Wellfleet-Series7-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
853
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
853 total| Object Name |
|---|
wellfleet OBJECT IDENTIFIER .1.3.6.1.4.1.18 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18 |
wfSwSeries7 OBJECT IDENTIFIER .1.3.6.1.4.1.18.3 |
wfHardwareConfig OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.1 |
wfHwBase OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.1.1 |
wfHwBpIdOptThe BackPlane identification number.ro Enumeration .1.3.6.1.4.1.18.3.1.1.1 |
wfHwBpRevThe revision level of the BackPlane. High byte is in upper 2 bytes.ro OCTET STRING .1.3.6.1.4.1.18.3.1.1.2 |
wfHwBpSerialNumberThe serial number of the BackPlane.ro OCTET STRING .1.3.6.1.4.1.18.3.1.1.3 |
wfBCNPwrSupply1Status of BCN Hot-Swappable Power Supply 1ro Enumeration .1.3.6.1.4.1.18.3.1.1.4 |
wfBCNPwrSupply2Status of BCN Hot-Swappable Power Supply 2ro Enumeration .1.3.6.1.4.1.18.3.1.1.5 |
wfBCNPwrSupply3Status of BCN Hot-Swappable Power Supply 3ro Enumeration .1.3.6.1.4.1.18.3.1.1.6 |
wfBCNPwrSupply4Status of BCN Hot-Swappable Power Supply 4ro Enumeration .1.3.6.1.4.1.18.3.1.1.7 |
wfBCNFanStatusStatus of BCN Fan Trayro Enumeration .1.3.6.1.4.1.18.3.1.1.8 |
wfBCNTemperatureStatus of BCN Fan Trayro Enumeration .1.3.6.1.4.1.18.3.1.1.9 |
wfHwTableHardware Table - indexed by slot number SEQUENCE OF WfHwEntry .1.3.6.1.4.1.18.3.1.2 |
wfHwEntryHardware specific information about a slot. WfHwEntry .1.3.6.1.4.1.18.3.1.2.1 |
wfHwSlotA unique value for each slot.
Its value ranges between 1 and 14.
There are products in this family that contain 1, 5, and 14 slots.ro INTEGER .1.3.6.1.4.1.18.3.1.2.1.1 |
wfHwModIdOptThe module identification number.
Port Configurations
HWStat Name Enet Sync Async Token Framer Fiber
- -
1 ENET-1 2 0 0 0 0 0
8 ENET-2 2 0 0 0 0 0
16 SYNC-1 0 4 1 0 0 0
17 SYNC-1 [1] 0 4 1 0 0 0
24 T1-1 0 2 1 0 2 0
32 DSE-1 1 2 1 0 0 0
33 DSE-1 [1] 1 2 1 0 0 0
40 DST-4/16 0 2 1 1 0 0
41 SST-4/16 [1] 0 1 1 1 0 0
42 DST-4 0 2 1 1 0 0
43 SST-4 [1] 0 1 1 1 0 0
44 SST-4/16 0 1 1 1 0 0
45 STOK-4/16 [3] 0 0 0 1 0 0
46 SST-4 0 1 1 1 0 0
47 STOK-4 [3] 0 0 0 1 0 0
48 FLOPPY 0 0 0 0 0 0
56 T1-2 0 2 1 0 2 0
57 T1-2 0 2 1 0 2 0
58 ST1 0 1 1 0 1 0
60 T1-56K 0 1 1 0 1 0
61 E1 [3] 0 2 0 0 2 0
62 ST1-56K 0 1 1 0 1 0
63 SE1 [3] 0 1 0 0 1 0
64 T1-2n 0 2 1 0 2 0
65 ST1n 0 1 1 0 1 0
66 T1-56Kn 0 1 1 0 1 0
67 ST1-56Kn 0 1 1 0 1 0
68 E1n [3] 0 2 0 0 2 0
69 SE1n [3] 0 1 0 0 1 0
80 SYNC-2 0 4 1 0 0 0
81 SYNC-2 [1] 0 4 1 0 0 0
88 CMC-FDDI [6] 0 0 0 0 0 1
89 IPHASE-FDDI [6] 0 0 0 0 0 1
104 DT 0 0 0 2 0 0
112 DSDE-1 2 2 1 0 0 0
113 DSDE-1 [1] 2 2 1 0 0 0
114 ENET 2 0 0 0 0 0
116 DSE-2 1 2 1 0 0 0
117 DSE-2 [1] 1 2 1 0 0 0
118 SSE 1 1 1 0 0 0
119 SSE [1] 1 1 1 0 0 0
120 DSDE10BT 2 2 0 0 0 0
132 ENET-3 [2] 2 0 0 0 0 0
156 DSDE-2 [2] 2 2 1 0 0 0
160 QE/NF 4 0 0 0 0 0
161 DE/NF [5] 2 0 0 0 0 0
162 QE/NF 4 0 0 0 0 0
164 QE/F [4] 4 0 0 0 0 0
165 DE/F [4,5] 2 0 0 0 0 0
168 MCT1 0 2 Munich 0 0 2 0
176 DTOK 0 0 0 2 0 0
168 MCE1 0 2 Munich 0 0 2 0
192 WF_FDDI_2M 0 0 0 0 0 1
193 WF_FDDI_1M 0 0 0 0 0 1
194 WF_FDDI_2S 0 0 0 0 0 1
195 WF_FDDI_1S 0 0 0 0 0 1
196 WF_FDDI_2MF 0 0 0 0 0 1
197 WF_FDDI_1MF 0 0 0 0 0 1
198 WF_FDDI_2SF 0 0 0 0 0 1
199 WF_FDDI_1SF 0 0 0 0 0 1
208 FNSDSE [7] 1 2 0 0 0 0
216 FNSDSDT [7] 0 2 0 2 0 0
217 FNSDST [7] 0 2 0 1 0 0
224 DHSSI 0 2 hssi 0 0 0 0
225 SHSSI 0 1 hssi 0 0 0 0
8448 SRML 0 0 0 0 0 0
NOTES:
[1] Indicates Module has COM Port 1 configured for ASYNC.
The AM8530's port B is configured for COM1.
[2] This Module contains the DEFA - Hardware Filtering. CAMS
must be programmed (can contain 2 - 6 CAMS onboard).
[3] The AM8530 has been removed (depopulated) from this module.
Programming this device should not be performed.
[4] Contains Dual Defa hardware. (Can be depopulated)
[5] Depop'd two ports of hardware to make Dual Ethernet module.
[6] These are FDDI modules. The ID cannot be read from the Link
module I/O space.
[7] These are FNS Platform Integrated 'Modules' - Cannot be detached
or be used by any other platform.ro Enumeration .1.3.6.1.4.1.18.3.1.2.1.2 |
wfHwModRevThe revision level of the module. High byte is in upper 2 bytes.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.3 |
wfHwModSerialNumberThe serial number of the module.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.4 |
wfHwMotherBdIdOptThe mother board identification number.ro Enumeration .1.3.6.1.4.1.18.3.1.2.1.5 |
wfHwMotherBdRevThe revision level of the mother board. High byte is in upper 2 bytes.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.6 |
wfHwMotherBdSerialNumberThe serial number of the mother board.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.7 |
wfHwDaughterBdIdOptThe daughter board identification number.ro Enumeration .1.3.6.1.4.1.18.3.1.2.1.8 |
wfHwDaughterBdRevThe revision level of the daughter board. High byte is in upper 2 bytes.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.9 |
wfHwDaughterBdSerialNumberThe serial number of the daughter board.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.10 |
wfHwBabyBdIdOptThe baby board identification number.ro INTEGER .1.3.6.1.4.1.18.3.1.2.1.11 |
wfHwBabyBdRevThe revision level of the baby board. High byte is in upper 2 bytes.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.12 |
wfHwBabyBdSerialNumberThe serial number of the baby board.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.13 |
wfHwDiagPromRevThe revision level of the Diagnostic PROM. Major revision level
is in the upper 2 bytes, minor revision level in the lower 2 bytes.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.14 |
wfHwDiagPromDateThe creation date of the Diagnostic PROMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.1.2.1.15 |
wfHwDiagPromSourceThe origin of the Diagnostic PROM contentsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.1.2.1.16 |
wfHwBootPromRevThe revision level of the BOOT PROM. Major revision level
is in the upper 2 bytes, minor revision level in the lower 2 bytes.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.17 |
wfHwBootPromDateThe creation date of the Boot PROMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.1.2.1.18 |
wfHwBootPromSourceThe origin of the Boot PROM contentsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.1.2.1.19 |
wfHwSparePromRevThe revision level of the BOOT PROM. Major revision level
is in the upper 2 bytes, minor revision level in the lower 2 bytes.ro OCTET STRING .1.3.6.1.4.1.18.3.1.2.1.20 |
wfHwSparePromDateThe creation date of the Spare PROMro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.1.2.1.21 |
wfHwSparePromSourceThe origin of the Spare PROM contentsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.1.2.1.22 |
wfHwFileSysPresentFlag indicating presence of File System on this slot.ro Enumeration .1.3.6.1.4.1.18.3.1.2.1.23 |
wfSoftwareConfig OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.2 |
wfSystem OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.3 |
wfServices OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.3.2 |
wfConsole OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.3.2.1 |
wfBaudRateBaud rate configured on the Technician Interface consolerw INTEGER .1.3.6.1.4.1.18.3.3.2.1.1 |
wfDataBitsNumber of data bits configured on the Technician Interface consolerw INTEGER .1.3.6.1.4.1.18.3.3.2.1.2 |
wfParityType of parity configured on the Technician Interface consolerw Enumeration .1.3.6.1.4.1.18.3.3.2.1.3 |
wfStopBitsNumber of stop bits configured on the Technician Interface consolerw Enumeration .1.3.6.1.4.1.18.3.3.2.1.4 |
wfModemEnableEnable the Technician Interface console to run over a modemrw Enumeration .1.3.6.1.4.1.18.3.3.2.1.5 |
wfLinesPerScreenNumber of lines which can be displayed in one screen on the Technician
Interface consolerw INTEGER .1.3.6.1.4.1.18.3.3.2.1.6 |
wfMoreEnableEnable the 'more' feature on the Technician Interface consolerw Enumeration .1.3.6.1.4.1.18.3.3.2.1.7 |
wfPromptCharacter string which will be used as the system prompt on
the Technician Interface consolerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.1.8 |
wfLoginTimeOutIF MODEM_ENABLED then time out in minutes to HUP when at the login promptrw Enumeration .1.3.6.1.4.1.18.3.3.2.1.9 |
wfPasswordTimeOutTimout on Password entryrw Enumeration .1.3.6.1.4.1.18.3.3.2.1.10 |
wfCommandTimeOutIF MODEM_ENABLED then time out in minutes to HUP when at the command promptrw Enumeration .1.3.6.1.4.1.18.3.3.2.1.11 |
wfLoginRetriesIF MODEM_ENABLED then limit # of login attempts then HUPrw Enumeration .1.3.6.1.4.1.18.3.3.2.1.12 |
wfTotalLoginsTotal number of TI login attemptsro Counter .1.3.6.1.4.1.18.3.3.2.1.13 |
wfUserLoginErrorsTotal number of FAILED User login attemptsro Counter .1.3.6.1.4.1.18.3.3.2.1.14 |
wfManagerLoginErrorsTotal number of FAILED Manager login attemptsro Counter .1.3.6.1.4.1.18.3.3.2.1.15 |
wfOtherLoginErrorsTotal number of FAILED Other login attemptsro Counter .1.3.6.1.4.1.18.3.3.2.1.16 |
wfTtyFrameErrorsCount of TTY Frame errorsro Counter .1.3.6.1.4.1.18.3.3.2.1.17 |
wfTtyOverrunErrorsCount of TTY Overrun errorsro Counter .1.3.6.1.4.1.18.3.3.2.1.18 |
wfTtyParityErrorsCount of TTY Parity errorsro Counter .1.3.6.1.4.1.18.3.3.2.1.19 |
wfTtyInfifoErrorsCount of TTY Input Fifo errorsro Counter .1.3.6.1.4.1.18.3.3.2.1.20 |
wfCircuitNameTableThe table of circuit names SEQUENCE OF WfCircuitNameEntry .1.3.6.1.4.1.18.3.3.2.3 |
wfCircuitNameEntryEntry format for the table of circuit names WfCircuitNameEntry .1.3.6.1.4.1.18.3.3.2.3.1 |
wfCircuitNameDeleteCreation and deletion flag for this recordrw Enumeration .1.3.6.1.4.1.18.3.3.2.3.1.1 |
wfCircuitNumbercircuit numberro INTEGER .1.3.6.1.4.1.18.3.3.2.3.1.2 |
wfCircuitNamecircuit namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.3.1.3 |
wfCircuitIfTypecircuit interface typerw Enumeration .1.3.6.1.4.1.18.3.3.2.3.1.4 |
wfCircuitProtoMapThe Circuit-Protocol maskrw OCTET STRING .1.3.6.1.4.1.18.3.3.2.3.1.5 |
wfGameGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.3.2.5 |
wfKernelTableTable of kernel statistics, indexed by slot number SEQUENCE OF WfKernelEntry .1.3.6.1.4.1.18.3.3.2.5.1 |
wfKernelEntryA particular interface WfKernelEntry .1.3.6.1.4.1.18.3.3.2.5.1.1 |
wfKernelSlotThe slot number indexes the kernel statistics tablero INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.1 |
wfKernelMemorySizeThe total size of allocatable memory, in bytesro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.2 |
wfKernelMemoryFreeThe amount of memory which hasn't been allocated yet, in bytesro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.3 |
wfKernelMemorySegsTotalTotal number of memory segments in the kernelro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.4 |
wfKernelMemorySegsFreeTotal number of unallocated memory segments in the kernelro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.5 |
wfKernelMemoryMaxSegFreeSize of the largest unallocated memory segmentro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.6 |
wfKernelBuffersTotalTotal number of packet buffersro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.7 |
wfKernelBuffersFreeNumber of packet buffers in the free poolro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.8 |
wfKernelTasksTotalNumber of tasks runningro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.9 |
wfKernelTasksInQueueNumber of tasks awaiting schedulingro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.10 |
wfKernelTimersTotalTotal number of timers availablero INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.11 |
wfKernelTimersActiveTotal number of timers in use by tasksro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.12 |
wfKernelBufOwnerTask1Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.13 |
wfKernelBufOwnerTask1BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.14 |
wfKernelBufOwnerTask2Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.15 |
wfKernelBufOwnerTask2BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.16 |
wfKernelBufOwnerTask3Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.17 |
wfKernelBufOwnerTask3BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.18 |
wfKernelBufOwnerTask4Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.19 |
wfKernelBufOwnerTask4BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.20 |
