HIRSCHMANN-MMP4-ROUTING-MIB
AI MIB Summary
The HIRSCHMANN-MMP4-ROUTING-MIB enables monitoring and management of Layer 3 routing tables, protocol states, and forwarding metrics on Hirschmann Platform4 network devices. It provides access to specific routing instance configurations, neighbor adjacency states, and interface routing statistics for the Hirschmann Private Platform4 architecture.
The Hirschmann Private Platform4 Routing MIB definitions for Platform devices.
Main OID:
hmPlatform4Routing.1.3.6.1.4.1.248.15.2
176
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
176 total| Object Name |
|---|
hmPlatform4RoutingThe Hirschmann Private Platform4 Routing MIB definitions for Platform devices. MODULE-IDENTITY .1.3.6.1.4.1.248.15.2 |
hmAgentSwitchArpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.1 |
hmAgentSwitchArpAgeoutTimeConfigures the ARP entry ageout time in seconds.
Allowable range: 15-21600rw Integer32 .1.3.6.1.4.1.248.15.2.1.1 |
hmAgentSwitchArpResponseTimeConfigures the ARP request response timeout in seconds.
Allowable range: 1-10rw Integer32 .1.3.6.1.4.1.248.15.2.1.2 |
hmAgentSwitchArpMaxRetriesConfigures the ARP count of maximum request for retries.
Allowable range: 0-10rw Integer32 .1.3.6.1.4.1.248.15.2.1.3 |
hmAgentSwitchArpCacheSizeConfigures the ARP maximum number of entries in the cache.
Allowable range is platform-specific.rw Integer32 .1.3.6.1.4.1.248.15.2.1.4 |
hmAgentSwitchArpDynamicRenewThis indicates the current setting of ARP dynamic renew mode.rw Enumeration .1.3.6.1.4.1.248.15.2.1.5 |
hmAgentSwitchArpTotalEntryCountCurrentCurrent number of entries in the ARP cache.ro Gauge32 .1.3.6.1.4.1.248.15.2.1.6 |
hmAgentSwitchArpTotalEntryCountPeakPeak number of entries recorded in the ARP cache over
time. This value is restarted whenever the ARP cache
size is changed.ro Gauge32 .1.3.6.1.4.1.248.15.2.1.7 |
hmAgentSwitchArpStaticEntryCountCurrentCurrent number of configured static ARP entries.ro Gauge32 .1.3.6.1.4.1.248.15.2.1.8 |
hmAgentSwitchArpStaticEntryCountMaxMaximum number of configurable static ARP entries.ro Integer32 .1.3.6.1.4.1.248.15.2.1.9 |
hmAgentSwitchArpTableThis table augments the MIB-II ipNetToMediaTable by providing
per-interface ARP entry information. SEQUENCE OF HmAgentSwitchArpEntry .1.3.6.1.4.1.248.15.2.1.10 |
hmAgentSwitchArpEntryThe entry of the hmAgentSwitchArpTable. HmAgentSwitchArpEntry .1.3.6.1.4.1.248.15.2.1.10.1 |
hmAgentSwitchArpAgeThis defines the time (in seconds) since the ARP entry
was last refreshed. This value is 0 for ARP entries of
type local(1) or static(3), since these entries are
not subject to aging.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.248.15.2.1.10.1.1 |
hmAgentSwitchArpIpAddressThe IP Address assigned to each interface.ro IpAddress .1.3.6.1.4.1.248.15.2.1.10.1.2 |
hmAgentSwitchArpMacAddressThe hardware MAX Address that each interface maps to.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.1.10.1.3 |
hmAgentSwitchArpInterfaceThe Associated IfIndex which identified the ARP Entry.ro Integer32 .1.3.6.1.4.1.248.15.2.1.10.1.4 |
hmAgentSwitchArpTypeThe type of ARP entry.ro Enumeration .1.3.6.1.4.1.248.15.2.1.10.1.5 |
hmAgentSwitchArpStatusThe status of this ARP entry. Setting this object destroy will remove the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.1.10.1.6 |
hmAgentSwitchArpSparseLearnThis indicates the current setting of ARP sparse learn mode.rw Enumeration .1.3.6.1.4.1.248.15.2.1.11 |
hmAgentSwitchIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.2 |
hmAgentSwitchIpRoutingModeAdministratively enables/disables routing on the switch.rw Enumeration .1.3.6.1.4.1.248.15.2.2.1 |
hmAgentSwitchIpVRRPModeAdministratively enables/disables VRRP on the switch.rw Enumeration .1.3.6.1.4.1.248.15.2.2.2 |
hmAgentSwitchIpInterfaceTableThe hmAgentSwitchIpInterfaceTable. SEQUENCE OF HmAgentSwitchIpInterfaceEntry .1.3.6.1.4.1.248.15.2.2.3 |
hmAgentSwitchIpInterfaceEntryThe entry of the hmAgentSwitchIpInterfaceTable. HmAgentSwitchIpInterfaceEntry .1.3.6.1.4.1.248.15.2.2.3.1 |
hmAgentSwitchIpInterfaceIfIndexThe IfIndex associated with this instance.ro Integer32 .1.3.6.1.4.1.248.15.2.2.3.1.1 |
hmAgentSwitchIpInterfaceIpAddressThe IpAddress assigned to this interface. When setting this value,
the value of hmAgentSwitchIpInterfaceNetMask must be set at the same time.rw IpAddress .1.3.6.1.4.1.248.15.2.2.3.1.2 |
hmAgentSwitchIpInterfaceNetMaskThe NetMask assigned to this interface. When setting this value, the
value of hmAgentSwitchIpInterfaceIpAddress must be set at the same time.rw IpAddress .1.3.6.1.4.1.248.15.2.2.3.1.3 |
hmAgentSwitchIpInterfaceClearIpSets the interface's primary IpAddress and NetMask back to 0.0.0.0.
