Wellfleet-SPAN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-SPAN-MIB.
37
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
wfBrStp OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.2.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.1.2.1 |
wfBrStpBaseDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the Spanning
tree.rw Enumeration .1.3.6.1.4.1.18.3.5.1.2.1.1 |
wfBrStpBaseEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable the spanning
tree.rw Enumeration .1.3.6.1.4.1.18.3.5.1.2.1.2 |
wfBrStpBaseStateThe current state of the spanning tree.ro Enumeration .1.3.6.1.4.1.18.3.5.1.2.1.3 |
wfBrStpProtocolSpecificationThe version of the Spanning Tree protocol being
run.ro Enumeration .1.3.6.1.4.1.18.3.5.1.2.1.4 |
wfBrStpBridgeIDThe Spanning Tree Bridge ID assigned to this
bridge. It is a 8-octet string. The first two
octets make up the bridge priority, and the last
six are the MAC address of this bridge, which
is commonly the MAC address of the first port
on the bridge.rw OCTET STRING .1.3.6.1.4.1.18.3.5.1.2.1.5 |
wfBrStpTimeSinceTopologyChangeThe time (in hundredths of a second) since the last
topology change was detected by the bridge.ro Counter .1.3.6.1.4.1.18.3.5.1.2.1.6 |
wfBrStpTopChangesThe total number of topology changes detected by
this bridge since it was last reset or initializedro Counter .1.3.6.1.4.1.18.3.5.1.2.1.7 |
wfBrStpDesignatedRootThe bridge ID of the root of the spanning tree as
determined by the Spanning Tree Protocol as
executed by the bridge. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node. It is a 8-octet
string. The first two octets make up the priority,
and the last six are the MAC address of the designated
root bridge.ro OCTET STRING .1.3.6.1.4.1.18.3.5.1.2.1.8 |
wfBrStpRootCostThe cost of the path to the root as seen from this
bridge.ro INTEGER .1.3.6.1.4.1.18.3.5.1.2.1.9 |
wfBrStpRootPortThe port identifier of the port which offers the
lowest cost path from this bridge to the root bridge.ro INTEGER .1.3.6.1.4.1.18.3.5.1.2.1.10 |
wfBrStpMaxAgeThe maximum age of the Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in hundredths of a second.
This represents the value actually in use by the
bridge.ro INTEGER .1.3.6.1.4.1.18.3.5.1.2.1.11 |
wfBrStpHelloTimeThe amount of time between transmission of
configuration BPDUs by this bridge on any port,
when it is the root of the spanning tree or
trying to become so, in hundreths of a second.
This represents the value actually in use by the bridge.ro INTEGER .1.3.6.1.4.1.18.3.5.1.2.1.12 |
wfBrStpHoldTimeThe value that determines the interval length during
which no more than two configuration BPDUs shall be
transmitted by this bridge, in hundredths of a second.ro Enumeration .1.3.6.1.4.1.18.3.5.1.2.1.13 |
wfBrStpForwardDelayThe time, in hundredths of a second, that a port
on this bridge will stay in a transitional state
(e.g. LISTENING) before moving to the next state
(e.g. LEARNING). This value is also used to age
all dynamic entries in the Forwarding Database
when a topology changed has been detected and is
underway. This represents the value actually in
use by the bridge.ro INTEGER .1.3.6.1.4.1.18.3.5.1.2.1.14 |
wfBrStpBridgeMaxAgeThe value that all bridges use for MaxAge when
this bridge acting as the root.rw INTEGER .1.3.6.1.4.1.18.3.5.1.2.1.15 |
wfBrStpBridgeHelloTimeThe value that all bridges use for HelloTime when
this bridge acting as the root.rw INTEGER .1.3.6.1.4.1.18.3.5.1.2.1.16 |
wfBrStpBridgeForwardDelayThe value that all bridges use for ForwardDelay when
this bridge acting as the root.rw INTEGER .1.3.6.1.4.1.18.3.5.1.2.1.17 |
wfBrStpBaseTrueConvergeEnable/Disable parameter. Default is disabled.
Allow spanning tree convergence times to become
predictable and accurate to settings specified
in user configuration.rw Enumeration .1.3.6.1.4.1.18.3.5.1.2.1.18 |
wfBrStpInterfaceTableinst_id[1] = wfBrStpInterfaceCircuit SEQUENCE OF WfBrStpInterfaceEntry .1.3.6.1.4.1.18.3.5.1.2.2 |
wfBrStpInterfaceEntryAn entry in wfBrStpInterface. WfBrStpInterfaceEntry .1.3.6.1.4.1.18.3.5.1.2.2.1 |
wfBrStpInterfaceDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete an interface
for the Spanning Tree.rw Enumeration .1.3.6.1.4.1.18.3.5.1.2.2.1.1 |
wfBrStpInterfaceEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an interface
for the Spanning Tree.rw Enumeration .1.3.6.1.4.1.18.3.5.1.2.2.1.2 |
wfBrStpInterfaceCircuitThe circuit number on which this interface is defined.ro INTEGER .1.3.6.1.4.1.18.3.5.1.2.2.1.3 |
wfBrStpInterfacePriorityThe value of the priority field which is contained in
the first octet of the (2 octet long) port ID for this
circuit. The other octet of the port ID is given by
wfBrStpInterfaceCircuit.rw INTEGER .1.3.6.1.4.1.18.3.5.1.2.2.1.4 |
wfBrStpInterfaceStateThe current state of the port as defined by the
application of the Spanning Tree Protocol.ro Enumeration .1.3.6.1.4.1.18.3.5.1.2.2.1.5 |
wfBrStpInterfaceMultiCastAddrThe MAC address used as the destination for all
BPDU packets generated out this port.ro OCTET STRING .1.3.6.1.4.1.18.3.5.1.2.2.1.6 |
wfBrStpInterfacePathCostThe contribution of this port the the root
path cost of paths toward the spanning tree
root which include this port.rw INTEGER .1.3.6.1.4.1.18.3.5.1.2.2.1.7 |
wfBrStpInterfaceDesignatedRootThe unique Bridge Identifier of the Bridge recorded
as the Root in the Configuration BPDUs transmitted
by the Designated Bridge for the segment to which this
port is attached. Bridge IDs are made up of a
2-byte priority field, and a 6-byte MAC address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.1.2.2.1.8 |
wfBrStpInterfaceDesignatedCostThe path cost of the Designated Port of the
segment connected to this port. This value
is compared to the Root Path Cost field in
received bridge PDUs.ro INTEGER .1.3.6.1.4.1.18.3.5.1.2.2.1.9 |
wfBrStpInterfaceDesignatedBridgeThe Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment.ro OCTET STRING .1.3.6.1.4.1.18.3.5.1.2.2.1.10 |
wfBrStpInterfaceDesignatedPortThe Port Identifier of the port on the Designated
Bridge for this port's segment.ro INTEGER .1.3.6.1.4.1.18.3.5.1.2.2.1.11 |
wfBrStpInterfaceForwardTransitionsThe number of times this port has transitioned
from the Learning State to the Forwarding state.ro Counter .1.3.6.1.4.1.18.3.5.1.2.2.1.12 |
wfBrStpInterfacePktsXmitdThe number of BPDU packets transmitted out this portro Counter .1.3.6.1.4.1.18.3.5.1.2.2.1.13 |
wfBrStpInterfacePktsRcvdThe number of BPDU packets received on this portro Counter .1.3.6.1.4.1.18.3.5.1.2.2.1.14 |
wfBrStpInterfaceTranslationDisableEnable/Disable translation bridging parameter. Default is disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.1.2.2.1.15 |