wfKernelBufOwnerTask5Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.21 |
wfKernelBufOwnerTask5BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.22 |
wfKernelBufOwnerTask6Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.23 |
wfKernelBufOwnerTask6BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.24 |
wfKernelBufOwnerTask7Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.25 |
wfKernelBufOwnerTask7BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.26 |
wfKernelBufOwnerTask8Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.27 |
wfKernelBufOwnerTask8BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.28 |
wfKernelBufOwnerTask9Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.29 |
wfKernelBufOwnerTask9BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.30 |
wfKernelBufOwnerTask10Activation address of task which owns many buffersro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.31 |
wfKernelBufOwnerTask10BufsNumber of buffers owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.32 |
wfKernelMemOwnerTask1Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.33 |
wfKernelMemOwnerTask1SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.34 |
wfKernelMemOwnerTask2Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.35 |
wfKernelMemOwnerTask2SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.36 |
wfKernelMemOwnerTask3Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.37 |
wfKernelMemOwnerTask3SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.38 |
wfKernelMemOwnerTask4Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.39 |
wfKernelMemOwnerTask4SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.40 |
wfKernelMemOwnerTask5Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.41 |
wfKernelMemOwnerTask5SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.42 |
wfKernelMemOwnerTask6Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.43 |
wfKernelMemOwnerTask6SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.44 |
wfKernelMemOwnerTask7Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.45 |
wfKernelMemOwnerTask7SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.46 |
wfKernelMemOwnerTask8Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.47 |
wfKernelMemOwnerTask8SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.48 |
wfKernelMemOwnerTask9Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.49 |
wfKernelMemOwnerTask9SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.50 |
wfKernelMemOwnerTask10Activation address of task which owns a sizable amount of memoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.5.1.1.51 |
wfKernelMemOwnerTask10SizeAmount of memory owned by the taskro INTEGER .1.3.6.1.4.1.18.3.3.2.5.1.1.52 |
wfLine OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4 |
wfCSMACDTableCSMA/CD line record SEQUENCE OF WfCSMACDEntry .1.3.6.1.4.1.18.3.4.1 |
wfCSMACDEntryAn entry in the csmacd table WfCSMACDEntry .1.3.6.1.4.1.18.3.4.1.1 |
wfCSMACDDeletecreate/delete parameter, dflt = createdrw Enumeration .1.3.6.1.4.1.18.3.4.1.1.1 |
wfCSMACDEnableenable/disable parameter, dflt = enabledrw Enumeration .1.3.6.1.4.1.18.3.4.1.1.2 |
wfCSMACDStateline driver state variable, Not Present, Init, Down, Upro Enumeration .1.3.6.1.4.1.18.3.4.1.1.3 |
wfCSMACDSlotinstance ID Slot, filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.1.1.4 |
wfCSMACDConnectorinstance ID Connector, filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.1.1.5 |
wfCSMACDCctcct number for this line instancerw Enumeration .1.3.6.1.4.1.18.3.4.1.1.6 |
wfCSMACDBoflbofl parameter, dflt = enabledrw Enumeration .1.3.6.1.4.1.18.3.4.1.1.7 |
wfCSMACDBoflTmobofl parameter, dflt = 5rw Enumeration .1.3.6.1.4.1.18.3.4.1.1.8 |
wfCSMACDMtumtu parameter, fixedro Enumeration .1.3.6.1.4.1.18.3.4.1.1.9 |
wfCSMACDMadrline MAC address, fixed - line driver fills inro OCTET STRING .1.3.6.1.4.1.18.3.4.1.1.10 |
wfCSMACDOctetsRxOkNumber of octets received without errorro Counter .1.3.6.1.4.1.18.3.4.1.1.11 |
wfCSMACDFramesRxOkNumber of frames received without errorro Counter .1.3.6.1.4.1.18.3.4.1.1.12 |
wfCSMACDOctetsTxOkNumber of octets transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.1.1.13 |
wfCSMACDFramesTxOkNumber of frames transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.1.1.14 |
wfCSMACDDeferredTxNumber of deferred transmissionsro Counter .1.3.6.1.4.1.18.3.4.1.1.15 |
wfCSMACDLateCollnTxNumber of late collisionsro Counter .1.3.6.1.4.1.18.3.4.1.1.16 |
wfCSMACDExcessvCollnTxNumber of excessive collisionsro Counter .1.3.6.1.4.1.18.3.4.1.1.17 |
wfCSMACDBablErrorTxNumber of frames transmitted larger than 1518 octetsro Counter .1.3.6.1.4.1.18.3.4.1.1.18 |
wfCSMACDBufErrorTxNumber of internal buffer errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.19 |
wfCSMACDLcarTxNumber of loss of carrier errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.20 |
wfCSMACDUfloTxNumber of transmitter underflow errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.21 |
wfCSMACDFcsErrorRxNumber of receiver checksum errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.22 |
wfCSMACDAlignErrorRxNumber of receiver alignment errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.23 |
wfCSMACDLackRescErrorRxNumber of receiver lack of resource errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.24 |
wfCSMACDTooLongErrorRxNumber of frames received exceeding 1518 octetsro Counter .1.3.6.1.4.1.18.3.4.1.1.25 |
wfCSMACDOfloRxNumber of receiver overflow errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.26 |
wfCSMACDMerrNumber of internal memory errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.27 |
wfCSMACDCerrNumber of collision errorsro Counter .1.3.6.1.4.1.18.3.4.1.1.28 |
wfCSMACDHardwareFilterHardware filtering parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.1.1.29 |
wfCSMACDTxQueueLengthTransmit Queue Length, values larger than the compiled ring size
are truncated to the compiled ring size.rw Enumeration .1.3.6.1.4.1.18.3.4.1.1.30 |
wfCSMACDRxQueueLengthReceive Queue Length, values larger than the compiled ring size
are truncated to the compiled ring size.rw Enumeration .1.3.6.1.4.1.18.3.4.1.1.31 |
wfCSMACDTxClipFramesNumber of frames clipped in driver's transmit routine due to transmit
congestion.ro Counter .1.3.6.1.4.1.18.3.4.1.1.32 |
wfCSMACDRxReplenMissesNumber of packet buffer misses while attempting to replenish driver
receive ring.ro Counter .1.3.6.1.4.1.18.3.4.1.1.33 |
wfFddiTableFDDI line record SEQUENCE OF WfFddiEntry .1.3.6.1.4.1.18.3.4.4 |
wfFddiEntryAn entry in the FDDI table WfFddiEntry .1.3.6.1.4.1.18.3.4.4.1 |
wfFDDIDeletecreate/delete parameter, default = createdrw Enumeration .1.3.6.1.4.1.18.3.4.4.1.1 |
wfFDDIEnableenable/disable parameter, default = enabledrw Enumeration .1.3.6.1.4.1.18.3.4.4.1.2 |
wfFDDIStateline driver state variable, not present, init, down, upro Enumeration .1.3.6.1.4.1.18.3.4.4.1.3 |
wfFDDISlotinstance ID slot - filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.4.1.4 |
wfFDDINodeinstance ID Node - filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.4.1.5 |
wfFDDICctcct number for this line instancerw Enumeration .1.3.6.1.4.1.18.3.4.4.1.6 |
wfFDDIBoflbofl parameter, default = enabledrw Enumeration .1.3.6.1.4.1.18.3.4.4.1.7 |
wfFDDIBoflTmobofl parameter, default = 5 secondsrw Enumeration .1.3.6.1.4.1.18.3.4.4.1.8 |
wfFDDIMtumtu parameter, fixedro Enumeration .1.3.6.1.4.1.18.3.4.4.1.9 |
wfFDDIMadrline MAC address, fixed - line driver fills inro OCTET STRING .1.3.6.1.4.1.18.3.4.4.1.10 |
wfFDDIOctetsRxOkNumber of bytes received without errorro Counter .1.3.6.1.4.1.18.3.4.4.1.11 |
wfFDDIFramesRxOkNumber of frames received without errorro Counter .1.3.6.1.4.1.18.3.4.4.1.12 |
wfFDDIOctetsTxOkNumber of bytes transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.4.1.13 |
wfFDDIFramesTxOkNumber of frames transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.4.1.14 |
wfFDDICrcErrRxNumber of frames received with CRC errorsro Counter .1.3.6.1.4.1.18.3.4.4.1.15 |
wfFDDIOverrunRxNumber of frames received with internal overrun errorsro Counter .1.3.6.1.4.1.18.3.4.4.1.16 |
wfFDDIParityErrRxNumber of frames received with parity errorsro Counter .1.3.6.1.4.1.18.3.4.4.1.17 |
wfFDDIMacErrRxNumber of frames received with mac errorsro Counter .1.3.6.1.4.1.18.3.4.4.1.18 |
wfFDDIRingErrRxNumber of receive ring error eventsro Counter .1.3.6.1.4.1.18.3.4.4.1.19 |
wfFDDISmtRingErrRxNumber of SMT receive ring error eventsro Counter .1.3.6.1.4.1.18.3.4.4.1.20 |
wfFDDIRingOverrunRxNumber of LLC receive ring overrun eventsro Counter .1.3.6.1.4.1.18.3.4.4.1.21 |
wfFDDISmtRingOverrunRxNumber of SMT receive ring overrun eventsro Counter .1.3.6.1.4.1.18.3.4.4.1.22 |
wfFDDIAbortTxNumber of transmit frames with internal abort errorsro Counter .1.3.6.1.4.1.18.3.4.4.1.23 |
wfFDDIUnderrunTxNumber of transmit frames aborted with underrun errorsro Counter .1.3.6.1.4.1.18.3.4.4.1.24 |
wfFDDIParityErrTxNumber of transmit frames aborted with parity errorsro Counter .1.3.6.1.4.1.18.3.4.4.1.25 |
wfFDDIRingErrTxNumber of LLC/SMT transmit ring error eventsro Counter .1.3.6.1.4.1.18.3.4.4.1.26 |
wfFDDIPortOpErrNumber of port operation error eventsro Counter .1.3.6.1.4.1.18.3.4.4.1.27 |
wfFDDIInternOpErrNumber of internal operation error eventsro Counter .1.3.6.1.4.1.18.3.4.4.1.28 |
wfFDDIHostErrNumber of host error eventsro Counter .1.3.6.1.4.1.18.3.4.4.1.29 |
wfFDDISmtConnectionPolicyA value that indicates the connection policies
enforced at the station. A station sets the
corresponding policy for each of the connection
types that it rejects. The letter designations, X
and Y, in the 'rejectX-Y' names have the following
significance: X represents the PC-Type of the
local PORT and Y represents a PC-Neighbor in the
evaluation of Connection-Policy (PC-Type, PC-
Neighbor) that is done to determine the setting of
T-Val(3) in the PC-Signaling sequence.
The value is a sum. This value initially takes
the value zero, then for each of the connection
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
rejectA-A 0
rejectA-B 1
rejectA-S 2
rejectA-M 3
rejectB-A 4
rejectB-B 5
rejectB-S 6
rejectB-M 7
rejectS-A 8
rejectS-B 9
rejectS-S 10
rejectS-M 11
rejectM-A 12
rejectM-B 13
rejectM-S 14
rejectM-M 15rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.30 |
wfFDDISmtTNotifyThe timer used in the Neighbor Notification
protocol, reported in seconds and ranging from 2
to 30 seconds.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.31 |
wfFDDIMacTReqThe requested Target Token Rotation Time (TTRT)
for a MAC's synchronous traffic represented in
unsigned integer specifying time in octet units
(80 nanoseconds).rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.32 |
wfFDDIMacTMaxThe requested maximum TTRT to be supported by a
MAC represented in unsigned integer specifying
time in octet units (80 nanoseconds).ro Enumeration .1.3.6.1.4.1.18.3.4.4.1.33 |
wfFDDIMacTvxValueThe requested value of TvxValue represented in
unsigned integer specifying time in octet units
(80 nanoseconds).ro Enumeration .1.3.6.1.4.1.18.3.4.4.1.34 |
wfFDDIMacTMinThe requested minimum TTRT to be requested by a
MAC represented in unsigned integer specifying
time in octet units (80 nanoseconds).ro Enumeration .1.3.6.1.4.1.18.3.4.4.1.35 |
wfFDDIHardwareFilterHardware filter (CAM) parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.36 |
wfFDDISmtEnablerw Enumeration .1.3.6.1.4.1.18.3.4.4.1.37 |
wfFDDITxQueueLengthTransmit Queue Length, values larger than the compiled ring size
are truncated to the compiled ring size.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.38 |
wfFDDIRxQueueLengthReceive Queue Length, values larger than the compiled ring size
are truncated to the compiled ring size.rw Enumeration .1.3.6.1.4.1.18.3.4.4.1.39 |
wfFDDITxClipFramesNumber of frames clipped in driver's transmit routine due to transmit
congestion.ro Counter .1.3.6.1.4.1.18.3.4.4.1.40 |
wfFDDIRxReplenMissesNumber of packet buffer misses while attempting to replenish driver
receive ring.ro Counter .1.3.6.1.4.1.18.3.4.4.1.41 |
wfHwFGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.6 |
wfHwfTableThe following table will contain information about a collection of
Hardware Filter (HWF) driver records.
Only one HWF driver may be spawned, by the loader, on a given slot.
