Wellfleet-ATM-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-ATM-MIB.
815
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
815 total| Object Name |
|---|
wfAtmCommonGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.23.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.4.23.1 |
wfAtmInterfaceConfTableThis table contains ATM local interface configuration parameters,
one entry per ATM interface port, beyond those supported using the
ifTable. SEQUENCE OF WfAtmInterfaceConfEntry .1.3.6.1.4.1.18.3.4.23.1.1 |
wfAtmInterfaceConfEntryEntry definition. WfAtmInterfaceConfEntry .1.3.6.1.4.1.18.3.4.23.1.1.1 |
wfAtmInterfaceConfDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.1 |
wfAtmInterfaceConfIndexUniquely identifies the interface (port) that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.1.1.2 |
wfAtmInterfaceAdminStatusSpecifies the desired administrative state of the Interface. The up and
down states indicate that the traffic flow is enabled and disabled
respectively for the VCL.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.3 |
wfAtmInterfaceOperStatusIndicates the current operational status of the Interface. The up and
down states indicate that the Interface is currently operational, or not
operational, respectively. The Init state indicates the status
of the Interface is in the process of being initialized and has not yet
completed. The 'Not Present' state indicates a problem with that
Interface and is not able to bring the Interface up.ro Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.4 |
wfAtmInterfaceMaxVpcsThe maximum number of VPCs supported at the ATM interface.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.1.1.5 |
wfAtmInterfaceMaxVccsThe maximum number of VCCs supported at the ATM interface.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.1.1.6 |
wfAtmInterfaceConfVpcsThe number of VPCs configured for use at the ATM interface.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.1.1.7 |
wfAtmInterfaceConfVccsThe number of VCCs configured for use at the ATM interface.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.1.1.8 |
wfAtmInterfaceMaxActiveVpiBitsThe maximum number of active VPI bits configured for use at the
ATM interface.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.1.1.9 |
wfAtmInterfaceMaxActiveVciBitsThe maximum number of active VCI bits configured for use at the
ATM interface.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.1.1.10 |
wfAtmInterfaceIlmiVpiThe VPI value of the VCC supporting the ILMI at this ATM interface.
If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci
are both equal to zero then the ILMI is not supported at this ATM
interface. Subract 1 from the default! (ILMI VPI = 0).rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.11 |
wfAtmInterfaceIlmiVciThe VCI value of the VCC supporting the ILMI at this ATM interface.
If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci
are both equal to zero then the ILMI is not supported at this ATM
interface.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.12 |
wfAtmInterfaceAddressTypeThe type of ATM address configured for use at the ATM interface.ro Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.13 |
wfAtmInterfaceCctThe Wellfleet circuit number of this entryro INTEGER .1.3.6.1.4.1.18.3.4.23.1.1.1.14 |
wfAtmInterfaceDropsThe cumulative count of packet drops on this ATM Interface above the
SSCS layer.ro Counter .1.3.6.1.4.1.18.3.4.23.1.1.1.15 |
wfAtmInterfaceSigEnableSpawning of ATM Signalling by the Control gate is determined by this attrrw Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.16 |
wfAtmInterfaceDebugThis flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging (default)
2 - enable Signalling Layer Manager inbound and outbound messages
4 - enable CC inbound messages
8 - enable CC outbound messages
16 - enable CC<->APP messages
32 - enable CC<->DRV messages
64 - enable CC<->TRILL messages
128 - enable CC PVC Interface FSM messages
256 - enable CC PVC Interface FSM messages
4294967295 - All of the aboverw Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.17 |
wfAtmInterfaceUseHwMacAddrIf this is enabled, then the auto-generated ESI portion of
the ATM address user suffix will be supplied by the hardware
driver. If disabled, it will come from
wfAtmInterfaceHwMacOverride.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.18 |
wfAtmInterfaceHwMacOverrideIf wfAtmInterfaceUseHwMacAddr is disabled, this 48-bit Mac
address will replace the hardware driver's address during
auto-generation of the ESI portion of the ATM address user
suffix.rw OCTET STRING .1.3.6.1.4.1.18.3.4.23.1.1.1.19 |
wfAtmServicePqOverrideThis value denotes whether driver level PQ is to be applied
to packets or driver decides to use the priority set by
service level PQ, if both service level and driver level PQ
is used.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.1.1.20 |
wfAtmServiceRecordTableThis table contains ATM service record configuration parameters,
one entry per ATM Wellfleet cct. SEQUENCE OF WfAtmServiceRecordEntry .1.3.6.1.4.1.18.3.4.23.1.2 |
wfAtmServiceRecordEntryEntry definition. WfAtmServiceRecordEntry .1.3.6.1.4.1.18.3.4.23.1.2.1 |
wfAtmServiceRecordDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.1 |
wfAtmServiceRecordEnableEnable/Disable MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.2 |
wfAtmServiceRecordIndexUniquely identifies the interface (port) that contains the
appropriate port information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.2.1.3 |
wfAtmServiceRecordCctThe Wellfleet circuit number of this entryro INTEGER .1.3.6.1.4.1.18.3.4.23.1.2.1.4 |
wfAtmServiceRecordAalEncapsTypeThe type of data encapsulation used over both AAL3/4 and
AAL5 SSCS layer. Currently, the only values supported are :
ATM_SERVICEREC_ENCAPS_LLCENCAPS - RFC1483
ATM_SERVICEREC_ENCAPS_FRSSCS - RFC1294
ATM_SERVICEREC_ENCAPS_ROUTEDPROTO - NONErw Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.5 |
wfAtmServiceRecordStateState of Service Recordro Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.6 |
wfAtmServiceRecordVcTypeThe type of VC for each encapsulation. Applicable for LLC
and null type encapsulation enforced from SM - aks.
'muxedSvc' indicates SVCs that can be shared between
applications for encapsulations that support muxing.
'control' should not a configurable option. It is defined for
consistency with wfAtmVclVcTyperw Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.7 |
wfAtmServiceRecordNetworkPrefixATM Address Network portionrw OCTET STRING .1.3.6.1.4.1.18.3.4.23.1.2.1.8 |
wfAtmServiceRecordUserSuffixATM Address User portionrw OCTET STRING .1.3.6.1.4.1.18.3.4.23.1.2.1.9 |
wfAtmServiceRecordAtmAddressATM Address Complete - Inserted by Router after verification of
network and user portionsro OCTET STRING .1.3.6.1.4.1.18.3.4.23.1.2.1.10 |
wfAtmServiceRecordFlagThis will be used for internal purposes to have Site Manager flag
specific configurations.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.11 |
wfAtmServiceRecordMtuThe size of the largest packet to be used for send/receive on all
logical interfaces defined on this service record. This attribute is
an alias for 'ifMtu'.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.2.1.12 |
wfAtmServiceRecordLossPriorityPolicyThis is relevant only for Frame Relay Switch product.
This indicates the policy for translating FR DE to
ATM CLP on IP truks over ATM.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.13 |
wfAtmServiceRecordDebugThis flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging (default)
2 - enable Service State Machine debugging
4294967295 - All of the aboverw Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.14 |
wfAtmServiceRecordNameUser name for circuitrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.23.1.2.1.15 |
wfAtmServiceRecordWanSvcRoutingModeThis applies ONLY to WAN SVC type ATM service records.
It specifies the route updates mode for the WAN SVCs.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.2.1.16 |
wfAtmVclConfTable SEQUENCE OF WfAtmVclConfEntry .1.3.6.1.4.1.18.3.4.23.1.5 |
wfAtmVclConfEntryEntry definition. WfAtmVclConfEntry .1.3.6.1.4.1.18.3.4.23.1.5.1 |
wfAtmVclConfDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.1 |
wfAtmVclConfIndexUniquely identifies the interface (port) that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.2 |
wfAtmVclConfVpiThe VPI value of the VCL. The maximum VPI value cannot exceed the
value allowable by the wfAtmInterfaceMaxActiveVpiBits.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.3 |
wfAtmVclConfVciThe VCI value of the VCL. The maximum VCI value cannot exceed the
value allowable by the wfAtmInterfaceMaxActiveVciBits.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.4 |
wfAtmVclAdminStatusSpecifies the desired administrative state of the VCL. The up and
down states indicate that the traffic flow is enabled and disabled
respectively for the VCL.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.5 |
wfAtmVclOperStatusIndicates the current operational status of the VCL. The up and
down states indicate that the VCL is currently operational, or not
operational, respectively. The Init state indicates the status
of the VCL is in the process of being initialized and has not yet
completed. The 'Not Present' state indicates a problem with that
VCL and is not able to bring the VCC up. The 'misconfig' state
indicates the VC is misconfigured.ro Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.6 |
wfAtmVclLastChangeThe value of MIBII's sysUpTime at the time this VCL entered its
current operational state. If the current state was entered prior
to the last re-initialization of the agent then this object
contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.4.23.1.5.1.7 |
wfAtmVclXmtPeakCellRateTransmit (Forward) Peak Cell Rate in cells/second. This specifies
the upper bound on the traffic that can be submitted on an ATM
connection.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.8 |
wfAtmVclXmtSustainableCellRateTransmit (Forward) Sustainable Cell Rate in cells/second. This specifies
the upper bound on the conforming average rate of an ATM connection,
where 'average rate' is the number of cells transmitted divided by
the 'duration of the connection'.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.9 |
wfAtmVclXmtBurstSizeTransmit (Forward) Burst Size in cells.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.10 |
wfAtmVclXmtQosClassTransmit (Forward) Quality of Service as specified in Appendix A,
Section 4 of the ATM Forum UNI Specification, Version 3.0rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.11 |
wfAtmVclRcvPeakCellRateReceive (Backward) Peak Cell Rate in cells/second. This specifies
the upper bound on the traffic that can be submitted on an ATM
connection.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.12 |
wfAtmVclRcvSustainableCellRateReceive (Backward) Sustainable Cell Rate in cells/second. This specifies
the upper bound on the conforming average rate of an ATM connection,
where 'average rate' is the number of cells transmitted divided by
the 'duration of the connection'.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.13 |
wfAtmVclRcvBurstSizeReceive (Backward) Burst Size in cells.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.14 |
wfAtmVclRcvQosClassReceive (Backward) Quality of Service as specified in Appendix A,
Section 4 of the ATM Forum UNI Specification, Version 3.0rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.15 |
wfAtmVclAalTypeThe type of AAL used on the VCL.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.16 |
wfAtmVclAalCpcsTransmitSduSizeThe maximum AAL CPCS SDU size in octets that is supported on the
transmit direction of this VCC.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.17 |
wfAtmVclAalCpcsReceiveSduSizeThe maximum AAL CPCS SDU size in octets that is supported on the
receive direction of this VCC.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.18 |
wfAtmVclAalEncapsTypeThe type of data encapsulation used over both AAL3/4 and
AAL5 SSCS layer. Currently, the only values supported are :
ATM_VCLENCAPS_LLCENCAPS - RFC1483
ATM_VCLENCAPS_ROUTEDPROTO - NONErw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.19 |
wfAtmVclCongestionIndicationThe desired state of the Congestion Indication (CI) bit in the
payload field of each ATM cell for this VCL.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.20 |
wfAtmVclCellLossPriorityThe desired state of the Cell Loss Priority (CLP) bit in the ATM
header of each cell for this VCL. For 'drop-preference', the CLP
bit will be set if the internal drop preference bit is set.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.21 |
wfAtmVclCctIdentifies the object which corresponds to the Wellfleet circuit
numberrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.22 |
wfAtmVclDirectAccessCctCircuit number to use for this VC for hybrid or direct access
routingrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.23 |
wfAtmVclMulticastIndicates whether this VPI/VCI is used for multicast or
single destination.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.24 |
wfAtmVclModeThe mode of the given VC.
GROUP - treats the VC as one of many vc's on a circuit.
HYBRID - treats the VC as one of many vc's on a circuit for
protocol traffic, but as a separate circuit for bridging.
DIRECT - treats the VC as a separate circuit for all applications.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.25 |
wfAtmVclDropsThe total count of packets above the SSCS layer dropped on this VCro Counter .1.3.6.1.4.1.18.3.4.23.1.5.1.26 |
wfAtmVclVcIndexDriver-defined VCI for quick table lookupro INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.27 |
wfAtmVclVcTypeType of VC can be either permanent or switched. Only
permanent VCs can be modfied. switchedMux is same as switched
but is included here to be consistent with
wfAtmServiceRecordVcTypero Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.28 |
wfAtmVclXmtTaggingTagging forward VC messages if peak/sustainable rates exceededrw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.29 |
wfAtmVclRcvTaggingTagging backward VC messages if peak/sustainable rates exceededrw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.30 |
wfAtmVclOamLpbkEnablePVC OAM F5 Loopback function.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.31 |
wfAtmVclOamLpbkCellIntervalThis is the time interval between two consecutive OAM
loopback cells in numbers of second.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.32 |
wfAtmVclOamLpbkThreshold1This is the number of consecutive loopback OAM cells lost
before the VC connection is declared down.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.33 |
wfAtmVclOamLpbkThreshold2This is the number of consecutive loopback OAM cells received
before the VC connection is declared up.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.34 |
wfAtmVclOamAlarmEnablePVC OAM F5 alarm function.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.35 |
wfAtmVclVcGroupThe group of VCs this VC is a member of. All VCs in a given
group will have the same VcGroup.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.36 |
wfAtmVclServiceClassThe internal service class of the traffic this VC will carryrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.37 |
wfAtmVclServiceCategoryThe service category for a connection.
other
cbr
vbrRt
vbrNRt
abr
ubr
ubrplus
Note:
May not be supported on all ATM-based platforms.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.38 |
wfAtmVclVBRTypeType 1 VBR: CLP=0+1 cells are rescheduled by PCR or SCR according
to the GCRA state.
Type 2 VBR: CLP=0 cells are rescheduled by PCR or SCR according
to the GCRA state. CLP=1 cells are always rescheduled
by PCR.
Note:
May not be supported on all ATM-based platforms.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.5.1.39 |
wfAtmVclXmtMinimumCellRateTransmit (Forward) Minimum Cell Rate in cells/second. This specifies
the minimum cell rate required by an ATM connection (the source is
always allowed to send at at LEAST this rate).
Note:
May not be supported on all ATM-based platforms and/or service categories.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.40 |
wfAtmVclXmtInitialCellRateTransmit (Forward) Initial Cell Rate in cells/second. The ICR is the
rate at which the source should send initially and after an idle period.
Note:
May not be supported on all ATM-based platforms and/or service categories.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.41 |
wfAtmVclXmtRateIncreaseFactorRate increase factor (RIF) controls the amount by which the cell Tx rate
may increase upon receipt of an RM (Resource Management) cell.
The value is a power of 2 from 1/32768 to 1.
Legal values are 0-15 (0==1, 15==1/32768).
The default is 4 (2**-4==1/16) as specified by af-tm-0056.000.
Note:
May not be supported on all ATM-based platforms and/or service categories.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.42 |
wfAtmVclXmtRateDecreaseFactorRate decrease factor (RDF) controls the decrease in the cell Tx rate.
The value is a power of 2 from 1/32768 to 1.
Legal values are 0-15 (0==1, 15==1/32768).
The default is 4 (2**-4==1/16) as specified by af-tm-0056.000.
