Wellfleet-TDMGROUP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
65
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
RFC1155-SMIThe table of TDM Circuits. SEQUENCE OF WfTdmCctInfoEntry .1.3.6.1.4.1.18.3.3.2.9.3.1 |
wfH110TimeslotTableThe table of h.110 timeslots, for all TDM Circuits. SEQUENCE OF WfH110TimeslotEntry .1.3.6.1.4.1.18.3.3.2.9.3.2 |
wfH110TimeslotEntryAn entry that describes a single h.110
transmit timeslot for a given TDM circuit. WfH110TimeslotEntry .1.3.6.1.4.1.18.3.3.2.9.3.2.1 |
wfH110TimeslotCctIdH.110 Circuit Id, filled in by driver.
This comes from the wfTdmCctInfoH110CctId
attribute in the wfTdmCctInfoEntry.ro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.2.1.1 |
wfH110TimeslotIndexTimeslot index for the given H.110 Connection,
filled in by driver, not to be confused with the
H.110 timeslot number within a given stream.ro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.2.1.2 |
wfH110TimeslotTxStreamNumberH.110 Transmit stream number, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.2.1.3 |
wfH110TimeslotTxTimeslotNumberH.110 Transmit timeslot number, within the
given Transmit stream number, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.2.1.4 |
wfH110TimeslotTxBitMaskH.110 Transmit timeslot 8-bit mask, filled in by driver.
For each bit,
0 = mask from connection,
1 = keep in connection.ro OCTET STRING .1.3.6.1.4.1.18.3.3.2.9.3.2.1.5 |
wfH110TimeslotRxStreamNumberH.110 Receive stream number, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.2.1.6 |
wfH110TimeslotRxTimeslotNumberH.110 Receive timeslot number, within the
given Receive stream number, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.2.1.7 |
wfH110TimeslotRxBitMaskH.110 Receive timeslot 8-bit mask, filled in by driver.
For each bit,
0 = mask from connection,
1 = keep in connection.ro OCTET STRING .1.3.6.1.4.1.18.3.3.2.9.3.2.1.8 |
wfH110ClockConfigTableH.110 clock configuration, configured by the user. SEQUENCE OF WfH110ClockConfigEntry .1.3.6.1.4.1.18.3.3.2.9.3.3 |
wfH110ClockConfigEntryOne entry per H.110 backplane, which defines
the h.110 clock sources. The priority of a
clock source is implicit in it's order in the
entry. wfH110ClockConfigClk1Connector is the primary,
wfH110ClockConfigClk2Connector is the secondary,
and so on. WfH110ClockConfigEntry .1.3.6.1.4.1.18.3.3.2.9.3.3.1 |
wfH110ClockConfigDeleteCreate/Delete parameter.rw Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.3.1.1 |
wfH110ClockConfigSlotThe GAME Instance Id Slot of the H.110 bus.
For the FBR, the Slot is always 1.ro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.2 |
wfH110ClockConfigT1E1ClksSpecifies the frequency (T1 or E1) of the H.110
clock sources.rw Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.3.1.3 |
wfH110ClockConfigClk1ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 1.
To select the local oscillator, use the number
0 (zero) as the connector.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.4 |
wfH110ClockConfigClk2ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 2.
To select the local oscillator, use the number
0 (zero) as the connector.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.5 |
wfH110ClockConfigClk3ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 3.
To select the local oscillator, use the number
0 (zero) as the connector.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.6 |
wfH110ClockConfigClk4ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 4.
To select the local oscillator, use the number
0 (zero) as the connector.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.7 |
wfH110ClockConfigClk5ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 5.
To select the local oscillator, use the number
0 (zero) as the connector.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.8 |
wfH110ClockConfigClk6ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 6.
To select the local oscillator, use the number
0 (zero) as the connector.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.9 |
wfH110ClockConfigClk7ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 7.
To select the local oscillator, use the number
0 (zero) as the connector.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.10 |
wfH110ClockConfigClk8ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 8.
To select the local oscillator, use the number
0 (zero) as the connector.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.11 |
wfH110ClockConfigClk9ConnectorSpecifies the GAME Instance Id Connector of
H.110 clock source 9.
This cannot be changed. It is always 0 (zero)
which specifies the local oscillator.ro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.3.1.12 |
wfH110ClockConfigCurrentClockSourceNumber of the currently active H.110 clock
source. For example, a value of 1 means that
wfH110ClockConfigClk1Connector is the active
clock source.ro Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.3.1.13 |
wfH110ClockConfigCurrentClockStateState of the current clock source
(good, failed, unknown, etc.).