Hence, only the slot number is used as the instance identifier into
the table. SEQUENCE OF WfHwfEntry .1.3.6.1.4.1.18.3.4.6.1 |
wfHwfEntrySlot number used as instance identifier. WfHwfEntry .1.3.6.1.4.1.18.3.4.6.1.1 |
wfHwfDeleteCreate/delete parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.6.1.1.1 |
wfHwfEnableEnable/disable parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.6.1.1.2 |
wfHwfStateDriver state variable.ro Enumeration .1.3.6.1.4.1.18.3.4.6.1.1.3 |
wfHssiTableHSSI line record SEQUENCE OF WfHssiEntry .1.3.6.1.4.1.18.3.4.7 |
wfHssiEntryAn entry in the HSSI table WfHssiEntry .1.3.6.1.4.1.18.3.4.7.1 |
wfHssiDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.1 |
wfHssiDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.2 |
wfHssiStateLine Driver state variable, Not Present, Init, Down, Upro Enumeration .1.3.6.1.4.1.18.3.4.7.1.3 |
wfHssiSlotInstance ID Slot, filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.7.1.4 |
wfHssiConnectorInstance ID Connector, filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.7.1.5 |
wfHssiCctCCT number for this line instancerw Enumeration .1.3.6.1.4.1.18.3.4.7.1.6 |
wfHssiBoflbreath of life parameterrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.7 |
wfHssiBoflTmobreath of life frequency in secondsrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.8 |
wfHssiMtuMTU parameter, this is buffer size for HSSI media, fixedrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.9 |
wfHssiMadrLine MAC address, fixed - line driver fills in from the 48 bit
address stored in the serial number prom for this connector.ro OCTET STRING .1.3.6.1.4.1.18.3.4.7.1.10 |
wfHssiServiceService type for this circuit. Transparent is raw HDLC mode, and is the
only service provided on the current HSSI productrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.11 |
wfHssiWanProtocolWAN protocol selection is provided via this parameter. The
supported protocols can be selected per interface.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.12 |
wfHssiTransmissionInterfaceT1 or T3, in the future OC1, OC3 and OC12. Used for MIB selectionrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.13 |
wfHssiExternalClkSpeedExternal Clock Speed, Used in the future for route selectionrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.14 |
wfHssiCrcSizeCRC size parameter, 16 bit standard CCITT or extended 32 bit CRCrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.15 |
wfHssiInternalClkTestModeEnables internal transmit clock generation. Should NEVER be enabled for
normal operation.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.16 |
wfHssiRxOctetsNumber of bytes received without errorro Counter .1.3.6.1.4.1.18.3.4.7.1.17 |
wfHssiRxFramesNumber of frames received without errorro Counter .1.3.6.1.4.1.18.3.4.7.1.18 |
wfHssiTxOctetsNumber of bytes transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.7.1.19 |
wfHssiTxFramesNumber of frames transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.7.1.20 |
wfHssiInDiscardsNumber of error-free inbound packets discarded. Usually due to lack of
memory resources.ro Counter .1.3.6.1.4.1.18.3.4.7.1.21 |
wfHssiInErrorsNumber of inbound packets not delivered to higher-layer protocol because
of errors.ro Counter .1.3.6.1.4.1.18.3.4.7.1.22 |
wfHssiOutDiscardsNumber of error-free outbound packets discarded. Usually due to lack of
transmission bandwidth.ro Counter .1.3.6.1.4.1.18.3.4.7.1.23 |
wfHssiOutErrorsNumber of outbound packets that could not be transmitted because of
errors.ro Counter .1.3.6.1.4.1.18.3.4.7.1.24 |
wfHssiRxLongFramesNumber of Long frames dropped on receive because of lengthro Counter .1.3.6.1.4.1.18.3.4.7.1.25 |
wfHssiTxClipFramesNumber of frames clipped in the transmit routinero Counter .1.3.6.1.4.1.18.3.4.7.1.26 |
wfHssiRxReplenMissesNumber of failed attempts by the line driver to aquire a packet bufferro Counter .1.3.6.1.4.1.18.3.4.7.1.27 |
wfHssiLastRxErrorCtrlLast errored receive descriptor's control fieldro INTEGER .1.3.6.1.4.1.18.3.4.7.1.28 |
wfHssiRxCrcErrorsNumber of frames received with CRC errorsro Counter .1.3.6.1.4.1.18.3.4.7.1.29 |
wfHssiRxOverrunsNumber of frames received with fifo overrun errorsro Counter .1.3.6.1.4.1.18.3.4.7.1.30 |
wfHssiRxAbortsNumber of frames received with abort statusro Counter .1.3.6.1.4.1.18.3.4.7.1.31 |
wfHssiLastTxErrorCtrlLast errored transmit descriptor's control fieldro INTEGER .1.3.6.1.4.1.18.3.4.7.1.32 |
wfHssiTxAbortsNumber of transmit frames with internal abort errorsro Counter .1.3.6.1.4.1.18.3.4.7.1.33 |
wfHssiTxUnderrunsNumber of transmit frames aborted with underrun errorsro Counter .1.3.6.1.4.1.18.3.4.7.1.34 |
wfHssiRxRingErrorsNumber of receive ring error eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.35 |
wfHssiLastRxRingStateLast 8 bit value from the recv ring state registerro INTEGER .1.3.6.1.4.1.18.3.4.7.1.36 |
wfHssiRxRingOverrunsNumber of receive ring overrun eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.37 |
wfHssiTxRingErrorsNumber of transmit ring error eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.38 |
wfHssiLastTxRingStateLast 8 bit value from the transmit ring state registerro INTEGER .1.3.6.1.4.1.18.3.4.7.1.39 |
wfHssiPortOpErrorsNumber of port operation error eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.40 |
wfHssiInternOpErrorsNumber of internal operation error eventsro Counter .1.3.6.1.4.1.18.3.4.7.1.41 |
wfHssiHostErrorsNumber of parity errs on host accesses to directly accessable registers.ro Counter .1.3.6.1.4.1.18.3.4.7.1.42 |
wfHssiRxProcessingsNumber of receive frame processings (RINT)ro Counter .1.3.6.1.4.1.18.3.4.7.1.43 |
wfHssiTxProcessingsNumber of transmit processings, invokations of transmit routinero Counter .1.3.6.1.4.1.18.3.4.7.1.44 |
wfHssiTxCmplProcessingsNumber of transmit complete processings (TINT)ro Counter .1.3.6.1.4.1.18.3.4.7.1.45 |
wfHssiIntrProcessingsNumber of Interrupt processings, invokations of intr routinero Counter .1.3.6.1.4.1.18.3.4.7.1.46 |
wfHssiBoflNumNumber of breath of life packets per breath of liferw Enumeration .1.3.6.1.4.1.18.3.4.7.1.47 |
wfHssiBoflLenbreath of life packet lengthrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.48 |
wfHssiRxBufferLengthPerformance tunning parameter controls Receive buffer size.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.49 |
wfHssiMemPageLengthPerformance tunning parameter controls device memory access burst length.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.50 |
wfHssiRxRingLengthPerformance tunning parameter controls the receive queue length.
Receive Queue Length, values larger than the compiled ring size
are truncated to the compiled ring size.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.51 |
wfHssiTxRingLengthPerformance tunning parameter controls the transmit queue length.
Transmit Queue Length, values larger than the compiled ring size
are truncated to the compiled ring size.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.52 |
wfHssiRxFifoWatermarkPerformance tunning parameter controls the receive watermark.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.53 |
wfHssiTxFifoWatermarkPerformance tunning parameter controls the transmit watermark.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.54 |
wfHssiMaxRxMemoryPerformance tunning parameter controls fifo area allowed for receive.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.55 |
wfHssiLinkInterfaceOnly for DEBUG.rw Enumeration .1.3.6.1.4.1.18.3.4.7.1.56 |
wfHssiTurboBoflOnly for DEBUG, Turbo breath of life parameterrw Enumeration .1.3.6.1.4.1.18.3.4.7.1.57 |
wfE1TableE1 line record SEQUENCE OF WfE1Entry .1.3.6.1.4.1.18.3.4.11 |
wfE1EntryAn entry in the E1 table WfE1Entry .1.3.6.1.4.1.18.3.4.11.1 |
wfE1Deletecreate/delete parameter, dflt = createdrw Enumeration .1.3.6.1.4.1.18.3.4.11.1.1 |
wfE1Disableenable/disable parameter, dflt = enabledrw Enumeration .1.3.6.1.4.1.18.3.4.11.1.2 |
wfE1Stateline driver state variable, Not Present, Init, Upro Enumeration .1.3.6.1.4.1.18.3.4.11.1.3 |
wfE1Slotinstance ID Slot, filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.11.1.4 |
wfE1Connectorinstance ID Connector, filled in by driverro Enumeration .1.3.6.1.4.1.18.3.4.11.1.5 |
wfE1MadrLine mac address, filled in by driverro OCTET STRING .1.3.6.1.4.1.18.3.4.11.1.6 |
wfE1HDB3SupportHDB3 Support - Enables or disables high density bipolar codingrw Enumeration .1.3.6.1.4.1.18.3.4.11.1.7 |
wfE1ClockModeClock Mode - Specifies the source of the E1 transmit clockrw Enumeration .1.3.6.1.4.1.18.3.4.11.1.8 |
wfE1MiniDacsMiniDacs Configuration - assigns each E1 channel to a specific
functionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.11.1.9 |
wfE1BipolarViosNumber of Bipolar Violationsro Counter .1.3.6.1.4.1.18.3.4.11.1.10 |
wfE1FrameErrsNumber of Frame errorsro Counter .1.3.6.1.4.1.18.3.4.11.1.11 |
wfE1RcvRemAlmsNumber of remote alarms receivedro Counter .1.3.6.1.4.1.18.3.4.11.1.12 |
wfE1RcvMfmAlmsNumber of Multiframe Alarms Receivedro Counter .1.3.6.1.4.1.18.3.4.11.1.13 |
wfE1MfsErrsNumber of instances of CAS Multiframe resync criteria metro Counter .1.3.6.1.4.1.18.3.4.11.1.14 |
wfE1SyncLossNumber of instances of sync lossro Counter .1.3.6.1.4.1.18.3.4.11.1.15 |
wfE1RcvSig1sNumber of instances of receive signalling all 1'sro Counter .1.3.6.1.4.1.18.3.4.11.1.16 |
wfE1RcvUnfrm1sNumber of instances of Receive unframed all 1'sro Counter .1.3.6.1.4.1.18.3.4.11.1.17 |
wfDs1Group OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.12 |
wfDs1ConfigThe DS1 Configuration table SEQUENCE OF WfDs1ConfigEntry .1.3.6.1.4.1.18.3.4.12.1 |
wfDs1ConfigEntryper circuit DS1 configuration objects; wfDs1LineIndex
corresponds to Wellfleet circuit number WfDs1ConfigEntry .1.3.6.1.4.1.18.3.4.12.1.1 |
wfDs1LineIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.12.1.1.1 |
wfDs1TimeElapsed1..900 seconds within the current 15-minute intervalro INTEGER .1.3.6.1.4.1.18.3.4.12.1.1.2 |
wfDs1ValidIntervals0..96 previous intervals that valid data
were collected. This is 96 unless the CSU
device was brought on line within the last 24
hours.ro INTEGER .1.3.6.1.4.1.18.3.4.12.1.1.3 |
wfDs1LineTypethe variety of DS1 implementing this circuitro Enumeration .1.3.6.1.4.1.18.3.4.12.1.1.4 |
wfDs1ZeroCodingthe variety of Zero Code Suppression used on the linkro Enumeration .1.3.6.1.4.1.18.3.4.12.1.1.5 |
wfDs1SendCodethe type of code being sent across the DS1 circuit by
the CSUro Enumeration .1.3.6.1.4.1.18.3.4.12.1.1.6 |
wfDs1CircuitIdentifierthe transmission vendor's circuit identifierro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.12.1.1.7 |
wfDs1LoopbackConfigthe loopback state of the CSUro Enumeration .1.3.6.1.4.1.18.3.4.12.1.1.8 |
wfDs1LineStatusthe state of the DS1 linero Enumeration .1.3.6.1.4.1.18.3.4.12.1.1.9 |
wfDs1CurrentThe DS1 Current table SEQUENCE OF WfDs1CurrentEntry .1.3.6.1.4.1.18.3.4.12.2 |
wfDs1CurrentEntryper circuit DS1 current objects - wfDs1CurrentIndex
corresponds to Wellfleet circuit number WfDs1CurrentEntry .1.3.6.1.4.1.18.3.4.12.2.1 |
wfDs1CurrentIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.12.2.1.1 |
wfDs1CurrentESsthe count of errored seconds in the current intervalro Counter .1.3.6.1.4.1.18.3.4.12.2.1.2 |
wfDs1CurrentSESsthe count of severely errored seconds in the
current intervalro Counter .1.3.6.1.4.1.18.3.4.12.2.1.3 |
wfDs1CurrentSEFsthe count of severely errored framing seconds in the current
intervalro Counter .1.3.6.1.4.1.18.3.4.12.2.1.4 |
wfDs1CurrentUASsthe number of unavailable seconds in the current intervalro Counter .1.3.6.1.4.1.18.3.4.12.2.1.5 |
wfDs1CurrentBPVsthe count of bipolar violations in the current intervalro Counter .1.3.6.1.4.1.18.3.4.12.2.1.6 |
wfDs1CurrentCVsthe count of code violation error events in the
current intervalro Counter .1.3.6.1.4.1.18.3.4.12.2.1.7 |
wfDs1IntervalThe DS1 Interval table SEQUENCE OF WfDs1IntervalEntry .1.3.6.1.4.1.18.3.4.12.3 |
wfDs1IntervalEntryper circuit DS1 interval objects - wfDs1IntervalIndex
corresponds to Wellfleet circuit number,
wfDs1IntervalNumber is the numbered previous
15-minute interval WfDs1IntervalEntry .1.3.6.1.4.1.18.3.4.12.3.1 |
wfDs1IntervalIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.12.3.1.1 |
wfDs1IntervalNumber1..96 where 1 is the most recent 15-minute interval and 96 is
the leastro Enumeration .1.3.6.1.4.1.18.3.4.12.3.1.2 |
wfDs1IntervalESsthe count of errored seconds in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.12.3.1.3 |
wfDs1IntervalSESsthe count of severely errored seconds in the specified
intervalro Gauge .1.3.6.1.4.1.18.3.4.12.3.1.4 |
wfDs1IntervalSEFsthe count of severely errored framing seconds in the specified
intervalro Gauge .1.3.6.1.4.1.18.3.4.12.3.1.5 |
wfDs1IntervalUASsthe number of unavailable seconds in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.12.3.1.6 |
wfDs1IntervalBPVsthe count of bipolar violations in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.12.3.1.7 |
wfDs1IntervalCVsthe count of code violation error events in the
specified intervalro Gauge .1.3.6.1.4.1.18.3.4.12.3.1.8 |
wfDs1TotalThe DS1 Total table SEQUENCE OF WfDs1TotalEntry .1.3.6.1.4.1.18.3.4.12.4 |
wfDs1TotalEntryper circuit DS1 total objects - wfDs1TotalIndex
corresponds to Wellfleet circuit number WfDs1TotalEntry .1.3.6.1.4.1.18.3.4.12.4.1 |
wfDs1TotalIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.12.4.1.1 |
wfDs1TotalESstotal count of errored secondsro Gauge .1.3.6.1.4.1.18.3.4.12.4.1.2 |
wfDs1TotalSESstotal count of severely errored secondsro Gauge .1.3.6.1.4.1.18.3.4.12.4.1.3 |
wfDs1TotalSEFstotal count of severely errored framing secondsro Gauge .1.3.6.1.4.1.18.3.4.12.4.1.4 |
wfDs1TotalUASstotal number of unavailable secondsro Gauge .1.3.6.1.4.1.18.3.4.12.4.1.5 |
wfDs1TotalBPVstotal count of bipolar violationsro Gauge .1.3.6.1.4.1.18.3.4.12.4.1.6 |
wfDs1TotalCVstotal count of code violation error eventsro Gauge .1.3.6.1.4.1.18.3.4.12.4.1.7 |
wfDs1FeCurrentThe DS1 Far End Current table SEQUENCE OF WfDs1FeCurrentEntry .1.3.6.1.4.1.18.3.4.12.5 |
wfDs1FeCurrentEntryper circuit DS1 far end current objects
wfDs1CurrentIndex corresponds to Wellfleet circuit
number WfDs1FeCurrentEntry .1.3.6.1.4.1.18.3.4.12.5.1 |
wfDs1FeCurrentIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.12.5.1.1 |
wfDs1FeCurrentESsthe count of errored seconds in the current intervalro Counter .1.3.6.1.4.1.18.3.4.12.5.1.2 |
wfDs1FeCurrentSESsthe count of severely errored seconds in the
current intervalro Counter .1.3.6.1.4.1.18.3.4.12.5.1.3 |
wfDs1FeCurrentSEFsthe count of severely errored framing seconds in the current
intervalro Counter .1.3.6.1.4.1.18.3.4.12.5.1.4 |
wfDs1FeCurrentBPVsthe count of bipolar violations in the current intervalro Counter .1.3.6.1.4.1.18.3.4.12.5.1.5 |
wfDs1FeCurrentCVsthe count of code violation error events in the
current intervalro Counter .1.3.6.1.4.1.18.3.4.12.5.1.6 |
