Home/Catalog/Wellfleet-RSVP-MIB

Wellfleet-RSVP-MIB

Detailed view of the defined objects, syntax rules, and hierarchical paths.

243
Objects
Active
Status
3
Dependencies

Imported Objects

RFC-1212
RFC1155-SMI
Wellfleet-COMMON-MIB

Objects

243 total
Object Name
wfRsvpGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.18.3.5.16.1.1
IMPORTS
Unknown
.1.3.6.1.4.1.18.3.5.16.1.1
wfRsvp
OBJECT IDENTIFIER
.1.3.6.1.4.1.18.3.5.16.1.1.1
wfRsvpDeleteCreate/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete Rsvp.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.1.1
wfRsvpDisableEnable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable Rsvp.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.1.2
wfRsvpStateThe current state of Rsvp.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.1.3
wfRsvpSoloistSlotsSlot mask for which slot(s) RSVP Soloist is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN.rw
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.1.4
wfRsvpInfoLogFilterTurn RSVP log ON or OFF for RSVP informational and warning messages. The bit position is used to represent a RSVP module: RSVP_LOG_RIF_PROCESSING 0x0001 - RIF processing. RSVP_LOG_SOLO_PROCESSING 0x0002 - SOLO processing. RSVP_LOG_ROUTE_INTF_PROCESSING 0x0004 - ROUTE interface processing. RSVP_LOG_MERGE_PROCESSING 0x0008 - MERGE processing. RSVP_LOG_DB_PROCESSING 0x0010 - database access processing. RSVP_LOG_INTSERV_INTF_PROCESSING 0x0020 - INTSERV interface processing. RSVP_LOG_CRM_INTF_PROCESSING 0x0040 - CRM interface processing. RSVP_LOG_STATIC_RSVP 0x0080 - STATIC RSVP processing. RSVP_LOG_CONTROL_PROCESSING 0x0100 - CONTROL processing. RSVP_LOG_MAP_VEC_PROCESSING 0x0200 - MAP VECTOR processing. RSVP_LOG_PROXY_PROCESSING 0x0400 - RSVP MIB PROXY processing. RSVP_LOG_REFRESH_PROCESSING 0x0800 - Path/Resv Refresh processing.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.1.5
wfRsvpDebugLogFilterTurn RSVP log ON or OFF for RSVP debugging messages. The bit position is used to represent a RSVP module: RSVP_LOG_RIF_PROCESSING 0x0001 - RIF processing. RSVP_LOG_SOLO_PROCESSING 0x0002 - SOLO processing. RSVP_LOG_ROUTE_INTF_PROCESSING 0x0004 - ROUTE interface processing. RSVP_LOG_MERGE_PROCESSING 0x0008 - MERGE processing. RSVP_LOG_DB_PROCESSING 0x0010 - database access processing. RSVP_LOG_INTSERV_INTF_PROCESSING 0x0020 - INTSERV interface processing. RSVP_LOG_CRM_INTF_PROCESSING 0x0040 - CRM interface processing. RSVP_LOG_STATIC_RSVP 0x0080 - STATIC RSVP processing. RSVP_LOG_CONTROL_PROCESSING 0x0100 - CONTROL processing. RSVP_LOG_MAP_VEC_PROCESSING 0x0200 - MAP VECTOR processing. RSVP_LOG_PROXY_PROCESSING 0x0400 - RSVP MIB PROXY processing. RSVP_LOG_REFRESH_PROCESSING 0x0800 - Path/Resv Refresh processing.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.1.6
wfRsvpTraceLogFilterTurn RSVP log ON or OFF for RSVP trace messages. The bit position is used to represent a RSVP module: RSVP_LOG_RIF_PROCESSING 0x0001 - RIF processing. RSVP_LOG_SOLO_PROCESSING 0x0002 - SOLO processing. RSVP_LOG_ROUTE_INTF_PROCESSING 0x0004 - ROUTE interface processing. RSVP_LOG_MERGE_PROCESSING 0x0008 - MERGE processing. RSVP_LOG_DB_PROCESSING 0x0010 - database access processing. RSVP_LOG_INTSERV_INTF_PROCESSING 0x0020 - INTSERV interface processing. RSVP_LOG_CRM_INTF_PROCESSING 0x0040 - CRM interface processing. RSVP_LOG_STATIC_RSVP 0x0080 - STATIC RSVP processing. RSVP_LOG_CONTROL_PROCESSING 0x0100 - CONTROL processing. RSVP_LOG_MAP_VEC_PROCESSING 0x0200 - MAP VECTOR processing. RSVP_LOG_PROXY_PROCESSING 0x0400 - RSVP MIB PROXY processing. RSVP_LOG_REFRESH_PROCESSING 0x0800 - Path/Resv Refresh processing.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.1.7
wfRsvpTotalSendersThe total number of Sender (PATH) states in the router.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.1.8
wfRsvpTotalReservationsThe total number of Reservation (RESV) states in the router.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.1.9
wfRsvpTotalReservedThe total number of of successful reservations.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.1.10
wfRsvpCurrentSoloistSlotThe Current RSVP Soloist slot. Slots can be 1-14. Default is zero.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.1.11
wfRsvpSessionTableStatistics concerning the sessions seen by a given system.