Note:
May not be supported on all ATM-based platforms and/or service categories.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.5.1.43 |
wfAtmVclStatsTable SEQUENCE OF WfAtmVclStatsEntry .1.3.6.1.4.1.18.3.4.23.1.6 |
wfAtmVclStatsEntryEntry definition. WfAtmVclStatsEntry .1.3.6.1.4.1.18.3.4.23.1.6.1 |
wfAtmVclStatsIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.6.1.1 |
wfAtmVclStatsVpiThe Virtual Path Identifier (VPI) value of the VCL.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.6.1.2 |
wfAtmVclStatsVciThe Virtual Channel Identifier (VCI) value of the VCL.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.6.1.3 |
wfAtmVclStatsVcIndexUniquely identifies the virtual channel connection.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.6.1.4 |
wfAtmVclXmtCellsAccumulated total of user cells transmitted for this VCL. This
attribute is a 64-bit counter. Does not include OAM cells.ro OCTET STRING .1.3.6.1.4.1.18.3.4.23.1.6.1.5 |
wfAtmVclRcvCellsAccumulated total of user cells received for this VCL. This
attribute is a 64-bit counter. Does not include OAM cells.ro OCTET STRING .1.3.6.1.4.1.18.3.4.23.1.6.1.6 |
wfAtmVclRcvSequenceNumErrsNumber of times data was being reassembled and a SAR Protocol
Data Unit (PDU) was received out of order for this VCL. This
count is valid only when the adaptation layer protocol is
AAL 3/4.ro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.7 |
wfAtmVclRcvInvalidLenErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.8 |
wfAtmVclRcvMissingEomErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.9 |
wfAtmVclRcvBufferOflowErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.10 |
wfAtmVclRcvMaxLenExceedErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.11 |
wfAtmVclRcvTrailerErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.12 |
wfAtmVclRcvAbortErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.13 |
wfAtmVclRcvPacketLengthErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.14 |
wfAtmVclRcvReassemAbortErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.15 |
wfAtmVclRcvCrcErrsro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.16 |
wfAtmVclXmtOamCellsCount of OAM cells transmitted successfully.ro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.17 |
wfAtmVclRcvOamCellsCount of OAM cells received successfully.ro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.18 |
wfAtmVclRcvOamCrcErrsCount of OAM cells received with CRC10 error.ro Counter .1.3.6.1.4.1.18.3.4.23.1.6.1.19 |
wfAtmSigTableThis table includes the ATM Signalling MIB record for Q.93B SEQUENCE OF WfAtmSigEntry .1.3.6.1.4.1.18.3.4.23.1.7 |
wfAtmSigEntryThis entry contains attributes needed for ATM Q.93B WfAtmSigEntry .1.3.6.1.4.1.18.3.4.23.1.7.1 |
wfAtmSigDeleteCreate/Delete parameter. Default is created.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.7.1.1 |
wfAtmSigDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.4.23.1.7.1.2 |
wfAtmSigLineNumberInstance identifier. This value is the line number of the router.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.3 |
wfAtmSigAtmCctCircuit number of ATM driver associated with this Q.93B instancero INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.4 |
wfAtmSigStateIndicates the state of the Q.93B entityro Enumeration .1.3.6.1.4.1.18.3.4.23.1.7.1.5 |
wfAtmSigMaxServiceUsersMax number of SAPs (service access points) allowed for users to connectrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.6 |
wfAtmSigMaxPtPtConnectionsMax number of simultaneous point to point connections allowed per portrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.7 |
wfAtmSigMaxPtMultConnectionsMax number of simultaneous point to multipt connections allowed per portrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.8 |
wfAtmSigMaxPartiesInMultConnectMax number of simultaneous parties in a point to multipoint connectionrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.9 |
wfAtmSigMaxRoutingRegistrationsMax number of registrations / routing entries allowed per portrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.10 |
wfAtmSigMinBufferThresholdMin percentage of buffer pool that must be free to enable new calls (sub)rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.11 |
wfAtmSigTimerResolutionNumber of system ticks elapsed between successive timer events in tenthsrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.12 |
wfAtmSigVpiVirtual Path Identifier for the Signalling VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.13 |
wfAtmSigVciVirtual Channel Identifier for the Signalling VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.14 |
wfAtmSigStandardSig Protocol Standard, Uni3.0, Uni3.1, or Trillium Symmetrical Uni (sub)rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.7.1.15 |
wfAtmSigInterfaceTypeNetwork Interface type, either USER or NETWORK side (sub)rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.7.1.16 |
wfAtmSigMinVciPtPtMinimum VCI number that can be associated with a Point to Point VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.17 |
wfAtmSigMaxVciPtPtMaximum VCI number that can be associated with a Point to Point VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.18 |
wfAtmSigMinVpiPtPtMinimum VPI number that can be associated with a Point to Point VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.19 |
wfAtmSigMaxVpiPtPtMaximum VPI number that can be associated with a Point to Point VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.20 |
wfAtmSigMinVciPtMltPtMinimum VCI number that can be associated with a Point to Multipoint VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.21 |
wfAtmSigMaxVciPtMltPtMaximum VCI number that can be associated with a Point to Multipoint VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.22 |
wfAtmSigMinVpiPtMltPtMinimum VPI number that can be associated with a Point to Multipoint VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.23 |
wfAtmSigMaxVpiPtMltPtMaximum VPI number that can be associated with a Point to Multipoint VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.24 |
wfAtmSigT303Q.93B Setup Sent Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.25 |
wfAtmSigT308Q.93B Release Sent Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.26 |
wfAtmSigT309Q.93B - SAAL Data Link Connect Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.27 |
wfAtmSigT310Q.93B Call Proceeding Received Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.28 |
wfAtmSigT313Q.93B Connect Sent Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.29 |
wfAtmSigT316Q.93B Restart Request Sent on Interface Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.30 |
wfAtmSigT316cQ.93B Restart Request Sent on Channel Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.31 |
wfAtmSigT322Q.93B Status Enquiry Sent Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.32 |
wfAtmSigTDiscQ.93B SAAL Data Link Disconnect Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.33 |
wfAtmSigT398Q.93B Drop Party Sent Timer - Multipoint Connections onlyrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.34 |
wfAtmSigT399Q.93B Add Party Sent Timer - Multipoint Connections onlyrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.35 |
wfAtmSigNumRstNumber of restarts to be retransmitted before link considered downrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.36 |
wfAtmSigNumStatNumber of status enquiries to be retransmitted before link considered downrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.37 |
wfAtmSigRestartQ.93B send restart when the link comes up. (sub)rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.7.1.38 |
wfAtmSigDebugThis flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging
2 - Signalling Status events
4294967295 - All of the aboverw Enumeration .1.3.6.1.4.1.18.3.4.23.1.7.1.39 |
wfAtmSigCallsSecThe number of signaling messages per second allowed to flow
out of the interface (call pacing). Zero turns this
feature off.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.40 |
wfAtmSigT301Q.93B Alert Received Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.41 |
wfAtmSigT304Q.93B Setup Ack Received Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.42 |
wfAtmSigT397Q.93B Alerting or Add Party Alterting Received Timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.7.1.43 |
wfAtmSscopTableThis table includes the ATM SSCOP MIB record for Q.SAAL SEQUENCE OF WfAtmSscopEntry .1.3.6.1.4.1.18.3.4.23.1.8 |
wfAtmSscopEntryThis entry contains attributes needed for ATM Q.SAAL WfAtmSscopEntry .1.3.6.1.4.1.18.3.4.23.1.8.1 |
wfAtmSscopDeleteCreate/Delete parameter. Default is created.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.8.1.1 |
wfAtmSscopDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.4.23.1.8.1.2 |
wfAtmSscopLineNumberInstance identifier. This value is the line number of the router.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.3 |
wfAtmSscopAtmCctCircuit number of ATM driver associated with this Q.SAAL instancero INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.4 |
wfAtmSscopStateIndicates the state of the Q.SAAL entityro Enumeration .1.3.6.1.4.1.18.3.4.23.1.8.1.5 |
wfAtmSscopLowThresholdCongestion is reached when % of buffer pool goes below this threshold (sub)rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.6 |
wfAtmSscopUpThresholdCongestion is stopped when % of buffer pool goes above this threshold (sub)rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.7 |
wfAtmSscopArbitrationDetermines if Q.SAAL initiates link connection or waits for connect (sub)rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.8.1.8 |
wfAtmSscopPollTimerSSCOP Poll Timer. The Maximum time between transmission of a POLL PDU in tenths/secrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.9 |
wfAtmSscopKeepAliveTimerSSCOP Keep Alive Timer. If no pending SD or SDP PDU's transmit a POLL PDU in tenths/secrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.10 |
wfAtmSscopNoResponseTimerSSCOP No Response Timer. Max time between receipt of a STAT PDU in tenths/secrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.11 |
wfAtmSscopConnectControlTimerSSCOP CC Timer. Time between xmt of BGN, END as long as ACK not received in tenths/secrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.12 |
wfAtmSscopMaxCcSSCOP MaxCC. Maximum number of transmissions of a BGN, END or RS PDU.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.13 |
wfAtmSscopMaxPdSSCOP MaxPD. Maximum value of VT(PD) before transmitting POLL PDU.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.14 |
wfAtmSscopMaxStatSSCOP MaxSTAT. Maximum number of list elements permissible in a STAT PDUrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.15 |
wfAtmSscopIdleTimerSSCOP Idle Timer. Timer used to determine when to enter the
transient connection phase. Units in tenths/second.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.8.1.16 |
wfAtmSscopStandardSSCOP version switch. UNI_V30, UNI_V31 and UNI_V40 for now.
Probably no more than this.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.8.1.17 |
wfAtmSscopDebugThis flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging
2 - SSCOP Status events
4294967295 - All of the aboverw Enumeration .1.3.6.1.4.1.18.3.4.23.1.8.1.18 |
wfAtmIlmiTableThis table includes the ATM ILMI MIB record for UME/ILMI SEQUENCE OF WfAtmIlmiEntry .1.3.6.1.4.1.18.3.4.23.1.9 |
wfAtmIlmiEntryThis entry contains attributes needed for ATM UME/ILMI WfAtmIlmiEntry .1.3.6.1.4.1.18.3.4.23.1.9.1 |
wfAtmIlmiDeleteCreate/Delete parameter. Default is created.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.9.1.1 |
wfAtmIlmiDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.4.23.1.9.1.2 |
wfAtmIlmiLineNumberInstance identifier. This value is the line number of the router.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.3 |
wfAtmIlmiAtmCctCircuit number of ATM driver associated with this UME/ILMI instancero INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.4 |
wfAtmIlmiStateIndicates the state of the UME/ILMI entityro Enumeration .1.3.6.1.4.1.18.3.4.23.1.9.1.5 |
wfAtmIlmiLowThresholdCongestion is reached when % of buffer pool goes below this threshold (sub)rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.6 |
wfAtmIlmiUpThresholdCongestion is stopped when % of buffer pool goes above this threshold (sub)rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.7 |
wfAtmIlmiVpiVirtual Path Identifier for the UME/ILMI VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.8 |
wfAtmIlmiVciVirtual Channel Identifier for the UME/ILMI VCrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.9 |
wfAtmIlmiInterfaceTypeNetwork Interface type, either USER or NETWORK side of the UME/ILMIrw Enumeration .1.3.6.1.4.1.18.3.4.23.1.9.1.10 |
wfAtmIlmiLocalPortAAL UME/ILMI local port identifierro INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.11 |
wfAtmIlmiRemotePortAAL UME/ILMI remote port identifierro INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.12 |
wfAtmIlmiGetTimerUME/ILMI Get request timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.13 |
wfAtmIlmiGetRetryCntMax number of retransmissions of the UME/ILMI GET request before link downrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.14 |
wfAtmIlmiGetNextTimerUME/ILMI GetNext request timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.15 |
wfAtmIlmiGetNextRetryCntMax number of retransmits of the UME/ILMI GETNEXT request before link downrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.16 |
wfAtmIlmiSetTimerUME/ILMI Set request timerrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.17 |
wfAtmIlmiSetRetryCntMax number of retransmissions of the UME/ILMI SET request before link downrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.18 |
wfAtmIlmiLocalOidIdentifies the OID of the first object in the standard
DS1 or DS3 MIB corresponding to this ATM UNI portro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.23.1.9.1.19 |
wfAtmIlmiDebugThis flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging
2 - ILMI Status events
4294967295 - All of the aboverw Enumeration .1.3.6.1.4.1.18.3.4.23.1.9.1.20 |
wfAtmIlmiNetPrefixTimerTime to wait for a Net prefix before restarting UMErw INTEGER .1.3.6.1.4.1.18.3.4.23.1.9.1.21 |
wfAtmNetPrefixTableThis table includes the ATM Network Address Prefix record SEQUENCE OF WfAtmNetPrefixEntry .1.3.6.1.4.1.18.3.4.23.1.10 |
wfAtmNetPrefixEntryThis entry contains attributes needed for a ATM Network Address Prefix WfAtmNetPrefixEntry .1.3.6.1.4.1.18.3.4.23.1.10.1 |
wfAtmNetPrefixPortPort which uniquely identifies the UNI (ie. InterfaceIndex or line number)ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.10.1.1 |
wfAtmNetPrefixPrefixNetwork Prefix used on this UNIro OCTET STRING .1.3.6.1.4.1.18.3.4.23.1.10.1.2 |
wfAtmNetPrefixStatusStatus of Network Prefix (being used or not being used)ro Enumeration .1.3.6.1.4.1.18.3.4.23.1.10.1.3 |
wfAtmTableDebugTableThis is used to display the contents of internal ATM tables in the event log, for debug purposes. SEQUENCE OF WfAtmTableDebugEntry .1.3.6.1.4.1.18.3.4.23.1.11 |
wfAtmTableDebugEntryThis entry contains attributes needed for debugging internal ATM tables. WfAtmTableDebugEntry .1.3.6.1.4.1.18.3.4.23.1.11.1 |
wfAtmTableDebugDeleteCreate/Delete attribute.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.11.1.1 |
wfAtmTableDebugSlotSlot that we want to dump ATM tables from.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.11.1.2 |
wfAtmTableDebugTypeSlot that we want to dump ATM tables from.rw INTEGER .1.3.6.1.4.1.18.3.4.23.1.11.1.3 |
wfAtmVcGroupTableThis table contains VC grouping configuration paramters,
one entry per VC group. SEQUENCE OF WfAtmVcGroupEntry .1.3.6.1.4.1.18.3.4.23.1.12 |
wfAtmVcGroupEntryEntry definition. WfAtmVcGroupEntry .1.3.6.1.4.1.18.3.4.23.1.12.1 |
wfAtmVcGroupDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.12.1.1 |
wfAtmVcGroupCctThe circuit number that this VC group is configured for.ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.12.1.2 |
wfAtmVcGroupIndexUniquely identifies the VC group on a given circuitro INTEGER .1.3.6.1.4.1.18.3.4.23.1.12.1.3 |
wfAtmVcGroupNameThe name for the VC grouprw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.23.1.12.1.4 |
wfAtmSVCOptionsTableThis table contains ATM WAN SVC configuration parameters,
one entry for each remote ATM destination for which user
wishes to specify some/all of the VC config parameters. SEQUENCE OF WfAtmSVCOptionsEntry .1.3.6.1.4.1.18.3.4.23.1.13 |
wfAtmSVCOptionsEntryEntry definition. WfAtmSVCOptionsEntry .1.3.6.1.4.1.18.3.4.23.1.13.1 |
wfAtmSVCOptionsDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.13.1.1 |
wfAtmSVCOptionsDisableEnable/Disable MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.1.13.1.2 |
wfAtmSVCOptionsCctCircuit Number to which this SVC Options Entry belongs
to. (Instance Id 1)ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.13.1.3 |
wfAtmSVCOptionsIndexSequential index number assigned by configuration tool
