Home/Catalog/Wellfleet-X25PAD-MIB

Wellfleet-X25PAD-MIB

AI MIB Summary

Standard SNMP MIB module defining data structures for Wellfleet-X25PAD-MIB.

145

Objects

Active

Status

4

Dependencies

Imported Objects

Wellfleet-COMMON-MIB

Objects

145 total

Object Name	Syntax	OID
RFC1155-SMITable of X25 PAD Config Objects SEQUENCE OF WfX25PadDefaultCfgEntry `.1.3.6.1.4.1.18.3.5.9.12.1`	SEQUENCE OF WfX25PadDefaultCfgEntry	`.1.3.6.1.4.1.18.3.5.9.12.1`
wfX25PadCurrentCfgTableTable of X25 PAD Config Objects SEQUENCE OF WfX25PadCurrentCfgEntry `.1.3.6.1.4.1.18.3.5.9.12.2`	SEQUENCE OF WfX25PadCurrentCfgEntry	`.1.3.6.1.4.1.18.3.5.9.12.2`
wfX25PadCurrentCfgEntryAn entry in the X25 Pad Config Table WfX25PadCurrentCfgEntry `.1.3.6.1.4.1.18.3.5.9.12.2.1`	WfX25PadCurrentCfgEntry	`.1.3.6.1.4.1.18.3.5.9.12.2.1`
wfX25PadCurrentCfgStateCurrent state of X.25 PAD sofware on the I-SDBro Enumeration `.1.3.6.1.4.1.18.3.5.9.12.2.1.1`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.2.1.1`
wfX25PadCurrentCfgSlotInstance ID Slot, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.2.1.2`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.2.1.2`
wfX25PadCurrentCfgConnectorInstance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.ro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.2.1.3`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.2.1.3`
wfX25PadCurrentCfgCircuitCircuit number, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.2.1.4`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.2.1.4`
wfX25PadCurrentCfgX121AddrX.121 address of the X.25 Padro DisplayString `.1.3.6.1.4.1.18.3.5.9.12.2.1.5`	DisplayString	`.1.3.6.1.4.1.18.3.5.9.12.2.1.5`
wfX25PadCurrentCfgDNICData Network Identification Codero DisplayString `.1.3.6.1.4.1.18.3.5.9.12.2.1.6`	DisplayString	`.1.3.6.1.4.1.18.3.5.9.12.2.1.6`
wfX25PadCurrentCfgLenSubAddressLength of X.121 subaddressro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.2.1.7`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.2.1.7`
wfX25PadCurrentCfgLCNLowLower range for logical channel numbersro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.2.1.8`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.2.1.8`
wfX25PadCurrentCfgLCNHighUpper range for logical channel numbersro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.2.1.9`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.2.1.9`
wfX25PadStatTableTable of X25 PAD Stat Objects SEQUENCE OF WfX25PadStatEntry `.1.3.6.1.4.1.18.3.5.9.12.3`	SEQUENCE OF WfX25PadStatEntry	`.1.3.6.1.4.1.18.3.5.9.12.3`
wfX25PadStatEntryAn entry in the X25 Pad Config Table WfX25PadStatEntry `.1.3.6.1.4.1.18.3.5.9.12.3.1`	WfX25PadStatEntry	`.1.3.6.1.4.1.18.3.5.9.12.3.1`
wfX25PadStatStateCurrent state of X.25 PAD sofware on the I-SDBro Enumeration `.1.3.6.1.4.1.18.3.5.9.12.3.1.1`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.3.1.1`
wfX25PadStatSlotInstance ID Slot, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.3.1.2`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.3.1.2`
wfX25PadStatConnectorInstance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.ro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.3.1.3`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.3.1.3`
wfX25PadStatTotalConnCountTotal number of connections made to the X.25 Padro Counter `.1.3.6.1.4.1.18.3.5.9.12.3.1.4`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.3.1.4`
wfX25PadStatRxRRNumber of receiver ready packets receivedro Counter `.1.3.6.1.4.1.18.3.5.9.12.3.1.5`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.3.1.5`
wfX25PadStatTxRRNumber of receiver ready packets transmittedro Counter `.1.3.6.1.4.1.18.3.5.9.12.3.1.6`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.3.1.6`
wfX25PadStatRxRNRNumber of receiver not ready packets receivedro Counter `.1.3.6.1.4.1.18.3.5.9.12.3.1.7`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.3.1.7`
wfX25PadStatTxRNRNumber of receiver not ready packets transmittedro Counter `.1.3.6.1.4.1.18.3.5.9.12.3.1.8`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.3.1.8`
wfX25PadStatRxRestartNumber of restart packets receivedro Counter `.1.3.6.1.4.1.18.3.5.9.12.3.1.9`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.3.1.9`
wfX25PadStatTxRestartNumber of restart packets transmittedro Counter `.1.3.6.1.4.1.18.3.5.9.12.3.1.10`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.3.1.10`
wfX25PadPortDefaultCfgTableTable of X25 PAD Port Config Objects SEQUENCE OF WfX25PadPortDefaultCfgEntry `.1.3.6.1.4.1.18.3.5.9.12.4`	SEQUENCE OF WfX25PadPortDefaultCfgEntry	`.1.3.6.1.4.1.18.3.5.9.12.4`
wfX25PadPortDefaultCfgEntryAn entry in the X25 Pad Port Config Table WfX25PadPortDefaultCfgEntry `.1.3.6.1.4.1.18.3.5.9.12.4.1`	WfX25PadPortDefaultCfgEntry	`.1.3.6.1.4.1.18.3.5.9.12.4.1`
wfX25PadPortDefaultCfgDeleteCreate/Delete parameterrw Enumeration `.1.3.6.1.4.1.18.3.5.9.12.4.1.1`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.4.1.1`
wfX25PadPortDefaultCfgDisableEnable/Disable parameterrw Enumeration `.1.3.6.1.4.1.18.3.5.9.12.4.1.2`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.4.1.2`
wfX25PadPortDefaultCfgStateCurrent state of X.25 PAD sofware on the I-SDBro Enumeration `.1.3.6.1.4.1.18.3.5.9.12.4.1.3`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.4.1.3`
