CISCO-CAS-IF-EXT-MIB
The CISCO-CAS-IF-EXT-MIB extends the Cisco CAS interface MIB to monitor and manage specific attributes of Channel Associated Signaling (CAS) voice interfaces on Cisco hardware. It provides granular visibility into voice channel states, signaling parameters, and interface-level counters essential for diagnosing T1/E1 PRI and BRI voice link performance.
Imported Objects
Objects
212 total| Object Name |
|---|
ciscoCasIfExtMIB MODULE-IDENTITY .1.3.6.1.4.1.9.9.314 |
ciscoCasIfExtMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.314.0 |
ciscoCasIfExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.314.1 |
ccasIfExtConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.314.1.1 |
ccasIfExtVoiceCfgTable SEQUENCE OF CcasIfExtVoiceCfgEntry .1.3.6.1.4.1.9.9.314.1.1.1 |
ccasIfExtVoiceCfgEntry CcasIfExtVoiceCfgEntry .1.3.6.1.4.1.9.9.314.1.1.1.1 |
ccasIfExtVoiceCfgLifNumberrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.1.1.1.1 |
ccasIfExtVoiceCfgCcntrlProfilerw CCallControlProfileIndexOrZero (CISCO-MEDIA-GATEWAY-MIB) .1.3.6.1.4.1.9.9.314.1.1.1.1.2 |
ccasIfExtVoiceCfgVadEnabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.314.1.1.1.1.3 |
ccasIfExtVoiceCfgContinuityTone1rw Unsigned32 .1.3.6.1.4.1.9.9.314.1.1.1.1.4 |
ccasIfExtVoiceCfgContinuityTone2rw Unsigned32 .1.3.6.1.4.1.9.9.314.1.1.1.1.5 |
ccasIfExtVoiceCfgModemPassThrurw Enumeration .1.3.6.1.4.1.9.9.314.1.1.1.1.6 |
ccasIfExtVoiceCfgUpspeedCodecrw CvcCoderTypeRate (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.314.1.1.1.1.7 |
ccasIfExtVoiceCfgT38MaxFaxTxRaterwdeprecated CvcFaxTransmitRate (CISCO-VOICE-COMMON-DIAL-CONTROL-MIB) .1.3.6.1.4.1.9.9.314.1.1.1.1.8 |
ccasIfExtVoiceCfgT38HsPktPeriodrwdeprecated CiscoCodecPacketPeriod UNITS "microseconds" .1.3.6.1.4.1.9.9.314.1.1.1.1.9 |
ccasIfExtVoiceCfgT38HsRedundancyrwdeprecated Unsigned32 .1.3.6.1.4.1.9.9.314.1.1.1.1.10 |
ccasIfExtVoiceCfgRepetitionrw ConfigIterator (CISCO-TC) .1.3.6.1.4.1.9.9.314.1.1.1.1.11 |
ccasIfExtVoiceCfgBulkCfgOwnerrw OwnerString (RMON-MIB) .1.3.6.1.4.1.9.9.314.1.1.1.1.12 |
ccasIfExtVoiceCfgBulkCfgResultro BulkConfigResult (CISCO-TC) .1.3.6.1.4.1.9.9.314.1.1.1.1.13 |
ccasIfExtVoiceCfgVadTimerrw Integer32 .1.3.6.1.4.1.9.9.314.1.1.1.1.14 |
ccasIfExtVoiceCfgICSEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.314.1.1.1.1.15 |
ccasIfExtVoiceCfgICSIntTimerrw Integer32 .1.3.6.1.4.1.9.9.314.1.1.1.1.16 |
ccasIfExtVoiceCfgTonePlanrw CVoiceTonePlanIndexOrZero (CISCO-MEDIA-GATEWAY-MIB) .1.3.6.1.4.1.9.9.314.1.1.1.1.17 |
ccasIfExtVoiceCfgGwyLinkIdrw Integer32 .1.3.6.1.4.1.9.9.314.1.1.1.1.18 |
ccasIfExtVoiceCfgH248PkgIdsrw CH248Packages (CISCO-MEGACO-EXT-MIB) .1.3.6.1.4.1.9.9.314.1.1.1.1.19 |
ccasIfExtVoiceCfgEventMappingIdxrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.1.1.1.20 |
ccasIfExtVoiceCfgGatewayIndexrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.1.1.1.21 |
ccasIfExtVoiceCfgCasProfilerw Unsigned32 .1.3.6.1.4.1.9.9.314.1.1.1.1.22 |
ccasIfExtVoiceCfgCasVariantrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.1.1.1.23 |