(Instance Id 2)ro INTEGER .1.3.6.1.4.1.18.3.4.23.1.13.1.4 |
wfAtmSVCOptionsAdjHostAtmAddrATM Address of the adjacent host to which these SVC config
parameters apply.rw OCTET STRING .1.3.6.1.4.1.18.3.4.23.1.13.1.5 |
wfAtmSVCOptionsXmtPeakCellRateForward Peak Cell Rate (in cells/sec) of the SVC to
this adjacent hostrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.13.1.6 |
wfAtmSVCOptionsXmtSustCellRateForward Sustainable Cell Rate (in cells/sec) of the SVC to
this adjacent hostrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.13.1.7 |
wfAtmSVCOptionsRcvPeakCellRateBackward Peak Cell Rate (in cells/sec) of the SVC to
this adjacent hostrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.13.1.8 |
wfAtmSVCOptionsRcvSustCellRateBackward Sustainable Cell Rate (in cells/sec) of the SVC to
this adjacent hostrw INTEGER .1.3.6.1.4.1.18.3.4.23.1.13.1.9 |
wfAtmSVCOptionsNameUser name for SVC Options Recordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.23.1.13.1.10 |
wfAtmLinkModuleGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.23.2 |
wfAtmAlcDrvTableThis table contains line record entries for each driver
responsible for the management and control of an ATM/ALC interface. SEQUENCE OF WfAtmAlcDrvEntry .1.3.6.1.4.1.18.3.4.23.2.1 |
wfAtmAlcDrvEntryEntry definition. WfAtmAlcDrvEntry .1.3.6.1.4.1.18.3.4.23.2.1.1 |
wfAtmAlcDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.1 |
wfAtmAlcDisableEnable/disable driver parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.2 |
wfAtmAlcStateDriver state parameter. This parameter does not represent the state
of the physical interface!ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.3 |
wfAtmAlcSlotSlot number
::= { wfAtmAlcDrvEntry 4 }
wfAtmAlcPort OBJECT-TYPE
SYNTAX INTEGER {
one(1),
two(2),
three(3),
four(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTIONro INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.5 |
wfAtmAlcCctCircuit number for the driver.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.6 |
wfAtmAlcLineNumberIndex value used to uniquely identify an instance of a physical
ATM port. This index is generally chosen by SiteManager and shall
be used as an instance identifier for ATM MIB objects.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.7 |
wfAtmAlcTypeThe type of interface. This attribute is an alias for 'ifType.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.8 |
wfAtmAlcMtuThe size of the largest packet which can be sent/received on the
interface, specified in octets. This attribute is an alias for
'ifMtu'.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.9 |
wfAtmAlcSpeedAn estimate of the interface's current bandwidth in bits per
second. This attribute is an alias for 'ifSpeed'.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.10 |
wfAtmAlcLastChangeThe time (in hundreths of a second) since the network management
portion of the system was last re-initialized. This attribute is
an alias for 'ifLastChange' in the MIBII System Group.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.4.23.2.1.1.11 |
wfAtmAlcInterfaceStatusMIB-II ifOperStatusro Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.12 |
wfAtmAlcInterfaceIndexMIB-II interface indexro INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.13 |
wfAtmAlcDpNotifyData Path (DP) notify function. This function, when enabled,
will disable the DP interface when the physical interface becomes
non-operational.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.14 |
wfAtmAlcDpNotifyTimeoutData Path (DP) notify function timeout period. This value specifies
the number of seconds to wait before implementing the DP notify
function. A timer will get set to this value when the state of
the physical interface transitions from operational to
non-operational when the DP notify function is enabled.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.15 |
wfAtmAlcConfControlQSizeNumber of command elements in each of the two Host Interface control qsrw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.16 |
wfAtmAlcConfIntqSizeNumber of elements in the Host Interface interrupt queuerw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.17 |
wfAtmAlcConfLogqSizeNumber of elements in the Host Interface log queuerw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.18 |
wfAtmAlcConfNumXmtQueuesNumber of transmit queues in the Host Interface between the Host Driver
and the CoP Driverrw INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.19 |
wfAtmAlcUseDebuggerThis attribute controls a debugger which may be built into the Coprocessor
image. Shipped code does not include this debugger.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.20 |
wfAtmAlcConfXmtClipSlotMaxNumber of frames the slot may queue up for transmit before the Host Driver
begins to clip. Setting this attribute forces the driver to use the non
zero value of the attribute rather than selecting a clip point
automatically.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.21 |
wfAtmAlcXmtClipSlotMaxNumber of buffers per slot beyond which the driver will clip on transmit.
Set by the driver. May be forced by setting
wfAtmAlcConfXmtClipSlotMax != 0ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.22 |
wfAtmAlcConfXmtClipQueueMaxNumber of frames a transmit queue may queue up before the Host Driver
begins to clip. Setting this attribute forces the driver to use the non
zero value of the attribute rather than selecting a clip point
automatically.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.23 |
wfAtmAlcXmtClipQueueMaxNumber of buffers per transmit queue beyond which the driver will clip
on transmit. Set by the driver. May be forced by setting
wfAtmAlcConfXmtClipQueueMax != 0ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.24 |
wfAtmAlcConfXmtClipQueueMinNumber of frames a transmit queue will always be permitted to queue up
regardless of the current value of wfAtmOutQLen relative to
wfAtmXmtClipSlotMax. Setting this attribute forces the driver to
use the nonzero value of the attribute rather than selecting a clip point
automatically.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.25 |
wfAtmAlcXmtClipQueueMinNumber of buffers each transmit queue is guaranteed to get before the
driver clips due to the value of wfAtmXmtClipSlotMax. Set by the
driver. May be forced by setting wfAtmAlcConfXmtClipQueueMin != 0ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.26 |
wfAtmAlcXmtQueueBurstBurst count for all transmit queues in CoP. Specifies the number
of buffer(ettes) the CoP will process from a transmit queue in one
service opportunity. A value of 0 (zero) will cause the CoP to
burst forever (i.e., until either all data is transmitted from the
queue or no more buffer(ette)s are available to transmit into.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.27 |
wfAtmAlcXmtPacketsCount of Service Data Units (SDUs) transmitted without error.ro Counter .1.3.6.1.4.1.18.3.4.23.2.1.1.28 |
wfAtmAlcXmtPacketClipsCount of packets dropped on transmit.ro Counter .1.3.6.1.4.1.18.3.4.23.2.1.1.29 |
wfAtmAlcXmtOctetsCount of octets transmitted without error over the link interface.
These octets are associated with user data only and not overhead or
padding octets.ro Counter .1.3.6.1.4.1.18.3.4.23.2.1.1.30 |
wfAtmAlcOutQLenThis attribute is an alias for 'ifOutQLen' in the MIBII interface
group.ro Gauge .1.3.6.1.4.1.18.3.4.23.2.1.1.31 |
wfAtmAlcRcvPacketsCount of Service Data Units (SDUs) received without error.ro Counter .1.3.6.1.4.1.18.3.4.23.2.1.1.32 |
wfAtmAlcRcvReplenMissesNumber of packet buffer misses while attempting to replenish driver
receive ring.ro Counter .1.3.6.1.4.1.18.3.4.23.2.1.1.33 |
wfAtmAlcConfRcvBuffersMaxNumber of buffers the driver will try to maintain on its receive queue.
Setting this attribute forces the driver to use the non
zero value of the attribute rather than selecting a buffer count
automatically.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.34 |
wfAtmAlcRcvBuffersMaxNumber of buffers which the driver will attempt to maintain on the receive
queue. Set by the driver. May be forced by setting
wfAtmAlcConfRcvBuffersMax != 0ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.35 |
wfAtmAlcMadrCtNumber of PROM-based MAC addresses.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.1.1.36 |
wfAtmAlcMadrFirst MAC address in canonical format (i.e., 00-00-a2...). The number of
subsequent MAC addresses is specified by wfAtmAlcMadrCt which are
sequential.ro OCTET STRING .1.3.6.1.4.1.18.3.4.23.2.1.1.37 |
wfAtmAlcVcInactEnableInactivity timeout function. When this function is enabled, all activated
VCs will be polled, at an interval specified by wfAtmAlcCopVcInactTimeout,
for inactivity.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.1.1.38 |
wfAtmAlcXmtBadVcsCount of packets dropped on transmit because of an invalid VPI/VCI.ro Counter .1.3.6.1.4.1.18.3.4.23.2.1.1.39 |
wfAtmAlcXmtqTableObject created by the Host Driver, one for each transmit queue SEQUENCE OF WfAtmAlcXmtqEntry .1.3.6.1.4.1.18.3.4.23.2.2 |
wfAtmAlcXmtqEntryAn entry in the ATM Transmit Queue Table WfAtmAlcXmtqEntry .1.3.6.1.4.1.18.3.4.23.2.2.1 |
wfAtmAlcXmtqIndexUniquely identifies the interface (port) that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.2.1.1 |
wfAtmAlcXmtqNumberIdentifies a particular instance of a transmit queue.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.2.1.2 |
wfAtmAlcXmtqStateState of the transmit queue.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.2.1.3 |
wfAtmAlcXmtqStickyMaskro INTEGER .1.3.6.1.4.1.18.3.4.23.2.2.1.4 |
wfAtmAlcXmtqVcsNumber of Virtual Connections (VCs) configured for this queue.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.2.1.5 |
wfAtmAlcXmtqOutQLenro Gauge .1.3.6.1.4.1.18.3.4.23.2.2.1.6 |
wfAtmAlcXmtqOctetsro Counter .1.3.6.1.4.1.18.3.4.23.2.2.1.7 |
wfAtmAlcXmtqPacketsro Counter .1.3.6.1.4.1.18.3.4.23.2.2.1.8 |
wfAtmAlcXmtqPacketClipsro Counter .1.3.6.1.4.1.18.3.4.23.2.2.1.9 |
wfAtmAlcCopConfTableThis table contains basic CONFIGURATION information for the
ATM/ALC CoProcessor (CoP) environment. SEQUENCE OF WfAtmAlcCopConfEntry .1.3.6.1.4.1.18.3.4.23.2.3 |
wfAtmAlcCopConfEntryEntry definition. WfAtmAlcCopConfEntry .1.3.6.1.4.1.18.3.4.23.2.3.1 |
wfAtmAlcCopConfDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.3.1.1 |
wfAtmAlcCopConfIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.3.1.2 |
wfAtmAlcCopBufSizeSize in bytes of buffer(ettes).rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.3.1.3 |
wfAtmAlcCopConfXmtBufsPercentage of transmit buffers to allocate in relation to
the total packet memory size.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.3.1.4 |
wfAtmAlcCopConfRcvBufsPercentage of receive buffers to allocate in relation to
the total packet memory size.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.3.1.5 |
wfAtmAlcCopDmaHighWatermarkDMA FIFO high watermark. This value determines the mark upon which
the DMA controller will generate an interrupt specifying FIFO
'almost full'.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.3.1.6 |
wfAtmAlcCopDmaLowWatermarkDMA FIFO low watermark. This value determines the mark upon which
the DMA controller will generate an interrupt specifying FIFO
'almost empty'.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.3.1.7 |
wfAtmAlcCopCacheControlDetermines the state of the cache control register in the CoP.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.3.1.8 |
wfAtmAlcCopHwModIdLink module hardware identifier. Includes physical interface type.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.3.1.9 |
wfAtmAlcCopVcInactTimeoutInactivity timeout value for all VCs on this interface in seconds.
If no cells have been transmitted or received on an VC over the given
timeout period then the VC will be closed.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.3.1.10 |
wfAtmAlcCopHwTableThis table contains hardware information relating to the ATM/ALC
link module. SEQUENCE OF WfAtmAlcCopHwEntry .1.3.6.1.4.1.18.3.4.23.2.4 |
wfAtmAlcCopHwEntryEntry definition. WfAtmAlcCopHwEntry .1.3.6.1.4.1.18.3.4.23.2.4.1 |
wfAtmAlcCopHwIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.4.1.1 |
wfAtmAlcCopTypeCoProcessor type.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.4.1.2 |
wfAtmAlcCopPktMemSizeSize, in octets, of packet memory on the link module.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.4.1.3 |
wfAtmAlcCopCtlMemSizeSize, in octets, of control memory on the link module.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.4.1.4 |
wfAtmAlcCopInsMemSizeSize, in octets, of module memory on the link module.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.4.1.5 |
wfAtmAlcCopAlcClockSpeedClock speed of the Adaptation Layer Controller (ALC) device.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.4.1.6 |
wfAtmAlcCopAlcVersionRevision of the Adaptation Layer Controller (ALC) device.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.4.1.7 |
wfAtmAlcCopNtcVersionRevision of the Network Termination Controller (NTC) device.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.4.1.8 |
wfAtmAlcCopAtcVersionRevision of the Address Translation Controller (ATC) device.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.4.1.9 |
wfAtmAlcCopInfoTableThis table contains general CoP information. SEQUENCE OF WfAtmAlcCopInfoEntry .1.3.6.1.4.1.18.3.4.23.2.5 |
wfAtmAlcCopInfoEntryEntry definition. WfAtmAlcCopInfoEntry .1.3.6.1.4.1.18.3.4.23.2.5.1 |
wfAtmAlcCopInfoIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.5.1.1 |
wfAtmAlcCopStateState of the CoP driver.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.5.1.2 |
wfAtmAlcCopConfigStateState of the configuration process. The CoP driver performs
a series of configuration events for all the major components
on the link module. This state show where in the configuration
process the CoP driver resides. Until done, no data will be
allowed to be transmitted or received.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.5.1.3 |
wfAtmAlcCopTotalBufsTotal number of buffers available for use in packet memory.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.5.1.4 |
wfAtmAlcCopTotalXmtBufsNumber of buffers allocated for transmit.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.5.1.5 |
wfAtmAlcCopTotalRcvBufsNumber of buffers allocated for receive.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.5.1.6 |
wfAtmAlcCopDataPathTableThis table contains CoP data path statistics such as the number of
packets, buffers, and cells transmitted and received. SEQUENCE OF WfAtmAlcCopDataPathEntry .1.3.6.1.4.1.18.3.4.23.2.6 |
wfAtmAlcCopDataPathEntryEntry definition. WfAtmAlcCopDataPathEntry .1.3.6.1.4.1.18.3.4.23.2.6.1 |
wfAtmAlcCopDataPathIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.6.1.1 |
wfAtmAlcCopXmtPacketsTotal number of packets transferred to the link module.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.2 |
wfAtmAlcCopXmtBuffersTotal number of CoP buffers used for segmentation (transmit).ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.3 |
wfAtmAlcCopXmtErrBuffersTotal number of CoP transmit buffers returned in error by SAR
device.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.4 |
wfAtmAlcCopXmtCellsTotal number of assigned ATM layer cells transmitted at the
transceiver transmit interface (T-count). This attribute is
a 64-bit counter.ro OCTET STRING .1.3.6.1.4.1.18.3.4.23.2.6.1.5 |
wfAtmAlcCopXmtUnassCellsro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.6 |
wfAtmAlcCopXmtIdleCellsro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.7 |
wfAtmAlcCopXmtUserCellsro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.8 |
wfAtmAlcCopXmtOctetsCount of octets transmitted (segmented) successfully.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.9 |
wfAtmAlcCopRcvPacketsTotal number of packets completely reassembled.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.10 |
wfAtmAlcCopRcvClipPacketsTotal number of packets dropped because no host buffers available
to hold the incoming data.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.11 |
wfAtmAlcCopRcvBuffersTotal number of CoP buffers used for reassembly.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.12 |
wfAtmAlcCopRcvErrBuffersTotal number of CoP receive buffers returned in error by SAR
device.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.13 |
wfAtmAlcCopRcvClipBuffersTotal number of CoP buffers dropped because no receive buffer space
were available to hold the incoming data.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.14 |
wfAtmAlcCopRcvSarDropBuffersTotal number of CoP buffers dropped by the SAR device.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.15 |
wfAtmAlcCopRcvCellsTotal number of assigned ATM layer cells received at the
transciever receive interface that have not been discarded
(R-count). This attribute is a 64-bit counter.ro OCTET STRING .1.3.6.1.4.1.18.3.4.23.2.6.1.16 |
wfAtmAlcCopRcvDropCellsTotal number of cells received at the transceiver receive interface
that have been discarded (D-count).
