HM2-TIMESYNC-MIB
AI MIB Summary
The HM2-TIMESYNC-MIB enables monitoring and configuration of Precision Time Protocol (PTP) synchronization states, clock accuracy, and time source status on Hirschmann (Belden) managed network switches. It provides visibility into specific time synchronization metrics such as grandmaster clock selection, delay measurement, and synchronization lock status to ensure deterministic network timing.
Hirschmann Time Sync MIB. Copyright (C) 2011. All Rights Reserved.
Main OID:
hm2TimeSyncMib.1.3.6.1.4.1.248.11.50
172
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
172 total| Object Name |
|---|
hm2TimeSyncMibHirschmann Time Sync MIB. Copyright (C) 2011. All Rights Reserved. MODULE-IDENTITY .1.3.6.1.4.1.248.11.50 |
hm2TimeSyncMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.0 |
hm2Ptp2SynchronizationChangeThis notification is sent if the PTP synchronization status is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.248.11.50.0.1 |
hm2SntpClientSynchronizationChangeTrapThis notification is sent if the SNTP synchronization status (hm2SntpClientStatus) is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.248.11.50.0.10 |
hm2TimeSyncMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1 |
hm2SystemTimeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.1 |
hm2SystemUtcTimeTime measured in seconds since 00:00:00 UTC, January 1, 1970. The clock of the device may be set using this variable.rw HmTimeSeconds1970 (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.1.1 |
hm2SystemTimeSourceShows the source of the system time.ro Enumeration .1.3.6.1.4.1.248.11.50.1.1.2 |
hm2SystemLocalTimeThe current local time. This includes the timezone offset and if supported summertime offset. Measured in seconds since 00:00:00, January 1, 1970.rw HmTimeSeconds1970 (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.1.3 |
hm2SystemLocalOffsetThe difference between the local timezone and UTC in minutes.rw Integer32 (-780..840) .1.3.6.1.4.1.248.11.50.1.1.4 |
hm2SntpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.2 |
hm2SntpServerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.2.1 |
hm2SntpServerAdminStateEnables/disables SNTP server admin mode.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.2.1.1 |
hm2SntpServerPortThe local port number used to listen for client requests.rw InetPortNumber .1.3.6.1.4.1.248.11.50.1.2.1.2 |
hm2SntpServerOnlyIfSyncThe SNTP server is enabled only if synchronized to another external time reference. (e.g. NTP or PTP).rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.2.1.3 |
hm2SntpServerStatusOperational status of the SNTP server.ro Enumeration .1.3.6.1.4.1.248.11.50.1.2.1.4 |
hm2SntpServerBroadcastGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.2.2 |
hm2SntpServerBroadcastAdminStateEnables/disables SNTP server broadcast admin mode.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.2.2.1 |
hm2SntpServerBroadcastAddrTypeAddress type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.2.2.2 |
hm2SntpServerBroadcastAddrDestination address for SNTP broadcast or multicast.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.2.2.3 |
hm2SntpServerBroadcastPortThe port number to send the broadcast packets to the clients.rw InetPortNumber .1.3.6.1.4.1.248.11.50.1.2.2.4 |
hm2SntpServerBroadcastIntervalInterval of SNTP broadcast messages send in seconds.rw Integer32 .1.3.6.1.4.1.248.11.50.1.2.2.5 |
hm2SntpServerBroadcastVlanTableThis table contains all VLANs used for SNTP server broadcast or multicast messages. SEQUENCE OF Hm2SntpServerBroadcastVlanEntry .1.3.6.1.4.1.248.11.50.1.2.2.10 |
hm2SntpServerBroadcastVlanEntryThe SNTP broadcast server VLAN objects. Hm2SntpServerBroadcastVlanEntry .1.3.6.1.4.1.248.11.50.1.2.2.10.1 |
