Wellfleet-DS1E1-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
570
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
570 total| Object Name |
|---|
wfDs1E1AnsiTableANSI Statistics line record - This table contains the
performance parameters for the ANSI register set SEQUENCE OF WfDs1E1AnsiEntry .1.3.6.1.4.1.18.3.4.8.13 |
wfDs1E1AnsiEntryAn entry in the DS1E1 Ansi table WfDs1E1AnsiEntry .1.3.6.1.4.1.18.3.4.8.13.1 |
wfDs1E1AnsiPortLineNumberInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.8.13.1.1 |
wfDs1E1AnsiCRCCountsCounts CRC-6 error eventsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.2 |
wfDs1E1AnsiBPVCountsCounts bipolar violationsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.3 |
wfDs1E1AnsiOOFCountsCounts out-of-frame error eventsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.4 |
wfDs1E1AnsiFECountsCounts errors in the FPS framing patternro Counter .1.3.6.1.4.1.18.3.4.8.13.1.5 |
wfDs1E1AnsiESCountsCounts errorred secondsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.6 |
wfDs1E1AnsiSESCountsCounts severly errorred secondsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.7 |
wfDs1E1AnsiUASCountscounts unavailable secondsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.8 |
wfDs1E1AnsiPRMR0CountsCounts PRMs that ewre received in the FDL in
the last four secondsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.9 |
wfDs1E1AnsiPRMR1CountsCounts PRMs that ewre received in the FDL in
the last four secondsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.10 |
wfDs1E1AnsiPRMR2CountsCounts PRMs that ewre received in the FDL in
the last four secondsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.11 |
wfDs1E1AnsiPRMR3CountsCounts PRMs that ewre received in the FDL in
the last four secondsro Counter .1.3.6.1.4.1.18.3.4.8.13.1.12 |
wfDs1E1AnsiPRMESCountsCounts errorred seconds as reported in the Performance
report messagesro Counter .1.3.6.1.4.1.18.3.4.8.13.1.13 |
wfDs1E1AnsiPRMSESCountsCounts severely errorred seconds as reported in the
Performance report messagesro Counter .1.3.6.1.4.1.18.3.4.8.13.1.14 |
wfDs1E1AnsiPRMECountsCounts Performance report messages that are received
in errorro Counter .1.3.6.1.4.1.18.3.4.8.13.1.15 |
RFC1155-SMIThis file describes the MIBS for managing the Multichannel T1 and E1
link modules.
DS1E1 MOD record - Contains DS1E1 module Configuration parameters SEQUENCE OF WfDs1E1ModuleEntry .1.3.6.1.4.1.18.3.4.9.1 |
wfDs1E1PortMapTableDS1E1 port map record - Used by the driver to identify the LineNumber
for the Port. The only table indexed by slot.connector. Its purpose is
to map slot.connector to a PortLineNumber. SEQUENCE OF WfDs1E1PortMapEntry .1.3.6.1.4.1.18.3.4.9.2 |
wfDs1E1PortMapEntryAn entry in the DS1E1 port table WfDs1E1PortMapEntry .1.3.6.1.4.1.18.3.4.9.2.1 |
wfDs1E1PortMapDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.2.1.1 |
wfDs1E1PortMapSlotInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.2.1.2 |
wfDs1E1PortMapConnectorInstance ID Connector, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.2.1.3 |
wfDs1E1PortMapLineNumberLineNumber off of which all other MIB instances are indexed.rw INTEGER .1.3.6.1.4.1.18.3.4.9.2.1.4 |
wfDs1E1PortMapDslIdWhen this T1/E1 interface is configured for Primary Rate ISDN (PRI) this
attribute provides the ID of this Digital Subscriber Loop (DSL) interface.
Each T1 or E1 PRI interface on a particular slot is assigned a unique DSL
ID.ro INTEGER .1.3.6.1.4.1.18.3.4.9.2.1.5 |
wfDs1E1PortTableDS1E1 port record - Contains MUNICH32 Configuration parameters SEQUENCE OF WfDs1E1PortEntry .1.3.6.1.4.1.18.3.4.9.3 |
wfDs1E1PortEntryAn entry in the DS1E1 port table WfDs1E1PortEntry .1.3.6.1.4.1.18.3.4.9.3.1 |
wfDs1E1PortDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.1 |
wfDs1E1PortDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.2 |
wfDs1E1PortStateLine Driver state variablero Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.3 |
wfDs1E1PortLineNumberLineNumber for this port. This value is assigned at configuration time
and uniquely identifies this interface. This LineNumber not equal to
any of the LineNumbers assigned to the LogicalLines configured through
this Port.ro INTEGER .1.3.6.1.4.1.18.3.4.9.3.1.4 |
wfDs1E1PortMtuMTU parameter. Obsoleted, it is no longer referenced.rw INTEGER .1.3.6.1.4.1.18.3.4.9.3.1.5 |
wfDs1E1PortSignalLevelSpecifies T1 transmit power level, in terms of DB. They
translate into cable length as follows:
0.0dB -> 0-133 ft
0.5dB -> 133-266 ft
0.8dB -> 266-399 ft
1.1dB -> 399-533 ft
1.5dB -> 533-655 ftrw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.6 |
wfDs1E1PortSetupAlarmThresholdSpecifies setup time for performance failure conditions,
in seconds. When a performance defect is present for greater
than the time specified by this parameter a performance
failure is registered and a message is logged.rw INTEGER .1.3.6.1.4.1.18.3.4.9.3.1.7 |
wfDs1E1PortClearAlarmThresholdSpecifies clear time for performance failure conditions,
in seconds. When a performance failure condition has been
cleared for greater than the time specified by this parameter
then the failure cleared condition is registered and a
message is logged.rw INTEGER .1.3.6.1.4.1.18.3.4.9.3.1.8 |
wfDs1E1PortFdlTargetHdlcAddressSelects between the two FDL target address modes. This determines
whether the near-end FDL will respond to HDLC address AZ or
BY in the FDL messages received from the far-end.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.9 |
wfDs1E1PortAcceptLoopbackRequestThe DS1E1 link module is capable of detecting loop up and loop down
codes received from the far end. This parameter enables and disables
loop up/down code detection circuitry. If enabled, this interface
will accept and comply with a request to go into loopback mode from
a far end device.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.10 |
wfDs1E1PortLoopbackStateIndicates the current loopback state of this interface. The interface
can be in one the following states:
Payload Loopback
Line Loopback
no loopback
Payload or Line loopback modes can be initiated by either of two methods:
Manager requested Loopback (MGRREQPAYLOADLOOP or MGRREQLINELOOP) is
initiated by the Manager of this device.
Network requested Loopback (NETREQPAYLOADLOOP or NETREQLINELOOP) is
initiated by this interface receiving an in-band request on the network
from the far end device.ro Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.11 |
wfDs1E1PortBertModeAn option to generate and analyze specific test patterns
is provided in BERT mode of operation. Only one port
can be in BERT mode at a time. This attribute selects
normal or BERT mode of operationrw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.12 |
wfDs1E1PortBertTestPatternWhen a port is in BERT mode, it is capable of generating
a set of known patterns. This paramater selects between those
patternsrw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.13 |
wfDs1E1PortBertSendAlarmSpecifies a Alarm Indication Signal (AIS) (Blue Alarm) or yellow alarm to
be transmitted while in BERT mode.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.14 |
wfDs1E1PortInternationalBitSpecifies if the International bit should be set in
the E1 framerw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.15 |
wfDs1E1PortLineApplicationSpecifies the application that the LogicalLines of this Port will provide.
NONPRI indicates that all of the LogicalLines will have a permanent Cct
number and will not be used to dial to varying destinations. PRI
indicates that some or all of the ds0s of this port will be used for switched
Ccts using ISDN. MIXED indicates that some of the ds0s are being used for
switched Ccts using ISDN and some are being used for non PRI permanent
connections for other applications such as leased lines or Frame Relay.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.16 |
wfDs1E1PortLoggingEnableMaskSpecifies which catagories of extended event log messages are enabled for
logging. Current bit definitions are:
bit 31 bit 0
++
| |
++
bit0 ISDN PRI debug messages
bit1-31 reservedrw INTEGER .1.3.6.1.4.1.18.3.4.9.3.1.17 |
wfDs1E1PortSendPrmCrAddressBitSpecifies the Performance message as originating from either a
Carrier or Customer Installation (CI). As the performance
message is sent out the FDL, the PRM Opening Address C/R bit
is either set (Carrier) or cleared (CI). This feature is only
supported by the QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.18 |
wfDs1E1PortAcceptPrmCrAddressBitAccepts only Performance messages originating from either a
Carrier or Customer Installation (CI), as determined below.
The PRM Opening Address C/R bit is read upon receiving a
performance message. If the Performance message does not
originate from the expected source, it is discarded. This
feature is only supported by the QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.19 |
wfDs1E1PortLineImpedanceOptionSupports user selectible Line Impedance option for ASN MCE1
Net Modules.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.20 |
wfDs1E1PortFdlLoopInterframeFillEnables the Loop Retention Interframe Time Fill for
the FDL after sending Loop Up Code. Also enables the
detection of the Loop Retention Code when placed into
Line or Payload loopback by the remote end.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.21 |
wfDs1E1PortRelayCtrlThe Relay on the QMCT1 will always be placed into
loopback for the following conditions:
1. Power Up
2. Reboot
3. Hardware Reset Button
4. System CRASH
However, when altering QMCT1 Port or Module MIBs' attributes
with a restart characteristic, the state of the Relay will
be controlled by this MIB attribute. When set to loop (1),
the Relay will go into loopback as the Port/Module is
re-initialized. The Relay will come out of loopback as the
Port/Module re-initialization is complete. When set to
noLoop (2), the Relay will remain in its present state as
the Port/Module is re-initialized.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.22 |
wfDs1E1PortRelayStatusThis attribute indicates the current state of the Relay
on the QMCT1. When set to loop (1), the Relay is currently
looping data from the Rx path onto the Tx path. When set
to noLoop (2), the Rx path and Tx path are connected to the
Framer. Note that the Framer may be placed into loopback
without affecting this attribute.ro Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.23 |
wfDs1E1PortPrimaryClockSourceSelects the Primary source of the Tx Clock for the DS1/E1
interfacerw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.24 |
wfDs1E1PortSecondaryClockSourceSelects the Secondary source of the Tx Clock for the DS1/E1
interfacerw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.25 |
wfDs1E1PortCurrentClockIndicates the clock source currently in use by the DS1ro Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.26 |
wfDs1E1PortExtClockOperationalIndicates whether the External clock is operationalro Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.27 |
wfDs1E1PortTransmitWaveformSpecifies T1 transmit waveform settings. Legal values are:
long haul (LBO 0.0dB)
long haul (LBO 7.5dB)
long haul (LBO 15.0dB)
long haul (LBO 22.5dB)
short haul (0-110 ft)
short haul (110-220 ft)
short haul (220-330 ft)
short haul (330-440 ft)
short haul (440-550 ft)
short haul (550-660 ft)
Note that this attribute is not supported by all T1 interfaces.