SEQUENCE OF WfRsvpSessionEntry
.1.3.6.1.4.1.18.3.5.16.1.1.2
wfRsvpSessionEntryStatistics concerning a single RSVP session seen by a given system.
WfRsvpSessionEntry
.1.3.6.1.4.1.18.3.5.16.1.1.2.1
wfRsvpSessionDestAddrThe destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.2.1.1
wfRsvpSessionDestAddrLengthThe CIDR prefix length of the session address, which is 32 for IP4 host and multicast ad- dresses. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.2.1.2
wfRsvpSessionProtocolThe IP Protocol used by this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.2.1.3
wfRsvpSessionPortThe UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpSen- derProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.2.1.4
wfRsvpSessionSendersThe number of senders currently known to be part of this session.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.2.1.5
wfRsvpSessionReceiversThe number of reservations being requested of this system for this session.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.2.1.6
wfRsvpSessionRequestsThe number of reservation requests this system is sending upstream for this session.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.2.1.7
wfRsvpSenderTableInformation describing the state information displayed by senders in PATH messages.
SEQUENCE OF WfRsvpSenderEntry
.1.3.6.1.4.1.18.3.5.16.1.1.3
wfRsvpSenderEntryInformation describing the state information displayed by a single sender's PATH message.
WfRsvpSenderEntry
.1.3.6.1.4.1.18.3.5.16.1.1.3.1
wfRsvpSenderDestAddrThe destination IP address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.1
wfRsvpSenderAddrThe source address used by this sender in this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.2
wfRsvpSenderDestAddrLengthThe length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.3
wfRsvpSenderAddrLengthThe length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.4
wfRsvpSenderProtocolThe IP Protocol used by this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.5
wfRsvpSenderDestPortThe UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpSen- derProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.6
wfRsvpSenderPortThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by rsvpSenderPro- tocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.7
wfRsvpSenderHopAddrThe address used by the previous RSVP hop (which may be the original sender).ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.8
wfRsvpSenderHopLihThe Logical Interface Handle used by the pre- vious RSVP hop (which may be the original sender).ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.9
wfRsvpSenderInterfaceThe ifIndex value of the interface on which this PATH message was most recently received.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.10
wfRsvpSenderTSpecRateThe Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as rsvpSenderTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed rsvpSen- derTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.11
wfRsvpSenderTSpecPeakRateThe Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.12
wfRsvpSenderTSpecBurstThe size of the largest burst expected from the sender at a time. UNITS, bytesro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.13
wfRsvpSenderTSpecMinTUThe minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.ro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.14
wfRsvpSenderTSpecMaxTUThe maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.ro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.15
wfRsvpSenderIntervalThe interval between refresh messages as ad- vertised by the Previous Hop. UNITS millisecondsro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.16
wfRsvpSenderRSVPHopIf TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node be- lieves that the previous IP hop may not be an RSVP hop.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.17
wfRsvpSenderLastChangeThe time of the last change in this PATH mes- sage; This is either the first time it was re- ceived or the time of the most recent change in parameters.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.18
wfRsvpSenderPSBTimeoutThe remaining lifetime of this sender's PSB.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.19
wfRsvpSenderPolicyThe contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length.ro
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.20
wfRsvpSenderAdspecBreakThe global break bit general characterization parameter from the ADSPEC. If TRUE, at least one non-IS hop was detected in the path. If FALSE, no non-IS hops were detected.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.21
wfRsvpSenderAdspecHopCountThe hop count general characterization parame- ter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not presentro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.22
wfRsvpSenderAdspecPathBwThe path bandwidth estimate general character- ization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.23
wfRsvpSenderAdspecMinLatencyThe minimum path latency general characteriza- tion parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present UNITS, microsecondsro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.24
wfRsvpSenderAdspecMtuThe composed Maximum Transmission Unit general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present UNITS, bytesro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.25
wfRsvpSenderAdspecGSSvcIf TRUE, the ADSPEC contains a Guaranteed Ser- vice fragment. If FALSE or noValue, the ADSPEC does not contain a Guaranteed Service fragment.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.26
wfRsvpSenderAdspecGSBreakIf TRUE, the Guaranteed Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the guaranteed service. If FALSE, and rsvpSen- derAdspecGSSvc is TRUE, the 'break' bit is not set. If wfRsvpSenderAdspecGuaranteedSvc is FALSE, this returns FALSE or noSuchValue.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.27
wfRsvpSenderAdspecGSCtotIf wfRsvpSenderAdspecGSSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'C' parameter. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, bytesro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.28
wfRsvpSenderAdspecGSDtotIf wfRsvpSenderAdspecGSSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'D' parameter. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, microsecondsro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.29
wfRsvpSenderAdspecGSCsumIf wfRsvpSenderAdspecGSSvc is TRUE, this is the composed value for the guaranteed ser- vice 'C' parameter since the last reshaping point. A return of zero or noSuchValue indi- cates one of the following conditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, bytesro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.30
wfRsvpSenderAdspecGSDsumIf wfRsvpSenderAdspecGSSvc is TRUE, this is the composed value for the guaranteed ser- vice 'D' parameter since the last reshaping point. A return of zero or noSuchValue indi- cates one of the following conditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, microsecondsro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.31