wfX25PadPortDefaultCfgSlotInstance ID Slot, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.4`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.4`
wfX25PadPortDefaultCfgConnectorInstance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.ro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.5`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.5`
wfX25PadPortDefaultCfgNumberInstance ID Async Port, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.6`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.6`
wfX25PadPortDefaultCfgSubAddressSubaddress portion of an X.121 address that is used by an application and is transparent to the networkrw DisplayString `.1.3.6.1.4.1.18.3.5.9.12.4.1.7`	DisplayString	`.1.3.6.1.4.1.18.3.5.9.12.4.1.7`
wfX25PadPortDefaultCfgLenSubAddressSize of the Subaddress portion of an X.121 addressrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.8`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.8`
wfX25PadPortDefaultCfgX3escapePAD recall using a characterrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.9`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.9`
wfX25PadPortDefaultCfgX3echoPAD echorw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.10`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.10`
wfX25PadPortDefaultCfgX3forwardSelection of the data forwarding charactersrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.11`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.11`
wfX25PadPortDefaultCfgX3idleSelection of the idle timer delayrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.12`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.12`
wfX25PadPortDefaultCfgX3deviceAncillary device controlrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.13`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.13`
wfX25PadPortDefaultCfgX3signalsControl of PAD service signalsrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.14`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.14`
wfX25PadPortDefaultCfgX3breakSelection of operation of the PAD on receipt of the break signalrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.15`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.15`
wfX25PadPortDefaultCfgX3discardDiscard outputrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.16`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.16`
wfX25PadPortDefaultCfgX3CRpadPadding after carriage returnrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.17`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.17`
wfX25PadPortDefaultCfgX3foldingLine foldingrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.18`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.18`
wfX25PadPortDefaultCfgX3speedBinary speedrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.19`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.19`
wfX25PadPortDefaultCfgX3flowFlow Control of the PAD by the start-stop mode DTErw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.20`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.20`
wfX25PadPortDefaultCfgX3LFinsertLinefeed insertion after carriage returnrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.21`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.21`
wfX25PadPortDefaultCfgX3LFpadLinefeed paddingrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.22`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.22`
wfX25PadPortDefaultCfgX3EditEditingrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.23`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.23`
wfX25PadPortDefaultCfgX3CdeleteCharacter deleterw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.24`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.24`
wfX25PadPortDefaultCfgX3LdeleteLine deleterw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.25`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.25`
wfX25PadPortDefaultCfgX3LdisplayLine displayrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.26`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.26`
wfX25PadPortDefaultCfgX3EsignalsEditing PAD service signalsrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.27`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.27`
wfX25PadPortDefaultCfgX3MaskEcho maskrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.28`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.28`
wfX25PadPortDefaultCfgX3parityParity treatmentrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.29`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.29`
wfX25PadPortDefaultCfgX3pagePage waitrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.30`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.30`
wfX25PadPortDefaultCfgLenUserDataLength of the user defined datarw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.31`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.31`
wfX25PadPortDefaultCfgUserDataUser defined data field represented in hexadecimalrw OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.4.1.32`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.4.1.32`
wfX25PadPortDefaultCfgLenRawFacilitiesLength of the user defined facilitiesrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.33`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.33`
