Wellfleet-APPN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-APPN-MIB.
647
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
647 total| Object Name |
|---|
wfAppnNode OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.14.1 |
wfAppnNodeInfoAndCaps OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.1.1 |
wfAppnNodeDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the APPN Node.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.1 |
wfAppnNodeDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable the APPN Node.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.2 |
wfAppnNodeStateThe current state of the APPN CP.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.3 |
wfAppnNodeCpNameAdministratively-assigned network name
for this node in the format NETID.CPNAME.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.1.4 |
wfAppnNodeNetidAdministratively-assigned APPN network identification,
which can be from one to eight characters.
This ID is used with the control point name
to create a fully-qualified control point name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.1.5 |
wfAppnNodeBlockNumThe block number is the first three digits of the node_id.
These 3 hexadecimal digits identify the product.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.1.6 |
wfAppnNodeIdNumThe ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number from the node_id.
This node_id is used to identify the local node and is included
in APPN alerts as well as being included in XIDs. A unique
value is required for connections to SNA sub-area.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.1.7 |
wfAppnNodeTypeType of APPN node, either Network Node, End Node, or Low Entry Networking Node.
This node is always a Network Node.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.8 |
wfAppnNodeUpTimeTime (in hundredths of a second) since this APPN node
was initialized.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.9 |
wfAppnNodeNegotLsIndicates whether this node supports negotiable
link stations.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.10 |
wfAppnNodeSegReasmIndicates whether this node supports segment
reassembly. This is only supported when
segment generation is also supported.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.11 |
wfAppnNodeBindReasmIndicates whether this node supports Bind segment
reassembly. This will only be supported when Bind
segment generation is also supported.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.12 |
wfAppnNodeParallelTgIndicates whether this node supports parallel TGs.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.13 |
wfAppnNodeServiceIndicates whether this node allows call-in from nodes not
defined locally.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.14 |
wfAppnNodeAdaptiveBindPacingIndicates whether this node supports adaptive bind pacing.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.15 |
wfAppnNodeNnRcvRegCharIndicates whether this node supports receiving registered
characteristics.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.16 |
wfAppnNodeNnGatewayIndicates whether this is a gateway node.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.17 |
wfAppnNodeNnCentralDirectoryIndicates whether this node supports central directory
cache.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.18 |
wfAppnNodeNnTreeCacheIndicates whether this node supports Route Tree caching.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.19 |
wfAppnNodeNnTreeUpdateIndicates whether this node supports
incremental_tree_update, which is only
supported when tree caching is supported.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.20 |
wfAppnNodeNnRouteAddResistRoute addition resistance is a value that
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.21 |
wfAppnNodeNnIsrIndicates whether the node supports intermediate
session routing.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.22 |
wfAppnNodeNnFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This object
is the last FRSN sent in a topology update to
adjacent network nodes.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.23 |
wfAppnNodeModeToCosDisableIndicates whether Mode to Cos mapping is supportedro Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.24 |
wfAppnNodeMdsDisableEnables Multiple Domain Supportrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.25 |
wfAppnNodeRegWithCdsDisableEnable Registration of Local and Domain resources with Central Directory Serverrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.26 |
wfAppnNodeAlertQSizeSize of the MDS Send Alert Queue Sizerw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.27 |
wfAppnNodeCosCacheSizeSize of the COS Database weights cache This should be set to the number of COSs definedrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.28 |
wfAppnNodeStoreEndpointRscvsDisableStore RSCVs for Endpoint sessions?rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.29 |
wfAppnNodeNnMaxLocatesMaximum simultaneous Locates that this node will processrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.30 |
wfAppnNodeNnDirCacheSizeMaximum size (entry count) of the Directory Services cache.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.31 |
wfAppnNodeNnMaxDirEntriesMaximum Number of entries in Directory Database. A value of zero means unlimitedrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.32 |
wfAppnNodeNnLocateTimeoutSpecifies a time (in seconds) before a network search will timeout.
A value of zero means no timeoutrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.33 |
wfAppnNodeNnTreeCacheSizeSize of the Topology Database routing tree cache.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.34 |
wfAppnNodeNnTreeCacheUseLimitNumber of times a cached Routing Tree will be used before it is recalculatedrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.35 |
wfAppnNodeNnMaxTdmNodesMaximum number of nodes in the topology database. A value of zero means unlimitedrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.36 |
wfAppnNodeNnMaxTdmTgsMaximum number of TGs in the topology database. A value of zero means unlimitedrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.37 |
wfAppnNodeNnMaxIsrSessionsMaximum number of Intermediate Sessions that this node will routerw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.38 |
wfAppnNodeNnIsrSessionUpperThreshISR Session Threshold at which the node is considered congested.
This value must be less than that of wfAppnNodeNnMaxIsrSessionsrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.39 |
wfAppnNodeNnIsrSessionLowerThreshISR Session Threshold at which the node is no longer considered congested.
This value must be less than that of wfAppnNodeNnIsrSessionUpperThreshrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.40 |
wfAppnNodeNnIsrMaxRuSizeMaximum RU size supported for intermediate sessionsrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.41 |
wfAppnNodeNnIsrRcvPacingWindowReceive Pacing window for intermediate sessionsrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.42 |
wfAppnNodeNnStoreIsrRscvsDisableStore RSCVs for intermediate sessions? (for network monitoring)rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.43 |
wfAppnNodeNnStoreDlurRscvsDisableStore RSCVs for DLUR sessions? (for network monitoring)rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.44 |
wfAppnNodeNnDlurDisableThis enables DLUR support for the Noderw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.45 |
wfAppnNodeTotalAvailableMemoryTotal memory available to APPNro INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.46 |
wfAppnNodeInUseMemoryMemory in use by APPNro INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.47 |
wfAppnNodeMemoryWarningThresholdWarning memory thresholdro INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.48 |
wfAppnNodeMemoryCriticalThresholdCritical memory thresholdro INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.49 |
wfAppnNodeHprDisableThis enables HPR support for the Noderw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.50 |
wfAppnNodeHprPathSwitchCtrlrDisableThis enables HPR Path Switch Controller support for the Noderw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.51 |
wfAppnNodeDebugIpsTraceDisableThis enables tracing of internal messages for debuggingrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.52 |
wfAppnNodeDebugIpsTraceSizeThis specifies the size of the IPS trace file for debuggingrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.53 |
wfAppnNodeDefaultDlusNameFully-qualified name of the default primary DLUS node.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.1.54 |
wfAppnNodeDefaultBackupDlusNameFully-qualified name of the default backup DLUS node.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.1.55 |
wfAppnNodePdLogDisableThis enables logging of problem determination messagesrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.56 |
wfAppnNodeDlusRetryTimeoutThis controls the timeout between retying pipe to the DLUSrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.57 |
wfAppnNodeDlusRetryLimitThis controls the nubmer of retries for the pipe to the DLUS; 65535 means foreverrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.58 |
wfAppnNodeSoloistSlotNumIndicates the slot which runs the appn_cp soloistro INTEGER .1.3.6.1.4.1.18.3.5.14.1.1.59 |
wfAppnNodeBrNNSupportEnables the BrNN support for this node.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.60 |
wfAppnNodeRegisterWithNNUsed for BrNN only. Indicates whether the resources will be registered with
the NNS. When register_local is selected only local LUs ( not domain-served )
will be registered. The NNS will forward all the broadcast searches to the
Node.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.61 |
wfAppnNodeBranchAwarenessEnableIndicates whether the TG between the local Node and served BrNNs will appear
in the topology databaserw Enumeration .1.3.6.1.4.1.18.3.5.14.1.1.62 |
wfAppnNodeDlcTablethis table contains entries for each DLC configured for APPN use SEQUENCE OF WfAppnNodeDlcEntry .1.3.6.1.4.1.18.3.5.14.1.2 |
wfAppnNodeDlcEntryAn entry in wfAppnNodeDlcTable. WfAppnNodeDlcEntry .1.3.6.1.4.1.18.3.5.14.1.2.1 |
wfAppnNodeDlcDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a DLC definition.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.2.1.1 |
wfAppnNodeDlcDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this DLC.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.2.1.2 |
wfAppnNodeDlcNameThis is the 8-character name given to this DLCro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.2.1.3 |
wfAppnNodeDlcStateIndicates the current state of this DLC.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.2.1.4 |
wfAppnNodeDlcTypeThis indicates the type of DLCrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.2.1.5 |
wfAppnNodeDlcNegLsSupportDisableThis indicates if Link Station roles can be negotiated
on this DLCrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.2.1.6 |
wfAppnNodeDlcCctThis is the circuit used by this DLCrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.2.1.7 |
wfAppnNodeDlcDatacomment - Is this used? -P2rw OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.2.1.8 |
wfAppnNodePortTablethis table contains entries for each Port defined SEQUENCE OF WfAppnNodePortEntry .1.3.6.1.4.1.18.3.5.14.1.3 |
wfAppnNodePortEntryThe Port Name is used as the index to this table. WfAppnNodePortEntry .1.3.6.1.4.1.18.3.5.14.1.3.1 |
wfAppnNodePortDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a Port definition.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.1 |
wfAppnNodePortDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Port.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.2 |
wfAppnNodePortNameAdministratively-assigned name for this APPN port.
The name can be from one to eight characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.3.1.3 |
wfAppnNodePortStateIndicates the current state of this port.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.4 |
wfAppnNodePortDlcTypeIndicates the DLC type of this port.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.5 |
wfAppnNodePortPortTypeIdentifies the type of line used by this port.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.6 |
wfAppnNodePortSIMRIMIndicates whether Set Initialization Mode (SIM) and
Receive Initialization Mode (RIM) are supported.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.7 |
wfAppnNodePortLsRoleInitial role for LSs activated through this port,
where 'abm' indicates asynchronous balance mode.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.8 |
wfAppnNodePortMaxRcvBtuSizeMaximum Basic Transmission Size (BTU) that a
link station on this port can receive.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.9 |
wfAppnNodePortMaxIframeWindowMaximum number of I-frames that can be received
by the XID sender before an acknowledgement is received.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.10 |
wfAppnNodePortDefLsGoodXidsThe total number of successful XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.18.3.5.14.1.3.1.11 |
wfAppnNodePortDefLsBadXidsThe total number of unsuccessful XIDs that have occurred
on all defined link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.18.3.5.14.1.3.1.12 |
wfAppnNodePortDynLsGoodXidsThe total number of successful XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.18.3.5.14.1.3.1.13 |
wfAppnNodePortDynLsBadXidsThe total number of unsuccessful XIDs that have occurred
on all dynamic link stations on this port since the last
time this port was started.ro Counter .1.3.6.1.4.1.18.3.5.14.1.3.1.14 |
wfAppnNodePortDlcNameThis is the 8-character name of the DLC which supports this Portrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.3.1.15 |
wfAppnNodePortNumberThis is a unique number for this Port on the DLCrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.16 |
wfAppnNodePortTotLinkActLimThis specifies the maximum link activation limit for this Port.
