Wellfleet-SWSMDS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
158
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
158 total| Object Name |
|---|
RFC1155-SMIThe Wellfleet SMDS Switch Circuit (SNI,
subscriber) Record. This record holds
information on a per circuit (SSI, SNI,
subscriber) basis. SEQUENCE OF WfSmdsSwSubEntry .1.3.6.1.4.1.18.3.5.9.7.1 |
wfSmdsSwEndpTableThe Parameters for the Endpoint table. An
Endpoint is defined as an IP address, SMDS E.164
address pair. Endpoint ranges should never overlap. SEQUENCE OF WfSmdsSwEndpEntry .1.3.6.1.4.1.18.3.5.9.7.2 |
wfSmdsSwEndpEntryThe parameters for a particular Endpoint. WfSmdsSwEndpEntry .1.3.6.1.4.1.18.3.5.9.7.2.1 |
wfSmdsSwEndpDeleteIndication to delete this endpoint entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.2.1.1 |
wfSmdsSwEndpE164AddrHighThe High end of the E.164 address range for
this endpoint information.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.2.1.2 |
wfSmdsSwEndpE164AddrDeltaThe difference between wfSmdsSwEndpE164AddrHigh
to the beginning of the endpoint information.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.2.1.3 |
wfSmdsSwEndpInterfaceIndexThis number indicates which SNI
the endpoint information refers to.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.2.1.4 |
wfSmdsSwInterfaceTableThis is the Interface Table.
This table also holds the Maximum Information Rate
(MIR) information. SEQUENCE OF WfSmdsSwInterfaceEntry .1.3.6.1.4.1.18.3.5.9.7.3 |
wfSmdsSwInterfaceEntryThis table defines the IP addresses and what
interfaces they are associated with. WfSmdsSwInterfaceEntry .1.3.6.1.4.1.18.3.5.9.7.3.1 |
wfSmdsSwInterfaceDeleteIndication to delete this interface entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.3.1.1 |
wfSmdsSwInterfaceTypeThis number determines whether the interface
information refers to an SNI, SSI, or ICI.ro Enumeration .1.3.6.1.4.1.18.3.5.9.7.3.1.2 |
wfSmdsSwInterfaceIndexThis number indicates which SNI, SSI, or
ICI the interface information refers to.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.3.1.3 |
wfSmdsSwInterfaceIpAddrIP Address associated with the interface.rw IpAddress .1.3.6.1.4.1.18.3.5.9.7.3.1.4 |
wfSmdsSwInterfaceMIRThis number represents the MIR in octets per second.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.3.1.5 |
wfSmdsSwInterfaceCurrentRateThis number indicates the current rate of traffic flow
to the interface. The software updates this counter.
When this attribute exceeds wfSmdsSwInterfaceMIR
traffic to the interface is dropped. Periodically
the sofware resets this counter to zero.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.3.1.6 |
wfSmdsSwAssocScrnTableThis list identifies the associated SNI
addresses per individualand group address screen.
Different addresses on an SNI may be associated with
different individual and group address screens (one
individual address screen per associated address on
an SNI, and one group address screen per associated
address on an SNI ). SEQUENCE OF WfSmdsSwAssocScrnEntry .1.3.6.1.4.1.18.3.5.9.7.4 |
wfSmdsSwAssocScrnEntryAn SNI index, group and individual screening
list index, and the associated addresses for
the SNI for the address screens. WfSmdsSwAssocScrnEntry .1.3.6.1.4.1.18.3.5.9.7.4.1 |
wfSmdsSwAssocScrnDeleteIndication to delete this associated screen entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.4.1.1 |
wfSmdsSwAssocScrnSniIndexThe value of this object identifies the SIP Port
interface for which this entry contains management
information. The value of this object for a
particular interface has the same value as the
ifIndex, defined in RFC1213, for the same
interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.4.1.2 |
wfSmdsSwAssocScrnAddrIndThe value of this object identifies one of the
SMDS addresses for the SNI, identified by the
wfSmdsSwAssocScrnSniIndex that belongs to this
individual (or group) address screen
(wfSmdsSwAssocScrnAddrInd). This list will
contain both individual and group addresses,
because this list is used for both Destination
Address Screening and Source Address Screening; the
destination address in the L3_PDU that is
undergoing Source Address Screening may be either a
group or individual address that is assigned to
that SNI. One screen will have a maximum of 64
associated addresses; up to a maximum of 16
individual addresses identifying an SNI and up to a
maximum of 48 group addresses identifying an SNI.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.4.1.3 |
wfSmdsSwAssocScrnIndivIndexThe value of this object identifies the individual
address screening list. There is at least one
individual address screen and at most s individual
address screens per SNI. The initial value of s is
defined to be 4. In the future more screening
lists per SNI may be allowed. The values of this
object correspond to the values of wfSmdsSwIAScrnIndex
in the wfSmdsSwIAScrnTable.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.4.1.4 |
wfSmdsSwAssocScrnGrpIndexThe value of this object identifies the group
address screening list. There is at least one
group address screen and at most s group address
screens per SNI. The initial value of s is defined
to be 4. In the future more screening lists per
SNI may be allowed. The values of this object
correspond to the values of wfSmdsSwGAScrnIndex in the
wfSmdsSwGAScrnTable. This field applies only to
individual addresses on the SNI because it applies
