RIPv2-MIB
The MIB module to describe the RIP2 Version 2 Protocol
Main OID:
rip2.1.3.6.1.4.1.727.7.2.1.23
33
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
rip2The MIB module to describe the RIP2 Version 2 Protocol MODULE-IDENTITY .1.3.6.1.4.1.727.7.2.1.23 |
rip2Globals OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.23.1 |
rip2GlobalRouteChangesThe number of route changes made to the IP Route
Database by RIP. This does not include the refresh
of a route's age.ro Counter32 .1.3.6.1.4.1.727.7.2.1.23.1.1 |
rip2GlobalQueriesThe number of responses sent to RIP queries
from other systems.ro Counter32 .1.3.6.1.4.1.727.7.2.1.23.1.2 |
rip2IfStatTableA list of subnets which require separate
status monitoring in RIP. SEQUENCE OF Rip2IfStatEntry .1.3.6.1.4.1.727.7.2.1.23.2 |
rip2IfStatEntryA Single Routing Domain in a single Subnet. Rip2IfStatEntry .1.3.6.1.4.1.727.7.2.1.23.2.1 |
rip2IfStatAddressThe IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order.ro IpAddress .1.3.6.1.4.1.727.7.2.1.23.2.1.1 |
rip2IfStatRcvBadPacketsThe number of RIP response packets received by
the RIP process which were subsequently discarded
for any reason (e.g. a version 0 packet, or an
unknown command type).ro Counter32 .1.3.6.1.4.1.727.7.2.1.23.2.1.2 |
rip2IfStatRcvBadRoutesThe number of routes, in valid RIP packets,
which were ignored for any reason (e.g. unknown
address family, or invalid metric).ro Counter32 .1.3.6.1.4.1.727.7.2.1.23.2.1.3 |
rip2IfStatSentUpdatesThe number of triggered RIP updates actually
sent on this interface. This explicitly does
NOT include full updates sent containing new
information.ro Counter32 .1.3.6.1.4.1.727.7.2.1.23.2.1.4 |
rip2IfStatStatusWriting invalid has the effect of deleting
this interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.727.7.2.1.23.2.1.5 |
rip2IfConfTableA list of subnets which require separate
configuration in RIP. SEQUENCE OF Rip2IfConfEntry .1.3.6.1.4.1.727.7.2.1.23.3 |
rip2IfConfEntryA Single Routing Domain in a single Subnet. Rip2IfConfEntry .1.3.6.1.4.1.727.7.2.1.23.3.1 |
rip2IfConfAddressThe IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order.ro IpAddress .1.3.6.1.4.1.727.7.2.1.23.3.1.1 |
rip2IfConfDomainValue inserted into the Routing Domain field
of all RIP packets sent on this interface.rwobsolete RouteTag .1.3.6.1.4.1.727.7.2.1.23.3.1.2 |
rip2IfConfAuthTypeThe type of Authentication used on this
interface.rw Enumeration .1.3.6.1.4.1.727.7.2.1.23.3.1.3 |
rip2IfConfAuthKeyThe value to be used as the Authentication Key
whenever the corresponding instance of
rip2IfConfAuthType has a value other than
noAuthentication. A modification of the corresponding
instance of rip2IfConfAuthType does not modify
the rip2IfConfAuthKey value. If a string shorter
than 16 octets is supplied, it will be left-
justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.727.7.2.1.23.3.1.4 |
rip2IfConfSendWhat the router sends on this interface.
ripVersion1 implies sending RIP updates compliant
with RFC 1058. rip1Compatible implies
broadcasting RIP-2 updates using RFC 1058 route
subsumption rules. ripVersion2 implies
multicasting RIP-2 updates. ripV1Demand indicates
the use of Demand RIP on a WAN interface under RIP
Version 1 rules. ripV2Demand indicates the use of
Demand RIP on a WAN interface under Version 2 rules.rw Enumeration .1.3.6.1.4.1.727.7.2.1.23.3.1.5 |
rip2IfConfReceiveThis indicates which version of RIP updates
are to be accepted. Note that rip2 and
rip1OrRip2 implies reception of multicast
packets.rw Enumeration .1.3.6.1.4.1.727.7.2.1.23.3.1.6 |
rip2IfConfDefaultMetricThis variable indicates the metric that is to
be used for the default route entry in RIP updates
originated on this interface. A value of zero
indicates that no default route should be
originated; in this case, a default route via
another router may be propagated.rw INTEGER ( 0..15 ) .1.3.6.1.4.1.727.7.2.1.23.3.1.7 |
rip2IfConfStatusWriting invalid has the effect of deleting
this interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.727.7.2.1.23.3.1.8 |
rip2IfConfSrcAddressThe IP Address this system will use as a source
address on this interface. If it is a numbered
interface, this MUST be the same value as
rip2IfConfAddress. On unnumbered interfaces,
it must be the value of rip2IfConfAddress for
some interface on the system.rw IpAddress .1.3.6.1.4.1.727.7.2.1.23.3.1.9 |
rip2PeerTableA list of RIP Peers. SEQUENCE OF Rip2PeerEntry .1.3.6.1.4.1.727.7.2.1.23.4 |
rip2PeerEntryInformation regarding a single routing peer. Rip2PeerEntry .1.3.6.1.4.1.727.7.2.1.23.4.1 |
rip2PeerAddressThe IP Address that the peer is using as its source
address. Note that on an unnumbered link, this may
not be a member of any subnet on the system.ro IpAddress .1.3.6.1.4.1.727.7.2.1.23.4.1.1 |
rip2PeerDomainThe value in the Routing Domain field in RIP
packets received from the peer. As domain suuport
is deprecated, this must be zero.ro RouteTag .1.3.6.1.4.1.727.7.2.1.23.4.1.2 |
rip2PeerLastUpdateThe value of sysUpTime when the most recent
RIP update was received from this system.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.727.7.2.1.23.4.1.3 |
rip2PeerVersionThe RIP version number in the header of the
last RIP packet received.ro INTEGER ( 0..255 ) .1.3.6.1.4.1.727.7.2.1.23.4.1.4 |
rip2PeerRcvBadPacketsThe number of RIP response packets from this
peer discarded as invalid.ro Counter32 .1.3.6.1.4.1.727.7.2.1.23.4.1.5 |
rip2PeerRcvBadRoutesThe number of routes from this peer that were
ignored because the entry format was invalid.ro Counter32 .1.3.6.1.4.1.727.7.2.1.23.4.1.6 |
rip2Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.23.5 |
rip2Groups OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.23.5.1 |
rip2Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.727.7.2.1.23.5.2 |