The maximum value depends on the LS Role and Port Type, as follows:
Port Type LS Role Max Act Lim Inb Out
Switched <any> 1 1 1
Leased Secondary 1 1 0
Leased Negotiable 1 0 0
Leased Primary 256 0 256
SATF <any> 256 128 128rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.17 |
wfAppnNodePortInbLinkActLimThis specifies the maximum inbound link activation
limit for this Port. This value plus next one must total
less than or equal to the total link activation limit.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.18 |
wfAppnNodePortOutLinkActLimThis specifies the maximum outbound link activation
limit for this Port. This value plus previous one must total
less than or equal to the total link activation limit.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.19 |
wfAppnNodePortActXidExchangeLimitThis specifies the maximum number of activation XIDs
which will be sent before the Port is considered inoperablerw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.20 |
wfAppnNodePortNonActXidExchangeLimitThis specifies the maximum number of non-activation XIDs
which will be sent before the Port is considered inoperablerw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.21 |
wfAppnNodePortLsXmitRcvCapThis specifies if the Port can receive Two-Way Simultaneous or
Two-Way Alternaterw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.22 |
wfAppnNodePortTargetPacingCountThis specifies the target pacing count for BINDs on this Portrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.23 |
wfAppnNodePortMaxSendBtuSizeThis specifies the Maximum BTU Size which can be sent out this Portrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.24 |
wfAppnNodePortImplicitCpSessionsThis specifies whether CP-CP sessions are permitted with implicit link stations
on this Portrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.25 |
wfAppnNodePortImplicitLimResourceThis specifies whether implicit link stations on this Port should be defined as
limited resourcesrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.26 |
wfAppnNodePortImplicitEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for use with TGs
to implicit link stations on this Port.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.27 |
wfAppnNodePortImplicitConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value for use with TGs
to implicit link stations on this Port.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.28 |
wfAppnNodePortImplicitByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value for use with TGs
to implicit link stations on this Port.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.29 |
wfAppnNodePortImplicitSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value for use with TGs
to implicit link stations on this Port.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.30 |
wfAppnNodePortImplicitDelayRelative amount of time that it takes for a signal to
travel the length of the logical link.
This is an administratively assigned value for use with TGs
to implicit link stations on this Port.
DEVIATION: 6611 MIB, uses units of microseconds.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.31 |
wfAppnNodePortImplicitUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value for use with TGs
to implicit link stations on this Port.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.32 |
wfAppnNodePortImplicitUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value for use with TGs
to implicit link stations on this Port.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.33 |
wfAppnNodePortImplicitUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value for use with TGs
to implicit link stations on this Port.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.34 |
wfAppnNodePortImplicitHprDisableThis specifies if HPR can be used with implicit
link stations on this Portrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.35 |
wfAppnNodePortImplicitHprLlErrorDisableThis specifies if Link-Level Error recovery is to be used on implicit
link stations which support HPR on this Port.
NOTE: This field does not enable/disable HPRs selective retransmission
algorithm. HPR will perform selective retransmission on data whether or not
error recovery is also done by the link level protocol.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.36 |
wfAppnNodePortImplicitLinkDeactTimeThis indicates the time in seconds before implicit Link Stations on this Port
will be deactivated if it is an HPR limited Resource.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.3.1.37 |
wfAppnNodePortDlcDataThis specifies the local DLC address to be used by this portrw OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.3.1.38 |
wfAppnNodePortHprDlcDataThis specifies the HPR address to be used by this portrw OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.3.1.39 |
wfAppnNodePortImplicitDlurDisableThis specifies if HPR can be used with implicit
link stations on this Portrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.40 |
wfAppnNodePortImplicitUplinkToENFor BrNN specifies whether the implicit Link Stations off this port are
uplink or downlink if the adjacent node is an EN.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.3.1.41 |
wfAppnNodeLsTableThis table contains detail information about
link station configuration SEQUENCE OF WfAppnNodeLsEntry .1.3.6.1.4.1.18.3.5.14.1.4 |
wfAppnNodeLsEntryAn entry in wfAppnNodePortTable.
This table is indexed by the link station name WfAppnNodeLsEntry .1.3.6.1.4.1.18.3.5.14.1.4.1 |
wfAppnNodeLsDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a Link Station definition.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.1 |
wfAppnNodeLsDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Link Station.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.2 |
wfAppnNodeLsNameAdministratively-assigned name for the link station.
The name can be from one to eight characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.4.1.3 |
wfAppnNodeLsPortNameAdministratively-assigned name for the port.
The name can be from one to eight characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.4.1.4 |
wfAppnNodeLsStateState of this link station.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.5 |
wfAppnNodeLsCpNameFully-qualified name of the adjacent node for this link
station. The name can be from three to seventeen characters.
Format is netid.cpname.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.4.1.6 |
wfAppnNodeLsTgNumNumber associated with the TG to this link station.
Range ( 1 - 20) Predefined values for auto-activationrw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.7 |
wfAppnNodeLsLimResourceIndicates whether the link station is
a limited resource. If it is, the TG
is deactivated when there are no sessions.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.8 |
wfAppnNodeLsMigrationIndicates whether this link station will be used
for connections to down-level or migration partners.
1 Indicates that this is a back-level node supporting XID0
protocols.
2 Indicates that this is an up-level node supporting XID3
protocols including the Network Name CV
3 Indicates that this is a back-level node supporting XID3
protocols (but does not include the Network Name CV)
4 Indicates that this is a back-level node which does not
support XID protocols. (This is valid on NONSWITCHED
ports, and is not valid on negotiable ports.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.9 |
wfAppnNodeLsBlockNumThe block number is the first three digits of the node_id.
These 3 hexideimal digits identify the product and are not
configurable.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.4.1.10 |
wfAppnNodeLsIdNumThe ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is include
in APPN alerts as well as being included in XIDs. A unique
value is required for connections to SNA sub-area.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.4.1.11 |
wfAppnNodeLsCpCpSessionIndicates whether CP-CP sessions are
supported by this link station.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.12 |
wfAppnNodeLsTargetPacingCountNumeric value between 0 and 32767 inclusive indicating
the desired pacing window size for BINDs on this TG.
The number is significant only when fixed bind pacing
is being performed.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.13 |
wfAppnNodeLsMaxSendBtuSizeNumeric value between 0 and 4105 inclusive indicating
the desired number of bytes in a Basic Transmission Unit
(BTU) that can be sent on this TG.
This is an administratively assigned value.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.14 |
wfAppnNodeLsEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for use with this TG.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.15 |
wfAppnNodeLsConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.16 |
wfAppnNodeLsByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.17 |
wfAppnNodeLsSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.18 |
wfAppnNodeLsDelayRelative amount of time that it takes for a signal to
travel the length of the logical link.
This is an administratively assigned value associated
with the TG using this link station.
DEVIATION: 6611 MIB, uses units of microseconds.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.19 |
wfAppnNodeLsUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.20 |
wfAppnNodeLsUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.21 |
wfAppnNodeLsUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.22 |
wfAppnNodeLsCpTypeThis specifies the APPN Node type of Link Station.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.23 |
wfAppnNodeLsAutoActivateDisableThis specifies if the link should be automatically activated
when the Port becomes active. Should be disabled if CP-CP sessions
are enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.24 |
wfAppnNodeLsSolicitSscpSessionsDisableThis specifies if SSCP Sessions should be solicited from this
Link Stationrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.25 |
wfAppnNodeLsUseDefaultTgCharsIndicates whether the default TG characteristics specified
for the Port should be used for this link station, or if explicit
TG characteristics will be supplied.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.26 |
wfAppnNodeLsLinkDatathis for Link Address (MAC/SAP, SDLC Address)rw OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.4.1.27 |
wfAppnNodeLsDlurDisableThis specifies if the adjacent Link Station is a node to be serviced by DLUR.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.28 |
wfAppnNodeLsDspuName8-byte name of the downstream PU supported by DLUR.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.4.1.29 |
wfAppnNodeLsDlusNameFully-qualified name of the DLUS node which will serve this DLUR
Link Station.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.4.1.30 |
wfAppnNodeLsBackupDlusNameFully-qualified name of the backup DLUS node which may serve this DLUR
Link Station.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.4.1.31 |
wfAppnNodeLsHprDisableThis specifies if HPR is supported on this Link Stationrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.32 |
wfAppnNodeLsHprLlErrorDisableThis specifies if Link-Level Error recovery is to be used on this
link station.
NOTE: This field does not enable/disable HPRs selective retransmission
algorithm. HPR will perform selective retransmission on data whether or not
error recovery is also done by the link level protocol.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.33 |
wfAppnNodeLsLinkDeactTimeThis indicates the time in seconds before this Link Station will be deactivated
if it is an HPR limited Resource.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.34 |
wfAppnNodeLsLinkRetryCountThis indicates for how many times will APPN CP component retry to
restart the link station before it gives up, 99 default is forever.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.4.1.35 |
wfAppnNodeLsBranchLinkTypeFor BrNN specifies whether the link is an uplink or a downlinkrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.36 |
wfAppnNodeLsAdjBrNNLinkSuppSpecifies whether the adjacent node is required, allowed or
prohibited from being a BrNN ( i.e. an BrNN showing its NN face ).rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.37 |
wfAppnNodeLsDefaultNNSThis field can be set to yes to indicate that the adjacent CP is the
preferred NN serverrw Enumeration .1.3.6.1.4.1.18.3.5.14.1.4.1.38 |
wfAppnNodeLsStatusTableThis table contains detailed status information about link stations SEQUENCE OF WfAppnNodeLsStatusEntry .1.3.6.1.4.1.18.3.5.14.1.5 |
wfAppnNodeLsStatusEntryAn entry in wfAppnNodeLsStatusTable.
This table is indexed by the link station name WfAppnNodeLsStatusEntry .1.3.6.1.4.1.18.3.5.14.1.5.1 |
wfAppnNodeLsStatusNameAdministratively-assigned name for the link station.
The name can be from one to eight characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.5.1.1 |
wfAppnNodeLsStatusPortNameAdministratively-assigned name for the port.
The name can be from one to eight characters.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.5.1.2 |
wfAppnNodeLsStatusDlcTypeThe type of DLC interface, distinguished according to
the protocol immediately 'below' this layer.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.3 |
wfAppnNodeLsStatusDynamicIdentifies whether this resource is a dynamic link station.
Dynamic link stations are created when adjacent nodes
that have not been locally defined establish a connection
with this node.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.4 |
wfAppnNodeLsStatusStateState of this link station.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.5 |
wfAppnNodeLsStatusCpNameFully-qualified name of the adjacent node for this link
station. The name can be from three to seventeen characters.