only to destination address screening of group addresses.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.4.1.5 |
wfSmdsSwIAScrnTableThis list identifies the individual addresses
that will be screened per individual address screen
table. The are up to s (s is equal to 4) individual
address screens per SNI and at least one individual
address screen per SNI. The Individual Address
Screens and the Group Address Screens together
consist of up to n addresses. The initial value of
n is defined as 128. In the future a value of n up
to 2048 may be supported. The Individual Address
Screen is used to perform Destination Address
Screening for individually addressed data units and
Source Address Screening for all data units. The
Group Address Screen is used to perform Destination
Address Screening for group addressed data units. SEQUENCE OF WfSmdsSwIAScrnEntry .1.3.6.1.4.1.18.3.5.9.7.5 |
wfSmdsSwIAScrnEntryAn SNI index, a screening list index, the
individual addresses to be screened for the
individual address screen, and whether the screened
address is valid or invalid. WfSmdsSwIAScrnEntry .1.3.6.1.4.1.18.3.5.9.7.5.1 |
wfSmdsSwIAScrnDeleteIndication to delete this IA screen entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.5.1.1 |
wfSmdsSwIAScrnSniIndexThe value of this object identifies the SIP Port
interface for which this entry contains management
information. The value of this object for a
particular interface has the same value as the
ifIndex, defined in RFC1213, for the same
interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.5.1.2 |
wfSmdsSwIAScrnIndexThe value of this object identifies the individual
address screening list. There are at least one
individual address screen and at most s individual
address screens per SNI. The initial value of s is
defined to be 4. In the future more screening
lists per SNI may be allowed. The values of this
object correspond to the values of wfSmdsSwScrnIndex in
the wfSmdsSwScrnTable.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.5.1.3 |
wfSmdsSwIAScrnAddrThe value of this object identifies one of the
individual addresses to be screened for source and
destination address screening for the SNI
identified by the wfSmdsSwIAScrnSniIndex and for the
particular individual address screen
(wfSmdsSwIAScrnIndex).ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.5.1.4 |
wfSmdsSwGAScrnTableThis list identifies the group addresses that
will be screened per group address screen table.
The are up to s (s is equal to 4) group address
screens per SNI and at least one group address
screen per SNI. The Individual Address Screen and
the Group Address Screen together consist of up to n
addresses. The initial value of n is defined as
128. In the future a value of n up to 2048 may be
supported. The Individual Address Screen is used to
perform Destination Address Screening for
individually addressed data units and Source Address
Screening for all data units. The Group Address
Screen is used to perform Destination Address
Screening for group addressed data units. SEQUENCE OF WfSmdsSwGAScrnEntry .1.3.6.1.4.1.18.3.5.9.7.6 |
wfSmdsSwGAScrnEntryAn SNI index, a screening list index, the group
addresses to be screened for the group address
screen, and whether the screened address is valid
or invalid. WfSmdsSwGAScrnEntry .1.3.6.1.4.1.18.3.5.9.7.6.1 |
wfSmdsSwGAScrnDeleteIndication to delete this GA screen entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.6.1.1 |
wfSmdsSwGAScrnSniIndexThe value of this object identifies the SIP Port
interface for which this entry contains management
information. The value of this object for a
particular interface has the same value as the
ifIndex, defined in RFC1213, for the same
interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.6.1.2 |
wfSmdsSwGAScrnIndexThe value of this object identifies the group
address screening list. There is at least one
group address screen and at most s group address
screens per SNI. The initial value of s is defined
to be 4. In the future more screening lists per
SNI may be allowed. The values of this object
correspond to the values of wfSmdsSwScrnIndex in the
wfSmdsSwSmdsScrnTable.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.6.1.3 |
wfSmdsSwGAScrnAddrThe value of this object identifies one of the
group addresses to be screened for destination
address screening for the SNI identified by the
wfSmdsSwGAScrnSniIndex and for the particular group
address screen (wfSmdsSwGAScrnIndex).ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.6.1.4 |
wfSmdsSwGATableA table of all group addresses in the network and
the associated individual addresses identified by
each group address. A group address identifies up
to m individual addresses. An SMDS SS supports up
to n group addresses. A group address can be
identified by up to p individual addresses. A
particular SNI is identified by up to 48 group
addresses. The initial values of m, n, and p are
defined as 128, 1024, and 32, respectively. In the
future values of m and n of 2048 and 8192,
respectively, may be supported. SEQUENCE OF WfSmdsSwGAEntry .1.3.6.1.4.1.18.3.5.9.7.7 |
wfSmdsSwGAEntryA Group Address and an address in that group and
whether that association is valid or invalid. WfSmdsSwGAEntry .1.3.6.1.4.1.18.3.5.9.7.7.1 |
wfSmdsSwGADeleteIndication to delete this group address entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.7.1.1 |
wfSmdsSwGASSIThe SSI associated with this Group Address.