wfRsvpSenderAdspecGSHopCountIf wfRsvpSenderAdspecGSSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.32
wfRsvpSenderAdspecGSPathBwIf wfRsvpSenderAdspecGSSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.33
wfRsvpSenderAdspecGSMinLatencyIf wfRsvpSenderAdspecGSSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuch- Value indicates one of the following condi- tions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, microsecondsro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.34
wfRsvpSenderAdspecGSMtuIf wfRsvpSenderAdspecGSSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac- terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, bytesro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.35
wfRsvpSenderAdspecCLSvcIf TRUE, the ADSPEC contains a Controlled Load Service fragment. If FALSE, the ADSPEC does not contain a Controlled Load Service frag- ment.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.36
wfRsvpSenderAdspecCLBreakIf TRUE, the Controlled Load Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the controlled load service. If FALSE, and wfRsvpSenderAdspecCLSvc is TRUE, the 'break' bit is not set. If wfRsvpSenderAdspecCLSvc is FALSE, this returns FALSE or noSuchValue.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.37
wfRsvpSenderAdspecCLHopCountIf wfRsvpSenderAdspecCLSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecCLSvc is FALSE, this returns zero or noSuchValue.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.38
wfRsvpSenderAdspecCLPathBwIf wfRsvpSenderAdspecCLSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecCLSvc is FALSE, this returns zero or noSuchValue. UNITS, bits per secondro
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.39
wfRsvpSenderAdspecCLMinLatencyIf wfRsvpSenderAdspecCLSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuch- Value indicates one of the following condi- tions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecCLSvc is FALSE, this returns zero or noSuchValue. UNITS, microsecondsro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.40
wfRsvpSenderAdspecCLMtuIf wfRsvpSenderAdspecCLSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac- terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If wfRsvpSenderAdspecCLSvc is FALSE, this returns zero or noSuchValue. UNITS, bytesro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.41
wfRsvpSenderStatus'valid' for all active PATH messages.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.3.1.42
wfRsvpResvTableInformation describing the state information displayed by receivers in RESV messages.
SEQUENCE OF WfRsvpResvEntry
.1.3.6.1.4.1.18.3.5.16.1.1.4
wfRsvpResvEntryInformation describing the state information displayed by a single receiver's RESV message concerning a single sender.
WfRsvpResvEntry
.1.3.6.1.4.1.18.3.5.16.1.1.4.1
wfRsvpResvDestAddrThe destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.1
wfRsvpResvSenderAddrThe source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the RowStatus object is 'valid'.ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.2
wfRsvpResvDestAddrLengthThe length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.3
wfRsvpResvSenderAddrLengthThe length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.4
wfRsvpResvProtocolThe IP Protocol used by this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.5
wfRsvpResvDestPortThe UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by wfRsvpResvProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.6
wfRsvpResvPortThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by wfRsvpResvProto- col is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.7
wfRsvpResvHopAddrThe address used by the next RSVP hop (which may be the ultimate receiver).ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.8
wfRsvpResvHopLihThe Logical Interface Handle received from the previous RSVP hop (which may be the ultimate receiver).ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.9
wfRsvpResvInterfaceThe ifIndex value of the interface on which this RESV message was most recently received.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.10
wfRsvpResvServiceThe QoS Service classification requested by the receiver.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.11
wfRsvpResvTSpecRateThe Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as wfRsvpResvTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed wfRsvpResvTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.12
wfRsvpResvTSpecPeakRateThe Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.13
wfRsvpResvTSpecBurstThe size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option. UNITS, bytesro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.14
wfRsvpResvTSpecMinTUThe minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.ro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.15
wfRsvpResvTSpecMaxTUThe maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.ro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.16
wfRsvpResvTSpecLevelIf the service is predictive or controlled- delay, this is the service level that is being requested. Otherwise, it is zero, or the agent may return noSuchValue.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.17
wfRsvpResvRSpecRateIf the requested service is Guaranteed, as specified by wfRsvpResvService, this is the clearing rate that is being requested. Other- wise, it is zero, or the agent may return noSuchValue. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.18
wfRsvpResvRSpecSlackIf the requested service is Guaranteed, as specified by wfRsvpResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue.UNITS, microsecondsro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.19
wfRsvpResvIntervalThe interval between refresh messages as ad- vertised by the Next Hop. UNITS millisecondsro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.20
wfRsvpResvScopeThe contents of the scope object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length. If the length is non-zero, this contains a series of IP4 or IP6 addresses.ro
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.21
wfRsvpResvSharedIf TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.22
wfRsvpResvExplicitIf TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.23
wfRsvpResvRSVPHopIf TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node be- lieves that the previous IP hop may not be an RSVP hop.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.24
wfRsvpResvLastChangeThe time of the last change in this reserva- tion request; This is either the first time it was received or the time of the most recent change in parameters.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.25
wfRsvpResvRSBTimeoutThe remaining lifetime of this reservation's RSB.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.26
wfRsvpResvPolicyThe contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length.ro
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.27
wfRsvpResvStatus'valid' for all active RESV messages.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.4.1.28
wfRsvpResvFwdTableInformation describing the state information displayed upstream in RESV messages.