hm2SntpServerBroadcastVlanVLAN used for SNTP server broadcast or multicast messages.ro Integer32 .1.3.6.1.4.1.248.11.50.1.2.2.10.1.1 |
hm2SntpServerBroadcastVlanRowStatusIndicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can by changed while the status is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.2.2.10.1.2 |
hm2SntpClientGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.2.3 |
hm2SntpClientAdminStateEnables/disables the SNTP client admin mode.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.2.3.1 |
hm2SntpClientOperatingModeEnables/disables SNTP client operating mode. In 'unicast' mode, the client sends a request to a designated unicast server and expects a reply from that server. In 'broadcast' client mode, it sends no request and waits for a broadcast from one or more broadcast servers.rw Enumeration .1.3.6.1.4.1.248.11.50.1.2.3.2 |
hm2SntpClientDisableAfterSyncWhen set to 'enable' the SNTP client is disabled after the device is synchronized the first time successfully to a SNTP server.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.2.3.3 |
hm2SntpClientRequestIntervalSNTP client request interval in seconds.rw Integer32 .1.3.6.1.4.1.248.11.50.1.2.3.4 |
hm2SntpClientStatusOverall operational status of the SNTP client.ro Enumeration .1.3.6.1.4.1.248.11.50.1.2.3.5 |
hm2SntpClientBroadcastRecvTimeoutTime in seconds after the client in broadcast client mode will change the status from 'synchronizedToRemoteServer' to 'notSynchronized' if no broadcast packets are received.rw Integer32 .1.3.6.1.4.1.248.11.50.1.2.3.6 |
hm2SntpClientServerAddrTableThis table contains objects to configure SNTP client connections. SEQUENCE OF Hm2SntpClientServerAddrEntry .1.3.6.1.4.1.248.11.50.1.2.3.10 |
hm2SntpClientServerAddrEntryThe SNTP client connection objects. Hm2SntpClientServerAddrEntry .1.3.6.1.4.1.248.11.50.1.2.3.10.1 |
hm2SntpClientServerIndexIndex for server table. Integer32 .1.3.6.1.4.1.248.11.50.1.2.3.10.1.1 |
hm2SntpClientServerAddrTypeAddress type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.2.3.10.1.2 |
hm2SntpClientServerAddrThe address of the external time server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.2.3.10.1.3 |
hm2SntpClientServerPortThe port number of the external time server.rw InetPortNumber .1.3.6.1.4.1.248.11.50.1.2.3.10.1.4 |
hm2SntpClientServerDescrThe description of the server configured.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.2.3.10.1.5 |
hm2SntpClientServerStatusStatus of the SNTP client - server connection.ro HmSntpClientServerStatus .1.3.6.1.4.1.248.11.50.1.2.3.10.1.6 |
hm2SntpClientServerRowStatusIndicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can by changed while the status is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.2.3.10.1.7 |
hm2NtpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.3 |
hm2NtpGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.3.1 |
hm2NtpOperatingStateOperational status of the NTP server/client.ro Enumeration .1.3.6.1.4.1.248.11.50.1.3.1.1 |
hm2NtpServerGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.3.2 |
hm2NtpServerConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.3.2.1 |
hm2NtpServerAdminStateEnables/disables the NTP server.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.3.2.1.1 |
hm2NtpServerOperatingModeNTP server operating mode.rw Enumeration .1.3.6.1.4.1.248.11.50.1.3.2.1.2 |
hm2NtpServerLocalClockStratumThe stratum to be used for the case that the server is only synchronized to the local clockrw Integer32 .1.3.6.1.4.1.248.11.50.1.3.2.1.3 |
hm2NtpClientGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.3.3 |
hm2NtpClientConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.3.3.1 |
hm2NtpClientAdminStateEnables/disables the NTP client.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.1.1 |
hm2NtpClientOperatingModeNTP client operating mode.rw Enumeration .1.3.6.1.4.1.248.11.50.1.3.3.1.2 |
