Wellfleet-PPP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
224
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
224 total| Object Name |
|---|
RFC1155-SMIThe Wellfleet PPP Line Configuration Table containing
attributes dealing with the link layer and the Link Control
Protocol (LCP) SEQUENCE OF WfPppLineEntry .1.3.6.1.4.1.18.3.5.9.2.1 |
wfPppCircuitTableThe Wellfleet PPP Circuit Configuration Table containing
attributes dealing with the network layer and each
Network Control Protocol (NCP) SEQUENCE OF WfPppCircuitEntry .1.3.6.1.4.1.18.3.5.9.2.2 |
wfPppCircuitEntryper Wellfleet circuit PPP configuration parameters and
counters WfPppCircuitEntry .1.3.6.1.4.1.18.3.5.9.2.2.1 |
wfPppCircuitDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.1 |
wfPppCircuitStatePPP state variable, Not Present, Init, Down, Upro Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.2 |
wfPppCircuitIpcpCurrentStatethe current state of the IPCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.3 |
wfPppCircuitOsinlcpCurrentStatethe current state of the OSINLCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.4 |
wfPppCircuitXnscpCurrentStatethe current state of the XNSCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.5 |
wfPppCircuitDncpCurrentStatethe current state of the DNCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.6 |
wfPppCircuitAtcpCurrentStatethe current state of the ATCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.7 |
wfPppCircuitIpxcpCurrentStatethe current state of the IPXCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.8 |
wfPppCircuitBncpCurrentStatethe current state of the BNCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.9 |
wfPppCircuitVncpCurrentStatethe current state of the VNCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.10 |
wfPppCircuitIDcct number for this instancero INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.11 |
wfPppCircuitIpDisableenable/disable IP Protocol - disabling generates
a Close event to the IPCP FSM and consequently disallows
IP traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.12 |
wfPppCircuitOsinlDisableenable/disable OSI Network Layer Protocol -
disabling generates a Close event to the OSINLCP FSM
and consequently disallows OSI traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.13 |
wfPppCircuitXnsDisableenable/disable XNS Protocol - disabling generates
a Close event to the XNSCP FSM and consequently
disallows XNS traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.14 |
wfPppCircuitDecnetDisableenable/disable DECnet Protocol - disabling generates
a Close event to the DNCP FSM and consequently
disallows DECnet traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.15 |
wfPppCircuitAppletalkDisableenable/disable AppleTalk Protocol - disabling generates
a Close event to the ATCP FSM and consequently
disallows AppleTalk traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.16 |
wfPppCircuitIpxDisableenable/disable IPX Protocol - disabling generates
a Close event to the IPXCP FSM and consequently
disallows IPX traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.17 |
wfPppCircuitBridgeDisableenable/disable the Bridge - disabling generates
a Close event to the BNCP FSM and consequently
disallows bridge traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.18 |
wfPppCircuitVinesDisableenable/disable Vines Protocol - disabling generates
a Close event to the VNCP FSM and consequently
disallows Vines traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.19 |
wfPppCircuitCfgLocalIpAddrthe IP address we're going to userw IpAddress .1.3.6.1.4.1.18.3.5.9.2.2.1.20 |
wfPppCircuitLocalIpAddrthe IP address our peer wants us to usero IpAddress .1.3.6.1.4.1.18.3.5.9.2.2.1.21 |
wfPppCircuitCfgRemoteIpAddrthe IP address we want our peer to userw IpAddress .1.3.6.1.4.1.18.3.5.9.2.2.1.22 |
wfPppCircuitRemoteIpAddrthe IP address our peer wants to usero IpAddress .1.3.6.1.4.1.18.3.5.9.2.2.1.23 |
wfPppCircuitCfgIpxNetworkNumberthe configured IPX Network Number to be used by
both us and our peerrw OCTET STRING .1.3.6.1.4.1.18.3.5.9.2.2.1.24 |
wfPppCircuitIpxNetworkNumberthe result of IPX Network Number negotiationro OCTET STRING .1.3.6.1.4.1.18.3.5.9.2.2.1.25 |
wfPppCircuitIpxRemoteNodeNumberthis is what we'll tell our peer to use for node
number if it sends us a 0rw OCTET STRING .1.3.6.1.4.1.18.3.5.9.2.2.1.26 |
wfPppCircuitCfgIpxRoutingProtocolthe desired IPX Routing Protocol to be used on
the linkrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.27 |
wfPppCircuitIpxRoutingProtocolthe negotiated IPX Routing Protocol to be used on
the linkro INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.28 |
