Wellfleet-FR2-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-FR2-MIB.
469
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
469 total| Object Name |
|---|
RFC1155-SMIThe Parameters for the Data Link Connection Management Interface SEQUENCE OF WfFrIfDlcmiEntry .1.3.6.1.4.1.18.3.5.9.9.1 |
wfFrVCircuitTableFrame Relay Circuit table gives information about a virtual circuits. SEQUENCE OF WfFrVCircuitEntry .1.3.6.1.4.1.18.3.5.9.9.2 |
wfFrVCircuitEntryAn entry in the Frame Relay Circuit table. WfFrVCircuitEntry .1.3.6.1.4.1.18.3.5.9.9.2.1 |
wfFrCircuitDeleteIndication to delete this frame relay interface.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.1 |
wfFrCircuitLineNumberInstance identifier. This is the line number on which the associated Frame
Relay interface resides.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.2 |
wfFrCircuitLLIndexThe Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.3 |
wfFrCircuitNumberThe circuit number of this interface.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.4 |
wfFrCircuitDlciOne of three instance identifier. This is the Frame Relay 'address'
of the virtual circuit.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.5 |
wfFrCircuitStateIndicates the state of the particular virtual circuit.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.6 |
wfFrCircuitStateSetUser access for setting the state of a virtual circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.7 |
wfFrCircuitReceivedFECNsNumber of frames received indicating forward congestion.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.8 |
wfFrCircuitReceivedBECNsNumber of frames received indicating backward congestion.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.9 |
wfFrCircuitSentFramesThe number of frames sent from this virtual circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.10 |
wfFrCircuitSentOctetsThe number of octets sent from this virtual circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.11 |
wfFrCircuitReceivedFramesThe number of frames received from this virtual circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.12 |
wfFrCircuitReceivedOctetsThe number of octets received from this virtual circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.13 |
wfFrCircuitCreationTimeThe value of sysUpTime when the vc was created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.9.2.1.14 |
wfFrCircuitLastTimeChangeThe value of sysUpTime when last there was a change in vc state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.9.2.1.15 |
wfFrCircuitCommittedBurstIndicates the maximum amount of data, in bits, that the network
agrees to transfer under normal conditions, during the measurement
interval.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.16 |
wfFrCircuitExcessBurstIndicates teh maximum amount of uncommitted data bits that the network
will attempt to deliver over the measurement interval.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.17 |
wfFrCircuitThroughputThis is the average number of 'Frame Relay Information Field'
bits transferred per second across a user network interface in one
direction, measured over the measurement interval.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.18 |
wfFrCircuitMulticastIndicates whether this DLCI is used for multicast or single destination.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.19 |
wfFrCircuitTypeIndication of whether the VC was manually created (static),
or dynamically created (dynamic) via the data link control
management interface.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.20 |
wfFrCircuitDiscardsThe number of inbound frames discarded because of format errors,
because the VC is inactive or because the protocol was not registered
for this circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.21 |
wfFrCircuitDropsIndicates how many outbound frames were dropped. Usually these are
dropped because the VC is not active.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.22 |
wfFrCircuitSubCctCircuit number to use for this VC when configured in hybrid
(for bridging) or direct access (VC as a circuit) mode.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.23 |
wfFrCircuitModeThe mode of the given VC.
GROUP - treats the VC as one of many vc's on a circuit.
HYBRID - treats the VC as one of many vc's on a circuit for
protocol traffic, but as a separate circuit for bridging.
DIRECT - treats the VC as a separate circuit for all applications.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.24 |
wfFrCircuitCongestionDisableThis indicates whether the congestion algorithm should be used
for this VC. If this is not set, the value is inherited from the
DLCMI record.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.25 |
wfFrCircuitCongestionStateThis is used to indicate whether or not the VC is in a congested
state. If it is, no traffic will be sent on this VC.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.26 |
wfFrCircuitCongestionTmrThis is the time period over which congestion notifications are
counted. It is also the period during which the VC will cease
sending information before resuming transmission if no
congestion notifications are received.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.27 |
wfFrCircuitCongestionCtrThis represents the number of congestion notifications, when
received within wfFrCircuitCongestionTmr time, that will result
in the VC ceasing transmissions.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.28 |
wfFrCircuitWcpEnableEnable Compressionrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.29 |
wfFrCircuitPrimaryHoldTmrThe maximum number of seconds that a Frame Relay PVC
Primary will be kept inactive, ignoring status
messages, when it is terminated because the backup has
started.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.30 |
wfFrCircuitInactivityTimerInactivity Timer for SVCs. Zero disables timer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.31 |
wfFrCircuitInactivityModeSpecifies which packets will reset the SVC inactivity timer.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.32 |
wfFrCircuitCongestionMethodThe congestion method to use on this VC.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.33 |
wfFrCircuitShapedHiXmitsSame as wfCctOptsEntry.wfCctOptsHiXmits for this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.34 |
wfFrCircuitShapedNormalXmitsSame as wfCctOptsEntry.wfCctOptsNormalXmits for this
VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.35 |
wfFrCircuitShapedLoXmitsSame as wfCctOptsEntry.wfCctOptsLoXmits for this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.36 |
wfFrCircuitShapedHiClippedPktsSame as wfCctOptsEntry.wfCctOptsHiClippedPkts for
this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.37 |
wfFrCircuitShapedNormalClippedPktsSame as wfCctOptsEntry.wfCctOptsNormalClippedPkts for
this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.38 |
wfFrCircuitShapedLoClippedPktsSame as wfCctOptsEntry.wfCctOptsLoClippedPkts for
this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.39 |
wfFrCircuitShapedHiQHighWaterPktsSame as wfCctOptsEntry.wfCctOptsHiQHighWaterPkts for
this VCro Gauge .1.3.6.1.4.1.18.3.5.9.9.2.1.40 |
wfFrCircuitShapedNormalQHighWaterPktsSame as wfCctOptsEntry.wfCctOptsNormalQHighWaterPkts
for this VCro Gauge .1.3.6.1.4.1.18.3.5.9.9.2.1.41 |
wfFrCircuitShapedLoQHighWaterPktsSame as wfCctOptsEntry.wfCctOptsLoQHighWaterPkts for
this VCro Gauge .1.3.6.1.4.1.18.3.5.9.9.2.1.42 |
wfFrCircuitShapedDroppedPktsSame as wfCctOptsEntry.wfCctOptsDroppedPkts for this
VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.43 |
wfFrCircuitShapedLargePktsSame as wfCctOptsEntry.wfCctOptsLargePkts for this
VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.44 |
wfFrCircuitShapedHiTotalOctetsSame as wfCctOptsEntry.wfCctOptsHiTotalOctets for
this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.45 |
wfFrCircuitShapedNormalTotalOctetsSame as wfCctOptsEntry.wfCctOptsNormalTotalOctets for
this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.46 |
wfFrCircuitShapedLoTotalOctetsSame as wfCctOptsEntry.wfCctOptsLoTotalOctets for
this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.47 |
wfFrCircuitShapedPktsNotQueuedSame as wfCctOptsEntry.wfCctOptsPktsNotQueued for
this VCro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.48 |
wfFrCircuitShapedHighWaterPktsClearSame as wfCctOptsEntry.wfCctOptsHighWaterPktsClear
for this VCrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.49 |
wfFrCircuitShapedHiQueueLimitSame as wfCctOptsEntry.wfCctOptsHighPriorityQueueLimit
for this VC. If set to inherit (0), then the VC uses
part of the global allocation of buffers in the DLCMI
entry.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.50 |
wfFrCircuitShapedNormalQueueLimitSame as wfCctOptsEntry.wfCctOptsNormalPriorityQueueLimit
for this VC. If set to inherit (0), then the VC uses
part of the global allocation of buffers in the DLCMI
entry.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.51 |
wfFrCircuitShapedLoQueueLimitSame as wfCctOptsEntry.wfCctOptsLowPriorityQueueLimit
for this VC. If set to inherit (0), then the VC uses
part of the global allocation of buffers in the DLCMI
entry.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.52 |
wfFrCircuitStartupDelayNumber of seconds the VC should wait before creating
the circuit or doing a dp_vc_line.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.53 |
wfFrCircuitCurHiQueueLimitThis is the current high queue limit, based on the
VC and DLCMI configuration.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.2.1.54 |
wfFrCircuitCurNormalQueueLimitThis is the current normal queue limit, based on the
VC and DLCMI configuration.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.2.1.55 |
wfFrCircuitCurLoQueueLimitThis is the current low queue limit, based on the
VC and DLCMI configuration.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.2.1.56 |
wfFrCircuitShapingStateIndicates current state of a VCs traffic shaping
configurationro Enumeration .1.3.6.1.4.1.18.3.5.9.9.2.1.57 |
wfFrCircuitBwThresholdSet 3 to 10 times of the CIR configured with this PVC.
