentOspfRouteMaskThe Subnet Mask that pertains to the Net or
Subnet. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.2.250.1.2 |
hm2AgentOspfRouteCostThe route cost calculated in the SPF algorithm to reach the network.ro Integer32 .1.3.6.1.4.1.248.12.2.250.1.3 |
hm2AgentOspfRouteProtoTypeThe type of route that was learned from OSPF.ro Enumeration .1.3.6.1.4.1.248.12.2.250.1.4 |
hm2AgentVrrpExtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.260 |
hm2AgentVrrpTrackingTableThis table contains variables to define
an entry in the VRRP Tracking database. SEQUENCE OF Hm2AgentVrrpTrackingEntry .1.3.6.1.4.1.248.12.2.260.1 |
hm2AgentVrrpTrackingEntryThe entries of the table. Hm2AgentVrrpTrackingEntry .1.3.6.1.4.1.248.12.2.260.1.1 |
hm2AgentVrrpTrackIfIndexDURABLE: { 1:all }
The interface number of the virtual router Integer32 .1.3.6.1.4.1.248.12.2.260.1.1.1 |
hm2AgentVrrpTrackVridDURABLE: { 1:all }
The virtual router id for this virtual router Integer32 .1.3.6.1.4.1.248.12.2.260.1.1.2 |
hm2AgentVrrpTrackIdDURABLE: { 1:all }
The id of the object being tracked SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.248.12.2.260.1.1.3 |
hm2AgentVrrpTrackDecrementDURABLE: { 1:all }
The value by wich the current priority of the virtual router
is decremented when the tracked object goes DOWN.rw Integer32 .1.3.6.1.4.1.248.12.2.260.1.1.4 |
hm2AgentVrrpTrackOperStatusShows if the tracked object is currently UP or DOWN or NOT-READYro Enumeration .1.3.6.1.4.1.248.12.2.260.1.1.5 |
hm2AgentVrrpTrackRowStatusDURABLE: { 1:all }
Defines the status of a vrrp tracking database entry.
Set to createAndGo(4) to create a new row.
Set to destroy(6) to delete an entry.
Reads as active(1) if the tracked object exists and is trackable,
notReady(3) otherwise.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.260.1.1.6 |
hm2AgentVrrpExtTableThis table contains variables to define
an entry in the VRRP enhancements database. SEQUENCE OF Hm2AgentVrrpExtEntry .1.3.6.1.4.1.248.12.2.260.2 |
hm2AgentVrrpExtEntryThe entry of the hm2AgentVrrpExtTable. Hm2AgentVrrpExtEntry .1.3.6.1.4.1.248.12.2.260.2.1 |
hm2AgentVrrpExtIfIndexThe interface number of the virtual router Integer32 .1.3.6.1.4.1.248.12.2.260.2.1.1 |
hm2AgentVrrpExtVridThe virtual router id for this virtual router Integer32 .1.3.6.1.4.1.248.12.2.260.2.1.2 |
hm2AgentVrrpExtDomainIdThe domain this virtual router is a member of. If set to
0, the virtual router is not a member of any domain.rw Integer32 .1.3.6.1.4.1.248.12.2.260.2.1.3 |
hm2AgentVrrpExtDomainRoleThe role of this virtual router in its domain. This is none(1) if
the virtual router is not member of a domain, supervisor(3) if it
is the supervisor of its domain, member(2) otherwise.rw Enumeration .1.3.6.1.4.1.248.12.2.260.2.1.4 |
hm2AgentVrrpExtDomainStatusShows if the domain configuration is correct for this virtual routerro Enumeration .1.3.6.1.4.1.248.12.2.260.2.1.5 |
hm2AgentVrrpExtAdvertAddressThe IP address advertisements of the virtual router are sent torw IpAddress .1.3.6.1.4.1.248.12.2.260.2.1.6 |
hm2AgentVrrpExtAdvertTimerThis is used to set the interval between advertisements in
milliseconds. This accesses the same value as
vrrpOperAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.248.12.2.260.2.1.7 |
hm2AgentVrrpExtCfgPriorityThe configured priority of the virtual router. This can be
different from the operating priority if tracked objects are down
or the virtual router is the ip address ownerrw Integer32 .1.3.6.1.4.1.248.12.2.260.2.1.8 |
hm2AgentVrrpExtNotifyAddressThe IP address notifications of the virtual router are sent torw IpAddress .1.3.6.1.4.1.248.12.2.260.2.1.9 |
hm2AgentVrrpExtNotifyLinkdownEnables or disables sending of notification messages if the
virtual router's interface goes down.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.260.2.1.10 |
hm2AgentVrrpExtPreemptionDelayTime (in seconds) after startup of the virtual router by which the
preemption of a Master with a lower priority is delayed.rw Integer32 .1.3.6.1.4.1.248.12.2.260.2.1.11 |
hm2AgentVrrpPrimaryVirtualAddressThe virtual IP address in the subnet of the primary ip address on
the interface. If no match is found, an unspecified virtual address
is returned. If no virtual address is configured, 0.0.0.0 is returned.ro IpAddress .1.3.6.1.4.1.248.12.2.260.2.1.12 |
hm2AgentVrrpExtMethodThe source of the VRRP instance. User can set the object to none(1), config(2), ttdp(3).rw Enumeration .1.3.6.1.4.1.248.12.2.260.2.1.13 |
hm2AgentVrrpDomainTableThis table contains variables to define
an entry in the VRRP domain database. SEQUENCE OF Hm2AgentVrrpDomainEntry .1.3.6.1.4.1.248.12.2.260.3 |
hm2AgentVrrpDomainEntryThe entries of the table. Hm2AgentVrrpDomainEntry .1.3.6.1.4.1.248.12.2.260.3.1 |
hm2AgentVrrpDomainIdThe domain ID. Integer32 .1.3.6.1.4.1.248.12.2.260.3.1.1 |
hm2AgentVrrpDomainMemberSendAdvDURABLE: { 1:all }
Determines if the members of this domain send advertisement packets.