The cells may have been discarded due to the following reasons:
physical layer cells
ATM layer cell with uncorrectable HEC error
ATM layer cell which has been discarded via the discard mask
protocol errorro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.17 |
wfAtmAlcCopRcvUnassCellsro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.18 |
wfAtmAlcCopRcvIdleCellsro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.19 |
wfAtmAlcCopRcvUserCellsro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.20 |
wfAtmAlcCopRcvSarDropCellsro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.21 |
wfAtmAlcCopRcvOctetsCount of octets received (reassembled) successfully.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.22 |
wfAtmAlcCopXmtOamCellsCount of OAM cells transmitted successfully.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.23 |
wfAtmAlcCopRcvOamCellsCount of OAM cells received successfully.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.24 |
wfAtmAlcCopRcvOamCrcErrsCount of OAM cells received with CRC10 error.ro Counter .1.3.6.1.4.1.18.3.4.23.2.6.1.25 |
wfAtmAlcCopErrorTableThis table contains CoP error statistics. SEQUENCE OF WfAtmAlcCopErrorEntry .1.3.6.1.4.1.18.3.4.23.2.7 |
wfAtmAlcCopErrorEntryEntry definition. WfAtmAlcCopErrorEntry .1.3.6.1.4.1.18.3.4.23.2.7.1 |
wfAtmAlcCopErrorIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.7.1.1 |
wfAtmAlcCopHecDetectsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.2 |
wfAtmAlcCopHecCorrectsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.3 |
wfAtmAlcCopB2Febesro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.4 |
wfAtmAlcCopB3Febesro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.5 |
wfAtmAlcCopF1Febesro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.6 |
wfAtmAlcCopF3Febesro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.7 |
wfAtmAlcCopG1Febesro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.8 |
wfAtmAlcCopDropIntqEventsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.9 |
wfAtmAlcCopDropLogqEventsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.10 |
wfAtmAlcCopDmaFifoOverrunsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.11 |
wfAtmAlcCopDmaFifoUnderrunsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.12 |
wfAtmAlcCopLossSignalsNumber of occurences of when the framer device detected loss
of signal (i.e., no signal detect/no light).ro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.13 |
wfAtmAlcCopLossFramesro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.14 |
wfAtmAlcCopLossPointersro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.15 |
wfAtmAlcCopOutCellDelinsNumber of occurences of when the framer device went out of
cell delineation.ro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.16 |
wfAtmAlcCopInCellDelinsNumber of occurences of when the framer device went into
cell delineation.ro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.17 |
wfAtmAlcCopBufOverflowsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.18 |
wfAtmAlcCopXmtQueueFullsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.19 |
wfAtmAlcCopXmtAtesro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.20 |
wfAtmAlcCopRcvQueueEmptysro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.21 |
wfAtmAlcCopRcvWriteFailsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.22 |
wfAtmAlcCopRcvQueueFullsro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.23 |
wfAtmAlcCopRcvAtesro Counter .1.3.6.1.4.1.18.3.4.23.2.7.1.24 |
wfAtmAlcSarConfTableThis table contains configuration information for the
ATM/ALC SAR device. SEQUENCE OF WfAtmAlcSarConfEntry .1.3.6.1.4.1.18.3.4.23.2.8 |
wfAtmAlcSarConfEntryEntry definition. WfAtmAlcSarConfEntry .1.3.6.1.4.1.18.3.4.23.2.8.1 |
wfAtmAlcSarConfDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.1 |
wfAtmAlcSarConfIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.8.1.2 |
wfAtmAlcSarDmaBurstLengthLimits the max number of SAR DMA access cycles in a
single block.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.8.1.3 |
wfAtmAlcSarDmaModeBwSAR memory interface width.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.4 |
wfAtmAlcSarDmaModeBmodeSAR memory control signal mode.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.5 |
wfAtmAlcSarDmaModeOrderSAR memory byte ordering convention.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.6 |
wfAtmAlcSarDmaModeMmodeSAR memory mode.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.7 |
wfAtmAlcSarDmaModeCmodeSAR memory cycle time.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.8 |
wfAtmAlcSarDmaModeSyncREADY/DTACK signal treatment.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.9 |
wfAtmAlcSarControlRifReceive buffer ready interrupt frequency.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.10 |
wfAtmAlcSarControlLoopLoop transmit cell stream into receive cell stream interface.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.11 |
wfAtmAlcSarModeRtmrReceive routing tag length.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.12 |
wfAtmAlcSarModeRidReassembly ID select.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.13 |
wfAtmAlcSarModeAalDefault receive status/descriptor type field setting.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.14 |
wfAtmAlcSarModeDmaskDisable transmit queue masking.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.15 |
wfAtmAlcSarModeDchainTransmit cell stream daisy chain enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.16 |
wfAtmAlcSarModeSmodeReceive streaming mode enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.17 |
wfAtmAlcSarModeBchainReceive buffer chaining mode enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.18 |
wfAtmAlcSarModeHecHeader error check operation.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.19 |
wfAtmAlcSarModeVpfVirtual path filter enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.20 |
wfAtmAlcSarModeBasBuffer ageing support.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.21 |
wfAtmAlcSarModeAmTraffic rate averaging method.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.22 |
wfAtmAlcSarModeTrtlTransmit routing tag length.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.23 |
wfAtmAlcSarTimeoutCtrPeriodNumber of DCCK clock periods required to increment the
receive buffer ageing time base counter.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.8.1.24 |
wfAtmAlcSarTimeoutCtrIntMaximum time period allowed between the arrival of an
incoming packet and the host servicing the receive buffer.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.8.1.25 |
wfAtmAlcSarMaxReceivePktLenMaximum number of bytes of incoming packet data that can
be received.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.8.1.26 |
wfAtmAlcSarTrafficMgtTableThis table contains information relating to the traffic
management controller in the ATM/ALC SAR device. SEQUENCE OF WfAtmAlcSarTrafficMgtEntry .1.3.6.1.4.1.18.3.4.23.2.9 |
wfAtmAlcSarTrafficMgtEntryEntry definition. WfAtmAlcSarTrafficMgtEntry .1.3.6.1.4.1.18.3.4.23.2.9.1 |
wfAtmAlcSarTrafficMgtDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.9.1.1 |
wfAtmAlcSarTrafficMgtIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.9.1.2 |
wfAtmAlcSarPeakCellRateEnaEnable counter for SAR peak transmission rate.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.9.1.3 |
wfAtmAlcSarAvgCellRateEnaEnable counter for SAR average trasnmission rate.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.9.1.4 |
wfAtmAlcSarPeakCellRateDesired value for SAR total peak cell rate (cells/second).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.9.1.5 |
wfAtmAlcSarAvgCellRateDesired value for SAR total average cell rate (cells/second).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.9.1.6 |
wfAtmAlcSarMaxBurstSizeDesired value for SAR maximum burst size (cells).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.9.1.7 |
wfAtmAlcSarRateQueueTableThis table contains information relating to the peak rate
queues provided by the ATM/ALC SAR device. SEQUENCE OF WfAtmAlcSarRateQueueEntry .1.3.6.1.4.1.18.3.4.23.2.10 |
wfAtmAlcSarRateQueueEntryEntry definition. WfAtmAlcSarRateQueueEntry .1.3.6.1.4.1.18.3.4.23.2.10.1 |
wfAtmAlcSarRateQueueIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.10.1.1 |
wfAtmAlcSarRateQueueNumberIdentifies a particular instance of a rate queue.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.10.1.2 |
wfAtmAlcSarRateQueueStateRate queue state parameter: enabled or disabled.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.10.1.3 |
wfAtmAlcSarRateQueuePcrPeak Cell Rate (PCR) of rate queue defined in bits per second.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.10.1.4 |
wfAtmAlcSarRateQueueVcsNumber of Virtual Connections (VCs) configured for this queue.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.10.1.5 |
wfAtmAlcSarRateQueueDefIndicates the method by which this queue was defined: IMPLICIT means
that the driver defined the queue when a VC was added; EXPLICIT means
that the queue was explicitly defined by an entity other than the driver.ro Enumeration .1.3.6.1.4.1.18.3.4.23.2.10.1.6 |
wfAtmAlcFrmConfTableThis table contains configuration information for the
ATM/ALC FRAMER device. SEQUENCE OF WfAtmAlcFrmConfEntry .1.3.6.1.4.1.18.3.4.23.2.11 |
wfAtmAlcFrmConfEntryEntry definition. WfAtmAlcFrmConfEntry .1.3.6.1.4.1.18.3.4.23.2.11.1 |
wfAtmAlcFrmConfDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.1 |
wfAtmAlcFrmConfIndexUniquely identifies the interface that contains the
appropriate management information.ro INTEGER .1.3.6.1.4.1.18.3.4.23.2.11.1.2 |
wfAtmAlcFrmGenEnableRx/Tx framer enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.3 |
wfAtmAlcFrmGenFramingModeFraming (transceiver) mode.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.4 |
wfAtmAlcFrmGenScramblerEna1+x(6)+x(7) frame scrambler. Only applies to
framing standards such as SONET/SDH.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.5 |
wfAtmAlcFrmGenDescrambleEna1+x(6)+x(7) frame descrambler. Only applies to
framing standards such as SONET/SDH.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.6 |
wfAtmAlcFrmGenLoopbackTransmit to receive framer loopback.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.7 |
wfAtmAlcFrmGenSyncFoundCntFrame sync found count.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.11.1.8 |
wfAtmAlcFrmGenSyncLostCntFrame sync lost count.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.11.1.9 |
wfAtmAlcFrmRcvCellEnableCell receiver enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.10 |
wfAtmAlcFrmRcvOamCrcCheckOAM cell CRC check.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.11 |
wfAtmAlcFrmRcvOamCrcGenOAM cell CRC generate.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.12 |
wfAtmAlcFrmRcvCellInsPrioCell insert priority.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.13 |
wfAtmAlcFrmRcvInsertPcrPeak cell insertion rate.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.14 |
wfAtmAlcFrmRcvGfcIgnoreGFC field ignore.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.15 |
wfAtmAlcFrmRcvDescrambleCtlDescramble control. Only applies to framing standards
such as SONET/SDH.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.16 |
wfAtmAlcFrmRcvHecRcvMaskHEC receive mask.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.17 |
wfAtmAlcFrmRcvErrCorrectEnaError correction enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.18 |
wfAtmAlcFrmRcvByteAlignmentByte alignment.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.19 |
wfAtmAlcFrmRcvCellSyncFoundCell sync found count.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.11.1.20 |
wfAtmAlcFrmRcvCellSyncLostCell sync lost count.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.11.1.21 |
wfAtmAlcFrmRcvExtUserCellExtract user defined cell.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.22 |
wfAtmAlcFrmRcvExtMetaSigExtract meta signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.23 |
wfAtmAlcFrmRcvExtBcastSigExtract broadcast signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.24 |
wfAtmAlcFrmRcvExtPointSigExtract point-point signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.25 |
wfAtmAlcFrmRcvExtIlmiSigExtract ILMI signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.26 |
wfAtmAlcFrmRcvExtF4F5PrfManExtract F4/F5 performance man.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.27 |
wfAtmAlcFrmRcvExtF1F3PlOamExtract F1/F3 PL-OAM.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.28 |
wfAtmAlcFrmRcvExtF4SegmentExtract F4 segment (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.29 |
wfAtmAlcFrmRcvExtF4EndEndExtract F4 end-end (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.30 |
wfAtmAlcFrmRcvExtF5SegmentExtract F5 segment (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.31 |
wfAtmAlcFrmRcvExtF5EndEndExtract F5 end-end (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.32 |
wfAtmAlcFrmRcvDisUserCellDiscard user defined cell.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.33 |
wfAtmAlcFrmRcvDisMetaSigDiscard meta signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.34 |
wfAtmAlcFrmRcvDisBcastSigDiscard broadcast signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.35 |
wfAtmAlcFrmRcvDisPointSigDiscard point-point signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.36 |
wfAtmAlcFrmRcvDisIlmiSigDiscard ILMI signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.37 |
wfAtmAlcFrmRcvDisUnassCellDiscard unassigned cell.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.38 |
wfAtmAlcFrmRcvDisF4SegmentDiscard F4 segment (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.39 |
wfAtmAlcFrmRcvDisF4EndEndDiscard F4 end-end (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.40 |
wfAtmAlcFrmRcvDisF5SegmentDiscard F5 segment (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.41 |
wfAtmAlcFrmRcvDisF5EndEndDiscard F5 end-end (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.42 |
wfAtmAlcFrmXmtCellEnableCell transmitter enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.43 |
wfAtmAlcFrmXmtOamCrcCheckOAM cell CRC check.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.44 |
wfAtmAlcFrmXmtOamCrcGenOAM cell CRC generate.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.45 |
wfAtmAlcFrmXmtCellInsPrioCell insert priority.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.46 |
wfAtmAlcFrmXmtInsertPcrPeak cell insertion rate.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.47 |
wfAtmAlcFrmXmtGfcIgnoreGFC field ignore.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.48 |
wfAtmAlcFrmXmtCellDecoupleCell rate decoupling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.49 |
wfAtmAlcFrmXmtScrambleCtlScramble control. Only applies to framing standards
such as SONET/SDH.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.50 |
wfAtmAlcFrmXmtHecXmtMaskHEC transmit mask.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.51 |
wfAtmAlcFrmXmtExtUserCellExtract user defined cell.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.52 |
wfAtmAlcFrmXmtExtMetaSigExtract meta signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.53 |
wfAtmAlcFrmXmtExtBcastSigExtract broadcast signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.54 |
wfAtmAlcFrmXmtExtPointSigExtract point-point signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.55 |
wfAtmAlcFrmXmtExtIlmiSigExtract ILMI signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.56 |
wfAtmAlcFrmXmtExtF4F5PrfManExtract F4/F5 performance man.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.57 |
wfAtmAlcFrmXmtExtF4SegmentExtract F4 segment (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.58 |
wfAtmAlcFrmXmtExtF4EndEndExtract F4 end-end (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.59 |
wfAtmAlcFrmXmtExtF5SegmentExtract F5 segment (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.60 |
wfAtmAlcFrmXmtExtF5EndEndExtract F5 end-end (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.61 |
wfAtmAlcFrmXmtDisUserCellDiscard user defined cell.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.62 |