An SSI of 0 is used to indicate that all interfaces
can use the group address. An SSI other than 0
indicates that only the SSI, or an SNI associated
with the SSI should use the group.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.7.1.2 |
wfSmdsSwGAGroupAddressA Group Address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.7.1.3 |
wfSmdsSwGAGroupMemberAn individual SMDS address that belongs to this
Group Address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.7.1.4 |
wfSmdsSwCurUsageTableThis table contains the Current Usage Data.
This is the interface between Billing and Switching.
The Switch gates create these records. The Billing gates
collect them to create billing data. SEQUENCE OF WfSmdsSwCurUsageEntry .1.3.6.1.4.1.18.3.5.9.7.8 |
wfSmdsSwCurUsageEntryThe usage data for the current usage period
indexed by destination,source address. WfSmdsSwCurUsageEntry .1.3.6.1.4.1.18.3.5.9.7.8.1 |
wfSmdsSwCurUsageDeleteIndication to delete this current usage entry.rwobsolete Enumeration .1.3.6.1.4.1.18.3.5.9.7.8.1.1 |
wfSmdsSwCurUsageSniThe SNI number of the interface generating the
usage informationro INTEGER .1.3.6.1.4.1.18.3.5.9.7.8.1.2 |
wfSmdsSwCurUsageDestAddrThe destination address of a SMDS group or
individual E.164 address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.8.1.3 |
wfSmdsSwCurUsageSrcAddrThe source address of a SMDS individual
E.164 address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.8.1.4 |
wfSmdsSwCurUsageGrpIndAddrWhen the destination address of an L3_PDU is
a group address, this attribute is set to one of
the E.164 individual addresses that is in the
group address and on the destination SNI.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.8.1.5 |
wfSmdsSwCurUsageNumL3PduThis number represents the number of billable
L3_PDUs counted by the circuit during the most recent
collection interval.ro Counter .1.3.6.1.4.1.18.3.5.9.7.8.1.6 |
wfSmdsSwCurUsageNumOctetThis number represents the number of billable
octets counted by the circuit during the most recent
collection interval.ro Counter .1.3.6.1.4.1.18.3.5.9.7.8.1.7 |
wfSmdsSwCurUsageToBeDeletedIndication to billing to delete
this current usage entry.ro Enumeration .1.3.6.1.4.1.18.3.5.9.7.8.1.8 |
wfSmdsSwUsage OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.7.9 |
wfSmdsSwUsageEnableEnable/Disable SMDS_SW billing.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.9.1 |
wfSmdsSwUsageVolumeIndicates the file system volume number to which the
billing usage data files will be written. The volume
number corresponds to the slot number on which the
volume resides.
Note: Value 0 has the special meaning that no
'Store' and 'Flush' operations will take
place. This translates to no Billing data
will be written to the local file system.
'Update' operations will still be performed on
each local slot. Full Billing statistics
will still be available in the wfSmdsSwUsageTable
MIB.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.2 |
wfSmdsSwUsageVolumeBackupIndicates the backup volume if wfSmdsSwUsageVolume
becomes inoperative.