wfDs1FeIntervalThe DS1 Far End Interval table SEQUENCE OF WfDs1FeIntervalEntry .1.3.6.1.4.1.18.3.4.12.6 |
wfDs1FeIntervalEntryper circuit DS1 far end interval objects -
wfDs1FeIntervalIndex corresponds to Wellfleet circuit
number, wfDs1FeIntervalNumber is the numbered
previous 15-minute interval WfDs1FeIntervalEntry .1.3.6.1.4.1.18.3.4.12.6.1 |
wfDs1FeIntervalIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.12.6.1.1 |
wfDs1FeIntervalNumber1..96 where 1 is the most recent 15-minute interval and 96 is
the leastro Enumeration .1.3.6.1.4.1.18.3.4.12.6.1.2 |
wfDs1FeIntervalESsthe count of errored seconds in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.12.6.1.3 |
wfDs1FeIntervalSESsthe count of severely errored seconds in the specified
intervalro Gauge .1.3.6.1.4.1.18.3.4.12.6.1.4 |
wfDs1FeIntervalSEFsthe count of severely errored framing seconds in the specified
intervalro Gauge .1.3.6.1.4.1.18.3.4.12.6.1.5 |
wfDs1FeIntervalBPVsthe count of bipolar violations in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.12.6.1.6 |
wfDs1FeIntervalCVsthe count of code violation error events in the
specified intervalro Gauge .1.3.6.1.4.1.18.3.4.12.6.1.7 |
wfDs1FeTotalThe DS1 Far End Total table SEQUENCE OF WfDs1FeTotalEntry .1.3.6.1.4.1.18.3.4.12.7 |
wfDs1FeTotalEntryper circuit DS1 far end total objects - wfDs1FeTotalIndex
corresponds to Wellfleet circuit number WfDs1FeTotalEntry .1.3.6.1.4.1.18.3.4.12.7.1 |
wfDs1FeTotalIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.12.7.1.1 |
wfDs1FeTotalESstotal count of errored secondsro Gauge .1.3.6.1.4.1.18.3.4.12.7.1.2 |
wfDs1FeTotalSESstotal count of severely errored secondsro Gauge .1.3.6.1.4.1.18.3.4.12.7.1.3 |
wfDs1FeTotalSEFstotal count of severely errored framing secondsro Gauge .1.3.6.1.4.1.18.3.4.12.7.1.4 |
wfDs1FeTotalBPVstotal count of bipolar violationsro Gauge .1.3.6.1.4.1.18.3.4.12.7.1.5 |
wfDs1FeTotalCVstotal count of code violation error eventsro Gauge .1.3.6.1.4.1.18.3.4.12.7.1.6 |
wfDs3Group OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.13 |
wfDs3ConfigThe DS3 Configuration table SEQUENCE OF WfDs3ConfigEntry .1.3.6.1.4.1.18.3.4.13.1 |
wfDs3ConfigEntryper circuit DS3 configuration objects; wfDs3LineIndex
corresponds to Wellfleet circuit number WfDs3ConfigEntry .1.3.6.1.4.1.18.3.4.13.1.1 |
wfDs3LineIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.13.1.1.1 |
wfDs3TimeElapsed1..900 seconds within the current 15-minute intervalro INTEGER .1.3.6.1.4.1.18.3.4.13.1.1.2 |
wfDs3ValidIntervals0..96 previous intervals that valid data
were collected. This is 96 unless the CSU
device was brought on line within the last 24
hours.ro INTEGER .1.3.6.1.4.1.18.3.4.13.1.1.3 |
wfDs3LineTypethe variety of DS3 implementing this circuitro Enumeration .1.3.6.1.4.1.18.3.4.13.1.1.4 |
wfDs3ZeroCodingthe variety of Zero Code Suppression used on the linkro Enumeration .1.3.6.1.4.1.18.3.4.13.1.1.5 |
wfDs3SendCodethe type of code being sent across the DS3 circuit by
the CSUro Enumeration .1.3.6.1.4.1.18.3.4.13.1.1.6 |
wfDs3CircuitIdentifierthe transmission vendor's circuit identifierro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.13.1.1.7 |
wfDs3LoopbackConfigthe loopback state of the CSUro Enumeration .1.3.6.1.4.1.18.3.4.13.1.1.8 |
wfDs3LineStatusthe state of the DS3 linero Enumeration .1.3.6.1.4.1.18.3.4.13.1.1.9 |
wfDs3CurrentThe DS3 Current table SEQUENCE OF WfDs3CurrentEntry .1.3.6.1.4.1.18.3.4.13.2 |
wfDs3CurrentEntryper circuit DS3 current objects - wfDs3CurrentIndex
corresponds to Wellfleet circuit number WfDs3CurrentEntry .1.3.6.1.4.1.18.3.4.13.2.1 |
wfDs3CurrentIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.13.2.1.1 |
wfDs3CurrentESsthe count of errored seconds in the current intervalro Counter .1.3.6.1.4.1.18.3.4.13.2.1.2 |
wfDs3CurrentSESsthe count of severely errored seconds in the
current intervalro Counter .1.3.6.1.4.1.18.3.4.13.2.1.3 |
wfDs3CurrentSEFsthe count of severely errored framing seconds in the current
intervalro Counter .1.3.6.1.4.1.18.3.4.13.2.1.4 |
wfDs3CurrentUASsthe number of unavailable seconds in the current intervalro Counter .1.3.6.1.4.1.18.3.4.13.2.1.5 |
wfDs3CurrentBPVsthe count of bipolar violations in the current intervalro Counter .1.3.6.1.4.1.18.3.4.13.2.1.6 |
wfDs3CurrentCVsthe count of code violation error events in the
current intervalro Counter .1.3.6.1.4.1.18.3.4.13.2.1.7 |
wfDs3IntervalThe DS3 Interval table SEQUENCE OF WfDs3IntervalEntry .1.3.6.1.4.1.18.3.4.13.3 |
wfDs3IntervalEntryper circuit DS3 interval objects - wfDs3IntervalIndex
corresponds to Wellfleet circuit number,
wfDs3IntervalNumber is the numbered previous
15-minute interval WfDs3IntervalEntry .1.3.6.1.4.1.18.3.4.13.3.1 |
wfDs3IntervalIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.13.3.1.1 |
wfDs3IntervalNumber1..96 where 1 is the most recent 15-minute interval and 96 is
the leastro Enumeration .1.3.6.1.4.1.18.3.4.13.3.1.2 |
wfDs3IntervalESsthe count of errored seconds in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.13.3.1.3 |
wfDs3IntervalSESsthe count of severely errored seconds in the specified
intervalro Gauge .1.3.6.1.4.1.18.3.4.13.3.1.4 |
wfDs3IntervalSEFsthe count of severely errored framing seconds in the specified
intervalro Gauge .1.3.6.1.4.1.18.3.4.13.3.1.5 |
wfDs3IntervalUASsthe number of unavailable seconds in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.13.3.1.6 |
wfDs3IntervalBPVsthe count of bipolar violations in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.13.3.1.7 |
wfDs3IntervalCVsthe count of code violation error events in the
specified intervalro Gauge .1.3.6.1.4.1.18.3.4.13.3.1.8 |
wfDs3TotalThe DS3 Total table SEQUENCE OF WfDs3TotalEntry .1.3.6.1.4.1.18.3.4.13.4 |
wfDs3TotalEntryper circuit DS3 total objects - wfDs3TotalIndex
corresponds to Wellfleet circuit number WfDs3TotalEntry .1.3.6.1.4.1.18.3.4.13.4.1 |
wfDs3TotalIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.13.4.1.1 |
wfDs3TotalESstotal count of errored secondsro Gauge .1.3.6.1.4.1.18.3.4.13.4.1.2 |
wfDs3TotalSESstotal count of severely errored secondsro Gauge .1.3.6.1.4.1.18.3.4.13.4.1.3 |
wfDs3TotalSEFstotal count of severely errored framing secondsro Gauge .1.3.6.1.4.1.18.3.4.13.4.1.4 |
wfDs3TotalUASstotal number of unavailable secondsro Gauge .1.3.6.1.4.1.18.3.4.13.4.1.5 |
wfDs3TotalBPVstotal count of bipolar violationsro Gauge .1.3.6.1.4.1.18.3.4.13.4.1.6 |
wfDs3TotalCVstotal count of code violation error eventsro Gauge .1.3.6.1.4.1.18.3.4.13.4.1.7 |
wfDs3FeConfigThe DS3 Far End Configuration table SEQUENCE OF WfDs3FeConfigEntry .1.3.6.1.4.1.18.3.4.13.5 |
wfDs3FeConfigEntryper circuit DS3 far end config objects -
wfDs3FeIntervalIndex corresponds to Wellfleet circuit
number WfDs3FeConfigEntry .1.3.6.1.4.1.18.3.4.13.5.1 |
wfDs3FeConfigIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.13.5.1.1 |
wfDs3FarEndEquipCodeequipment description code - C-bit parity onlyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.13.5.1.2 |
wfDs3FarEndLocationIDCodeequipment location code - C-bit parity onlyrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.13.5.1.3 |
wfDs3FarEndFrameIDCodecode for the equipment location within a buildingrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.13.5.1.4 |
wfDs3FarEndUnitCodecode for the equipment location within a bayrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.13.5.1.5 |
wfDs3FarEndFacilityIDCodepath identification coderw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.13.5.1.6 |
wfDs3FeCurrentThe DS3 Far End Current table SEQUENCE OF WfDs3FeCurrentEntry .1.3.6.1.4.1.18.3.4.13.6 |
wfDs3FeCurrentEntryper circuit DS3 far end current objects
wfDs3FeCurrentIndex corresponds to Wellfleet circuit
number WfDs3FeCurrentEntry .1.3.6.1.4.1.18.3.4.13.6.1 |
wfDs3FeCurrentIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.13.6.1.1 |
wfDs3FeCurrentESsthe count of errored seconds in the current intervalro Counter .1.3.6.1.4.1.18.3.4.13.6.1.2 |
wfDs3FeCurrentSESsthe count of severely errored seconds in the
current intervalro Counter .1.3.6.1.4.1.18.3.4.13.6.1.3 |
wfDs3FeCurrentCVsthe count of code violation error events in the
current intervalro Counter .1.3.6.1.4.1.18.3.4.13.6.1.4 |
wfDs3FeIntervalThe DS3 Far End Interval table SEQUENCE OF WfDs3FeIntervalEntry .1.3.6.1.4.1.18.3.4.13.7 |
wfDs3FeIntervalEntryper circuit DS3 far end interval objects -
wfDs3FeIntervalIndex corresponds to Wellfleet circuit
number, wfDs3FeIntervalNumber is the numbered previous
15-minute interval WfDs3FeIntervalEntry .1.3.6.1.4.1.18.3.4.13.7.1 |
wfDs3FeIntervalIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.13.7.1.1 |
wfDs3FeIntervalNumber1..96 where 1 is the most recent 15-minute interval and 96 is
the leastro Enumeration .1.3.6.1.4.1.18.3.4.13.7.1.2 |
wfDs3FeIntervalESsthe count of errored seconds in the specified intervalro Gauge .1.3.6.1.4.1.18.3.4.13.7.1.3 |
wfDs3FeIntervalSESsthe count of severely errored seconds in the
specified intervalro Gauge .1.3.6.1.4.1.18.3.4.13.7.1.4 |
wfDs3FeIntervalCVsthe count of code violation error events in the
specified intervalro Gauge .1.3.6.1.4.1.18.3.4.13.7.1.5 |
wfDs3FeTotalThe DS3 Far End Total table SEQUENCE OF WfDs3FeTotalEntry .1.3.6.1.4.1.18.3.4.13.8 |
wfDs3FeTotalEntryper circuit far end DS3 total objects - wfDs3FeTotalIndex
corresponds to Wellfleet circuit number WfDs3FeTotalEntry .1.3.6.1.4.1.18.3.4.13.8.1 |
wfDs3FeTotalIndexthis corresponds to the Wellfleet circuit numberro Enumeration .1.3.6.1.4.1.18.3.4.13.8.1.1 |
wfDs3FeTotalESstotal count of errored secondsro Gauge .1.3.6.1.4.1.18.3.4.13.8.1.2 |
wfDs3FeTotalSESstotal count of severely errored secondsro Gauge .1.3.6.1.4.1.18.3.4.13.8.1.3 |
wfDs3FeTotalCVstotal count of code violation error eventsro Gauge .1.3.6.1.4.1.18.3.4.13.8.1.4 |
wfSipGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.14 |
wfSipPlcpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.14.2 |
wfFddiGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15 |
wfFddiSmtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.1 |
wfFddiSmtTableA list of SMT entries. SEQUENCE OF WfFddiSmtEntry .1.3.6.1.4.1.18.3.4.15.1.2 |
wfFddiSmtEntryAn SMT entry containing information common to a given SMT. WfFddiSmtEntry .1.3.6.1.4.1.18.3.4.15.1.2.1 |
wfFddiSmtSlotSlot number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.1 |
wfFddiSmtNodeNode/connector number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.2 |
wfFddiSmtCctCircuit number associated with an SMT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.3 |
wfFddiSmtStationIdUnique identifier of an FDDI station.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.1.2.1.4 |
wfFddiSmtOpVersionIdThe version that this station is using for its
operation.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.5 |
wfFddiSmtMacCtThe number of MACs in the station or
concentrator.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.6 |
wfFddiSmtNonMasterCtThe number of Non Master PORTs (A, B, or S PORTs)
in the station or concentrator.ro INTEGER .1.3.6.1.4.1.18.3.4.15.1.2.1.7 |
wfFddiSmtEcmStateIndicates the current state of the ECM state
machine.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.2.1.8 |
wfFddiSmtCfStateThe attachment configuration for the station or
concentrator.ro Enumeration .1.3.6.1.4.1.18.3.4.15.1.2.1.9 |
wfFddiMacGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.2 |
wfFddiMacTableA list of MAC entries. SEQUENCE OF WfFddiMacEntry .1.3.6.1.4.1.18.3.4.15.2.2 |
wfFddiMacEntryA MAC entry containing information common to a given MAC. WfFddiMacEntry .1.3.6.1.4.1.18.3.4.15.2.2.1 |
wfFddiMacSlotSlot number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.2.1.1 |
wfFddiMacNodeNode/connector number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.2.1.2 |
wfFddiMacCctCircuit number associated with a MAC entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.2.1.3 |
wfFddiMacUpstreamNbrThe MAC's upstream neighbor's long individual MAC
address. It may be determined by the Neighbor
Information Frame protocol. The value shall be
reported as '00 00 00 00 00 00' if it is unknown.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.4 |
wfFddiMacDownstreamNbrThe MAC's downstream neighbor's long individual MAC
address. It may be determined by the Neighbor
Information Frame protocol. The value shall be
reported as '00 00 00 00 00 00' if it is unknown.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.5 |
wfFddiMacSmtAddressThe 48 bit individual address of the MAC used for
SMT frames.ro OCTET STRING .1.3.6.1.4.1.18.3.4.15.2.2.1.6 |
wfFddiMacTNegThe negotiated TTRT during the claim process
represented in unsigned integer specifying
time in octet units (80 nanosecond).ro INTEGER .1.3.6.1.4.1.18.3.4.15.2.2.1.7 |
wfFddiMacRmtStateIndicates the current state of the Ring
Management state machine.ro Enumeration .1.3.6.1.4.1.18.3.4.15.2.2.1.8 |
wfFddiPathGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.3 |
wfFddiPortGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.15.4 |
wfFddiPortTableA list of PORT entries. The number of entries is given by the value of
wfFddiPortNumber. SEQUENCE OF WfFddiPortEntry .1.3.6.1.4.1.18.3.4.15.4.2 |
wfFddiPortEntryA PORT entry containing information common to a given PORT. WfFddiPortEntry .1.3.6.1.4.1.18.3.4.15.4.2.1 |
wfFddiPortSlotSlot number associated with a PORT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.4.2.1.1 |
wfFddiPortNodeNode/connector number associated with a PORT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.4.2.1.2 |
wfFddiPortCctCircuit number associated with a PORT entity.ro INTEGER .1.3.6.1.4.1.18.3.4.15.4.2.1.3 |
wfFddiPortIndexA unique value for each PORT associated with each
slot/connector pair.ro INTEGER .1.3.6.1.4.1.18.3.4.15.4.2.1.4 |
wfFddiPortPcTypePC_Type.ro Enumeration .1.3.6.1.4.1.18.3.4.15.4.2.1.5 |
wfFddiPortPcNeighborThe type (PC_Neighbor) of the remote PORT that is
determined in PC_Signaling in R_Val (1,2).ro Enumeration .1.3.6.1.4.1.18.3.4.15.4.2.1.6 |
wfFddiPortPcmStateState of Physical State Machine.ro Enumeration .1.3.6.1.4.1.18.3.4.15.4.2.1.7 |
wfApplication OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5 |
wfDataLink OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1 |
wfBridgeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.1 |
wfBrLearning OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.1.1 |
wfBrTp OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.1.1.1 |
wfBrTpBaseDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the bridge.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.1 |
wfBrTpBaseEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable the bridge.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.2 |
wfBrTpBaseStateThe current state of the entire Bridge.ro Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.1.3 |
wfBrTpFdbTableA table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame.