The primary ip address can be removed if and only if there are no
configured secondary addresses.rw Enumeration .1.3.6.1.4.1.248.15.2.2.3.1.4 |
hmAgentSwitchIpInterfaceRoutingModeEnables or disables routing for this interface.rw Enumeration .1.3.6.1.4.1.248.15.2.2.3.1.5 |
hmAgentSwitchIpInterfaceProxyARPModeEnables or disables Proxy ARP for this interface.rw Enumeration .1.3.6.1.4.1.248.15.2.2.3.1.6 |
hmAgentSwitchIpInterfaceMtuValueConfigures the MTU value for this interface. If the value returned is 0
this interface is not enabled for routing. It is not valid to set this
value to 0 if routing is enabled.rw Unsigned32 (0|68..9000) .1.3.6.1.4.1.248.15.2.2.3.1.7 |
hmAgentSwitchIpInterfaceSlotNumThe Slot Number associated with this instance.ro Integer32 .1.3.6.1.4.1.248.15.2.2.3.1.8 |
hmAgentSwitchIpInterfacePortNumThe Port Number associated with this instance.ro Integer32 .1.3.6.1.4.1.248.15.2.2.3.1.9 |
hmAgentSwitchIpInterfaceNetdirectedBCModeEnables or disables netdirected broadcasts for this interface.rw Enumeration .1.3.6.1.4.1.248.15.2.2.3.1.10 |
hmAgentSwitchIpRouterDiscoveryTableThere is no global administrative flag for router discovery. The global
routing flag (hmAgentSwitchIpRoutingMode) will be used for this purpose. If routing
is disabled, router discovery is disabled as well. SEQUENCE OF HmAgentSwitchIpRouterDiscoveryEntry .1.3.6.1.4.1.248.15.2.2.4 |
hmAgentSwitchIpRouterDiscoveryEntryThe entry of the hmAgentSwitchIpRouterDiscoveryTable. HmAgentSwitchIpRouterDiscoveryEntry .1.3.6.1.4.1.248.15.2.2.4.1 |
hmAgentSwitchIpRouterDiscoveryIfIndexInterface Number to configure Router Discovery on.ro Integer32 .1.3.6.1.4.1.248.15.2.2.4.1.1 |
hmAgentSwitchIpRouterDiscoveryAdvertiseModeEnable or disable router discovery on the interface.rw Enumeration .1.3.6.1.4.1.248.15.2.2.4.1.2 |
hmAgentSwitchIpRouterDiscoveryMaxAdvertisementIntervalMaximum time allowed between sending router advertisements
from the interface.rw Integer32 .1.3.6.1.4.1.248.15.2.2.4.1.3 |
hmAgentSwitchIpRouterDiscoveryMinAdvertisementIntervalMinimum time allowed between sending router advertisements from the interface.
This value must be less than or equal to
hmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.248.15.2.2.4.1.4 |
hmAgentSwitchIpRouterDiscoveryAdvertisementLifetimeValue of lifetime field of router advertsisement sent from
the interface.