Format is netid.cpname.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.5.1.6 |
wfAppnNodeLsStatusTgNumNumber associated with the TG to this link station.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.7 |
wfAppnNodeLsStatusLimResourceIndicates whether the link station is
a limited resource. If it is, the TG
is deactivated when there are no sessions.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.8 |
wfAppnNodeLsStatusMigrationIndicates whether this link station will be used
for connections to down-level or migration partners.
1 Indicates that this is a back-level node supporting XID0
protocols.
2 Indicates that this is an up-level node supporting XID3
protocols including the Network Name CV
3 Indicates that this is a back-level node supporting XID3
protocols (but does not include the Network Name CV)
4 Indicates that this is a back-level node which does not
support XID protocols. (This is valid on NONSWITCHED
ports, and is not valid on negotiable ports.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.9 |
wfAppnNodeLsStatusBlockNumThe block number is the first three digits of the node_id.
These 3 hexideimal digits identify the product and are not
configurable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.5.1.10 |
wfAppnNodeLsStatusIdNumThe ID number is the last 5 digits of the node_id.
These 5 hexadecimal digits are administratively defined and
combined with the 3 digit block number form the node_id.
This node_id is used to identify the local node and is include
in APPN alerts as well as being included in XIDs. A unique
value is required for connections to SNA sub-area.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.5.1.11 |
wfAppnNodeLsStatusCpCpSessionIndicates whether CP-CP sessions are
supported by this link station.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.12 |
wfAppnNodeLsStatusTargetPacingCountNumeric value between 0 and 32767 inclusive indicating
the desired pacing window size for BINDs on this TG.
The number is significant only when fixed bind pacing
is being performed.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.13 |
wfAppnNodeLsStatusMaxSendBtuSizeNumeric value between 0 and 32767 inclusive indicating
the desired number of bytes in a Basic Transmission Unit
(BTU) that can be sent on this TG.
This is an administratively assigned value.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.14 |
wfAppnNodeLsStatusEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for use with this TG.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.15 |
wfAppnNodeLsStatusConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.16 |
wfAppnNodeLsStatusByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.17 |
wfAppnNodeLsStatusSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.18 |
wfAppnNodeLsStatusDelayRelative amount of time that it takes for a signal to
travel the length of the logical link.
This is an administratively assigned value associated
with the TG using this link station.
DEVIATION: 6611 MIB, uses units of microseconds.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.19 |
wfAppnNodeLsStatusUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.20 |
wfAppnNodeLsStatusUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.21 |
wfAppnNodeLsStatusUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.22 |
wfAppnNodeLsStatusInXidBytesNumber of XID bytes received.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.23 |
wfAppnNodeLsStatusInMsgBytesNumber of message (I-frame) bytes received.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.24 |
wfAppnNodeLsStatusInXidFramesNumber of XID frames received.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.25 |
wfAppnNodeLsStatusInMsgFramesNumber of message (I-frame) frames received.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.26 |
wfAppnNodeLsStatusOutXidBytesNumber of XID bytes sent.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.27 |
wfAppnNodeLsStatusOutMsgBytesNumber of message (I-frame) bytes sent.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.28 |
wfAppnNodeLsStatusOutXidFramesNumber of XID frames sent.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.29 |
wfAppnNodeLsStatusOutMsgFramesNumber of message (I-frame) frames sent.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.30 |
wfAppnNodeLsStatusEchoRspsNumber of responses returned from adjacent link station.
A response should be returned for each test frame sent by
this node.
Test frames are sent to adjacent nodes periodically to
verify connectivity and to measure that actual round trip
time, that is the time the test frame is sent until the
response is received.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.31 |
wfAppnNodeLsStatusCurrentDelayThe time that it took for the last test signal to be
sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.32 |
wfAppnNodeLsStatusMaxDelayThe longest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds .ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.33 |
wfAppnNodeLsStatusMinDelayThe shortest time it took for a test signal
to be sent and returned from this link station to the
adjacent links station.
This time is represented in milliseconds.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.34 |
wfAppnNodeLsStatusMaxDelayTimeThe time (since system up in hundredth of seconds)
when the longest delay occurred.
This time can be used to identify when this high
water mark occurred in relation to the last initialization
of the APPN node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.35 |
wfAppnNodeLsStatusGoodXidsThe total number of successful XIDs that have occurred
on this link station since the time it was started.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.36 |
wfAppnNodeLsStatusBadXidsThe total number of unsuccessful XIDs that have occurred
on this link station since the time it was started.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.37 |
wfAppnNodeLsStatusActiveSessionsNumber of Active Sessions (Endpoint and ISR) using this Link Station.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.38 |
wfAppnNodeLsStatusInvalidSnaFramesNumber of Invalid SNA Frames received from this Link Station.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.39 |
wfAppnNodeLsStatusInScFramesNumber of Session Control frames received from this Link Station.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.40 |
wfAppnNodeLsStatusOutScFramesNumber of Session Control frames sent to the Link Station.ro Counter .1.3.6.1.4.1.18.3.5.14.1.5.1.41 |
wfAppnNodeLsStatusCpTypeThis specifies the APPN Node type of Link Stationro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.42 |
wfAppnNodeLsStatusStartTimeTime since system startup (in hundreths of seconds)
when Link Station was activated.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.43 |
wfAppnNodeLsStatusStopTimeTime since system startup (in hundreths of seconds)
when Link Station was deactivated.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.44 |
wfAppnNodeLsStatusUpTimeTime (in hundreths of seconds) that this Link Station has been up.ro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.45 |
wfAppnNodeLsStatusDeactCauseDeactivation Causero INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.46 |
wfAppnNodeLsStatusHprSupportIndicates if HPR is supported by this Link Stationro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.47 |
wfAppnNodeLsStatusHprLlErrSupportIndicates if HPR Link-level Error recovery is supported
by this Link Stationro Enumeration .1.3.6.1.4.1.18.3.5.14.1.5.1.48 |
wfAppnNodeLsStatusAnrLabelANR Label of this Link Stationro INTEGER .1.3.6.1.4.1.18.3.5.14.1.5.1.49 |
wfAppnNodeLsStatusLinkDataLink Address, e.g.Mac Address/SAPro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.5.1.50 |
wfAppnNodeCnTableThis Table contains entries for each configured Connection Network SEQUENCE OF WfAppnNodeCnEntry .1.3.6.1.4.1.18.3.5.14.1.6 |
wfAppnNodeCnEntryAn entry in wfAppnNodeCnTable. WfAppnNodeCnEntry .1.3.6.1.4.1.18.3.5.14.1.6.1 |
wfAppnNodeCnDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a Connection
Network definition.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.6.1.1 |
wfAppnNodeCnDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Connection Network.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.6.1.2 |
wfAppnNodeCnFqNameThe Fully-qualified name of the Connection Networkro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.6.1.3 |
wfAppnNodeCnStateState of this connection network.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.6.1.4 |
wfAppnNodeCnEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for use with this
connection network.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.6.1.5 |
wfAppnNodeCnConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.6.1.6 |
wfAppnNodeCnByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.6.1.7 |
wfAppnNodeCnSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.6.1.8 |
wfAppnNodeCnDelayRelative amount of time that it takes for a signal to
travel the length of the logical link.
This is an administratively assigned value associated
with this connection network.
DEVIATION: 6611 MIB, uses units of microseconds.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.6.1.9 |
wfAppnNodeCnUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.6.1.10 |
wfAppnNodeCnUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.6.1.11 |
wfAppnNodeCnUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with the TG using this link station.rw INTEGER .1.3.6.1.4.1.18.3.5.14.1.6.1.12 |
wfAppnNodeCnPortTableTable containing an entry for every Port associated
with a connection network. SEQUENCE OF WfAppnNodeCnPortEntry .1.3.6.1.4.1.18.3.5.14.1.7 |
wfAppnNodeCnPortEntryan entry in wfAppnNodeCnPortTable WfAppnNodeCnPortEntry .1.3.6.1.4.1.18.3.5.14.1.7.1 |
wfAppnNodeCnPortDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a Connection
Network Port instance.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.7.1.1 |
wfAppnNodeCnPortDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Connection Network Port.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.7.1.2 |
wfAppnNodeCnPortCnNameThe name of the cn.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.7.1.3 |
wfAppnNodeCnPortPortNameThe name of the port. FIX to READ_ONLYrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.7.1.4 |
wfAppnNodeCnPortStateState of this connection network.ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.7.1.5 |
wfAppnNodeIsrSessionTableThis table contains entries for every session that is currently
being routed by this Node SEQUENCE OF WfAppnNodeIsrSessionEntry .1.3.6.1.4.1.18.3.5.14.1.8 |
wfAppnNodeIsrSessionEntryThe fqpcid is the index for this table. WfAppnNodeIsrSessionEntry .1.3.6.1.4.1.18.3.5.14.1.8.1 |
wfAppnNodeIsrSessionPcidThis is the PCID of this sessionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.8.1.1 |
wfAppnNodeIsrSessionFqCpNameThis is the Fully-qualified CP name of the node assigning the
PCID for this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.8.1.2 |
wfAppnNodeIsrSessionTransPriorityThis indicates the transmission priority being used by this sessionro Enumeration .1.3.6.1.4.1.18.3.5.14.1.8.1.3 |
wfAppnNodeIsrSessionCosThis indicates the Class-of-Service being used by this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.8.1.4 |
wfAppnNodeIsrSessionLimResourceThis indicates if this session is traversing a Limited Resourcero Enumeration .1.3.6.1.4.1.18.3.5.14.1.8.1.5 |
wfAppnNodeIsrSessionRscvThis is the Route Selection Control Vector in use by this sessionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.8.1.6 |
wfAppnNodeIsrSessionPriSendRuSizeThis is the send RU size used on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.7 |
wfAppnNodeIsrSessionPriRcvRuSizeThis is the receive RU size used on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.8 |
wfAppnNodeIsrSessionPriMaxSendBtuSizeThis is the maximum send BTU size on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.9 |
wfAppnNodeIsrSessionPriMaxRcvBtuSizeThis is the maximum receive BTU size on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.10 |
wfAppnNodeIsrSessionPriMaxSendPacingThis is the maximum send pacing on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.11 |
wfAppnNodeIsrSessionPriCurSendPacingThis is the current send pacing on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.12 |
wfAppnNodeIsrSessionPriMaxRcvPacingThis is the maximum receive pacing on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.13 |
wfAppnNodeIsrSessionPriCurRcvPacingThis is the current receive pacing on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.14 |
wfAppnNodeIsrSessionPriSendFramesThis is the number of Normal-flow frames sent on the primary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.15 |
wfAppnNodeIsrSessionPriSendBytesThis is the number of bytes sent on the primary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.16 |
wfAppnNodeIsrSessionPriSendFmdFramesThis is the number of FMD frames sent on the primary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.17 |
wfAppnNodeIsrSessionPriRcvFramesThis is the number of Normal-flow frames received on the primary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.18 |
wfAppnNodeIsrSessionPriRcvBytesThis is the number of bytes received on the primary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.19 |
wfAppnNodeIsrSessionPriRcvFmdFramesThis is the number of FMD frames received on the primary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.20 |
wfAppnNodeIsrSessionPriSidhThis is the SIDH value used on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.21 |
wfAppnNodeIsrSessionPriSidlThis is the SIDL value used on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.22 |
wfAppnNodeIsrSessionPriOdaiThis is the ODAI value used on the primary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.23 |