wfX25PadPortDefaultCfgRawFacilitiesDataUser defined facilities filed represented in hexadecimalrw OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.4.1.34`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.4.1.34`
wfX25PadPortDefaultCfgReverseChargeIf subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absence of this facility the DCE will not transmit to the DTE incoming calls which request the reverse charging facility.rw OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.4.1.35`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.4.1.35`
wfX25PadPortDefaultCfgThruClassNegotiationThis facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are considered independently for each direction of data transmission.rw OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.4.1.36`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.4.1.36`
wfX25PadPortDefaultCfgPacketSizeNegotiationThis facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmissionrw OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.4.1.37`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.4.1.37`
wfX25PadPortDefaultCfgWindowSizeNegotiationThis facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmissionrw OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.4.1.38`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.4.1.38`
wfX25PadPortDefaultCfgIntervalTimerTime (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in themrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.4.1.39`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.4.1.39`
wfX25PadPortDefaultCfgFullAddressingDetermines whether calling addresses should be included or notrw Enumeration `.1.3.6.1.4.1.18.3.5.9.12.4.1.40`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.4.1.40`
wfX25PadPortCurrentCfgTableTable of X25 PAD Port Config Objects SEQUENCE OF WfX25PadPortCurrentCfgEntry `.1.3.6.1.4.1.18.3.5.9.12.5`	SEQUENCE OF WfX25PadPortCurrentCfgEntry	`.1.3.6.1.4.1.18.3.5.9.12.5`
wfX25PadPortCurrentCfgEntryAn entry in the X25 Pad Port Config Table WfX25PadPortCurrentCfgEntry `.1.3.6.1.4.1.18.3.5.9.12.5.1`	WfX25PadPortCurrentCfgEntry	`.1.3.6.1.4.1.18.3.5.9.12.5.1`
wfX25PadPortCurrentCfgStateCurrent state of X.25 PAD sofware on the I-SDBro Enumeration `.1.3.6.1.4.1.18.3.5.9.12.5.1.1`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.5.1.1`
wfX25PadPortCurrentCfgSlotInstance ID Slot, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.2`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.2`
wfX25PadPortCurrentCfgConnectorInstance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.ro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.3`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.3`
wfX25PadPortCurrentCfgNumberInstance ID Async Port, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.4`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.4`
wfX25PadPortCurrentCfgSubAddressSubaddress portion of an X.121 address that is used by an application and is transparent to the networkro DisplayString `.1.3.6.1.4.1.18.3.5.9.12.5.1.5`	DisplayString	`.1.3.6.1.4.1.18.3.5.9.12.5.1.5`
wfX25PadPortCurrentCfgLenSubAddressSize of the Subaddress portion of an X.121 addressro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.6`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.6`
wfX25PadPortCurrentCfgX3escapePAD recall using a characterro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.7`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.7`
wfX25PadPortCurrentCfgX3echoPAD echoro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.8`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.8`
wfX25PadPortCurrentCfgX3forwardSelection of the data forwarding charactersro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.9`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.9`
wfX25PadPortCurrentCfgX3idleSelection of the idle timer delayro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.10`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.10`
wfX25PadPortCurrentCfgX3deviceAncillary device controlro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.11`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.11`
wfX25PadPortCurrentCfgX3signalsControl of PAD service signalsro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.12`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.12`
wfX25PadPortCurrentCfgX3breakSelection of operation of the PAD on receipt of the break signalro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.13`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.13`
wfX25PadPortCurrentCfgX3discardDiscard outputro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.14`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.14`
wfX25PadPortCurrentCfgX3CRpadPadding after carriage returnro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.15`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.15`
wfX25PadPortCurrentCfgX3foldingLine foldingro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.16`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.16`
wfX25PadPortCurrentCfgX3speedBinary speedro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.17`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.17`
wfX25PadPortCurrentCfgX3flowFlow Control of the PAD by the start-stop mode DTEro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.18`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.18`