This value must be greater than or equal to
hmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.248.15.2.2.4.1.5 |
hmAgentSwitchIpRouterDiscoveryPreferenceLevelPreferability of the address as a default router address,
related to other addresses on the same subnet. This is defined
as the larger the number, the higher the preference.rw Integer32 .1.3.6.1.4.1.248.15.2.2.4.1.6 |
hmAgentSwitchIpRouterDiscoveryAdvertisementAddressAddress used when sending router advertisements from the interface.rw IpAddress .1.3.6.1.4.1.248.15.2.2.4.1.7 |
hmAgentSwitchIpVlanTableThe hmAgentSwitchIpVlanTable. SEQUENCE OF HmAgentSwitchIpVlanEntry .1.3.6.1.4.1.248.15.2.2.5 |
hmAgentSwitchIpVlanEntryA Static VLAN for which routing can be enabled/disabled. HmAgentSwitchIpVlanEntry .1.3.6.1.4.1.248.15.2.2.5.1 |
hmAgentSwitchIpVlanIdThe Vlan's Id.ro Integer32 .1.3.6.1.4.1.248.15.2.2.5.1.1 |
hmAgentSwitchIpVlanIfIndexThe IfIndex associated with this VLAN.ro Integer32 .1.3.6.1.4.1.248.15.2.2.5.1.2 |
hmAgentSwitchIpVlanRoutingStatusStatus of Routing mode per Vlan.
active(1) - Vlan is enabled for routing
createAndGo(4) - Adds Vlan entry for routing
destroy(6) - Removes Vlan from routingrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.2.5.1.3 |
hmAgentSwitchSecondaryAddressTableContains a list of secondary IP Addresses associated with an interface. SEQUENCE OF HmAgentSwitchSecondaryAddressEntry .1.3.6.1.4.1.248.15.2.2.6 |
hmAgentSwitchSecondaryAddressEntryA secondary IP Address for a given interface. This IP Address must not
conflict with the IP Address configured in the hmAgentSwitchIpInterfaceTable. HmAgentSwitchSecondaryAddressEntry .1.3.6.1.4.1.248.15.2.2.6.1 |
hmAgentSwitchSecondaryIpAddressThe Secondary IP Address assigned to this interface. IpAddress .1.3.6.1.4.1.248.15.2.2.6.1.1 |
hmAgentSwitchSecondaryNetMaskThe Secondary Net Mask assigned to this interface. This value must be
set during creation, and can not be changed.rw IpAddress .1.3.6.1.4.1.248.15.2.2.6.1.2 |
hmAgentSwitchSecondaryStatusCreates a new entry in the Secondary Address table.
Allowed values are:
createAndGo(4) - Creates an entry in this table, associating the address
with a given interface. The hmAgentSwitchSecondaryNetMask
object must be set during creation.
destroy(6) - Removes the associated address from the interface.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.2.6.1.3 |
hmAgentSwitchIpRoutePreferenceTableThis table contains the MIB objects required to configure
the preferences/ administrative distances for the various
routing protocols: SEQUENCE OF HmAgentSwitchIpRoutePreferenceEntry .1.3.6.1.4.1.248.15.2.2.7 |
hmAgentSwitchIpRoutePreferenceEntryThe entry of the hmAgentSwitchIpRoutePreferenceTable. HmAgentSwitchIpRoutePreferenceEntry .1.3.6.1.4.1.248.15.2.2.7.1 |
hmAgentSwitchIpRoutePreferenceSourceRouting protocol for which this entry belongsro Enumeration .1.3.6.1.4.1.248.15.2.2.7.1.1 |
hmAgentSwitchIpRoutePreferenceValueAdminstrative distance for this routing protocol.rw Integer32 .1.3.6.1.4.1.248.15.2.2.7.1.2 |
hmAgentSwitchIpRouteStaticTable...... SEQUENCE OF HmAgentSwitchIpRouteStaticEntry .1.3.6.1.4.1.248.15.2.2.8 |
hmAgentSwitchIpRouteStaticEntryThe entry of the hmAgentSwitchIpRouteStaticTable. HmAgentSwitchIpRouteStaticEntry .1.3.6.1.4.1.248.15.2.2.8.1 |
hmAgentSwitchIpRouteStaticDestination..... IpAddress .1.3.6.1.4.1.248.15.2.2.8.1.1 |
hmAgentSwitchIpRouteStaticDestinationMask..... IpAddress .1.3.6.1.4.1.248.15.2.2.8.1.2 |
hmAgentSwitchIpRouteStaticNextHop..... IpAddress .1.3.6.1.4.1.248.15.2.2.8.1.3 |
hmAgentSwitchIpRouteStaticPreference.....rw Integer32 .1.3.6.1.4.1.248.15.2.2.8.1.4 |
hmAgentSwitchIpRouteStaticStatus.....rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.2.8.1.5 |
hmAgentSwitchIpRouteStaticTrackIdThe trackId of the object that should be tracked by this nexthop.