wfAppnNodeIsrSessionPriLsNameThis is the adjacent Link Station used on the primary hop of this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.8.1.24 |
wfAppnNodeIsrSessionSecSendRuSizeThis is the send RU size used on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.25 |
wfAppnNodeIsrSessionSecRcvRuSizeThis is the receive RU size used on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.26 |
wfAppnNodeIsrSessionSecMaxSendBtuSizeThis is the maximum send BTU size on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.27 |
wfAppnNodeIsrSessionSecMaxRcvBtuSizeThis is the maximum receive BTU size on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.28 |
wfAppnNodeIsrSessionSecMaxSendPacingThis is the maximum send pacing on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.29 |
wfAppnNodeIsrSessionSecCurSendPacingThis is the current send pacing on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.30 |
wfAppnNodeIsrSessionSecMaxRcvPacingThis is the maximum receive pacing on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.31 |
wfAppnNodeIsrSessionSecCurRcvPacingThis is the current receive pacing on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.32 |
wfAppnNodeIsrSessionSecSendFramesThis is the number of Normal-flow frames sent on the secondary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.33 |
wfAppnNodeIsrSessionSecSendBytesThis is the number of bytes sent on the secondary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.34 |
wfAppnNodeIsrSessionSecSendFmdFramesThis is the number of FMD frames sent on the secondary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.35 |
wfAppnNodeIsrSessionSecRcvFramesThis is the number of Normal-flow frames received on the secondary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.36 |
wfAppnNodeIsrSessionSecRcvBytesThis is the number of bytes received on the secondary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.37 |
wfAppnNodeIsrSessionSecRcvFmdFramesThis is the number of FMD frames received on the secondary hop of this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.8.1.38 |
wfAppnNodeIsrSessionSecSidhThis is the SIDH value used on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.39 |
wfAppnNodeIsrSessionSecSidlThis is the SIDL value used on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.40 |
wfAppnNodeIsrSessionSecOdaiThis is the ODAI value used on the secondary hop of this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.8.1.41 |
wfAppnNodeIsrSessionSecLsNameThis is the adjacent Link Station used on the secondary hop of this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.8.1.42 |
wfAppnNodeIsrSessionRscvTextThis is the Route Selection Control Vector in use by this session, in a DSP_STR formatro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.8.1.43 |
wfAppnNodeEndptSessionTableThis table contains entries for every endpoint session that is currently
active on this Node SEQUENCE OF WfAppnNodeEndptSessionEntry .1.3.6.1.4.1.18.3.5.14.1.9 |
wfAppnNodeEndptSessionEntryThe fqpcid is the index for this table. WfAppnNodeEndptSessionEntry .1.3.6.1.4.1.18.3.5.14.1.9.1 |
wfAppnNodeEndptSessionIdThis is the session ID of this sessionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.9.1.1 |
wfAppnNodeEndptSessionPcidThis is the PCID of this sessionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.9.1.2 |
wfAppnNodeEndptSessionFqCpNameThis is the Fully-qualified CP name of the node assigning the
PCID for this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.9.1.3 |
wfAppnNodeEndptSessionFqPluNameThis is the name of the Partner LU being used by this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.9.1.4 |
wfAppnNodeEndptSessionTransPriorityThis indicates the transmission priority being used by this sessionro Enumeration .1.3.6.1.4.1.18.3.5.14.1.9.1.5 |
wfAppnNodeEndptSessionModeThis indicates the Mode being used by this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.9.1.6 |
wfAppnNodeEndptSessionCosThis indicates the Class-of-Service being used by this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.9.1.7 |
wfAppnNodeEndptSessionLimResourceThis indicates if this session is traversing a Limited Resourcero Enumeration .1.3.6.1.4.1.18.3.5.14.1.9.1.8 |
wfAppnNodeEndptSessionPolarityThis indicates whether the local LU was the BIND sender (Primary)
or if the local LU was the BIND receiver (Secondary)ro Enumeration .1.3.6.1.4.1.18.3.5.14.1.9.1.9 |
wfAppnNodeEndptSessionContentionThis indicates whether this session is a contention-winner or a
contention-loser sessionro Enumeration .1.3.6.1.4.1.18.3.5.14.1.9.1.10 |
wfAppnNodeEndptSessionRscvThis is the Route Selection Control Vector in use by this sessionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.9.1.11 |
wfAppnNodeEndptSessionSendRuSizeThis is the maximum RU size sent on this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.12 |
wfAppnNodeEndptSessionRcvRuSizeThis is the maximum RU size received this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.13 |
wfAppnNodeEndptSessionMaxSendBtuSizeThis is the maximum send BTU size for this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.14 |
wfAppnNodeEndptSessionMaxRcvBtuSizeThis is the maximum receive BTU size for this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.15 |
wfAppnNodeEndptSessionMaxSendPacingThis is the maximum send pacing for this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.16 |
wfAppnNodeEndptSessionCurSendPacingThis is the current send pacing used by this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.17 |
wfAppnNodeEndptSessionMaxRcvPacingThis is the maximum receive pacing for this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.18 |
wfAppnNodeEndptSessionCurRcvPacingThis is the current receive pacing used by this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.19 |
wfAppnNodeEndptSessionSendFramesThis is the number of data frames sent by this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.9.1.20 |
wfAppnNodeEndptSessionSendBytesThis is the number of data bytes sent by this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.9.1.21 |
wfAppnNodeEndptSessionSendFmdFramesThis is the number of FMD frames sent by this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.9.1.22 |
wfAppnNodeEndptSessionRcvFramesThis is the number of data frames received by this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.9.1.23 |
wfAppnNodeEndptSessionRcvBytesThis is the number of bytes received by this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.9.1.24 |
wfAppnNodeEndptSessionRcvFmdFramesThis is the number of FMD frames received by this sessionro Counter .1.3.6.1.4.1.18.3.5.14.1.9.1.25 |
wfAppnNodeEndptSessionSidhThis is the number of bytes received by this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.26 |
wfAppnNodeEndptSessionSidlThis is the SIDL value used by this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.27 |
wfAppnNodeEndptSessionOdaiThis is the ODAI value used by this sessionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.9.1.28 |
wfAppnNodeEndptSessionLsNameThis is the adjacent Link Station used by this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.9.1.29 |
wfAppnNodeEndptSessionRscvTextThis is a text string representing the RSCV used by this sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.9.1.30 |
wfAppnNodeTraceGroup OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.1.10 |
wfAppnNodeTraceDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a Trace.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.10.1 |
wfAppnNodeTraceDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Trace.rw Enumeration .1.3.6.1.4.1.18.3.5.14.1.10.2 |
wfAppnNodeTraceFileThis is the path and file name for the Trace file to be createdrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.10.3 |
wfAppnNodeRtpConnectionTableThis table contains entries for every RTP connection that is currently
active on this Node SEQUENCE OF WfAppnNodeRtpConnectionEntry .1.3.6.1.4.1.18.3.5.14.1.11 |
wfAppnNodeRtpConnectionEntryThe fqpcid is the index for this table. WfAppnNodeRtpConnectionEntry .1.3.6.1.4.1.18.3.5.14.1.11.1 |
wfAppnNodeRtpConnectionNameThis is the local name of the RTP connectionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.11.1.1 |
wfAppnNodeRtpConnectionDestNameThis is the fully-qualified name of the node at the other
end of this RTP connectionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.11.1.2 |
wfAppnNodeRtpConnectionFirstHopLsNameThis is the LS name of the first hop for this RTP connectionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.11.1.3 |
wfAppnNodeRtpConnectionCosNameThis is the Class-of-Service name for this RTP connectionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.11.1.4 |
wfAppnNodeRtpConnectionMaxBtuSizeThis is the maximum size (in bytes) of packets which can be carried
by this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.5 |
wfAppnNodeRtpConnectionLivenessTimerThis is the Liveness Timer (in seconds) for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.6 |
wfAppnNodeRtpConnectionLivenessTimeoutsThis is the number Liveness Timeouts for this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.7 |
wfAppnNodeRtpConnectionLocalTcidThis is the Local TCID for this RTP connectionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.11.1.8 |
wfAppnNodeRtpConnectionRemoteTcidThis is the remote TCID for this RTP connectionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.11.1.9 |
wfAppnNodeRtpConnectionActiveSessionsThis is the number of sessions currently active on this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.10 |
wfAppnNodeRtpConnectionSendBytesThis is the number of bytes that have been sent on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.11 |
wfAppnNodeRtpConnectionSendPacketsThis is the number of packets that have been sent on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.12 |
wfAppnNodeRtpConnectionSendSessionControlFramesThis is the number of Session Control that have been sent on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.13 |
wfAppnNodeRtpConnectionSendRateThis is the current sending rate (in Kbits per second) for this RTP connectionro Gauge .1.3.6.1.4.1.18.3.5.14.1.11.1.14 |
wfAppnNodeRtpConnectionMaxSendRateThis is the Maximum sending rate (in Kbits per second) for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.15 |
wfAppnNodeRtpConnectionMinSendRateThis is the Minimum sending rate (in Kbits per second) for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.16 |
wfAppnNodeRtpConnectionRcvBytesThis is the number of bytes that have been received on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.17 |
wfAppnNodeRtpConnectionRcvPacketsThis is the number of packets that have been received on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.18 |
wfAppnNodeRtpConnectionRcvSessionControlFramesThis is the number of Session Control that have been received on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.19 |
wfAppnNodeRtpConnectionRcvInvalidSnaFramesThis is the number of invalid SNA frames that have been received on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.20 |
wfAppnNodeRtpConnectionRcvRateThis is the current receiving rate (in Kbits per second) for this RTP connectionro Gauge .1.3.6.1.4.1.18.3.5.14.1.11.1.21 |
wfAppnNodeRtpConnectionMaxRcvRateThis is the Maximum receive rate (in Kbits per second) for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.22 |
wfAppnNodeRtpConnectionMinRcvRateThis is the Minimum receive rate (in Kbits per second) for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.23 |
wfAppnNodeRtpConnectionDiscardedBytesThis is the number of bytes that have been discarded on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.24 |
wfAppnNodeRtpConnectionDiscardedPacketsThis is the number of packets that have been discarded on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.25 |
wfAppnNodeRtpConnectionResentBytesThis is the number of bytes that have been retransmitted this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.26 |
wfAppnNodeRtpConnectionResentPacketsThis is the number of packets that have been retransmitted this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.27 |
wfAppnNodeRtpConnectionUpTimeThis is the time (in seconds) that this RTP connection has been activero INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.28 |
wfAppnNodeRtpConnectionRoundTripTimeThis is the last round-trip time (in milliseconds) for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.29 |
wfAppnNodeRtpConnectionSmoothRoundTripTimeThis is the smoothed round-trip time (in milliseconds) for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.30 |
wfAppnNodeRtpConnectionBurstSizeThis is the current burst size for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.31 |
wfAppnNodeRtpConnectionSrtExpiriesThis is the number of times the SR Timer has expired on this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.32 |
wfAppnNodeRtpConnectionShortReqTimerThis is the SHORT_REQ timer duration (in seconds) for this RTP connectionro INTEGER .1.3.6.1.4.1.18.3.5.14.1.11.1.33 |
wfAppnNodeRtpConnectionGapsDetectedThis is the number of gaps detected for this RTP connectionro Counter .1.3.6.1.4.1.18.3.5.14.1.11.1.34 |
wfAppnNodeRtpConnectionRscvThis is the RSCV (in hex) for this RTP connectionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.1.11.1.35 |
wfAppnNodeRtpConnectionRscvTextThis is the RSCV (in a human-readable format) for this RTP connectionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.1.11.1.36 |
wfAppnNn OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.2 |
wfAppnNnTopo OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.2.1 |
wfAppnNnTopoMaxNodesMaximum number of nodes allowed in the APPN topology database
This administratively assigned value must be equal to or
greater than the maximum total number of end nodes and
network nodes.
