Wellfleet-RF-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
95
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
95 total| Object Name |
|---|
RFC1155-SMIThe list of Rip Import Route Filter Rules in IP SEQUENCE OF WfIpRfRipImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.8 |
wfIpRfRipExportTableThe list of Rip Export Route Filter Rules in IP SEQUENCE OF WfIpRfRipExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.9 |
wfIpRfRipExportEntryAn entry in the Rip Export Rule Table WfIpRfRipExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.9.1 |
wfIpRfRipExportCreateCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.9.1.1 |
wfIpRfRipExportEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.9.1.2 |
wfIpRfRipExportAddressThe IP address to which this filter appliesro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.9.1.3 |
wfIpRfRipExportMaskThe Mask for the Address Above. When combined
with the Address, a range is specified for application
of this filter rulero IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.9.1.4 |
wfIpRfRipExportFromProtocolThe protocol from which this Information is derivedro Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.9.1.5 |
wfIpRfRipExportActionThe action of this export filter;
if IP_RF_RIP_EXP_ACTION_AGGREGATE action, the default
route, 0.0.0.0, is advertised instead networks that match
this filterrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.9.1.6 |
wfIpRfRipExportInterfaceThe optional outbound interface on which to apply this filterro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.9.1.7 |
wfIpRfRipExportRipMetricThe optional export RIP metric to apply to this filter.
Zero means: use the route's actual cost. Only valid for propagaterw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.9.1.8 |
wfIpRfOspfImportTableThe list of OSPF Import Route Filter Rules in IP SEQUENCE OF WfIpRfOspfImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.10 |
wfIpRfOspfImportEntryAn entry in the OSPF Import Route Filter Table WfIpRfOspfImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.10.1 |
wfIpRfOspfImportCreateCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.10.1.1 |
wfIpRfOspfImportEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.10.1.2 |
wfIpRfOspfImportAddressThe IP Address to which this filter appliesro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.10.1.3 |
wfIpRfOspfImportMaskThe Mask to which this filter applies. When combined
with the Address, a range is specified for application
of this rulero IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.10.1.4 |
wfIpRfOspfImportActionThe Action of this Filterrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.10.1.5 |
wfIpRfOspfImportPreferenceThe Preference associated with this filter - only valid if acceptrw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.10.1.6 |
wfIpRfOspfImportTypeThe OSPF route Type to be concerned with. The valid values are null
(any route type), 1 (OSPF external type 1), and 2 (OSPF external
type 2).ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.10.1.7 |
wfIpRfOspfImportTagThe OSPF Tag to be concerned withro Gauge .1.3.6.1.4.1.18.3.5.3.2.1.10.1.8 |
wfIpRfOspfExportTableThe list of OSPF Export Route Filter Rules in IP SEQUENCE OF WfIpRfOspfExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.11 |
wfIpRfOspfExportEntryAn entry in the OSPF Export Route Filter Table WfIpRfOspfExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.11.1 |
wfIpRfOspfExportCreateCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.11.1.1 |
wfIpRfOspfExportEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.11.1.2 |
wfIpRfOspfExportAddressThe IP address to which this filter appliesro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.11.1.3 |
wfIpRfOspfExportMaskThe Mask for the Address Above. When combined
with the Address, a range is specified for application
of this filter rulero IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.11.1.4 |
wfIpRfOspfExportFromProtocolThe protocol from which this Information is derivedro Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.11.1.5 |
wfIpRfOspfExportActionThe action of this export filterrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.11.1.6 |
wfIpRfOspfExportTypeThe ospf type to use when this filter matchesrw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.11.1.7 |
wfIpRfOspfExportTagThe ospf tag to use when this filter matchesrw Gauge .1.3.6.1.4.1.18.3.5.3.2.1.11.1.8 |
wfIpRfOspfExportAutoTagBGP/OSPF automatic tag generation: if enabled, a tag will be
generated according to the criteria in RFC 1364. Only valid if
wfIpRfOspfExportType is set. If enabled, wfIpRfOspfExportTag
is ignored.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.11.1.9 |
wfIpRfEgpImportTableThe list of Egp Import Route Filter Rules in IP SEQUENCE OF WfIpRfEgpImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.12 |
wfIpRfEgpImportEntryAn entry in the Egp Import Rule Table WfIpRfEgpImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.12.1 |
wfIpRfEgpImportCreateCreate/Delete parameter. Default is created. Users perform an SNMP