wfPppCircuitLocalIpxRouterNameour IPX Router Namerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.2.2.1.29 |
wfPppCircuitRemoteIpxRouterNameour peer's IPX Router Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.2.2.1.30 |
wfPppCircuitIpxConfigCompleteindicates whether or not IPXCP converged on all
required optionsro Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.31 |
wfPppCircuitCfgAtNetworkthe configured AppleTalk network number - our
peer must use the same numberrw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.32 |
wfPppCircuitAtNetworkthe AppleTalk network number we agreed to usero INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.33 |
wfPppCircuitCfgLocalAtNodethe AppleTalk node number we're configured to userw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.34 |
wfPppCircuitLocalAtNodeour AppleTalk node number after negotiationro INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.35 |
wfPppCircuitCfgRemoteAtNodethe AppleTalk node number we want our peer to userw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.36 |
wfPppCircuitRemoteAtNodeour peer's AppleTalk node number after negotiationro INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.37 |
wfPppCircuitCfgAtRoutingProtocolthe desired AppleTalk Routing Protocol to be used on
the linkrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.38 |
wfPppCircuitAtRoutingProtocolthe negotiated AppleTalk Routing Protocol to be used on
the linkro INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.39 |
wfPppCircuitCfgBridgeEnetallow/disallow Ethernet bridged framesrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.40 |
wfPppCircuitBridgeEnetresult of bridge MAC type negotiation for
Ethernetro Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.41 |
wfPppCircuitCfgBridgeFddiallow/disallow FDDI bridged framesrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.42 |
wfPppCircuitBridgeFddiresult of bridge MAC type negotiation for
FDDIro Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.43 |
wfPppCircuitCfgBridgeTokenRingallow/disallow Token Ring bridged framesrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.44 |
wfPppCircuitBridgeTokenRingresult of bridge MAC type negotiation for
Token Ringro Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.45 |
wfPppCircuitBadPacketsthese are packets not in correct PPP formatro Counter .1.3.6.1.4.1.18.3.5.9.2.2.1.46 |
wfPppCircuitLastBadPacketthis is the first 16 bytes of the last bad packet
we receivedro OCTET STRING .1.3.6.1.4.1.18.3.5.9.2.2.1.47 |
wfPppCircuitCcpCurrentStatethe current state of the CCP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.48 |
wfPppCircuitCcpDisableenable/disable compression - disabling generates
a Close event to the CCP FSM and consequently
disallows compression traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.49 |
wfPppCircuitPppModePre 9.0 multilines can only negotiate LCP over 1 line. The
exact line which LCP will occur on is unknown. So in order
to handle this situation we will wait until we receive an
LCP Request before we attempt to negotiate LCP by setting
the mode to PPP_MODE_PEER_SOLICITED_LCP_NEGO. If we are using
this line as a single PPP Line or we are sure our peer can
handle LCP on all the members of the multiline, PPP_MODE_NORMAL
should be selected.
Multilink is a PPP protocol extension which provides restoration
of packets which arrive out of sequence, a possibility with
multiple lines.
Multilink monitor, in conjunction with other configuration data
allows the throughput of a line to be monitored. Additional
lines can be brought into the bundle and taken down dynamically
in response to data traffic volume and other conditions.rw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.50 |
wfPppCircuitMLFragPermThis parameter allows interoperability with PPP Multilink
implementations which do not allow fragmentation.rw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.51 |
wfPppCircuitExamPeriodThis indicates the interval that the Multilink bundle should
be polled for possible congestion. This value is in
tenths of a secondrw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.52 |
wfPppCircuitFullThresholdThis is the percentage of the theoretical maximum line
throughput that must be reached or exceeded before the line is
considered congested.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.53 |
wfPppCircuitPeriodsCngThis is the number of consecutive periods where the line
throughput is above the congestion threshold required to declare
the line congested and attempt corrective action.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.54 |
wfPppCircuitPrefBwSlotThis is the preferred bandwidth slot.