inst = wfBrTpBaseFdbAddress SEQUENCE OF WfBrTpFdbEntry .1.3.6.1.4.1.18.3.5.1.1.1.2 |
wfBrTpFdbEntryAn entry in the wfBrTpFdbTable. WfBrTpFdbEntry .1.3.6.1.4.1.18.3.5.1.1.1.2.1 |
wfBrTpBaseFdbAddressA unicast MAC address for which the bridge has
forwarding and/or filtering information.ro OCTET STRING .1.3.6.1.4.1.18.3.5.1.1.1.2.1.1 |
wfBrTpBaseFdbPortThe port number on which the wfBrTpBaseFdbAddress
was learned.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.1.2.1.2 |
wfBrTpBaseFdbStatusThe status of this entry. The meanings of the
values are:
learned(3) : the value of the corresponding
instance of wfBrTpFdbPort was
learned, and is being used.ro Enumeration .1.3.6.1.4.1.18.3.5.1.1.1.2.1.3 |
wfBrSourceRouting OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.1.2 |
wfBrTpInterfaceA table that contains information about every
interface that is associated with this
transparent bridge.
inst_id[1] = wfBrTpInterfaceCircuit SEQUENCE OF WfBrTpInterfaceEntry .1.3.6.1.4.1.18.3.5.1.1.3 |
wfBrTpInterfaceEntryAn entry in wfBrTpInterface. WfBrTpInterfaceEntry .1.3.6.1.4.1.18.3.5.1.1.3.1 |
wfBrTpInterfaceDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete an interface.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.3.1.1 |
wfBrTpInterfaceEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an interface.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.3.1.2 |
wfBrTpInterfaceStateThe current state of the interface.ro Enumeration .1.3.6.1.4.1.18.3.5.1.1.3.1.3 |
wfBrTpInterfaceCircuitThe circuit that this interface runs over.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.3.1.4 |
wfBrTpInterfaceMaxInfoThe maximum size of the INFO (non-MAC) field that
this port will receive or transmit.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.3.1.5 |
wfBrTpInterfaceInFramesThe number of frames that have been received by
this interface from its circuit.ro Counter .1.3.6.1.4.1.18.3.5.1.1.3.1.6 |
wfBrTpInterfaceOutFramesThe number of frames that have been transmitted
by this interface to its circuit.ro Counter .1.3.6.1.4.1.18.3.5.1.1.3.1.7 |
wfBrTpInterfaceInDiscardsCount of valid frames received which were
received on this interface but then discarded.ro Counter .1.3.6.1.4.1.18.3.5.1.1.3.1.8 |
wfBrTrafficFilterTableBridge Traffic Filters SEQUENCE OF WfBrTrafficFilterEntry .1.3.6.1.4.1.18.3.5.1.1.4 |
wfBrTrafficFilterEntryAn entry in WfBrTrafficFilterTable. WfBrTrafficFilterEntry .1.3.6.1.4.1.18.3.5.1.1.4.1 |
wfBrTrafficFilterCreateDefines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.4.1.1 |
wfBrTrafficFilterEnableDefines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.1.1.4.1.2 |
wfBrTrafficFilterStatusDefines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.1.1.4.1.3 |
wfBrTrafficFilterCounterThe number of received packets that have
matched this rule.ro Counter .1.3.6.1.4.1.18.3.5.1.1.4.1.4 |
wfBrTrafficFilterDefinitionThe filter rule definition.rw Opaque .1.3.6.1.4.1.18.3.5.1.1.4.1.5 |
wfBrTrafficFilterReservedReserved field. INTEGER .1.3.6.1.4.1.18.3.5.1.1.4.1.6 |
wfBrTrafficFilterCircuitThe ID of the Bridge Circuit to which the
filter is applied.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.4.1.7 |
wfBrTrafficFilterRuleNumberID for the rule.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.4.1.8 |
wfBrTrafficFilterFragmentFragment number - for large rules.ro INTEGER .1.3.6.1.4.1.18.3.5.1.1.4.1.9 |
wfSpanningTree OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.2 |
wfIfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.3 |
wfCircuitOptsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.4 |
wfCctOptsTableThe table of circuit names SEQUENCE OF WfCctOptsEntry .1.3.6.1.4.1.18.3.5.1.4.1 |
wfCctOptsEntryEntry format for the table of circuit options WfCctOptsEntry .1.3.6.1.4.1.18.3.5.1.4.1.1 |
wfCctOptsDeleteCreation and deletion flag for this recordrw Enumeration .1.3.6.1.4.1.18.3.5.1.4.1.1.1 |
wfCctOptsPriorityQueueingDisablePriority Queuing optionrw Enumeration .1.3.6.1.4.1.18.3.5.1.4.1.1.2 |
wfCctOptsCctcircuit numberro INTEGER .1.3.6.1.4.1.18.3.5.1.4.1.1.3 |
wfCctOptsHighPriorityQueueLimitHigh Priority Queue limit
The minimum valid value is zero.
The maximum valid value is 63 (HW xmit ring size)
minus the sum of the Normal and Low queue limits.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.1.1.4 |
wfCctOptsNormalPriorityQueueLimitNormal Priority Queue limit
The minimum valid value is zero.
The maximum valid value is 63 (HW xmit ring size)
minus the sum of the High and Low queue limits.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.1.1.5 |
wfCctOptsLowPriorityQueueLimitLow Priority Queue limit
The minimum valid value is zero.
The maximum valid value is 63 (HW xmit ring size)
minus the sum of the High and Normal queue limits.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.1.1.6 |
wfCctOptsMaxInterruptQueueLatencyInterrupt Queue Latencyrw Enumeration .1.3.6.1.4.1.18.3.5.1.4.1.1.7 |
wfCctOptsMaxHighPriorityQueueLatencyHigh Priority Queue Latencyrw Enumeration .1.3.6.1.4.1.18.3.5.1.4.1.1.8 |
wfCctOptsHiXmitsHigh Priority Transmit countro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.9 |
wfCctOptsNormalXmitsNormal Priority Transmit countro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.10 |
wfCctOptsLoXmitsLow Priority Transmit countro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.11 |
wfCctOptsHiClippedPktsHigh Prio Transmit Clip Countro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.12 |
wfCctOptsNormalClippedPktsNormal Prio Transmit Clip Countro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.13 |
wfCctOptsLoClippedPktsLow Prio Transmit Clip Countro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.14 |
wfCctOptsIntrQHighWaterPktsInterrupt Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.1.4.1.1.15 |
wfCctOptsHiQHighWaterPktsHigh-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.1.4.1.1.16 |
wfCctOptsNormalQHighWaterPktsNormal Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.1.4.1.1.17 |
wfCctOptsLoQHighWaterPktsLow-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.1.4.1.1.18 |
wfCctOptsHighWaterPktsClearAttribute to clear the high-water marks. When the MIB
changes, Priority Queueing (if ENABLED) checks to see
if HighWaterPktsClear is different than the last time the MIB
was modified in any way. If it is different,
all the high water marks (see above) are set to zero.rw INTEGER .1.3.6.1.4.1.18.3.5.1.4.1.1.19 |
wfCctOptsDroppedPktsPackets which were filtered in Priority Queueingro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.20 |
wfCctOptsLargePktsLarge Packets which became an exception to latency rulesro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.21 |
wfCctOptsRxPktsPackets receivedro Counter .1.3.6.1.4.1.18.3.5.1.4.1.1.22 |
wfCctOptsBrFilterTableBridge Filters SEQUENCE OF WfCctOptsBrFilterEntry .1.3.6.1.4.1.18.3.5.1.4.2 |
wfCctOptsBrFilterEntryAn entry in WfCctOptsBrFilterTable. WfCctOptsBrFilterEntry .1.3.6.1.4.1.18.3.5.1.4.2.1 |
wfCctOptsBrFilterCreateDefines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.2.1.1 |
wfCctOptsBrFilterEnableDefines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.2.1.2 |
wfCctOptsBrFilterStateDefines the current State of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.1.4.2.1.3 |
wfCctOptsBrFilterCounterThe number of received packets that have
matched this rule.ro Counter .1.3.6.1.4.1.18.3.5.1.4.2.1.4 |
wfCctOptsBrFilterDefinitionThe filter rule definition.rw OCTET STRING .1.3.6.1.4.1.18.3.5.1.4.2.1.5 |
wfCctOptsBrFilterReservedReserved field. INTEGER .1.3.6.1.4.1.18.3.5.1.4.2.1.6 |
wfCctOptsBrFilterCctThe ID of the CctBridge Cct to which the
filter is applied.ro INTEGER .1.3.6.1.4.1.18.3.5.1.4.2.1.7 |
wfCctOptsBrFilterRuleNumberID for the rule.ro INTEGER .1.3.6.1.4.1.18.3.5.1.4.2.1.8 |
wfCctOptsBrFilterFragmentFragment number - for large rules.ro INTEGER .1.3.6.1.4.1.18.3.5.1.4.2.1.9 |
wfCctOptsIpFilterTableIp Filters SEQUENCE OF WfCctOptsIpFilterEntry .1.3.6.1.4.1.18.3.5.1.4.3 |
wfCctOptsIpFilterEntryAn entry in WfCctOptsIpFilterTable. WfCctOptsIpFilterEntry .1.3.6.1.4.1.18.3.5.1.4.3.1 |
wfCctOptsIpFilterCreateDefines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.3.1.1 |
wfCctOptsIpFilterEnableDefines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.3.1.2 |
wfCctOptsIpFilterStateDefines the current State of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.1.4.3.1.3 |
wfCctOptsIpFilterCounterThe number of received packets that have
matched this rule.ro Counter .1.3.6.1.4.1.18.3.5.1.4.3.1.4 |
wfCctOptsIpFilterDefinitionThe filter rule definition.rw OCTET STRING .1.3.6.1.4.1.18.3.5.1.4.3.1.5 |
wfCctOptsIpFilterReservedReserved field. INTEGER .1.3.6.1.4.1.18.3.5.1.4.3.1.6 |
wfCctOptsIpFilterCctThe ID of the CctIp Cct to which the
filter is applied.ro INTEGER .1.3.6.1.4.1.18.3.5.1.4.3.1.7 |
wfCctOptsIpFilterRuleNumberID for the rule.ro INTEGER .1.3.6.1.4.1.18.3.5.1.4.3.1.8 |
wfCctOptsIpFilterFragmentFragment number - for large rules.ro INTEGER .1.3.6.1.4.1.18.3.5.1.4.3.1.9 |
wfCctOptsLengthBasedTableLength Based Priority Table SEQUENCE OF WfCctOptsLengthBasedEntry .1.3.6.1.4.1.18.3.5.1.4.4 |
wfCctOptsLengthBasedEntryAn entry in WfCctOptsLengthBasedTable. WfCctOptsLengthBasedEntry .1.3.6.1.4.1.18.3.5.1.4.4.1 |
wfCctOptsLengthBasedDeleteDefines the existence of the length based priority filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.4.1.1 |
wfCctOptsLengthBasedDisableDefines whether or not the length based priority filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.1.4.4.1.2 |
wfCctOptsLengthBasedStateDefines the current State of the length based priority filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.1.4.4.1.3 |
wfCctOptsLengthBasedCctThe ID of the Cct to which the filter is appliedro INTEGER .1.3.6.1.4.1.18.3.5.1.4.4.1.4 |
wfCctOptsLengthBasedMuxpacket mux typero Enumeration .1.3.6.1.4.1.18.3.5.1.4.4.1.5 |
wfCctOptsLengthBasedDataa five byte quantity of the form
ethernet - 0x6003000000 (e.g. DECnet)
lsap - 0xfefe030000 (e.g. OSI)
snap - 0x0000000800 (e.g. IP)
- 0x0800070800 (e.g. Appletalk DDP)ro OCTET STRING .1.3.6.1.4.1.18.3.5.1.4.4.1.6 |
wfCctOptsLengthBasedLengthMaximum length of a packet to be considered high priorityrw INTEGER .1.3.6.1.4.1.18.3.5.1.4.4.1.7 |
wfCctOptsLengthBasedLessThanQqueue into which packets of length less than or equal
wfCctOptsLengthBasedLength are placedrw Enumeration .1.3.6.1.4.1.18.3.5.1.4.4.1.8 |
wfCctOptsLengthBasedGreaterThanQqueue into which packets of length greater than
wfCctOptsLengthBasedLength are placedrw Enumeration .1.3.6.1.4.1.18.3.5.1.4.4.1.9 |
wfDecGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.2 |
wfivRouteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.2.1 |
wfivRouteCreateDelete'This value determines whether DECnet is configured on this slot.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.1 |
wfivRouteEnableDisable'This value determines whether DECnet is to startup.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.2 |
wfivRouteState'This value determines whether DECnet is to startup.'ro Enumeration .1.3.6.1.4.1.18.3.5.2.1.3 |
wfivRouteBroadcastRouteTimer'This value determines the maximum time allowed between
Routing updates on Ethernet circuits. When this timer expires
before a routing update occurs, a routing update is forced.