wfAtmAlcFrmXmtDisMetaSigDiscard meta signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.63 |
wfAtmAlcFrmXmtDisBcastSigDiscard broadcast signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.64 |
wfAtmAlcFrmXmtDisPointSigDiscard point-point signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.65 |
wfAtmAlcFrmXmtDisIlmiSigDiscard ILMI signalling.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.66 |
wfAtmAlcFrmXmtDisUnassCellDiscard unassigned cell.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.67 |
wfAtmAlcFrmXmtDisF4SegmentDiscard F4 segment (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.68 |
wfAtmAlcFrmXmtDisF4EndEndDiscard F4 end-end (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.69 |
wfAtmAlcFrmXmtDisF5SegmentDiscard F5 segment (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.70 |
wfAtmAlcFrmXmtDisF5EndEndDiscard F5 end-end (FM and AD).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.71 |
wfAtmAlcFrmOamEnableOAM controller enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.72 |
wfAtmAlcFrmOamInvertBipInvert BIP.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.73 |
wfAtmAlcFrmOamTxPathFerfTx path FERF.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.74 |
wfAtmAlcFrmOamTxSectionFerfTx section FERF.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.75 |
wfAtmAlcFrmOamTxPathAisTx path AIS.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.76 |
wfAtmAlcFrmOamTxSectionAisTx section AIS.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.77 |
wfAtmAlcFrmOamTxPathFebeTx path FEBE (B3).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.78 |
wfAtmAlcFrmOamTxSectionFebeTx section FEBE (B3).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.79 |
wfAtmAlcFrmStatsSwEnableSwitch statistics handler.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.80 |
wfAtmAlcFrmStatsModeStatistics controller mode.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.81 |
wfAtmAlcFrmStatsReceiveReceive user statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.82 |
wfAtmAlcFrmStatsTransmitTransmit statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.83 |
wfAtmAlcFrmStatsMaskVP/VC filter mask.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.84 |
wfAtmAlcFrmStatsTimeoutStatistics DMA transfer timeout.rw INTEGER .1.3.6.1.4.1.18.3.4.23.2.11.1.85 |
wfAtmAlcFrmStatsTimerEnaTimer enable (DMA).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.86 |
wfAtmAlcFrmStatsOflowEnaOverflow enable (DMA).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.87 |
wfAtmAlcFrmStatsForceDmaForce DMA transfer.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.88 |
wfAtmAlcFrmCsiEnableCell stream enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.89 |
wfAtmAlcFrmCsiLoopCSI rx/tx loopback.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.90 |
wfAtmAlcFrmCsiRcvAtcEnableReceive ATC enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.91 |
wfAtmAlcFrmCsiRcvAteAddress translation error (receive).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.92 |
wfAtmAlcFrmCsiRcvClpBitOptCLP bit option (receive).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.93 |
wfAtmAlcFrmCsiRcvCongBitOptPLT congestion bit option (receive).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.94 |
wfAtmAlcFrmCsiRoutingTagRouting tag byte size.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.95 |
wfAtmAlcFrmCsiXmtAtcEnableTransmit ATC enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.96 |
wfAtmAlcFrmCsiXmtAteAddress translation error (transmit).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.97 |
wfAtmAlcFrmCsiXmtClpBitOptCLP bit option (transmit).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.98 |
wfAtmAlcFrmCsiXmtCongBitOptPLT congestion bit option (transmit).rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.99 |
wfAtmAlcFrmCsiOmitHecOmit HEC byte on transmit.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.100 |
wfAtmAlcFrmCsiRcvHecEnableHEC generator enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.101 |
wfAtmAlcFrmCsiRcvHecMaskASCI rx path HEC mask.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.102 |
wfAtmAlcFrmDmaChan0EnableDMA channel 0 enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.103 |
wfAtmAlcFrmDmaChan1EnableDMA channel 1 enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.104 |
wfAtmAlcFrmDmaChan2EnableDMA channel 2 enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.105 |
wfAtmAlcFrmDmaChan3EnableDMA channel 3 enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.106 |
wfAtmAlcFrmDmaChan4EnableDMA channel 4 enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.107 |
wfAtmAlcFrmDmaChan5EnableDMA channel 5 enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.108 |
wfAtmAlcFrmDmaEnableDMA controller enable.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.109 |
wfAtmAlcFrmDmaStopDMA stop.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.110 |
wfAtmAlcFrmDmaPrioritySelPriority select.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.111 |
wfAtmAlcFrmDmaFastXferModeFast transfer mode.rw Enumeration .1.3.6.1.4.1.18.3.4.23.2.11.1.112 |
wfAtmCellSwitchGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.4.23.3 |
wfAtmizerCfgTableARE ATMizer Configuration Record SEQUENCE OF WfAtmizerCfgEntry .1.3.6.1.4.1.18.3.4.23.3.1 |
wfAtmizerCfgEntryInformation about a Transmit/Receive pair of ATMizers WfAtmizerCfgEntry .1.3.6.1.4.1.18.3.4.23.3.1.1 |
wfSonetMediumTableStatistics for the SONET medium table SEQUENCE OF WfSonetMediumEntry .1.3.6.1.4.1.18.3.4.24.1 |
wfSonetMediumEntryAn entry in the medium table WfSonetMediumEntry .1.3.6.1.4.1.18.3.4.24.1.1 |
wfSonetMediumIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.1.1.1 |
wfSonetMediumTypeThis variable identifies whether a SONET or a SDH signal is used
across this interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.1.1.2 |
wfSonetMediumTimeElapsedThe number of seconds that have elapsed since the beginning of
the current error-measurement period.ro INTEGER .1.3.6.1.4.1.18.3.4.24.1.1.3 |
wfSonetMediumValidIntervalsThe number of previous intervals for which valid data has been stored.ro INTEGER .1.3.6.1.4.1.18.3.4.24.1.1.4 |
wfSonetMediumLineCodingThis variable describes the line coding for this interface.ro Enumeration .1.3.6.1.4.1.18.3.4.24.1.1.5 |
wfSonetMediumLineTypeThis variable describes the line type for this interface.ro Enumeration .1.3.6.1.4.1.18.3.4.24.1.1.6 |
wfSonetMediumCircuitIdentifierThis variable contains the transmission vendor's circuit identifier.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.24.1.1.7 |
wfSonetSectionCurrentTableStatistics for the SONET section current table SEQUENCE OF WfSonetSectionCurrentEntry .1.3.6.1.4.1.18.3.4.24.2 |
wfSonetSectionCurrentEntryAn entry in the Section current table WfSonetSectionCurrentEntry .1.3.6.1.4.1.18.3.4.24.2.1 |
wfSonetSectionCurrentIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.2.1.1 |
wfSonetSectionCurrentStatusThis variable is a bitmask indicating the status of the interface.ro Enumeration .1.3.6.1.4.1.18.3.4.24.2.1.2 |
wfSonetSectionCurrentESsThe counter associated with the number of Errored Seconds encountered
by a SONET/SDH Section in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.2.1.3 |
wfSonetSectionCurrentSESsThe counter associated with the number of Severely Errored Seconds
encountered by a SONET/SDH Section in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.2.1.4 |
wfSonetSectionCurrentSEFSsThe counter associated with the number of Severely Errored Framing Seconds
encountered by a SONET/SDH Section in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.2.1.5 |
wfSonetSectionCurrentCVsThe counter associated with the number of Coding Violations encountered
by a SONET/SDH Section in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.2.1.6 |
wfSonetSectionIntervalTableStatistics for the SONET section interval table SEQUENCE OF WfSonetSectionIntervalEntry .1.3.6.1.4.1.18.3.4.24.3 |
wfSonetSectionIntervalEntryAn entry in the Section Interval table WfSonetSectionIntervalEntry .1.3.6.1.4.1.18.3.4.24.3.1 |
wfSonetSectionIntervalIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.3.1.1 |
wfSonetSectionIntervalNumberA number between 1 and 96, which identifies the interval for which the
set of statistics is available. The interval identified by 1 is the
most recently completed 15 minute interval, and the interval identified
by N is the interval immediately preceding the one identified by N-1.ro INTEGER .1.3.6.1.4.1.18.3.4.24.3.1.2 |
wfSonetSectionIntervalESsThe counter associated with the number of Errored Seconds encountered
by a SONET/SDH Section in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.3.1.3 |
wfSonetSectionIntervalSESsThe counter associated with the number of Severely Errored Seconds
encountered by a SONET/SDH Section in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.3.1.4 |
wfSonetSectionIntervalSEFSsThe counter associated with the number of Severely Errored Framing Seconds
encountered by a SONET/SDH Section in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.3.1.5 |
wfSonetSectionIntervalCVsThe counter associated with the number of Coding Violations encountered
by a SONET/SDH Section in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.3.1.6 |
wfSonetLineCurrentTableStatistics for the SONET line current table SEQUENCE OF WfSonetLineCurrentEntry .1.3.6.1.4.1.18.3.4.24.4 |
wfSonetLineCurrentEntryAn entry in the Line current table WfSonetLineCurrentEntry .1.3.6.1.4.1.18.3.4.24.4.1 |
wfSonetLineCurrentIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.4.1.1 |
wfSonetLineCurrentStatusThis variable is a bitmask indicating the status of the interface.ro Enumeration .1.3.6.1.4.1.18.3.4.24.4.1.2 |
wfSonetLineCurrentESsThe counter associated with the number of Errored Seconds encountered
by a SONET/SDH Line in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.4.1.3 |
wfSonetLineCurrentSESsThe counter associated with the number of Severely Errored Seconds
encountered by a SONET/SDH Line in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.4.1.4 |
wfSonetLineCurrentCVsThe counter associated with the number of Coding Violations encountered
by a SONET/SDH Line in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.4.1.5 |
wfSonetLineCurrentUASsThe counter associated with the number of Unavailable Seconds encountered
by a SONET/SDH Line in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.4.1.6 |
wfSonetLineIntervalTableStatistics for the SONET line interval table SEQUENCE OF WfSonetLineIntervalEntry .1.3.6.1.4.1.18.3.4.24.5 |
wfSonetLineIntervalEntryAn entry in the Line Interval table WfSonetLineIntervalEntry .1.3.6.1.4.1.18.3.4.24.5.1 |
wfSonetLineIntervalIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.5.1.1 |
wfSonetLineIntervalNumberA number between 1 and 96, which identifies the interval for which the
set of statistics is available. The interval identified by 1 is the
most recently completed 15 minute interval, and the interval identified
by N is the interval immediately preceding the one identified by N-1.ro INTEGER .1.3.6.1.4.1.18.3.4.24.5.1.2 |
wfSonetLineIntervalESsThe counter associated with the number of Errored Seconds encountered
by a SONET/SDH Line in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.5.1.3 |
wfSonetLineIntervalSESsThe counter associated with the number of Severely Errored Seconds
encountered by a SONET/SDH Line in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.5.1.4 |
wfSonetLineIntervalCVsThe counter associated with the number of Coding Violations encountered
by a SONET/SDH Line in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.5.1.5 |
wfSonetLineIntervalUASsThe counter associated with the number of Unavailable Seconds encountered
by a SONET/SDH Line in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.5.1.6 |
wfSonetFarEndLineCurrentTableStatistics for the SONET far end line current table SEQUENCE OF WfSonetFarEndLineCurrentEntry .1.3.6.1.4.1.18.3.4.24.6 |
wfSonetFarEndLineCurrentEntryAn entry in the FarEndLine current table WfSonetFarEndLineCurrentEntry .1.3.6.1.4.1.18.3.4.24.6.1 |
wfSonetFarEndLineCurrentIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.6.1.1 |
wfSonetFarEndLineCurrentESsThe counter associated with the number of Far End Errored Seconds
encountered by a SONET/SDH Medium/Section/Line in the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.6.1.2 |
wfSonetFarEndLineCurrentSESsThe counter associated with the number of Far End Severely Errored Seconds
encountered by a SONET/SDH Medium/Section/Line in the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.6.1.3 |
wfSonetFarEndLineCurrentCVsThe counter associated with the number of Far End Coding Violations
encountered by a SONET/SDH Medium/Section/Line in the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.6.1.4 |
wfSonetFarEndLineCurrentUASsThe counter associated with the number of Far End Unavailable Seconds
encountered by a SONET/SDH Medium/Section/Line in the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.6.1.5 |
wfSonetFarEndLineIntervalTableStatistics for the SONET far end line interval table SEQUENCE OF WfSonetFarEndLineIntervalEntry .1.3.6.1.4.1.18.3.4.24.7 |
wfSonetFarEndLineIntervalEntryAn entry in the FarEndLine Interval table WfSonetFarEndLineIntervalEntry .1.3.6.1.4.1.18.3.4.24.7.1 |
wfSonetFarEndLineIntervalIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.7.1.1 |
wfSonetFarEndLineIntervalNumberA number between 1 and 96, which identifies the interval for which the
set of statistics is available. The interval identified by 1 is the
most recently completed 15 minute interval, and the interval identified
by N is the interval immediately preceding the one identified by N-1.ro INTEGER .1.3.6.1.4.1.18.3.4.24.7.1.2 |
wfSonetFarEndLineIntervalESsThe counter associated with the number of Far End Errored Seconds
encountered by a SONET/SDH Medium/Section/Line in the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.7.1.3 |
wfSonetFarEndLineIntervalSESsThe counter associated with the number of Far End Severely Errored Seconds
encountered by a SONET/SDH Medium/Section/Line in the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.7.1.4 |
wfSonetFarEndLineIntervalCVsThe counter associated with the number of Far End Coding Violations
encountered by a SONET/SDH Medium/Section/Line in the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.7.1.5 |
wfSonetFarEndLineIntervalUASsThe counter associated with the number of Far End Unavailable Seconds
encountered by a SONET/SDH Medium/Section/Line in the current 15 minute
interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.7.1.6 |
wfSonetPathCurrentTableStatistics for the SONET path current table SEQUENCE OF WfSonetPathCurrentEntry .1.3.6.1.4.1.18.3.4.24.8 |
wfSonetPathCurrentEntryAn entry in the Path current table WfSonetPathCurrentEntry .1.3.6.1.4.1.18.3.4.24.8.1 |
wfSonetPathCurrentIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.8.1.1 |
wfSonetPathCurrentWidthA value that indicates the type of the SONET/SDH Path.ro Enumeration .1.3.6.1.4.1.18.3.4.24.8.1.2 |
wfSonetPathCurrentStatusThis variable is a bitmask indicating the status of the interface.ro Enumeration .1.3.6.1.4.1.18.3.4.24.8.1.3 |
wfSonetPathCurrentESsThe counter associated with the number of Errored Seconds encountered
by a SONET/SDH Path in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.8.1.4 |
wfSonetPathCurrentSESsThe counter associated with the number of Severely Errored Seconds
encountered by a SONET/SDH Path in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.8.1.5 |
wfSonetPathCurrentCVsThe counter associated with the number of Coding Violations encountered
by a SONET/SDH Path in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.8.1.6 |
wfSonetPathCurrentUASsThe counter associated with the number of Unavailable Seconds encountered
by a SONET/SDH Path in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.8.1.7 |
wfSonetPathIntervalTableStatistics for the SONET path interval table SEQUENCE OF WfSonetPathIntervalEntry .1.3.6.1.4.1.18.3.4.24.9 |
wfSonetPathIntervalEntryAn entry in the Path Interval table WfSonetPathIntervalEntry .1.3.6.1.4.1.18.3.4.24.9.1 |
wfSonetPathIntervalIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.9.1.1 |
wfSonetPathIntervalNumberA number between 1 and 96, which identifies the interval for which the
set of statistics is available. The interval identified by 1 is the
most recently completed 15 minute interval, and the interval identified
by N is the interval immediately preceding the one identified by N-1.ro INTEGER .1.3.6.1.4.1.18.3.4.24.9.1.2 |
wfSonetPathIntervalESsThe counter associated with the number of Errored Seconds encountered
by a SONET/SDH Path in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.9.1.3 |
wfSonetPathIntervalSESsThe counter associated with the number of Severely Errored Seconds
encountered by a SONET/SDH Path in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.9.1.4 |
wfSonetPathIntervalCVsThe counter associated with the number of Coding Violations encountered
by a SONET/SDH Path in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.9.1.5 |
wfSonetPathIntervalUASsThe counter associated with the number of Unavailable Seconds encountered
by a SONET/SDH Path in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.9.1.6 |
wfSonetFarEndPathCurrentTableStatistics for the SONET far end path current table SEQUENCE OF WfSonetFarEndPathCurrentEntry .1.3.6.1.4.1.18.3.4.24.10 |
wfSonetFarEndPathCurrentEntryAn entry in the Far End Path current table WfSonetFarEndPathCurrentEntry .1.3.6.1.4.1.18.3.4.24.10.1 |
wfSonetFarEndPathCurrentIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.10.1.1 |
wfSonetFarEndPathCurrentESsThe counter associated with the number of Far End Errored Seconds
encountered by a SONET/SDH Path in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.10.1.2 |
wfSonetFarEndPathCurrentSESsThe counter associated with the number of Far End Severely Errored Seconds
encountered by a SONET/SDH Path in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.10.1.3 |
wfSonetFarEndPathCurrentCVsThe counter associated with the number of Far End Coding Violations
encountered by a SONET/SDH Path in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.10.1.4 |
wfSonetFarEndPathCurrentUASsThe counter associated with the number of Far End Unavailable Seconds
encountered by a SONET/SDH Path in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.10.1.5 |
wfSonetFarEndPathIntervalTableStatistics for the SONET far end path interval table SEQUENCE OF WfSonetFarEndPathIntervalEntry .1.3.6.1.4.1.18.3.4.24.11 |
wfSonetFarEndPathIntervalEntryAn entry in the Far End Path Interval table WfSonetFarEndPathIntervalEntry .1.3.6.1.4.1.18.3.4.24.11.1 |
wfSonetFarEndPathIntervalIndexIndex for this physical Sonet interface.ro INTEGER .1.3.6.1.4.1.18.3.4.24.11.1.1 |
wfSonetFarEndPathIntervalNumberA number between 1 and 96, which identifies the interval for which the
set of statistics is available. The interval identified by 1 is the
most recently completed 15 minute interval, and the interval identified
by N is the interval immediately preceding the one identified by N-1.ro INTEGER .1.3.6.1.4.1.18.3.4.24.11.1.2 |
wfSonetFarEndPathIntervalESsThe counter associated with the number of Far End Errored Seconds
encountered by a SONET/SDH Path in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.11.1.3 |
wfSonetFarEndPathIntervalSESsThe counter associated with the number of Far End Severely Errored Seconds
encountered by a SONET/SDH Path in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.11.1.4 |
wfSonetFarEndPathIntervalCVsThe counter associated with the number of Far End Coding Violations
encountered by a SONET/SDH Path in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.11.1.5 |
wfSonetFarEndPathIntervalUASsThe counter associated with the number of Far End Unavailable Seconds
encountered by a SONET/SDH Path in a particular 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.24.11.1.6 |
wfAtm OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5.1 |
wfAtmDeleteIndication to create or delete an ATM Base record.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.1.1 |
wfAtmInterfaceNumberNumber of ATM interfaces in the Wellfleet Router (entries
in the wfAtmInterfaceTable), regardless of their current state,
present on this system.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.1.2 |
wfAtmOverallStatusOverall status of ATM interfaces in the Wellfleet Router(entries
in the wfAtmInterfaceTable) present on this system. Healthy indicates
each configured interfaces are in the UP state. An interface
anomaly is indicative of one or more of the configured
interfaces being in the DOWN State. Other Anomaly is indicative
of one or more ATM interfaces being in the INIT or NOT PRESENT
statero Enumeration .1.3.6.1.4.1.18.3.5.9.5.1.3 |
wfAtmGlobalSigStkVersionGlobal signalling stack Version. This value will be used to
by management entities to know the global version of signalling.
The intent here is to have passive placeholder. Active versions
of signalling are maintained on a per ATM interface basis in
wfAtmSscopEntry and wfAtmSigEntry. If this is considered
of no value, please remove at your earliest convenience.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.1.4 |
wfAtmInterfaceTableATM Interface Table - Router Resident
The statistical and configuration parameters for an ATM Interface.
There is one MIB instance of this record per Sync or HSSI line
configured for ATM DXI support. The Physical ATM DXI interface
is managed via this table. SEQUENCE OF WfAtmInterfaceEntry .1.3.6.1.4.1.18.3.5.9.5.2 |
wfAtmInterfaceEntryThe attributes for a particular ATM DXI Interface WfAtmInterfaceEntry .1.3.6.1.4.1.18.3.5.9.5.2.1 |
wfAtmInterfaceDeleteIndication to create or delete an ATM DXI interface. This will
remove ATMNET access over this interface The ATM Interface
entry instance is removed from the MIB in this case.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.1 |
wfAtmInterfaceDisableIndicates when an ATM DXI interface is to be enabled or disabled.
Disabling will disable ATM Access over this interface. The ATM
Interface instance is NOT removed from the MIB in this case.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.2 |
wfAtmInterfaceStateIndicates the state for this interface.
The state indicates Not Present when the interface has been
configured but has not been initialized. Init state indicates
that the interface is in the process of being initialized by the
system. Up state indicates that the interface is operating
normally. Down state indicates that the ATM DXI interface is
physically or logically disabled.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.3 |
wfAtmInterfaceCircuitThe Wellfleet circuit number of this entryro INTEGER .1.3.6.1.4.1.18.3.5.9.5.2.1.4 |
wfAtmInterfaceMaxSupportedVCsMaximum number of VCs allowed on this interface. Initially set by
configuration system for PVCs onlyrw INTEGER .1.3.6.1.4.1.18.3.5.9.5.2.1.5 |
wfAtmInterfaceVCsInUseThe number of VCs that are currently configured on this interfacero INTEGER .1.3.6.1.4.1.18.3.5.9.5.2.1.6 |
wfAtmInterfaceDescrA textual string describing this ATM interface.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.5.2.1.7 |
wfAtmInterfaceTypeThe transmission type used at the ATM interface.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.8 |
wfAtmInterfaceLastChangeThe value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network management subsystem, then this
object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.5.2.1.9 |
wfAtmInterfacePlcpIdentifies the OID of the PLCP object in the MIB
If no additional transmission and/or media
specific information is available, this object has
the value { 0 0 }.ro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5.2.1.10 |
wfAtmMpeNullUsed to select Null, Multi-Protocol Encapsulation
(RFC 1294) or Multi-Protocol Encapsulation (RFC 1483)
layer for this Interface. Null is considered VC Based
Multiplexing and is not supported for Bridging.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.11 |
wfAtmCsNullUsed to configure the type of CS_PDU encapsulation supported on the ATM
DXI interface based on the ATM Forum's ATM DXI specification. This
configuration is on a per Interface basis. The supported values are
AAL3/4, AAL5 and Null (no CS_PDU encapsulation). Null is a propriatary
configurable value when no CS_PDU encapsulation is desired.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.12 |
wfAtmInterfaceMulticastThis indicates whether the ATM service provider offers multicast servicerw Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.13 |
wfAtmDropsThe cumulative count of packet drops on this ATM Interface.ro Counter .1.3.6.1.4.1.18.3.5.9.5.2.1.14 |
wfAtmInterfaceLmiDisableIndicates when an LMI entry is to be enabled or disabled. Disabling
will temporarily disable the ability to report
CSU/DSU traps and the ability to retrieve statistical information
from the CSU/DSU. The ATM LMI instance is NOT removed from the MIB
in this case.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.15 |
wfAtmInterfaceLineNumberInstance identifier. This value corresponds to the line number of the
Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.2.1.16 |
wfAtmInterfaceLLIndexInstance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.2.1.17 |
wfAtmInterfaceDxiModeATM DXI Mode. This attribute specifies the ATM DXI Mode for this
interface based on the ATM Forum's ATM DXI specification. Currently
supported is Modes 1a, 1b, 2 and Proprietary 2 (which is an earlier
version of Mode 2).rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.2.1.18 |
wfAtmUnknownVCPktsThe count of packets received with an unknown VCro Counter .1.3.6.1.4.1.18.3.5.9.5.2.1.19 |
wfAtmLmiTableATM Local Management Interface Table - Router Resident
The statistical and configuration parameters for an ATM DXI
Local Management Interface. There is one LMI MIB instance per Sync
or HSSI line configured for ATM DXI support. The LMI interface is
managed via this table. SEQUENCE OF WfAtmLmiEntry .1.3.6.1.4.1.18.3.5.9.5.3 |
wfAtmLmiEntryThe attributes for a particular ATM Lmi WfAtmLmiEntry .1.3.6.1.4.1.18.3.5.9.5.3.1 |
wfAtmLmiStateIndicates the state of the LMI for this interface
The state indicates Not Present when the LMI has been
configured but has not been initialized. Init state indicates
that the LMI is in the process of being initialized by the
system. Up state indicates that the LMI is operating
normally. Down state indicates that the LMI is
physically or logically disabled.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.3.1.1 |
wfAtmLmiCircuitThe circuit number of this entryro INTEGER .1.3.6.1.4.1.18.3.5.9.5.3.1.2 |
wfAtmLmiNoVCErrorsThe number of Frames dropped that couldn't be associated with
the LMI VPI/VCIro Counter .1.3.6.1.4.1.18.3.5.9.5.3.1.3 |
wfAtmLmiProxyRequestsThe number of SNMP Proxy Requestsro Counter .1.3.6.1.4.1.18.3.5.9.5.3.1.4 |
wfAtmLmiCsuDsuResponsesThe number of CSU/DSU SNMP Responses to Proxy Requestsro Counter .1.3.6.1.4.1.18.3.5.9.5.3.1.5 |
wfAtmLmiCsuDsuTrapsThe number of CSU/DSU SNMP Traps Receivedro Counter .1.3.6.1.4.1.18.3.5.9.5.3.1.6 |
wfAtmLmiOtherErrorsThe number of frames dropped to format or other errors.ro Counter .1.3.6.1.4.1.18.3.5.9.5.3.1.7 |
wfAtmLmiLineNumberInstance identifier. This value corresponds to the line number of the
Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.3.1.8 |
wfAtmLmiLLIndexInstance identifier. This value corresponds to the port's llindex
number. The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.3.1.9 |
wfAtmPlcpTableThe ATM PLCP Table - CSU/DSU Resident
The PLCP object reflects information about either DS1 or DS3
PLCP framing status and performance. There is one instance of
this object for every ATM DS1 or DS3 UNI.
The PLCP object is separated from the other ATM objects for
two reasons. First, there may be ATM UNIs which use physical
media other than DS1 or DS3, and thus the PLCP object may not
apply to them. Second, the PLCP object may also be applied
towards management of SMDS Interfaces (SIPs).
This PLCP object is essentially a superset of the PLCP object
described in the Internet Draft MIB for SMDS (SIPs). It contains
variables of interest to some ATM service providers and customers. SEQUENCE OF WfAtmPlcpEntry .1.3.6.1.4.1.18.3.5.9.5.4 |
wfAtmPlcpEntryper linenumber/llindex PLCP objects WfAtmPlcpEntry .1.3.6.1.4.1.18.3.5.9.5.4.1 |
wfAtmPlcpCctIdentifies the DS1 or DS3 PLCP port for which this entry
contains information. This corresponds to the Wellfleet
circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.4.1.1 |
wfAtmPlcpPhysicalIdentifies the OID of the first object in the standard
DS1 or DS3 MIBro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5.4.1.2 |
wfAtmPlcpLofTrue if Loss of Frame has been detectedro Enumeration .1.3.6.1.4.1.18.3.5.9.5.4.1.3 |
wfAtmPlcpLofCFATrue if Loss of Frame has been detected over the CFA time
periodro Enumeration .1.3.6.1.4.1.18.3.5.9.5.4.1.4 |
wfAtmPlcpYellowTrue if PLCP Yellow (Remote Alarm Indication) has been detectedro Enumeration .1.3.6.1.4.1.18.3.5.9.5.4.1.5 |
wfAtmPlcpYellowCFATrue if PLCP Yellow (Remote Alarm Indication) has been detected
over the CFA time periodro Enumeration .1.3.6.1.4.1.18.3.5.9.5.4.1.6 |
wfAtmPlcpStatusThe value of this variable indicates the PLCP
status as indicated by the three-bit PLCP LSS
code received from the remote end. Connected is
LSS code #0, linkUp is LSS code #6, and linkDown is
code #3. OtherCode means that one of the other five
possible code values is being received. OutOfFrame
means that the PLCP is in the out of frame state,
and therefore there is no code being received.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.4.1.7 |
wfAtmPlcpSecondsThe count of seconds elapsed since event counting
began or since the counters were last cleared. The
implementation may optionally allow this variable to
be set. If set, the set value is ignored, and this
variable and all other event counters for this
object are reset to zero.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.8 |
wfAtmPlcpBipErrorsThe count of PLCP Bit Interleaved Parity (BIP)
errors detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.9 |
wfAtmPlcpBipESecsBIP Errored Seconds. The count of seconds during
which one or more BIP errors were detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.10 |
wfAtmPlcpBipSESecsBIP Severely Errored Seconds. The count of seconds
during which five (5) or more BIP errors were detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.11 |
wfAtmPlcpFebesThe count of PLCP Far End Block Errors (FEBE)
detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.12 |
wfAtmPlcpFebeESecsFEBE Errored Seconds. The count of seconds during
which one or more FEBE errors were detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.13 |
wfAtmPlcpFebeSESecsFEBE Severely Errored Seconds. The count of seconds
during which five (5) or more FEBE errors were detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.14 |
wfAtmPlcpFrameErrorsThe count of PLCP Frame bit errors detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.15 |
wfAtmPlcpSevereFrameErrorsThe count of PLCP Severe Frame errors (aka Out Of
Frame Events) detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.16 |
wfAtmPlcpSEFSSeverely Errored Framing Seconds. The count of
seconds during which one or more PLCP Severe Frame
errors were detected.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.17 |
wfAtmPlcpUASUnavailable Seconds. The count of seconds during
which the PLCP service was declared to be unavailable.ro Counter .1.3.6.1.4.1.18.3.5.9.5.4.1.18 |
wfAtmPlcpLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.4.1.19 |
wfAtmPlcpLLIndexInstance identifier. This value corresponds to the port's
llindex. The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.4.1.20 |
wfAtmUniTableThe ATM UNI Table - CSU/DSU Resident
The ATM User Network Interface (UNI) object reflects information
about a particular ATM UNI. In particular it contains information,
both configuration and performance, from the 'ATM' or Cell layer
of the ATM protocol hierarchy. It optionally keeps some information
on a per-VPI/VCI basis. It 'points to' its associated
physical layer object, for example the DS1 or DS3 PLCP object.