SET operation on this object in order to create/delete this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.12.1.1 |
wfIpRfEgpImportEnableEnable/Disable parameter. Default is enabled. Users perform an SNMP
SET operation on this object in order to enable/disable this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.12.1.2 |
wfIpRfEgpImportAddressThe advertised network to which this filter appliesro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.12.1.3 |
wfIpRfEgpImportMaskThe Mask of the Address to which this filter applies.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.12.1.4 |
wfIpRfEgpImportActionThe Action of this Filterrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.12.1.5 |
wfIpRfEgpImportPreferenceThe Preference associated with this filter - only valid if acceptrw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.12.1.6 |
wfIpRfEgpImportPeerThe Egp Peer to be to be concerned withro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.12.1.7 |
wfIpRfEgpImportAsThe Autonomous System number to be concerned withro INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.12.1.8 |
wfIpRfEgpImportGatewayThe EGP gateway to be concerned withro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.12.1.9 |
wfIpRfEgpExportTableThe list of Egp Export Route Filter Rules in IP SEQUENCE OF WfIpRfEgpExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.13 |
wfIpRfEgpExportEntryAn entry in the Egp Export Rule Table WfIpRfEgpExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.13.1 |
wfIpRfEgpExportCreateCreate/Delete parameter. Default is created. Users perform an SNMP
SET operation on this object in order to create/delete this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.13.1.1 |
wfIpRfEgpExportEnableEnable/Disable parameter. Default is enabled. Users perform an SNMP
SET operation on this object in order to enable/disable this Rule.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.13.1.2 |
wfIpRfEgpExportAddressThe advertised network to which this filter appliesro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.13.1.3 |
wfIpRfEgpExportMaskThe Mask of the Address to which this filter applies.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.13.1.4 |
wfIpRfEgpExportFromProtocolThe protocol from which this Information is derivedro Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.13.1.5 |
wfIpRfEgpExportActionThe action of this export filterrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.13.1.6 |
wfIpRfEgpExportPeerThe Egp Peer to be to be concerned withro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.13.1.7 |
wfIpRfEgpExportOspfTypeThe type of route being filtered. This field is only valid if the
wfIpRfEgpExportFromProtocol is OSPF. Otherwise, the field is 0.ro Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.13.1.8 |
wfIpRfEgpExportOspfTagThe tag of the route being filtered. This field is only valid if
the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, this field is 0.ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.13.1.9 |
wfIpRfEgpExportInterfaceThe optional outbound interface on which to apply this filterrw IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.13.1.10 |
wfIpRfEgpExportMetricThe optional export Egp metric to apply to this filter. Zero means:
use the route's actual cost. Only valid for propagaterw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.13.1.11 |
wfIpRfBgp3ImportTableThe table of BGP-3 Import Route Filter Rules SEQUENCE OF WfIpRfBgp3ImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.14 |
wfIpRfBgp3ImportEntryAn entry in the BGP-3 Import Rule Table WfIpRfBgp3ImportEntry .1.3.6.1.4.1.18.3.5.3.2.1.14.1 |
wfIpRfBgp3ImportCreateCreate/Delete parameter. if set to delete, the rule is removed.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.14.1.1 |
wfIpRfBgp3ImportEnableEnable/Disable parameter. controls whether the rule is enabled
or disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.14.1.2 |
wfIpRfBgp3ImportAddressThe advertised network to which this filter applies. Zero implies
`all networks' or the default route, based on
wfIpRfBgp3ImportMask.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.14.1.3 |
wfIpRfBgp3ImportMaskThe mask applied to wfIpRfBgp3ImportAddress. If zero, this filter
applies to all networks. If the address is zero and this parameter
is 255.255.255.255, this filter applies to the default route.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.14.1.4 |
wfIpRfBgp3ImportActionThe Action of this Filterrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.14.1.5 |
wfIpRfBgp3ImportPreferenceThe Preference associated with this filter - only valid if acceptrw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.14.1.6 |
wfIpRfBgp3ImportPeerAsThe BGP-3 Peer's AS number (or zero if `any AS')ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.14.1.7 |
wfIpRfBgp3ImportPeerAddressThe IP address (not the peer ID) of the peer that this advertisement
was received from (zero if `any peer')ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.14.1.8 |
wfIpRfBgp3ImportOrigAsThe AS number of the BGP-3 gateway that originated the route