For those interfaces that DO NOT support this attribute, the
wfDs1E1PortSignalLevel attribute is used instead.rw Enumeration .1.3.6.1.4.1.18.3.4.9.3.1.28 |
wfDs1E1ConfigTableDS1E1 Configuration Table. This is a copy of the dsx1ConfigTable found
in RFC1406. The table is indexed with PortLineNumber instead of ifIndex,
however. SEQUENCE OF WfDs1E1ConfigEntry .1.3.6.1.4.1.18.3.4.9.4 |
wfDs1E1ConfigEntryAn entry in the DS1E1 config table WfDs1E1ConfigEntry .1.3.6.1.4.1.18.3.4.9.4.1 |
wfDs1E1ConfigDeleteCreate/Delete attributerw Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.1 |
wfDs1E1ConfigPortLineNumberThe index ID for this record. It is the line number assigned to a port
in the wfDs1E1PortMapEntry for a port.connector pair. Its channel field
should be 0.ro INTEGER .1.3.6.1.4.1.18.3.4.9.4.1.2 |
wfDs1E1ConfigIfIndexCurrently this is the sames as wfDs1E1LinePortIndexro INTEGER .1.3.6.1.4.1.18.3.4.9.4.1.3 |
wfDs1E1ConfigTimeElapsedThe number of seconds that have elapsed since the beginning of the
current error-measurement period. Only relevant when the
wfDs1E1ConfigLineType is ESF and the wfDs1E1ConfigFdl is AT&T 54016.ro INTEGER .1.3.6.1.4.1.18.3.4.9.4.1.4 |
wfDs1E1ConfigValidIntervalsThe number of previous intervals for which valid data was collected. The
value will be 96 unless the interface was brought on-line within the last
24 hours, in which case the value will be the number of complete 15 minute
intervals the since interface has been online. Only relevant when the
wfDs1E1ConfigLineType is ESF and the wfDs1E1ConfigFdl is AT&T 54016.ro INTEGER .1.3.6.1.4.1.18.3.4.9.4.1.5 |
wfDs1E1ConfigLineTypeThis attribute is used to configure the line framing type to match
the carrier's framing. SF and ESF are T1 framing types and the main
differences between the two are the number of frames in a superframe
and the use of the f-bit. The E1, E1CRC, E1MF, and E1CRCMF are used
for E1 lines.rw Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.6 |
wfDs1E1ConfigLineCodingThis variable describes the variety of Zero Code Suppression used on the
link, which in turn affects a number of its characteristics. It should
be set to match the carrier.
AMI (alternate mark inversion) refers to a mode wherein no zero code
suppression is present and the line encoding does not solve the problem
directly. In this application, the higher layer must provide data
which meets or exceeds the pulse density requirements, such as inverting
HDLC data. This could be used for T1 or E1 lines.
B8ZS refers to the use of a specified pattern of normal bits and bipolar
violations which are used to replace a sequence of eight zero bits. This
can be used on T1 lines while HDB3 provides similar functionality for
E1 links.rw Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.7 |
wfDs1E1ConfigSendCodeThis variable is currently read-only and it indicates what type of code is
being sent across the DS1 interface by the device. The values mean:
SENDNOCODE - sending looped or normal data
SENDLINECODE - sending a request for a line loopback
SENDPAYLOADCODE - sending a request for a payload loopback
SENDRESETCODE - sending a loopback termination request
SENDQRS - sending a Quasi-Random Signal (QRS) test pattern
SEND511PATTERN - sending a 511 bit fixed test pattern
SEND3IN24PATTERN - sending a fixed test pattern of 3 bits set in 24
SENDOTHERTESTPATTERN - sending a test pattern other than those
described by this objectro Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.8 |
wfDs1E1ConfigCircuitIdentifierThis attribute is not used and appears here as a place holder only. If it
was implemented then it would contain the transmission vendor's circuit
identifier, for the purpose of facilitating troubleshooting.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.9.4.1.9 |
wfDs1E1ConfigLoopbackConfigThis variable represents the loopback configuration of the DS1 interface.
The value NOLOOP indicates the port is not in loopback. The value
PAYLOADLOOP indicates the port is in payload loopback which means that
data is looped back after it goes through the framer. The value LINELOOP
indicates the port is in line loopback which means that data is looped
back before the framer.rw Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.10 |
wfDs1E1ConfigLineStatusThis variable is a bit-map which indicates the Line Status of the
interface. It contains loopback, failure, received 'alarm' and
transmitted 'alarm' information.
The bit definition as as follows with bit #0 being the LSB.
bit 0 NOALARM - No alarm present, set only when none of the other bits are.
1 RCVFARENDLOF - Far end LOF (a.k.a., Yellow Alarm)
2 XMTFARENDLOF - Near end sending LOF Indication
3 RCVAIS - Far end sending AIS
4 XMTAIS - Near end sending AIS
5 LOSSOFFRAME - Near end LOF (a.k.a., Red Alarm)
6 LOSSOFSIGNAL - Near end Loss Of Signal
7 LOOPBACKSTATE - Near end is looped
8 T16AIS - E1 only, TS16 AIS
9 RCVFARENDLOMF - E1 only, Far End Sending TS16 LOMF
10 XMTFARENDLOMF - E1 only, Near End Sending TS16 LOMF
11 RCVTESTCODE - Near End detects a test code
12 OTHERFAILURE - any line status not defined here'ro Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.11 |
wfDs1E1ConfigSignalModeThis attribute is not implemented and exists here only as a place holder.ro Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.12 |
wfDs1E1ConfigTransmitClockSourceThe source of Tranmit Clock. LOOPTIMING indicates that the recovered
receive clock is used as the transmit clock. LOCALTIMING indicates that
a local clock source is used. Either the internal clock or the external
clock through the extra connector on the board. THROUGHTIMING indicates
that recovered receive clock from another interface is used as the
transmit clock.ro Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.13 |
wfDs1E1ConfigFdlThis attribute is used to configure the type facilities data link (FDL).
The ANSI403 configures the port to use the FDL exchange described in
the ANSI T1 403 specification. ATT54016 is used to configure the port
for the for the FDL exchange listed in the AT&T 54016 document. NONE
is used when no FDL is desired. The FDL can only be used when the line
type is ESF.rw Enumeration .1.3.6.1.4.1.18.3.4.9.4.1.14 |
wfDs1E1ActionTableDS1E1 configuration Action record - Contains MUNICH32 and Framer
write only Configuration parameters SEQUENCE OF WfDs1E1ActionEntry .1.3.6.1.4.1.18.3.4.9.5 |
wfDs1E1ActionEntryAn entry in the DS1E1 Config table WfDs1E1ActionEntry .1.3.6.1.4.1.18.3.4.9.5.1 |
wfDs1E1ActionPortLineNumberInstance ID LineNumber, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.5.1.1 |
wfDs1E1ActionBertResetReset counters on BERT devicerw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.2 |
wfDs1E1ActionBertErrorInsertIndicates that an error be injected into the transmitted data
stream while in BERT mode.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.3 |
wfDs1E1ActionSendLoopCodeSelects a Loop Up/Down code to be sent to the remote endrw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.4 |
wfDs1E1ActionSendFdlLoopbackCodeSelects an FDL code to be sent to the remote end.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.5 |
wfDs1E1ActionSendLoopUpFractionalCodeSelects Fractional Loop Up code to be sent to the remote end.
Value passed through this attribute is the Logical Line number
(1 through 24). This feature is only supported by the QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.6 |
wfDs1E1ActionSendLoopDownFractionalCodeSelects Fractional Loop Down code to be sent to the remote
end. Value passed through this attribute is the Logical Line
number (1 through 24). This feature is only supported by the
QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.7 |
wfDs1E1ActionClearFractionalLoopStateRemoves any Logical Line left in hardware Fractional T1
loopback state. The Logical Line number is passed as an
argument. This feature is only supported by the QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.8 |
wfDs1E1ActionClearFdlStatsClears this port's FDL Statistics. This feature is only
supported by the QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.9 |
wfDs1E1ActionClearCurrentStatsClears this port's Current 15 minute Statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.10 |
wfDs1E1ActionClearFarEndCurrentStatsClears this port's Far End, Current 15 minute Statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.11 |
wfDs1E1ActionClearDayCurrentStatsClears this port's Current Day Statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.12 |
wfDs1E1ActionClearFarEndDayCurrentStatsClears this port's Far End, Current Day Statistics.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.13 |
wfDs1E1ActionClearIntervalStatsClears All Interval Statistics (15 minute and day) of this port.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.14 |
wfDs1E1ActionClearFarEndIntervalStatsClears All Far End Interval Statistics (15 minute and day) of this port.rw Enumeration .1.3.6.1.4.1.18.3.4.9.5.1.15 |
wfLogicalLineTableLogicalLine record - Contains configuration parameters and
statistics for MUNICH32 which are LogicalLine specific. SEQUENCE OF WfLogicalLineEntry .1.3.6.1.4.1.18.3.4.9.6 |
wfLogicalLineEntryAn entry in the LOGICAL_LINE table WfLogicalLineEntry .1.3.6.1.4.1.18.3.4.9.6.1 |
wfLogicalLineDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.1 |
wfLogicalLineDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.2 |
wfLogicalLineStateLine Driver state variablero Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.3 |
wfLogicalLinePortLineNumberInstance ID PortLineNumber, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.4 |
wfLogicalLineIndexIndex for this line instance, filled in by driver.
The index corresponds to the position of the
circuit, from 1 to 31, on the port.ro INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.5 |
wfLogicalLineCctCircuit number for this line instancerw INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.6 |
wfLogicalLineLineNumberLineNumber for this logical line instance. This is the same line number
contained in the PORT_TABLE with the channel field nonzero.rw INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.7 |
wfLogicalLineBoflSelects Breath of Life (BOFL) parameter. If selected, a BOFL
packet is sent out on the wire as often as specifies by the
wfLogicalLineBoflTmo parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.8 |
wfLogicalLineBoflTmoIndicates the time-period between BOFL packetsrw INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.9 |
wfLogicalLineFractionalLoopbackAny Logical Line on this T1/E1 port is capable of being put into
loopback, i.e. data coming into that circuit from the wire is
mirrorred back onto the wire. This parameter enables or
disables this loopback feature on any circuit.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.10 |
wfLogicalLineTimeSlotAssignmentLists the time-slots which constitute this channel. Read only attribute
that contains a list of time-slots from 1 to 31 used by the channelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.9.6.1.11 |
wfLogicalLineMtuContains the largest frame size that can be received by the logical line.