Note: This feature is not implemented in this release.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.3 |
wfSmdsSwUsageDirectoryThe name of the directory where the billing usage data
files are stored.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.7.9.4 |
wfSmdsSwUsageFilePrefixThe base name of billing usage data files.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.7.9.5 |
wfSmdsSwUsageTimerIntervalThis number determines the timer interval (number
of seconds) unit for the Billing process to perform
its various timer driven tasks. i.e. updating billing
usage data, writing billing usage data to file system
and file system management activities.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.6 |
wfSmdsSwUsageUpdateIntervalThis number specifies the interval (number of minutes)
for the Billing process to collect and update billing
usage data in the wfSmdsSwUsage MIB.
Note: When converted to seconds, this must be a multiple
of wfSmdsSwUsageTimerInterval.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.7 |
wfSmdsSwUsageStoreIntervalThis number specifies the interval (number of minutes)
for the Billing process to write billing usage data on
to the file system from the wfSmdsSwUsage MIB.
Note: When converted to seconds, this must be a multiple
of wfSmdsSwUsageTimerInterval.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.8 |
wfSmdsSwUsageFlushIntervalThis number specifies the interval (number of minutes)
for the Billing process to write billing usage data on
to the file system from the wfSmdsSwUsage MIB followed
by zeroing the wfSmdsSwUsage MIB.
Note: When converted to seconds, this must be a multiple of
wfSmdsSwUsageTimerInterval.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.9 |
wfSmdsSwUsageCleanupIntervalThis is the interval (number of minutes) for the Billing
process to check and delete old billing usage data files.
Note: When converted to seconds, this must be a multilple
of wfSmdsSwUsageTimerInterval.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.10 |
wfSmdsSwUsageLocalTimeZoneIndicates local time zone of the switchro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.11 |
wfSmdsSwUsageUpdateTimeStampTime stamp of last wfSmdsSwUsageUpdateInterval timer
expiration or the starting time of the current
wfSmdsSwUsageUpdateInterval. This value is number
of seconds since midnight Jan 1, 1976 (GMT).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.7.9.12 |
wfSmdsSwUsageStoreTimeStampTime stamp of last wfSmdsSwUsageStoreInterval
timer expiration or the starting time of the current
wfSmdsSwUsageStoreInterval. This value is number
of seconds since midnight Jan. 1, 1976 (GMT).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.7.9.13 |
wfSmdsSwUsageFlushTimeStampTime stamp of last wfSmdsSwUsageFlushInterval
timer expiration or the starting time of the current
wfSmdsSwUsageFlushInterval. This value is
number of seconds since midnight Jan. 1, 1976 (GMT).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.7.9.14 |
wfSmdsSwUsageCleanupTimeStampTime stamp of last wfSmdsSwUsageCleanupInterval
timer expiration or the starting time of the current
wfSmdsSwUsageCleanupInterval. This value is number
of seconds since midnight Jan. 1, 1976 (GMT).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.7.9.15 |
wfSmdsSwUsageUpdateDataSetting this attribute to a non-zero value will cause
an immediate updating of the billing usage data.
Once activated, this attribute should be reset to zero
to allow subsequent activations.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.16 |
wfSmdsSwUsageStoreDataSetting this attribute to a non-zero value will cause
an immediate updating and writing of the billing
usage data. Once activated, this attribute should
be reset to zero to allow subsequent activations.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.17 |
wfSmdsSwUsageFlushDataSetting this attribute to a non-zero value will cause
an immediate updating and writing of the billing usage
data and followed by zeroing the wfSmdsSwBillingUsage
MIB. Once activated, this attribute should be reset
to zero to allow subsequent activations.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.18 |
wfSmdsSwUsageFileCleanupSetting this attribute to a non-zero value will cause
an immediate checking and deleting old billing usage
data files. Once activated, this attribute should
be reset to zero to allow subsequent activations.rw INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.19 |
wfSmdsSwUsageStatecurrent state of SMDS_SW billing.ro Enumeration .1.3.6.1.4.1.18.3.5.9.7.9.20 |
wfSmdsSwUsageCurVolumecurrent file system volume number used. This
number is the same as wfSmdsSwUsageVolume except
when the user sets wfSmdsSwUsageVolume to an
invalid number.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.21 |
wfSmdsSwUsageCurVolumeBackupcurent backup file system volume number used. This
number is the same as wfSmdsSwUsageVolumeBackUp except
when the user sets wfSmdsSwUsageVolume to an
invalid number.