The threshold value for starting to send Normal and
Low Priority traffic is calculated based on physical
line speed. Setting this object to 3 to 10 times of CIR
value will provide more chance to the Normal and Low
Priority traffic so that it will help the Normal and Low
Priority traffic of low speed links over high speed
physical line from starvation such as 56Kbps and 65Kbps
lines over HSSI.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.2.1.58 |
wfFrCircuitReceivedDEsNumber of frames received from the network indicating
that they were eligible for discard since the virtual
circuit was created. This occurs when the remote DTE
sets the DE flag, or when in remote DTE's switch detects
that the frame was received as Excess Burst data.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.59 |
wfFrCircuitSentDEsNumber of frames sent from the network indicating
that they were eligible for discard since the virtual
circuit was created. This occurs when the local DTE
sets the DE flag, indicating that during Network congestion
situations those frames should be discarded in preference
of ther frames sent without the DE bit set.ro Counter .1.3.6.1.4.1.18.3.5.9.9.2.1.60 |
wfFrCctErrorTableThe Frame Relay Circuit Error Table. SEQUENCE OF WfFrCctErrorEntry .1.3.6.1.4.1.18.3.5.9.9.4 |
wfFrCctErrorEntryAn entry in the Frame Relay Circuit Error table. WfFrCctErrorEntry .1.3.6.1.4.1.18.3.5.9.9.4.1 |
wfFrCctErrorCctInstance Identifier - indicates the frame relay circuit numberro INTEGER .1.3.6.1.4.1.18.3.5.9.9.4.1.1 |
wfFrCctErrorDropsIndicates the number of frames that were dropped at the
circuit level. Generally this is because the particular
protocol (within the inbound frame) was not registered
for this circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.9.4.1.2 |
wfFrCctErrorDiscardsIndicates the number of frames that were discarded at the
circuit level. Generally this is because the outbound
frame was too long, or too short.ro Counter .1.3.6.1.4.1.18.3.5.9.9.4.1.3 |
wfFrServiceRecordTableFrame Relay service records group virtual circuits together. SEQUENCE OF WfFrServiceRecordEntry .1.3.6.1.4.1.18.3.5.9.9.5 |
wfFrServiceRecordEntryAn entry in the Frame Relay Service Record table. WfFrServiceRecordEntry .1.3.6.1.4.1.18.3.5.9.9.5.1 |
wfFrServiceRecordDeleteIndication to delete this frame relay service record.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.1 |
wfFrServiceRecordLineNumberInstance identifier. This is the line number on which the associated Frame
Relay interface resides.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.2 |
wfFrServiceRecordLLIndexThe Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.3 |
wfFrServiceRecordCircuitNumberThe circuit number of this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.4 |
wfFrServiceRecordDefaultFlagIdentifies default service record for VCs added via the
frame relay switch.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.5 |
wfFrServiceRecordNumberVCsNumber of virtual circuit associated with a service record.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.6 |
wfFrServiceRecordNameUser name for circuitrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.5.1.7 |
wfFrServiceRecordStateUsed to identify new service record instancesro Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.8 |
wfFrServiceRecordPreMultiCircuitcircuit number prior to enabling multiline, allows
restoration of pre-multiline circuitrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.9 |
wfFrServiceRecordBackupFilterCctThe circuit number used by the backup interface
to store/define the ppq filter configuration.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.10 |
wfFrServiceRecordBackupLineNumberIndicates one of the backup interfaces for this primary
interface. The circuit on this service record should be
shared onto that backup interface.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.11 |
wfFrServiceRecordBackupLLIndexIndicates one of the backup interfaces for this primary
interface. The circuit on this service record should be
shared onto that backup interface.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.12 |
wfFrServiceRecordBackupMainCctIndicates the main circuit of one of the backup interfaces
for this primary interface. The circuit on this service
record should be shared onto that backup interface.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.13 |
wfFrServiceRecordPrimaryLineNumberIndicates the primary interface for this backup interface
This should be set only in the Default Service Record.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.14 |
wfFrServiceRecordPrimaryLLIndexIndicates the primary interface for this backup interface.
This should be set only in the Default Service Record.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.15 |
wfFrServiceRecordPrimaryMainCctIndicates the main circuit on the primary interface for this
backup interface. This should be set only in the Default
Service Record.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.16 |
wfFrServiceRecordSVCDisableAllow SVCs on this service record.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.17 |
wfFrServiceRecordSVCLocNumNumber associated with this service record.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.5.1.18 |
wfFrServiceRecordSVCLocSubAdrSubaddress of type NSAP (Q.931) further qualifies numberrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.5.1.19 |
wfFrServiceRecordSVCLocPlanSupported Q.931 4.3.8/4.3.10 numbering plans. Each
plan is represented by the 4 least significant bits
to align with the values stated in Q.931.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.20 |
wfFrServiceRecordSVCLocTypeNumSupported Q.931 4.3.8/4.3.10 types of number. Each
type is represented by a value one greater than
the values stated in Q.931.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.21 |
wfFrServiceRecordSVCCallBlockAllow all calls, block inbound, block outbound, block
all calls.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.22 |
wfFrServiceRecordSVCInScrnDisableEnable SVC call screening.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.23 |
wfFrServiceRecordSVCInScrnUsageType of SVC call screening.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.24 |
wfFrServiceRecordSVCInactTimerInactivity Timer for SVCs. Zero disables timer.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.25 |
wfFrServiceRecordSVCInactModeInactivity check moderw Enumeration .1.3.6.1.4.1.18.3.5.9.9.5.1.26 |
wfFrServiceRecordNumberStaticVCsNumber of static vcs associated with a service record.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.27 |
wfFrServiceRecordNumberDynamicVCsNumber of dynamic vcs associated with a service record.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.28 |
wfFrServiceRecordNumberSVCsNumber of svcs associated with a service record.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.29 |
wfFrServiceRecordNumberActiveVCsNumber of active vcs associated with a service record.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.5.1.30 |
wfFrServiceRecordifLastChangeThe value of sysUpTime when last there was a
change in a vc state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.9.5.1.31 |
wfFrServiceRecordifInOctetsThe number of octets received from virtual circuits.ro Counter .1.3.6.1.4.1.18.3.5.9.9.5.1.32 |
wfFrServiceRecordifInDiscardsThe number of inbound frames discarded because of
format errors, because a VC is inactive or because
the protocol was not registered for this circuit.ro Counter .1.3.6.1.4.1.18.3.5.9.9.5.1.33 |
wfFrServiceRecordifOutOctetsThe number of octets sent from virtual circuits.ro Counter .1.3.6.1.4.1.18.3.5.9.9.5.1.34 |
wfFrServiceRecordifOutDiscardsIndicates how many outbound frames were dropped.
Usually these are dropped because a VC is not active.ro Counter .1.3.6.1.4.1.18.3.5.9.9.5.1.35 |
wfFrServiceRecordifOutCtrlPktsThe number of dlcmi frames sent.ro Counter .1.3.6.1.4.1.18.3.5.9.9.5.1.36 |
wfFrServiceRecordifInCtrlPktsThe number of dlcmi frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.5.1.37 |
wfFrSigTableThe MIB Table for Frame Relay Signalling SEQUENCE OF WfFrSigEntry .1.3.6.1.4.1.18.3.5.9.9.6 |
wfFrSigEntryThe entry of FR Signalling MIB table WfFrSigEntry .1.3.6.1.4.1.18.3.5.9.9.6.1 |
wfFrSigDeleteDelete FR Signalling on this interfacerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.1 |
wfFrSigDisableDisable FR Sig on this interfacerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.2 |
wfFrSigLineNumberLogical Line number. This attribute is Instance Id 1ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.6.1.3 |
wfFrSigLLIndexLower Layer Index. This attribute is Instance Id 2ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.6.1.4 |
wfFrSigStatusFrame Relay Signalling Status
This is also Q.933 Layer Status.
STATUS_RUNNING FR Signalling state machine is ready.
STATUS_FAULT FR Signalling is in a non-operative state.
STATUS_INIT FR Signalling is initializing.