Anything larger than the MTU will be discarded. In all cases except when
the wfLogicalLineWanProtocol is LAPB, this value will be the same as
wfLogicalLineCfgMtu. In the LAPB case it will be twice wfLogicalLineCfgMtu
with a maximum of 4608.ro INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.12 |
wfLogicalLineMadrLine MAC address, fixed - line driver fills in from the 48 bit
address stored in the serial number prom.ro OCTET STRING .1.3.6.1.4.1.18.3.4.9.6.1.13 |
wfLogicalLineWanProtocolWAN protocol selection is provided via this parameter. The
supported protocols can be selected per circuit.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.14 |
wfLogicalLineHdlcServiceHDLC Service type for this line. Transparent is raw HDLC mode, LLC1 will
prefix the HDLC address and control fields to the frame.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.15 |
wfLogicalLineLocalHdlcAddressThis attribute is only used if the Wan protocol is Wellfleet Standard
Proprietary Point to Point. This attribute is unused for other Wan
protocols.
The local HDLC address can take on values between 1 and 7. The default is
7. 1 is refered to as DCE. 3 is refered to DTE. All others are refered
to as EXPLICIT. EXPLICIT indicates that the user has explicitely selected
the address.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.16 |
wfLogicalLineRemoteHdlcAddressThis attribute is only used if the Wan protocol is Wellfleet Standard
Proprietary Point to Point. This attribute is unused for other Wan
protocols.
The remote HDLC address can take on values between 1 and 7. The default is
7. 1 is refered to as DCE. 3 is refered to DTE. All others are refered
to as EXPLICIT. EXPLICIT indicates that the user has explicitely selected
the address.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.17 |
wfLogicalLineRateAdaptionDetermines the number of bits and their bit positions
within the time-slot. 64k selection uses all 8 bits in
the time-slot. The two 56k selections use 7 of the 8
bits in the time-slot. 56k_MSB does not use the most
significant bit and 56k_LSB does not use the least
significant bit in the time-slot. If
the logical line is configured for DS0-A operation, rate
adaptions of 9.6 Kbps and 19.2 Kbps may be configured.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.18 |
wfLogicalLineIFTFDetermines the Interframe time fill character to be
transmitted by the MUNICH. In case of IFTF_FLAGS, 0x7E
is sent and in case of IFTF_IDLES 0xff is sent as the
interframe timefill characters.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.19 |
wfLogicalLineCRCSizeDetermines the CRC Size. When CRC32 is selected a 32 bit
CRC is appended to the frame being transmitted and a 32
bit CRC check is performed on the received frame. When
CRC16 is selected, a 16 bit CRC is appended to the
transmitted frame and a 16 bit CRC is performed. on the
received frame.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.20 |
wfLogicalLineRxOctetsNumber of octets received without errorro Counter .1.3.6.1.4.1.18.3.4.9.6.1.21 |
wfLogicalLineRxFramesNumber of frames received without errorro Counter .1.3.6.1.4.1.18.3.4.9.6.1.22 |
wfLogicalLineTxOctetsNumber of octets transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.9.6.1.23 |
wfLogicalLineTxFramesNumber of frames transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.9.6.1.24 |
wfLogicalLineRxErrorsNumber of receive errorsro Counter .1.3.6.1.4.1.18.3.4.9.6.1.25 |
wfLogicalLineTxErrorsNumber of transmission errorsro Counter .1.3.6.1.4.1.18.3.4.9.6.1.26 |
wfLogicalLineLackRxResourcesNumber of Rx frames dropped due to lack of buffer resourcesro Counter .1.3.6.1.4.1.18.3.4.9.6.1.27 |
wfLogicalLineLackTxResourcesNumber of Tx frames dropped due to lack of system resourcesro Counter .1.3.6.1.4.1.18.3.4.9.6.1.28 |
wfLogicalLineTxUnderflowsNumber of Tx frames dropped due to Transmit underflowro Counter .1.3.6.1.4.1.18.3.4.9.6.1.29 |
wfLogicalLineRxOverflowsNumber of Rx frames dropped due to Receive overflowro Counter .1.3.6.1.4.1.18.3.4.9.6.1.30 |
wfLogicalLineRxNullFramesNumber of short frames received (with no data bytes)ro Counter .1.3.6.1.4.1.18.3.4.9.6.1.31 |
wfLogicalLineRxShortFramesNumber of short frames received whose length is either 1 or 2 data bytes.ro Counter .1.3.6.1.4.1.18.3.4.9.6.1.32 |
wfLogicalLineRxLossSyncsLoss of synchronization on receiverro Counter .1.3.6.1.4.1.18.3.4.9.6.1.33 |
wfLogicalLineRxCRCErrorsCRC error receivedro Counter .1.3.6.1.4.1.18.3.4.9.6.1.34 |
wfLogicalLineRxNonOctetBitsNon-Octet bits received in framero Counter .1.3.6.1.4.1.18.3.4.9.6.1.35 |
wfLogicalLineRxLongFramesFrame longer than MFL receivedro Counter .1.3.6.1.4.1.18.3.4.9.6.1.36 |
wfLogicalLineRxAbortFramesAborted frame receivedro Counter .1.3.6.1.4.1.18.3.4.9.6.1.37 |
wfLogicalLineRxDescOverflowsReceive overflow on chip bufferro Counter .1.3.6.1.4.1.18.3.4.9.6.1.38 |
wfLogicalLineRxReplenMissesCount of number of packet buffer misses while attempting to
replenish driver receive ringro Counter .1.3.6.1.4.1.18.3.4.9.6.1.39 |
wfLogicalLineRxIFCsNumber of times the device detects a change of interframe time-fill
between incomming frames.ro Counter .1.3.6.1.4.1.18.3.4.9.6.1.40 |
wfLogicalLineRxDropPacketsNumber of packets dropped after receptionro Counter .1.3.6.1.4.1.18.3.4.9.6.1.41 |
wfLogicalLineCfgTxQueueLengthConfigured Transmit Queue Length. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero causes router based default values to be used. All values are
accepted. Care should be taken not to set this to a value which is
much greater than the default. The default can be read out of the
wfLoigcalLineTxQueueLength attribute when the router is running with
this attribute set to zero. Sets to this attribute may take up to
one minute to take effect.rw INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.42 |
wfLogicalLineCfgRxQueueLengthConfigured Receive Queue Length. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero cuases router based default values to be used. Values larger
than the compiled ring size are truncated to the compiled ring
size. Sets to this attribute may take up to one minute to take effect.rw INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.43 |
wfLogicalLineTxQueueLengthCurrent hardware transmit queue lengthro INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.44 |
wfLogicalLineRxQueueLengthCurrent Receive queue lengthro INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.45 |
wfLogicalLineTxQueueEmptiesThe number of times the transmit ring is found
empty when transmitting packetsro Counter .1.3.6.1.4.1.18.3.4.9.6.1.46 |
wfLogicalLineRxIntProcsDEBUG paramete - Receive Interrupt processing countro Counter .1.3.6.1.4.1.18.3.4.9.6.1.47 |
wfLogicalLineTxIntProcsDEBUG parameter - Tx interrupt processing countro Counter .1.3.6.1.4.1.18.3.4.9.6.1.48 |
wfLogicalLineRxPktCorruptionsDEBUG parameter - Corruption check on receivero Counter .1.3.6.1.4.1.18.3.4.9.6.1.49 |
wfLogicalLineTurboBoflDEBUG parameter - Turbo bofl enabled or disabledrw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.50 |
wfLogicalLineBoflNumDEBUG parameter - Number of breath of life packets per breath
of liferw INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.51 |
wfLogicalLineBoflLenDEBUG parameter - breath of life packet lengthrw INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.52 |
wfLogicalLineOutQLenThe instantaneous current length of the output packet queue (in packets).ro Gauge .1.3.6.1.4.1.18.3.4.9.6.1.53 |
wfLogicalLineLastChangeThe value of SysUpTime at the time the interface entered it's current
operational state (UP state). SysUpTime is defined as the time (in
hundredths of a second) since the network management portion of the
system was last re-initialized. Usually the time since boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.4.9.6.1.54 |
wfLogicalLineCfgMtuSpecifies the largest frame size that can be received by the logical line.
Anything larger than the MTU will be discarded.rw INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.55 |
wfLogicalLineRemoteLpbkDetectionThis attribute enables Remote Loopback Detection. When enabled along with
wfLogicalLineBofl, the device driver will detect when it is receiving its
own BOFL packets and will bring the interface down assuming that somewhere
down stream the link has been put into loopback.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.56 |
wfLogicalLineLastStateThe state which the Logical Line driver was in prior to the most recent
re-initialization.ro Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.57 |
wfLogicalLineRxIdlesNumber of received frames followed by ShortFrame errors reported by the
hardware. ShortFrame errors imediately after received frames actually
indicates an Idle (all 1s) interframe time fill. One ShortFrame is
allowed per received frame without incrementing wfLogicalLineRxErrors
or wfLogicalLineRxShortFrames. Additional ShortFrames will not increment
wfLogicalLineRxIdles but will increment both wfLogicalLineRxErrors and
wfLogicalLineRxShortFrames.ro Counter .1.3.6.1.4.1.18.3.4.9.6.1.58 |
wfLogicalLineRoleSpecifies the role of this Logical Line. This attribute directs the Logical
Line to be either a normal permanent synchronous connection, a Primary Rate
ISDN 'D' channel or a Primary Rate ISDN 'B' channel.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.59 |
wfLogicalLineActiveCctActive CCT number for this LogicalLine. Used in ISDN PRI to indicate the
CCT of the current call in progress.ro INTEGER .1.3.6.1.4.1.18.3.4.9.6.1.60 |
wfLogicalLineActualRateAdaptionIndicates the current Rate Adaption in use. This may differ from the
configured Rate Adaption in ISDN PRI applications. This attribute indicates
the number of bits and their bit positions within the time-slot. 64k
selection uses all 8 bits in the time-slot. The two 56k selections use 7 of
the 8 bits in the time-slot. 56k_MSB does not use the most significant bit
and 56k_LSB does not use the least significant bit in the time-slot. If
the logical line is configured for DS0-A operation, rate adaptions of
9.6 Kbps and 19.2 Kbps may be configured.ro Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.61 |
wfLogicalLineBertModeEnables BERT testing on a logical line level. This feature is
only supported by the QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.62 |
wfLogicalLineBertTestPatternTest pattern for BERT. This feature is only supported by the
QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.63 |
wfLogicalLineAcceptFracLoopCodeAllows logical line to accept Fractional T1 Loop Code. This
feature is only supported by the QMCT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.64 |
wfLogicalLineDS0AStatusIndicates logical line set to T1 DS0-A Subrates. This
feature is only supported by the QMCT1.ro Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.65 |
wfLogicalLineNRZIEnableAllows logical line to accept T1 NRZI encoding on logical
Line. This feature is only supported by the QMRT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.66 |
wfLogicalLineNRZITypeDefines logical line to T1 NRZI encoding as either Mark or
Space on logical Line. This feature is only supported by the QMRT1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.6.1.67 |
wfDs1E1FracTableThe DS1E1 fractional table identifies for each time-slot, the Logical
Line to which the time-slot is currently bound. SEQUENCE OF WfDs1E1FracEntry .1.3.6.1.4.1.18.3.4.9.7 |
wfDs1E1FracEntryAn entry in the DS1E1 Fractional Table WfDs1E1FracEntry .1.3.6.1.4.1.18.3.4.9.7.1 |
wfDs1E1FracDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.7.1.1 |
wfDs1E1FracPortLineNumberLine number with a zero channel number field. Identifies the portro INTEGER .1.3.6.1.4.1.18.3.4.9.7.1.2 |
wfDs1E1FracNumberThe time slot to be assignedro INTEGER .1.3.6.1.4.1.18.3.4.9.7.1.3 |
wfDs1E1FracLogicalLineIndexThis time slot is assigned to the Logical Line identified by this
attribute.rw INTEGER .1.3.6.1.4.1.18.3.4.9.7.1.4 |
wfDs1E1FracActualLogicalLineIndexThis time slot can be manipulated by ISDN PRI Multi-Rate service.