wfX25PadPortCurrentCfgX3LFinsertLinefeed insertion after carriage returnro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.19`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.19`
wfX25PadPortCurrentCfgX3LFpadLinefeed paddingro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.20`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.20`
wfX25PadPortCurrentCfgX3EditEditingro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.21`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.21`
wfX25PadPortCurrentCfgX3CdeleteCharacter deletero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.22`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.22`
wfX25PadPortCurrentCfgX3LdeleteLine deletero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.23`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.23`
wfX25PadPortCurrentCfgX3LdisplayLine displayro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.24`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.24`
wfX25PadPortCurrentCfgX3EsignalsEditing PAD service signalsro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.25`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.25`
wfX25PadPortCurrentCfgX3MaskEcho maskro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.26`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.26`
wfX25PadPortCurrentCfgX3parityParity treatmentro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.27`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.27`
wfX25PadPortCurrentCfgX3pagePage waitro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.28`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.28`
wfX25PadPortCurrentCfgLenUserDataLength of the user defined dataro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.29`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.29`
wfX25PadPortCurrentCfgUserDataUser defined data field represented in hexadecimalro OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.5.1.30`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.5.1.30`
wfX25PadPortCurrentCfgLenRawFacilitiesLength of the user defined facilitiesro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.31`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.31`
wfX25PadPortCurrentCfgRawFacilitiesDataUser defined facilities filed represented in hexadecimalro OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.5.1.32`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.5.1.32`
wfX25PadPortCurrentCfgReverseChargeIf subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absence of this facility the DCE will not transmit to the DTE incoming calls which request the reverse charging facility.ro OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.5.1.33`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.5.1.33`
wfX25PadPortCurrentCfgThruClassNegotiationThis facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are considered independently for each direction of data transmission.ro OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.5.1.34`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.5.1.34`
wfX25PadPortCurrentCfgPacketSizeNegotiationThis facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmission.ro OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.5.1.35`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.5.1.35`
wfX25PadPortCurrentCfgWindowSizeNegotiationThis facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmission.ro OCTET STRING `.1.3.6.1.4.1.18.3.5.9.12.5.1.36`	OCTET STRING	`.1.3.6.1.4.1.18.3.5.9.12.5.1.36`
wfX25PadPortCurrentCfgIntervalTimerTime (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in themrw INTEGER `.1.3.6.1.4.1.18.3.5.9.12.5.1.37`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.5.1.37`
wfX25PadPortCurrentCfgFullAddressingDetermines whether calling addresses should be included or notrw Enumeration `.1.3.6.1.4.1.18.3.5.9.12.5.1.38`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.5.1.38`
wfX25PadPortStatTableTable of X25 PAD Port Stat Objects SEQUENCE OF WfX25PadPortStatEntry `.1.3.6.1.4.1.18.3.5.9.12.6`	SEQUENCE OF WfX25PadPortStatEntry	`.1.3.6.1.4.1.18.3.5.9.12.6`
wfX25PadPortStatEntryAn entry in the X25 Pad Port Stat Table WfX25PadPortStatEntry `.1.3.6.1.4.1.18.3.5.9.12.6.1`	WfX25PadPortStatEntry	`.1.3.6.1.4.1.18.3.5.9.12.6.1`
wfX25PadPortStatStateCurrent state of X.25 PAD sofware on the I-SDBro Enumeration `.1.3.6.1.4.1.18.3.5.9.12.6.1.1`	Enumeration	`.1.3.6.1.4.1.18.3.5.9.12.6.1.1`
wfX25PadPortStatSlotInstance ID Slot, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.6.1.2`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.6.1.2`
wfX25PadPortStatConnectorInstance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.ro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.6.1.3`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.6.1.3`
wfX25PadPortStatNumberInstance ID Async Port, filled in by ISDB mib gatero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.6.1.4`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.6.1.4`
wfX25PadPortStatRxOctetsNumber of octets received on this async portro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.5`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.5`