If the number of nodes exceeds this value, APPN will issue
an Alert and the node can no longer participate as a network
node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.1.1 |
wfAppnNnTopoCurNumNodesCurrent number of nodes in this node's topology database.
If this value exceeds the maximum number of nodes allowed
(NnTopoMaxNodes), APPN alert CPDB002 is
issued.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.1.2 |
wfAppnNnTopoInTdusTotal number of TDUs received from
all adjacent NN since last initialization.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.3 |
wfAppnNnTopoOutTdusTotal number of TDUs built by this node to be sent to
all adjacent NN since last initialization.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.4 |
wfAppnNnTopoNodeLowRsnsTotal number of topology node updates received by this
node with a RSN less than the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs, but this node will
send a TDU with it's higher RSN to the adjacent node that
sent this low RSN.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.5 |
wfAppnNnTopoNodeEqualRsnsTotal number of topology node updates received by this
node with a RSN equal to the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.6 |
wfAppnNnTopoNodeGoodHighRsnsTotal number of topology node updates received by this
node with a RSN greater than the current RSN.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes. It is not required to
send a TDU to the sender of this update because that node
already has the update.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.7 |
wfAppnNnTopoNodeBadHighRsnsTotal number of topology node updates received by this
node with an odd RSN greater than the current RSN.
These updates represent a topology inconsistency detected
by one of the APPN network nodes.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.8 |
wfAppnNnTopoNodeStateUpdatesTotal number of topology Node records built as a result
of internally detected node state changes that affect APPN
topology and routing. Updates are sent via TDUs to all
adjacent network nodes.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.9 |
wfAppnNnTopoNodeErrorsTotal number of topology node records inconsistencies
detected by this node. This occurs when this node attempts
to update its topology database and detects a data
inconsistency. This node will create a TDU with the
current RSN incremented to the next odd number and
broadcast it to all adjacent NNs.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.10 |
wfAppnNnTopoNodeTimerUpdatesTotal number of topology node records built for this
node's resource due to timer updates. Updates are sent via
TDUs to all adjacent network nodes. These updates insure
other network nodes do not delete this node's resources
from their topology database.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.11 |
wfAppnNnTopoNodePurgesTotal number of topology node records purged from this
node's topology database. This occurs when a node has not
been updated in a specified amount of time. The owning
node is responsible for broadcasting updates for its resource
that it wants kept in the network topology.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.12 |
wfAppnNnTopoTgLowRsnsTotal number of topology TG updates received by this
node with a RSN less than the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs, but this node will
send a TDU with it's higher RSN to the sender of the low
RSN.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.13 |
wfAppnNnTopoTgEqualRsnsTotal number of topology TG updates received by this
node with a RSN equal to the current RSN. Both even and
odd RSN are included in this count.
These TDUs are not errors, but result when TDUs are
broadcast to all adjacent network nodes. No update to
this node's topology database occurs.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.14 |
wfAppnNnTopoTgGoodHighRsnsTotal number of topology TG updates received by this
node with a RSN greater than the current RSN.
This results in updating this nodes topology and broadcasting
the update to all adjacent network nodes.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.15 |
wfAppnNnTopoTgBadHighRsnsTotal number of topology TG updates received by this
node with an odd RSN greater than the current RSN.
These updates represent a topology inconsistency detected
by one of the APPN network nodes.
This results in updating this nodes topology and broadcasting
a TDU to all adjacent network nodes.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.16 |
wfAppnNnTopoTgStateUpdatesTotal number of topology TG records built as a result
of internally detected node state changes that affect APPN
topology and routing. Updates are sent via TDUs to all
adjacent network nodes.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.17 |
wfAppnNnTopoTgErrorsTotal number of topology TG records inconsistencies
detected by this node. This occurs when this node attempts
to update its topology database and detects a data
inconsistency. This node will create a TDU with the
current RSN incremented to the next odd number and
broadcast it to all adjacent NNs.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.18 |
wfAppnNnTopoTgTimerUpdatesTotal number of topology TG records built for this
node's resource due to timer updates. Updates are sent via
TDUs to all adjacent network nodes. These updates insure
other network nodes do not delete this node's resources
from their topology database.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.19 |
wfAppnNnTopoTgPurgesTotal number of topology TG records purged from this
node's topology database. This occurs when a TG has not
been updated in a specified amount of time. The owning
node is responsible for broadcasting updates for its resource
that it wants to keep in the network topology.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.20 |
wfAppnNnTopoTotalRouteCalcsNumber of routes calculated for all class of services
since the last initialization.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.21 |
wfAppnNnTopoTotalRouteRejsNumber of route requests for all class of services that
could not be calculated since last initialization.ro Counter .1.3.6.1.4.1.18.3.5.14.2.1.22 |
wfAppnNnAdjNodeTableTable containing an entry for every adjacent node. The information
kept in this table is the last FRSN sent and received,
the status of the CP-CP sessions, and a gauge that indicates
the number of outstanding TDUs. SEQUENCE OF WfAppnNnAdjNodeEntry .1.3.6.1.4.1.18.3.5.14.2.2 |
wfAppnNnAdjNodeEntryThe adjacent node name is the index for this table. WfAppnNnAdjNodeEntry .1.3.6.1.4.1.18.3.5.14.2.2.1 |
wfAppnNnAdjNodeAdjNameAn administratively-assigned fully-qualified
name of this node's adjacent network node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.2.2.1.1 |
wfAppnNnAdjNodeCpCpSessStatusIndicates the state of CP-CP sessions between this node
and adjacent network and end nodes. Inactive indicates no
CP-CP sessions exists between this node and the adjacent
node. Active indicates CP-CP sessons are active using both
the ConWinner and ConLoser sessions. The session initiated
by this node is referred to as the ConWinner session and is
used by this node to send to the adjacent node. The ConLoserr
session is initiated by the adjacent node and is used by this
node to receive from the adjacent node.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.2.1.2 |
wfAppnNnAdjNodeOutOfSeqTdusNumber of out of sequence Topology Database
Updates (TDUs). In a quiesced state, this value is
zero. In normal operation, the value varies
depending on the network environment.ro Gauge .1.3.6.1.4.1.18.3.5.14.2.2.1.3 |
wfAppnNnAdjNodeLastFrsnSentFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last TDU sent to this adjacent node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.2.1.4 |
wfAppnNnAdjNodeLastFrsnRcvdFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last TDU received from this adjacent node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.2.1.5 |
wfAppnNnTopology OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.2.3 |
wfAppnNnTopologyTablePortion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node. SEQUENCE OF WfAppnNnTopologyEntry .1.3.6.1.4.1.18.3.5.14.2.3.1 |
wfAppnNnTopologyEntryThe fully-qualified node name is used to
index this table. WfAppnNnTopologyEntry .1.3.6.1.4.1.18.3.5.14.2.3.1.1 |
wfAppnNnNodeNameAdministratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.2.3.1.1.1 |
wfAppnNnNodeFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.1.1.2 |
wfAppnNnNodeEntryTimeLeftNumber of days before deletion of this
network node entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.1.1.3 |
wfAppnNnNodeTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.4 |
wfAppnNnNodeRsnResource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.1.1.5 |
wfAppnNnNodeRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.1.1.6 |
wfAppnNnNodeCongestedIndicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.7 |
wfAppnNnNodeIsrDepletedIndicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.8 |
wfAppnNnNodeEndptDepletedIndicates whether session endpoint resources are depleted.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.9 |
wfAppnNnNodeQuiescingIndicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.10 |
wfAppnNnNodeGatewayIndicates whether the node provide gateway functions.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.11 |
wfAppnNnNodeCentralDirectoryIndicates whether the node is central directory.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.12 |
wfAppnNnNodeIsrIndicates whether the node supports intermediate session
routing (ISR).ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.13 |
wfAppnNnNodeChainSupportIndicates whether this node supports chaining.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.14 |
wfAppnNnNodeHprBaseIndicates whether this node supports HPR base functionality.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.15 |
wfAppnNnNodeRtpTowerIndicates whether this node supports RTP tower functionality.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.1.1.16 |
wfAppnNnTgTopologyTablePortion of the APPN topology database
that describes all of the APPN transmissions groups
used by the APPN network nodes. SEQUENCE OF WfAppnNnTgTopologyEntry .1.3.6.1.4.1.18.3.5.14.2.3.2 |
wfAppnNnTgTopologyEntryThis table requires three indexes to provide a
unique index. The indexes are the owning or originating
CPname, the destination CPname, and the TG number. WfAppnNnTgTopologyEntry .1.3.6.1.4.1.18.3.5.14.2.3.2.1 |
wfAppnNnTgOwnerAdministratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.2.3.2.1.1 |
wfAppnNnTgDestAdministratively-assigned fully-qualified
network name for the destination node for this TG.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.2.3.2.1.2 |
wfAppnNnTgNumNumber associated with this
transmission group. Range is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.3 |
wfAppnNnTgFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.4 |
wfAppnNnTgEntryTimeLeftNumber of days before deletion of this
network node TG entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.5 |
wfAppnNnTgDestVirtualIndicates whether the destination node is
a virtual node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.6 |
wfAppnNnTgDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits.ro OCTET STRING .1.3.6.1.4.1.18.3.5.14.2.3.2.1.7 |
wfAppnNnTgRsnCurrent owning node's resource sequence number
for this resource.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.8 |
wfAppnNnTgOperationalIndicates whether the transmission group
is operational.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.9 |
wfAppnNnTgQuiescingIndicates whether the transmission group
is quiescing.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.10 |
wfAppnNnTgCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.11 |
wfAppnNnTgEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for this TG.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.12 |
wfAppnNnTgConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.13 |
wfAppnNnTgByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.14 |
wfAppnNnTgSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.15 |
wfAppnNnTgDelayRelative amount of time that it takes for a signal to
travel the length of the logical link.