Note: This feature is not implemented in this release.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.22 |
wfSmdsSwUsageCurDirectorycurrent directory name used. This number is the
same as wfSmdsSwUsageDirectory except when the user
sets wfSmdsSwUsageDirectory to an invalid name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.7.9.23 |
wfSmdsSwUsageCurFilePrefixcurrent base file name used. This number is the
same as wfSmdsSwUsageFilePrefix except when the user
sets wfSmdsSwUsageFilePrefix to an invalid name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.7.9.24 |
wfSmdsSwUsageCurTimerIntervalcurrent timer interval number used. This number is
the same as wfSmdsSwUsageTimerInterval except when the
user sets wfSmdsSwUsageTimerInterval to an invalid value.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.25 |
wfSmdsSwUsageCurUpdateIntervalcurrent update interval number used. This number is
the same as wfSmdsSwUsageUpdateInterval except when the
user sets wfSmdsSwUsageUpdateInterval to an invalid value.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.26 |
wfSmdsSwUsageCurStoreIntervalcurrent store timer interval number used. This
number is the same as wfSmdsSwUsageStoreInterval
except when the user sets wfSmdsSwUsageStoreInterval
to an invalid value.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.27 |
wfSmdsSwUsageCurFlushIntervalcurrent flush timer interval number used. This
number is the same as wfSmdsSwUsageFlushInterval
except when the user sets wfSmdsSwUsageFlushInterval
to an invalid value.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.28 |
wfSmdsSwUsageCurCleanupIntervalcurrent file cleanup timer interval number used. This
number is the same as wfSmdsSwUsageCleanupInterval
except when the user sets wfSmdsSwUsageCleanupInterval
to an invalid value.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.29 |
wfSmdsSwUsageDebugEnable/Disable printing of debug edl (trap)
messages.
NOTE: Do not enable this attribute in operational enviornment
as it will likely flood the logging facility. This
attribute is reserved for specialized debugging in a
controlled lab enviornment.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.9.30 |
wfSmdsSwUsageCurDebugcurrent debug value used. This value is the
same as wfSmdsSwUsageDebug except when the user
sets wfSmdsSwUsageDeubg to an invalid value.ro Enumeration .1.3.6.1.4.1.18.3.5.9.7.9.31 |
wfSmdsSwUsageSwitchIdswitch id used in the billing usage data file.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.32 |
wfSmdsSwUsageNumEntriesnumber of entries in wfSmdsSwUsageTablero INTEGER .1.3.6.1.4.1.18.3.5.9.7.9.33 |
wfSmdsSwUsageTableThe Billing Usage Table. SEQUENCE OF WfSmdsSwUsageEntry .1.3.6.1.4.1.18.3.5.9.7.10 |
wfSmdsSwUsageEntryThe parameters for Billing Usage. WfSmdsSwUsageEntry .1.3.6.1.4.1.18.3.5.9.7.10.1 |
wfSmdsSwUsageDeleteIndicates status of this entry. SMDS_SW_USAGE_CREATED
is the normal case. SMDS_SW_USAGE_DELETED means this
billing instance will be deleted at the end of
the next wfSmdsSwUsageFlush period after this
billing record is written out to the file system.ro Enumeration .1.3.6.1.4.1.18.3.5.9.7.10.1.1 |
wfSmdsSwUsageSniThe circuit number of the interface generating the
usage informationro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.2 |
wfSmdsSwUsageDestAddrInstance identifier; the destination address of an L3_PDU.
The SMDS Switch collects usage data based on the
destination/source address pair.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.10.1.3 |
wfSmdsSwUsageSrcAddrInstance identifier; the source address of an L3_PDU.
The SMDS Switch collects usage data based on the
destination/source address pair.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.10.1.4 |
wfSmdsSwUsageStartTimeStampHighTime stamp of the starting time (the high 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since
midnight Jan 1, 1976 (GMT).ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.5 |
wfSmdsSwUsageStartTimeStampLowTime stamp of the starting time (the low 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since
midnight Jan 1, 1976 (GMT).ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.6 |
wfSmdsSwUsageEndTimeStampHighTime stamp of the ending time (the high 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since
midnight Jan 1, 1976 (GMT).ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.7 |
wfSmdsSwUsageEndTimeStampLowTime stamp of the ending time (the low 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since
midnight Jan 1, 1976 (GMT).ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.8 |
wfSmdsSwUsageSentL3PduHighNumber (the high 32 bits) of L3_PDUs
sent to the CPE between
wfSmdsSwUsageStartTimeStamp and
wfSmdsSwUsageEndTimeStamp.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.9 |
wfSmdsSwUsageSentL3PduLowNumber (the low 32 bits) of L3_PDUs
sent to the CPE between
wfSmdsSwUsageStartTimeStamp and
wfSmdsSwUsageEndTimeStamp.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.10 |
wfSmdsSwUsageSentOctetHighNumber (the high 32 bits) of octets
sent to the CPE between
wfSmdsSwUsageStartTimeStamp and
wfSmdsSwUsageEndTimeStamp.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.11 |
wfSmdsSwUsageSentOctetLowNumber (the low 32 bits) of octets
sent to the CPE between
wfSmdsSwUsageStartTimeStamp and
wfSmdsSwUsageEndTimeStamp.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.12 |
wfSmdsSwUsageLastL3PduHighThe (high 32 bits) value of
wfSmdsSwCurUsageNumL3Pdu value at
wfSmdsSwUsageEndTimeStamp.