Filled in by TDM Manager.ro Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.3.1.14 |
wfTdmVirtualTrunkingTableVirtual Trunking Control, configured by the user. SEQUENCE OF WfTdmVirtualTrunkingEntry .1.3.6.1.4.1.18.3.3.2.9.3.4 |
wfTdmVirtualTrunkingEntryOne entry per FBR, which defines the configuration
of the virtual trunking mechanism. Changing any
attributes in this entry will require the TDM
Manager to restart. WfTdmVirtualTrunkingEntry .1.3.6.1.4.1.18.3.3.2.9.3.4.1 |
wfTdmVirtualTrunkingDeleteCreate/Delete parameter.rw Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.4.1.1 |
wfTdmVirtualTrunkingSlotThe GAME Instance Id Slot of the H.110 bus.
For the FBR, the Slot is always 1.ro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.4.1.2 |
wfTdmVirtualTrunking64KChanSpecifies the number of channels to reserve for
the 64kb/s virtual trunk. The remainder of the
channels will be reserved for the 56kb/s trunk.
This MUST be an even number!
Note that if you assign N channels to the 64kb/s
trunk, you will have (64-N)/2 channels available
for the 56kb/s trunk.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.4.1.3 |
wfTdmVirtualTrunking56KChanThis read-only attribute specifies the number of
channels reserved for the 56kb/s virtual trunk.
This attribute is filled in by the TDM Manager.ro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.4.1.4 |
wfTdmIfTableTDM Interface line record SEQUENCE OF WfTdmIfEntry .1.3.6.1.4.1.18.3.3.2.9.3.5 |
wfTdmIfEntryAn entry in the TDM Interface table WfTdmIfEntry .1.3.6.1.4.1.18.3.3.2.9.3.5.1 |
wfTdmIfDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.5.1.1 |
wfTdmIfDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.5.1.2 |
wfTdmIfStateLine Driver state variable, Reflects the current state of the
Line Driver.ro Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.5.1.3 |
wfTdmIfSlotInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.5.1.4 |
wfTdmIfConnectorInstance ID Connector, filled in by driver. For the FBR
this attribute is an encoded value and is equal to
'pci slot *1000' + 'module'*100 + 'connector'.ro INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.5.1.5 |
wfTdmIfCctCCT number for this line instancerw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.5.1.6 |
wfTdmIfTimeslotSubrateSpecifies data rate within each and
every timeslot within a TDM circuit.
64k is for a full timeslot (8 bits).
56kmsb sets the first bit on the wire
to a 1, and data is carried on the next
7. 56klsb carries data on the first 7
bits, and sets the last bit to a 1.rw Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.5.1.7 |
wfTdmIfNumTslotsNumber of TDM circuit timeslots occupied by
this interface, defined for H.110 circuits only.
Since TDM circuits are full-duplex, setting
this attribute to N will allocate N tx
timeslots and N rx timeslots.rw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.5.1.8 |
wfTdmIfRxOctetsNumber of octets receivedro Counter .1.3.6.1.4.1.18.3.3.2.9.3.5.1.9 |
wfTdmIfTxOctetsNumber of octets transmittedro Counter .1.3.6.1.4.1.18.3.3.2.9.3.5.1.10 |
wfTdmIfCableTypeShows the type of Cable attached to the TDM Interface portro Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.5.1.11 |
wfTdmIfLastChangeThe value of SysUpTime at the time the interface entered
it's current operational state (UP state). SysUpTime is
defined as the time (in hundredths of a second) since the
network management portion of the system was last
re-initialized. Usually the time since boot.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.3.2.9.3.5.1.12 |
wfTdmIfEiaStatusThe state of the EIA signals at the router interface.
The signals are designated as bits in this entry. If the
signal is asserted, it is marked as a 1. If not asserted,
it is marked as a 0. The state of each signal will be updated
every second. Bits 0-15 are reserved for actual signal state.
Bits 16-31 are reserved for indicating toggling of the signal.
Toggling signals are indicated as a 1. Signals not toggling
are indicated with a 0.
The following signals are defined and monitored:
The bit definition as as follows with bit #0 being the LSB.