SEQUENCE OF WfRsvpResvFwdEntry
.1.3.6.1.4.1.18.3.5.16.1.1.5
wfRsvpResvFwdEntryInformation describing the state information displayed upstream in an RESV message concern- ing a single sender.
WfRsvpResvFwdEntry
.1.3.6.1.4.1.18.3.5.16.1.1.5.1
wfRsvpResvFwdDestAddrThe destination address used by all senders in this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.1
wfRsvpResvFwdSenderAddrThe source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the RowStatus object is 'valid'.ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.2
wfRsvpResvFwdDestAddrLengthThe length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.3
wfRsvpResvFwdSenderAddrLengthThe length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.4
wfRsvpResvFwdProtocolThe IP Protocol used by this session. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.5
wfRsvpResvFwdDestPortThe UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by wfRsvpResvFwdProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.6
wfRsvpResvFwdPortThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by wfRsvpResvFwdProto- col is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'valid'.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.7
wfRsvpResvFwdHopAddrThe address used by the next RSVP hop (which may be the ultimate receiver).ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.8
wfRsvpResvFwdHopLihThe Logical Interface Handle received from the previous RSVP hop (which may be the ultimate receiver).ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.9
wfRsvpResvFwdInterfaceThe ifIndex value of the interface on which this RESV message was most recently received.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.10
wfRsvpResvFwdServiceThe QoS Service classification requested by the receiver.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.11
wfRsvpResvFwdTSpecRateThe Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as wfRsvpResvFwdTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed wfRsvpResvFwdTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.12
wfRsvpResvFwdTSpecPeakRateThe Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.13
wfRsvpResvFwdTSpecBurstThe size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option. UNITS, bytesro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.14
wfRsvpResvFwdTSpecMinTUThe minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.ro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.15
wfRsvpResvFwdTSpecMaxTUThe maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.ro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.16
wfRsvpResvFwdTSpecLevelIf the service is predictive or controlled- delay, this is the service level that is being requested. Otherwise, it is zero, or the agent may return noSuchValue.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.17
wfRsvpResvFwdRSpecRateIf the requested service is Guaranteed, as specified by wfRsvpResvFwdService, this is the clearing rate that is being requested. Other- wise, it is zero, or the agent may return noSuchValue. UNITS, bits per secondro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.18
wfRsvpResvFwdRSpecSlackIf the requested service is Guaranteed, as specified by wfRsvpResvFwdService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue.UNITS, microsecondsro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.19
wfRsvpResvFwdIntervalThe interval between refresh messages as ad- vertised by the Next Hop.ro
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.20
wfRsvpResvFwdScopeThe contents of the scope object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length. If the length is non-zero, this contains a series of IP4 or IP6 addresses.ro
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.21
wfRsvpResvFwdSharedIf TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.22
wfRsvpResvFwdExplicitIf TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.23
wfRsvpResvFwdRSVPHopIf TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node be- lieves that the previous IP hop may not be an RSVP hop.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.24
wfRsvpResvFwdLastChangeThe time of the last change in this reserva- tion request; This is either the first time it was received or the time of the most recent change in parameters.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.25
wfRsvpResvFwdPolicyThe contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length.ro
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.26
wfRsvpResvFwdStatus'valid' for all active RESV messages. This object may be used to install static RESV in- formation or delete RESV information.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.5.1.27
wfRsvpIfTableList of configured RSVP interface.
SEQUENCE OF WfRsvpIfEntry
.1.3.6.1.4.1.18.3.5.16.1.1.6
wfRsvpIfEntryA description of an RSVP interface
WfRsvpIfEntry
.1.3.6.1.4.1.18.3.5.16.1.1.6.1
wfRsvpIfDeleteIndicates whether this RSVP If record is to be deleted or createdrw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.1
wfRsvpIfEnableIndicates whether this RSVP intf record is to be enabled or disabledrw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.2
wfRsvpIfStateThe current state of the RSVP interface. Invalid indicates an error in processing the cfg recordro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.3
wfRsvpIfCctThe circuit number of this RSVP interfacero
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.4
wfRsvpIfUdpNbrsThe number of neighbors perceived to be using only the RSVP UDP Encapsulation.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.5
wfRsvpIfIpNbrsThe number of neighbors perceived to be using only the RSVP IP Encapsulation.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.6
wfRsvpIfNbrsThe number of neighbors currently perceived; this will exceed wfRsvpIfIpNbrs + wfRsvpIfUdpNbrs by the number of neighbors using both encapsulations.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.7
wfRsvpIfRefreshBlockadeMultipleThe value of the RSVP value 'Kb', Which is the minimum number of refresh intervals that blockade state will last once entered.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.8
wfRsvpIfRefreshMultipleThe value of the RSVP value 'K', which is the number of refresh intervals which must elapse (minimum) before a PATH or RESV message which is not being refreshed will be aged out.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.9
wfRsvpIfTTLThe value of SEND_TTL used on this interface for messages this node originates. If set to zero, the node determines the TTL via other means.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.10
wfRsvpIfRefreshIntervalThe value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface. UNITS millisecondsrw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.11
wfRsvpIfRouteDelayThe approximate period from the time a route is changed to the time a resulting message ap- pears on the interface. UNITS hundredths of a secondrw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.12
wfRsvpIfUdpRequiredIf TRUE, manual configuration forcees the use of UDP ncapsulation on the interface. If FALSE, UDP encapsulation is only used if wfrsvpIfUdpNbrs is not zero.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.6.1.13
wfRsvpNbrTableInformation describing the Neighbors of an RSVP system.