When lines are requested to be added to the Multilink bundle
this parameter denotes the slot which is asked first.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.55 |
wfPppCircuitResvBwSlotThis is the reserve bandwidth slot.
When lines are requested to be added to the Multilink bundle
this parameter denotes the slot which is asked if the preferred
slot can not provide a line.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.56 |
wfPppCircuitMLFragTriggerSizeThis is the minimum size of a packet of which Multilink
will fragment.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.57 |
wfPppCircuitMaxLinksThis is the maximum number of links allowed in the Multilink
bundle for this circuit at any one time.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.58 |
wfPppCircuitRecoverThresholdThis is the recovery threshold expressed as a percentage of the
theoretical maximum bundle throughput. The actual throughput must fall
below this percentage in order for the BOD circuit to
begin to remove lines from the Multilink bundle.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.59 |
wfPppCircuitPeriodsUnCngThis parameter is used for recovery. Once a Multilink bundle has
been declared as congested, this is the number of
consecutive examination periods where the queue depth is
below the recovery threshold value required to declare that the
bundle is no longer congested.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.60 |
wfPppCircuitHistoryDEBUG parameter - This is the BOD history buffer.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.2.2.1.61 |
wfPppCircuitDebugFlagDEBUG parameter - This is the BOD Debug flag, used to control
debug code for BOD.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.62 |
wfPppCircuitActualModeThis attribute is the actual ppp mode of the circuit after
LCP has negotiated.ro Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.63 |
wfPppCircuitMaxBuffersThis is the maximum number of stored buffers allowed in the
Multilink Receive logic for this circuit at any one time.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.64 |
wfPppCircuitLinksConfiguredThis is the current number of lines configured for this
Multilink circuit.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.2.1.65 |
wfPppCircuitBacpDisableenable/disable BACP Protocol - disabling generates
a Close event to the BACP FSM and consequently
disallows BAP traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.66 |
wfPppCircuitBacpCurrentStatethe current state of the BACP Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.67 |
wfPppCircuitBacpNoPhoneNumenable/disable sending of the No-Phone-Number-Needed option
in BACP Call Request packetsrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.68 |
wfPppCircuitIpv6Disableenable/disable IPv6 Protocol - disabling generates
a Close event to the IPv6CP FSM and consequently disallows
IPv6 traffic on this circuitrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.69 |
wfPppCircuitIpv6CurrentStatethe current state of the Ipv6 Finite State Machinero Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.70 |
wfPppCircuitCcpTypeSpecifies whether to use CCP or Individual Link CCPrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.71 |
wfPppCircuitCfgCcpOptionsSpecifies the compression protocol options in 1st
config-requestrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.72 |
wfPppCircuitCcpOptionsThe negotiated compression protocol optionro Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.73 |
wfPppCircuitStacLZSCheckModeSpecifies the check mode for STAC LZS compression protocol. See
RFC 1974 for more information.rw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.74 |
wfPppCircuitMLFragStrictenable/disable strict fragmentation algorithm i.e. fragmenting a
packet when its size exceeds the threshold regardless of what the
average packet size isrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.75 |
wfPppCircuitLampreyCompDisableenable/disable hardware compression, either from the compression
daugther card on the Lamprey or the old compression daugther
interface card on the link module, it tells you where the
compression hardware isrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.76 |
wfPppCircuitMsgLevelPPP Circuit log messages level.