Note: Since wfSmdsSwCurUsageNumL3Pdu
is a 32-bit COUNTER, this is really a counter
keeping track of number of times
wfSmdsSwCurUsageNumL3Pdu has wrapped around.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.13 |
wfSmdsSwUsageLastL3PduLowThe (low 32 bits) value of
wfSmdsSwCurUsageNumL3Pdu value at
wfSmdsSwUsageEndTimeStamp.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.14 |
wfSmdsSwUsageLastOctetHighThe (high 32 bits) value of
wfSmdsSwCurUsageNumOctets value at
wfSmdsSwUsageEndTimeStamp.
Note: Since wfSmdsSwCurUsageNumOctets
is a 32-bit COUNTER, this is really a counter
keeping track of number of times
wfSmdsSwCurUsageNumOctets has wrapped around.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.15 |
wfSmdsSwUsageLastOctetLowThe (low 32 bits) value of
wfSmdsSwCurUsageNumOctets value at
wfSmdsSwUsageEndTimeStamp.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.10.1.16 |
wfSmdsSwUsageGrpIndAddrWhen the destination address of an L3_PDU is
a group address, this attribute is set to one of
the E.164 individual addresses that is in the
group address and on the destination SNI.ro OCTET STRING .1.3.6.1.4.1.18.3.5.9.7.10.1.17 |
wfSmdsSwSsiSniTableThe Parameters for the SSI/SNI Object.
This object associates SNI's with SSI's for
Bellcore TR-TSV-001239 compliance. SEQUENCE OF WfSmdsSwSsiSniEntry .1.3.6.1.4.1.18.3.5.9.7.11 |
wfSmdsSwSsiSniEntryThe parameters for a particular SSI/SNI. WfSmdsSwSsiSniEntry .1.3.6.1.4.1.18.3.5.9.7.11.1 |
wfSmdsSwSsiSniDeleteIndication to delete this SSI/SNI entry.rw Enumeration .1.3.6.1.4.1.18.3.5.9.7.11.1.1 |
wfSmdsSwSsiSniSSIAn SSI.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.11.1.2 |
wfSmdsSwSsiSniSNIAn SNI.ro INTEGER .1.3.6.1.4.1.18.3.5.9.7.11.1.3 |
wfSmdsSwSubEntryPer Wellfleet circuit SMDS Switch configuration
parameters and counters.
This table contains Subscriber-Network Interface (SNI)
parameters and state variables, one entry per SIP port. WfSmdsSwSubEntry .wfSmdsSwSubTable.1 |
wfSmdsSwSubDeletecreate/delete parameter, dflt = createdrw Enumeration .wfSmdsSwSubTable.1.1 |
wfSmdsSwSubDisableenable/disable parameter, dflt = enabledrw Enumeration .wfSmdsSwSubTable.1.2 |
wfSmdsSwSubStateSMDS Switch state variable, Up, Down Init, Not Presentro Enumeration .wfSmdsSwSubTable.1.3 |
wfSmdsSwSubCctcct number for this instancero INTEGER .wfSmdsSwSubTable.1.4 |
wfSmdsSwSubDisableHrtbtPolldetermine use of DXI heartbeat pollrw Enumeration .wfSmdsSwSubTable.1.5 |
wfSmdsSwSubHrtbtPollAddrdetermine if heartbeat poll messages
are sent as as CPE or network
(CSU/DSU) messages.rw Enumeration .wfSmdsSwSubTable.1.6 |
wfSmdsSwSubHrtbtPollIntervalheartbeat polling messages get sent every this many
seconds - we don't want the polling interval to be
less than or equal to the no-acknowledgment timer.rw INTEGER .wfSmdsSwSubTable.1.7 |
wfSmdsSwSubHrtbtPollDownCountif this many consecutive heartbeat polling messages
go unacknowledged, log an event declaring the line downrw INTEGER .wfSmdsSwSubTable.1.8 |
wfSmdsSwSubDisableNetMgmtdetermine use of LMI network managementrw Enumeration .wfSmdsSwSubTable.1.9 |
wfSmdsSwSubInterfaceTypedefines whether this interface is a SNI or
SSI.rw Enumeration .wfSmdsSwSubTable.1.10 |
wfSmdsSwSubInterfaceIndexThe index number for the SSI/SNI. Each SNI in the
network has a unique id. The value of this object
identifies the SIP port interface for which this
entry contains management information.rw INTEGER .wfSmdsSwSubTable.1.11 |
wfSmdsSwSubDisableL3PduChecksEnable/Disable L3_PDU verification.