SEQUENCE OF WfRsvpNbrEntry
.1.3.6.1.4.1.18.3.5.16.1.1.7
wfRsvpNbrEntryInformation describing a single RSVP Neigh- bor.
WfRsvpNbrEntry
.1.3.6.1.4.1.18.3.5.16.1.1.7.1
wfRsvpNbrAddressThe IP4 or IP6 Address used by this neighbor. This object may not be changed when the value of the RowStatus object is 'valid'.ro
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.7.1.1
wfRsvpNbrProtocolThe encapsulation being used by this neigh- bor.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.7.1.2
wfRsvpNbrCctThe circuit number of the interface where the neighbor is learnedro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.7.1.3
wfRsvpNbrStatus'valid' for all neighbors. This object may be used to configure neighbors. In the presence of configured neighbors, the implementation may (but is not required to) limit the set of valid neighbors to those configured.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.7.1.4
wfSRsvp
OBJECT IDENTIFIER
.1.3.6.1.4.1.18.3.5.16.1.1.8
wfSRsvpDeleteCreate/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete Static Rsvp.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.8.1
wfSRsvpDisableEnable/Disable parameter. Default is enabled. Users perform a set operation on this object in order to enable/disable Static Rsvp.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.8.2
wfSRsvpStateThe current state of Static Rsvp.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.8.3
wfSRsvpSoloistSlotSlot for which slot Static RSVP Soloist is eligible to run on. Slots can be 1-14.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.8.4
wfSRsvpInfoLogFilterTurn Static RSVP log ON or OFF for informational and warning messages. There is only RSVP_LOG_RIF_PROCESSING 0x0001 - RIF processing. RSVP_LOG_SOLO_PROCESSING 0x0002 - SOLO processing. RSVP_LOG_ROUTE_INTF_PROCESSING 0x0004 - ROUTE interface processing. RSVP_LOG_MERGE_PROCESSING 0x0008 - MERGE processing. RSVP_LOG_DB_PROCESSING 0x0010 - database access processing. RSVP_LOG_INTSERV_INTF_PROCESSING 0x0020 - INTSERV interface processing. RSVP_LOG_CRM_INTF_PROCESSING 0x0040 - CRM interface processing. RSVP_LOG_STATIC_RSVP 0x0080 - STATIC RSVP processing. RSVP_LOG_CONTROL_PROCESSING 0x0100 - CONTROL processing. RSVP_LOG_MAP_VEC_PROCESSING 0x0200 - MAP VECTOR processing. RSVP_LOG_PROXY_PROCESSING 0x0400 - RSVP MIB PROXY processing. RSVP_LOG_REFRESH_PROCESSING 0x0800 - Path/Resv Refresh processing.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.8.5
wfSRsvpDebugLogFilterTurn Static RSVP log ON or OFF for debugging messages. The bit position is used to represent a RSVP module: RSVP_LOG_RIF_PROCESSING 0x0001 - RIF processing. RSVP_LOG_SOLO_PROCESSING 0x0002 - SOLO processing. RSVP_LOG_ROUTE_INTF_PROCESSING 0x0004 - ROUTE interface processing. RSVP_LOG_MERGE_PROCESSING 0x0008 - MERGE processing. RSVP_LOG_DB_PROCESSING 0x0010 - database access processing. RSVP_LOG_INTSERV_INTF_PROCESSING 0x0020 - INTSERV interface processing. RSVP_LOG_CRM_INTF_PROCESSING 0x0040 - CRM interface processing. RSVP_LOG_STATIC_RSVP 0x0080 - STATIC RSVP processing. RSVP_LOG_CONTROL_PROCESSING 0x0100 - CONTROL processing. RSVP_LOG_MAP_VEC_PROCESSING 0x0200 - MAP VECTOR processing. RSVP_LOG_PROXY_PROCESSING 0x0400 - RSVP MIB PROXY processing. RSVP_LOG_REFRESH_PROCESSING 0x0800 - Path/Resv Refresh processing.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.8.6
wfSRsvpTraceLogFilterTurn RSVP log ON or OFF for RSVP trace messages. The bit position is used to represent a RSVP module: RSVP_LOG_RIF_PROCESSING 0x0001 - RIF processing. RSVP_LOG_SOLO_PROCESSING 0x0002 - SOLO processing. RSVP_LOG_ROUTE_INTF_PROCESSING 0x0004 - ROUTE interface processing. RSVP_LOG_MERGE_PROCESSING 0x0008 - MERGE processing. RSVP_LOG_DB_PROCESSING 0x0010 - database access processing. RSVP_LOG_INTSERV_INTF_PROCESSING 0x0020 - INTSERV interface processing. RSVP_LOG_CRM_INTF_PROCESSING 0x0040 - CRM interface processing. RSVP_LOG_STATIC_RSVP 0x0080 - STATIC RSVP processing. RSVP_LOG_CONTROL_PROCESSING 0x0100 - CONTROL processing. RSVP_LOG_MAP_VEC_PROCESSING 0x0200 - MAP VECTOR processing. RSVP_LOG_PROXY_PROCESSING 0x0400 - RSVP MIB PROXY processing. RSVP_LOG_REFRESH_PROCESSING 0x0800 - Path/Resv Refresh processing.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.8.7
wfSRsvpRefreshIntervalThe value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given STATIC PATH or STATIC RESV message. UNITS millisecondsrw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.8.8
wfSRsvpTotalSendersThe total number of Static Sender (PATH) states in the router.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.8.9
wfSRsvpTotalReservationsThe total number of Static Reservation (RESV) states in the router.ro
Gauge
.1.3.6.1.4.1.18.3.5.16.1.1.8.10
wfSRsvpSenderTableInformation describing the state information displayed by senders statically configured.
SEQUENCE OF WfSRsvpSenderEntry
.1.3.6.1.4.1.18.3.5.16.1.1.9
wfSRsvpSenderEntryInformation describing the state information used to create a sender thru configuration.
WfSRsvpSenderEntry
.1.3.6.1.4.1.18.3.5.16.1.1.9.1
wfSRsvpSenderCreateWhether to Delete this sender PSBrw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.1
wfSRsvpSenderEnableWhether to Disable this Sender PSBrw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.2