STATUS_NOTPRESENT FR Signalling is not started yet. This value
is not likely except upon initial configuration.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.5 |
wfFrSigCircuitCircuit number of the FR Signaling Stack (needed?)rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.6.1.6 |
wfFrSigConformanceQ.933 Standard Conformance Selection
FRF4 Frame Relay Forum Implementation Agreement FRF.4
FRF4_PRIORITY FRF.4 plus support of X.213 Priority
Q933 ITU Q.933, 03/1993 - currently not implemented
ANSI_T1617 ANSI T1.617 - currently not implementedrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.7 |
wfFrSigSvcIdleTimerSVC Idle timeout value
Number of seconds in which SVCs are not passing data
before considered 'idle'.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.8 |
wfFrSigMaxSvcsMax number of SVC allowed on this interfacerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.9 |
wfFrSigSvcDeletePolicySVC Deletion Policy
ALWAYS always delete idle SVCs
HEAVY_USE delete idle SVCs when 85% of Max SVCs are open
NEVER never delete idle SVCsrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.10 |
wfFrSigSvcReplacePolicySVC Replacement Policy
ALWAYS replace an SVC of an equal or lower priority
IDLE replace an SVC of an equal or lower priority only if it
is idle
NEVER never replace an SVCrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.11 |
wfFrSigT303T303 - SETUP msg timer value in secondsrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.12 |
wfFrSigT305T305 - DISCONNECT timer valuerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.13 |
wfFrSigT308T308 - RELEASE timer valuerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.14 |
wfFrSigT310T310 - CALL PROCEEDING timer value
Q.931 specifies a default of 30-120 seconds for this timer.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.15 |
wfFrSigT322T322 - STATUS ENQUIRY timer valuerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.16 |
wfFrSigN322Number of times STATUS ENQUIRY is retransmittedrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.6.1.17 |
wfFrSigNumMaxSVCsMaximum number of SVCs currently in active statero INTEGER .1.3.6.1.4.1.18.3.5.9.9.6.1.18 |
wfFrSigNumConnRejNumber of SVC creation attempts which were rejected by Switchro Counter .1.3.6.1.4.1.18.3.5.9.9.6.1.19 |
wfFrSigNumSvcRejNumber of SVC setup attempts which were rejected by this routerro Counter .1.3.6.1.4.1.18.3.5.9.9.6.1.20 |
wfFrSigNumSvcFailedNumber of SVC setup attempts which failed due to errorsro Counter .1.3.6.1.4.1.18.3.5.9.9.6.1.21 |
wfFrLapfTableThe MIB Table for Frame Relay LAPF SEQUENCE OF WfFrLapfEntry .1.3.6.1.4.1.18.3.5.9.9.7 |
wfFrLapfEntryThe entry of FR LAPF MIB table WfFrLapfEntry .1.3.6.1.4.1.18.3.5.9.9.7.1 |
wfLapfDeleteDelete LAPF on this interfacerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.7.1.1 |
wfLapfDisableDisable Lapf on this interfacerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.7.1.2 |
wfLapfLineNumberLogical Line number. This attribute is Instance Id 1ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.3 |
wfLapfLLIndexLower Layer Index. This attribute is Instance Id 2ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.4 |
wfLapfStatusStatus of LAPF Data Link Control
STATUS_RUNNING LAPF layer is ready and responsive.
STATUS_FAULT LAPF layer is in a non-operative state.
STATUS_INIT LAPF layer is initializing.
STATUS_NOTPRESENT LAPF layer is not started yet. This value
is not likely except upon initial configuration.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.7.1.5 |
wfLapfStationTypeIdentifies the desired station type of this interface.
LAPF_USERSIDE LAPF acts as the User-side (DTE)
LAPF_NETWORKSIDE LAPF acts as the Network-side (DCE)rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.7.1.6 |
wfLapfActionInitiateThis identifies the action LAPF will take to initiate link set-up.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.7.1.7 |
wfLapfT200T200 - LAPF Base timer value, in tenths of a secondrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.8 |
wfLapfT203T203 - LAPF idle timer value, in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.9 |
wfLapfN200N200 - Max number of LAPF retransmissionsrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.10 |
wfLapfN201N201 - Max number of octets in LAPF Information fieldrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.11 |
wfLapfKk - Max number of outstanding I-framesrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.12 |
wfLapfRxWinCurrent receive window sizero INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.13 |
wfLapfTxWinCurrent transmit window sizero INTEGER .1.3.6.1.4.1.18.3.5.9.9.7.1.14 |
wfLapfSABMESentnumber of SABME sentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.15 |
wfLapfSABMERcvdnumber of SABME receivedro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.16 |
wfLapfUASentnumber of UA sentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.17 |
wfLapfUARcvdnumber of UA receivedro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.18 |
wfLapfDISCSentnumber of DISC sentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.19 |
wfLapfDISCRcvdnumber of DISC receivedro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.20 |
wfLapfDMSentnumber of DM sentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.21 |
wfLapfDMRcvdnumber of DM receivedro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.22 |
wfLapfFRMRSentnumber of FRMR sentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.23 |
wfLapfFRMRRcvdnumber of FRMR receivedro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.24 |
wfLapfRNRsSentnumber of RNR frames received since link is upro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.25 |
wfLapfRNRsRcvdnumber of RNR frames sent since link is upro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.26 |
wfLapfREJsSentnumber of REJ frames received since link is upro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.27 |
wfLapfREJsRcvdnumber of REJ frames sent since link is upro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.28 |
wfLapfIFramesSentnumber of I-frames received since last link establishmentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.29 |
wfLapfIFramesRcvdnumber of I-frames sent since last link establishmentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.30 |
wfLapfUISentnumber of un-numbered I-frames received since last link establishmentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.31 |
wfLapfUIRcvdnumber of un-numbered I-frames sent since last link establishmentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.32 |
wfLapfRRsSentnumber of RR frames sent since link is upro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.33 |
wfLapfRRsRcvdnumber of RR frames received since link is upro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.34 |
wfLapfXIDSentnumber of XID sentro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.35 |
wfLapfXIDRcvdnumber of XID receivedro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.36 |
wfLapfT200Timeoutsnumber of T200 Time-out that occured.ro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.37 |
wfLapfT203Timeoutsnumber of T203 time-out that occured.ro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.38 |
wfLapfN200Exceedednumber of N200 being exceeded.ro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.39 |
wfLapfN201Errornumber of N201 error occured.ro Counter .1.3.6.1.4.1.18.3.5.9.9.7.1.40 |
wfFrFRF4SigTableThe MIB Table for FRF4 SVC Signalling SEQUENCE OF WfFrFRF4SigEntry .1.3.6.1.4.1.18.3.5.9.9.9 |
wfFrFRF4SigEntryThe entry of FRF4 SVC Signalling MIB table WfFrFRF4SigEntry .1.3.6.1.4.1.18.3.5.9.9.9.1 |
wfFrFRF4SigDeleteDelete FRF4 SVC Signalling on this interfacerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.9.1.1 |
wfFrFRF4SigDisableDisable FRF4 SVC Signalling on this interfacerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.9.1.2 |
wfFrFRF4SigLineNumberLogical Line number. This attribute is Instance Id 1ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.3 |
wfFrFRF4SigLLIndexLower Layer Index. This attribute is Instance Id 2ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.4 |
wfFrFRF4SigMaxSvcsMaximum number of SVCs for this interfacerw INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.5 |
wfFrFRF4SigT303Timer number: T303
default time-out: 4 s
state of call: call present
cause for start: outgoing setup
normal stop: incoming connect/call-proceeding/
release-complete
at the first expiry: retransmit setup, restart T303
at the second expiry: clear callrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.6 |
wfFrFRF4SigT305Timer number: T305
default time-out: 30 s
state of call: disconnect ind
cause for start: outgoing disconnect
normal stop: incoming release/disconnect
at the first expiry: outgoing release
at the second expiry: timer not restartedrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.7 |
wfFrFRF4SigT308Timer number: T308
default time-out: 4 s
state of call: release req
cause for start: outgoing release
normal stop: incoming release/release-complete
at the first expiry: retransmit release, restart T308
at the second expiry: place access channel in maintenancerw INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.8 |
wfFrFRF4SigT310Timer number: T310
default time-out: 10 s
state of call: incoming call proceeding
cause for start: incoming call proceeding
normal stop: incoming connect/disconnect
at the first expiry: clear call
at the second expiry: timer not restartedrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.9 |
wfFrFRF4SigT322Timer number: T322
default time-out: 4 s
state of call: any call state
cause for start: outgoing status enquiry
normal stop: incoming status/disconnect/
release/release-complete
at the first expiry: resend status-enq, restart T322
at the next expiry: if (
and restart T322rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.10 |
wfFrFRF4SigN322Number of times STATUS ENQUIRY is retransmittedrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.9.1.11 |
wfFrFRF4SigFramesSentNumber of frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.12 |
wfFrFRF4SigOctetsSentNumber of octets transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.13 |
wfFrFRF4SigFramesReceivedNumber of frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.14 |
wfFrFRF4SigOctetsReceivedNumber of octets received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.15 |
wfFrFRF4SigFramesDroppedNumber of frames dropped.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.16 |
wfFrFRF4SigFramesDiscardedNumber of frames discarded.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.17 |