With a standard calculation, Routing also uses this timer to
enforce a minimum delay between routing updates. Seconds is a
decimal integer in the range 1-65535.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.4 |
wfivRouteRoutingVers'This read-only parameter identifies the executor node's
Routing version number. The format is the same as for the
Network Management version number.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.2.1.5 |
wfivRouteMaxAddr'This value represents the largest node number and,
therefore, number of nodes that can be known about
by the executor node's home area. The number is an integer
in the range 1-1023.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.6 |
wfivRouteMaxBdcastNonRouters'This value represents the maximum total number of nonrouters
the executor node can have on its broadcast circuits for one slot.
The number is an integer in the range 0-1023.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.7 |
wfivRouteMaxBdcastRouters'This value represents the maximum total number of routers the
executor node can have on its broadcast circuits for one slot.
The number is an integer in the range 0-1023.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.8 |
wfivRouteMaxCircuits'This value represents the maximum number of Routing circuits
that the executor node can know about. The number is decimal
in the range 1-65535. Wellfleet limits this to 1024'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.9 |
wfivRouteMaxCost'This value represents the maximum total path cost allowed
from the executor to any node within an area. The path cost is
the sum of the circuit costs along a path between two nodes.
This parameter defines the point where the executor node's
Routing decision algorithm declares another node
unreachable because the cost of the least costly path to the
other node is excessive. For correct operation, this parameter
must not be less than the maximum path cost of the network.
The MAXIMUM COST number is decimal in the range
1-1022.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.10 |
wfivRouteMaxHops'This value represents the maximum number of routing hops
allowable from the executor to any other reachable node within
an area. (A hop is the logical distance over a circuit between
two adjacent nodes.) This parameter defines the point where
the executor node's Routing decision algorithm
declares another node unreachable because the length of the
shortest path between the two nodes is too long. For correct
operation, this parameter must not be less than the network
diameter. (The network diameter is the reachability distance
between the two nodes of the network having the greatest
reachability distance, where reachability distance is the
length the shortest path between a given pair of nodes.) The
MAXIMUM HOPS number is decimal in the range 1-30.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.11 |
wfivRouteMaxVisits'This value represents the maximum number of nodes a message
coming into the executor node can have visited. If the message
is not for this node and the MAXIMUM VISITS number is exceeded,
the message is discarded. The MAXIMUM VISITS parameter defines
the point where the packet lifetime control algorithm discards
a packet that has traversed too many nodes. For correct
operation, this parameter must not be less than the maximum
path length of the network. (The maximum path length is the
routing distance between the two nodes of the network having
the greatest routing distance, where routing distance is the
length of the least costly path between a given pair of nodes.)
The MAXIMUM VISITS number is decimal in the range MAXIMUM HOPS
to 63.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.12 |
wfivRouteAreaMaxCost'This value represents the maximum total path cost allowed
from the executor to any other level 2 routing node. The AREA
MAXIMUM COST number is decimal in the range
1-1022. This parameter is only applicable if the executor
node is of type AREA.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.13 |
wfivRouteAreaMaxHops'This value represents the maximum number of routing hops
allowable from the executor to any other level 2 routing node.
The AREA MAXIMUM HOPS number is decimal in the range
1-30.This parameter is only applicable if the executor node
is of type AREA.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.14 |
wfivRouteMaxArea'This value represents the largest area number and, therefore,
number of areas that can be known about by the executor node's
Routing. This parameter is only applicable if the executor
node is of type AREA. The number is an integer in the range
1-63.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.1.15 |
wfivRouteType'This parameter indicates the type of the executor node. The
node-type is one of the following:
ROUTING III
NONROUTING III
ROUTING IV
NONROUTING IV
AREA
A routing node has full routing capability. A nonrouting node
contains a subset of the Routing modules. The III and
IV indicate the DNA phase of the node. Nonrouting nodes can
deliver and receive packets to and from any node, but cannot
route packets from other nodes through to other nodes. An
area node routes between areas. Refer to the Routing
specification for details.
For adjacent nodes, this is a read-only parameter that
indicates the type of the reachable adjacent node.
NOTE: The ROUTING III and NONROUTING III values are
incremented by one compared to the standard DECnet values in
order to maintain compliance with RFC 1155)'ro Enumeration .1.3.6.1.4.1.18.3.5.2.1.16 |
wfivCircuitTable' Table of DECnet Circuit Configuration and Counter Records' SEQUENCE OF WfivCircuitEntry .1.3.6.1.4.1.18.3.5.2.2 |
wfivCircuitEntry'Parameters information about all circuits currently known.
NOTE: depending on the type of object being querried (e.g., a
level 1 vs. a level 2 router or end system) some variables may
not be present.' WfivCircuitEntry .1.3.6.1.4.1.18.3.5.2.2.1 |
wfivCircuitCreateDelete'This value determines whether the circuit is configured'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.1 |
wfivCircuitEnableDisable'This value represents the circuit's Network Management
operational state. NOTE: These values are incremented by one
compared to the standard DECnet values in order to maintain
compliance with RFC 1155.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.2 |
wfivCircuitCommonState'This value represents the circuit's operational state.'ro Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.3 |
wfivCircuitArea'DECnet Phase IV area number for this circuit.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.4 |
wfivCircuitNodeid'DECnet Phase IV node address for this circuit.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.5 |
wfivCircuitNodeAddr'The address of the adjacent node.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.2.2.1.6 |
wfivCircuitID'A unique value for each known circuit.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.2.1.7 |
wfivCircuitCommonType'Represents the type of the circuit. For X.25 circuits, the
value must be set to X25. For DDCMP and Ethernet circuits it
is read only and is the same value as the protocol of
the associated line.
NOTE: Values 1 - 5 are incremented by one compared to the
standard DECnet values in order to maintain compliance with
RFC 1155.'ro Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.8 |
wfivCircuitExecCost'This value represents the Routing cost of the circuit.
Routing routes messages along the path between two nodes having
the smallest cost. The cost is a decimal integer in the range
1-63.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.9 |
wfivCircuitExecHelloTimer'This value determines the frequency of Routing Hello (T3) messages
sent to the adjacent node on the circuit. Seconds is a decimal
integer in the range 1-8191.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.10 |
wfivCircuitDesigRouterNodeAddr'This value is the address of the designated router.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.2.2.1.11 |
wfivCircuitMaxRouters'NR -This parameter is the maximum number of routers (including
the executor itself) allowed on the circuit by Routing for
circuits that are owned by the executor node. Number is a
decimal integer in the range 1-33.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.12 |
wfivCircuitRouterPri'This parameter is the priority that this router is to have in
the selection of designated router for the circuit on circuits
that are owned by the executor node. Number is a decimal
integer in the range 0-127. The default value is 64.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.13 |
wfivCircuitCountAgedPktLoss'Aged packet loss.'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.14 |
wfivCircuitCountNodeUnrPktLoss'Node unreachable packet loss.'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.15 |
wfivCircuitCountOutRngePktLoss'Node out-of-range packet loss.'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.16 |
wfivCircuitCountOverSzePktLoss'Oversized packet loss.'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.17 |
wfivCircuitCountPacketFmtErr'Packet format errors.'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.18 |
wfivCircuitCountPtlRteUpdtLoss'Partial routing update loss.'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.19 |
wfivCircuitCountTransitPksRecd'Transit packets Received. This value is stored internally as
a 32 bit value.'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.20 |
wfivCircuitCountTransitPkSent'Transit packets sent. This value is stored internally as
a 32 bit value.'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.21 |
wfivCircuitCountRtHelloSent' Router Hellos Sent'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.22 |
wfivCircuitCountRtHelloRcvd' Router Hellos Received'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.23 |
wfivCircuitCountHelloSent' Endnode Hellos Sent'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.24 |
wfivCircuitCountHelloRcvd' Endnode Hellos Received'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.25 |
wfivCircuitCountL1UpdSent' Level 1 Routing Updates Sent'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.26 |
wfivCircuitCountL1UpdRcvd' Level 1 Routing Updates Received'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.27 |
wfivCircuitCountAreaUpdSent' Area Routing Updates Sent'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.28 |
wfivCircuitCountAreaUpdRcvd' Area Routing Updates Received'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.29 |
wfivCircuitCountDropped' Dropped Packets 'ro Counter .1.3.6.1.4.1.18.3.5.2.2.1.30 |
wfivCircuitAllEndnodesMac'This parameter can be used to assign the AllEndnodes multicast
MAC address value for use over WAN media (e.g. Frame Relay).'rw OCTET STRING .1.3.6.1.4.1.18.3.5.2.2.1.31 |
wfivCircuitAllRoutersMac'This parameter can be used to assign the AllRouters multicast
MAC address value for use over WAN media (e.g. Frame Relay).'rw OCTET STRING .1.3.6.1.4.1.18.3.5.2.2.1.32 |
wfivCircuitAllAreaRoutersMac'This parameter can be used to assign the AllAreaRouters multicast
MAC address value for use over WAN media (e.g. Frame Relay).'rw OCTET STRING .1.3.6.1.4.1.18.3.5.2.2.1.33 |
wfivCircuitHelloEnableDisable' This parameter is used to disable to sending of Hellos
to Endnodes. It would be used in conjunction with Static
Adjacencies to limit the amount of data passed over a WAN
link (e.g. Frame Relay).'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.34 |
wfivCircuitRtHelloEnableDisable' This parameter is used to disable to sending of Hellos
to Routers. It would be used in conjunction with Static
Adjacencies to limit the amount of data passed over a WAN
link (e.g. Frame Relay).'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.35 |
wfivCircuitL1UpdateEnableDisable' This parameter is used to disable to sending of Level 1
topology updates. It would be used in conjunction with Static
Adjacencies to limit the amount of data passed over a WAN
link (e.g. Frame Relay).'rw Enumeration .1.3.6.1.4.1.18.3.5.2.2.1.36 |
wfivLevel1RouteTable' Table of Level 1 Routing Table Entries' SEQUENCE OF WfivLevel1RouteEntry .1.3.6.1.4.1.18.3.5.2.3 |
wfivLevel1RouteEntry'A Record in the Level 1 Routing Table' WfivLevel1RouteEntry .1.3.6.1.4.1.18.3.5.2.3.1 |
wfivLevel1AreaId'Area Id for this node'ro INTEGER .1.3.6.1.4.1.18.3.5.2.3.1.1 |
wfivLevel1NodeId'Area Id for this node'ro INTEGER .1.3.6.1.4.1.18.3.5.2.3.1.2 |
wfivLevel1RouteNodeAddr'This value is the address of the node about which routing
information is contained in this level 1 routing table.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.2.3.1.3 |
wfivLevel1RouteCircuitID'This READ_ONLY parameter identifies the circuit used to get
to a remote node. Circuit-id is an id-string. This parameter
can be used when displaying a list of nodes to indicate that
the display is to be restricted to those nodes adjacent on the
specified circuit.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.3.1.4 |
wfivLevel1RouteCost'This READ_ONLY parameter represents the total cost over the
current path to the destination node. Cost is a positive
integer value associated with using a circuit. Routing routes
messages (data) along the path between two nodes with the
smallest cost. COST is kept on a remote node basis.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.3.1.5 |
wfivLevel1RouteHops'This READ_ONLY parameter represents the number of hops over
to a destination node. A hop is Routing value representing
the logical distance between two nodes in a network. HOPS is
kept on a remote node basis.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.3.1.6 |
wfivLevel1RouteNextNode'This READ_ONLY value indicates the next node on the circuit
used to get to the node under scrutiny (next hop).'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.2.3.1.7 |
wfivAreaTable'Table of Area Routing Table Entries' SEQUENCE OF WfivAreaEntry .1.3.6.1.4.1.18.3.5.2.4 |
wfivAreaEntry'The area routing information.' WfivAreaEntry .1.3.6.1.4.1.18.3.5.2.4.1 |
wfivAreaNum'This value indicates the area number of this entry.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.4.1.1 |
wfivAreaState'This value indicates the state of the area'ro Enumeration .1.3.6.1.4.1.18.3.5.2.4.1.2 |
wfivAreaCost'The total cost over the current path to the
destination area. Cost is a value associated with
using a circuit. Routing routes messages (data)
along the path between 2 areas with the smallest
cost.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.4.1.3 |
wfivAreaHops'The number of hops to a destination area. A hop is
the routing value representing the logical distance
between two areas in network.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.4.1.4 |
wfivAreaCircuitID'The circuit used to get to the remote area'ro INTEGER .1.3.6.1.4.1.18.3.5.2.4.1.5 |
wfivAreaNextNode'The next node on the circuit used to get to the
area under scrutiny.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.2.4.1.6 |
wfivAdjTableAdjacency Table SEQUENCE OF WfivAdjEntry .1.3.6.1.4.1.18.3.5.2.5 |
wfivAdjEntry' Adjacency Table - the real index is the adjacency index' WfivAdjEntry .1.3.6.1.4.1.18.3.5.2.5.1 |
wfivAdjIndex'Index in the Adjacency Table'ro INTEGER .1.3.6.1.4.1.18.3.5.2.5.1.1 |
wfivAdjNodeAddr'The address of the adjacent node.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.2.5.1.2 |
wfivAdjBlockSize'This READ_ONLY parameter is the block size that was
negotiated with the adjacent Routing layer during Routing
initialization over a particular circuit. It includes the
routing header, but excludes the data link header. This
parameter is qualified by ADJACENT NODE.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.5.1.3 |
wfivAdjListenTimer'This READ_ONLY value determines the maximum time allowed to
elapse before Routing receives some message (either a Hello
message or a user message) from the adjacent node on the
circuit. It was agreed during Routing initialization with the
adjacent Routing layer. Seconds is a decimal integer in the
range 1-65535. This parameter is qualified by ADJACENT NODE.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.5.1.4 |
wfivAdjCircuitID'A unique value for each known circuit.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.5.1.5 |
wfivAdjType'This parameter indicates the type of adjacency.
For adjacent nodes, this is a READ_ONLY parameter that
indicates the type of the reachable adjacent node.
NOTE: The ROUTING III and NONROUTING III values are
incremented by one compared to the standard DECnet values in
order to maintain compliance with RFC 1155)
ROUTING III (1),
NONROUTING III (2),
AREA (3),
ROUTING IV (4),
NONROUTING IV (5)'ro INTEGER .1.3.6.1.4.1.18.3.5.2.5.1.6 |
wfivAdjState'This value indicates the state of a router adjacency.
On adjacencies over a circuit of type (wfivCircuitCommonType)
Ethernet, CI, or FDDI, with an adjacent node of type
(wfivAdjType) ROUTING IV or AREA, this variable is the state
of the Ethernet Initialization Layer for this adjacency, and
can have values INITIALIZING or UP. (See Section 9.1.1 of
DECnet Phase IV Routing Layer Functional Specification.)
On adjacencies over a circuit of type (wfivCircuitCommonType)
Ethernet, CI, or FDDI, with an adjacent node of type
(wfivAdjType) NONROUTING IV, this varaible will always take on
the value UP.
On adjacencies over a circuit of type (wfivCircuitCommonType)
DDCMP POINT, DDCMP CONTROL, DDCMP TRIBUTARY, DDCMP DMC, or
X.25, this variable is the state of the Routing Layer
Initialization Circuit State. (See section 7.3, ibid.) It can
have values between RUN and HALT.