wfSRsvpSenderStatusWhether this Static PSB is valid or notro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.3
wfSRsvpSenderNumberThe number of this static sender. This is for SNMP Indexing purposes only and has no relation to any protocol value.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.4
wfSRsvpSenderDestReplicateNumber of sessions for which this static path state should be replicated. For each replication, wfSRsvpSenderDestAddr will be incremented by one.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.5
wfSRsvpSenderReplicateNumber of senders for which this static path state should be replicated. For each replication, wfSRsvpSenderAddr will be incremented by one.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.6
wfSRsvpSenderIntegrityThe contents of the integrity object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length.rw
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.7
wfSRsvpSenderDestAddrThe destination IP address used by all senders in this session. This object may not be changed when the value of the Status object is 'valid'.rw
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.8
wfSRsvpSenderAddrThe source address used by this sender in this session. This object may not be changed when the value of the Status object is 'valid'.rw
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.9
wfSRsvpSenderDestAddrLengthThe length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.10
wfSRsvpSenderAddrLengthThe length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.11
wfSRsvpSenderProtocolThe IP Protocol used by this session. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.12
wfSRsvpSenderDestPortThe UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpSen- derProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.13
wfSRsvpSenderPortThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by RsvpStaticSenderPro- tocol is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.14
wfSRsvpSenderHopAddrThe address used by the previous RSVP hop (which may be the original sender).rw
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.15
wfSRsvpSenderHopLihThe Logical Interface Handle used by the pre- vious RSVP hop (which may be the original sender).rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.16
wfSRsvpSenderInterfaceThe ifIndex value of the interface on which this PATH message was most recently received.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.17
wfSRsvpSenderTimeValueThe value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface. UNITS millisecondsrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.18
wfSRsvpSenderTSpecRateThe Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as RsvpStaticSenderTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed rsvpSen- derTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower. UNITS, bits per secondrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.19
wfSRsvpSenderTSpecPeakRateThe Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue. UNITS, bits per secondrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.20
wfSRsvpSenderTSpecBurstThe size of the largest burst expected from the sender at a time. UNITS, bytesrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.21
wfSRsvpSenderTSpecMinTUThe minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.rw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.22
wfSRsvpSenderTSpecMaxTUThe maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.rw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.23
wfSRsvpSenderPolicyThe contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length.rw
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.24
wfSRsvpSenderAdspecIf TRUE, an adspec is sent, if FALSE, no adspec is sent.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.25
wfSRsvpSenderAdspecBreakThe global break bit general characterization parameter from the ADSPEC. If TRUE, at least one non-IS hop was detected in the path. If FALSE, no non-IS hops were detected.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.26
wfSRsvpSenderAdspecHopCountThe hop count general characterization parame- ter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not presentrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.27
wfSRsvpSenderAdspecPathBwThe path bandwidth estimate general character- ization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present UNITS, bits per secondrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.28
wfSRsvpSenderAdspecMinLatencyThe minimum path latency general characteriza- tion parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present UNITS, microsecondsrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.29
wfSRsvpSenderAdspecMtuThe composed Maximum Transmission Unit general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present UNITS, bytesrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.30
wfSRsvpSenderAdspecGSSvcIf TRUE, the ADSPEC contains a Guaranteed Ser- vice fragment. If FALSE, the ADSPEC does not contain a Guaranteed Service fragment.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.31
wfSRsvpSenderAdspecGSBreakIf TRUE, the Guaranteed Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the guaranteed service. If FALSE, and wfSRrsvpSenderAdspecGSSvc is TRUE, the 'break' bit is not set. If wfSRsvpSenderAdspecGSSvc is FALSE, this returns FALSE or noSuchValue.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.32