If set to disabled(2), only the supervisor of the domain sends packets.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.12.2.260.3.1.2 |
hm2AgentVrrpDomainStatusShows if the configuration of the domain is complete.ro Enumeration .1.3.6.1.4.1.248.12.2.260.3.1.3 |
hm2AgentVrrpDomainSupervisorIfIndexThe interface number of the supervisor of the domainro Integer32 .1.3.6.1.4.1.248.12.2.260.3.1.4 |
hm2AgentVrrpDomainSupervisorVridThe virtual router id of the supervisor of the domain. 0 if unconfiguredro Integer32 .1.3.6.1.4.1.248.12.2.260.3.1.5 |
hm2AgentVrrpDomainOperPriorityThe current operating priority of the domain. This can be
different from the configured priority if tracked objects are down.
For domain members this is the priority of the supervisor of that
Domain if the supervisor is configured and up.ro Integer32 .1.3.6.1.4.1.248.12.2.260.3.1.6 |
hm2AgentVrrpDomainSupervisorOperStateShows the current operational state of the domain supervisor.ro Enumeration .1.3.6.1.4.1.248.12.2.260.3.1.7 |
hm2AgentNeighbourGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.270 |
hm2AgentStaticNeighbourTable. SEQUENCE OF Hm2AgentStaticNeighbourEntry .1.3.6.1.4.1.248.12.2.270.10 |
hm2AgentStaticNeighbourEntry. Hm2AgentStaticNeighbourEntry .1.3.6.1.4.1.248.12.2.270.10.1 |
hm2AgentStaticNeighbourAddressType. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.2.270.10.1.1 |
hm2AgentStaticNeighbourAddress. InetAddress .1.3.6.1.4.1.248.12.2.270.10.1.2 |
hm2AgentStaticNeighbourPhysAddress.rw PhysAddress .1.3.6.1.4.1.248.12.2.270.10.1.3 |
hm2AgentStaticNeighbourIfIndex.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.12.2.270.10.1.4 |
hm2AgentStaticNeighbourRowStatusThe status of this entry. Setting this object destroy will remove the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.12.2.270.10.1.5 |
hm2AgentDynamicNeighbourTable. SEQUENCE OF Hm2AgentDynamicNeighbourEntry .1.3.6.1.4.1.248.12.2.270.11 |
hm2AgentDynamicNeighbourEntry. Hm2AgentDynamicNeighbourEntry .1.3.6.1.4.1.248.12.2.270.11.1 |
hm2AgentDynamicNeighbourAddressType. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.12.2.270.11.1.1 |
hm2AgentDynamicNeighbourAddress. InetAddress .1.3.6.1.4.1.248.12.2.270.11.1.2 |
hm2AgentDynamicNeighbourPhysAddress.ro PhysAddress .1.3.6.1.4.1.248.12.2.270.11.1.3 |
hm2AgentDynamicNeighbourIfIndex.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.248.12.2.270.11.1.4 |
hm2AgentDynamicNeighbourAction.rw Enumeration .1.3.6.1.4.1.248.12.2.270.11.1.5 |
hm2AgentRoutingSNMPExtensionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280 |
hm2AgentIpHelperTableFullErrorReturnThe maximum number of IP helper entries has been reached OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.1 |
hm2AgentIpHelperInvalidServerAddrErrorReturnInvalid IP server address. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.2 |
hm2AgentRouterOspfDependenciesNotMetCannot modify OSPF admin state on this interface. Set primary IP address. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.3 |
hm2AgentRouterOspfRangeTableFullErrorReturnThe maximum number of area-range entries has been reached. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.4 |
hm2AgentRouterOspfVirtNbrTableFullErrorReturnThe maximum number of virtual neighbor entries has been reached. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.5 |
hm2AgentRouterRIPDependenciesNotMetCannot modify RIP admin state on this interface. Set primary IP address. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.8 |
hm2AgentIpHelperInvalidUdpPortErrorReturnInvalid UDP port. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.9 |
hm2AgentStaticNeighbourTableFullErrorReturnStatic Neighbour Table is full. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.10 |
hm2AgentSecondaryAddrNoPrimaryErrorReturnCannot add the secondary IP address because the interface has no primary IP address. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.11 |
hm2AgentSecondaryAddrDifferentPrimaryErrorReturnThe secondary IP address must be different from the primary IP address. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.12 |
hm2AgentSecondaryAddrWrongIpClassErrorReturnThe network number of the secondary IP address is not valid to be used on a routing interface. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.13 |