hm2NtpClientServerAddrTableThis table contains variables for each interface of the switch. SEQUENCE OF Hm2NtpClientServerAddrEntry .1.3.6.1.4.1.248.11.50.1.3.3.4 |
hm2NtpClientServerAddrEntryThis entry contains variables for each interface of the switch. Hm2NtpClientServerAddrEntry .1.3.6.1.4.1.248.11.50.1.3.3.4.1 |
hm2NtpClientServerIndexIndex for Server table. Integer32 .1.3.6.1.4.1.248.11.50.1.3.3.4.1.1 |
hm2NtpClientServerAddressTypeAddress type for external time server. Currently, only IPv4 and DNS is supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.4.1.2 |
hm2NtpClientServerAddressThe address of the external time server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.4.1.3 |
hm2NtpClientServerPortThe port number of the external time server. Zero is not allowed as port number.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.4.1.4 |
hm2NtpClientServerInitialBurstThe initial burst is intended to speed up the initial synchronization. Use with caution as it can cause a overload situation on the server.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.4.1.5 |
hm2NtpClientServerBurstThe burst mode can be used to increase the precision on links with high jitter e.g. GSM/UMTS linksrw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.4.1.6 |
hm2NtpClientServerPreferThe prefer flag can be used to mark the peer as preferred. Among a set of correctly operating peers, this one will be chosen as synchronization source.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.3.3.4.1.7 |
hm2NtpClientServerStatusStatus of the NTP client server connection.ro Enumeration .1.3.6.1.4.1.248.11.50.1.3.3.4.1.10 |
hm2NtpClientServerRowStatusIndicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can be changed while the status is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.3.3.4.1.11 |
hm2NtpClientListenAddrTableClient table. SEQUENCE OF Hm2NtpClientListenAddrEntry .1.3.6.1.4.1.248.11.50.1.3.3.5 |
hm2NtpClientListenAddrEntryClient entry. Hm2NtpClientListenAddrEntry .1.3.6.1.4.1.248.11.50.1.3.3.5.1 |
hm2NtpClientListenAddrIndexIndex for server table. Integer32 .1.3.6.1.4.1.248.11.50.1.3.3.5.1.1 |
hm2NtpClientListenAddrAddressTypeAddress type for external time server. Currently, only IPv4 and DNS is supported.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.5.1.2 |
hm2NtpClientListenAddrAddressThe address of the external time server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.5.1.3 |
hm2NtpClientListenAddrPortThe port number of the external time server. Zero is not allowed as port number.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.248.11.50.1.3.3.5.1.4 |
hm2NtpClientListenAddrStatusStatus of the NTP client server connection.ro Enumeration .1.3.6.1.4.1.248.11.50.1.3.3.5.1.10 |
hm2NtpClientListenAddrRowStatusIndicates the status of an entry in this table, and is used to create/delete entries. Objects within this table can by changed while the status is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.3.3.5.1.11 |
hm2PtpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.4 |
hm2PtpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.4.1 |
hm2PtpEnableEnable or disable the Precision Time Protocol (PTP) on this node.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.4.1.1 |
hm2PtpClockModeThis members value shall indicate which clock mode is used.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.1.2 |
hm2PtpProfileConfigures PTP parameters to a specific profile. Setting the object to user-defined (1) has no effect.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.1.3 |
hm2PtpIsSynchronizedIf the clock is synchronized to the current Master this object is set to true. Otherwise it is set to false. The clock sets this object to true, if the offset (ns) to the current Master is less than hm2PtpSyncLowerBound. The clock sets this object to false, if the offset (ns) to the current Master is bigger than hm2PtpSyncUpperBound.ro Enumeration .1.3.6.1.4.1.248.11.50.1.4.1.4 |