This is an administratively assigned value associated
with this TG.
DEVIATION: 6611 MIB, uses units of microseconds.rw Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.2.1.16 |
wfAppnNnTgModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.17 |
wfAppnNnTgUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.18 |
wfAppnNnTgUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.19 |
wfAppnNnTgUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.20 |
wfAppnNnTgHprBaseIndicates whether HPR base functionality is supported
on this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.21 |
wfAppnNnTgRtpTowerIndicates whether RTP Tower functionality is supported
on this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.2.1.22 |
wfAppnNnTopologyFRTablePortion of the APPN routing table
that describes all of the APPN network nodes
and virtual nodes known to this node. SEQUENCE OF WfAppnNnTopologyFREntry .1.3.6.1.4.1.18.3.5.14.2.3.3 |
wfAppnNnTopologyFREntryThe fully-qualified node name is used to
index this table. WfAppnNnTopologyFREntry .1.3.6.1.4.1.18.3.5.14.2.3.3.1 |
wfAppnNnNodeFRNameAdministratively-assigned network name that is locally
defined at each network node in the format NETID.CPNAME.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.2.3.3.1.1 |
wfAppnNnNodeFRFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.3.1.2 |
wfAppnNnNodeFREntryTimeLeftNumber of days before deletion of this
network node entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.3.1.3 |
wfAppnNnNodeFRTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.4 |
wfAppnNnNodeFRRsnResource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.3.1.5 |
wfAppnNnNodeFRRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.3.1.6 |
wfAppnNnNodeFRCongestedIndicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.7 |
wfAppnNnNodeFRIsrDepletedIndicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.8 |
wfAppnNnNodeFREndptDepletedIndicates whether session endpoint resources are depleted.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.9 |
wfAppnNnNodeFRQuiescingIndicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.10 |
wfAppnNnNodeFRGatewayIndicates whether the node provide gateway functions.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.11 |
wfAppnNnNodeFRCentralDirectoryIndicates whether the node is central directory.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.12 |
wfAppnNnNodeFRIsrIndicates whether the node supports intermediate session
routing (ISR).ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.13 |
wfAppnNnNodeFRChainSupportIndicates whether this node supports chaining.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.14 |
wfAppnNnNodeFRHprBaseIndicates whether this node supports HPR base functionality.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.15 |
wfAppnNnNodeFRRtpTowerIndicates whether this node supports RTP tower functionality.ro Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.3.1.16 |
wfAppnNnTgTopologyFRTableThis table contains entries which describes the TGs associated with
the Network Nodes in the network SEQUENCE OF WfAppnNnTgTopologyFREntry .1.3.6.1.4.1.18.3.5.14.2.3.4 |
wfAppnNnTgTopologyFREntryThis table requires four indexes to provide a
unique index. The indexes are the FRSN, the owning or originating
CPname, the destination CPname, and the TG number. WfAppnNnTgTopologyFREntry .1.3.6.1.4.1.18.3.5.14.2.3.4.1 |
wfAppnNnTgFROwnerAdministratively-assigned name for the
originating node for this TG. The format
is NETID.CPNAME and is the same name
specified in the node table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.2.3.4.1.1 |
wfAppnNnTgFRDestAdministratively-assigned fully-qualified
network name for the destination node for this TG.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.2.3.4.1.2 |
wfAppnNnTgFRNumNumber associated with this
transmission group. Range is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.3 |
wfAppnNnTgFRFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This FRSN
indicates the last time this resource was updated at
this node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.4 |
wfAppnNnTgFREntryTimeLeftNumber of days before deletion of this
network node TG entry. Range is 0-31.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.5 |
wfAppnNnTgFRDestVirtualIndicates whether the destination node is
a virtual node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.6 |
wfAppnNnTgFRDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits.ro OCTET STRING .1.3.6.1.4.1.18.3.5.14.2.3.4.1.7 |
wfAppnNnTgFRRsnCurrent owning node's resource sequence number
for this resource.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.8 |
wfAppnNnTgFROperationalIndicates whether the transmission group
is operational.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.9 |
wfAppnNnTgFRQuiescingIndicates whether the transmission group
is quiescing.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.10 |
wfAppnNnTgFRCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.11 |
wfAppnNnTgFREffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for this TG.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.12 |
wfAppnNnTgFRConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.13 |
wfAppnNnTgFRByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.14 |
wfAppnNnTgFRSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.15 |
wfAppnNnTgFRDelayRelative amount of time that it takes for a signal to
travel the length of the logical link.
This is an administratively assigned value associated
with this TG.
DEVIATION: 6611 MIB, uses units of microseconds.rw Enumeration .1.3.6.1.4.1.18.3.5.14.2.3.4.1.16 |
wfAppnNnTgFRModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.17 |
wfAppnNnTgFRUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.18 |
wfAppnNnTgFRUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.19 |
wfAppnNnTgFRUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.20 |
wfAppnNnTgFRHprBaseIndicates whether HPR base functionality is supported
on this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.21 |
wfAppnNnTgFRRtpTowerIndicates whether RTP Tower functionality is supported
on this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.2.3.4.1.22 |
wfAppnLocalTopology OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.3 |
wfAppnLocalThisNode OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.3.1 |
wfAppnLocalInfo OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.3.1.1 |
wfAppnLocalNodeNameAdministratively-assigned network name
for this node in the format NETID.CPNAME.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.3.1.1.1 |
wfAppnLocalNodeTypeType of APPN node.ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.2 |
wfAppnLocalNnRsnResource sequence number that is assigned and
controlled by the network node that owns this
resource. This is always an even 32-bit number
unless an error has occurred.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.1.3 |
wfAppnLocalNnRouteAddResistRoute addition resistance
indicates the relative desirability
of using this node for intermediate session traffic.
The value, which can be any integer 0-255,
is used in route computation. The lower the value,
the more desirable the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.1.4 |
wfAppnLocalNnCongestedIndicates whether this node is congested.
This node is not be included in route selection
by other nodes when this congestion exists.ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.5 |
wfAppnLocalNnIsrDepletedIndicates whether intermediate session
routing resources are depleted. This node is
not included in intermediate route selection
by other nodes when resources are depleted.ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.6 |
wfAppnLocalNnEndptDepletedIndicates whether session endpoint resources are depleted.ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.7 |
wfAppnLocalNnQuiescingIndicates whether the node is quiescing.
This node is not included in route selection
by other nodes when the node is quiescing.ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.8 |
wfAppnLocalNnGatewayIndicates whether the node provide gateway functions.ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.9 |
wfAppnLocalNnCentralDirectoryIndicates whether the node is central directory.ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.10 |
wfAppnLocalNnIsrIndicates whether the node supports intermediate session
routing (ISR).ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.11 |
wfAppnLocalNnChainSupportIndicates whether the node supports chaining.ro Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.1.12 |
wfAppnLocalNnFrsnFlow reduction sequence numbers (FRSNs) are associated
with Topology Database Updates (TDUs) and are unique
only within each APPN network node. A TDU can be
associated with multiple APPN resources. This object
is the last FRSN sent in a topology update to
adjacent network nodes.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.1.13 |
wfAppnLocalTgTableTG Table describes all of the TGs owned by this
node. The TG destination can be a virtual
node, network node, len, or end node. SEQUENCE OF WfAppnLocalTgEntry .1.3.6.1.4.1.18.3.5.14.3.1.3 |
wfAppnLocalTgEntryThis table is indexed by the destination CPname
and the TG number. WfAppnLocalTgEntry .1.3.6.1.4.1.18.3.5.14.3.1.3.1 |
wfAppnLocalTgDestAdministratively-assigned fully-qualified
network name for the destination node for this TG.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.3.1.3.1.1 |
wfAppnLocalTgNumNumber associated with this
transmission group. Range is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.2 |
wfAppnLocalTgDestVirtualIndicates whether the destination node is
a virtual node.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.3 |
wfAppnLocalTgDlcDataDLC specific data related to the link connection
network.
Token-Ring - MAC/SAP
X.25 Switched - dial digits
X.21 Switched - dial digits
Circuit Swtch - dial digits.ro OCTET STRING .1.3.6.1.4.1.18.3.5.14.3.1.3.1.4 |
wfAppnLocalTgRsnCurrent owning node's resource sequence number
for this resource.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.5 |
wfAppnLocalTgOperationalIndicates whether the transmission group
is operational.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.6 |
wfAppnLocalTgQuiescingIndicates whether the transmission group
is quiescing.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.7 |
wfAppnLocalTgCpCpSessionIndicates whether CP-CP sessions are supported on this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.8 |
wfAppnLocalTgEffCapThe effective capacity is an integer value that indicates
the kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
This is an administratively assigned value for this TG.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.9 |
wfAppnLocalTgConnCostCost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255, which indicates maximum cost.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.10 |
wfAppnLocalTgByteCostRelative cost of transmitting a byte over this link.
Range is from 0 (lowest cost) to 255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.11 |
wfAppnLocalTgSecurityThe security is represented as an integer with a range of
1 thru 255 with the most common values enumerated as
defined above.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.12 |
wfAppnLocalTgDelayRelative amount of time that it takes for a signal to
travel the length of the logical link, with a range of
0 through 255 with some of the more common values enumerated.
This is an administratively assigned value associated
with this TG.
DEVIATION: 6611 MIB, uses units of microseconds.rw Enumeration .1.3.6.1.4.1.18.3.5.14.3.1.3.1.13 |
wfAppnLocalTgModemClassThis is used to have multiple images for a
connection network. For a connection network
it is the same as in the TG vector; for
a non-connection network it is X'00'.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.14 |
wfAppnLocalTgUsr1First user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.15 |
wfAppnLocalTgUsr2Second user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.16 |
wfAppnLocalTgUsr3Third user-defined TG characteristic for this TG with
a range of 0-255.