wfFrFRF4SigSetupRxNumber of SETUP frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.18 |
wfFrFRF4SigCallProcRxNumber of CALL PROCEEDING frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.19 |
wfFrFRF4SigConnectRxNumber of CONNECT frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.20 |
wfFrFRF4SigDisconnectRxNumber of DISCONNECT frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.21 |
wfFrFRF4SigReleaseRxNumber of RELEASE frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.22 |
wfFrFRF4SigReleaseCompleteRxNumber of RELEASE COMPLETE frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.23 |
wfFrFRF4SigStatusRxNumber of STATUS frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.24 |
wfFrFRF4SigStatusEnquiryRxNumber of STATUS ENQUIRY frames received.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.25 |
wfFrFRF4SigSetupTxNumber of SETUP frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.26 |
wfFrFRF4SigCallProcTxNumber of CALL PROCEEDING frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.27 |
wfFrFRF4SigConnectTxNumber of CONNECT frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.28 |
wfFrFRF4SigDisconnectTxNumber of DISCONNECT frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.29 |
wfFrFRF4SigReleaseTxNumber of RELEASE frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.30 |
wfFrFRF4SigReleaseCompleteTxNumber of RELEASE COMPLETE frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.31 |
wfFrFRF4SigStatusTxNumber of STATUS frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.32 |
wfFrFRF4SigStatusEnquiryTxNumber of STATUS ENQUIRY frames transmitted.ro Counter .1.3.6.1.4.1.18.3.5.9.9.9.1.33 |
wfFrSVCOptionsTableThe MIB Table for FRF4 SVC Signalling options SEQUENCE OF WfFrSVCOptionsEntry .1.3.6.1.4.1.18.3.5.9.9.10 |
wfFrSVCOptionsEntryThe entry of FRF4 SVC Signalling options MIB table WfFrSVCOptionsEntry .1.3.6.1.4.1.18.3.5.9.9.10.1 |
wfFrSVCOptionsDeleteDelete SVC options recordrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.1 |
wfFrSVCOptionsDisableDisable use of SVC options recordrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.2 |
wfFrSVCOptionsLineNumberLogical Line number. This attribute is Instance Id 1ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.3 |
wfFrSVCOptionsLLIndexLower Layer Index. This attribute is Instance Id 2ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.4 |
wfFrSVCOptionsCircuitNumberCircuit number. This attribute is Instance Id 3ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.5 |
wfFrSVCOptionsInstanceIndexInstance index assigned by Site Manager. This attribute
is Instance Id 4ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.6 |
wfFrSVCOptionsRemNumConfigured options apply to this numberrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.10.1.7 |
wfFrSVCOptionsRemSubAdrSubaddress of type NSAP (Q.931) further qualifies numberrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.10.1.8 |
wfFrSVCOptionsRemPlanSupported Q.931 4.3.8/4.3.10 numbering plans. Each
plan is represented by the 4 least significant bits
to align with the values stated in Q.931.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.9 |
wfFrSVCOptionsRemTypeNumSupported Q.931 4.3.8/4.3.10 types of number. Each
type is represented by a value one greater than
the values stated in Q.931.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.10 |
wfFrSVCOptionsBroadcastDisableAdd this number to the SVC broadcast domainrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.11 |
wfFrSVCOptionsInactTimerAmount of time (in seconds) to wait for packets before
disconnecting the SVCrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.12 |
wfFrSVCOptionsInactModeInactivity check moderw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.13 |
wfFrSVCOptionsX213DataPriorityThe priority of data on the network connection
as defined in Q.933 and X.213. Each priority is
the numerical value associated with said priority
in Q.933rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.14 |
wfFrSVCOptionsX213DataLQAPriorityThe lowest quality acceptable (LQA) priority of
data on the network connection as defined in Q.933
and X.213. Each priority is the numerical value associated
with said priority in Q.933rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.15 |
wfFrSVCOptionsX213GainPriorityThe priority to gain a network connection
as defined in Q.933 and X.213. Each priority is
the numerical value associated with said priority
in Q.933rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.16 |
wfFrSVCOptionsX213GainLQAPriorityThe lowest quality acceptable (LQA) priority to
gain a network connection as defined in Q.933
and X.213. Each priority is the numerical value associated
with said priority in Q.933rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.17 |
wfFrSVCOptionsX213KeepPriorityThe priority to keep a network connection
as defined in Q.933 and X.213. Each priority is
the numerical value associated with said priority
in Q.933rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.18 |
wfFrSVCOptionsX213KeepLQAPriorityThe lowest quality acceptable (LQA) priority to
keep a network connection as defined in Q.933
and X.213. Each priority is the numerical value associated
with said priority in Q.933rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.19 |
wfFrSVCOptionsLLCoreOutThroughputRequested outgoing throughput.
Q.933:Throughput is the average number of frame mode
information field bits transferred per second across a
user-network interface in one direction, measured over
an interval of duration T.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.20 |
wfFrSVCOptionsLLCoreInThroughputRequested incoming throughput.
Q.933:Throughput is the average number of frame mode
information field bits transferred per second across a
user-network interface in one direction, measured over
an interval of duration T.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.21 |
wfFrSVCOptionsLLCoreMinOutThroughputMinimum acceptable outgoing throughput.
Q.933:Throughput is the average number of frame mode
information field bits transferred per second across a
user-network interface in one direction, measured over
an interval of duration T.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.22 |
wfFrSVCOptionsLLCoreMinInThroughputMinimum acceptable incoming throughput.
Q.933:Throughput is the average number of frame mode
information field bits transferred per second across a
user-network interface in one direction, measured over
an interval of duration T.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.23 |
wfFrSVCOptionsLLCoreOutBcOutgoing committed burst size in bytes.
Q.933:Committed burst is the maximum amount of data
(in bits) that the network agrees to transfer, under
normal conditions, over a measurement interval T.
information field bits transferred per second across a
user-network interface in one direction, measured over
an interval of duration T.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.24 |
wfFrSVCOptionsLLCoreInBcIncoming committed burst size in bytes.
Q.933:Committed burst is the maximum amount of data
(in bits) that the network agrees to transfer, under
normal conditions, over a measurement interval T.
information field bits transferred per second across a
user-network interface in one direction, measured over
an interval of duration T.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.25 |
wfFrSVCOptionsLLCoreOutBeOutgoing excess burst size in bytes.
Q.933:Excess burst is the maximum amount of
uncommitted data (in bits) that the network
will attempt to deliver over a measurement
interval T.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.26 |
wfFrSVCOptionsLLCoreInBeIncoming excess burst size in bytes.
Q.933:Excess burst is the maximum amount of
uncommitted data (in bits) that the network
will attempt to deliver over a measurement
interval T.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.27 |
wfFrSVCOptionsCongestionDisableThis indicates whether the congestion algorithm
should be used for this VC. If this is not set,
the value is inherited from the DLCMI record.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.28 |
wfFrSVCOptionsCongestionTmrThis is the time period over which congestion
notifications are counted. It is also the
period during which the VC will cease sending
information before resuming transmission if no
congestion notifications are received.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.29 |
wfFrSVCOptionsCongestionCtrThis represents the number of congestion
notifications, when received within
wfFrSVCOptionsCongestionTmr time, that will result
in the VC ceasing transmissions.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.10.1.30 |
wfFrSVCOptionsCongestionMethodAction when VC congestion occursrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.31 |
wfFrSVCOptionsTrafficShapingDisableEnable VC traffic shapingrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.32 |
wfFrSVCOptionsWcpEnableEnable Compressionrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.10.1.33 |
wfFrSVCOptionsNameUser name for SVC optionsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.10.1.34 |
wfFrSVCActiveCallTableThe MIB Table for the FRF.4 signalling parameters
in use for a sucessfully signalled SVC SEQUENCE OF WfFrSVCActiveCallEntry .1.3.6.1.4.1.18.3.5.9.9.11 |
wfFrSVCActiveCallEntryThe entry of FRF4 SVC active call MIB table WfFrSVCActiveCallEntry .1.3.6.1.4.1.18.3.5.9.9.11.1 |
wfFrSVCActiveCallDeleteDelete SVC active call recordrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.11.1.1 |
wfFrSVCActiveCallLineNumberLogical Line number. This attribute is Instance Id 1ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.2 |
wfFrSVCActiveCallLLIndexLower Layer Index. This attribute is Instance Id 2ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.3 |
wfFrSVCActiveCallDLCIDCLI number. This attribute is Instance Id 3ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.4 |
wfFrSVCActiveCallDirectionDirection of call relative to routerro Enumeration .1.3.6.1.4.1.18.3.5.9.9.11.1.5 |
wfFrSVCActiveCallCircuitNumberCircuit number associated with this callro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.6 |
wfFrSVCActiveCallCalledNumNumber from called party number information elementro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.11.1.7 |
wfFrSVCActiveCallCalledSubAdrSubaddress from called party subaddress information
elementro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.11.1.8 |
wfFrSVCActiveCallCalledPlanNumbering plan from called party number
information elementro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.9 |
wfFrSVCActiveCallCalledTypeNumType of number from called party number