This is the logical line to which the time slot is currently
allocated.ro INTEGER .1.3.6.1.4.1.18.3.4.9.7.1.5 |
wfDs1E1CurrentTableCurrent AT&T FDL stats table. SEQUENCE OF WfDs1E1CurrentEntry .1.3.6.1.4.1.18.3.4.9.10 |
wfDs1E1CurrentEntryAn entry in the DS1E1 Current table WfDs1E1CurrentEntry .1.3.6.1.4.1.18.3.4.9.10.1 |
wfDs1E1CurrentPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.10.1.1 |
wfDs1E1CurrentESsThe number of Errored Seconds, encountered by a DS1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.2 |
wfDs1E1CurrentSESsThe number of Severely Errored Seconds encountered by a DS1 interface
in the current 15 minute interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.3 |
wfDs1E1CurrentSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1
interface in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.4 |
wfDs1E1CurrentUASsThe number of Unavailable Seconds encountered by a DS1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.5 |
wfDs1E1CurrentCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.6 |
wfDs1E1CurrentPCVsThe number of Path Coding Violations encountered by a DS1 interface in the
current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.7 |
wfDs1E1CurrentLESsThe number of Line Errored Seconds encountered by a DS1 interface in the
current 15 minute interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.8 |
wfDs1E1CurrentBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.9 |
wfDs1E1CurrentDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in
the current 15 minute interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.10 |
wfDs1E1CurrentLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
the current 15 minute interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.11 |
wfDs1E1CurrentSASsThe number of seconds, within the current 15 minute interval,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.12 |
wfDs1E1CurrentAISSsThe number of seconds, within the current 15 minute interval,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.13 |
wfDs1E1CurrentFCsThe number of Path Failure Count error events detected
in the current 15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.10.1.14 |
wfDs1E1CurrentTimeElapsedThe number of seconds that have elapsed since the beginning of the
current error-measurement period.ro INTEGER .1.3.6.1.4.1.18.3.4.9.10.1.15 |
wfDs1E1CurrentValidIntervalsThe number of previous intervals for which valid data was collected. The
value will be 96 unless the interface was brought on-line within the last
24 hours, in which case the value will be the number of complete 15 minute
intervals the since interface has been online.ro INTEGER .1.3.6.1.4.1.18.3.4.9.10.1.16 |
wfDs1E1CurrentValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.10.1.17 |
wfDs1E1IntervalTableAT&T Interval stats SEQUENCE OF WfDs1E1IntervalEntry .1.3.6.1.4.1.18.3.4.9.11 |
wfDs1E1IntervalEntryAn entry in the DS1E1 Interval table WfDs1E1IntervalEntry .1.3.6.1.4.1.18.3.4.9.11.1 |
wfDs1E1IntervalPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.11.1.1 |
wfDs1E1IntervalNumberA number between 1 and 96, where 1 is the most recently completed 15 minute
interval and 96 is the least recently completed 15 minutes interval (assuming
that all 96 intervals are valid).ro INTEGER .1.3.6.1.4.1.18.3.4.9.11.1.2 |
wfDs1E1IntervalESsThe number of Errored Seconds, encountered by a DS1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.3 |
wfDs1E1IntervalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in one
of the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.4 |
wfDs1E1IntervalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface
in one of the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.5 |
wfDs1E1IntervalUASsThe number of Unavailable Seconds encountered by a DS1 interface in one of the
previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.6 |
wfDs1E1IntervalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in one
of the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.7 |
wfDs1E1IntervalPCVsThe number of Path Coding Violations encountered by a DS1 interface in one of
the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.8 |
wfDs1E1IntervalLESsThe number of Line Errored Seconds encountered by a DS1 interface in one of
the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.9 |
wfDs1E1IntervalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in
one of the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.10 |
wfDs1E1IntervalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in one of
the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.11 |
wfDs1E1IntervalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
one of the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.12 |
wfDs1E1IntervalSASsThe number of seconds, in one of the previous 15 minute intervals,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.13 |
wfDs1E1IntervalAISSsThe number of seconds, in one of the previous 15 minute intervals,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.14 |
wfDs1E1IntervalFCsThe number of Path Failure Count error events detected
one of the previous 15 minute intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.11.1.15 |
wfDs1E1IntervalValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.11.1.16 |
wfDs1E1TotalTableAT&T Total stats Table SEQUENCE OF WfDs1E1TotalEntry .1.3.6.1.4.1.18.3.4.9.12 |
wfDs1E1TotalEntryAn entry in the DS1E1 Total table WfDs1E1TotalEntry .1.3.6.1.4.1.18.3.4.9.12.1 |
wfDs1E1TotalPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.12.1.1 |
wfDs1E1TotalESsThe number of Errored Seconds, encountered by a DS1 interface in the current
15 minute interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.2 |
wfDs1E1TotalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in the
previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.3 |
wfDs1E1TotalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface
in the previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.4 |
wfDs1E1TotalUASsThe number of Unavailable Seconds encountered by a DS1 interface in the
previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.5 |
wfDs1E1TotalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the
previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.6 |
wfDs1E1TotalPCVsThe number of Path Coding Violations encountered by a DS1 interface in the
previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.7 |
wfDs1E1TotalLESsThe number of Line Errored Seconds encountered by a DS1 interface in the
previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.8 |
wfDs1E1TotalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface
in the previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.9 |
wfDs1E1TotalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the
previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.10 |
wfDs1E1TotalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
the previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.11 |
wfDs1E1TotalSASsThe number of seconds, in the previous 24-hour interval,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.12 |
wfDs1E1TotalAISSsThe number of seconds, in the previous 24-hour interval,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.13 |
wfDs1E1TotalFCsThe number of Path Failure Count error events detected
in the previous 24-hour interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.12.1.14 |
wfDs1E1TotalValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.12.1.15 |
wfDs1E1BertStatsTableBERT Counter line record - This table contains the
statistics for the BERT tester. SEQUENCE OF WfDs1E1BertStatsEntry .1.3.6.1.4.1.18.3.4.9.14 |
wfDs1E1BertStatsEntryAn entry in the DS1E1 Bert Stats table WfDs1E1BertStatsEntry .1.3.6.1.4.1.18.3.4.9.14.1 |
wfDs1E1BertStatsPortLineNumberInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.14.1.1 |
wfDs1E1BertStatsBitErrorsBit error counterro Counter .1.3.6.1.4.1.18.3.4.9.14.1.2 |
wfDs1E1BertStatsBitsBit counterro Counter .1.3.6.1.4.1.18.3.4.9.14.1.3 |
wfDs1E1CurrentFramerStatsTableFramer stats line record - This table contains the
statistics for the Framer tester. SEQUENCE OF WfDs1E1CurrentFramerStatsEntry .1.3.6.1.4.1.18.3.4.9.15 |
wfDs1E1CurrentFramerStatsEntryAn entry in the DS1E1 CurrentFramer Stats table WfDs1E1CurrentFramerStatsEntry .1.3.6.1.4.1.18.3.4.9.15.1 |
wfDs1E1CurrentFramerStatsPortLineNumberInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.15.1.1 |
wfDs1E1CurrentFramerStatsMediaTypeThe media type is either T1 or E1ro Enumeration .1.3.6.1.4.1.18.3.4.9.15.1.2 |
wfDs1E1CurrentFramerStatsBpvCountsbipolar violations counterro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.3 |
wfDs1E1CurrentFramerStatsCrc4CountsCRC4 error counterro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.4 |
wfDs1E1CurrentFramerStatsFebeCountsFar End Block Error counterro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.5 |
wfDs1E1CurrentFramerStatsOofCountsOut of frame error counts. Out of frame is declared when at least two
of four (or five) consecutive framing bits are in error.ro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.6 |
wfDs1E1CurrentFramerStatsFeCountsFraming error counts. In ESF mode this is the number of errored
superframes while in SF mode it is the number of incorrect framing
bits.ro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.7 |
wfDs1E1CurrentFramerStatsLossFrameFailuresLoss of frame failures. These occur when an out of frame event or
carrier loss happensro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.8 |
wfDs1E1CurrentFramerStatsLossSignalFailuresLoss of Signal failure happen when receive carrier is lostro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.9 |
wfDs1E1CurrentFramerStatsAlarmIndicationFailuresAlarm Indication signal Failures occur when 2 consecutive frames have
less than 3 zeros (total) in the data stream.ro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.10 |
wfDs1E1CurrentFramerStatsRemoteAlarmFailuresRemote alarm failure happen when the yellow alarm is detectedro Gauge .1.3.6.1.4.1.18.3.4.9.15.1.11 |
wfDs1E1TotalFramerStatsTableTotal framer stats line record - This table contains the
statistics for the Framer. SEQUENCE OF WfDs1E1TotalFramerStatsEntry .1.3.6.1.4.1.18.3.4.9.16 |
wfDs1E1TotalFramerStatsEntryAn entry in the DS1E1 TotalFramer Stats table WfDs1E1TotalFramerStatsEntry .1.3.6.1.4.1.18.3.4.9.16.1 |
wfDs1E1TotalFramerStatsPortLineNumberInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.16.1.1 |
wfDs1E1TotalFramerStatsMediaTypebipolar violations counterro Enumeration .1.3.6.1.4.1.18.3.4.9.16.1.2 |