This is an administratively assigned value associated
with this TG.ro INTEGER .1.3.6.1.4.1.18.3.5.14.3.1.3.1.17 |
wfAppnDirectory OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.4 |
wfAppnDirectoryPerformance OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.4.1 |
wfAppnDirMaxCachesMaximum number of cache entries allowed. This
is an administratively assigned value.ro INTEGER .1.3.6.1.4.1.18.3.5.14.4.1.1 |
wfAppnDirCurCachesCurrent number of cache entries.ro Gauge .1.3.6.1.4.1.18.3.5.14.4.1.2 |
wfAppnDirCurHomeEntriesCurrent number of home entries.ro Gauge .1.3.6.1.4.1.18.3.5.14.4.1.3 |
wfAppnDirRegEntriesCurrent number of registered entries.ro Gauge .1.3.6.1.4.1.18.3.5.14.4.1.4 |
wfAppnDirInLocatesNumber of directed locates received.ro Counter .1.3.6.1.4.1.18.3.5.14.4.1.5 |
wfAppnDirInBcastLocatesNumber of broadcast locates received.ro Counter .1.3.6.1.4.1.18.3.5.14.4.1.6 |
wfAppnDirOutLocatesNumber of directed locates sent.ro Counter .1.3.6.1.4.1.18.3.5.14.4.1.7 |
wfAppnDirOutBcastLocatesNumber of broadcast locates sent.ro Counter .1.3.6.1.4.1.18.3.5.14.4.1.8 |
wfAppnDirNotFoundLocatesNumber of directed locates returned with a 'not found'.ro Counter .1.3.6.1.4.1.18.3.5.14.4.1.9 |
wfAppnDirNotFoundBcastLocatesNumber of broadcast locates returned with
a not found.ro Counter .1.3.6.1.4.1.18.3.5.14.4.1.10 |
wfAppnDirLocateOutstandsCurrent number of outstanding locates,
both directed and broadcast. This value
varies. A value of zero indicates
that no locates are unanswered.ro Gauge .1.3.6.1.4.1.18.3.5.14.4.1.11 |
wfAppnDirTableTable containing information about
all known LUs and TPs. SEQUENCE OF WfAppnDirEntry .1.3.6.1.4.1.18.3.5.14.4.2 |
wfAppnDirEntryThis table is indexed by the LU name. WfAppnDirEntry .1.3.6.1.4.1.18.3.5.14.4.2.1 |
wfAppnDirLuNameFully-qualified network LU name in the
domain of the serving network node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.4.2.1.1 |
wfAppnDirServerNameFully-qualified control point (CP) name of the
network node server. For unassociated end node
entries, the end node fully-qualified name
is returned.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.4.2.1.2 |
wfAppnDirLuOwnerNameFully-qualified CP name of the node at which
the LU is located. This name is the same as the
serving NN name when the LU is located at a
network node or an unassociated end node. It is
also the same as the fully-qualified LU name
when this is the control point LU for this node.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.4.2.1.3 |
wfAppnDirLocationSpecifies the location of the LU.ro Enumeration .1.3.6.1.4.1.18.3.5.14.4.2.1.4 |
wfAppnDirTypeDirectory types are:
1 - Home
The LU is in the domain of the local network node
and the LU information has been configured at the
local node.
2 - Cache
The LU has previously been located by a broadcast
search and the location information has been saved.
3 - Register
The LU is at an end node that is in the domain
of the local network node. Registered entries
are registered by the served end node.ro Enumeration .1.3.6.1.4.1.18.3.5.14.4.2.1.5 |
wfAppnDirWildCard1 - Other means unknown type of LU entry.
2 - Expliced-entry means the full LUNAME will be used
for locating this LU.
3 - Partial-wildcard means only the non-blank portions
of the LUNAME will be used for locating this LU.
4 - Full-wildcard means all LUNAMES will be directed
to this LU.ro Enumeration .1.3.6.1.4.1.18.3.5.14.4.2.1.6 |
wfAppnDirDefineTablethis table contains entries which define Directory entries SEQUENCE OF WfAppnDirDefineEntry .1.3.6.1.4.1.18.3.5.14.4.3 |
wfAppnDirDefineEntryAn entry in wfAppnDirDefineTable. WfAppnDirDefineEntry .1.3.6.1.4.1.18.3.5.14.4.3.1 |
wfAppnDirDefineDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a Directory
Entry instance.rw Enumeration .1.3.6.1.4.1.18.3.5.14.4.3.1.1 |
wfAppnDirDefineDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Directory Entry.rw Enumeration .1.3.6.1.4.1.18.3.5.14.4.3.1.2 |
wfAppnDirDefineResourceNameThis specifies the resource name in the local Directoryro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.4.3.1.3 |
wfAppnDirDefineResourceTypeThis specifies the resource type in the local Directoryrw Enumeration .1.3.6.1.4.1.18.3.5.14.4.3.1.4 |
wfAppnDirDefineParentNameThis specifies the name of the parent of the resource, if the resource
is an LUrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.4.3.1.5 |
wfAppnDirDefineParentTypeThis specifies the type of the parent of the resource, if the resource
is an LUrw Enumeration .1.3.6.1.4.1.18.3.5.14.4.3.1.6 |
wfAppnCos OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.5 |
wfAppnCosModeTableTable representing all of the defined
mode names for this node. The table
contains the matching COS name. SEQUENCE OF WfAppnCosModeEntry .1.3.6.1.4.1.18.3.5.14.5.1 |
wfAppnCosModeEntryThis table is indexed by the Mode Name. WfAppnCosModeEntry .1.3.6.1.4.1.18.3.5.14.5.1.1 |
wfAppnCosModeNameAdministratively-assigned name for this
mode entry.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.5.1.1.1 |
wfAppnCosModeCosNameAn administratively assigned name for this
Class of Service.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.5.1.1.2 |
wfAppnCosNameTableTable representing all of the defined class-of-service
names for this node. The COS node and TG tables are
accessed using the same index, which is the COS name. SEQUENCE OF WfAppnCosNameEntry .1.3.6.1.4.1.18.3.5.14.5.2 |
wfAppnCosNameEntryThe COS name is the index to this table. WfAppnCosNameEntry .1.3.6.1.4.1.18.3.5.14.5.2.1 |
wfAppnCosNameAdministratively-assigned name for this
class of service.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.5.2.1.1 |
wfAppnCosTransPriorityTransmission priority for this
class of service. Values are:
Low
Medium
High
Networkro Enumeration .1.3.6.1.4.1.18.3.5.14.5.2.1.2 |
wfAppnCosNodeRowTableThis table contains all node-row information for all
class of service in this node. SEQUENCE OF WfAppnCosNodeRowEntry .1.3.6.1.4.1.18.3.5.14.5.3 |
wfAppnCosNodeRowEntryThe COS name is the first index and a integer
is the second index to insure a unique index. WfAppnCosNodeRowEntry .1.3.6.1.4.1.18.3.5.14.5.3.1 |
wfAppnCosNodeRowNameAdministratively-assigned name for this
class of service.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.5.3.1.1 |
wfAppnCosNodeRowIndexIndex of COS name. This same value is used
to access the node and TG COS tables.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.3.1.2 |
wfAppnCosNodeRowWgtWeight to be associated with the nodes
that fit the criteria specified by this node row.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.3.1.3 |
wfAppnCosNodeRowResistMinMinimum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.3.1.4 |
wfAppnCosNodeRowResistMaxMaximum route addition resistance value
for this node. Range of values is 0-255.
The lower the value, the more desirable
the node is for intermediate routing.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.3.1.5 |
wfAppnCosNodeRowMinCongestAllowIndicates whether low congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.ro Enumeration .1.3.6.1.4.1.18.3.5.14.5.3.1.6 |
wfAppnCosNodeRowMaxCongestAllowIndicates whether high congestion will be
tolerated. The minimum and maximum parameters
will allow specifying either low-congested,
high-congested, or either to be used.ro Enumeration .1.3.6.1.4.1.18.3.5.14.5.3.1.7 |
wfAppnCosTgRowTableTable containing all the Tg-row information for all
class of service defined in this node. SEQUENCE OF WfAppnCosTgRowEntry .1.3.6.1.4.1.18.3.5.14.5.4 |
wfAppnCosTgRowEntryThe TgRowName and the TgRowIndex are the index
for this table. WfAppnCosTgRowEntry .1.3.6.1.4.1.18.3.5.14.5.4.1 |
wfAppnCosTgRowNameAdministratively-assigned name for this
class of service.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.5.4.1.1 |
wfAppnCosTgRowIndexIndex of COS name. This same value is used
to access the node and TG COS tables.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.2 |
wfAppnCosTgRowWgtWeight to be associated with the nodes
that fit the criteria specified by this tg-row.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.3 |
wfAppnCosTgRowEffCapMinMinimum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.4 |
wfAppnCosTgRowEffCapMaxMaximum acceptable speed for this Class of Service.
The effective capacity is an integer value that indicates
the actual kilo bits per second.
It is derived from the link bandwidth and maximum load
factor with the range of 0 thru 255.
DEVIATION: 6611 mib uses range of 0 thru 603,979,776.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.5 |
wfAppnCosTgRowConnCostMinMinimum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.6 |
wfAppnCosTgRowConnCostMaxMaximum acceptable cost per connect time
for this Class of Service.
Cost per connect time: a value representing
the relative cost per unit of time to use
the TG. Range is from 0, which means no cost,
to 255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.7 |
wfAppnCosTgRowByteCostMinMinimum acceptable cost per byte
for this Class of Service.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.8 |
wfAppnCosTgRowByteCostMaxMaximum acceptable cost per byte
for this Class of Service.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.9 |
wfAppnCosTgRowSecurityMinMinimum acceptable security
for this Class of Service.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.10 |
wfAppnCosTgRowSecurityMaxMaximum acceptable security
for this Class of Service.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.11 |
wfAppnCosTgRowDelayMinMinimum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link.
DEVIATION: 6611 MIB, uses units of microseconds.rw Enumeration .1.3.6.1.4.1.18.3.5.14.5.4.1.12 |
wfAppnCosTgRowDelayMaxMaximum acceptable propagation delay for this class of service.
Relative amount of time that it takes for a signal to travel
the length of the logical link.
DEVIATION: 6611 MIB, uses units of microseconds.rw Enumeration .1.3.6.1.4.1.18.3.5.14.5.4.1.13 |
wfAppnCosTgRowUsr1MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.14 |
wfAppnCosTgRowUsr1MaxMaximum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.15 |
wfAppnCosTgRowUsr2MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.16 |
wfAppnCosTgRowUsr2MaxMaximum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.17 |
wfAppnCosTgRowUsr3MinMinimum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.18 |
wfAppnCosTgRowUsr3MaxMaximum acceptable value for this
user defined characteristic.