wfSRsvpSenderAdspecGSCtotIf wfSRsvpSenderAdspecGSSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'C' parameter. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, bytesrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.33
wfSRsvpSenderAdspecGSDtotIf wfSRsvpSenderAdspecGSSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'D' parameter. A return of zero or noSuchValue indicates one of the fol- lowing conditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, microsecondsrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.34
wfSRsvpSenderAdspecGSCsumIf wfSRsvpSenderAdspecGSSvc is TRUE, this is the composed value for the guaranteed ser- vice 'C' parameter since the last reshaping point. A return of zero or noSuchValue indi- cates one of the following conditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, bytesrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.35
wfSRsvpSenderAdspecGSDsumIf wfSRsvpSenderAdspecGSSvc is TRUE, this is the composed value for the guaranteed ser- vice 'D' parameter since the last reshaping point. A return of zero or noSuchValue indi- cates one of the following conditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, microsecondsrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.36
wfSRsvpSenderAdspecGSOverridesIf TRUE, the ADSPEC contains general parameter overrides for guaranteed service. If FALSE, the ADSPEC does not contains guaranteed service overrides. Note, if TRUE, ALL override parameters will be included and must be specified.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.37
wfSRsvpSenderAdspecGSHopCountIf wfSRsvpSenderAdspecGSSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue.rw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.38
wfSRsvpSenderAdspecGSPathBwIf wfSRsvpSenderAdspecGSSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, bits per secondrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.39
wfSRsvpSenderAdspecGSMinLatencyIf wfSRsvpSenderAdspecGSSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuch- Value indicates one of the following condi- tions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, microsecondsrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.40
wfSRsvpSenderAdspecGSMtuIf wfSRsvpSenderAdspecGSSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac- terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecGSSvc is FALSE, this returns zero or noSuchValue. UNITS, bytesrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.41
wfSRsvpSenderAdspecCLSvcIf TRUE, the ADSPEC contains a Controlled Load Service fragment. If FALSE, the ADSPEC does not contain a Controlled Load Service frag- ment.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.42
wfSRsvpSenderAdspecCLBreakIf TRUE, the Controlled Load Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not support the controlled load service. If FALSE, and wfSRsvpSenderAdspecCLSvc is TRUE, the 'break' bit is not set. If wfSRsvpSenderAdspecCLSvc is FALSE, this returns FALSE or noSuchValue.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.43
wfSRsvpSenderAdspecCLOverridesIf TRUE, the ADSPEC contains general parameter overrides for controlled load service. If FALSE, teh ADSPEC does not contains controlled load service overrides. Note, if TRUE, ALL override parameters will be included and must be specified.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.44
wfSRsvpSenderAdspecCLHopCountIf wfSRsvpSenderAdspecCLSvc is TRUE, this is the service-specific override of the hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecCLSvc is FALSE, this returns zero or noSuchValue.rw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.45
wfSRsvpSenderAdspecCLPathBwIf wfSRsvpSenderAdspecCLSvc is TRUE, this is the service-specific override of the path bandwidth estimate general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following con- ditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecCLSvc is FALSE, this returns zero or noSuchValue. UNITS, bits per secondrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.46
wfSRsvpSenderAdspecCLMinLatencyIf wfSRsvpSenderAdspecCLSvc is TRUE, this is the service-specific override of the minimum path latency general characterization parameter from the ADSPEC. A return of zero or noSuch- Value indicates one of the following condi- tions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecCLSvc is FALSE, this returns zero or noSuchValue. UNITS, microsecondsrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.47
wfSRsvpSenderAdspecCLMtuIf wfSRsvpSenderAdspecCLSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit general charac- terization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the following conditions: the invalid bit was set the parameter was not present If wfSRsvpSenderAdspecCLSvc is FALSE, this returns zero or noSuchValue. UNITS, bytesrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.9.1.48
wfSRsvpResvTableInformation describing the state information displayed by statically configured reservation.
SEQUENCE OF WfSRsvpResvEntry
.1.3.6.1.4.1.18.3.5.16.1.1.10
wfSRsvpResvEntryInformation describing the state information used to statically configure a reservation.