hm2PtpSyncLowerBoundThis object defines when the hm2PtpIsSynchronized object is set to true. If the absolute value of the offset is smaller than hm2PtpSyncLowerBound, the hm2PtpIsSynchronized is set true. The value is interpreted as nanoseconds.rw Integer32 .1.3.6.1.4.1.248.11.50.1.4.1.5 |
hm2PtpSyncUpperBoundThis object defines when the hm2PtpIsSynchronized object is set to false. If the absolute value of the offset is bigger than hm2PtpSyncUpperBound, the hm2PtpIsSynchronized is set false. The value is interpreted as nanoseconds.rw Integer32 .1.3.6.1.4.1.248.11.50.1.4.1.6 |
hm2PtpAbsMaxOffsetThis members value shall indicate the absolute value for the maximum offset between its parent and this node. The value is set to zero if the offset is the first time smaller than hm2PtpSyncLowerBound. Offsets bigger than +/-1 second are indicated by the maximum value.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.1.7 |
hm2PtpTimeSecondsCurrent PTP time in PTP timescalero PtpTimeStamp .1.3.6.1.4.1.248.11.50.1.4.1.8 |
hm2PtpManagementIf set to true PTP management via PTP management messages is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.1.9 |
hm2Ptp2Objects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.4.2 |
hm2Ptp2Configuration OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.4.2.1 |
hm2Ptp2TwoStepClockA value of true indicates that this node is a two-step device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.2.1.1 |
hm2Ptp2ClockIdentityThis value is the clock identity of the local clock.ro PtpClockIdentity .1.3.6.1.4.1.248.11.50.1.4.2.1.2 |
hm2Ptp2ClockQualityClock quality of the local clock.ro PtpClockQuality .1.3.6.1.4.1.248.11.50.1.4.2.1.3 |
hm2Ptp2ClockClassFirst octet of hm2Ptp2ClockQuality. This represents the clock class of the local clock.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.4 |
hm2Ptp2ClockAccuracySecond octet of hm2Ptp2ClockQuality. This represents the clock accuracy of the local clock.ro Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.1.5 |
hm2Ptp2ClockVarianceLast two octets of hm2Ptp2ClockQuality. This represents the clock variance of the local clock.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.6 |
hm2Ptp2Priority1Priority 1 value of the local clockrw Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.7 |
hm2Ptp2Priority2Priority 2 value of the local clockrw Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.8 |
hm2Ptp2DomainNumberPTP domain number of the local clock.rw Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.9 |
hm2Ptp2StepsRemovedThe value of hm2Ptp2StepsRemoved is the number of communication paths traversed between the local clock and the grandmaster clock.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.10 |
hm2Ptp2OffsetFromMasterCurrent value of the time difference between master and slave measured by this clock.ro PtpTimeInterval .1.3.6.1.4.1.248.11.50.1.4.2.1.11 |
hm2Ptp2MeanPathDelayCurrent value of the mean propagation time (e2e-delay) between Master and Slave. This is only valid if hm2Ptp2DelayMechanism is set to e2e on the current slave port.ro PtpTimeInterval .1.3.6.1.4.1.248.11.50.1.4.2.1.12 |
hm2Ptp2ParentPortIdentityThe port identity value of the port on the master that issues the synchronization messages used to synchronize this clock.ro PtpPortIdentity .1.3.6.1.4.1.248.11.50.1.4.2.1.13 |
hm2Ptp2ParentStatsA value of True indicates that the objects hm2Ptp2ObservedParentOffsetScaledLogVariance and hm2Ptp2ObservedParentClockPhaseChangeRate are valid.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.2.1.14 |