It also 'points to' the (one or more) higher layer object(s),
namely the ATM Adaptation Layer (AAL) object(s) which further
process the ATM Cells.
It should be noted that in the ATM UNI MIB, the receive (transmit)
direction refers to data received from (transmitted to)
the ATM UNI interface.
** For DL200 and DL3200 there is only one ATM UNI per DL unit
** and only one AAL object (specifically VBR) per ATM UNI. SEQUENCE OF WfAtmUniEntry .1.3.6.1.4.1.18.3.5.9.5.5 |
wfAtmUniEntryper linenumber/llindex User Network Interface (UNI) objects -
wfAtmUniLineNumber and wfAtmUniLLIndex corresponds to Wellfleet
linenumber/llindex number WfAtmUniEntry .1.3.6.1.4.1.18.3.5.9.5.5.1 |
wfAtmUniCctThis corresponds to the Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.5.1.1 |
wfAtmUniPhysicalIdentifies the OID of the first object in the standard
DS1 or DS3 MIB corresponding to this ATM UNI portro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5.5.1.2 |
wfAtmUniAalIdentifies the AAL MIB corresponding to this ATM UNI port.
There is only one AAL currently for the DXI application.ro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5.5.1.3 |
wfAtmUniSecondsThe count of seconds elapsed since event counting
began or since the counters were last cleared.The
implementation may optionally allow this variable to
be set.If set, the set value is ignored, and this
variable and all other event counters for this
object are reset to zero.ro Counter .1.3.6.1.4.1.18.3.5.9.5.5.1.4 |
wfAtmUniLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.5.1.5 |
wfAtmUniLLIndexInstance identifier. This value corresponds to the port's llindex.
The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.5.1.6 |
wfAtmUniAtmTableThe ATM UNIATM Table CSU/DSU Resident
This list contains ATM Layer parameters, one entry
per ATM UNI port. The counts maintained in this table
are totals for the UNI, across all VPI/VCIs. SEQUENCE OF WfAtmUniAtmEntry .1.3.6.1.4.1.18.3.5.9.5.6 |
wfAtmUniAtmEntryper linenumber/llindex UNI ATM Layer objects -
wfAtmUniAtmLineNumber and wfAtmUniAtmLLIndex corresponds to
Wellfleet linenumber/llindex number WfAtmUniAtmEntry .1.3.6.1.4.1.18.3.5.9.5.6.1 |
wfAtmUniAtmCctThe ATM UNI port for which corresponds to the Wellfleet
circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.6.1.1 |
wfAtmUniAtmNoBuffersReceived ATM cells discarded due to the lack of
available cell buffersro Counter .1.3.6.1.4.1.18.3.5.9.5.6.1.2 |
wfAtmUniAtmHECsReceived ATM cells discarded due to an uncorrected
HECro Counter .1.3.6.1.4.1.18.3.5.9.5.6.1.3 |
wfAtmUniAtmCHECsReceived ATM cells for which a HEC error was detected
and correctedro Counter .1.3.6.1.4.1.18.3.5.9.5.6.1.4 |
wfAtmUniAtmNullCellsReceived Null (unassigned , empty) cellsro Counter .1.3.6.1.4.1.18.3.5.9.5.6.1.5 |
wfAtmUniAtmMisdeliveredCellsReceived cells with an invalid VPI/VCI and were discardedro Counter .1.3.6.1.4.1.18.3.5.9.5.6.1.6 |
wfAtmUniAtmReceivesValid (non-null) ATM Cells received at this layer and passed
upro Counter .1.3.6.1.4.1.18.3.5.9.5.6.1.7 |
wfAtmUniAtmTransmitsValid (non-null) ATM Cells transmitted at this layer and passed
down to the PLCP layerro Counter .1.3.6.1.4.1.18.3.5.9.5.6.1.8 |
wfAtmUniAtmLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.6.1.9 |
wfAtmUniAtmLLIndexInstance identifier. This value corresponds to the port's llindex.
The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.6.1.10 |
wfAtmVbrTableThe ATM VBR Table - CSU/DSU Resident
The ATM Variable Bit Rate (VBR) object is one of several types
of ATM Adaptation Layer (AAL) objects.
The ATM VBR object reflects information about a VBR service
carried by an ATM UNI on behalf of a DTE interface (e.g. a DXI).
In particular, it contains both configuration and performance
information about the Segmentation and Reassembly (SAR) sublayer
and the Convergence Sublayer (CS).
Each instance of the VBR object has only one corresponding DTE
interface, and only one corresponding ATM UNI, although it may
correspond to several VPI/VCIs within a particular ATM UNI.
The VBR object optionally keeps some information
on a per-VPI/VCI basis.
It should be noted that in the ATM VBR MIB, the receive (transmit)
direction refers to data received from (transmitted to)
the ATM UNI interface.
** For DL200 and DL3200 DSUs, there is only one ATM UNI per DSU
** and only one AAL object (specifically VBR) per ATM UNI.
** For these products, the DSU does not perform the
** integrity checks for the VBR CS layer, and thus will not
** provide all variables for the VBR CS table. The Router/Host
** is expected to perform these checks and provide these variables. SEQUENCE OF WfAtmVbrEntry .1.3.6.1.4.1.18.3.5.9.5.8 |
wfAtmVbrEntryper linenumber/llindex VBR AAL objects -
wfAtmVbrLineNumber and wfAtmVbrLLIndex corresponds to
Wellfleet linenumber/llindex number WfAtmVbrEntry .1.3.6.1.4.1.18.3.5.9.5.8.1 |
wfAtmVbrCctIdentifies the ATM VBR object which corresponds to the
Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.8.1.1 |
wfAtmVbrAtmUniIdentifies the OID of the first object in the ATM UNI
MIB corresponding to this ATM VBR-AALro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5.8.1.2 |
wfAtmVbrDxiIdentifies the DXI MIB corresponding to this ATM VBR-AAL.
There is only one AAL currently for the DXI application.ro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5.8.1.3 |
wfAtmVbrSecondsThe count of seconds elapsed since event counting
began or since the counters were last cleared. The
implementation may optionally allow this variable to
be set. If set, the set value is ignored, and this
variable and all other event counters for this
object are reset to zero.ro Counter .1.3.6.1.4.1.18.3.5.9.5.8.1.4 |
wfAtmVbrLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.8.1.5 |
wfAtmVbrLLIndexInstance identifier. This value corresponds to the port's llindex.
The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.8.1.6 |
wfAtmVbrSarTableThe ATM VBR SAR Table CSU/DSU Resident
This table contains ATM VBR-AAL, SAR Layer parameters,
the entry per ATM VBR-AAL object. The counts maintained
in this table are totals for the VBR, across all
VPI/VCIs within the VBR. SEQUENCE OF WfAtmVbrSarEntry .1.3.6.1.4.1.18.3.5.9.5.9 |
wfAtmVbrSarEntryper linenumber/llindex VBR AAL SAR sublayer objects -
wfAtmSarLineNumber and wfAtmSarLLIndex corresponds to
Wellfleet linenumber/llindex number WfAtmVbrSarEntry .1.3.6.1.4.1.18.3.5.9.5.9.1 |
wfAtmVbrSarCctidentifies the VBR_SAR object which corresponds to the
Wellfleet circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.9.1.1 |
wfAtmVbrSarAssemblyTimerThe maximum time period (milliseconds) allowed for CS_PDU
assembly process to complete. This is the time between
receipt of a BOM and receipt of an EOM SAR_PDU.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.9.1.2 |
wfAtmVbrSarCrc10ErrorsThe count of received SAR_PDUs discarded due to CRC10 errorro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.3 |
wfAtmVbrSarCellMidErrorsThe count of received SAR_PDUs discarded due to an invalid
MID field valuero Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.4 |
wfAtmVbrSarCsPduSizeTooBigErrorsThe count of received SAR_PDUs discarded due to CS_PDU
size is too big . NOTE: This attribute needs to be moved to
router based CS object.ro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.5 |
wfAtmVbrSarNoBufferErrorsNo CS_PDU assembly buffer spacero Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.6 |
wfAtmVbrSarComNoProcessErrorsReceived COM SAR_PDUs discarded due to lack of an active
CS_PDU assembly processro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.7 |
wfAtmVbrSarEomNoProcessErrorsReceived EOM SAR_PDUs discarded due to lack of an active
CS_PDU assembly processro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.8 |
wfAtmVbrSarCellSequenceErrorsThe count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
detecting a SAR sequence number error in a
received SAR_PDU.ro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.9 |
wfAtmVbrSarCellLengthErrorsThe count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
detecting a length field error in a
received SAR_PDU.ro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.10 |
wfAtmVbrSarBomBeforeEomErrorsThe count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
receiving a new BOM or SSM SAR_PDU for the
same VPI/VCI (and MID) before receiving the
EOM SAR_PDU.ro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.11 |
wfAtmVbrSarTimeoutsThe count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
expiration of the assembly timer.ro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.12 |
wfAtmVbrSarLengthExceedsThe count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
receiving more SAR_PDUs (and their payloads)
than will fit in the CS_PDU assembly buffer.ro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.13 |
wfAtmVbrSarReceivesThe count of received SAR_PDUs (all types,
i.e. BOM, COM, EOM, SSM) successfully
accumulated into a CS_PDU assembly buffer.ro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.14 |
wfAtmVbrSarTransmitsThe count of SAR_PDUs (all types, i.e. BOM,
COM, EOM, SSM) transmitted to the ATM layer
from a CS_PDU segmentation process.ro Counter .1.3.6.1.4.1.18.3.5.9.5.9.1.15 |
wfAtmVbrSarLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.9.1.16 |
wfAtmVbrSarLLIndexInstance identifier. This value corresponds to the port's llindex.
The Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.9.1.17 |
wfAtmVbrCsTableThe ATM VBR CS Table - Router Resident
This table contains ATM VBR-AAL, CS Layer parameters,
one entry per ATM VBR-AAL object. The counts maintained
in this table are totals for the VBR, across all
VPI/VCIs within the VBR. SEQUENCE OF WfAtmVbrCsEntry .1.3.6.1.4.1.18.3.5.9.5.11 |
wfAtmVbrCsEntryper linenumber/llindex VBR_CS objects -
wfAtmVbrCsLineNumber and wfAtmVbrCsLLIndex corresponds to
Wellfleet linenumber/llindex number WfAtmVbrCsEntry .1.3.6.1.4.1.18.3.5.9.5.11.1 |
wfAtmVbrCsCctIdentifies the VBR_CS object which corresponds to the Wellfleet
circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.11.1.1 |
wfAtmVbrCsBETagMismatchesThe count of received CS_PDUs discarded due to a mismatch when
comparing the BETag fields in the CS_PDU header and trailer.ro Counter .1.3.6.1.4.1.18.3.5.9.5.11.1.2 |
wfAtmVbrCsLengthMismatchesThe count of received CS_PDUs discarded due to a mismatch when
comparing the CS_PDU header BASize field, the CS_PDU trailer length
field and the actual length of the CS_PDU received.ro Counter .1.3.6.1.4.1.18.3.5.9.5.11.1.3 |
wfAtmVbrCsMisdeliveredPdusThe count of received SAR_PDUs discarded due to an invalid
VPI/VCI detected at this layer.ro Counter .1.3.6.1.4.1.18.3.5.9.5.11.1.4 |
wfAtmVbrCsReceivesThe count of the valid CS_PDUs received from the SAR layer and
passed on to the next upper layer for further processing.ro Counter .1.3.6.1.4.1.18.3.5.9.5.11.1.5 |
wfAtmVbrCsTransmitsThe count of CS_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmissionro Counter .1.3.6.1.4.1.18.3.5.9.5.11.1.6 |
wfAtmVbrCsLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.11.1.7 |
wfAtmVbrCsLLIndexInstance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.11.1.8 |
wfAtmVbrCsVciTableThe ATM VBR CS_VCI Table - Router Resident
This table contains ATM VBR-AAL, CS Layer parameters,
one entry per ATM VPI/VCI for which information has been
recorded per ATM VBR-AAL object. SEQUENCE OF WfAtmVbrCsVciEntry .1.3.6.1.4.1.18.3.5.9.5.12 |
wfAtmVbrCsVciEntryper virtual circuit VBR_CS objects WfAtmVbrCsVciEntry .1.3.6.1.4.1.18.3.5.9.5.12.1 |
wfAtmVbrCsVciVbrCctIdentifies the VBR_CS object which corresponds to the Wellfleet
circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.12.1.1 |
wfAtmVbrCsVciIndexIdentifies the VPI/VCI object for which this entry
contains information.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.12.1.2 |
wfAtmVbrCsVciBETagMismatchesThe count of received CSVCI_PDUs discarded due to a mismatch when
comparing the BETag fields in the CSVCI_PDU header and trailer.ro Counter .1.3.6.1.4.1.18.3.5.9.5.12.1.3 |
wfAtmVbrCsVciLengthMismatchesThe count of received CSVCI_PDUs discarded due to a mismatch when
comparing the CSVCI_PDU header BASize field, the CSVCI_PDU trailer
length field and the actual length of the CSVCI_PDU received.ro Counter .1.3.6.1.4.1.18.3.5.9.5.12.1.4 |
wfAtmVbrCsVciMisdeliveredPdusThe count of received SAR_PDUs discarded due to an invalid
VPI/VCI detected at this layer.ro Counter .1.3.6.1.4.1.18.3.5.9.5.12.1.5 |
wfAtmVbrCsVciReceivesThe count of the valid CSVCI_PDUs received from the SAR layer and
passed on to the next upper layer for further processing.ro Counter .1.3.6.1.4.1.18.3.5.9.5.12.1.6 |
wfAtmVbrCsVciTransmitsThe count of CSVCI_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmissionro Counter .1.3.6.1.4.1.18.3.5.9.5.12.1.7 |
wfAtmVbrCsVciOctetReceivesThe octet count of the valid CSVCI_PDUs received from the
SAR layer and passed on to the next upper layer for further
processing.ro Counter .1.3.6.1.4.1.18.3.5.9.5.12.1.8 |
wfAtmVbrCsVciOctetTransmitsThe count of CSVCI_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmissionro Counter .1.3.6.1.4.1.18.3.5.9.5.12.1.9 |
wfAtmVbrCsVciLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.12.1.10 |
wfAtmVbrCsVciLLIndexInstance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.12.1.11 |
wfAtmMpeTableThe ATM MPE Table - Router Resident
This table contains ATM DXI MPE Layer parameters,
one entry per ATM Circuit.The counts maintained
in this table are totals for the MPE Layer, across all
VPI/VCIs. SEQUENCE OF WfAtmMpeEntry .1.3.6.1.4.1.18.3.5.9.5.13 |
wfAtmMpeEntryper circuit MPE objects - wfAtmMpeIndex
corresponds to Wellfleet circuit number WfAtmMpeEntry .1.3.6.1.4.1.18.3.5.9.5.13.1 |
wfAtmMpeIndexIdentifies the MPE object for which this entry
contains information. This corresponds to the Wellfleet
circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.13.1.1 |
wfAtmMpeInvalidNlpidsThe count of received MPE_PDUs discarded due to an unknown
or unsupported NLPIDro Counter .1.3.6.1.4.1.18.3.5.9.5.13.1.2 |
wfAtmMpeInvalidPidsThe count of received MPE_PDUs discarded due to an unknown
or unsupported PIDro Counter .1.3.6.1.4.1.18.3.5.9.5.13.1.3 |
wfAtmMpeInvalidOuisThe count of received MPE_PDUs discarded due to an unknown
or unsupported OUIro Counter .1.3.6.1.4.1.18.3.5.9.5.13.1.4 |
wfAtmMpeMisdeliveredPdusThe count of received MPE_PDUs discarded due to an inactive
SAP.ro Counter .1.3.6.1.4.1.18.3.5.9.5.13.1.5 |
wfAtmMpeUnsupportedControlFieldsThe count of received MPE_PDUs discarded due to an unknown
or unsupported Control fieldro Counter .1.3.6.1.4.1.18.3.5.9.5.13.1.6 |
wfAtmMpeInvalidSAPThe cound of received MPE_PDUs discarded due to either a
bad SSAP or DSAP (RFC1483)ro Counter .1.3.6.1.4.1.18.3.5.9.5.13.1.7 |
wfAtmPvcTableThe ATM PVC Table - Router Resident
This table contains Virtual Circuit configuration and stats parameters,
one entry per ATM VPI/PVC for which information has been
recorded. SEQUENCE OF WfAtmPvcEntry .1.3.6.1.4.1.18.3.5.9.5.14 |
wfAtmPvcEntryper virtual circuit objects WfAtmPvcEntry .1.3.6.1.4.1.18.3.5.9.5.14.1 |
wfAtmPvcDeleteUsed to create/delete an instance of this object.