Range of values is 0-255.ro INTEGER .1.3.6.1.4.1.18.3.5.14.5.4.1.19 |
wfAppnTps OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.6 |
wfAppnTpPingTableThis table contains an entry for each instance of the APING application SEQUENCE OF WfAppnTpPingEntry .1.3.6.1.4.1.18.3.5.14.6.1 |
wfAppnTpPingEntryAn entry in wfAppnTpPingTable. WfAppnTpPingEntry .1.3.6.1.4.1.18.3.5.14.6.1.1 |
wfAppnTpPingDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a APING instance.rw Enumeration .1.3.6.1.4.1.18.3.5.14.6.1.1.1 |
wfAppnTpPingDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this APING instance.rw Enumeration .1.3.6.1.4.1.18.3.5.14.6.1.1.2 |
wfAppnTpPingIndexThis is the index of the Ping entryro INTEGER .1.3.6.1.4.1.18.3.5.14.6.1.1.3 |
wfAppnTpPingFqPluNameThis is the Fully-Qualified name of the Partner LU running the APINGD TPrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.6.1.1.4 |
wfAppnTpPingDataLengthThis is the length of the test data to be sent to the LU being PING-edrw INTEGER .1.3.6.1.4.1.18.3.5.14.6.1.1.5 |
wfAppnTpPingConsecutiveSendsThis specifies the number of consecutive sends that will be issuedrw INTEGER .1.3.6.1.4.1.18.3.5.14.6.1.1.6 |
wfAppnTpPingEchoDisableThis specifies whether the Target of the PING will be requested
to echo the datarw Enumeration .1.3.6.1.4.1.18.3.5.14.6.1.1.7 |
wfAppnTpPingIterationsThis specifies the number of times the PING should be repeatedrw INTEGER .1.3.6.1.4.1.18.3.5.14.6.1.1.8 |
wfAppnTpPingPartnerTpNameThis specifies the partner TP name to ping. If no name is specified
'APINGD' will be usedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.6.1.1.9 |
wfAppnTpPingModeThis specifies the mode to be used for this PINGrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.6.1.1.10 |
wfAppnTpPingStateThis indicates the current state of the PING requestro Enumeration .1.3.6.1.4.1.18.3.5.14.6.1.1.11 |
wfAppnTpPingAllocTimeThis indicates the time (in milliseconds) it took to allocate the
PING conversationro INTEGER .1.3.6.1.4.1.18.3.5.14.6.1.1.12 |
wfAppnTpPingMinTimeThis indicates the minimum time (in milliseconds) it took to
PING the partnerro INTEGER .1.3.6.1.4.1.18.3.5.14.6.1.1.13 |
wfAppnTpPingMaxTimeThis indicates the maximum time (in milliseconds) it took to
PING the partnerro INTEGER .1.3.6.1.4.1.18.3.5.14.6.1.1.14 |
wfAppnTpPingAvgTimeThis indicates the average time (in milliseconds) it took to
PING the partnerro INTEGER .1.3.6.1.4.1.18.3.5.14.6.1.1.15 |
wfAppnTpPingPartnerVersionThis is the version string returned by the partnerro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.6.1.1.16 |
wfAppnTpTunnelTableThis table contains entries for each APPN Tunnel SEQUENCE OF WfAppnTpTunnelEntry .1.3.6.1.4.1.18.3.5.14.6.3 |
wfAppnTpTunnelEntryAn entry in wfAppnTpTunnelTable. WfAppnTpTunnelEntry .1.3.6.1.4.1.18.3.5.14.6.3.1 |
wfAppnTpTunnelDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete an APPN Tunnel
instance.rw Enumeration .1.3.6.1.4.1.18.3.5.14.6.3.1.1 |
wfAppnTpTunnelDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this APPN Tunnel
instance.rw Enumeration .1.3.6.1.4.1.18.3.5.14.6.3.1.2 |
wfAppnTpTunnelStateThe current state of the Tunnel.ro Enumeration .1.3.6.1.4.1.18.3.5.14.6.3.1.3 |
wfAppnTpTunnelCctThis is the circuit number of the circuit running over this APPN Tunnelro INTEGER .1.3.6.1.4.1.18.3.5.14.6.3.1.4 |
wfAppnTpTunnelFqPluNameThis specifies the Partner LU for this APPN Tunnelrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.6.3.1.5 |
wfAppnTpTunnelModeNameThis specifies the Mode for this APPN Tunnelrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.6.3.1.6 |
wfAppnTpTunnelMediaThis specifies the media to be emulated by this tunnelrw Enumeration .1.3.6.1.4.1.18.3.5.14.6.3.1.7 |
wfAppnTpTunnelMacAddressThis specifies the local MAC address to be used by this tunnelrw OCTET STRING .1.3.6.1.4.1.18.3.5.14.6.3.1.8 |
wfAppnTpTunnelTxFramesThis indicates the number of frames transmitted over this APPN Tunnelro Counter .1.3.6.1.4.1.18.3.5.14.6.3.1.9 |
wfAppnTpTunnelRxFramesThis indicates the number of frames received over this APPN Tunnelro Counter .1.3.6.1.4.1.18.3.5.14.6.3.1.10 |
wfAppnTpTunnelDropFramesThis indicates the number of frames dropped by this APPN Tunnelro Counter .1.3.6.1.4.1.18.3.5.14.6.3.1.11 |
wfAppnDlu OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.7 |
wfAppnDlurLuTableThis table contains an entry for each LU currently being serviced by DLUR SEQUENCE OF WfAppnDlurLuEntry .1.3.6.1.4.1.18.3.5.14.7.1 |
wfAppnDlurLuEntryAn entry in wfAppnDlurLuTable. WfAppnDlurLuEntry .1.3.6.1.4.1.18.3.5.14.7.1.1 |
wfAppnDlurLuNameThis is the name of the LUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.1.1.1 |
wfAppnDlurLuPuNameThis is the name of the PU associated with the LUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.1.1.2 |
wfAppnDlurLuDlusNameThis is the name of the DLUS node supporting this LUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.1.1.3 |
wfAppnDlurLuNauAddressThis is the Network Addressable Unit address of this LUro INTEGER .1.3.6.1.4.1.18.3.5.14.7.1.1.4 |
wfAppnDlurLuPluNameThis is the name of the Partner LUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.1.1.5 |
wfAppnDlurLuRscvThis is the RSCV being used by this LU sessionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.7.1.1.6 |
wfAppnDlurLuRscvTextThis is the RSCV (in a human-readable format) for this DLUR connectionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.1.1.7 |
wfAppnDlurPuTableThis table contains an entry for each PU currently being serviced by DLUR SEQUENCE OF WfAppnDlurPuEntry .1.3.6.1.4.1.18.3.5.14.7.2 |
wfAppnDlurPuEntryAn entry in wfAppnDlurPuTable. WfAppnDlurPuEntry .1.3.6.1.4.1.18.3.5.14.7.2.1 |
wfAppnDlurPuNameThis is the name of the PUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.2.1.1 |
wfAppnDlurPuIdID of this PUro OCTET STRING .1.3.6.1.4.1.18.3.5.14.7.2.1.2 |
wfAppnDlurPuDefinedDlusNameThis is the name of the primary DLUS node defined this PUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.2.1.3 |
wfAppnDlurPuBackupDlusNameThis is the name of the backup DLUS node defined this PUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.2.1.4 |
wfAppnDlurPuActiveDlusNameThis is the name of the DLUS node currently supporting this PUro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.2.1.5 |
wfAppnDlurPuPcidThis is the PCID of the DLUR 'pipe' sessionro OCTET STRING .1.3.6.1.4.1.18.3.5.14.7.2.1.6 |
wfAppnDlurPuFqCpNameThis is the Fully-qualified CP name of the node assigning the
PCID for the DLUR 'pipe' sessionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.2.1.7 |
wfAppnDlurDlusTableThis table contains an entry for each DLUS known to this DLUR SEQUENCE OF WfAppnDlurDlusEntry .1.3.6.1.4.1.18.3.5.14.7.3 |
wfAppnDlurDlusEntryAn entry in wfAppnDlurDlusTable. WfAppnDlurDlusEntry .1.3.6.1.4.1.18.3.5.14.7.3.1 |
wfAppnDlurDlusNameThis is the fully-qualified name of the DLUS nodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.7.3.1.1 |
wfAppnDlurDlusIsDefaultThis indicates if the DLUS is the default DLUSro Enumeration .1.3.6.1.4.1.18.3.5.14.7.3.1.2 |
wfAppnDlurDlusIsBackupDefaultThis indicates if the DLUS is the default backup DLUSro Enumeration .1.3.6.1.4.1.18.3.5.14.7.3.1.3 |
wfAppnDlurDlusPipeStateThis indicates the state of the DLUR-DLUS pipero Enumeration .1.3.6.1.4.1.18.3.5.14.7.3.1.4 |
wfAppnDlurDlusActivePusThis indicates the number of PUs currently using this DLUR-DLUS pipero INTEGER .1.3.6.1.4.1.18.3.5.14.7.3.1.5 |
wfAppnDlurDlusSentReqactpusThis indicates the number of REQACTPUs sent over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.6 |
wfAppnDlurDlusRcvReqactpuRspsThis indicates the number of REQACTPU responses received over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.7 |
wfAppnDlurDlusRcvActpusThis indicates the number of ACTPUs received over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.8 |
wfAppnDlurDlusSentActpuRspsThis indicates the number of ACTPU responses sent over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.9 |
wfAppnDlurDlusSentReqdactpusThis indicates the number of REQDACTPUs sent over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.10 |
wfAppnDlurDlusRcvReqdactpuRspsThis indicates the number of REQDACTPU responses received over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.11 |
wfAppnDlurDlusRcvDactpusThis indicates the number of DACTPUs received over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.12 |
wfAppnDlurDlusSentDactpuRspsThis indicates the number of DACTPU responses sent over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.13 |
wfAppnDlurDlusRcvActlusThis indicates the number of ACTLUs received over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.14 |
wfAppnDlurDlusSentActluRspsThis indicates the number of ACTLU responses sent over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.15 |
wfAppnDlurDlusRcvDactlusThis indicates the number of DACTLUs received over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.16 |
wfAppnDlurDlusSentDactluRspsThis indicates the number of DACTLU responses sent over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.17 |
wfAppnDlurDlusRcvSscpPuMusThis indicates the number of SSCP-PU MUs received over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.18 |
wfAppnDlurDlusSentSscpPuMusThis indicates the number of SSCP-PU MUs sent over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.19 |
wfAppnDlurDlusRcvSscpLuMusThis indicates the number of SSCP-LU MUs received over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.20 |
wfAppnDlurDlusSentSscpLuMusThis indicates the number of SSCP-LU MUs sent over this DLUR-DLUS pipero Counter .1.3.6.1.4.1.18.3.5.14.7.3.1.21 |
wfAppnPathSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.14.8 |
wfAppnPathSwitchDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete a path switch.rw Enumeration .1.3.6.1.4.1.18.3.5.14.8.1 |
wfAppnPathSwitchDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this path switch.rw Enumeration .1.3.6.1.4.1.18.3.5.14.8.2 |
wfAppnPathSwitchRtpConnNameThis is the name of the RTP connection to path switchrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.14.8.3 |