hm2Ptp2ObservedParentOffsetScaledLogVarianceEstimate of the parent clocks PTP variance observed by this clock.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.15 |
hm2Ptp2ObservedParentClockPhaseChangeRateEstimate of the phase change rate (drift) observed by this clock.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.16 |
hm2Ptp2GrandmasterIdentityClockIdentity of the Grandmaster clock synchronizing this clock.ro PtpClockIdentity .1.3.6.1.4.1.248.11.50.1.4.2.1.17 |
hm2Ptp2GrandmasterClockQualityClockQuality of the Grandmaster clock synchronizing this clock.ro PtpClockQuality .1.3.6.1.4.1.248.11.50.1.4.2.1.18 |
hm2Ptp2GrandmasterClockClassFirst octet of hm2Ptp2GrandmasterClockQuality. This represents the grand masters clock class.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.19 |
hm2Ptp2GrandmasterClockAccuracySecond octet of hm2Ptp2GrandmasterClockAccuracy. This represents the grand masters clock accuracy.ro Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.1.20 |
hm2Ptp2GrandmasterClockVarianceLast two octets of hm2Ptp2GrandmasterClockQuality. This represents the grand masters clock variance.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.21 |
hm2Ptp2GrandmasterPriority1Priority 1 value of the grand master clock.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.22 |
hm2Ptp2GrandmasterPriority2Priority 2 value of the grand master clock.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.1.23 |
hm2Ptp2CurrentUtcOffsetCurrent difference between the PTP timescale (TAI) and UTC in seconds.rw Integer32 (-32768..32767) .1.3.6.1.4.1.248.11.50.1.4.2.1.24 |
hm2Ptp2CurrentUtcOffsetValidA value of True indicates that the hm2Ptp2CurrentUtcOffset is known to be correct.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.2.1.25 |
hm2Ptp2Leap59A value of true indicates that the last minute of the current UTC day contains 59 seconds.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.2.1.26 |
hm2Ptp2Leap61A value of true indicates that the last minute of the current UTC day contains 61 seconds.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.2.1.27 |
hm2Ptp2TimeTraceableA value of True indicates that the current time is traceable to a primary reference.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.2.1.28 |
hm2Ptp2FrequencyTraceableA value of True indicates that the frequency determining the timescale is traceable to a primary reference.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.2.1.29 |
hm2Ptp2PtpTimescaleA value of True indicates that the clocks timescale is PTP.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.2.1.30 |
hm2Ptp2TimeSourceThe source of time used by the Grandmaster clock.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.1.31 |
hm2Ptp2PortTableThis table contains variables for each PTP2 port of the switch. SEQUENCE OF Hm2Ptp2PortEntry .1.3.6.1.4.1.248.11.50.1.4.2.2 |
hm2Ptp2PortEntryEntry for one port. Hm2Ptp2PortEntry .1.3.6.1.4.1.248.11.50.1.4.2.2.1 |
hm2Ptp2PortEnableEnable or disable the sending and receiving / processing of PTP synchronization messages.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.4.2.2.1.1 |
hm2Ptp2PortStateState of the PTP2 port instance.ro Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.2.1.2 |
hm2Ptp2LogDelayReqIntervalLogarithm to the base of 2 of the minimum DelayRequest interval used to measure the e2e-delay.ro Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.3 |
hm2Ptp2PeerMeanPathDelayIf hm2Ptp2DelayMechanism is set to p2p this value is an estimate of the current one-way propagation delay (p2p-delay).ro PtpTimeInterval .1.3.6.1.4.1.248.11.50.1.4.2.2.1.4 |
hm2Ptp2LogAnnounceIntervalLogarithm to the base of 2 of the mean announce interval.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.2.1.5 |
hm2Ptp2AnnounceReceiptTimeoutAnnounce receipt timeout in multiples of hm2Ptp2LogAnnounceInterval.rw Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.6 |