information elementro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.10 |
wfFrSVCActiveCallCallingNumNumber from calling party number information elementro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.11.1.11 |
wfFrSVCActiveCallCallingSubAdrSubaddress from calling party subaddress information
elementro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.9.11.1.12 |
wfFrSVCActiveCallCallingPlanNumbering plan from calling party number
information elementro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.13 |
wfFrSVCActiveCallCallingTypeNumType of number from calling party number
information elementro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.14 |
wfFrSVCActiveCallX213DataPriorityThe priority of data on the network connection,
from the X.213 information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.15 |
wfFrSVCActiveCallX213DataLQAPriorityThe lowest quality acceptable (LQA) priority of
data on the network connection, from the X.213
information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.16 |
wfFrSVCActiveCallX213GainPriorityThe priority to gain a network connection,
from the X.213 information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.17 |
wfFrSVCActiveCallX213GainLQAPriorityThe lowest quality acceptable (LQA) priority to
gain a network connection, from the X.213
information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.18 |
wfFrSVCActiveCallX213KeepPriorityThe priority to keep a network connection,
from the X.213 information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.19 |
wfFrSVCActiveCallX213KeepLQAPriorityThe lowest quality acceptable (LQA) priority to
keep a network connection, from the X.213
information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.20 |
wfFrSVCActiveCallLLCoreOutThroughputRequested outgoing throughput, from the link layer
core information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.21 |
wfFrSVCActiveCallLLCoreInThroughputRequested incoming throughput, from the link layer
core information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.22 |
wfFrSVCActiveCallLLCoreMinOutThroughputMinimum acceptable outgoing throughput, from the
link layer core information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.23 |
wfFrSVCActiveCallLLCoreMinInThroughputMinimum acceptable incoming throughput, from the
link layer core information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.24 |
wfFrSVCActiveCallLLCoreOutBcOutgoing committed burst size in bytes, from the
link layer core information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.25 |
wfFrSVCActiveCallLLCoreInBcIncoming committed burst size in bytes, from the
link layer core information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.26 |
wfFrSVCActiveCallLLCoreOutBeOutgoing excess burst size in bytes, from the
link layer core information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.27 |
wfFrSVCActiveCallLLCoreInBeIncoming excess burst size in bytes, from the
link layer core information element.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.28 |
wfFrSVCActiveCallConnectTimeTime connect message was sent or received.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.11.1.29 |
wfFrPtIntfTableThe PVC Passthru interface table contains the list of
interface circuits. There will be one entry for each
direct mode PVC configured for PVC Passthru. SEQUENCE OF WfFrPtIntfEntry .1.3.6.1.4.1.18.3.5.9.9.12 |
wfFrPtIntfEntryA PVC Passthru interface. WfFrPtIntfEntry .1.3.6.1.4.1.18.3.5.9.9.12.1 |
wfFrPtIntfDeleteCreate/delete indicator for the PVC Passthru Interface entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.12.1.1 |
wfFrPtIntfDisableEnable/disable indicator for the PVC Passthru Interface entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.12.1.2 |
wfFrPtIntfCctThe DP circuit on which this interface resides. This
attribute is the first component of the Instance ID
for this object.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.12.1.3 |
wfFrPtIntfDlciThe dlci associated with this circuit. This attribute
is the second component of the Instance ID for this object.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.12.1.4 |
wfFrPtIntfStateInterface state indicator. The state is active if the circuit
is up.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.12.1.5 |
wfFrPtIntfRxFramesThe number of frames received on this interface.ro Counter .1.3.6.1.4.1.18.3.5.9.9.12.1.6 |
wfFrPtIntfTxFramesThe number of frames transmitted on this interface.ro Counter .1.3.6.1.4.1.18.3.5.9.9.12.1.7 |
wfFrPtIntfDiscardsThe number of inbound frames discarded, either because
this passthru interface is disabled or it has no partner.ro Counter .1.3.6.1.4.1.18.3.5.9.9.12.1.8 |
wfFrPtIntfDropsThe number of outbound frames dropped, because this
passthru interface is disabled or inactive.ro Counter .1.3.6.1.4.1.18.3.5.9.9.12.1.9 |
wfFrPtMappingTableThe PVC Passthru mapping table contains the static routes
between PVCs. SEQUENCE OF WfFrPtMappingEntry .1.3.6.1.4.1.18.3.5.9.9.13 |
wfFrPtMappingEntryA PVC Passthru mapping. WfFrPtMappingEntry .1.3.6.1.4.1.18.3.5.9.9.13.1 |
wfFrPtMappingDeleteCreate/delete indicator for the PVC Passthru Mapping entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.13.1.1 |
wfFrPtMappingDisableEnable/disable indicator for the PVC Passthru Mapping entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.13.1.2 |
wfFrPtMappingCctAThe first circuit (i.e., hybrid mode PVC) for this mapping.
All data received on this circuit is delivered to circuit B.
This attribute is the 1st of 2 components of the Instance ID
for this object.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.13.1.3 |
wfFrPtMappingDlciAThe dlci associated with circuit A.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.13.1.4 |
wfFrPtMappingCctBThe second circuit (i.e., hybrid mode PVC) for this mapping.
All data received on this circuit is delivered to circuit A.
This attribute is the 2nd of 2 components of the Instance ID
for this object.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.13.1.5 |
wfFrPtMappingDlciBThe dlci associated with circuit B.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.13.1.6 |
wfFrPtMappingStateMapping state indicator. The state is active if both circuits
are up, inactive if one or both are down. The state is invalid
if this mapping conflicts with another, or is misconfigured.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.13.1.7 |
wfFrMlTableThe Multilink Frame Relay Table, containing information
and statistics for each Multilink Circuit SEQUENCE OF WfFrMlEntry .1.3.6.1.4.1.18.3.5.9.9.14 |
wfFrMlEntryper bundle Multilink Frame Relay information and counters WfFrMlEntry .1.3.6.1.4.1.18.3.5.9.9.14.1 |
wfFrMlDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.14.1.1 |
wfFrMlCircuitNumbercct number for this instancero INTEGER .1.3.6.1.4.1.18.3.5.9.9.14.1.2 |
wfFrMlModeMultilink frame relay moderw Enumeration .1.3.6.1.4.1.18.3.5.9.9.14.1.3 |
wfFrMlFragPermEnableBundle level enable/disable for fragmenting packets
regardless of trigger size.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.14.1.4 |
wfFrMlCircuitMaxBuffersThis is the maximum number of stored buffers allowed in the
Multilink Receive logic for this circuit at any one time.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.14.1.5 |
wfFrMlFragTriggerSizeThis is the minimum size of a packet of which Multilink
will fragment.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.14.1.6 |
wfFrMlFragStrictenable/disable strict fragmentation algorithm i.e. fragmenting
a packet when its size exceeds the threshold regardless of what
the average packet size isrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.14.1.7 |
wfFrMlAggVCStatusModeFRF.13 defined mode of status aggregation.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.14.1.8 |
wfFrMlCompressionEnableEnable compression for all PVCs in the bundle.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.14.1.9 |
wfFrMlHomeSlotSlot on which this Multilink Control Subsystem existsro INTEGER .1.3.6.1.4.1.18.3.5.9.9.14.1.10 |
wfFrMlStatsLineCntCurrent count of lines in Multilink bundlero Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.11 |
wfFrMlStatsBundleSpdCurrent total bandwidth of Multilink bundlero Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.12 |
wfFrMlStatsTxOctetsNumber of octets transmitted by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.13 |
wfFrMlStatsTxPktsNumber of packets transmitted by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.14 |
wfFrMlStatsAvgTxListLenAverage number of packets received in the transient
list by the Multilink Transmit gate.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.15 |
wfFrMlStatsRxOctetsNumber of octets received without errorro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.16 |
wfFrMlStatsRxPktsNumber of packets received by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.17 |
wfFrMlStatsReasmFailsNumber of packet reassembly failuresro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.18 |
wfFrMlStatsSeqNumberLostNumber of Multilink packets considered to be lost on
the wirero Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.19 |
wfFrMlStatsSeqNumberArrivedLateNumber of Multilink packets which arrive
containing an old Sequence Number. IE: packets
with a more current Sequence Number have already
been sent up to NCPro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.20 |
wfFrMlStatsReSeqBufferCntNumber of Multilink packets currently stored
in the ReSequencing buffer pool.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.21 |
wfFrMlStatsReSeqBufferMaxThe Maximum Number of Multilink packets stored
in the ReSequencing buffer pool.ro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.22 |
wfFrMlStatsExceededBufferMaxThe number of times a buffer needed to be stored by the
Multilink Receive logic when the count of buffers stored,
wfFrMlStatsReSeqBufferMax,was equal to the maximum allowable
for this circuit, wfFrMlCircuitMaxBuffers.ro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.23 |
wfFrMlStatsLinkIdleEventsThe number of times the Multilink Receive logic detected a
stored buffer received on a line which has been declared idle.ro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.24 |
wfFrMlStatsCalcPercentenable/disable collection of Rx percentage line usagerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.14.1.25 |
wfFrMlStatsDebugDEBUG parameter - this is used to control debug code
for the Multilink subsystemrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.14.1.26 |
wfFrMlStatsReassmBufferCntNumber of Multilink packets currently stored