Default is disabled.rw Enumeration .wfSmdsSwSubTable.1.12 |
wfSmdsSwSubDisableUsageGenerationenable/disable usage data generation.
Default is disabled.rw Enumeration .wfSmdsSwSubTable.1.13 |
wfSmdsSwSubDisableMIRenable/disable MIR enforcement, default is
disabled.rw Enumeration .wfSmdsSwSubTable.1.14 |
wfSmdsSwSubUnassignedSAsThe total number of SIP Level 3 PDUs discarded
by the SMDS Switch because the Source Address was
not assigned to the SNI.ro Counter .wfSmdsSwSubTable.1.15 |
wfSmdsSwSubSAScreenViolationsThe number of SIP L3_PDUs that violated the
address screen based on source address screening
for an SNI.ro Counter .wfSmdsSwSubTable.1.16 |
wfSmdsSwSubDAScreenViolationsThe total number of SIP Level 3 PDUs that
violated the Destination Address Screening using
either an Individual Address Screen or a
Group Address Screen for the SNI.ro Counter .wfSmdsSwSubTable.1.17 |
wfSmdsSwSubNumPDUExceededMIRThe total number of SIP L3_PDUs that exceeded
the MIR on this interface.ro Counter .wfSmdsSwSubTable.1.18 |
wfSmdsSwSubSipL3ReceivedIAsThe total number of individually addressed SIP Level 3
PDUs received by the SMDS Switch from the CPE.
The total includes only unerrored L3PDUs.ro Counter .wfSmdsSwSubTable.1.19 |
wfSmdsSwSubSipL3ReceivedGAsThe total number of group addressed SIP Level 3 PDUs
received by the SMDS Switch from the CPE.
The total includes only unerrored L3PDUs.ro Counter .wfSmdsSwSubTable.1.20 |
wfSmdsSwSubSipL3UnrecIAsThe number of SIP Level 3 PDUs received by the
SMDS Switch from the CPE that have an unknown,
valid, individual SMDS Destination Address.ro Counter .wfSmdsSwSubTable.1.21 |
wfSmdsSwSubSipL3UnrecGAsThe number of SIP Level 3 PDUs received by the
SMDS Switch from the CPE that have an unknown,
valid, group SMDS Destination Address.ro Counter .wfSmdsSwSubTable.1.22 |
wfSmdsSwSubSipL3SentIAsThe number of individually addressed SIP Level 3 PDUs
that have been sent by this SMDS Switch to the CPE.ro Counter .wfSmdsSwSubTable.1.23 |
wfSmdsSwSubSipL3SentGAsThe number of group addressed SIP L3PDUs that have been
sent by this SMDS Switch to the CPE.ro Counter .wfSmdsSwSubTable.1.24 |
wfSmdsSwSubSipL3ErrorsThe total number of SIP Level 3 PDUs received
by the SMDS Switch from the CPE that were
discovered to have protocol errors.ro Counter .wfSmdsSwSubTable.1.25 |
wfSmdsSwSubSipL3InvAddrTypesThe total number of SIP Level 3 PDUs received
by the SMDS Switch from the CPE that had a value
in the Source or Destination Address type subfield
other than group or individual. Or if the
Source Address type subfield value indicates
a group address.ro Counter .wfSmdsSwSubTable.1.26 |
wfSmdsSwSubSipL3VersionSupportA value which indicates the version(s) of SIP
that this SNI supports. The value is a sum.