If the object goes down, the nexthop is removed from the routing table,
it is added again if the object goes up. A value of zero means no trackingrw Integer32 .1.3.6.1.4.1.248.15.2.2.8.1.6 |
hmAgentSwitchIpVlanSingleMacModeIf enabled, all vlan routing interfaces use the same MAC address.rw Enumeration .1.3.6.1.4.1.248.15.2.2.100 |
hmAgentSwitchIpTableSizesGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.2.101 |
hmAgentSwitchIpTableSizeArpSets the maximum size of the ARP table for routingrw Integer32 .1.3.6.1.4.1.248.15.2.2.101.1 |
hmAgentSwitchIpTableSizeUCRoutesSets the size of the unicast route tablerw Integer32 .1.3.6.1.4.1.248.15.2.2.101.2 |
hmAgentSwitchIpTableSizeMCRoutesSets the size of the multicast route tablerw Integer32 .1.3.6.1.4.1.248.15.2.2.101.3 |
hmAgentSwitchIpCurrentTableSizeArpThe current size of the ARP table for routingro Integer32 .1.3.6.1.4.1.248.15.2.2.101.4 |
hmAgentSwitchIpCurrentTableSizeUCRoutesThe current size of the unicast route tablero Integer32 .1.3.6.1.4.1.248.15.2.2.101.5 |
hmAgentSwitchIpCurrentTableSizeMCRoutesThe current size of the multicast route tablero Integer32 .1.3.6.1.4.1.248.15.2.2.101.6 |
hmAgentRouterRipConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.3 |
hmAgentRouterRipAdminStateSets the administrative mode of RIP in the router.rw Enumeration .1.3.6.1.4.1.248.15.2.3.1 |
hmAgentRouterRipSplitHorizonModeSets the RIP split horizon operating mode in the router.
A value of none(1) means split horizon processing is
disabled. When set to simple(2), the simple split
horizon technique is used. When set to poisonReverse(3),
the split horizon with poison reverse technique is used.
The default split horizon mode is simple(2).rw Enumeration .1.3.6.1.4.1.248.15.2.3.2 |
hmAgentRouterRipAutoSummaryModeSets the RIP auto summarization mode in the router.
A value of enable(1) means that routes advertized by
this RIP router are combined, or summarized, whenever
possible into aggregates. When set to disable(2),
routes are not aggregated in RIP updates generated
by this router. The default auto summary mode is
enable(1).rw Enumeration .1.3.6.1.4.1.248.15.2.3.3 |
hmAgentRouterRipHostRoutesAcceptModeSets the RIP host route acceptance mode in the router.
A value of enable(1) means that host routes advertized
to this RIP router will be accepted (learned) into its
routing table. When set to disable(2), host routes
advertized in RIP updates from neighboring routers
are ignored. The default host routes accept mode is
enable(1).rw Enumeration .1.3.6.1.4.1.248.15.2.3.4 |
hmAgentRouterRipDefaultMetricDefault metric of redistributed routes, when RIP redistributes
from other protocols.rw Integer32 .1.3.6.1.4.1.248.15.2.3.5 |
hmAgentRouterRipDefaultMetricConfiguredFlag to determine whether RIP default-metric is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.3.6 |
hmAgentRouterRipDefaultInfoOriginateFlag to determine, whether RIP can advertise a default-route learned
from another protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.3.7 |
hmAgentRipRouteRedistTableThis table contains the MIB objects required to configure
route-redistribution for RIP. Here, RIP is the Destination
protocol and the source protocols can be any of : BGP, OSPF,
Static, Connected. SEQUENCE OF HmAgentRipRouteRedistEntry .1.3.6.1.4.1.248.15.2.3.8 |
hmAgentRipRouteRedistEntryThe entry of the hmAgentRipRouteRedistTable. HmAgentRipRouteRedistEntry .1.3.6.1.4.1.248.15.2.3.8.1 |
hmAgentRipRouteRedistSourceSource route, from which RIP can redistribute routes.
This object also acts as the identifier for the
RIP redistribution Table entry.ro Enumeration .1.3.6.1.4.1.248.15.2.3.8.1.1 |
hmAgentRipRouteRedistModeUser enabels/disables route-redistribution for a particular source
protocol.rw Enumeration .1.3.6.1.4.1.248.15.2.3.8.1.2 |
hmAgentRipRouteRedistMetricMetric used for redistributing a particular source protocol route
into RIP.rw Integer32 .1.3.6.1.4.1.248.15.2.3.8.1.3 |
hmAgentRipRouteRedistMetricConfiguredFlag to determine whether RIP redistribute-metric is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.3.8.1.4 |
hmAgentRipRouteRedistMatchInternalIf this flag is true, RIP redistributes OSPF internal routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.15.2.3.8.1.5 |
hmAgentRipRouteRedistMatchExternal1If this flag is true, RIP redistributes OSPF External1 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.15.2.3.8.1.6 |
hmAgentRipRouteRedistMatchExternal2If this flag is true, RIP redistributes OSPF External2 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.15.2.3.8.1.7 |
hmAgentRipRouteRedistMatchNSSAExternal1If this flag is true, RIP redistributes OSPF NSSA-External1 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.15.2.3.8.1.8 |
hmAgentRipRouteRedistMatchNSSAExternal2If this flag is true, RIP redistributes OSPF NSSA-External2 routes.