On adjacencies over a circuit of type (wfivCircuitCommonType)
OTHER, this variable may be used in a manner consistent with
the Initialization Layer used on that circuit.
INITIALIZING (1),
UP (2),
RUN (3),
CIRCUIT REJECTED (4),
DATA LINK START (5),
ROUTING LAYER INITIALIZE (6),
ROUTING LAYER VERIFY (7),
ROUTING LAYER COMPLETE (8),
OFF (9),
HALT (10)'ro Enumeration .1.3.6.1.4.1.18.3.5.2.5.1.7 |
wfivAdjPriority'Priority assigned by the adjacent node for this circuit.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.5.1.8 |
wfivAdjClass'Specifies whether this adjacency is Static or Dynamic'ro INTEGER .1.3.6.1.4.1.18.3.5.2.5.1.9 |
wfivTrafficFilterTableDECNET Traffic Filters SEQUENCE OF WfivTrafficFilterEntry .1.3.6.1.4.1.18.3.5.2.6 |
wfivTrafficFilterEntryAn entry in WfivTrafficFilterTable. WfivTrafficFilterEntry .1.3.6.1.4.1.18.3.5.2.6.1 |
wfivTrafficFilterCreateDefines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.2.6.1.1 |
wfivTrafficFilterEnableDefines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.2.6.1.2 |
wfivTrafficFilterStatusDefines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.2.6.1.3 |
wfivTrafficFilterCounterThe number of received packets that have
matched this rule.ro Counter .1.3.6.1.4.1.18.3.5.2.6.1.4 |
wfivTrafficFilterDefinitionThe filter rule definition.rw Opaque .1.3.6.1.4.1.18.3.5.2.6.1.5 |
wfivTrafficFilterReservedReserved field. INTEGER .1.3.6.1.4.1.18.3.5.2.6.1.6 |
wfivTrafficFilterCircuitThe ID of the Circuit to which the
filter is applied.ro INTEGER .1.3.6.1.4.1.18.3.5.2.6.1.7 |
wfivTrafficFilterRuleNumberID for the rule.ro INTEGER .1.3.6.1.4.1.18.3.5.2.6.1.8 |
wfivTrafficFilterFragmentFragment number - for large rules.ro INTEGER .1.3.6.1.4.1.18.3.5.2.6.1.9 |
wfivStaticAdjTableStatic Adjacency Table SEQUENCE OF WfivStaticAdjEntry .1.3.6.1.4.1.18.3.5.2.7 |
wfivStaticAdjEntry' Static Adjacency Table ' WfivStaticAdjEntry .1.3.6.1.4.1.18.3.5.2.7.1 |
wfivStaticAdjCreateDelete'This value determines whether the static adjacency is configured'rw Enumeration .1.3.6.1.4.1.18.3.5.2.7.1.1 |
wfivStaticAdjEnableDisable'This value determines whether the static adjacency is active 'rw Enumeration .1.3.6.1.4.1.18.3.5.2.7.1.2 |
wfivStaticAdjArea'DECnet Phase IV area number for this static Adjacency.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.7.1.3 |
wfivStaticAdjNodeid'DECnet Phase IV node address for this static adjacency.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.7.1.4 |
wfivStaticAdjCircuitID'The circuit used for this static adjacency.'ro INTEGER .1.3.6.1.4.1.18.3.5.2.7.1.5 |
wfivStaticAdjNodeAddr'The address of the adjacent node in display format.'ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.2.7.1.6 |
wfivStaticAdjType' Specifies whether the static adjacency is to a router or end
station.'rw Enumeration .1.3.6.1.4.1.18.3.5.2.7.1.7 |
wfivStaticAdjPriority' Specifies the priority of the static adjacency if it's a
router.'rw INTEGER .1.3.6.1.4.1.18.3.5.2.7.1.8 |
wfivStaticAdjDestMACAddr' Specifies the destination MAC address of the Static Adjacency
if the circuit type is Frame Relay or SMDS.'rw OCTET STRING .1.3.6.1.4.1.18.3.5.2.7.1.9 |
wfInternet OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3 |
wfArpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.1 |
wfIpRouting OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.2 |
wfIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.2.1 |
wfRipGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.2.2 |
wfOspfGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.2.3 |
wfEgpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.2.4 |
wfBgpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.2.5 |
wfTcpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.3 |
wfUdpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.4 |
wfSnmpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.5 |
wfFakeEvent OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.5.4 |
wfFakeEventStringA dummy display string. While no string will actually be kept here, the
full identifier (object id + attribute id + instance ID ) will be used to
wrap event strings passed from the system logger into an SNMP Trap message.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.3.5.4.1 |
wfTelnetGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.7 |
wfBootpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.8 |
wfAppletalkGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.4 |
wfAppleBase OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.4.1 |
wfAppleBaseDeleteCreate/Delete parameter for determining whether
or not AppleTalk is configured on this slot.rw Enumeration .1.3.6.1.4.1.18.3.5.4.1.1 |
wfAppleBaseDisableEnable/Disable parameter for determining whether
or not to startup AppleTalk.rw Enumeration .1.3.6.1.4.1.18.3.5.4.1.2 |
wfAppleBaseStateThis parameter relfects the current state of AppleTalk.ro Enumeration .1.3.6.1.4.1.18.3.5.4.1.3 |
wfAppleBaseDebugLevelAppletalk has control of what debug and info messages
are printed.rw INTEGER .1.3.6.1.4.1.18.3.5.4.1.4 |
wfAppleBaseDdpQueLenQueue clipping is done on all packets destined for the port.
This is the length of the queue.rw Enumeration .1.3.6.1.4.1.18.3.5.4.1.5 |
wfAppleBaseHomedPortThe circuit number of the port on which NBP will register this
router.rw INTEGER .1.3.6.1.4.1.18.3.5.4.1.6 |
wfAppleBaseTotalNetsThe circuit number of the port on which NBP will register this
router.ro INTEGER .1.3.6.1.4.1.18.3.5.4.1.7 |
wfAppleBaseTotalZonesThe circuit number of the port on which NBP will register this
router.ro INTEGER .1.3.6.1.4.1.18.3.5.4.1.8 |
wfAppleRtmpTableThe table of elements of AppleTalk's routing RTMP table SEQUENCE OF WfAppleRtmpEntry .1.3.6.1.4.1.18.3.5.4.2 |
wfAppleRtmpEntryAn entry in the Routing table WfAppleRtmpEntry .1.3.6.1.4.1.18.3.5.4.2.1 |
wfAppleRtmpNetStartThe destinatination network range of this
route to which this entry pertains. The route
is considered the best route to that network.
There wil only be one route to a single destination.
The address will be in the form of
[network min - network max].ro INTEGER .1.3.6.1.4.1.18.3.5.4.2.1.1 |
wfAppleRtmpNetEndThe network max in the destination network range
to which the routing entry pertains.ro INTEGER .1.3.6.1.4.1.18.3.5.4.2.1.2 |
wfAppleRtmpPortThe index value which uniquely identifies the
local interface through which the next hop of
this route should be reached. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.4.2.1.3 |
wfAppleRtmpHopsThe routing metric to get to this destination
network. The measurement is in terms of hops.ro INTEGER .1.3.6.1.4.1.18.3.5.4.2.1.4 |
wfAppleRtmpNextHopNetThe AppleTalk net of the next hop router for this route.ro INTEGER .1.3.6.1.4.1.18.3.5.4.2.1.5 |
wfAppleRtmpNextHopNodeThe AppleTalk node of the next hop router for this route.ro INTEGER .1.3.6.1.4.1.18.3.5.4.2.1.6 |
wfAppleRtmpStateThe state of this routing entry: (G)ood,
(S)uspect, (GB) GoingBad, or (B)ad. Setting
this object to the value bad(4) has the effect
of invalidating the corresponding entry in
the RTMP table.rw Enumeration .1.3.6.1.4.1.18.3.5.4.2.1.7 |
wfApplePortTableThe port descriptor table that describes the
configuration parameters for this port of
the AppleTalk Router. SEQUENCE OF WfApplePortEntry .1.3.6.1.4.1.18.3.5.4.3 |
wfApplePortEntryAn entry in the Port Descriptor table WfApplePortEntry .1.3.6.1.4.1.18.3.5.4.3.1 |
wfApplePortDeleteCreate/Delete parameter. Users perform an SNMP SET
operation on this object to create/delete an AppleTalk
interface. The default is create.rw Enumeration .1.3.6.1.4.1.18.3.5.4.3.1.1 |
wfApplePortDisableEnable/Disable parameter. Users perforn an SNMP SET
operation on this object to enable/disable an AppleTalk
interface. Default is enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.4.3.1.2 |
wfApplePortCircuitThe circuit number for this interfacero INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.3 |
wfApplePortStateThe current state of the AppleTalk port.ro Enumeration .1.3.6.1.4.1.18.3.5.4.3.1.4 |
wfApplePortTypeThe type for the portro INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.5 |
wfApplePortCksumDisableFlag to enable/disable the calculation of the
DDP checksum for packets sourced by the router
over this interface. This value has no effect
on incoming packets.rw Enumeration .1.3.6.1.4.1.18.3.5.4.3.1.6 |
wfApplePortTrEndStationWhen an interface is running token ring this attribute
allows for end station source routing. If the interface
is not running token ring the attribute has no meaning.rw Enumeration .1.3.6.1.4.1.18.3.5.4.3.1.7 |
wfApplePortGniForeverDuring initialization default behavior is to send 3
GetNetInfos and then shut down the port. This will
send GetNetInfos forever.rw INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.8 |
wfApplePortAarpFlushSetting this to a non-null value causes the aarp table
to be emptied of all entries.ro INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.9 |
wfApplePortMacAddressConfigured mac addressrw OCTET STRING .1.3.6.1.4.1.18.3.5.4.3.1.10 |
wfApplePortNodeIdThe AppleTalk node id configured for this
port/interface.rw INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.11 |
wfApplePortNetworkThe Network NUMBER for this interface/port.rw INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.12 |
wfApplePortNetStartThe Network start value in the network range
for this interface/port.rw INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.13 |
wfApplePortNetEndThe Network end value in the network range
for this interface/port.rw INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.14 |
wfApplePortDfltZoneThe default zone name for this network range/
interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.4.3.1.15 |
wfApplePortCurMacAddressMac Address usedro OCTET STRING .1.3.6.1.4.1.18.3.5.4.3.1.16 |
wfApplePortCurNodeIdThe AppleTalk node id of this portro INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.17 |
wfApplePortCurNetworkThe network number for this port.ro INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.18 |
wfApplePortCurNetStartThe Network start value in the network range
for this port.ro INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.19 |
wfApplePortCurNetEndThe Network end value in the network range
for this port.ro INTEGER .1.3.6.1.4.1.18.3.5.4.3.1.20 |
wfApplePortCurDfltZoneThe default zone name for this portro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.4.3.1.21 |
wfApplePortAarpProbeRxsThe number of AARP Probe packets received on
this interface.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.22 |
wfApplePortAarpProbeTxsThe number of AARP Probe packets transmitted on
this interface.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.23 |
wfApplePortAarpReqRxsThe number of AARP Request packets received on
this interface.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.24 |
wfApplePortAarpReqTxsThe number of AARP Request packets transmitted on
this interface.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.25 |
wfApplePortAarpRspRxsThe number of AARP Response packets received on
this interface.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.26 |
wfApplePortAarpRspTxsThe number of AARP Response packets transmitted on
this interface.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.27 |
wfApplePortDdpOutRequestsThe total number of DDP datagrams which were supplied
to DDP by local DDP clients in requests for
transmission. Note that this counter does not
include any datagrams counted in ddpForwRequests.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.28 |
wfApplePortDdpInReceivesThe total number of input datagrams received by DDP,
including those received in error.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.29 |
wfApplePortDdpInLocalDatagramsThe total number of input DDP datagrams for which this
entity was their final DDP destination.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.30 |
wfApplePortDdpNoProtocolHandlersThe total number of DDP datagrams addressed to this
entity that were addressed to an upper layer protocol
for which no protocol handler existed.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.31 |
wfApplePortDdpTooShortErrorsThe total number of input DDP datagrams dropped because
the received data length was less than the data length
specified in the DDP header or the received data length
was less than the length of the expected DDP header.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.32 |
wfApplePortDdpTooLongErrorsThe total number of input DDP datagrams dropped because
the received data length was greater than the data length
specified in the DDP header or because they exceeded the
maximum DDP datagram size.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.33 |
wfApplePortDdpChecksumErrorsThe total number of input DDP datagrams for which this
DDP entity was their final destination, and which were
dropped because of a checksum error.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.34 |
wfApplePortDdpForwRequestsThe number of input datagrams for which this entity was
not their final DDP destination, as a result of which an
attempt was made to find a route to forward them to that
final destination.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.35 |
wfApplePortDdpOutNoRoutesThe total number of DDP datagrams dropped because a
route could not be found to their final destination.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.36 |
wfApplePortDdpBroadcastErrorsThe total number of input DDP datagrams dropped because
this entity was not their final destination and they
were addressed to the link level broadcast.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.37 |
wfApplePortDdpHopCountErrorsThe total number of input DDP datagrams dropped because
this entity was not their final destination and their
hop count would exceed 15.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.38 |
wfApplePortRtmpInDataPktsA count of the number of good RTMP data packets
received by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.39 |
wfApplePortRtmpOutDataPktsA count of the number of RTMP packets sent by this
entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.40 |
wfApplePortRtmpInRequestPktsA count of the number of good RTMP Request packets
received by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.41 |
wfApplePortRtmpNextIREqualChangesA count of the number of times RTMP changes the Next
Internet Router in a routing entry because the hop count
advertised in a routing tuple was equal to the current
hop count for a particular network.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.42 |
wfApplePortRtmpNextIRLessChangesA count of the number of times RTMP changes the Next
Internet Router in a routing entry because the hop count
advertised in a routing tuple was less than the current
hop count for a particular network.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.43 |
wfApplePortRtmpRouteDeletesA count of the number of times RTMP deletes a route because
it was aged out of the table. This can help to detect
routing problems.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.44 |
wfApplePortRtmpNetworkMismatchErrorsThe number of times RTMP receives a Data packet from a
router who claims to be on a different network than that
configured for the receiving port. This can help to
detect configuration errors.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.45 |
wfApplePortRtmpRoutingTableOverflowsThe number of times RTMP attempted to add a route
to the RTMP table but failed due to overflow.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.46 |
wfApplePortZipInZipQueriesThe number of ZIP Queries received by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.47 |
wfApplePortZipInZipRepliesThe number of ZIP Replies received by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.48 |
wfApplePortZipOutZipRepliesThe number of ZIP Replies sent by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.49 |
wfApplePortZipInZipExtendedRepliesThe number of ZIP Extended Replies received by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.50 |
wfApplePortZipOutZipExtendedRepliesThe number of ZIP Extended Replies sent by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.51 |
wfApplePortZipInGetZoneListsThe number of ZIP GetZoneList transactions received by
this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.52 |
wfApplePortZipOutGetZoneListRepliesThe number of ZIP GetZoneListReply transactions sent by
this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.53 |
wfApplePortZipInGetLocalZonesThe number of ZIP GetLocalZone transactions received
by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.54 |
wfApplePortZipOutGetLocalZoneRepliesThe number of ZIP GetLocalZoneReply transactions sent
by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.55 |
wfApplePortZipInGetMyZonesThe number of ZIP GetMyZone transactions received by
this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.56 |
wfApplePortZipOutGetMyZoneRepliesThe number of ZIP GetMyZoneReply transactions sent by
this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.57 |
wfApplePortZipZoneConflictErrorsThe number of times a conflict has been detected between
this entity's zone information and another entity's
zone information.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.58 |
wfApplePortZipInGetNetInfosThe number of ZIP GetNetInfo packets received on this
port by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.59 |
wfApplePortZipOutGetNetInfoRepliesThe number of ZIP GetNetInfoReply packets sent out this
port by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.60 |
wfApplePortZipZoneOutInvalidsThe number of times this entity has sent a ZIP GetNetInfo
Reply with the zone invalid bit set in response to a
GetNetInfo Request with an invalid zone name.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.61 |
wfApplePortZipAddressInvalidsThe number of times this entity had to broadcast a ZIP
GetNetInfo Reply because the GetNetInfo Request had an
invalid address.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.62 |
wfApplePortZipOutGetNetInfosThe number of ZIP GetNetInfo packets sent out this port
by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.63 |
wfApplePortZipInGetNetInfoRepliesThe number of ZIP GetNetInfoReply packets received on
this port by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.64 |
wfApplePortZipOutZipQueriesThe number of ZIP Queries sent by this entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.65 |
wfApplePortZipInErrorsThe number of ZIP packets received by this entity
that were rejected for any error.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.66 |
wfApplePortNbpInLookUpRequestsThe number of NBP LookUp Requests received.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.67 |
wfApplePortNbpInLookUpRepliesThe number of NBP LookUp Replies received.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.68 |
wfApplePortNbpInBroadcastRequestsThe number of NBP Broadcast Requests received.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.69 |
wfApplePortNbpInForwardRequestsThe number of NBP Forward Requests received.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.70 |
wfApplePortNbpOutLookUpRequestsThe number of NBP LookUp Requests sent.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.71 |
wfApplePortNbpOutLookUpRepliesThe number of NBP LookUp Replies sent.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.72 |
wfApplePortNbpOutBroadcastRequestsThe number of NBP Broadcast Requests sent.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.73 |
wfApplePortNbpOutForwardRequestsThe number of NBP Forward Requests sent.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.74 |
wfApplePortNbpRegistrationFailuresThe number of times this node experienced a failure in
attempting to register an NBP entity.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.75 |
wfApplePortNbpInErrorsThe number of NBP packets received by this entity that were
rejected for any error.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.76 |
wfApplePortEchoRequestsThe number of AppleTalk Echo requests received.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.77 |
wfApplePortEchoRepliesThe number of AppleTalk Echo replies sent.ro Counter .1.3.6.1.4.1.18.3.5.4.3.1.78 |
wfAppleLclZoneTableThe Local Zone table describes a list of zone names s
serviced by a particular AppleTalk port/interface.