(or zero for `any AS')ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.14.1.9 |
wfIpRfBgp3ImportRouteOriginA value for the ORIGIN path attribute (or zero if not applicable)ro Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.14.1.10 |
wfIpRfBgp3ImportBgp3PreferenceThe Preference associated with this filter for comparison to
other BGP routes only - only valid if acceptrw Gauge .1.3.6.1.4.1.18.3.5.3.2.1.14.1.11 |
wfIpRfBgp3ExportTableThe table of BGP-3 Export Route Filter Rules SEQUENCE OF WfIpRfBgp3ExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.15 |
wfIpRfBgp3ExportEntryAn entry in the BGP-3 Export Rule Table WfIpRfBgp3ExportEntry .1.3.6.1.4.1.18.3.5.3.2.1.15.1 |
wfIpRfBgp3ExportCreateCreate/Delete: if set to delete, the rule is removedrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.15.1.1 |
wfIpRfBgp3ExportEnableEnable/Disable: controls whether the rule is enabled or disabledrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.15.1.2 |
wfIpRfBgp3ExportAddressThe advertised network to which this filter applies. Zero implies
`all networks' or the default route, based on
wfIpRfBgp3ExportMask.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.15.1.3 |
wfIpRfBgp3ExportMaskThe mask applied to wfIpRfBgp3ExportAddress. If zero, this filter
applies to all networks. If the address is zero and this parameter
is 255.255.255.255, this filter applies to the default route.ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.15.1.4 |
wfIpRfBgp3ExportFromProtocolThe protocol from which this Information is derivedro Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.15.1.5 |
wfIpRfBgp3ExportActionThe action of this export filter;
if IP_RF_BGP3_EXP_ACTION_AGGREGATE action, the default
route, 0.0.0.0, is advertised instead networks that match
this filterrw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.15.1.6 |
wfIpRfBgp3ExportPeerAsThe AS number to which the network advertisement is going (zero
if `any AS')ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.15.1.7 |
wfIpRfBgp3ExportPeerAddressThe IP address (not the peer ID) of the peer that this advertisement
is going to (zero if `any peer')ro IpAddress .1.3.6.1.4.1.18.3.5.3.2.1.15.1.8 |
wfIpRfBgp3ExportOspfTypeThe type of route being filtered. This field is only valid if the
wfIpRfEgpExportFromProtocol is OSPF. Otherwise, the field is 0.ro Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.15.1.9 |
wfIpRfBgp3ExportOspfTagThe OSPF tag of the route being filtered. This field is only valid
if the wfIpRfBgp3ExportFromProtocol is OSPF and
wfIpRfBgp3ExportOspfType is external type 1 or 2. Otherwise,
this field is 0.ro INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.15.1.10 |
wfIpRfBgp3ExportUseMetricDetermines whether or not an INTER_AS_METRIC will be advertised
for the associated network(s). none (1) indicates that no
metric will be advertised. specified (2) indicates that the
value in wfIpRfBgp3ExportInterAsMetric will be used.
originating (3) indicates that the metric from the originating
protocol will be used. Only valid for propagate.rw Enumeration .1.3.6.1.4.1.18.3.5.3.2.1.15.1.11 |
wfIpRfBgp3ExportInterAsMetricIf wfIpRfBgp3ExportUseMetric is set to specified (2),
this is the value that will be used for the INTER_AS_METRIC.
Only valid for propagate.rw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.15.1.12 |
wfIpRfBgp3ExportOriginThe value to use for the ORIGIN path attribute when advertising
this route (zero means `do according to default'). Only valid for
propagate action. Only valid if route origin is RIP or STATIC
(ignored otherwise).rw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.15.1.13 |
wfIpRfBgp3ExportNeighAsIf action is propagate, route origin is RIP or STATIC, and
ExportOrigin is EGP, this AS number is used as the EGP neighbor
AS number when constructing the AS-PATH (ignored otherwise).rw INTEGER .1.3.6.1.4.1.18.3.5.3.2.1.15.1.14 |
wfIpRfRipImportEntryAn entry in the Rip Import Rule Table WfIpRfRipImportEntry .wfIpRfRipImportTable.1 |
wfIpRfRipImportCreateCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this Rule.rw Enumeration .wfIpRfRipImportTable.1.1 |
wfIpRfRipImportEnableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this Rule.rw Enumeration .wfIpRfRipImportTable.1.2 |
wfIpRfRipImportAddressThe IP address to which this filter appliesro IpAddress .wfIpRfRipImportTable.1.3 |
wfIpRfRipImportMaskThe Mask to which this filter applies. When combined
with the Address, a range is specified for application
of this rulero IpAddress .wfIpRfRipImportTable.1.4 |
wfIpRfRipImportActionThe Action of this Filterrw Enumeration .wfIpRfRipImportTable.1.5 |
wfIpRfRipImportPreferenceThe Preference associated with this filter - only valid if acceptrw INTEGER .wfIpRfRipImportTable.1.6 |
wfIpRfRipImportRipGatewayThe RIP Gateway to be concerned withro IpAddress .wfIpRfRipImportTable.1.7 |
wfIpRfRipImportRipInterfaceThe IP Network Interface to be concerned withro IpAddress .wfIpRfRipImportTable.1.8 |
wfIpRfRipImportApplyMaskThe Mask to apply to this route learned instead of the default.
NULL means to apply the normal filterrw IpAddress .wfIpRfRipImportTable.1.9 |