* signal status - bits 0-15 *
bit 0 = TXD transmit data
1 = RXD receive data
2 = RTS request to send
3 = CTS clear to send
4 = DSR data set ready
5 = DCD data carrier detect
6 = TXC transmit clock
7 = RXC receive clock
8 = DTR data terminal ready.
* signal toggle status bits 16-31 *
bit 16 = TXD transmit data
17 = RXD receive data
18 = RTS request to send
19 = CTS clear to send
20 = DSR data set ready
21 = DCD data carrier detect
22 = TXC transmit clock
23 = RXC receive clock
24 = DTR data terminal ready.ro Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.5.1.13 |
wfTdmIfEiaStatusResetReset The EIA status for the EIA signals in wfTdmIfEiaStatus.
This is particularly useful for clearing the toggle status.rw Enumeration .1.3.6.1.4.1.18.3.3.2.9.3.5.1.14 |
wfTdmIfLineNumberline number for this line instancerw INTEGER .1.3.6.1.4.1.18.3.3.2.9.3.5.1.15 |
wfTdmCctInfoEntryEntry format for TDM Circuit Info WfTdmCctInfoEntry .wfTdmCctInfoTable.1 |
wfTdmCctInfoDeleteCreate/Delete parameterrw Enumeration .wfTdmCctInfoTable.1.1 |
wfTdmCctInfoNumberTDM Circuit Number, filled in by driver.
This is the wfCircuitNumber index from
wfCircuitNameEntry.ro INTEGER .wfTdmCctInfoTable.1.2 |
wfTdmCctInfoBusTDM Circuit Bus Type (H.110 or other TDM bus type).
This allows future support of other TDM buses.rw Enumeration .wfTdmCctInfoTable.1.3 |
wfTdmCctInfoResTypeTDM resource utilization by this circuit.rw Enumeration .wfTdmCctInfoTable.1.4 |
wfTdmCctInfoH110CctIdH110 Circuit ID, filled in by driver.
This index is used by software to
track circuits on the H.110 backplane.ro INTEGER .wfTdmCctInfoTable.1.5 |
wfTdmCctInfoH110CctStateTDM Circuit state, filled in by driver,
defined for H.110 circuits only.ro Enumeration .wfTdmCctInfoTable.1.6 |
wfTdmCctInfoH110NumTslotsNumber of timeslots occupied by this H.110
TDM circuit, defined for H.110 circuits only.
Since TDM circuits are full-duplex, setting
this attribute to N will allocate N tx
timeslots and N rx timeslots.rw INTEGER .wfTdmCctInfoTable.1.7 |
wfTdmCctInfoH110TslotSubrateSpecifies data rate within each and
every timeslot within this TDM circuit.
64k is for a full timeslot (8 bits).
56kmsb sets the first bit on the wire
to a 1, and data is carried on the next
7. 56klsb carries data on the first 7
bits, and sets the last bit to a 1.rw Enumeration .wfTdmCctInfoTable.1.8 |
wfTdmCctInfoH110Endpt1SlotThe GAME Instance Id Slot of the first
endpoint of this H.110 TDM Circuit.
For the FBR, the Slot is always 1.rw INTEGER .wfTdmCctInfoTable.1.9 |
wfTdmCctInfoH110Endpt1ConnectorConnector number of the first endpoint of
this H.110 TDM circuit. This follows the
FBR convention of (PCI slot) * 1000 +
(module number) * 100 + port.rw INTEGER .wfTdmCctInfoTable.1.10 |
wfTdmCctInfoH110Endpt2SlotThe GAME Instance Id Slot of the second
endpoint of this switchedH110 H.110 TDM
Circuit. This attribute is required for
switchedH110 TDM circuits ONLY.
For the FBR, the Slot is always 1.rw INTEGER .wfTdmCctInfoTable.1.11 |
wfTdmCctInfoH110Endpt2ConnectorConnector number of the second endpoint of
this switchedH110 TDM circuit. This follows
the FBR convention of (PCI slot) * 1000 +
(module number) * 100 + port. This attribute
is required for switchedH110 TDM circuits ONLY.rw INTEGER .wfTdmCctInfoTable.1.12 |
wfTdmCctInfoUnderrunsNumber of TDM Circuit underrunsro Counter .wfTdmCctInfoTable.1.13 |
wfTdmCctInfoOverrunsNumber of TDM Circuit overrunsro Counter .wfTdmCctInfoTable.1.14 |