in the Reassembling buffer pools.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.27 |
wfFrMlStatsReassmBufferMaxThe Maximum Number of Multilink packets stored
in the Reassembling buffer pools.ro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.28 |
wfFrMlStatsNumPktsFragmentedThe Number of Multilink packets that were
fragmented.ro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.29 |
wfFrMlStatsPQHiXmitsHigh priority transmit count.ro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.30 |
wfFrMlStatsPQNormalXmitsNormal priority transmit count.ro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.31 |
wfFrMlStatsPQLoXmitsLow priority transmit countro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.32 |
wfFrMlStatsPQHiClippedPktsHigh priority transmit clip Countro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.33 |
wfFrMlStatsPQNormalClippedPktsNormal priority transmit clip Countro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.34 |
wfFrMlStatsPQLoClippedPktsLow priority transmit clip Countro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.35 |
wfFrMlStatsPQIntrQHighWaterPktsInterrupt-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.36 |
wfFrMlStatsPQHiQHighWaterPktsHigh-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.37 |
wfFrMlStatsPQNormalQHighWaterPktsNormal-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.38 |
wfFrMlStatsPQLoQHighWaterPktsLow-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.9.9.14.1.39 |
wfFrMlStatsPQHighWaterPktsClearAttribute to clear the high-water marks. When the MIB
changes, Priority Queueing (if ENABLED) checks to see
if HighWaterPktsClear is different than the last time the MIB
was modified in any way. If it is different,
all the high water marks (see above) are set to zero.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.14.1.40 |
wfFrMlStatsPQDroppedPktsPackets which were filtered in Priority Queueingro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.41 |
wfFrMlStatsPQLargePktsLarge Packets which became an exception to latency rulesro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.42 |
wfFrMlStatsPQHiTotalOctetsRunning total of High Octets transmitted when
using Bandwidth Allocation dequeueing algorithmro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.43 |
wfFrMlStatsPQNormalTotalOctetsRunning total of Normal Octets transmitted when
using Bandwidth Allocation dequeueing algorithmro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.44 |
wfFrMlStatsPQLoTotalOctetsRunning total of Low Octets transmitted when
using Bandwidth Allocation dequeueing algorithmro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.45 |
wfFrMlStatsPQPktsNotQueuedPackets that were not Queued or Dropped by
Priority Queuingro Counter .1.3.6.1.4.1.18.3.5.9.9.14.1.46 |
wfFrMlVCTableThe Multilink Frame Relay VC Table, containing information
and statistics for each multilink aggregated VC SEQUENCE OF WfFrMlVCEntry .1.3.6.1.4.1.18.3.5.9.9.15 |
wfFrMlVCEntryMultilink Frame Relay VC information and counters WfFrMlVCEntry .1.3.6.1.4.1.18.3.5.9.9.15.1 |
wfFrMlVCDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.9.15.1.1 |
wfFrMlVCCircuitNumbercct number for this instancero INTEGER .1.3.6.1.4.1.18.3.5.9.9.15.1.2 |
wfFrMlVCDlciDCLI number.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.15.1.3 |
wfFrMlVCAggStateVc is active or inactive according to rules of
wfFrMlAggVCStatusMode.rw Enumeration .1.3.6.1.4.1.18.3.5.9.9.15.1.4 |
wfFrMlVCAggNumberVCsNumber of VCs comprising this aggregated VC.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.15.1.5 |
wfFrMlVCAggNumberVCsActiveNumber of VCs comprising this aggregated VC that are active.rw INTEGER .1.3.6.1.4.1.18.3.5.9.9.15.1.6 |
wfFrMlVCStatsLineCntCurrent count of lines in this aggregated VC that are activero Gauge .1.3.6.1.4.1.18.3.5.9.9.15.1.7 |
wfFrMlVCStatsBundleSpdCurrent total bandwidth of lines used by this vcro Gauge .1.3.6.1.4.1.18.3.5.9.9.15.1.8 |
wfFrMlVCStatsTxOctetsNumber of octets transmitted by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.9 |
wfFrMlVCStatsTxPktsNumber of packets transmitted by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.10 |
wfFrMlVCStatsAvgTxListLenAverage number of packets received in the transient
list by the Multilink Transmit gate.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.15.1.11 |
wfFrMlVCStatsRxOctetsNumber of octets received without errorro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.12 |
wfFrMlVCStatsRxPktsNumber of packets received by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.13 |
wfFrMlVCStatsReasmFailsNumber of packet reassembly failuresro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.14 |
wfFrMlVCStatsSeqNumberLostNumber of Multilink packets considered to be lost on
the wirero Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.15 |
wfFrMlVCStatsSeqNumberArrivedLateNumber of Multilink packets which arrive
containing an old Sequence Number. IE: packets
with a more current Sequence Number have already
been sent up to NCPro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.16 |
wfFrMlVCStatsReSeqBufferCntNumber of Multilink packets currently stored
in the ReSequencing buffer pool.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.15.1.17 |
wfFrMlVCStatsReSeqBufferMaxThe Maximum Number of Multilink packets stored
in the ReSequencing buffer pool.ro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.18 |
wfFrMlVCStatsExceededBufferMaxThe number of times a buffer needed to be stored by the
Multilink Receive logic when the count of buffers stored,
wfFrMlVCStatsReSeqBufferMax,was equal to the maximum allowable
for this circuit, wfFrMlVCCircuitMaxBuffers.ro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.19 |
wfFrMlVCStatsLinkIdleEventsThe number of times the Multilink Receive logic detected a
stored buffer received on a line which has been declared idle.ro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.20 |
wfFrMlVCStatsCalcPercentenable/disable collection of Rx percentage line usagerw Enumeration .1.3.6.1.4.1.18.3.5.9.9.15.1.21 |
wfFrMlVCStatsDebugDEBUG parameter - this is used to control debug code
for the Multilink subsystemrw INTEGER .1.3.6.1.4.1.18.3.5.9.9.15.1.22 |
wfFrMlVCStatsReassmBufferCntNumber of Multilink packets currently stored
in the Reassembling buffer pools.ro Gauge .1.3.6.1.4.1.18.3.5.9.9.15.1.23 |
wfFrMlVCStatsReassmBufferMaxThe Maximum Number of Multilink packets stored
in the Reassembling buffer pools.ro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.24 |
wfFrMlVCStatsNumPktsFragmentedThe Number of Multilink packets that were
fragmented.ro Counter .1.3.6.1.4.1.18.3.5.9.9.15.1.25 |
wfFrMapDlcmiTableThe Parameters for the Data Link Connection Management
Interface for the frame relay service on this
interface. SEQUENCE OF WfFrMapDlcmiEntry .1.3.6.1.4.1.18.3.5.9.9.16 |
wfFrMapDlcmiEntryThe Parameters for a particular Data Link Connection
Management Interface. WfFrMapDlcmiEntry .1.3.6.1.4.1.18.3.5.9.9.16.1 |
wfFrMapDlcmiIfIndexThe ifIndex value of the corresponding ifEntry.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.1 |
wfFrMapDlcmiStateThis variable states which Data Link Connection
Management scheme is active (and by implication, what
DLCI it uses) on the Frame Relay interface.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.16.1.2 |
wfFrMapDlcmiAddressThis variable states which address format is in use on
the Frame Relay interface.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.16.1.3 |
wfFrMapDlcmiAddressLenThis variable states the address length in octets. In
the case of Q922 format, the length indicates the
entire length of the address including the control
portion.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.16.1.4 |
wfFrMapDlcmiPollingIntervalThis is the number of seconds between successive
status enquiry messages.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.5 |
wfFrMapDlcmiFullEnquiryIntervalNumber of status enquiry intervals that pass before
issuance of a full status enquiry message.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.6 |
wfFrMapDlcmiErrorThresholdThis is the maximum number of unanswered Status
Enquiries the equipment shall accept before declaring
the interface down.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.7 |
wfFrMapDlcmiMonitoredEventsThis is the number of status polling intervals over
which the error threshold is counted. For example, if
within 'MonitoredEvents' number of events the station
receives 'ErrorThreshold' number of errors, the
interface is marked as down.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.8 |
wfFrMapDlcmiMaxSupportedVCsThe maximum number of Virtual Circuits allowed for
this interface. Usually dictated by the Frame Relay
network.
In response to a SET, if a value less than zero or
higher than the agent's maximal capability is
configured, the agent should respond badValuero INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.9 |
wfFrMapDlcmiMulticastThis indicates whether the Frame Relay interface is
using a multicast service.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.16.1.10 |
wfFrMapDlcmiStatusThis indicates the status of the Frame Relay interface
as determined by the performance of the dlcmi. If no
dlcmi is running, the Frame Relay interface will stay
in the running state indefinitely.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.16.1.11 |
wfFrMapDlcmiRowStatusSNMP Version 2 Row Status Variable. Writable objects
in the table may be written in any RowStatus state.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.12 |
wfFrMapDlcmiLineNumberInstance identifier. This is the line number on which the
associated Frame Relay interface resides.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.13 |
wfFrMapDlcmiLLIndexThe Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.16.1.14 |
wfFrMapCircuitTableThe Frame Relay VC Table to support RFC2115 , containing
information and statistics for frCircuitEntry SEQUENCE OF WfFrMapCircuitEntry .1.3.6.1.4.1.18.3.5.9.9.17 |
wfFrMapCircuitEntryFrame Relay VC information mapped to frCircuitEntry WfFrMapCircuitEntry .1.3.6.1.4.1.18.3.5.9.9.17.1 |
wfFrMapCircuitIfIndexThe ifIndex Value of the ifEntry this virtual circuit
is layered onto.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.1 |
wfFrMapCircuitDlciThe Data Link Connection Identifier for this virtual
circuit.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.2 |
wfFrMapCircuitStateIndicates whether the particular virtual circuit is
operational. In the absence of a Data Link Connection
Management Interface, virtual circuit entries (rows)
may be created by setting virtual circuit state to
'active', or deleted by changing Circuit state to
'invalid'.