ccasIfExtVoiceCfgDs0ChannelsFailro OCTET STRING .1.3.6.1.4.1.9.9.314.1.1.1.1.24 |
ccasIfExtVoiceCfgNoiseRegTyperw Enumeration .1.3.6.1.4.1.9.9.314.1.1.1.1.25 |
ccasIfExtDs0GrpCfgTable SEQUENCE OF CcasIfExtDs0GrpCfgEntry .1.3.6.1.4.1.9.9.314.1.1.3 |
ccasIfExtDs0GrpCfgEntry CcasIfExtDs0GrpCfgEntry .1.3.6.1.4.1.9.9.314.1.1.3.1 |
ccasIfExtDs0GrpRepetitionrw ConfigIterator (CISCO-TC) .1.3.6.1.4.1.9.9.314.1.1.3.1.1 |
ccasIfExtDs0GrpRepeatOwnerrw OwnerString (RMON-MIB) .1.3.6.1.4.1.9.9.314.1.1.3.1.2 |
ccasIfExtDs0GrpRepeatResultro BulkConfigResult (CISCO-TC) .1.3.6.1.4.1.9.9.314.1.1.3.1.3 |
ccasIfExtProfile OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.314.1.2 |
ccasIfExtProfileTable SEQUENCE OF CcasIfExtProfileEntry .1.3.6.1.4.1.9.9.314.1.2.1 |
ccasIfExtProfileEntry CcasIfExtProfileEntry .1.3.6.1.4.1.9.9.314.1.2.1.1 |
ccasProfileIndex Unsigned32 .1.3.6.1.4.1.9.9.314.1.2.1.1.1 |
ccasProfileLineSigTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.2.1.1.2 |
ccasProfileRegisterSignalrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.2.1.1.3 |
ccasProfileRegSigTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.2.1.1.4 |
ccasProfileGeneralCfgrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.2.1.1.5 |
ccasProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.314.1.2.1.1.6 |
ccasIfExtVariantTable SEQUENCE OF CcasIfExtVariantEntry .1.3.6.1.4.1.9.9.314.1.2.2 |
ccasIfExtVariantEntry CcasIfExtVariantEntry .1.3.6.1.4.1.9.9.314.1.2.2.1 |
ccasVariantIndex Unsigned32 .1.3.6.1.4.1.9.9.314.1.2.2.1.1 |
ccasVariantFilerw SnmpAdminString ( SIZE .1.3.6.1.4.1.9.9.314.1.2.2.1.2 |
ccasVariantSourcerw Enumeration .1.3.6.1.4.1.9.9.314.1.2.2.1.3 |
ccasVariantNumberCountro Gauge32 .1.3.6.1.4.1.9.9.314.1.2.2.1.4 |
ccasVariantStatero Enumeration .1.3.6.1.4.1.9.9.314.1.2.2.1.5 |
ccasVariantRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.314.1.2.2.1.6 |
ccasIfExtConfigLineSignal OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.314.1.3 |
ccasIfExtIncomingLineSignalTable SEQUENCE OF CcasIfExtIncomingLineSignalEntry .1.3.6.1.4.1.9.9.314.1.3.1 |
ccasIfExtIncomingLineSignalEntry CcasIfExtIncomingLineSignalEntry .1.3.6.1.4.1.9.9.314.1.3.1.1 |
ccasILSSignalNameIndex Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.1.1.2 |
ccasILSSignalNamero SnmpAdminString .1.3.6.1.4.1.9.9.314.1.3.1.1.3 |
ccasILSRxPatternro CASLineSignal .1.3.6.1.4.1.9.9.314.1.3.1.1.4 |
ccasILSMatchedRxPatternro CASLineSignal .1.3.6.1.4.1.9.9.314.1.3.1.1.5 |
ccasILSMatchedTxPatternro CASLineSignal .1.3.6.1.4.1.9.9.314.1.3.1.1.6 |
ccasILSMinMakeTimerw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.1.1.7 |
ccasILSMaxMakeTimerw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.1.1.8 |
ccasILSMinBreakTimerw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.1.1.9 |
ccasILSMaxBreakTimerw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.1.1.10 |
ccasIfExtOutgoingLineSignalTable SEQUENCE OF CcasIfExtOutgoingLineSignalEntry .1.3.6.1.4.1.9.9.314.1.3.2 |
ccasIfExtOutgoingLineSignalEntry CcasIfExtOutgoingLineSignalEntry .1.3.6.1.4.1.9.9.314.1.3.2.1 |