It will be non-applicable, when source protocol is other than ospf.rw Enumeration .1.3.6.1.4.1.248.15.2.3.8.1.9 |
hmAgentRipRouteRedistDistListAccess-list number of the access-list, which filters routes received
from a source-protocol.rw Unsigned32 .1.3.6.1.4.1.248.15.2.3.8.1.10 |
hmAgentRipRouteRedistDistListConfiguredFlag to determine whether Access-list is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.3.8.1.11 |
hmAgentRip2IfConfTableA list of subnets which require separate
configuration in RIP. Augments rip2IfConfTable
in the RIPv2-MIB. SEQUENCE OF HmAgentRip2IfConfEntry .1.3.6.1.4.1.248.15.2.3.9 |
hmAgentRip2IfConfEntryA Single Routing Domain in a single Subnet.
Augments rip2IfConfEntry in RIPv2-MIB. HmAgentRip2IfConfEntry .1.3.6.1.4.1.248.15.2.3.9.1 |
hmAgentRip2IfConfAuthKeyIdThe identifier for the authentication key used
on this interface. This field is only meaningful
when the RIPv2-MIB rip2IfConfAuthType is md5(3);
otherwise, the value is not used.rw Integer32 .1.3.6.1.4.1.248.15.2.3.9.1.1 |
hmAgentRip2InterfaceTableThe hmAgentRip2InterfaceTable. SEQUENCE OF HmAgentRip2InterfaceEntry .1.3.6.1.4.1.248.15.2.3.10 |
hmAgentRip2InterfaceEntryThe entry of the hmAgentRip2InterfaceTable. HmAgentRip2InterfaceEntry .1.3.6.1.4.1.248.15.2.3.10.1 |
hmAgentRip2InterfaceIfIndexThe IfIndex associated with this instance.ro Integer32 .1.3.6.1.4.1.248.15.2.3.10.1.1 |
hmAgentRip2InterfaceAuthTypeThe type of Authentication used on this interface.rw Enumeration .1.3.6.1.4.1.248.15.2.3.10.1.2 |
hmAgentRip2InterfaceAuthKeyThe value to be used as the Authentication Key
whenever the corresponding instance of
hmAgentRip2InterfaceAuthType has a value other than
noAuthentication. A modification of the corresponding
instance of hmAgentRip2InterfaceAuthType does not modify
the hmAgentRip2InterfaceAuthKey value. If a string shorter
than 16 octets is supplied, it will be left-
justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object.rw OCTET STRING .1.3.6.1.4.1.248.15.2.3.10.1.3 |
hmAgentRip2InterfaceAuthKeyIdThe identifier for the authentication key used
on this interface. This field is only meaningful
when the hmAgentRip2InterfaceAuthType is md5(3);
otherwise, the value is not used.rw Integer32 .1.3.6.1.4.1.248.15.2.3.10.1.4 |
hmAgentRip2InterfaceSendVersionWhat the router sends on this interface.
ripVersion1 implies sending RIP updates compliant
with RFC 1058. rip1Compatible implies
broadcasting RIP-2 updates using RFC 1058 route
subsumption rules. ripVersion2 implies
multicasting RIP-2 updates.rw Enumeration .1.3.6.1.4.1.248.15.2.3.10.1.5 |
hmAgentRip2InterfaceReceiveVersionThis indicates which version of RIP updates
are to be accepted. Note that rip2 and
rip1OrRip2 implies reception of multicast
packets.rw Enumeration .1.3.6.1.4.1.248.15.2.3.10.1.6 |
hmAgentRip2InterfaceAdminStateEnables/disables RIP on the interfacerw Enumeration .1.3.6.1.4.1.248.15.2.3.10.1.7 |
hmAgentRip2RcvBadPackets......ro Counter32 .1.3.6.1.4.1.248.15.2.3.10.1.8 |
hmAgentRip2RcvBadRoutes....ro Counter32 .1.3.6.1.4.1.248.15.2.3.10.1.9 |
hmAgentRip2SentUpdates....ro Counter32 .1.3.6.1.4.1.248.15.2.3.10.1.10 |
hmAgentRouterRipUpdateTimerIntervalSets the RIP update timer interval in the router.