wfX25PadPortStatTxOctetsNumber of octets transmitted on this async portro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.6`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.6`
wfX25PadPortStatRxPacketsNumber of packets received on this async portro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.7`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.7`
wfX25PadPortStatTxPacketsNumber of packets transmitted on this async portro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.8`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.8`
wfX25PadPortStatRemoteX121AddrRemote X.121 addressro DisplayString `.1.3.6.1.4.1.18.3.5.9.12.6.1.9`	DisplayString	`.1.3.6.1.4.1.18.3.5.9.12.6.1.9`
wfX25PadPortStatLCNCurrent connection's logical channel numberro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.6.1.10`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.6.1.10`
wfX25PadPortStatDurationTime in seconds of the callro INTEGER `.1.3.6.1.4.1.18.3.5.9.12.6.1.11`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.6.1.11`
wfX25PadPortStatRxRRNumber of receiver ready packets receivedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.12`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.12`
wfX25PadPortStatTxRRNumber of receiver ready packets transmittedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.13`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.13`
wfX25PadPortStatRxRNRNumber of receiver not ready packets receivedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.14`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.14`
wfX25PadPortStatTxRNRNumber of receiver not ready packets transmittedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.15`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.15`
wfX25PadPortStatRxClrNumber of call clear packets receivedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.16`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.16`
wfX25PadPortStatTxClrNumber of call clear packets transmittedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.17`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.17`
wfX25PadPortStatRxResetNumber of reset packets receivedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.18`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.18`
wfX25PadPortStatTxResetNumber of reset packets transmittedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.19`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.19`
wfX25PadPortStatRxCallNumber of call request packets receivedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.20`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.20`
wfX25PadPortStatTxCallNumber of call request packets transmittedro Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.21`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.21`
wfX25PadPortStatConnectionsNumber of connections madero Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.22`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.22`
wfX25PadPortStatDisconnectsNumber of disconnects madero Counter `.1.3.6.1.4.1.18.3.5.9.12.6.1.23`	Counter	`.1.3.6.1.4.1.18.3.5.9.12.6.1.23`
wfX25PadPortStatLastCauseLast cause codero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.6.1.24`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.6.1.24`
wfX25PadPortStatLastDiagLast diag codero INTEGER `.1.3.6.1.4.1.18.3.5.9.12.6.1.25`	INTEGER	`.1.3.6.1.4.1.18.3.5.9.12.6.1.25`
wfX25PadDefaultCfgEntryAn entry in the X25 Pad Config Table WfX25PadDefaultCfgEntry `.wfX25PadDefaultCfgTable.1`	WfX25PadDefaultCfgEntry	`.wfX25PadDefaultCfgTable.1`
wfX25PadDefaultCfgDeleteCreate/Delete parameterrw Enumeration `.wfX25PadDefaultCfgTable.1.1`	Enumeration	`.wfX25PadDefaultCfgTable.1.1`
wfX25PadDefaultCfgDisableEnable/Disable parameterrw Enumeration `.wfX25PadDefaultCfgTable.1.2`	Enumeration	`.wfX25PadDefaultCfgTable.1.2`
wfX25PadDefaultCfgStateCurrent state of X.25 PAD sofware on the I-SDBro Enumeration `.wfX25PadDefaultCfgTable.1.3`	Enumeration	`.wfX25PadDefaultCfgTable.1.3`
wfX25PadDefaultCfgSlotInstance ID Slot, filled in by ISDB mib gatero INTEGER `.wfX25PadDefaultCfgTable.1.4`	INTEGER	`.wfX25PadDefaultCfgTable.1.4`
wfX25PadDefaultCfgConnectorInstance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot.ro INTEGER `.wfX25PadDefaultCfgTable.1.5`	INTEGER	`.wfX25PadDefaultCfgTable.1.5`
wfX25PadDefaultCfgCircuitCircuit number, filled in by ISDB mib gatero INTEGER `.wfX25PadDefaultCfgTable.1.6`	INTEGER	`.wfX25PadDefaultCfgTable.1.6`
wfX25PadDefaultCfgX121AddrX.121 address of the X.25 Padrw DisplayString `.wfX25PadDefaultCfgTable.1.7`	DisplayString	`.wfX25PadDefaultCfgTable.1.7`
wfX25PadDefaultCfgDNICData Network Identification Coderw DisplayString `.wfX25PadDefaultCfgTable.1.8`	DisplayString	`.wfX25PadDefaultCfgTable.1.8`
wfX25PadDefaultCfgLenSubAddressLength of X.121 subaddressrw INTEGER `.wfX25PadDefaultCfgTable.1.9`	INTEGER	`.wfX25PadDefaultCfgTable.1.9`
wfX25PadDefaultCfgLCNLowLower range for logical channel numbersrw INTEGER `.wfX25PadDefaultCfgTable.1.10`	INTEGER	`.wfX25PadDefaultCfgTable.1.10`
wfX25PadDefaultCfgLCNHighUpper range for logical channel numbersrw INTEGER `.wfX25PadDefaultCfgTable.1.11`	INTEGER	`.wfX25PadDefaultCfgTable.1.11`

Wellfleet-X25PAD-MIB - SNMP MIB Reference | MIBs Explorer