Wellfleet-Voice-T1-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-Voice-T1-MIB.
23
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
wfVoIPT1ErrorThe SNMP trap that is generated when a T1 interface detects
an error. TRAP-TYPE .1.3.6.1.4.1.18.3.4.35.0.1 |
RFC1155-SMIVoice T1 line record SEQUENCE OF WfVoiceT1Entry .1.3.6.1.4.1.18.3.4.35.1 |
wfVoiceT1StatusTableTable containing Voice over IP T1 channel status records SEQUENCE OF WfVoiceT1StatusEntry .1.3.6.1.4.1.18.3.4.35.2 |
wfVoiceT1StatusEntryAn entry in the voice channel status table WfVoiceT1StatusEntry .1.3.6.1.4.1.18.3.4.35.2.1 |
wfVoiceT1BipolarViosNumber of xGCP control frames successfully rcvd.ro Counter .1.3.6.1.4.1.18.3.4.35.2.1.1 |
wfVoiceT1FrameBitErrsNumber of xGCP control frames successfully rcvd.ro Counter .1.3.6.1.4.1.18.3.4.35.2.1.2 |
wfVoiceT1LossOfFrameErrsNumber of xGCP control frames successfully rcvd.ro Counter .1.3.6.1.4.1.18.3.4.35.2.1.3 |
wfVoiceT1SuperFrameErrsNumber of xGCP control frames successfully rcvd.ro Counter .1.3.6.1.4.1.18.3.4.35.2.1.4 |
wfVoiceT1CRC6ErrsNumber of xGCP control frames successfully rcvd.ro Counter .1.3.6.1.4.1.18.3.4.35.2.1.5 |
wfVoiceT1RcvYelAlarmsNumber of xGCP control frames successfully rcvd.ro Counter .1.3.6.1.4.1.18.3.4.35.2.1.6 |
wfVoiceT1RcvCarrierLossNumber of xGCP control frames successfully rcvd.ro Counter .1.3.6.1.4.1.18.3.4.35.2.1.7 |
wfVoiceT1RcvRedAlarmsNumber of xGCP control frames successfully rcvd.ro Counter .1.3.6.1.4.1.18.3.4.35.2.1.8 |
wfVoiceT1EntryAn entry in the T1 table WfVoiceT1Entry .wfVoiceT1Table.1 |
wfVoiceT1Deletecreate/delete parameter, dflt = createdrw Enumeration .wfVoiceT1Table.1.1 |
wfVoiceT1Disableenable/disable parameter, dflt = enabledrw Enumeration .wfVoiceT1Table.1.2 |
wfVoiceT1Statephysical line status, updated by T1 line driverro Enumeration .wfVoiceT1Table.1.3 |
wfVoiceT1Slotinstance ID Slot, filled in by driver.
For the FBR this is a game slot.ro INTEGER .wfVoiceT1Table.1.4 |
wfVoiceT1Connectorinstance ID Connector, filled in by driver. For the
FBR, this attribute is an encoded value and is equal
to 'pci slot' * 1000 + 'module'*100 + 'connector'.ro INTEGER .wfVoiceT1Table.1.5 |
wfVoiceT1FrameTypeFrame Type - differentiates between two tarrifed framing formats
D4 and ESF.rw Enumeration .wfVoiceT1Table.1.6 |
wfVoiceT1TransmitWaveformSpecifies T1 transmit waveform settings. Legal values are:
long haul (LBO 0.0dB)
long haul (LBO 7.5dB)
long haul (LBO 15.0dB)
long haul (LBO 22.5dB)
short haul (0-110 ft)
short haul (110-220 ft)
short haul (220-330 ft)
short haul (330-440 ft)
short haul (440-550 ft)
short haul (550-660 ft)
Note that this attribute is not supported by all T1 interfaces.
For those interfaces that DO NOT support this attribute, the
wfDs1E1PortSignalLevel attribute is used instead.rw Enumeration .wfVoiceT1Table.1.7 |
wfVoiceT1LineCodeBinary 8 zeros suppression or Alternate Mark Inversionrw Enumeration .wfVoiceT1Table.1.8 |
wfVoiceT1ReceiveClockClock Mode - Specifiess the usage of the T1 receive clock.
Primary: Apply the receive clock of this T1 line as the system
clock source if it is available.
Secondary: When Primary clock source is not available, use
secondary as the system clock source.
Ignore: Never use this for system clock source.rw Enumeration .wfVoiceT1Table.1.9 |
wfVoiceT1TransmitClockClock Mode - Specifies the source of the T1 transmit clock.
Internal: Apply the system clock source as the transmit
clock source.
External: Loopback, use the receive clock of this T1 line
as the transmit clock source.rw Enumeration .wfVoiceT1Table.1.10 |