ccasOLSSignalNameIndex Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.2.1.1 |
ccasOLSCasSignalNamero SnmpAdminString .1.3.6.1.4.1.9.9.314.1.3.2.1.2 |
ccasOLSTxPatternro CASLineSignal .1.3.6.1.4.1.9.9.314.1.3.2.1.3 |
ccasOLSMakeTimerw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.2.1.4 |
ccasOLSBreakTimerw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.2.1.5 |
ccasIfExtLineSignalTimerTable SEQUENCE OF CcasIfExtLineSignalTimerEntry .1.3.6.1.4.1.9.9.314.1.3.3 |
ccasIfExtLineSignalTimerEntry CcasIfExtLineSignalTimerEntry .1.3.6.1.4.1.9.9.314.1.3.3.1 |
ccasLSTIndex Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.1 |
ccasLSTIdleGuardTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.2 |
ccasLSTClearFwdTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.3 |
ccasLSTClearBwdTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.4 |
ccasLSTReleaseGuardTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.5 |
ccasLSTCASGlareTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.6 |
ccasLSTAnswerMeterDelayTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.7 |
ccasLSTCASDebounceTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.8 |
ccasLSTSeizeAckRspTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.9 |
ccasLSTDelayBetRegAnsAndLineAnsrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.10 |
ccasLSTSeizeAckToDigitTimerrw Unsigned32 .1.3.6.1.4.1.9.9.314.1.3.3.1.11 |
ccasLSTRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.314.1.3.3.1.12 |
ccasIfExtConfigRegisterSignal OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.314.1.4 |
ccasIfExtRegisterSignalTable SEQUENCE OF CcasIfExtRegisterSignalEntry .1.3.6.1.4.1.9.9.314.1.4.1 |
ccasIfExtRegisterSignalEntry CcasIfExtRegisterSignalEntry .1.3.6.1.4.1.9.9.314.1.4.1.1 |
ccasRSIndex Unsigned32 .1.3.6.1.4.1.9.9.314.1.4.1.1.1 |
ccasRSCountryrw CASCountryCode .1.3.6.1.4.1.9.9.314.1.4.1.1.2 |
ccasRSSubRegionrw SnmpAdminString ( SIZE .1.3.6.1.4.1.9.9.314.1.4.1.1.3 |
ccasBwdRSNextDigitANIrw CASBackwardSignal .1.3.6.1.4.1.9.9.314.1.4.1.1.4 |
ccasBwdRSNextDigitDNISrw CASBackwardSignal .1.3.6.1.4.1.9.9.314.1.4.1.1.5 |
ccasBwdRSPrevDigitrw CASBackwardSignal .1.3.6.1.4.1.9.9.314.1.4.1.1.6 |
ccasBwdRSXtoGroupBSignalsrw CASBackwardSignal .1.3.6.1.4.1.9.9.314.1.4.1.1.7 |
ccasBwdRSCongestionrw CASBackwardSignal .1.3.6.1.4.1.9.9.314.1.4.1.1.8 |
ccasBwdRSCallingPartyCategoryrw CASBackwardSignal .1.3.6.1.4.1.9.9.314.1.4.1.1.9 |
ccasBwdRSAddrCompleteGroupArw CASBackwardSignal .1.3.6.1.4.1.9.9.314.1.4.1.1.10 |
ccasBwdRSPrevNminus2Digitrw CASBackwardSignal .1.3.6.1.4.1.9.9.314.1.4.1.1.11 |
CISCO-CAS-IF-EXT-MIB Technical Reference Overview
The CISCO-CAS-IF-EXT-MIB SNMP MIB module published by Cisco defines 212 managed OID objects, including 182 scalar/column metrics, 10 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.9.9.314. Key tabular structures include ccasIfExtVoiceCfgTable, ccasIfExtDs0GrpCfgTable, ccasIfExtProfileTable, ccasIfExtVariantTable, ccasIfExtIncomingLineSignalTable, ccasIfExtOutgoingLineSignalTable.