hm2AgentSecondaryAddrWrongSubnetErrorReturnAll IP addresses on the interface must be from different subnets. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.14 |
hm2AgentSecondaryAddrMaxIntfEntriesErrorReturnThe maximum number of secondary IP addresses on the interface has been reached. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.15 |
hm2AgentSecondaryAddrMaxSystemEntriesErrorReturnThe maximum number of IP addresses on the system has been reached. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.16 |
hm2AgentSecondaryAddrStaticRouteErrorReturnThe secondary IP address is same as the next hop address of a static route. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.17 |
hm2AgentSecondaryAddrStaticARPErrorReturnThe secondary IP address is same as a static ARP entry. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.18 |
hm2AgentSecondaryAddrAbsentEntryErrorReturnThe secondary IP address is not configured on the interface. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.19 |
hm2AgentPrimaryAddrWrongIpClassErrorReturnThe primary IP address is out of the allowed IP class. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.20 |
hm2AgentPrimaryAddrConflictErrorReturnThe primary IP address conflicts with another IP address on a routing interface. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.21 |
hm2AgentPrimaryAddrStaticRouteErrorReturnThe primary IP address is same as the next hop address of a static route. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.22 |
hm2AgentPrimaryAddrStaticARPErrorReturnThe primary IP address is same as a static ARP entry. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.23 |
hm2AgentPrimaryAddrExistingSecondaryErrorReturnThe primary IP address cannot be changed because the interface has secondary IP addresses configured. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.24 |
hm2AgentPrimaryAddrNetworkConflictErrorReturnThe primary IP address conflicts with the management IP address. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.25 |
hm2AgentPrimaryAddrRoutingTableFullErrorReturnThe primary IP address cannot be added because there are no free entries in the routing table. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.26 |
hm2AgentDstAddrHostBitSetErrorReturnThe route cannot be added. Host bits must not be set in the destination. Network address is {0}. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.27 |
hm2AgentSamePrefRouteErrorReturnRoute cannot be added because reject route and next hop route cannot share the same preference. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.28 |
hm2AgentVrrpAssoIpAddrRowStatusInconsistentAddressThe virtual address does not matching the current interface address configuration. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.29 |
hm2AgentVrrpAssoIpAddrRowStatusInvalidAddressThe virtual address is not valid with the current interface address configuration. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.30 |
hm2AgentVrrpAssoIpAddrRowStatusUnknownVRIDUnknown virtual router id. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.31 |
hm2AgentSwitchIpRouterDiscMinMaxAdvtIntErrorRtrnMin advertisement interval is bigger then max advertisement interval. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.32 |
hm2AgentSwitchIpRouterDiscLifeTimeMaxAdvIntErrorRtrnMax advertisement interval is bigger then advertisement life time. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.33 |
hm2AgentSwitchIpIcmpRateLimitExceedingRatioErrorReturnRate limit ratio exceeds 100 packets per second. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.34 |
hm2AgentRouterOspfMaxAreaErrorReturnThe maximum number of OSPF areas has been reached. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.35 |
hm2AgentospfRouterIdChangeOSPF must be disabled to change the router ID. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.36 |
hm2AgentOspfRedistDistListPlease add a redistribute list. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.37 |
hm2AgentOspfDefaultAreaDeleteErrorReturnThe default area cannot be deleted. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.38 |
hm2AgentLocalArpDeleteErrorReturnLocal ARP entries cannot be deleted. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.39 |
hm2AgentDynamicVlanRoutingErrorReturnDynamic VLANs cannot be used for routing interfaces. OBJECT IDENTIFIER .1.3.6.1.4.1.248.12.2.280.40 |