wfDs1E1TotalFramerStatsValidIntervalsThe number of valid 15 minutes intervals in the last 24-hour periodro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.3 |
wfDs1E1TotalFramerStatsBpvCountsbipolar violations counterro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.4 |
wfDs1E1TotalFramerStatsCrc4CountsCRC4 error counterro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.5 |
wfDs1E1TotalFramerStatsFebeCountsFar End Block Error counterro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.6 |
wfDs1E1TotalFramerStatsOofCountsOut of frame error counts. Out of frame is declared when at least two
of four (or five) consecutive framing bits are in error.ro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.7 |
wfDs1E1TotalFramerStatsFeCountsFraming error counts. In ESF mode this is the number of errored
superframes while in SF mode it is the number of incorrect framing
bits.ro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.8 |
wfDs1E1TotalFramerStatsLossFrameFailuresLoss of frame failures. These occur when an out of frame event or
carrier loss happensro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.9 |
wfDs1E1TotalFramerStatsLossSignalFailuresLoss of Signal failure happen when receive carrier is lostro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.10 |
wfDs1E1TotalFramerStatsAlarmIndicationFailuresAlarm Indication signal Failures occur when 2 consecutive frames have
less than 3 zeros (total) in the data stream.ro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.11 |
wfDs1E1TotalFramerStatsRemoteAlarmFailuresRemote alarm failure happen when the yellow alarm is detectedro Gauge .1.3.6.1.4.1.18.3.4.9.16.1.12 |
wfDs1E1IntervalFramerStatsTableInterval Framer stats line record - This table contains the
statistics for the Framer. SEQUENCE OF WfDs1E1IntervalFramerStatsEntry .1.3.6.1.4.1.18.3.4.9.17 |
wfDs1E1IntervalFramerStatsEntryAn entry in the DS1E1 IntervalFramer Stats table WfDs1E1IntervalFramerStatsEntry .1.3.6.1.4.1.18.3.4.9.17.1 |
wfDs1E1IntervalFramerStatsPortLineNumberInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.17.1.1 |
wfDs1E1IntervalFramerStatsIntervalNumberInstance ID interval number, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.17.1.2 |
wfDs1E1IntervalFramerStatsMediaTypeMedia Type, T1 or E1ro Enumeration .1.3.6.1.4.1.18.3.4.9.17.1.3 |
wfDs1E1IntervalFramerStatsBpvCountsbipolar violations counterro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.4 |
wfDs1E1IntervalFramerStatsCrc4CountsCRC4 error counterro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.5 |
wfDs1E1IntervalFramerStatsFebeCountsFar End Block Error counterro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.6 |
wfDs1E1IntervalFramerStatsOofCountsOut of frame error counts. Out of frame is declared when at least two
of four (or five) consecutive framing bits are in error.ro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.7 |
wfDs1E1IntervalFramerStatsFeCountsFraming error counts. In ESF mode this is the number of errored
superframes while in SF mode it is the number of incorrect framing
bits.ro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.8 |
wfDs1E1IntervalFramerStatsLossFrameFailuresLoss of frame failures. These occur when an out of frame event or
carrier loss happensro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.9 |
wfDs1E1IntervalFramerStatsLossSignalFailuresLoss of Signal failure happen when receive carrier is lostro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.10 |
wfDs1E1IntervalFramerStatsAlarmIndicationFailuresAlarm Indication signal Failures occur when 2 consecutive frames have
less than 3 zeros (total) in the data stream.ro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.11 |
wfDs1E1IntervalFramerStatsRemoteAlarmFailuresRemote alarm failure happen when the yellow alarm is detectedro Gauge .1.3.6.1.4.1.18.3.4.9.17.1.12 |
wfDs1E1ClockTableDS1E1 clock record - Contains Clock parameters supporting
the QMCT1. SEQUENCE OF WfDs1E1ClockEntry .1.3.6.1.4.1.18.3.4.9.18 |
wfDs1E1ClockEntryAn entry in the DS1E1 clock table WfDs1E1ClockEntry .1.3.6.1.4.1.18.3.4.9.18.1 |
wfDs1E1ClockDeleteCreate/Delete attributerw Enumeration .1.3.6.1.4.1.18.3.4.9.18.1.1 |
wfDs1E1ClockPortLineNumberThe index ID for this record. It is the line number assigned
to a port in the wfDs1E1PortMapEntry for a port.connector pair.
Its channel field should be 0.ro INTEGER .1.3.6.1.4.1.18.3.4.9.18.1.2 |
wfDs1E1ClockPrimaryClockSpecifies the primary source for transmit timing for this
port. The options for timing source are internal timing
source, loop timing from either port and an external timing
source. Note that the bit defines are equal to the Timing
Register bit definitions plus 1.rw Enumeration .1.3.6.1.4.1.18.3.4.9.18.1.3 |
wfDs1E1ClockSecondaryClockSpecifies the secondary source for transmit timing for this
port.rw Enumeration .1.3.6.1.4.1.18.3.4.9.18.1.4 |
wfDs1E1ClockCurrentClockSpecifies the current source for transmit timing for this
port.ro Enumeration .1.3.6.1.4.1.18.3.4.9.18.1.5 |
wfDs1E1ClockLoopClockOperationalSpecifies this ports Loop Clock Status, PRESENT (UP) or
NOTPRESENT (DOWN).ro Enumeration .1.3.6.1.4.1.18.3.4.9.18.1.6 |
wfDs1E1ClockExtClockOperationalIndicates whether the External clock is operational.ro Enumeration .1.3.6.1.4.1.18.3.4.9.18.1.7 |
wfDs1E1LineQueStatTableThis file describes the MIBS for getting Line Queue Stats SEQUENCE OF WfDs1E1LineQueStatEntry .1.3.6.1.4.1.18.3.4.9.20 |
wfDs1E1LineQueStatEntryAn entry in the Queue Base table WfDs1E1LineQueStatEntry .1.3.6.1.4.1.18.3.4.9.20.1 |
wfDs1E1LineQueStatPortLineNumberInstance ID PortLineNumberro INTEGER .1.3.6.1.4.1.18.3.4.9.20.1.1 |
wfDs1E1LineQueStatLineIndexInstance Line Numberro INTEGER .1.3.6.1.4.1.18.3.4.9.20.1.2 |
wfDs1E1LineQueStatQueueIndexQueue Index, matches that of wfQosServPkgQueCfgQueueIndex or
one for best effort.ro INTEGER .1.3.6.1.4.1.18.3.4.9.20.1.3 |
wfDs1E1LineQueStatTxOctetsNumber of Transmit Octets received by the Queue without errorro Counter .1.3.6.1.4.1.18.3.4.9.20.1.4 |
wfDs1E1LineQueStatTxPacketsNumber of Transmit Packets received by the Queue without errorro Counter .1.3.6.1.4.1.18.3.4.9.20.1.5 |
wfDs1E1LineQueStatTxDropsNumber of Transmit Packets Dropped by the Queuero Counter .1.3.6.1.4.1.18.3.4.9.20.1.6 |
wfDs1E1LineCfgTableContains configuration parameters for Channel specific
Fractional T1/E1. SEQUENCE OF WfDs1E1LineCfgEntry .1.3.6.1.4.1.18.3.4.9.21 |
wfDs1E1LineCfgEntryAn entry in the LOGICAL_LINE table WfDs1E1LineCfgEntry .1.3.6.1.4.1.18.3.4.9.21.1 |
wfDs1E1LineCfgDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.1 |
wfDs1E1LineCfgDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.2 |
wfDs1E1LineCfgStateLine Driver state variablero Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.3 |
wfDs1E1LineLastChangeThe value of sysUpTime at the time the interface entered
its current operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.4.9.21.1.4 |
wfDs1E1LineCfgPortLineNumberInstance ID PortLineNumber, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.21.1.5 |
wfDs1E1LineCfgIndexIndex for this line instance, filled in by driver.
The index corresponds to the position of the
circuit on the port.ro INTEGER .1.3.6.1.4.1.18.3.4.9.21.1.6 |
wfDs1E1LineCfgIfIndexIfTable Index for this line instance,
filled in by driver.ro INTEGER .1.3.6.1.4.1.18.3.4.9.21.1.7 |
wfDs1E1LineCfgCctCircuit number for this line instancerw INTEGER .1.3.6.1.4.1.18.3.4.9.21.1.8 |
wfDs1E1LineCfgLineNumberLineNumber for this logical line instance. This is the same line number
contained in the PORT_TABLE with the channel field nonzero.rw INTEGER .1.3.6.1.4.1.18.3.4.9.21.1.9 |
wfDs1E1LineCfgQosServicePkgQueue Service Package to be used for this linerw INTEGER .1.3.6.1.4.1.18.3.4.9.21.1.10 |
wfDs1E1LineCfgTimeSlotAssignBitmask of timeslot(s) assigned to this line
MSB == Bit 31, LSB == Bit 0
TimeSlot 1 == Bit 1
TimeSlot 24 == Bit 24 (T1)
TimeSlot 31 == Bit 31 (E1)rw INTEGER .1.3.6.1.4.1.18.3.4.9.21.1.11 |
wfDs1E1LineCfgActualTimeSlotAssignLists the time-slots which constitute this channel. Read only
attribute that contains a list of time-slots from 1 to 31
used by the channelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.4.9.21.1.12 |
wfDs1E1LineCfgWanProtocolWAN protocol selection is provided via this parameter. The
supported protocols can be selected per circuit.rw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.13 |
wfDs1E1LineCfgRateAdaptionDetermines the number of bits and their bit positions
within the time-slot. 64k selection uses all 8 bits in
the time-slot. The two 56k selections use 7 of the 8
bits in the time-slot. 56k_MSB does not use the most
significant bit and 56k_LSB does not use the least
significant bit in the time-slot.rw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.14 |
wfDs1E1LineCfgIFTFDetermines the Interframe time fill character to be
transmitted by the HDLC Controller. In case of IFTF_FLAGS,
0x7E is sent and in case of IFTF_IDLES 0xff is sent as the
interframe timefill characters.rw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.15 |
wfDs1E1LineCfgCRCSizeDetermines the CRC Size. When CRC32 is selected a 32 bit
CRC is appended to the frame being transmitted and a 32
bit CRC check is performed on the received frame. When
CRC16 is selected, a 16 bit CRC is appended to the
transmitted frame and a 16 bit CRC is performed. on the
received frame.rw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.16 |
wfDs1E1LineCfgMtuSpecifies the largest frame size that can be received by the logical line.
Anything larger than the MTU will be discarded.rw INTEGER .1.3.6.1.4.1.18.3.4.9.21.1.17 |
wfDs1E1LineCfgBertModeEnables Bit Error Rate Testing (BERT) on a logical line level.rw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.18 |
wfDs1E1LineCfgBertTestPatternWhen a line is in BERT mode, it is capable of generating
a set of known patterns. This paramater selects between those
patternsrw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.19 |
wfDs1E1LineCfgFractionalLoopbackAny Ds1E1 Line on this T1/E1 port is capable of being put into
loopback through hardware, i.e. data coming into that circuit
from the wire is mirrorred back onto the wire. This parameter
enables or disables this loopback feature on any circuit.rw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.20 |
wfDs1E1LineCfgAcceptFracLoopCodeAllows logical line to accept Fractional T1 Loop Code sent
from a Remote Device.rw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.21 |
wfDs1E1LineCfgManagerMethodThis attribute has no affect on the Hardware configuration.