This is the time in seconds between two full routing table
update packets.rw Integer32 .1.3.6.1.4.1.248.15.2.3.50 |
hmAgentRouterOspfConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.4 |
hmAgentOspfDefaultMetricDefault metric of redistributed routes, when OSPF redistributes
from other protocols.rw Integer32 .1.3.6.1.4.1.248.15.2.4.1 |
hmAgentOspfDefaultMetricConfiguredFlag to determine whether OSPF default-metric is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.4.2 |
hmAgentOspfDefaultInfoOriginateFlag to determine, whether OSPF can advertise a default-route learned
from another protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.4.3 |
hmAgentOspfDefaultInfoOriginateAlwaysWhen this flag is true, the router advertises 0.0.0.0/0.0.0.0 always.
Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the
router's forwarding table contains a default route.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.4.4 |
hmAgentOspfDefaultInfoOriginateMetricMetric of the default route,which OSPF advertises when learned from
other protocol.rw Integer32 .1.3.6.1.4.1.248.15.2.4.5 |
hmAgentOspfDefaultInfoOriginateMetricConfiguredFlag to determine whether OSPF default-info originate metric
is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.4.6 |
hmAgentOspfDefaultInfoOriginateMetricTypeMetric Type of the default route,which OSPF advertises when learned from
other protocol. It can be 1(external type 1) or 2(external type 2).rw Enumeration .1.3.6.1.4.1.248.15.2.4.7 |
hmAgentOspfRouteRedistTableThis table contains the MIB objects required to configure
route-redistribution for OSPF. Here, OSPF is the Destination
protocol and the source protocols can be any of : BGP, RIP,
Static, Connected. SEQUENCE OF HmAgentOspfRouteRedistEntry .1.3.6.1.4.1.248.15.2.4.8 |
hmAgentOspfRouteRedistEntryThe entry of the hmAgentOspfRouteRedistTable. HmAgentOspfRouteRedistEntry .1.3.6.1.4.1.248.15.2.4.8.1 |
hmAgentOspfRouteRedistSourceSource protocol, from which OSPF can redistribute routes.
This object also acts as the identifier for the
OSPF redistribution Table entry.ro Enumeration .1.3.6.1.4.1.248.15.2.4.8.1.1 |
hmAgentOspfRouteRedistModeUser enabels/disables route-redistribution for a particular source
protocol.rw Enumeration .1.3.6.1.4.1.248.15.2.4.8.1.2 |
hmAgentOspfRouteRedistMetricMetric used for redistributing a particular source protocol route
into OSPF.rw Integer32 .1.3.6.1.4.1.248.15.2.4.8.1.3 |
hmAgentOspfRouteRedistMetricConfiguredFlag to determine whether OSPF redistribute-metric is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.4.8.1.4 |
hmAgentOspfRouteRedistMetricTypeMetric Type of routes,which OSPF redistributes from other source protocols.
It can be 1(external type 1) or 2(external type 2).rw Enumeration .1.3.6.1.4.1.248.15.2.4.8.1.5 |
hmAgentOspfRouteRedistTagIt specifies the tag field in routes redistributed by OSPF.rw Unsigned32 .1.3.6.1.4.1.248.15.2.4.8.1.6 |
hmAgentOspfRouteRedistSubnetsIf this value is false, then OSPF will not redistribute subnetted routes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.4.8.1.7 |
hmAgentOspfRouteRedistDistListAccess-list number of the access-list, which filters routes received
from a source-protocol.rw Unsigned32 .1.3.6.1.4.1.248.15.2.4.8.1.8 |
hmAgentOspfRouteRedistDistListConfiguredFlag to determine whether Access-list is configured or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.4.8.1.9 |
hmAgentOspfIfTableThe OSPF Interface Table describes the inter-
faces from the viewpoint of OSPF. Augments
ospfIfTable from the OSPF-MIB. SEQUENCE OF HmAgentOspfIfEntry .1.3.6.1.4.1.248.15.2.4.9 |
hmAgentOspfIfEntryThe OSPF Interface Entry describes one inter-
face from the viewpoint of OSPF. Augments
ospfIfEntry in OSPF-MIB. HmAgentOspfIfEntry .1.3.6.1.4.1.248.15.2.4.9.1 |
hmAgentOspfIfAuthKeyIdThe identifier for the authentication key used
on this interface. This field is only meaningful
when the OSPF-MIB ospfIfAuthType is md5(2);
otherwise, the value is not used.rw Integer32 .1.3.6.1.4.1.248.15.2.4.9.1.1 |
hmAgentOspfIfIpMtuIgnoreFlagConfigures the IP MTU Ignore Flag value for this OSPF interface.rw Enumeration .1.3.6.1.4.1.248.15.2.4.9.1.2 |
hmAgentOspfVirtIfTableInformation about this router's virtual inter-
faces. Augments ospfVirtIfTable from the OSPF-MIB. SEQUENCE OF HmAgentOspfVirtIfEntry .1.3.6.1.4.1.248.15.2.4.10 |
hmAgentOspfVirtIfEntryInformation about a single Virtual Interface.