This sum initially takes the value zero. For each
version, V, that this interface supports, 2 raised
to (V - 1) is added to the sum. For example, a
port supporting versions 1 and 2 would have a
value of (2^(1-1)+2^(2-1))=3. The
SipL3VersionSupport is effectively a bit mask with
Version 1 equal to the least significant bit (LSB).ro Enumeration .wfSmdsSwSubTable.1.27 |
wfSmdsSwSubSAScrnViolationOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded as a
result of a Source Address violation.ro OCTET STRING .wfSmdsSwSubTable.1.28 |
wfSmdsSwSubDAScrnViolationOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded as a
result of a Destination Address violation.ro OCTET STRING .wfSmdsSwSubTable.1.29 |
wfSmdsSwSubUnassignedSAOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded as a
result of a unassigned Source Address.ro OCTET STRING .wfSmdsSwSubTable.1.30 |
wfSmdsSwSubSAErrorOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of a Source Address Field Format error.ro OCTET STRING .wfSmdsSwSubTable.1.31 |
wfSmdsSwSubDAErrorOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of a Destination Address Field Format error.ro OCTET STRING .wfSmdsSwSubTable.1.32 |
wfSmdsSwSubInvalidBASizeOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid BASize field value.ro OCTET STRING .wfSmdsSwSubTable.1.33 |
wfSmdsSwSubInvalidHELenOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid Header Extension Length Field value.ro OCTET STRING .wfSmdsSwSubTable.1.34 |
wfSmdsSwSubInvalidHEVerOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid Header Extension Version element.ro OCTET STRING .wfSmdsSwSubTable.1.35 |
wfSmdsSwSubInvalidHECarOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid Header Extension Carrier element.ro OCTET STRING .wfSmdsSwSubTable.1.36 |
wfSmdsSwSubInvalidHEPadOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an invalid Header Extension Pad element.ro OCTET STRING .wfSmdsSwSubTable.1.37 |
wfSmdsSwSubBEtagOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of a Beginning-End Tag mismatch.ro OCTET STRING .wfSmdsSwSubTable.1.38 |
wfSmdsSwSubBAsizeNELenOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
the BAsize and Length fields are not equal.ro OCTET STRING .wfSmdsSwSubTable.1.39 |
wfSmdsSwSubIncorrectLenOccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
of an incorrect length.ro OCTET STRING .wfSmdsSwSubTable.1.40 |
wfSmdsSwSubExceededMIROccurA string containing the SMDS Source Address,
Destination Address, and Event time of the most
recent occurance of an L3_PDU discarded because
it exceeded the MIR.ro OCTET STRING .wfSmdsSwSubTable.1.41 |
wfSmdsSwSubInBandMgmtDisableIn-Band Management enable/disable parameter.
This attribute indicates whether the local
WSNI (only) is enabled to run IP in Host mode,
for in-band management purposes, in additional
to being a switch interface. The default is
disabledrw Enumeration .wfSmdsSwSubTable.1.42 |
wfSmdsSwSubInBandMgmtLocalAddrSpecial SMDS E.164 Individual address that
identifies this local circuit. This attribute
is only used when the wfSmdsSwSubInBandMgmtDisable
attribute is set to ENABLEDrw OCTET STRING .wfSmdsSwSubTable.1.43 |
wfSmdsSwSubInBandMgmtReceivedPDUsThe total number of individually addressed In-Band
Management PDUs received by the SMDS Switch from
the CPE. The total includes only unerrored PDUs.ro Counter .wfSmdsSwSubTable.1.44 |
wfSmdsSwSubInBandMgmtSentPDUsThe number of individually addressed In-Band Management
PDUs that have been sent by this SMDS Switch to the CPE.ro Counter .wfSmdsSwSubTable.1.45 |
wfSmdsSwSubInBandMgmtMaxLenErrorsThe number of In-Band Management PDUs that have
exceeded the MTU size configured for the linero Counter .wfSmdsSwSubTable.1.46 |
wfSmdsSwSubInBandMgmtEncapsErrorsThe number of In-Band Management PDUs that have
invalid encapsulation schemesro Counter .wfSmdsSwSubTable.1.47 |
wfSmdsSwSubGAPartialResolveThe number of times group addressed L3_PDU's
could not be resolved due to congestion.ro Counter .wfSmdsSwSubTable.1.48 |
wfSmdsSwSubDANotOnSniThe number of times a L3_PDU was discarded
at the egress because the destination
address was not assigned to the SNI.ro Counter .wfSmdsSwSubTable.1.49 |