This attribute is purely for any Network Management Tool
to determine whether it configured the Logical Line as a
Clear Channel T1 or as a Fractional T1 with Timeslots.rw Enumeration .1.3.6.1.4.1.18.3.4.9.21.1.22 |
wfDs1E1LineStatTableContains statistics for Channel specific Fractional T1/E1. SEQUENCE OF WfDs1E1LineStatEntry .1.3.6.1.4.1.18.3.4.9.22 |
wfDs1E1LineStatEntryAn entry in the LOGICAL_LINE table WfDs1E1LineStatEntry .1.3.6.1.4.1.18.3.4.9.22.1 |
wfDs1E1LineStatPortLineNumberInstance ID PortLineNumber, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.4.9.22.1.1 |
wfDs1E1LineStatIndexIndex for this line instance, filled in by driver.
The index corresponds to the position of the
circuit, from 1 to 31, on the port.ro INTEGER .1.3.6.1.4.1.18.3.4.9.22.1.2 |
wfDs1E1LineStatRxOctetsNumber of octets received without errorro Counter .1.3.6.1.4.1.18.3.4.9.22.1.3 |
wfDs1E1LineStatTxOctetsNumber of octets transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.9.22.1.4 |
wfDs1E1LineStatRxFramesNumber of frames received without errorro Counter .1.3.6.1.4.1.18.3.4.9.22.1.5 |
wfDs1E1LineStatTxFramesNumber of frames transmitted without errorro Counter .1.3.6.1.4.1.18.3.4.9.22.1.6 |
wfDs1E1LineStatRxErrorsNumber of receive errorsro Counter .1.3.6.1.4.1.18.3.4.9.22.1.7 |
wfDs1E1LineStatTxErrorsNumber of transmission errorsro Counter .1.3.6.1.4.1.18.3.4.9.22.1.8 |
wfDs1E1LineStatRxDropPacketsNumber of Rx frames droppedro Counter .1.3.6.1.4.1.18.3.4.9.22.1.9 |
wfDs1E1LineStatTxDropPacketsNumber of Tx frames droppedro Counter .1.3.6.1.4.1.18.3.4.9.22.1.10 |
wfDs1E1LineStatTxUnderflowsNumber of Tx frames dropped due to Transmit underflowro Counter .1.3.6.1.4.1.18.3.4.9.22.1.11 |
wfDs1E1LineStatRxOverflowsNumber of Rx frames dropped due to Receive overflowro Counter .1.3.6.1.4.1.18.3.4.9.22.1.12 |
wfDs1E1LineStatRxShortFramesNumber of short frames received whose length is either 1
or 2 data bytes.ro Counter .1.3.6.1.4.1.18.3.4.9.22.1.13 |
wfDs1E1LineStatRxCRCErrorsCRC error receivedro Counter .1.3.6.1.4.1.18.3.4.9.22.1.14 |
wfDs1E1LineStatRxNonOctetBitsNon-Octet bits received in framero Counter .1.3.6.1.4.1.18.3.4.9.22.1.15 |
wfDs1E1LineStatRxLongFramesFrame longer than MFL receivedro Counter .1.3.6.1.4.1.18.3.4.9.22.1.16 |
wfDs1E1LineStatRxAbortFramesAborted frame receivedro Counter .1.3.6.1.4.1.18.3.4.9.22.1.17 |
wfDs1E1DayCurrentTableCurrent AT&T FDL stats table. SEQUENCE OF WfDs1E1DayCurrentEntry .1.3.6.1.4.1.18.3.4.9.24 |
wfDs1E1DayCurrentEntryAn entry in the DS1E1 Current table WfDs1E1DayCurrentEntry .1.3.6.1.4.1.18.3.4.9.24.1 |
wfDs1E1DayCurrentPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.24.1.1 |
wfDs1E1DayCurrentESsThe number of Errored Seconds, encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.2 |
wfDs1E1DayCurrentSESsThe number of Severely Errored Seconds encountered by a DS1 interface
in the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.3 |
wfDs1E1DayCurrentSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1
interface in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.4 |
wfDs1E1DayCurrentUASsThe number of Unavailable Seconds encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.5 |
wfDs1E1DayCurrentCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.6 |
wfDs1E1DayCurrentPCVsThe number of Path Coding Violations encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.7 |
wfDs1E1DayCurrentLESsThe number of Line Errored Seconds encountered by a DS1 interface in the
current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.8 |
wfDs1E1DayCurrentBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface
in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.9 |
wfDs1E1DayCurrentDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in
the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.10 |
wfDs1E1DayCurrentLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.11 |
wfDs1E1DayCurrentSASsThe number of seconds, within the current day interval,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.12 |
wfDs1E1DayCurrentAISSsThe number of seconds, within the current day interval,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.13 |
wfDs1E1DayCurrentFCsThe number of Path Failure Count error events detected
in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.24.1.14 |
wfDs1E1DayCurrentTimeElapsedThe number of seconds that have elapsed since the beginning of the
current error-measurement period.ro INTEGER .1.3.6.1.4.1.18.3.4.9.24.1.15 |
wfDs1E1DayCurrentValidIntervalsThe number of previous intervals for which valid data was collected. The
value will be 8 unless the interface was brought on-line within the last
8 days, in which case the value will be the number of complete day
intervals the since interface has been online.ro INTEGER .1.3.6.1.4.1.18.3.4.9.24.1.16 |
wfDs1E1DayCurrentValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.24.1.17 |
wfDs1E1DayIntervalTableAT&T Interval stats SEQUENCE OF WfDs1E1DayIntervalEntry .1.3.6.1.4.1.18.3.4.9.25 |
wfDs1E1DayIntervalEntryAn entry in the DS1E1 Interval table WfDs1E1DayIntervalEntry .1.3.6.1.4.1.18.3.4.9.25.1 |
wfDs1E1DayIntervalPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.25.1.1 |
wfDs1E1DayIntervalNumberA number between 1 and 8, where 1 is the most recently completed day
interval and 8 is the least recently completed day interval (assuming
that all 8 intervals are valid).ro INTEGER .1.3.6.1.4.1.18.3.4.9.25.1.2 |
wfDs1E1DayIntervalESsThe number of Errored Seconds, encountered by a DS1 interface in the current
day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.3 |
wfDs1E1DayIntervalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in one
of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.4 |
wfDs1E1DayIntervalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface
in one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.5 |
wfDs1E1DayIntervalUASsThe number of Unavailable Seconds encountered by a DS1 interface in one of the
previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.6 |
wfDs1E1DayIntervalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in one
of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.7 |
wfDs1E1DayIntervalPCVsThe number of Path Coding Violations encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.8 |
wfDs1E1DayIntervalLESsThe number of Line Errored Seconds encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.9 |
wfDs1E1DayIntervalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.10 |
wfDs1E1DayIntervalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.11 |
wfDs1E1DayIntervalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.12 |
wfDs1E1DayIntervalSASsThe number of seconds, in one of the previous day intervals,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.13 |
wfDs1E1DayIntervalAISSsThe number of seconds, in one of the previous day intervals,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.14 |
wfDs1E1DayIntervalFCsThe number of Path Failure Count error events detected
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.25.1.15 |
wfDs1E1DayIntervalValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.25.1.16 |
wfDs1E1DayTotalTableAT&T Total stats Table SEQUENCE OF WfDs1E1DayTotalEntry .1.3.6.1.4.1.18.3.4.9.26 |
wfDs1E1DayTotalEntryAn entry in the DS1E1 Total table WfDs1E1DayTotalEntry .1.3.6.1.4.1.18.3.4.9.26.1 |
wfDs1E1DayTotalPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.26.1.1 |
wfDs1E1DayTotalESsThe number of Errored Seconds, encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.2 |
wfDs1E1DayTotalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.3 |
wfDs1E1DayTotalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.4 |
wfDs1E1DayTotalUASsThe number of Unavailable Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.5 |
wfDs1E1DayTotalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.6 |
wfDs1E1DayTotalPCVsThe number of Path Coding Violations encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.7 |
wfDs1E1DayTotalLESsThe number of Line Errored Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.8 |
wfDs1E1DayTotalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.9 |
wfDs1E1DayTotalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.10 |
wfDs1E1DayTotalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.11 |
wfDs1E1DayTotalSASsThe number of seconds, in the previous 8 day interval,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.12 |
wfDs1E1DayTotalAISSsThe number of seconds, in the previous 8 day interval,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.13 |
wfDs1E1DayTotalFCsThe number of Path Failure Count error events detected
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.26.1.14 |
wfDs1E1DayTotalValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.26.1.15 |
wfDs1E1FarEndCurrentTableCurrent AT&T FDL stats table. SEQUENCE OF WfDs1E1FarEndCurrentEntry .1.3.6.1.4.1.18.3.4.9.27 |
wfDs1E1FarEndCurrentEntryAn entry in the DS1E1 Current table WfDs1E1FarEndCurrentEntry .1.3.6.1.4.1.18.3.4.9.27.1 |
wfDs1E1FarEndCurrentPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.27.1.1 |
wfDs1E1FarEndCurrentESsThe number of Errored Seconds, encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.2 |
wfDs1E1FarEndCurrentSESsThe number of Severely Errored Seconds encountered by a DS1 interface
in the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.3 |
wfDs1E1FarEndCurrentSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1
interface in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.4 |
wfDs1E1FarEndCurrentUASsThe number of Unavailable Seconds encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.5 |
wfDs1E1FarEndCurrentCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.6 |
wfDs1E1FarEndCurrentPCVsThe number of Path Coding Violations encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.7 |
wfDs1E1FarEndCurrentLESsThe number of Line Errored Seconds encountered by a DS1 interface in the
current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.8 |
wfDs1E1FarEndCurrentBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface
in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.9 |
wfDs1E1FarEndCurrentDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in
the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.10 |
wfDs1E1FarEndCurrentLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.11 |
wfDs1E1FarEndCurrentSASsThe number of seconds, within the current day interval,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.12 |
wfDs1E1FarEndCurrentAISSsThe number of seconds, within the current day interval,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.13 |
wfDs1E1FarEndCurrentFCsThe number of Path Failure Count error events detected
in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.27.1.14 |
wfDs1E1FarEndCurrentTimeElapsedThe number of seconds that have elapsed since the beginning of the
current error-measurement period.ro INTEGER .1.3.6.1.4.1.18.3.4.9.27.1.15 |
wfDs1E1FarEndCurrentValidIntervalsThe number of previous intervals for which valid data was collected. The
value will be 8 unless the interface was brought on-line within the last
8 days, in which case the value will be the number of complete day
intervals the since interface has been online.ro INTEGER .1.3.6.1.4.1.18.3.4.9.27.1.16 |