WfSRsvpResvEntry
.1.3.6.1.4.1.18.3.5.16.1.1.10.1
wfSRsvpResvCreateWhether to Delete this RESV RSBrw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.1
wfSRsvpResvEnableWhether to Disable this RESV RSBrw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.2
wfSRsvpResvStatus'valid' for all active RESV messages. This object may be used to install static RESV in- formation or delete RESV information.ro
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.3
wfSRsvpResvNumberThe number of this static resv. This is for SNMP Indexing purposes only and has no relation to any protocol value.ro
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.4
wfSRsvpResvDestReplicateNumber of sessions for which this static path state should be replicated. For each replication, wfSRsvpResvDestAddr will be incremented by one.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.5
wfSRsvpResvReplicateNumber of senders for which this static path state should be replicated. For each replication, wfSRsvpResvAddr will be incremented by one.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.6
wfSRsvpResvIntegrityThe contents of the integrity object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length.rw
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.7
wfSRsvpResvDestAddrThe destination address used by all senders in this session. This object may not be changed when the value of the Status object is 'valid'.rw
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.8
wfSRsvpResvSenderAddrThe source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This object may not be changed when the value of the Status object is 'valid'.rw
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.9
wfSRsvpResvDestAddrLengthThe length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.10
wfSRsvpResvSenderAddrLengthThe length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32 bits. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.11
wfSRsvpResvProtocolThe IP Protocol used by this session. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.12
wfSRsvpResvDestPortThe UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by wfSRsvpResvProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.13
wfSRsvpResvPortThe UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by wfSRsvpResvProto- col is 50 (ESP) or 51 (AH), this represents a generalized port identifier (GPI). A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the Status object is 'valid'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.14
wfSRsvpResvFilterSpecNumFor SE reservation style, this is the number of filter specs. For WF and FF styles, this is ignored. If SE style, there must be wfSRsvpResvFilterSpecNum SenderAddr and SenderPort entries where SenderPort 'j' is used by SenderAddr 'j'.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.15
wfSRsvpResvHopAddrThe address used by the next RSVP hop (which may be the ultimate receiver).rw
IpAddress
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.16
wfSRsvpResvHopLihThe Logical Interface Handle received from the previous RSVP hop (which may be the ultimate receiver).rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.17
wfSRsvpResvInterfaceThe ifIndex value of the interface on which this RESV message was most recently received.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.18
wfSRsvpResvTimeValueThe value of the RSVP value 'R', which is the minimum period between refresh transmissions of a given PATH or RESV message on an interface. UNITS millisecondsrw
INTEGER (0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.19
wfSRsvpResvServiceThe QoS Service classification requested by the receiver.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.20
wfSRsvpResvTSpecRateThe Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as wfSRsvpResvTSpec- PeakRate (if supported by the service model); however, averaged across two or more burst in- tervals, the rate should not exceed wfSRsvpResvTSpecRate. Note that this is a prediction, often based on the general capability of a type of codec or particular encoding; the measured average rate may be significantly lower. UNITS, bits per secondrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.21
wfSRsvpResvTSpecPeakRateThe Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the effects of jitter in the network. If not specified in the TSpec, this returns zero or noSuchValue. UNITS, bits per secondrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.22
wfSRsvpResvTSpecBurstThe size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, the receiver is asking the network to provide flow pacing beyond what would be provided under normal circumstances. Such pac- ing is at the network's option. UNITS, bytesrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.23
wfSRsvpResvTSpecMinTUThe minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size.rw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.24
wfSRsvpResvTSpecMaxTUThe maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus the interface headers, exceed the interface MTU.rw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.25
wfSRsvpResvTSpecLevelIf the service is predictive or controlled- delay, this is the service level that is being requested. Otherwise, it is zero, or the agent may return noSuchValue.rw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.26
wfSRsvpResvRSpecRateIf the requested service is Guaranteed, as specified by wfSRsvpResvService, this is the clearing rate that is being requested. Other- wise, it is zero, or the agent may return noSuchValue. UNITS, bits per secondrw
INTEGER(0..'7FFFFFFF'h)
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.27
wfSRsvpResvRSpecSlackIf the requested service is Guaranteed, as specified by wfSRsvpResvService, this is the delay slack. Otherwise, it is zero, or the agent may return noSuchValue.UNITS, microsecondsrw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.28
wfSRsvpResvScopeNumThe number of addresses in wfSRsvpResvScope. In the absence of the scope object, this should be zerorw
INTEGER
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.29
wfSRsvpResvScopeThe contents of the scope object, displayed as an uninterpreted string of octets. In the absence of such an object, this should be of zero length. If the length is non-zero, this contains a series of IP4 or IP6 addresses.rw
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.30
wfSRsvpResvSharedIf TRUE, a reservation shared among senders is requested. If FALSE, a reservation specific to this sender is requested.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.31
wfSRsvpResvExplicitIf TRUE, individual senders are listed using Filter Specifications. If FALSE, all senders are implicitly selected. The Scope Object will contain a list of senders that need to receive this reservation request for the purpose of routing the RESV message.rw
Enumeration
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.32
wfSRsvpResvPolicyThe contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence of such an object, this should be of zero length.rw
OCTET STRING
.1.3.6.1.4.1.18.3.5.16.1.1.10.1.33
Wellfleet-RSVP-MIB - SNMP MIB Reference | MIBs Explorer