Key OID Definitions in CISCO-CAS-IF-EXT-MIB
.1.3.6.1.4.1.9.9.314The MIB module is an extension of CISCO-CAS-IF-MIB. It defines the attributes of a voice interface.
.1.3.6.1.4.1.9.9.314.1.1.1The voice interface extended table defines the parameters related to the configuration of voice interfaces (DS0 group of DS1). This table extends the ccasVoiceCfgTable. Each table entry describes an instance of a voice interface configuration (DS0 group of DS1) in a media gateway.
.1.3.6.1.4.1.9.9.314.1.1.3The voice interface extended table defines the parameters related to the configuration of voice interfaces (DS0 group of DS1). This table extends the ccasVoiceCfgTable. Each table entry describes an instance of a voice interface configuration (DS0 group of DS1) in a media gateway.
.1.3.6.1.4.1.9.9.314.1.2.1This table specifies a list of CAS profiles. Each CAS profile consists of the configurable CAS attributes related to: . Line signal timers table, ccasIfExtLineSignalTimerTable. . Register signals table, ccasIfExtRegisterSignalTable. . Register signal timers table, ccasIfExtRegSignalTimerTable. . General configurations table, ccasIfExtGeneralConfigTable. A CAS profile can be applied to a DS0 group of the DS1 line with CAS signaling. A DS1 line is configured for CAS signaling when its dsx1SignalMode is set to 'robbedBit(2)' for T1 or 'bitOriented(3)' for E1.
.1.3.6.1.4.1.9.9.314.1.2.2This table specifies a list of CAS signaling protocols such as R2 CAS, Feature Group D Oprerator Services ( FGD OS). Each CAS variant is downloaded to and parsed by the media gateway. A CAS variant can be applied to a DS0 group of the DS1 line with CAS signaling. A DS1 line is configured for CAS signaling when its dsx1SignalMode is set to 'robbedBit(2)' for T1 or 'bitOriented(3)' for E1.
.1.3.6.1.4.1.9.9.314.1.3.1This table defines the parameters related to the incoming line signals for CAS variant. The appropriate signal definitions from this table will be downloaded to the media gateway. The media gateway will use the information provided in this table to match the incoming bit pattern to a particular signal.
.1.3.6.1.4.1.9.9.314.1.3.2This table defines the parameters related to for the outgoing line signals pertaining to that CAS variant.
.1.3.6.1.4.1.9.9.314.1.4.1This table defines the signal to action definitions for the Register signals for R2 variant.
.1.3.6.1.4.1.9.9.314.1.3.3This table defines all timers related to the CAS Line signals.
.1.3.6.1.4.1.9.9.314.1.5.2This table defines the timers related to the CAS register signals.
.1.3.6.1.4.1.9.9.314.1.6.1This table defines the general parameters related to CAS variant.
.1.3.6.1.4.1.9.9.314.1.1.1.1Each entry represents a voice interface (DS0 group of DS1) in a media gateway.
.1.3.6.1.4.1.9.9.314.1.1.1.1.1This object specifies the LIF (Logical InterFace) number associated with this voice interface. If this object is set to 0, this interface does not have an associated LIF.
.1.3.6.1.4.1.9.9.314.1.1.1.1.2This object specifies the index of call control profile that is used by this DS0 group. If the value of ccasGrpCfgServiceType is 'mgcp(6)', this is the index of cxeCallCtrlProfileTable. If the value of ccasGrpCfgServiceType is 'h248(9)', this is the index of cmedxPropertyProfileTable. The value of 0 means the DS0 group is not associated any Profile. The DS0 group is using the default Call Control parameters defined in the media gateway.
.1.3.6.1.4.1.9.9.314.1.1.1.1.3The object specifies VAD (Voice Activity Detection) is enabled for the compression DSPs of this interface. The value of this object is 'false' if the voice interface associated DS0 group uses null signaling. (The value of ccasGrpCfgType in ccasGrpCfgTable for the DS0 group is set to nullSignaling(16)).
.1.3.6.1.4.1.9.9.314.1.1.1.1.4The object specifies the first frequency tone to be sent between the terminating and the originating gateways in the continuity test.