wfDs1E1FarEndCurrentValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.27.1.17 |
wfDs1E1FarEndIntervalTableAT&T Interval stats SEQUENCE OF WfDs1E1FarEndIntervalEntry .1.3.6.1.4.1.18.3.4.9.28 |
wfDs1E1FarEndIntervalEntryAn entry in the DS1E1 Interval table WfDs1E1FarEndIntervalEntry .1.3.6.1.4.1.18.3.4.9.28.1 |
wfDs1E1FarEndIntervalPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.28.1.1 |
wfDs1E1FarEndIntervalNumberA number between 1 and 8, where 1 is the most recently completed day
interval and 8 is the least recently completed day interval (assuming
that all 8 intervals are valid).ro INTEGER .1.3.6.1.4.1.18.3.4.9.28.1.2 |
wfDs1E1FarEndIntervalESsThe number of Errored Seconds, encountered by a DS1 interface in the current
day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.3 |
wfDs1E1FarEndIntervalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in one
of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.4 |
wfDs1E1FarEndIntervalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface
in one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.5 |
wfDs1E1FarEndIntervalUASsThe number of Unavailable Seconds encountered by a DS1 interface in one of the
previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.6 |
wfDs1E1FarEndIntervalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in one
of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.7 |
wfDs1E1FarEndIntervalPCVsThe number of Path Coding Violations encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.8 |
wfDs1E1FarEndIntervalLESsThe number of Line Errored Seconds encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.9 |
wfDs1E1FarEndIntervalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.10 |
wfDs1E1FarEndIntervalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.11 |
wfDs1E1FarEndIntervalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.12 |
wfDs1E1FarEndIntervalSASsThe number of seconds, in one of the previous day intervals,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.13 |
wfDs1E1FarEndIntervalAISSsThe number of seconds, in one of the previous day intervals,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.14 |
wfDs1E1FarEndIntervalFCsThe number of Path Failure Count error events detected
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.28.1.15 |
wfDs1E1FarEndIntervalValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.28.1.16 |
wfDs1E1FarEndTotalTableAT&T Total stats Table SEQUENCE OF WfDs1E1FarEndTotalEntry .1.3.6.1.4.1.18.3.4.9.29 |
wfDs1E1FarEndTotalEntryAn entry in the DS1E1 Total table WfDs1E1FarEndTotalEntry .1.3.6.1.4.1.18.3.4.9.29.1 |
wfDs1E1FarEndTotalPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.29.1.1 |
wfDs1E1FarEndTotalESsThe number of Errored Seconds, encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.2 |
wfDs1E1FarEndTotalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.3 |
wfDs1E1FarEndTotalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.4 |
wfDs1E1FarEndTotalUASsThe number of Unavailable Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.5 |
wfDs1E1FarEndTotalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.6 |
wfDs1E1FarEndTotalPCVsThe number of Path Coding Violations encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.7 |
wfDs1E1FarEndTotalLESsThe number of Line Errored Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.8 |
wfDs1E1FarEndTotalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.9 |
wfDs1E1FarEndTotalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.10 |
wfDs1E1FarEndTotalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.11 |
wfDs1E1FarEndTotalSASsThe number of seconds, in the previous 8 day interval,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.12 |
wfDs1E1FarEndTotalAISSsThe number of seconds, in the previous 8 day interval,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.13 |
wfDs1E1FarEndTotalFCsThe number of Path Failure Count error events detected
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.29.1.14 |
wfDs1E1FarEndTotalValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.29.1.15 |
wfDs1E1FarEndDayCurrentTableCurrent AT&T FDL stats table. SEQUENCE OF WfDs1E1FarEndDayCurrentEntry .1.3.6.1.4.1.18.3.4.9.30 |
wfDs1E1FarEndDayCurrentEntryAn entry in the DS1E1 Current table WfDs1E1FarEndDayCurrentEntry .1.3.6.1.4.1.18.3.4.9.30.1 |
wfDs1E1FarEndDayCurrentPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.30.1.1 |
wfDs1E1FarEndDayCurrentESsThe number of Errored Seconds, encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.2 |
wfDs1E1FarEndDayCurrentSESsThe number of Severely Errored Seconds encountered by a DS1 interface
in the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.3 |
wfDs1E1FarEndDayCurrentSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1
interface in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.4 |
wfDs1E1FarEndDayCurrentUASsThe number of Unavailable Seconds encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.5 |
wfDs1E1FarEndDayCurrentCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.6 |
wfDs1E1FarEndDayCurrentPCVsThe number of Path Coding Violations encountered by a DS1 interface in the
current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.7 |
wfDs1E1FarEndDayCurrentLESsThe number of Line Errored Seconds encountered by a DS1 interface in the
current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.8 |
wfDs1E1FarEndDayCurrentBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface
in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.9 |
wfDs1E1FarEndDayCurrentDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in
the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.10 |
wfDs1E1FarEndDayCurrentLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
the current day interval.'ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.11 |
wfDs1E1FarEndDayCurrentSASsThe number of seconds, within the current day interval,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.12 |
wfDs1E1FarEndDayCurrentAISSsThe number of seconds, within the current day interval,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.13 |
wfDs1E1FarEndDayCurrentFCsThe number of Path Failure Count error events detected
in the current day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.30.1.14 |
wfDs1E1FarEndDayCurrentTimeElapsedThe number of seconds that have elapsed since the beginning of the
current error-measurement period.ro INTEGER .1.3.6.1.4.1.18.3.4.9.30.1.15 |
wfDs1E1FarEndDayCurrentValidIntervalsThe number of previous intervals for which valid data was collected. The
value will be 8 unless the interface was brought on-line within the last
8 days, in which case the value will be the number of complete day
intervals the since interface has been online.ro INTEGER .1.3.6.1.4.1.18.3.4.9.30.1.16 |
wfDs1E1FarEndDayCurrentValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.30.1.17 |
wfDs1E1FarEndDayIntervalTableAT&T Interval stats SEQUENCE OF WfDs1E1FarEndDayIntervalEntry .1.3.6.1.4.1.18.3.4.9.31 |
wfDs1E1FarEndDayIntervalEntryAn entry in the DS1E1 Interval table WfDs1E1FarEndDayIntervalEntry .1.3.6.1.4.1.18.3.4.9.31.1 |
wfDs1E1FarEndDayIntervalPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.31.1.1 |
wfDs1E1FarEndDayIntervalNumberA number between 1 and 8, where 1 is the most recently completed day
interval and 8 is the least recently completed day interval (assuming
that all 8 intervals are valid).ro INTEGER .1.3.6.1.4.1.18.3.4.9.31.1.2 |
wfDs1E1FarEndDayIntervalESsThe number of Errored Seconds, encountered by a DS1 interface in the current
day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.3 |
wfDs1E1FarEndDayIntervalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in one
of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.4 |
wfDs1E1FarEndDayIntervalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface
in one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.5 |
wfDs1E1FarEndDayIntervalUASsThe number of Unavailable Seconds encountered by a DS1 interface in one of the
previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.6 |
wfDs1E1FarEndDayIntervalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in one
of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.7 |
wfDs1E1FarEndDayIntervalPCVsThe number of Path Coding Violations encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.8 |
wfDs1E1FarEndDayIntervalLESsThe number of Line Errored Seconds encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.9 |
wfDs1E1FarEndDayIntervalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.10 |
wfDs1E1FarEndDayIntervalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in one of
the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.11 |
wfDs1E1FarEndDayIntervalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.12 |
wfDs1E1FarEndDayIntervalSASsThe number of seconds, in one of the previous day intervals,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.13 |
wfDs1E1FarEndDayIntervalAISSsThe number of seconds, in one of the previous day intervals,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.14 |
wfDs1E1FarEndDayIntervalFCsThe number of Path Failure Count error events detected
one of the previous day intervals.ro Gauge .1.3.6.1.4.1.18.3.4.9.31.1.15 |
wfDs1E1FarEndDayIntervalValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.31.1.16 |
wfDs1E1FarEndDayTotalTableAT&T Total stats Table SEQUENCE OF WfDs1E1FarEndDayTotalEntry .1.3.6.1.4.1.18.3.4.9.32 |
wfDs1E1FarEndDayTotalEntryAn entry in the DS1E1 Total table WfDs1E1FarEndDayTotalEntry .1.3.6.1.4.1.18.3.4.9.32.1 |
wfDs1E1FarEndDayTotalPortLineNumberThe instance ID that identifies the port. The port line number with a zero
channel number field as found in the port map table.ro INTEGER .1.3.6.1.4.1.18.3.4.9.32.1.1 |
wfDs1E1FarEndDayTotalESsThe number of Errored Seconds, encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.2 |
wfDs1E1FarEndDayTotalSESsThe number of Severely Errored Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.3 |
wfDs1E1FarEndDayTotalSEFSsThe number of Severely Errored Framing Seconds encountered by a DS1 interface
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.4 |
wfDs1E1FarEndDayTotalUASsThe number of Unavailable Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.5 |
wfDs1E1FarEndDayTotalCSSsThe number of Controlled Slip Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.6 |
wfDs1E1FarEndDayTotalPCVsThe number of Path Coding Violations encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.7 |
wfDs1E1FarEndDayTotalLESsThe number of Line Errored Seconds encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.8 |
wfDs1E1FarEndDayTotalBESsThe number of Bursty Errored Seconds (BESs) encountered by a DS1 interface
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.9 |
wfDs1E1FarEndDayTotalDMsThe number of Degraded Minutes (DMs) encountered by a DS1 interface in the
previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.10 |
wfDs1E1FarEndDayTotalLCVsThe number of Line Code Violations (LCVs) encountered by a DS1 interface in
the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.11 |
wfDs1E1FarEndDayTotalSASsThe number of seconds, in the previous 8 day interval,
containing one or more SEFs or AIS defects.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.12 |
wfDs1E1FarEndDayTotalAISSsThe number of seconds, in the previous 8 day interval,