To control level of log messages
DBG_MSG_ALL 0x001f0000 - 2031616
DBG_MSG_DEBUG 0x00010000 - 65536
DBG_MSG_INFO 0x00020000 - 131072
DBG_MSG_WARNING 0x00040000 - 262144
DBG_MSG_FAULT 0x00080000 - 524288
DBG_MSG_TRACE 0x00100000 - 1048576rw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.77 |
wfPppCircuitTypeTo differentiate between a Dial Up PPP circuit from L2TP and Leased Linerw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.78 |
wfPppCircuitWRCompatabilityEnable WebRanger compatability that allows us to accept a config-ack
after receiving an invalid config-reqrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.2.1.79 |
wfPppWhoamiTableThe Wellfleet PPP WHOAMI Table, containing a mapping of
peer CHAP Names and the circuit numbers they map to SEQUENCE OF WfPppWhoamiEntry .1.3.6.1.4.1.18.3.5.9.2.3 |
wfPppWhoamiEntryMap the value of this entry's CHAP Name to the
value of this entry's CCT number WfPppWhoamiEntry .1.3.6.1.4.1.18.3.5.9.2.3.1 |
wfPppWhoamiDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.3.1.1 |
wfPppWhoamiNamePeer CHAP Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.2.3.1.2 |
wfPppWhoamiCircuitCircuit number to map torw INTEGER .1.3.6.1.4.1.18.3.5.9.2.3.1.3 |
wfPppWhoamiSecretPeer CHAP Secretrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.2.3.1.4 |
wfPppWhoamiPapPasswordPeer Pap Passwordrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.2.3.1.5 |
wfPppWhoamiCctGrpUnnumbered circuit group to map torw INTEGER .1.3.6.1.4.1.18.3.5.9.2.3.1.6 |
wfPppMlStatsTableThe Wellfleet PPP Multilink Stats Table, containing statistics
for each Multilink Circuit SEQUENCE OF WfPppMlStatsEntry .1.3.6.1.4.1.18.3.5.9.2.4 |
wfPppMlStatsEntryper Wellfleet circuit PPP Multilink counters WfPppMlStatsEntry .1.3.6.1.4.1.18.3.5.9.2.4.1 |
wfPppMlStatsDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.4.1.1 |
wfPppMlStatsCircuitIDcct number for this instancero INTEGER .1.3.6.1.4.1.18.3.5.9.2.4.1.2 |
wfPppMlStatsHomeSlotSlot on which this Multilink Control Subsystem existsro INTEGER .1.3.6.1.4.1.18.3.5.9.2.4.1.3 |
wfPppMlStatsLineCntCurrent count of lines in Multilink bundlero Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.4 |
wfPppMlStatsBundleSpdCurrent total bandwidth of Multilink bundlero Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.5 |
wfPppMlStatsMrruCurrent Maximum Receive Reconstructed Unit (MRRU)
in use for Multilink bundlero Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.6 |
wfPppMlStatsEndptDiscCurrent Endpoint Discriminator in use for
Multilink bundlero OCTET STRING .1.3.6.1.4.1.18.3.5.9.2.4.1.7 |
wfPppMlStatsTxOctetsNumber of octets transmitted by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.8 |
wfPppMlStatsTxPktsNumber of packets transmitted by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.9 |
wfPppMlStatsAvgTxListLenAverage number of packets received in the transient
list by the Multilink Transmit gate.ro Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.10 |
wfPppMlStatsRxOctetsNumber of octets received without errorro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.11 |
wfPppMlStatsRxPktsNumber of packets received by Multilinkro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.12 |
wfPppMlStatsReasmFailsNumber of packet reassembly failuresro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.13 |
wfPppMlStatsSeqNumberLostNumber of Multilink packets considered to be lost on
the wirero Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.14 |
wfPppMlStatsSeqNumberArrivedLateNumber of Multilink packets which arrive
containing an old Sequence Number. IE: packets
with a more current Sequence Number have already
been sent up to NCPro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.15 |
wfPppMlStatsReSeqBufferCntNumber of Multilink packets currently stored
in the ReSequencing buffer pool.ro Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.16 |
wfPppMlStatsReSeqBufferMaxThe Maximum Number of Multilink packets stored
in the ReSequencing buffer pool.ro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.17 |
wfPppMlStatsExceededBufferMaxThe number of times a buffer needed to be stored by the
Multilink Receive logic when the count of buffers stored,
wfPppMlStatsReSeqBufferMax,was equal to the maximum allowable