hm2Ptp2LogSyncIntervalLogarithm to the base of 2 of the mean synchronization interval.rw Hm2Ptp2LogSyncIntervalTc .1.3.6.1.4.1.248.11.50.1.4.2.2.1.7 |
hm2Ptp2DelayMechanismThis value indicates the propagation delay measuring option used by this port.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.2.1.8 |
hm2Ptp2LogPdelayReqIntervalLogarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay).rw Hm2Ptp2LogPdelayReqIntervalTc .1.3.6.1.4.1.248.11.50.1.4.2.2.1.9 |
hm2Ptp2VersionNumberPTP version in use on this port (always ptpVersion2).rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.2.1.10 |
hm2Ptp2NetworkProtocolCurrent configured network transport protocol of this port.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.2.1.11 |
hm2Ptp2V1CompatibilityIf set to on all PTPv2 messages will be padded to the length of a PTPv1 frame. This is required by some hardware.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.2.2.1.12 |
hm2Ptp2DelayAsymmetryAsymmetry of the link connected to this port in nanoseconds. The hm2Ptp2DelayAsymmetry is positive when the master-to-slave propagation time is longer than the slave-to-master propagation time.rw Integer32(-2000000000..2000000000) .1.3.6.1.4.1.248.11.50.1.4.2.2.1.13 |
hm2Ptp2PortCapabilityThis object shows the capability of the ptp port.ro Bits .1.3.6.1.4.1.248.11.50.1.4.2.2.1.14 |
hm2Ptp2VlanIDVLAN in which PTP packets are send. With a value of -1 all packets are send untaggedrw Integer32(-1..4042) .1.3.6.1.4.1.248.11.50.1.4.2.2.1.15 |
hm2Ptp2VlanPriorityVLAN priority of tagged ptp packetsrw Integer32 .1.3.6.1.4.1.248.11.50.1.4.2.2.1.16 |
hm2Ptp2TCObjects OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.4.3 |
hm2Ptp2TCConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.4.3.1 |
hm2Ptp2TCClockIdentityThis value is the clock identity of the transparent clock.ro PtpClockIdentity .1.3.6.1.4.1.248.11.50.1.4.3.1.1 |
hm2Ptp2TCDelayMechanismConfigures the transparent clock to be either a e2e- or p2p-transparent clock. If supported a value of e2e-optimized sets the clock to e2e mode where delay requests are only forwarded on the port where the current Master (hm2Ptp2TCCurrentMaster) is connected.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.3.1.2 |
hm2Ptp2TCPrimaryDomainPTP domain number of the primary syntonization domain.rw Integer32 .1.3.6.1.4.1.248.11.50.1.4.3.1.3 |
hm2Ptp2TCSyntonizedA value of true indicates that the syntonization of the transparent clock is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.3.1.4 |
hm2Ptp2TCNetworkProtocolCurrent configured network transport protocol of the transparent clock.rw Enumeration .1.3.6.1.4.1.248.11.50.1.4.3.1.5 |
hm2Ptp2TCCurrentMasterThe port identity value of the port on the master that issues the synchronization messages used to syntonize/synchronize this clock.ro PtpPortIdentity .1.3.6.1.4.1.248.11.50.1.4.3.1.6 |
hm2Ptp2TCMultiDomainModeIf set to false, PTP messages from domains other than hm2Ptp2TCPrimaryDomain are ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.3.1.7 |
hm2Ptp2TCSyncLocalClockEnable synchronisation of the local clock (TC hybrid mode). This requires syntonization to be enabled. All transparent clock operations are still done based on the syntonized clock.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.3.1.8 |
hm2Ptp2TCOffsetFromMasterCurrent value of the time difference between Master and this clock measured by this clock. This object is only valid if hm2Ptp2TCSyncLocalClock is set to true.ro PtpTimeInterval .1.3.6.1.4.1.248.11.50.1.4.3.1.9 |
hm2Ptp2TCMeanPathDelayCurrent value of the mean propagation time (e2e-delay) between Master and Slave. This object is only valid for e2e-transparent-clock and hm2Ptp2TCSyncLocalClock is set to true.ro PtpTimeInterval .1.3.6.1.4.1.248.11.50.1.4.3.1.10 |