In other words, the list of zone names that are
associated with a particular network range. SEQUENCE OF WfAppleLclZoneEntry .1.3.6.1.4.1.18.3.5.4.4 |
wfAppleLclZoneEntryAn entry in the Local Zone table WfAppleLclZoneEntry .1.3.6.1.4.1.18.3.5.4.4.1 |
wfAppleLclZoneDeleteCreate/Delete parameter for adding/deleting a
zone name to the Local Zone List for a particular
AppleTalk network interface.rw Enumeration .1.3.6.1.4.1.18.3.5.4.4.1.1 |
wfAppleLclZonePortCircuitThe circuit number for the corresponding AppleTalk interface
/port for this zone list.ro INTEGER .1.3.6.1.4.1.18.3.5.4.4.1.2 |
wfAppleLclZoneIndexA unique value for this zone name.ro INTEGER .1.3.6.1.4.1.18.3.5.4.4.1.3 |
wfAppleLclZoneNameOne of the local zone names defined for this/
interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.4.4.1.4 |
wfAppleAarpTableThe AppleTalk Address Translation table
contains a mapping of AppleTalk Network addresses
to its corresponding physical address. SEQUENCE OF WfAppleAarpEntry .1.3.6.1.4.1.18.3.5.4.5 |
wfAppleAarpEntryAn entry in the Address Mapping table WfAppleAarpEntry .1.3.6.1.4.1.18.3.5.4.5.1 |
wfAppleAarpIfIndexThe unique value for this interface/cct. This
value is the same interface as identified by
the value of ifIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.4.5.1.1 |
wfAppleAarpNetThe host's AppleTalk address (Net.Nodeid). This
address corresponds to the media-dependent 'physical'
address for this host.ro INTEGER .1.3.6.1.4.1.18.3.5.4.5.1.2 |
wfAppleAarpNodeThe host's AppleTalk address (Net.Nodeid). This
address corresponds to the media-dependent 'physical'
address for this host.ro INTEGER .1.3.6.1.4.1.18.3.5.4.5.1.3 |
wfAppleAarpPhysAddressThe media-dependent 'physical' address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.4.5.1.4 |
wfAppleZipTableThe Zone Information table for reachable AppleTalk
Networks. SEQUENCE OF WfAppleZipEntry .1.3.6.1.4.1.18.3.5.4.6 |
wfAppleZipEntryAn entry in the Zone Information table WfAppleZipEntry .1.3.6.1.4.1.18.3.5.4.6.1 |
wfAppleZipZoneNetStartThe network that starts the range for this entry.ro INTEGER .1.3.6.1.4.1.18.3.5.4.6.1.1 |
wfAppleZipZoneNetEndThe network that ends the range for this entry.ro INTEGER .1.3.6.1.4.1.18.3.5.4.6.1.2 |
wfAppleZipIndexThe unique value for this zone name.ro INTEGER .1.3.6.1.4.1.18.3.5.4.6.1.3 |
wfAppleZipZoneNameThe ASCII xone name of this entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.4.6.1.4 |
wfAppleZipZoneStateThe state of the ZIP entry. Setting this object
to the value invalid(2) has the effect of
invalidating the corresponding entry in the ZipTable.
It effectively, disassociates the mapping identified
with this entry.ro Enumeration .1.3.6.1.4.1.18.3.5.4.6.1.5 |
wfIpxGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.5 |
wfOsiGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.6 |
wfVinesGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.8 |
wfWanGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9 |
wfFrameRelayGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.1 |
wfFrDlcmiTableThe Parameters for the Data Link Connection Management Interface SEQUENCE OF WfFrDlcmiEntry .1.3.6.1.4.1.18.3.5.9.1.1 |
wfFrDlcmiEntryThe parameters for a particular Data Link Connection Management Interface WfFrDlcmiEntry .1.3.6.1.4.1.18.3.5.9.1.1.1 |
wfFrDlcmiDeleteIndication to delete this frame relay interfacerw Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.1 |
wfFrDlcmiDisableIndicates when a dlcmi entry is to be enabled or disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.2 |
wfFrDlcmiStateThe current state of Frame Relay. The not present state is not actually
valid except when the record is first added. It is included for
consistency.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.3 |
wfFrDlcmiCircuitInstance identifier. The circuit number of this entryro INTEGER .1.3.6.1.4.1.18.3.5.9.1.1.1.4 |
wfFrDlcmiManagementTypeThis variable indicates which Data Link Connection Management
scheme is active (and by implication, what DLCI it uses).rw Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.5 |
wfFrDlcmiStatusIndicates the status of the interface.
FR_STATUS_START is the state during rebooting or initial
start of circuit
FR_STATUS_RUNNING is the sate after the circuit is up (either LMI
successful or there is no DLCMI and the system just comes up).
FR_STATUS_FAULT is a transient state indicating that errors have
caused the circuit to be disabled until DLCMI recovery.
FR_STATUS_RECOVERED indicates that an the system has been in the
FR_STATUS_FAULT mode before, but has since recovered.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.6 |
wfFrDlcmiAddressThis states which address format is in use on the FR interface.
The default is Q922rw Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.7 |
wfFrDlcmiAddressLenThis variable states the address length in octets. In the case
of Q922 format, the length indicates the entire length of the
address includeding the control portion.rw Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.8 |
wfFrDlcmiPollingIntervalThe number of seconds between successive status enquiry messagesrw Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.9 |
wfFrDlcmiFullEnquiryIntervalThe number of status enquiry intervals that pass before issuance
of a full status enquiry message.rw Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.10 |
wfFrDlcmiErrorThresholdThis is the maximum number of unanswered Status Enquiries the
equipment shall accept before declaring the interface down.rw INTEGER .1.3.6.1.4.1.18.3.5.9.1.1.1.11 |
wfFrDlcmiMonitoredEventsThis is the number of status polling intervals over
which the error threshold is counted. For example, if
within 'MonitoredEvents' number of events the station
receives 'ErrorThreshold' number of errors, the
interface is marked as down.rw INTEGER .1.3.6.1.4.1.18.3.5.9.1.1.1.12 |
wfFrDlcmiMaxSupportedVCsThe maximum number of Virtual Circuits allowed for
this interface. Usually dictated by the Frame Relay
network. The system sets this initially.ro INTEGER .1.3.6.1.4.1.18.3.5.9.1.1.1.13 |
wfFrDlcmiMulticastThis indicates whether the frame relay provider offers a multicastrw Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.14 |
wfFrDlcmiSeqCountThis station's sequence counter. It represents the next
value to send.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.15 |
wfFrDlcmiLastReceivedThe sequence number just received from the switch.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.16 |
wfFrDlcmiPassiveSeqCountThis station's sequence counter for answering status enquiry.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.17 |
wfFrDlcmiPassiveReceivedThe sequence number just received from the enquring station.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.18 |
wfFrDlcmiPollsThis is the counter of where we are in the polling cycle.ro INTEGER .1.3.6.1.4.1.18.3.5.9.1.1.1.19 |
wfFrDlcmiAlarmTimerThis is a counter of 1/2 second timeouts. When it reaches
2 x the polling interval, an enquiry message is sent.ro INTEGER .1.3.6.1.4.1.18.3.5.9.1.1.1.20 |
wfFrErrTypeIndicate the type of the last specific monitored error.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.1.1.21 |
wfFrErrDataContains as much of the error packet as possible.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.1.1.1.22 |
wfFrErrTimeThe time the last error occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.1.1.1.23 |
wfFrErrDiscardsThe number of inbound frames dropped because of format or other
errors or because the VC was not known.ro Counter .1.3.6.1.4.1.18.3.5.9.1.1.1.24 |
wfFrErrDropsThe number of outbound frames dropped. Usually this is due the
specified DLCI being unknown or a broadcast packet is too longro Counter .1.3.6.1.4.1.18.3.5.9.1.1.1.25 |
wfFrCircuitTableFrame Relay Circuit table gives information about a virtual circuits. SEQUENCE OF WfFrCircuitEntry .1.3.6.1.4.1.18.3.5.9.1.2 |
wfFrCircuitEntryAn entry in the Frame Relay Circuit table. WfFrCircuitEntry .1.3.6.1.4.1.18.3.5.9.1.2.1 |
wfFrCircuitDeleteIndication to delete this frame relay interface.rw Enumeration .1.3.6.1.4.1.18.3.5.9.1.2.1.1 |
wfFrCircuitNumberInstance identifier. The circuit number of this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.1.2.1.2 |
wfFrCircuitDlciInstance identifier. This indicates which virtual circuit.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.2.1.3 |
wfFrCircuitStateIndicates the state of the particular virtual circuit.ro Enumeration .1.3.6.1.4.1.18.3.5.9.1.2.1.4 |
wfFrCircuitStateSetUser access for setting the state of a virtual circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.1.2.1.5 |
wfFrCircuitReceivedFECNsNumber of frames received indicating forward congestion.ro Counter .1.3.6.1.4.1.18.3.5.9.1.2.1.6 |
wfFrCircuitReceivedBECNsNumber of frames received indicating backward congestion.ro Counter .1.3.6.1.4.1.18.3.5.9.1.2.1.7 |
wfFrCircuitSentFramesThe number of frames sent from this virtual circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.1.2.1.8 |
wfFrCircuitSentOctetsThe number of octets sent from this virtual circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.1.2.1.9 |
wfFrCircuitReceivedFramesThe number of frames received from this virtual circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.1.2.1.10 |
wfFrCircuitReceivedOctetsThe number of octets received from this virtual circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.1.2.1.11 |
wfFrCircuitCreationTimeThe value of sysUpTime when the vc was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.1.2.1.12 |
wfFrCircuitLastTimeChangeThe value of sysUpTime when last there was a change in vc state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.1.2.1.13 |
wfFrCircuitCommittedBurstIndicates the maximum amount of data, in bits, that the network
agrees to transfer under normal conditions, during the measurement
interval. Wellfleet does not presently support this.rw INTEGER .1.3.6.1.4.1.18.3.5.9.1.2.1.14 |
wfFrCircuitExcessBurstIndicates teh maximum amount of uncommitted data bits that the network
will attempt to deliver over the measurement interval. Wellfleet
does not presently support this.rw INTEGER .1.3.6.1.4.1.18.3.5.9.1.2.1.15 |
wfFrCircuitThroughputThis is the average number of 'Frame Relay Information Field'
bits transferred per second across a user network interface in one
direction, measured over the measurement interval. Wellfleet
does not presently support this.rw INTEGER .1.3.6.1.4.1.18.3.5.9.1.2.1.16 |
wfFrCircuitMulticastIndicates whether this DLCI is used for multicast or single destination.rw Enumeration .1.3.6.1.4.1.18.3.5.9.1.2.1.17 |
wfFrCircuitDiscardsThe number of inbound frames discarded because of format errors,
because the VC is inactive or because the protocol was not registered
for this circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.1.2.1.18 |
wfFrCircuitDropsIndicates how many outbound frames were dropped. Usually these are
dropped because the VC is not active.ro Counter .1.3.6.1.4.1.18.3.5.9.1.2.1.19 |
wfFrCircuitSubCctCircuit number to use for this VC when configured in hybrid
(for bridging) or direct access (VC as a circuit) mode.rw INTEGER .1.3.6.1.4.1.18.3.5.9.1.2.1.20 |
wfFrCircuitModeThe mode of the given VC.
GROUP - treats the VC as one of many vc's on a circuit.
HYBRID - treats the VC as one of many vc's on a circuit for
protocol traffic, but as a separate circuit for bridging.
DIRECT - treats the VC as a separate circuit for all applications.rw Enumeration .1.3.6.1.4.1.18.3.5.9.1.2.1.21 |
wfPppGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.2 |
wfX25Group OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.4 |
wfAtmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5 |
wfXnsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.10 |
wfHwfLineNumberLine number
::= { wfHwfLineEntry 3 }
wfHwfLineCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTIONro Enumeration .1.3.6.1.4.1.18.3.5.10.7.1.10 |
wfTestGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.11 |
wfHwfSlotSlot number
::= { wfHwfEntry 4 }
wfHwfAvailableLines OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTIONro Enumeration .wfHwfLineEntry.2 |