Whether or not the row actually disappears is left to
the implementation, so this object may actually read as
'invalid' for some arbitrary length of time. It is
also legal to set the state of a virtual circuit to
'inactive' to temporarily disable a given circuit.
The use of 'invalid' is deprecated in this SNMP Version
2 MIB, in favor of frCircuitRowStatus.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.17.1.3 |
wfFrMapCircuitReceivedFECNsNumber of frames received from the network indicating
forward congestion since the virtual circuit was
created. This occurs when the remote DTE sets the FECN
flag, or when a switch in the network enqueues the
frame to a trunk whose transmission queue is
congested.ro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.4 |
wfFrMapCircuitReceivedBECNsNumber of frames received from the network indicating
backward congestion since the virtual circuit was
created. This occurs when the remote DTE sets the BECN
flag, or when a switch in the network receives the
frame from a trunk whose transmission queue is
congestedro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.5 |
wfFrMapCircuitSentFramesThe number of frames sent from this virtual circuit
since it was created. Octets counted are the full
frame relay header and the payload, but do not include
the flag characters or CRC.ro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.6 |
wfFrMapCircuitSentOctetsThe number of octets sent from this virtual circuit
since it was created. Octets counted are the full
frame relay header and the payload, but do not include
the flag characters or CRC.ro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.7 |
wfFrMapCircuitReceivedFramesNumber of frames received over this virtual circuit
since it was created.ro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.8 |
wfFrMapCircuitReceivedOctetsNumber of octets received over this virtual circuit
since it was created. Octets counted include the full
frame relay header, but do not include the flag
characters or the CRC.ro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.9 |
wfFrMapCircuitCreationTimeThe value of sysUpTime when the virtual circuit was
created, whether by the Data Link Connection Management
Interface or by a SetRequest.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.9.17.1.10 |
wfFrMapCircuitLastTimeChangeThe value of sysUpTime when last there was a change in
the virtual circuit statero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.9.17.1.11 |
wfFrMapCircuitCommittedBurstThis variable indicates the maximum amount of data, in
bits, that the network agrees to transfer under normal
conditions, during the measurement interval.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.12 |
wfFrMapCircuitExcessBurstThis variable indicates the maximum amount of
uncommitted data bits that the network will attempt to
deliver over the measurement interval.
By default, if not configured when creating the entry,
the Excess Information Burst Size is set to the value
of ifSpeed.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.13 |
wfFrMapCircuitThroughputThroughput is the average number of 'Frame Relay
Information Field' bits transferred per second across a
user network interface in one direction, measured over
the measurement interval.
If the configured committed burst rate and throughput
are both non-zero, the measurement interval, T, is
T=frCircuitCommittedBurst/frCircuitThroughput.
If the configured committed burst rate and throughput
are both zero, the measurement interval, T, is
T=frCircuitExcessBurst/ifSpeed.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.14 |
wfFrMapCircuitMulticastThis indicates whether this VC is used as a unicast VC
(i.e. not multicast) or the type of multicast service
subscribed toro Enumeration .1.3.6.1.4.1.18.3.5.9.9.17.1.15 |
wfFrMapCircuitTypeIndication of whether the VC was manually created
(static), or dynamically created (dynamic) via the data
link control management interface.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.17.1.16 |
wfFrMapCircuitDiscardsThe number of inbound frames dropped because of format
errors, or because the VC is inactive.ro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.17 |
wfFrMapCircuitReceivedDEsNumber of frames received from the network indicating
that they were eligible for discard since the virtual
circuit was created. This occurs when the remote DTE
sets the DE flag, or when in remote DTE's switch
detects that the frame was received as Excess Burst
data.ro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.18 |
wfFrMapCircuitSentDEsTNumber of frames sent to the network indicating that
they were eligible for discard since the virtual
circuit was created. This occurs when the local DTE
sets the DE flag, indicating that during Network
congestion situations those frames should be discarded
in preference of other frames sent without the DE bit
set.ro Counter .1.3.6.1.4.1.18.3.5.9.9.17.1.19 |
wfFrMapCircuitLogicalIfIndexThe number of times a buffer needed to be stored by the
Multilink Receive logic when the count of buffers stored,
wfFrMlVCStatsReSeqBufferMax,was equal to the maximum allowable
for this circuit, wfFrMlVCCircuitMaxBuffers.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.20 |
wfFrMapCircuitRowStatusThis object is used to create a new row or modify or
destroy an existing row in the manner described in the
definition of the RowStatus textual convention.
Writable objects in the table may be written in any
RowStatus state.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.21 |
wfFrMapCircuitLineNumberInstance identifier. This is the line number on which the
associated Frame Relay interface resides.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.22 |
wfFrMapCircuitLLIndexThe Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.17.1.23 |
wfFrMapErrTableA table containing information about Errors on the
Frame Relay interface. Discontinuities in the counters
contained in this table are the same as apply to the
ifEntry associated with the Interface. SEQUENCE OF WfFrMapErrEntry .1.3.6.1.4.1.18.3.5.9.9.18 |
wfFrMapErrEntryThe error information for a single frame relay
interface. WfFrMapErrEntry .1.3.6.1.4.1.18.3.5.9.9.18.1 |
wfFrMapErrIfIndexThe ifIndex Value of the corresponding ifEntry.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.18.1.1 |
wfFrMapErrTypeThe type of error that was last seen on this interface:
receiveShort: frame was not long enough to allow
demultiplexing - the address field was incomplete,
or for virtual circuits using Multiprotocol over
Frame Relay, the protocol identifier was missing
or incomplete.
receiveLong: frame exceeded maximum length configured for this
interface.
illegalAddress: address field did not match configured format.
unknownAddress: frame received on a virtual circuit which was not
active or administratively disabled.
dlcmiProtoErr: unspecified error occurred when attempting to
interpret link maintenance frame.
dlcmiUnknownIE: link maintenance frame contained an Information
Element type which is not valid for the
configured link maintenance protocol.
dlcmiSequenceErr: link maintenance frame contained a sequence
number other than the expected value.
dlcmiUnknownRpt: link maintenance frame contained a Report Type
Information Element whose value was not valid
for the configured link maintenance protocol.
noErrorSinceReset: no errors have been detected since the last
cold start or warm start.ro Enumeration .1.3.6.1.4.1.18.3.5.9.9.18.1.2 |
wfFrMapErrDataAn octet string containing as much of the error packet
as possible. As a minimum, it must contain the Q.922
Address or as much as was delivered. It is desirable
to include all header and demultiplexing information.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.9.18.1.3 |
wfFrMapErrTimeThe value of sysUpTime at which the error was
detected.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.9.18.1.4 |
wfFrMapErrFaultsThe number of times the interface has gone down since
it was initialized.ro Counter .1.3.6.1.4.1.18.3.5.9.9.18.1.5 |
wfFrMapErrFaultTimeThe value of sysUpTime at the time when the interface
was taken down due to excessive errors. Excessive
errors is defined as the time when a DLCMI exceeds the
frDlcmiErrorThreshold number of errors within
frDlcmiMonitoredEvents. See FrDlcmiEntry for further
details.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.9.18.1.6 |
wfFrMapErrLineNumberInstance identifier. This is the line number on which the
associated Frame Relay interface resides.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.18.1.7 |
wfFrMapErrLLIndexThe Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.9.18.1.8 |
wfFrIfDlcmiEntryThe parameters for a particular Data Link Connection Management Interface WfFrIfDlcmiEntry .wfFrIfDlcmiTable.1 |
wfFrDlcmiDeleteIndication to delete this frame relay interfacerw Enumeration .wfFrIfDlcmiTable.1.1 |
wfFrDlcmiDisableIndicates when a dlcmi entry is to be enabled or disabled.rw Enumeration .wfFrIfDlcmiTable.1.2 |
wfFrDlcmiLineNumberThe line number on which this frame relay interface resides.
This is the first of two instance identifiers.ro INTEGER .wfFrIfDlcmiTable.1.3 |
wfFrDlcmiLLIndexThe Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. For example if Frame Relay is running over
an ATM VC, the LLIndex identifies the ATM VC.ro INTEGER .wfFrIfDlcmiTable.1.4 |
wfFrDlcmiCircuitThe circuit number of this entryro INTEGER .wfFrIfDlcmiTable.1.5 |
wfFrDlcmiManagementTypeThis variable indicates which Data Link Connection Management
scheme is active (and by implication, what DLCI it uses).rw Enumeration .wfFrIfDlcmiTable.1.6 |
wfFrDlcmiStatusIndicates the state of the interface. It is called status
because this is what it was called in the rfc.