hm2Ptp2TCVlanIDVLAN in which PTP packets are send. With a value of -1 all packets are send untagged.rw Integer32(-1..4095) .1.3.6.1.4.1.248.11.50.1.4.3.1.11 |
hm2Ptp2TCVlanPriorityVLAN priority of tagged PTP packets.rw Integer32 .1.3.6.1.4.1.248.11.50.1.4.3.1.12 |
hm2Ptp2TCCapabilityThis object shows the capability of the TC.ro Bits .1.3.6.1.4.1.248.11.50.1.4.3.1.13 |
hm2Ptp2TCPortTableThis table contains variables for each PTP2 TC port of the switch. SEQUENCE OF Hm2Ptp2TCPortEntry .1.3.6.1.4.1.248.11.50.1.4.3.2 |
hm2Ptp2TCPortEntryEntry for one port. Hm2Ptp2TCPortEntry .1.3.6.1.4.1.248.11.50.1.4.3.2.1 |
hm2Ptp2TCPortEnableEnable or disable the sending and receiving / processing of PTP synchronization messages.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.4.3.2.1.1 |
hm2Ptp2TCLogPdelayReqIntervalLogarithm to the base of 2 of the minimum PDelay Request interval (used for p2p-delay).rw Hm2Ptp2LogPdelayReqIntervalTc .1.3.6.1.4.1.248.11.50.1.4.3.2.1.2 |
hm2Ptp2TCFaultyTrue if port is in Faulty state.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.11.50.1.4.3.2.1.3 |
hm2Ptp2TCPeerMeanPathDelayThis value is an estimate of the current one way propagation delay of a p2p-transparent-clock.ro PtpTimeInterval .1.3.6.1.4.1.248.11.50.1.4.3.2.1.4 |
hm2Ptp2TCDelayAsymmetryAsymmetry of the link connected to this port in nanoseconds. The hm2Ptp2TCDelayAsymmetry is positive when the master-to-slave propagation time is longer than the slave-to-master propagation time.rw Integer32(-2000000000..2000000000) .1.3.6.1.4.1.248.11.50.1.4.3.2.1.5 |
hm2IrigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.1.5 |
hm2IrigAdminStatusEnables/disables the IRIG-B output.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.5.1 |
hm2IrigModeSet the IRIG Mode, allowed values: (See https://wsmrc2vger.wsmr.army.mil/rcc/manuals/200-04/TT-45.pdf) irig-b000 (0) - Mode IRIG B000, BCDtoy, CF, SBS irig-b001 (1) - Mode IRIG B001, BCDtoy, CF irig-b002 (2) - Mode IRIG B002, BCDtoy irig-b003 (3) - Mode IRIG B003, BCDtoy, SBS irig-b004 (4) - Mode IRIG B004, BCDtoy, BCDyear, CF, SBS irig-b005 (5) - Mode IRIG B005, BCDtoy, BCDyear, CF irig-b006 (6) - Mode IRIG B006, BCDtoy, BCDyear irig-b007 (7) - Mode IRIG B007, BCDtoy, BCDyear, SBS with BCDtoy: binary coded decimal time of year BCDyear: binary coded decimal year CF: control functions SBS: straight binary seconds of day only modes b002,B003,B006 and b007 are supported.rw Enumeration .1.3.6.1.4.1.248.11.50.1.5.2 |
hm2IrigPpsAdminStatusEnables/disables the pps output.rw HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.5.3 |
hm2IrigTimeModeDefine the IRIG-B time base (UTC or local).rw Enumeration .1.3.6.1.4.1.248.11.50.1.5.4 |
hm2IrigOperStatusCurrent operational status of the IRIG-B output.ro HmEnabledStatus (HM2-TC-MIB) .1.3.6.1.4.1.248.11.50.1.5.5 |
hm2IrigTimeQualityCurrent IRIG-B time quality according to IEEE 1344.ro Enumeration .1.3.6.1.4.1.248.11.50.1.5.6 |
hm2TimeSyncMibSNMPExtensionGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.3 |
hm2TimeSyncSystemTimeSESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.3.1 |
hm2TimeSyncSntpSESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.3.2 |
hm2TimeSyncSntpSESIpv4PortNumberPairInUseIndicates that the given IPv4 address / port number combination is already in use. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.3.2.1 |
hm2TimeSyncSntpSESDnsPortNumberPairInUseIndicates that the given DNS name / port number combination is already in use. OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.3.2.2 |
hm2TimeSyncNtpSESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.3.3 |
hm2TimeSyncPtpSESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.3.4 |
hm2TimeSyncIrigSESGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.11.50.3.5 |