Augments ospfVirtIfEntry in OSPF-MIB. HmAgentOspfVirtIfEntry .1.3.6.1.4.1.248.15.2.4.10.1 |
hmAgentOspfVirtIfAuthKeyIdThe identifier for the authentication key used
on this virtual interface. This field is only meaningful
when the OSPF-MIB ospfVirtIfAuthType is md5(2);
otherwise, the value is not used.rw Integer32 .1.3.6.1.4.1.248.15.2.4.10.1.1 |
hmAgentRouterOspfRFC1583CompatibilityModeFrom RFC2328:
Controls the preference rules used in Section 16.4 when
choosing among multiple AS-external-LSAs advertising the
same destination. When set to 'enabled', the preference
rules remain those specified by RFC 1583 ([Ref9]). When set
to 'disabled', the preference rules are those stated in
Section 16.4.1, which prevent routing loops when AS-
external-LSAs for the same destination have been originated
from different areas. Set to 'enabled' by default.
In order to minimize the chance of routing loops, all OSPF
routers in an OSPF routing domain should have
RFC1583Compatibility set identically. When there are routers
present that have not been updated with the functionality
specified in Section 16.4.1 of this memo, all routers should
have RFC1583Compatibility set to 'enabled'. Otherwise, all
routers should have RFC1583Compatibility set to 'disabled',
preventing all routing loops.rw Enumeration .1.3.6.1.4.1.248.15.2.4.11 |
hmAgentSnmpTrapFlagsConfigGroupLayer3 OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.5 |
hmAgentSnmpVRRPNewMasterTrapFlagThis flag enables the sending of VRRP new master notification
traps.rw Enumeration .1.3.6.1.4.1.248.15.2.5.1 |
hmAgentSnmpVRRPAuthFailureTrapFlagThis flag enables the sending of VRRP authentication failure
notification traps.rw Enumeration .1.3.6.1.4.1.248.15.2.5.2 |
hmAgentECMPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.7 |
hmAgentECMPOspfMaxPathsIt sets the number of paths that OSPF can report for a given destination
where maxpaths is platform-dependent.rw Integer32 .1.3.6.1.4.1.248.15.2.7.1 |
hmAgentRouterVrrpConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.8 |
hmAgentRouterVrrpAdminStateSets the administrative mode of VRRP in the router.rw Enumeration .1.3.6.1.4.1.248.15.2.8.1 |
hmVrrpExtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.248.15.2.9 |
hmVrrpTrackingTableThis table contains variables to define
an entry in the VRRP Tracking database. SEQUENCE OF HmVrrpTrackingEntry .1.3.6.1.4.1.248.15.2.9.1 |
hmVrrpTrackingEntryThe entry of the hmVrrpTrackingTable. HmVrrpTrackingEntry .1.3.6.1.4.1.248.15.2.9.1.1 |
hmVrrpTrackIfIndexDURABLE: { 1:all }
The interface number of the virtual router Integer32 .1.3.6.1.4.1.248.15.2.9.1.1.1 |
hmVrrpTrackVridDURABLE: { 1:all }
The virtual router id for this virtual router Integer32 .1.3.6.1.4.1.248.15.2.9.1.1.2 |
hmVrrpTrackIdDURABLE: { 1:all }
The id of the object being tracked Integer32 .1.3.6.1.4.1.248.15.2.9.1.1.3 |
hmVrrpTrackDecrementDURABLE: { 1:all }
The value by wich the current priority of the virtual router
is decremented when the tracked object goes DOWN.rw Integer32 .1.3.6.1.4.1.248.15.2.9.1.1.4 |
hmVrrpTrackOperStatusShows if the tracked object is currently UP od DOWNro Enumeration .1.3.6.1.4.1.248.15.2.9.1.1.5 |
hmVrrpTrackRowStatusDURABLE: { 1:all }
Defines the status of a vrrp tracking database entry.
Set to createAndGo(4) to create a new row.
Set to destroy(6) to delete an entry.