for this circuit, wfPppCircuitMaxBuffers.ro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.18 |
wfPppMlStatsLinkIdleEventsThe number of times the Multilink Receive logic detected a
stored buffer received on a line which has been declared idle.ro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.19 |
wfPppMlStatsCalcPercentenable/disable collection of Rx percentage line usagerw Enumeration .1.3.6.1.4.1.18.3.5.9.2.4.1.20 |
wfPppMlStatsDebugDEBUG parameter - this is used to control debug code for the Multilink subsystemrw INTEGER .1.3.6.1.4.1.18.3.5.9.2.4.1.21 |
wfPppMlStatsReassmBufferCntNumber of Multilink packets currently stored
in the Reassembling buffer pools.ro Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.22 |
wfPppMlStatsReassmBufferMaxThe Maximum Number of Multilink packets stored
in the Reassembling buffer pools.ro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.23 |
wfPppMlStatsNumPktsFragmentedThe Number of Multilink packets that were
fragmented.ro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.24 |
wfPppMlStatsPQHiXmitsHigh priority transmit count.ro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.25 |
wfPppMlStatsPQNormalXmitsNormal priority transmit count.ro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.26 |
wfPppMlStatsPQLoXmitsLow priority transmit countro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.27 |
wfPppMlStatsPQHiClippedPktsHigh priority transmit clip Countro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.28 |
wfPppMlStatsPQNormalClippedPktsNormal priority transmit clip Countro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.29 |
wfPppMlStatsPQLoClippedPktsLow priority transmit clip Countro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.30 |
wfPppMlStatsPQIntrQHighWaterPktsInterrupt-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.31 |
wfPppMlStatsPQHiQHighWaterPktsHigh-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.32 |
wfPppMlStatsPQNormalQHighWaterPktsNormal-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.33 |
wfPppMlStatsPQLoQHighWaterPktsLow-priority Queue high-water markro Gauge .1.3.6.1.4.1.18.3.5.9.2.4.1.34 |
wfPppMlStatsPQHighWaterPktsClearAttribute to clear the high-water marks. When the MIB
changes, Priority Queueing (if ENABLED) checks to see
if HighWaterPktsClear is different than the last time the MIB
was modified in any way. If it is different,
all the high water marks (see above) are set to zero.rw INTEGER .1.3.6.1.4.1.18.3.5.9.2.4.1.35 |
wfPppMlStatsPQDroppedPktsPackets which were filtered in Priority Queueingro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.36 |
wfPppMlStatsPQLargePktsLarge Packets which became an exception to latency rulesro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.37 |
wfPppMlStatsPQHiTotalOctetsRunning total of High Octets transmitted when
using Bandwidth Allocation dequeueing algorithmro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.38 |
wfPppMlStatsPQNormalTotalOctetsRunning total of Normal Octets transmitted when
using Bandwidth Allocation dequeueing algorithmro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.39 |
wfPppMlStatsPQLoTotalOctetsRunning total of Low Octets transmitted when
using Bandwidth Allocation dequeueing algorithmro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.40 |
wfPppMlStatsPQPktsNotQueuedPackets that were not Queued or Dropped by
Priority Queuingro Counter .1.3.6.1.4.1.18.3.5.9.2.4.1.41 |
wfPppBapStatsTableThe Wellfleet PPP BAP Stats Table, containing statistics
for each BACP Circuit SEQUENCE OF WfPppBapStatsEntry .1.3.6.1.4.1.18.3.5.9.2.5 |
wfPppBapStatsEntryper Wellfleet circuit PPP BAP counters WfPppBapStatsEntry .1.3.6.1.4.1.18.3.5.9.2.5.1 |
wfPppBapStatsDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.2.5.1.1 |
wfPppBapStatsCircuitIDcct number for this instancero INTEGER .1.3.6.1.4.1.18.3.5.9.2.5.1.2 |
wfPppBapCallReqTxNumber of Call Requests transmitted by BAPro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.3 |
wfPppBapCallRespAckTxNumber of Call Responses transmitted by BAP
with a Response Code of Request_Ackro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.4 |
wfPppBapCallRespNakTxNumber of Call Responses transmitted by BAP
with a Response Code of Request_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.5 |
