Wellfleet-SMDS-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
20
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
20 total| Object Name |
|---|
RFC1155-SMIThe Wellfleet SMDS Circuit Record SEQUENCE OF WfSmdsCircuitEntry .1.3.6.1.4.1.18.3.5.9.3 |
wfSmdsCircuitEntryper Wellfleet circuit SMDS configuration parameters and
counters WfSmdsCircuitEntry .wfSmdsCircuitTable.1 |
wfSmdsCircuitDeletecreate/delete parameter, dflt = createdrw Enumeration .wfSmdsCircuitTable.1.1 |
wfSmdsCircuitDisableenable/disable parameter, dflt = enabledrw Enumeration .wfSmdsCircuitTable.1.2 |
wfSmdsCircuitStateSMDS state variable, Up, Down Init, Not Presentro Enumeration .wfSmdsCircuitTable.1.3 |
wfSmdsCircuitIDcct number for this instancero INTEGER .wfSmdsCircuitTable.1.4 |
wfSmdsCircuitIndivAddrSMDS E.164 Individual address for this Wellfleet
circuit - must be 8 octets longrw OCTET STRING .wfSmdsCircuitTable.1.5 |
wfSmdsCircuitGroupAddrSMDS E.164 Group address for this Wellfleet
circuit - must be 8 octets longrw OCTET STRING .wfSmdsCircuitTable.1.6 |
wfSmdsCircuitArpAddrSMDS E.164 ARP address for this Wellfleet
circuit - must be 8 octets longrw OCTET STRING .wfSmdsCircuitTable.1.7 |
wfSmdsCircuitDisableHrtbtPolldetermine use of DXI heartbeat pollrw Enumeration .wfSmdsCircuitTable.1.8 |
wfSmdsCircuitHrtbtPollIntervalheartbeat polling messages get sent every this many
seconds - we don't want the polling interval to be
less than or equal to the unacknowledgment timer, which
is 5 secondsrw INTEGER .wfSmdsCircuitTable.1.9 |
wfSmdsCircuitHrtbtPollDownCountif this many consecutive heartbeat polling messages
go unacknowledged, log an event declaring the line
downrw INTEGER .wfSmdsCircuitTable.1.10 |
wfSmdsCircuitDisableNetMgmtdetermine use of LMI network managementrw Enumeration .wfSmdsCircuitTable.1.11 |
wfSmdsCircuitSipL3ReceivedIndividualDAsThe total number of individually addressed SIP Level 3 PDUs
received from the remote system across the SNI. The total
includes only unerrored L3PDUs.ro Counter .wfSmdsCircuitTable.1.12 |
wfSmdsCircuitSipL3ReceivedGAsThe total number of group addressed SIP Level 3 PDUs
received from the remote system across the SNI. The
total includes only unerrored L3PDUs.ro Counter .wfSmdsCircuitTable.1.13 |
wfSmdsCircuitSipL3SentIndividualDAsThe number of individually addressed SIP Level 3 PDUs
that have been sent by this system across the SNI.ro Counter .wfSmdsCircuitTable.1.14 |
wfSmdsCircuitSipL3SentGAsThe number of group addressed SIP L3PDUs that have been
sent by this system across the SNI.ro Counter .wfSmdsCircuitTable.1.15 |
wfSmdsCircuitSipL3VersionSupportA value which indicates the version(s) of SIP
that this interface supports. The value is a sum.
This sum initially takes the value zero. For each
version, V, that this interface supports, 2 raised
to (V - 1) is added to the sum. For example, a
port supporting versions 1 and 2 would have a
value of (2^(1-1)+2^(2-1))=3. The
SipL3VersionSupport is effectively a bit mask with
Version 1 equal to the least significant bit (LSB).ro Enumeration .wfSmdsCircuitTable.1.16 |
wfSmdsCircuitDisableAddrVerifyThis object enables/disables verification checking
of destination addresses in received packets.rw Enumeration .wfSmdsCircuitTable.1.17 |
wfSmdsCircuitAddrVerifyDiscardsThis is the count of SMDS PDUs discarded due to
mismatched group or individual addressesro Counter .wfSmdsCircuitTable.1.18 |