Reads as active(1) if the tracked object exists and is trackable,
notReady(3) otherwise.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.248.15.2.9.1.1.6 |
hmVrrpExtTableThis table contains variables to define
an entry in the VRRP enhancements database. SEQUENCE OF HmVrrpExtEntry .1.3.6.1.4.1.248.15.2.9.2 |
hmVrrpExtEntryThe entry of the hmVrrpExtTable. HmVrrpExtEntry .1.3.6.1.4.1.248.15.2.9.2.1 |
hmVrrpExtIfIndexDURABLE: { 1:all }
The interface number of the virtual router Integer32 .1.3.6.1.4.1.248.15.2.9.2.1.1 |
hmVrrpExtVridDURABLE: { 1:all }
The virtual router id for this virtual router Integer32 .1.3.6.1.4.1.248.15.2.9.2.1.2 |
hmVrrpExtDomainIdDURABLE: { 1:all }
The domain this virtual router is a member of. If set to
0, the virtual router is not a member of any domain.rw Integer32 .1.3.6.1.4.1.248.15.2.9.2.1.3 |
hmVrrpExtDomainRoleDURABLE: { 1:all }
The role of this virtual router in its domain. This is none(1) if
the virtual router is not member of a domain, supervisor(3) if it
is the supervisor of its domain, member(2) otherwise.rw Enumeration .1.3.6.1.4.1.248.15.2.9.2.1.4 |
hmVrrpExtDomainStatusShows if the domain configuration is correct for this virtual routerro Enumeration .1.3.6.1.4.1.248.15.2.9.2.1.5 |
hmVrrpExtAdvertAddressDURABLE: { 1:all }
The IP address advertisements of the virtual router are sent torw IpAddress .1.3.6.1.4.1.248.15.2.9.2.1.6 |
hmVrrpExtAdvertTimerDURABLE: { 1:all }
This is used to set the interval between advertisements in
milliseconds. This accesses the same value as
vrrpOperAdvertisementInterval.rw Integer32 .1.3.6.1.4.1.248.15.2.9.2.1.7 |
hmVrrpExtOperPriorityDURABLE: { 1:all }
The current operating priority of the virtual router. This can be
different from the configured priority if tracked objects are down.
For domain members this is the priority of the supervisor of that
Domain.ro Integer32 .1.3.6.1.4.1.248.15.2.9.2.1.8 |
hmVrrpExtNotifyAddressDURABLE: { 1:all }
The IP address notifications of the virtual router are sent torw IpAddress .1.3.6.1.4.1.248.15.2.9.2.1.9 |
hmVrrpExtNotifyLinkdownDURABLE: { 1:all }
Enables or disables sending of notification messages if the
virtual router's interface goes down.rw Enumeration .1.3.6.1.4.1.248.15.2.9.2.1.10 |
hmVrrpExtPreemptionDelayDURABLE: { 1:all }
Time (in seconds) after startup of the virtual router by which the
preemption of a Master with a lower priority is delayed.rw Integer32 .1.3.6.1.4.1.248.15.2.9.2.1.11 |
hmVrrpDomainTableThis table contains variables to define
an entry in the VRRP domain database. SEQUENCE OF HmVrrpDomainEntry .1.3.6.1.4.1.248.15.2.9.3 |
hmVrrpDomainEntry HmVrrpDomainEntry .1.3.6.1.4.1.248.15.2.9.3.1 |
hmVrrpDomainIdThe domain ID. Integer32 .1.3.6.1.4.1.248.15.2.9.3.1.1 |
hmVrrpDomainMemberSendAdvDURABLE: { 1:all }
Determines if the members of this domain send advertisement packets.
If set to disabled(2), only the supervisor of the domain sends packets.rw Enumeration .1.3.6.1.4.1.248.15.2.9.3.1.2 |
hmVrrpDomainStatusShows if the configuration of the domain is complete.ro Enumeration .1.3.6.1.4.1.248.15.2.9.3.1.3 |
hmVrrpDomainSupervisorIfIndexThe interface number of the supervisor of the domainro Integer32 .1.3.6.1.4.1.248.15.2.9.3.1.4 |
hmVrrpDomainSupervisorVridThe virtual router id of the supervisor of the domainro Integer32 .1.3.6.1.4.1.248.15.2.9.3.1.5 |
hmVrrpDomainOperPriorityThe current operating priority of the domain. This can be
different from the configured priority if tracked objects are down.
For domain members this is the priority of the supervisor of that
Domain if the supervisor is configured and up.ro Integer32 .1.3.6.1.4.1.248.15.2.9.3.1.6 |
hmVrrpDomainSupervisorOperStateShows the current operational state of the domain supervisor.ro Enumeration .1.3.6.1.4.1.248.15.2.9.3.1.7 |