wfPppBapCallRespFullNakTxNumber of Call Responses transmitted by BAP
with a Response Code of Request_Full_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.6 |
wfPppBapCallRespRejTxNumber of Call Responses transmitted by BAP
with a Response Code of Request_Rejro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.7 |
wfPppBapCallbackReqTxNumber of Callback Requests transmitted by BAPro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.8 |
wfPppBapCallbackRespAckTxNumber of Callback Responses transmitted by BAP
with a Response Code of Request_Ackro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.9 |
wfPppBapCallbackRespNakTxNumber of Callback Responses transmitted by BAP
with a Response Code of Request_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.10 |
wfPppBapCallbackRespFullNakTxNumber of Callback Responses transmitted by BAP
with a Response Code of Request_Full_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.11 |
wfPppBapCallbackRespRejTxNumber of Callback Responses transmitted by BAP
with a Response Code of Request_Rejro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.12 |
wfPppBapLdQueryReqTxNumber of LinkDrop Query Requests transmitted by BAPro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.13 |
wfPppBapLdQueryRespAckTxNumber of LinkDrop Query Responses transmitted by BAP
with a Response Code of Request_Ackro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.14 |
wfPppBapLdQueryRespNakTxNumber of LinkDrop Query Responses transmitted by BAP
with a Response Code of Request_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.15 |
wfPppBapLdQueryRespFullNakTxNumber of LinkDrop Query Responses transmitted by BAP
with a Response Code of Request_Full_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.16 |
wfPppBapCallStatusIndFailTxNumber of Call_Status_Indications transmitted by BAP
with a non-zero Call Statusro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.17 |
wfPppBapCallStatusIndSuccessTxNumber of Call_Status_Indications transmitted by BAP
with a zero Call Statusro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.18 |
wfPppBapCallStatusRespTxNumber of Call_Status_Response transmitted by BAPro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.19 |
wfPppBapCallReqRxNumber of Call Requests received by BAPro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.20 |
wfPppBapCallRespAckRxNumber of Call Responses received by BAP
with a Response Code of Request_Ackro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.21 |
wfPppBapCallRespNakRxNumber of Call Responses received by BAP
with a Response Code of Request_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.22 |
wfPppBapCallRespFullNakRxNumber of Call Responses received by BAP
with a Response Code of Request_Full_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.23 |
wfPppBapCallRespRejRxNumber of Call Responses received by BAP
with a Response Code of Request_Rejro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.24 |
wfPppBapCallbackReqRxNumber of Callback Requests received by BAPro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.25 |
wfPppBapCallbackRespAckRxNumber of Callback Responses received by BAP
with a Response Code of Request_Ackro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.26 |
wfPppBapCallbackRespNakRxNumber of Callback Responses received by BAP
with a Response Code of Request_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.27 |
wfPppBapCallbackRespFullNakRxNumber of Callback Responses received by BAP
with a Response Code of Request_Full_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.28 |
wfPppBapCallbackRespRejRxNumber of Callback Responses received by BAP
with a Response Code of Request_Rejro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.29 |
wfPppBapLdQueryReqRxNumber of LinkDrop Query Requests received by BAPro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.30 |
wfPppBapLdQueryRespAckRxNumber of LinkDrop Query Responses received by BAP
with a Response Code of Request_Ackro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.31 |
wfPppBapLdQueryRespNakRxNumber of LinkDrop Query Responses received by BAP
with a Response Code of Request_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.32 |