This action will result in a PVC being added or
removed from service.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.14.1.1 |
wfAtmPvcCctIdentifies the object which corresponds to the Wellfleet
circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.14.1.2 |
wfAtmPvcVpiThe VPI associated with this PVCro INTEGER .1.3.6.1.4.1.18.3.5.9.5.14.1.3 |
wfAtmPvcVciThe VCI associated with this PVCro INTEGER .1.3.6.1.4.1.18.3.5.9.5.14.1.4 |
wfAtmPvcReceivesThe count of the valid PVC_PDUs received from the SAR layer and
passed on to the next upper layer for further processing.ro Counter .1.3.6.1.4.1.18.3.5.9.5.14.1.5 |
wfAtmPvcTransmitsThe count of PVC_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmissionro Counter .1.3.6.1.4.1.18.3.5.9.5.14.1.6 |
wfAtmPvcOctetReceivesThe octet count of the valid PVC_PDUs received from the SAR
layer and passed on to the next upper layer for further
processing.ro Counter .1.3.6.1.4.1.18.3.5.9.5.14.1.7 |
wfAtmPvcOctetTransmitsThe octet count of PVC_PDUs received from upper layers and
sent to the SAR layer for segmentation and transmissionro Counter .1.3.6.1.4.1.18.3.5.9.5.14.1.8 |
wfAtmPvcModeThe mode of the given VC.
GROUP - treats the VC as one of many vc's on a circuit.
HYBRID - treats the VC as one of many vc's on a circuit for
protocol traffic, but as a separate circuit for bridging.
DIRECT - treats the VC as a separate circuit for all applications.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.14.1.9 |
wfAtmPvcDirectAccessCctCircuit number to use for this VC for hybrid or direct access
routingrw INTEGER .1.3.6.1.4.1.18.3.5.9.5.14.1.10 |
wfAtmPvcStateIndicates the state of the PVC.
The state indicates Not Present when the PVC has been
configured but has not been initialized. Init state indicates
that the PVC is in the process of being initialized by the
system. Up state indicates that the PVC is operating
normally. Down state indicates that the PVC is
disabled.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.14.1.11 |
wfAtmPvcMpeNullUsed to select Null, Multi-Protocol Encapsulation
(RFC 1294) or Multi-Protocol Encapsulation (RFC 1483)
layer for this PVC. Null is considered VC Based
Multiplexing and is not supported for Bridging.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.14.1.12 |
wfAtmPvcCsNullUsed to configure the type of CS_PDU encapsulation supported on
the ATM DXI PVC based on the ATM Forum's ATM DXI specification.
This configuration is on a per Direct VC basis. The supported
values are AAL3/4, AAL5 and Null (no CS_PDU encapsulation). Null
is a propriatary configurable value when no CS_PDU encapsulation
is desired.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.14.1.13 |
wfAtmPvcDisableUsed to enable/disable a PVCrw Enumeration .1.3.6.1.4.1.18.3.5.9.5.14.1.14 |
wfAtmPvcDropsThe total count of packets dropped on this VCro Counter .1.3.6.1.4.1.18.3.5.9.5.14.1.15 |
wfAtmPvcMulticastIndicates whether this VPI/VCI is used for multicast or
single destination.rw Enumeration .1.3.6.1.4.1.18.3.5.9.5.14.1.16 |
wfAtmPvcLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.14.1.17 |
wfAtmPvcLLIndexInstance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.14.1.18 |
wfAtmDxiTableThe ATM DXI Table - An entry in this table is either resident in
the Wellfleet MIB or in the Digital Link MIB via the SNMP Proxy.
The Component attribute determines local or remote residency.
The ATM Data Exchange Interface (DXI) object reflects
information about an ATM DXI interface between an ATM DSU
and a Router/Host. In particular, it contains both
configuration and performance information specific to the DXI
(ATM) interface.
Each DXI instance typically corresponds to several (ATM)
DXIADDRs. The DXI object optionally keeps some information
on a per-DXIADDR basis.
Each instance of the DXI object typically has only one
corresponding ATM -AAL object, but the MIB has been
structured so that a DXI may have more than one.
It should be noted that in the DXI MIB, the receive (transmit)
direction refers to data received from (transmitted to)
the ATM interface.
With a 23-bit DXIADDR, the range of valid DXIADDR index values is
1 thru 2**23 inclusive. Note that the 23-bit binary DXIADDR field
(with values 0 thru 2**23-1) from the Frame Relay header must be
incremented by one to yield the DXIADDR index for accessing the
tables in the MIB. The DXIADDR consisting of all zeros (with
corresponding MIB index value of 1) is reserved for the DXI
Local Management Interface (LMI) with the DSU.
DxiAddr ::= INTEGER (1..8388608)
** For DL200 and DL3200 DSUs, there is only one ATM DXI per DSU
** and only one AAL object (specifically VBR) per ATM DXI.
** For these products, the mapping between the DXI (Frame Relay)
** DXIADDR and the ATM VPI/VCI is fixed. The LMI DXIADDR has no
** corresponding VPI/VCI. Otherwise, the eight most significant
** bits of the DXIADDR map into the the VPI (the eight most
** significant bits of the VPI/VCI), the fifteen least
** significant bits of the DXIADDR map into the fifteen least
** significant bits of the VCI, and the most significant bit of
** the VCI is set to zero. SEQUENCE OF WfAtmDxiEntry .1.3.6.1.4.1.18.3.5.9.5.15 |
wfAtmDxiEntryper linenumber/llindex ATM DXI objects -
wfAtmDxiLineNumber and wfAtmDxiLLIndex corresponds to
Wellfleet linenumber/llindex number WfAtmDxiEntry .1.3.6.1.4.1.18.3.5.9.5.15.1 |
wfAtmDxiCctIdentifies the ATM DXI cct which corresponds to the Wellfleet
circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.15.1.1 |
wfAtmDxiComponentIdentifies the component where the ATM DXI parameters are
resident - either the router or CSU/DSU.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.15.1.2 |
wfAtmDxiMaxLmiPduLengthErrorsThe maximum length of an LMI PDU, measured in octetsro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.3 |
wfAtmDxiSecondsThe count of seconds elapsed since event counting began
or since the counters were last cleared. The implementation
may optionally allow this variable to be set. If set, the set
value is ignored , and this variable and all other event
counters for this object are reset to zero.ro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.4 |
wfAtmDxiDiscardedFramesThe count of received frames discarded due to lack of
buffer space.ro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.5 |
wfAtmDxiAbortedFramesThe count of the received frames aborted (and discarded) before
the closing flagro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.6 |
wfAtmDxiNonOctetAlignedFramesThe count of the received frames discarded due to not being octet
aligned.ro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.7 |
wfAtmDxiTooLongFramesThe count of the received frames discarded due to being longer
than the maximum allowed frame lengthro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.8 |
wfAtmDxiTooShortFramesThe count of the received frames discarded due to being shorter
than the minimum allowed frame length (less than 6 octets long)ro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.9 |
wfAtmDxiFrameChecksumErrorsThe count of the received frames discarded due to detected checksum
error (CRC16)ro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.10 |
wfAtmDxiFrameHeaderErrorsThe count of the received frames discarded due to detected frame
relay header errorsro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.11 |
wfAtmDxiValidFrameReceivesThe count of the valid frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.12 |
wfAtmDxiFrameTransmitsThe count of CSVCI_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmissionro Counter .1.3.6.1.4.1.18.3.5.9.5.15.1.13 |
wfAtmDxiLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.15.1.14 |
wfAtmDxiLLIndexInstance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.15.1.15 |
wfAtmDxiDxiAddrTableThe ATM DXI DXIADDR Table - Router and CSU/DSU Resident
This table contains ATM DXI parameters, one entry per DXI
DXIADDR for which information has been recorded per DXI
DXIADDR Layer. Since the DXIADDR consisting of all zeros (with
corresponding MIB index value of 1) is reserved
for the DXI Local Management Interface (LMI) with
the DSU, there is always at least one entry in the
table. SEQUENCE OF WfAtmDxiDxiAddrEntry .1.3.6.1.4.1.18.3.5.9.5.16 |
wfAtmDxiDxiAddrEntryper DXIADDR ATM DXI objects WfAtmDxiDxiAddrEntry .1.3.6.1.4.1.18.3.5.9.5.16.1 |
wfAtmDxiDxiAddrDxiCctIdentifies the Atm Dxi object for which this entry
contains information. This attribute corresponds to the Wellfleet
circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.5.16.1.1 |
wfAtmDxiDxiAddrDxiComponentIdentifies the component where the ATM DXI parameters are
resident - either the router or CSU/DSU.ro Enumeration .1.3.6.1.4.1.18.3.5.9.5.16.1.2 |
wfAtmDxiDxiAddrIndexIdentifies the DXIADDR object for which this entry
contains information.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.16.1.3 |
wfAtmDxiDxiAddrAtmVbrThe object identifier of the first object in the
ATM VBR-AAL MIB which corresponds to this DXIADDR
of this DXI port. If there is only one ATM VBR-AAL
object associated with this DXI object, then the
LMI DXIADDR entry in this table will have a valid
value for this variable, even though the
LMI DXIADDR has no valid VPI/VCI value.'ro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.5.16.1.4 |
wfAtmDxiDxiAddrVpiVciThe VPI/VCI of the ATM UNI of the ATM VBR-AAL
object which corresponds to this DXIADDR of this
DXI port. For the LMI DXIADDR there is no valid
VPI/VCI value.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.16.1.5 |
wfAtmDxiDxiAddrReceivesThe count of the valid frames received from the next lower
layer and passed on to the next upper layer for further
processing.ro Counter .1.3.6.1.4.1.18.3.5.9.5.16.1.6 |
wfAtmDxiDxiAddrTransmitsThe count of frames received from upper layers and sent to the
next lower layer for transmissionro Counter .1.3.6.1.4.1.18.3.5.9.5.16.1.7 |
wfAtmDxiDxiAddrLineNumberInstance identifier. This value corresponds to the line number
of the Wellfleet router.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.16.1.8 |
wfAtmDxiDxiAddrLLIndexInstance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.5.16.1.9 |
wfAtmizerIntfPortPhysical port number
::= { wfAtmizerIntfStatsEntry 2 }
wfAtmizerIntfLastChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTIONro Enumeration .wfAtmizerDebugEntry.1 |
wfAtmizerDebugCmdDebug command to be issued to ATMizers.rw INTEGER .wfAtmizerDebugEntry.2 |
wfAtmizerDebugCmdSizeNumber of parameters to the debug command.rw INTEGER .wfAtmizerDebugEntry.3 |
wfAtmizerDebugParam1The first parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.4 |
wfAtmizerDebugParam2The second parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.5 |
wfAtmizerDebugParam3The third parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.6 |
wfAtmizerDebugParam4The fourth parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.7 |
wfAtmizerDebugParam5The fifth parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.8 |
wfAtmizerDebugParam6The sixth parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.9 |
wfAtmizerDebugParam7The seventh parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.10 |
wfAtmizerDebugParam8The eighth parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.11 |
wfAtmizerDebugParam9The nineth parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.12 |
wfAtmizerDebugParam10The tenth parameter to the ATMizer debug command.rw INTEGER .wfAtmizerDebugEntry.13 |
wfAtmizerDebugRxDoneCompletion flag indicating that the RX ATMizer has completed the
debug command and the result is available in wfAtmizerDebugRxValue.rw Enumeration .wfAtmizerDebugEntry.14 |
wfAtmizerDebugRxValueThe result of the RX ATMizer debug operation.rw OCTET STRING .wfAtmizerDebugEntry.15 |
wfAtmizerDebugTxDoneCompletion flag indicating that the TX ATMizer has completed the
debug command and the result is available in wfAtmizerDebugTxValue.rw Enumeration .wfAtmizerDebugEntry.16 |
wfAtmizerDebugTxValueThe result of the TX ATMizer debug operation.rw OCTET STRING .wfAtmizerDebugEntry.17 |
wfAtmizerCfgSlotSlot number
::= { wfAtmizerCfgEntry 1 }
wfAtmizerCfgMaxVcl OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTIONro INTEGER .wfAtmizerDrvCfgEntry.4 |
wfAtmizerDrvCfgPortPhysical port number
::= { wfAtmizerDrvCfgEntry 5 }
wfAtmizerDrvCfgCct OBJECT-TYPE
SYNTAX INTEGER(1..1023)
ACCESS read-write
STATUS mandatory
DESCRIPTIONro Enumeration .wfAtmizerIntfStatsEntry.1 |