.1.3.6.1.4.1.9.9.314.1.1.1.1.5The object specifies the second frequency tone to be sent between the terminating and the originating gateways in the continuity test.
.1.3.6.1.4.1.9.9.314.1.1.1.1.6This object specifies the modem pass-through mode: (1) passThruDisabled: Modem pass-through is disabled (2) passThruCisco: Cisco Proprietary PV (Protocol Violation) modem protocol used in modem pass-through. (3) passThruNse: Name Signaling Events(NSE) used in modem pass-through. (4) passThruNseAal2: Name Signaling Events(NSE) over AAL2 used in modem pass-through. (5) passThruCa: Gateway modem pass-through is based on Call Agent(CA) Control. (This is a special way used by SGCP) (6) passThruTypeE: FRF.11 Payload Type E packet used in modem pass-through. (7) system: System level modem pass-through configuration is used for the dial-peer. (8) passThruNseCa: Name Signaling Events(NSE) over IP modem pass-through controlled by gateway in MGCP 1.0
.1.3.6.1.4.1.9.9.314.1.1.1.1.7This object specifies the CODEC type to use for modem upspeed. Upspeed is to change the transmission rate of the voice interface to a higher rate of CODEC type.
.1.3.6.1.4.1.9.9.314.1.1.1.1.8This object specifies the maximum FAX relay transmission rate.
.1.3.6.1.4.1.9.9.314.1.1.1.1.9This object specifies the period of time for primary high speed (HS) data packet.
.1.3.6.1.4.1.9.9.314.1.1.1.1.10The object specifies the number of redundant FAX packets for Internet FAX protocol (IFP) packet transmission. The value of '0' indicates that no redundant Internet FAX packets will be transmitted during the T.38 FAX relay connection.
.1.3.6.1.4.1.9.9.314.1.1.1.1.11This object is used to repeatedly apply the writable objects of ccasIfExtVoiceCfgTable specified in the same SNMP PDU starting from the row specifies by the index of the instance for the number of rows specified in this object. The order of operation is iterated through the logical order of the DS0 group. Whether the iteration will be applied across the physical boundary or not is depended on the system implementation.
.1.3.6.1.4.1.9.9.314.1.1.1.1.12This object is used for error checking of the operation specified in ccasIfExtVoiceCfgRepetition. The value of this object is set by the SNMP manager with its own identifier at the same time as issuing the bulk operation by setting ccasIfExtVoiceCfgRepetition. Later on, the SNMP manager should check the value of this object, if it is the same with the SNMP manager name, then the value of ccasIfExtVoiceCfgBulkCfgResult indicates the result of the bulk operation initiated by this SNMP manager.
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-UNIFIED-COMPUTING-COMPUTE-MIB provides SNMP-based monitoring and management of Cisco UCS compute blades, servers, and chassis components, exposing critical metrics such as CPU utilization, memory usage, thermal sensor readings, power supply status, and interface operational states. This module enables granular visibility into the health and performance of the Cisco Unified Computing System's compute subsystems for capacity planning and fault isolation.
The CISCO-UNIFIED-COMPUTING-STORAGE-MIB facilitates SNMP-based monitoring and management of storage subsystems, including Fibre Channel and iSCSI interfaces, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers. It exposes critical operational metrics such as port status, error counters, throughput statistics, and storage controller health states to enable granular visibility into the storage infrastructure.
The CISCO-UNIFIED-COMPUTING-VNIC-MIB enables SNMP-based monitoring and management of Virtual Network Interface Card (vNIC) attributes, including operational status, traffic counters, and binding configurations, within the Cisco Unified Computing System (UCS) fabric interconnects and server blades.
SNMP MIB module
The CISCO-UNIFIED-COMPUTING-BIOS-MIB enables SNMP-based monitoring and configuration of BIOS-level parameters, firmware versions, and hardware initialization states within Cisco Unified Computing System (UCS) servers. It provides visibility into critical server boot diagnostics, BIOS settings, and hardware readiness indicators to facilitate low-level infrastructure management and troubleshooting.
The CISCO-UNIFIED-COMPUTING-ETHER-MIB provides SNMP management interfaces for monitoring Ethernet interface statistics, link states, and error counters on Cisco Unified Computing System (UCS) fabric interconnects and blade server line cards. This module enables the tracking of physical layer connectivity, port throughput, and packet error rates within the UCS Ethernet switching infrastructure.