Wellfleet-STA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-STA-MIB.
28
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
wfSta OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.3.2.6.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.3.2.6.1 |
wfStaDisableEnables or disables statistical thresholds and alarmsrw Enumeration .1.3.6.1.4.1.18.3.3.2.6.1.1 |
wfStaPollIntervalThe polling interval (in seconds) in which to examine objects
in the threshold table for threshold exceptions.rw INTEGER .1.3.6.1.4.1.18.3.3.2.6.1.2 |
wfStaThresholdTableA table containing threshold targets SEQUENCE OF WfStaThresholdEntry .1.3.6.1.4.1.18.3.3.2.6.2 |
wfStaThresholdEntryInformation about a particular threshold object WfStaThresholdEntry .1.3.6.1.4.1.18.3.3.2.6.2.1 |
wfStaThresholdDeleteThe row (object) deletion attribute for this thresholdrw Enumeration .1.3.6.1.4.1.18.3.3.2.6.2.1.1 |
wfStaThresholdDisableThe enable/disable attribute for this threshold. Setting
this attribute to disabled, causes the threshold to be ignored
in subsequent polling periods.rw Enumeration .1.3.6.1.4.1.18.3.3.2.6.2.1.2 |
wfStaThresholdStateThe state of this threshold. An invalid state means that the
object could not be retrieved from the mib. A held state
indicates that the maximum successive exceptions for this
threshold has been reached and that alarms will not be
generated until an exception occurrs at a new level or no
exception occurs for the specified number of hold down
intervals at which point it becomes valid again. An ignored
state, indicates that this threshold is disabled and is not
being polled. A valid state indicates that this threshold is
under examination each polling period and no errors have been
encountered evaluating this object for exceptions. A
suspended state indicates that the object was not an integer
type; user should manually delete the suspended object.ro Enumeration .1.3.6.1.4.1.18.3.3.2.6.2.1.3 |
wfStaThresholdObjectThe identifier of the mib object to examine for threshold
exceptions.ro OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.3.2.6.2.1.4 |
wfStaThresholdLowValueThe mark for low threshold exceptionsrw Gauge .1.3.6.1.4.1.18.3.3.2.6.2.1.5 |
wfStaThresholdLowEventLevelThe severity level of the event log message (alarm) to be
generated on low exceptionrw Enumeration .1.3.6.1.4.1.18.3.3.2.6.2.1.6 |
wfStaThresholdMediumValueThe mark for medium threshold exceptionsrw Gauge .1.3.6.1.4.1.18.3.3.2.6.2.1.7 |
wfStaThresholdMediumEventLevelThe severity level of the event log message (alarm) to be
generated on medium exceptionrw Enumeration .1.3.6.1.4.1.18.3.3.2.6.2.1.8 |
wfStaThresholdHighValueThe mark for high threshold exceptionsrw Gauge .1.3.6.1.4.1.18.3.3.2.6.2.1.9 |
wfStaThresholdHighEventLevelThe severity level of the event log message (alarm) to be
generated on high exceptionrw Enumeration .1.3.6.1.4.1.18.3.3.2.6.2.1.10 |
wfStaThresholdCurrentValueThe most recently computed threshold value for the polled
object.ro Gauge .1.3.6.1.4.1.18.3.3.2.6.2.1.11 |
wfStaThresholdUnitsThe units to be used in the determination of threshold
exceptions. Absolute means that when the value object reaches
one of the three thresholds, an exception is generated.
PerSecond means that when the value/second reaches one of the
three threshold values, an exception is generated.rw Enumeration .1.3.6.1.4.1.18.3.3.2.6.2.1.12 |
wfStaThresholdActionHow the threshold should be evaluated with respect to the
threshold marksrw Enumeration .1.3.6.1.4.1.18.3.3.2.6.2.1.13 |
wfStaThresholdMaxSuccessiveAlarmsThe maximum number of successive alarms that can be generated
for this object before it enters a HELD state. A successive
alarms is defined as two or more successive polling periods
where an alarm is generated at the same level.rw INTEGER .1.3.6.1.4.1.18.3.3.2.6.2.1.14 |
wfStaThresholdHoldDownIntervalsThe number of exception free polling intervals which an
object in a held state must pass before transitioning to a
valid state.rw INTEGER .1.3.6.1.4.1.18.3.3.2.6.2.1.15 |
wfStaThresholdLowExceptionsThe number of low threshold exceptions.ro Counter .1.3.6.1.4.1.18.3.3.2.6.2.1.16 |
wfStaThresholdLowAlarmsThe number of low threshold alarms.ro Counter .1.3.6.1.4.1.18.3.3.2.6.2.1.17 |
wfStaThresholdMediumExceptionsThe number of medium threshold exceptions.ro Counter .1.3.6.1.4.1.18.3.3.2.6.2.1.18 |
wfStaThresholdMediumAlarmsThe number of medium threshold alarms.ro Counter .1.3.6.1.4.1.18.3.3.2.6.2.1.19 |
wfStaThresholdHighExceptionsThe number of high threshold exceptions.ro Counter .1.3.6.1.4.1.18.3.3.2.6.2.1.20 |
wfStaThresholdHighAlarmsThe number of high threshold alarms.ro Counter .1.3.6.1.4.1.18.3.3.2.6.2.1.21 |
wfStaThresholdLabelThe threshold lable string configurable by user.
The string would be returned in the trap and will
show in the log as string wfSyncRxOctets.2.1 instead
of the ASN.1 form.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.3.2.6.2.1.22 |