FR_STATUS_RUNNING is the sate after the circuit is up (either LMI
successful or there is no DLCMI and the system just comes up).
FR_STATUS_FAULT is a transient state indicating that errors have
caused the circuit to be disabled until DLCMI recovery.
FR_STATUS_INITIALIZING is a transient state indicating that
the interface is trying to come up.
FR_STATUS_NOTPRESENT indicates that the interface is not present.
Likely this will never be seen except upon initial
configuration.ro Enumeration .wfFrIfDlcmiTable.1.7 |
wfFrDlcmiAddressThis states which address format is in use on the FR interface.
The default is Q922rw Enumeration .wfFrIfDlcmiTable.1.8 |
wfFrDlcmiAddressLenThis variable states the address length in octets. In the case
of Q922 format, the length indicates the entire length of the
address includeding the control portion.rw Enumeration .wfFrIfDlcmiTable.1.9 |
wfFrDlcmiPollingIntervalThe number of seconds between successive status enquiry messagesrw INTEGER .wfFrIfDlcmiTable.1.10 |
wfFrDlcmiFullEnquiryIntervalThe number of status enquiry intervals that pass before issuance
of a full status enquiry message.rw INTEGER .wfFrIfDlcmiTable.1.11 |
wfFrDlcmiErrorThresholdThis is the maximum number of unanswered Status Enquiries the
equipment shall accept before declaring the interface down.rw INTEGER .wfFrIfDlcmiTable.1.12 |
wfFrDlcmiMonitoredEventsThis is the number of status polling intervals over
which the error threshold is counted. For example, if
within 'MonitoredEvents' number of events the station
receives 'ErrorThreshold' number of errors, the
interface is marked as down.rw INTEGER .wfFrIfDlcmiTable.1.13 |
wfFrDlcmiMaxSupportedVCsThe maximum number of Virtual Circuits allowed for
this interface. Usually dictated by the Frame Relay
network. The system sets this initially.ro INTEGER .wfFrIfDlcmiTable.1.14 |
wfFrDlcmiVCsConfiguredThe number of VCs that are presently configured on the
interface.ro INTEGER .wfFrIfDlcmiTable.1.15 |
wfFrDlcmiMulticastThis indicates whether the frame relay provider offers a multicastrw Enumeration .wfFrIfDlcmiTable.1.16 |
wfFrDlcmiSeqCountThis station's sequence counter. It represents the next
value to send.ro INTEGER .wfFrIfDlcmiTable.1.17 |
wfFrDlcmiLastReceivedThe sequence number just received from the switch.ro INTEGER .wfFrIfDlcmiTable.1.18 |
wfFrDlcmiPassiveSeqCountThis station's sequence counter for answering status enquiry.ro INTEGER .wfFrIfDlcmiTable.1.19 |
wfFrDlcmiPassiveReceivedThe sequence number just received from the enquring station.ro INTEGER .wfFrIfDlcmiTable.1.20 |
wfFrDlcmiPollsThis is the counter of where we are in the polling cycle.ro INTEGER .wfFrIfDlcmiTable.1.21 |
wfFrDlcmiCongestionDisableThis indicates whether the VCs should use the congestion algorithm or
not. Each VC may be configured to run the algorithm to override this
setting. Those VCs which are configured via the DLCMI interface, will
use this setting as their default.rw Enumeration .wfFrIfDlcmiTable.1.22 |
wfFrDlcmiCongestionTmrThis is the time period over which congestion notifications are counted.
It is also the period during which the VC will cease sending information
before resuming transmission if no congestion notifications are received.
The timer is kept in 1/2 second intervals.rw Enumeration .wfFrIfDlcmiTable.1.23 |
wfFrDlcmiCongestionCtrThis represents the number of congestion notifications, when received
within wfFrDlcmiCongestionTmr time, will result in the VC ceasing
transmissions.rw INTEGER .wfFrIfDlcmiTable.1.24 |
wfFrErrTypeIndicate the type of the last specific monitored error.ro Enumeration .wfFrIfDlcmiTable.1.25 |
wfFrErrDataContains as much of the error packet as possible.ro OCTET STRING .wfFrIfDlcmiTable.1.26 |
wfFrErrTimeThe time the last error occurred.ro TimeTicks (SNMPv2-SMI) .wfFrIfDlcmiTable.1.27 |
wfFrErrDiscardsThe number of inbound frames dropped because of format or other
errors or because the VC was not known.ro Counter .wfFrIfDlcmiTable.1.28 |
wfFrErrDropsThe number of outbound frames dropped. Usually this is due the
specified DLCI being unknown or a broadcast packet is too longro Counter .wfFrIfDlcmiTable.1.29 |
wfFrErrFaultsThe number of times that the Interface has come down due
to errors since the system started. The value is reset when
a restart parameter is modified.ro Counter .wfFrIfDlcmiTable.1.30 |
wfFrErrFaultTimeThe time at which the interface last went down.ro TimeTicks (SNMPv2-SMI) .wfFrIfDlcmiTable.1.31 |
wfFrDlcmiDialFailureDisableOn a dial interface, this indicates whether to time-out if
a full status message is not received. A timeout will cause
the connection to terminate.rw Enumeration .wfFrIfDlcmiTable.1.32 |
wfFrDlcmiInterfaceTypeIndicates the type of interface this is. A normal interface
is not backed up, a primary interface is backed up, and
a backup interface is used for backup. backupDup is a
cue for SiteManager.rw Enumeration .wfFrIfDlcmiTable.1.33 |
wfFrDlcmiBackupFilterCctThe circuit number which defines the ppq filters that
the backup interface will use. If 0, the filters
defined for the default/main circuit will be used.rw INTEGER .wfFrIfDlcmiTable.1.34 |
wfFrDlcmiDebugLevelFor Bay Networks internal use only.rw INTEGER .wfFrIfDlcmiTable.1.35 |
wfFrDlcmiTraceLevelFor Bay Networks internal use only.rw INTEGER .wfFrIfDlcmiTable.1.36 |
wfFrDlcmiCongestionMethodDefault congestion control method to use for all VCs
on this interface.rw Enumeration .wfFrIfDlcmiTable.1.37 |
wfFrDlcmiShapingTmrThe interval, in ticks (1/1024th of a second), that VCs
are processed for traffic shaping.rw INTEGER .wfFrIfDlcmiTable.1.38 |
wfFrDlcmiShapingHiQueueLimitThe total number of buffers that the interface will
allow VCs to queue into the Hi queue. Divided by the
number of traffic shaped VCs to get the number of
buffers allowed per-VC.rw INTEGER .wfFrIfDlcmiTable.1.39 |
wfFrDlcmiShapingNormalQueueLimitThe total number of buffers that the interface will
allow VCs to queue into the Normal queue. Divided by
the number of traffic shaped VCs to get the number of
buffers allowed per-VC.rw INTEGER .wfFrIfDlcmiTable.1.40 |
wfFrDlcmiShapingLoQueueLimitThe total number of buffers that the interface will
allow VCs to queue into the Lo queue. Divided by the
number of traffic shaped VCs to get the number of
buffers allowed per-VC.rw INTEGER .wfFrIfDlcmiTable.1.41 |
wfFrDlcmiXoffDisableIndicates whether to listen(enabled) or ignore(disabled)
XOFF (R-bit) notificationrw Enumeration .wfFrIfDlcmiTable.1.42 |
wfFrDlcmiMissingPollsNumber of times there was no status enquiry response
to a status enquiryro Counter .wfFrIfDlcmiTable.1.43 |
wfFrDlcmiNameUser name for this interface, used by BCCrw DisplayString (SNMPv2-TC) .wfFrIfDlcmiTable.1.44 |
wfFrDlcmiEnableSinglePVCUpdateEnables or disables the processing of Single Async PVC status messages that some
switches use. If disabled, Single Async PVC status messages are ignored. All
status changes in the FR circuit are based on the processing of full status enquiry
response messages.rw Enumeration .wfFrIfDlcmiTable.1.45 |
wfFrDlcmiAnnexSwEnqEnables or disables the processing of status enquiry
on annexdswitch(7) and annexaswitch(8).
If it is enabled and the status enquiry is not received
from the DTE within wfFrDlcmiAnnexSwEnqTmr,
the internal counter will be incremented.
If internal counter exceeds wfFrDlcmiErrorThreshold,
the circuit will be brought down.rw Enumeration .wfFrIfDlcmiTable.1.46 |
wfFrDlcmiAnnexSwEnqTmrSpecify the timeout value in seconds for the status
inquiry on annexdswitch(7) and annexaswitch(8).
It is defaulted to 10 seconds.rw INTEGER .wfFrIfDlcmiTable.1.47 |
wfFrDlcmiExtraStatusInfoEnableIndicates whether or not to process extra lmi ies that may received from the switchrw Enumeration .wfFrIfDlcmiTable.1.48 |