containing one or more AIS defect.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.13 |
wfDs1E1FarEndDayTotalFCsThe number of Path Failure Count error events detected
in the previous 8 day interval.ro Gauge .1.3.6.1.4.1.18.3.4.9.32.1.14 |
wfDs1E1FarEndDayTotalValidFlagIndicates whether this interval reported by the Mib Table is valid or
invalid.ro Enumeration .1.3.6.1.4.1.18.3.4.9.32.1.15 |
wfDs1E1ThrAlrtTableCurrent statistics Alarm Threshold Crossing table. SEQUENCE OF WfDs1E1ThrAlrtEntry .1.3.6.1.4.1.18.3.4.9.33 |
wfDs1E1ThrAlrtEntryAn entry in the DS1E1 Current table WfDs1E1ThrAlrtEntry .1.3.6.1.4.1.18.3.4.9.33.1 |
wfDs1E1ThrAlrtDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.33.1.1 |
wfDs1E1ThrAlrtPortLineNumberThe instance ID that identifies the port.ro INTEGER .1.3.6.1.4.1.18.3.4.9.33.1.2 |
wfDs1E1ThrAlrtESsThe number of Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.3 |
wfDs1E1ThrAlrtSESsThe number of Severely Errored Seconds which must be received prior
to the generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.4 |
wfDs1E1ThrAlrtSEFSsThe number of Severely Errored Framing Seconds which must be received
prior to the generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.5 |
wfDs1E1ThrAlrtUASsThe number of Unavailable Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.6 |
wfDs1E1ThrAlrtCSSsThe number of Controlled Slip Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.7 |
wfDs1E1ThrAlrtPCVsThe number of Path Coding Violations which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.8 |
wfDs1E1ThrAlrtLESsThe number of Line Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.9 |
wfDs1E1ThrAlrtBESsThe number of Bursty Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.10 |
wfDs1E1ThrAlrtDMsThe number of Degraded Minutes which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.11 |
wfDs1E1ThrAlrtLCVsThe number of Line Code Violations which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.12 |
wfDs1E1ThrAlrtSASsThe number of SEF/AIS Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.13 |
wfDs1E1ThrAlrtAISSsThe number of AIS defect Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.14 |
wfDs1E1ThrAlrtFCsThe number of Path Failure Counts which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.33.1.15 |
wfDs1E1DayThrAlrtTableCurrent Day statistics Alarm Threshold Crossing table. SEQUENCE OF WfDs1E1DayThrAlrtEntry .1.3.6.1.4.1.18.3.4.9.34 |
wfDs1E1DayThrAlrtEntryAn entry in the DS1E1 ThrAlrt table WfDs1E1DayThrAlrtEntry .1.3.6.1.4.1.18.3.4.9.34.1 |
wfDs1E1DayThrAlrtDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.34.1.1 |
wfDs1E1DayThrAlrtPortLineNumberThe instance ID that identifies the port.ro INTEGER .1.3.6.1.4.1.18.3.4.9.34.1.2 |
wfDs1E1DayThrAlrtESsThe number of Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.3 |
wfDs1E1DayThrAlrtSESsThe number of Severely Errored Seconds which must be received prior
to the generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.4 |
wfDs1E1DayThrAlrtSEFSsThe number of Severely Errored Framing Seconds which must be received
prior to the generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.5 |
wfDs1E1DayThrAlrtUASsThe number of Unavailable Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.6 |
wfDs1E1DayThrAlrtCSSsThe number of Controlled Slip Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.7 |
wfDs1E1DayThrAlrtPCVsThe number of Path Coding Violations which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.8 |
wfDs1E1DayThrAlrtLESsThe number of Line Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.9 |
wfDs1E1DayThrAlrtBESsThe number of Bursty Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.10 |
wfDs1E1DayThrAlrtDMsThe number of Degraded Minutes which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.11 |
wfDs1E1DayThrAlrtLCVsThe number of Line Code Violations which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.12 |
wfDs1E1DayThrAlrtSASsThe number of SEF/AIS Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.13 |
wfDs1E1DayThrAlrtAISSsThe number of AIS defect Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.14 |
wfDs1E1DayThrAlrtFCsThe number of Path Failure Counts which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.34.1.15 |
wfDs1E1FarEndThrAlrtTableCurrent Far End statistics Alarm Threshold Crossing table. SEQUENCE OF WfDs1E1FarEndThrAlrtEntry .1.3.6.1.4.1.18.3.4.9.35 |
wfDs1E1FarEndThrAlrtEntryAn entry in the DS1E1 ThrAlrt table WfDs1E1FarEndThrAlrtEntry .1.3.6.1.4.1.18.3.4.9.35.1 |
wfDs1E1FarEndThrAlrtDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.35.1.1 |
wfDs1E1FarEndThrAlrtPortLineNumberThe instance ID that identifies the port.ro INTEGER .1.3.6.1.4.1.18.3.4.9.35.1.2 |
wfDs1E1FarEndThrAlrtESsThe number of Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.3 |
wfDs1E1FarEndThrAlrtSESsThe number of Severely Errored Seconds which must be received prior
to the generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.4 |
wfDs1E1FarEndThrAlrtSEFSsThe number of Severely Errored Framing Seconds which must be received
prior to the generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.5 |
wfDs1E1FarEndThrAlrtUASsThe number of Unavailable Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.6 |
wfDs1E1FarEndThrAlrtCSSsThe number of Controlled Slip Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.7 |
wfDs1E1FarEndThrAlrtPCVsThe number of Path Coding Violations which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.8 |
wfDs1E1FarEndThrAlrtLESsThe number of Line Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.9 |
wfDs1E1FarEndThrAlrtBESsThe number of Bursty Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.10 |
wfDs1E1FarEndThrAlrtDMsThe number of Degraded Minutes which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.11 |
wfDs1E1FarEndThrAlrtLCVsThe number of Line Code Violations which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.12 |
wfDs1E1FarEndThrAlrtSASsThe number of SEF/AIS Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.13 |
wfDs1E1FarEndThrAlrtAISSsThe number of AIS defect Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.14 |
wfDs1E1FarEndThrAlrtFCsThe number of Path Failure Counts which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.35.1.15 |
wfDs1E1FarEndDayThrAlrtTableCurrent Far End Day statistics Alarm Threshold Crossing table. SEQUENCE OF WfDs1E1FarEndDayThrAlrtEntry .1.3.6.1.4.1.18.3.4.9.36 |
wfDs1E1FarEndDayThrAlrtEntryAn entry in the DS1E1 ThrAlrt table WfDs1E1FarEndDayThrAlrtEntry .1.3.6.1.4.1.18.3.4.9.36.1 |
wfDs1E1FarEndDayThrAlrtDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.4.9.36.1.1 |
wfDs1E1FarEndDayThrAlrtPortLineNumberThe instance ID that identifies the port.ro INTEGER .1.3.6.1.4.1.18.3.4.9.36.1.2 |
wfDs1E1FarEndDayThrAlrtESsThe number of Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.3 |
wfDs1E1FarEndDayThrAlrtSESsThe number of Severely Errored Seconds which must be received prior
to the generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.4 |
wfDs1E1FarEndDayThrAlrtSEFSsThe number of Severely Errored Seconds which must be received
prior to the generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.5 |
wfDs1E1FarEndDayThrAlrtUASsThe number of Unavailable Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.6 |
wfDs1E1FarEndDayThrAlrtCSSsThe number of Controlled Slip Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.7 |
wfDs1E1FarEndDayThrAlrtPCVsThe number of Path Coding Violations which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.8 |
wfDs1E1FarEndDayThrAlrtLESsThe number of Line Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.9 |
wfDs1E1FarEndDayThrAlrtBESsThe number of Bursty Errored Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.10 |
wfDs1E1FarEndDayThrAlrtDMsThe number of Degraded Minutes which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.11 |
wfDs1E1FarEndDayThrAlrtLCVsThe number of Line Code Violations which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.12 |
wfDs1E1FarEndDayThrAlrtSASsThe number of SEF/AIS Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.13 |
wfDs1E1FarEndDayThrAlrtAISSsThe number of AIS defect Seconds which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.14 |
wfDs1E1FarEndDayThrAlrtFCsThe number of Path Failure Counts which must be received prior to the
generation of a Threshold Crossing Alert.rw Gauge .1.3.6.1.4.1.18.3.4.9.36.1.15 |
wfDs1E1ModuleEntryAn entry in the DS1E1 Base table WfDs1E1ModuleEntry .wfDs1E1ModuleTable.1 |
wfDs1E1ModuleDeleteCreate/Delete parameterrw Enumeration .wfDs1E1ModuleTable.1.1 |
wfDs1E1ModuleSlotInstance ID slot, filled in by driverro INTEGER .wfDs1E1ModuleTable.1.2 |
wfDs1E1ModuleModuleInstance ID slot, filled in by driverro INTEGER .wfDs1E1ModuleTable.1.3 |
wfDs1E1ModulePrimaryClockSpecifies the primary source for transmit timing. Both ports use the same
transmit timing source. The options for timing source are internal timing
source, loop timing from either port and an external timing source.rw Enumeration .wfDs1E1ModuleTable.1.4 |
wfDs1E1ModuleSecondaryClockSpecifies the secondary source for transmit timing. During normal operation
transmit timing is derived from the primary timing source. If the primary
timing source fails, the software switches to secondary timing source.rw Enumeration .wfDs1E1ModuleTable.1.5 |
wfDs1E1ModuleCurrentClockIndicates the clock source currently in usero Enumeration .wfDs1E1ModuleTable.1.6 |
wfDs1E1ModuleExtClockOperationalIndicates whether the External clock is operationalro Enumeration .wfDs1E1ModuleTable.1.7 |
wfDs1E1ModuleLoop1ClockOperationalIndicates whether the timing source from port 1 is operationalro Enumeration .wfDs1E1ModuleTable.1.8 |
wfDs1E1ModuleLoop2ClockOperationalIndicates whether the timing source from port 2 is operationalro Enumeration .wfDs1E1ModuleTable.1.9 |
wfDs1E1ModuleLoop3ClockOperationalIndicates whether the timing source from port 3 is operationalro Enumeration .wfDs1E1ModuleTable.1.10 |
wfDs1E1ModuleLoop4ClockOperationalIndicates whether the timing source from port 4 is operationalro Enumeration .wfDs1E1ModuleTable.1.11 |
wfDs1E1ModuleCfgTxBufferUseCreditsConfigured Transmit Buffer Credits. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero causes router based default values to be used. All values are
accepted. Care should be taken not to set this to a value which is
much greater than the default. The default can be read out of the
wfDs1E1ModuleTxBufferUseCredits attribute when the router is
running with this attribute set to zero. Sets to this attribute
may take up to one minute to take effect.rw INTEGER .wfDs1E1ModuleTable.1.12 |
wfDs1E1ModuleCfgRxBufferUseCreditsConfigured Receive Buffer Credits. Values other than zero over-ride
the router selected values. A value of zero has a special meaning.
Zero cuases router based default values to be used. Values larger
than the compiled ring size are truncated to the compiled ring
size. Sets to this attribute may take up to one minute to take
effect.rw INTEGER .wfDs1E1ModuleTable.1.13 |
wfDs1E1ModuleTxBufferUseCreditsCurrent Transmit Buffers available for use by modulero INTEGER .wfDs1E1ModuleTable.1.14 |
wfDs1E1ModuleRxBufferUseCreditsCurrent Receive Buffers available for use by modulero INTEGER .wfDs1E1ModuleTable.1.15 |