wfPppBapLdQueryRespFullNakRxNumber of LinkDrop Query Responses received by BAP
with a Response Code of Request_Full_Nakro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.33 |
wfPppBapCallStatusIndFailRxNumber of Call_Status_Indications received by BAP
with a non-zero Call Statusro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.34 |
wfPppBapCallStatusIndSuccessRxNumber of Call_Status_Indications received by BAP
with a zero Call Statusro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.35 |
wfPppBapCallStatusRespRxNumber of Call_Status_Response received by BAPro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.36 |
wfPppBapCallReqRespDiscardRxNumber of Call_Response received by BAP with an
old identifier.ro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.37 |
wfPppBapCallbackReqRespDiscardRxNumber of Callback_Response received by BAP with an
old identifier.ro Counter .1.3.6.1.4.1.18.3.5.9.2.5.1.38 |
wfPppLineEntryper Wellfleet PPP line configuration parameters
and counters WfPppLineEntry .wfPppLineTable.1 |
wfPppLineDeleteCreate/Delete parameterrw Enumeration .wfPppLineTable.1.1 |
wfPppLineDisableEnable/Disable parameter
Open/Close events to the LCP FSMrw Enumeration .wfPppLineTable.1.2 |
wfPppLineStatePPP state variable, Not Present, Init, Down, Upro Enumeration .wfPppLineTable.1.3 |
wfPppLineLineNumberInstance identifier. This is the line number assigned
to the driver PPP is running on top ofro INTEGER .wfPppLineTable.1.4 |
wfPppLineLLIndexInstance identifier. This is the lower layer index
presented to PPP by the layer immediately below it
on the protocol stack. If the lower layer is a driver,
the index will be 0.ro INTEGER .wfPppLineTable.1.5 |
wfPppLineLcpCurrentStatethe current state of the LCP Finite State Machinero Enumeration .wfPppLineTable.1.6 |
wfPppLineRestartTimervalue for Restart timer in secondsrw INTEGER .wfPppLineTable.1.7 |
wfPppLineEchoRequestFreqvalue for Echo-Request frequency - number of seconds
between transmission of Echo-Request packetsrw INTEGER .wfPppLineTable.1.8 |
wfPppLineEchoReplyLossvalue for Echo-Reply acceptable loss - number of
unacknowledged Echo-Reply packets counted before
declaring the link downrw INTEGER .wfPppLineTable.1.9 |
wfPppLineMaxConfReqvalue for maximum Configure-Requests - number of
Configure-Request packets sent without receiving a
valid Configure-Ack, Configure-Nak or Configure-Reject
before assuming peer is unable to respondrw INTEGER .wfPppLineTable.1.10 |
wfPppLineMaxTermReqvalue for maximum Terminate-Requests - number of
Terminate-Request packets sent without receiving a
Terminate-Ack before assuming peer is unable to respondrw INTEGER .wfPppLineTable.1.11 |
wfPppLineMaxConfFailvalue for maximum configuration failure count - number of
Configure-Nak packets sent without sending a
Configure-Ack before assuming configuration is unable to
convergerw INTEGER .wfPppLineTable.1.12 |
wfPppLineMagicNumberthe Magic Number being used on this linero Counter .wfPppLineTable.1.13 |
wfPppLineMruthis is the MRU being used on the line (in both
directions)ro INTEGER .wfPppLineTable.1.14 |
wfPppLineLocalAuthProtocolthis is the authorization protocol we require our peer
to use on our side of the linkrw Enumeration .wfPppLineTable.1.15 |
wfPppLineRemoteAuthProtocolthis is the authorization protocol our peer requires us
to use on its side of the linkro Enumeration .wfPppLineTable.1.16 |
wfPppLineLocalPapIdour PAP id - our peer sends this to us in an
Authenticate-Request messagerw DisplayString (SNMPv2-TC) .wfPppLineTable.1.17 |
wfPppLineLocalPapPasswordour PAP password - our peer sends this to us in an
Authenticate-Request messagerw DisplayString (SNMPv2-TC) .wfPppLineTable.1.18 |
wfPppLineRemotePapIdour peer's PAP id - we send this to our
peer in an Authenticate-Request messagerw DisplayString (SNMPv2-TC) .wfPppLineTable.1.19 |
wfPppLineRemotePapPasswordour peer's PAP password - we send this to our
peer in an Authenticate-Request messagerw DisplayString (SNMPv2-TC) .wfPppLineTable.1.20 |
wfPppLineLQProtocolthe Link Quality protocol we want to userw Enumeration .wfPppLineTable.1.21 |
wfPppLineDisableRemoteLQRTimerenable/disable our peer's LQR timer - this allows
for one side to maintain the timer while the
other just responds to LQR packetsrw Enumeration .wfPppLineTable.1.22 |
wfPppLineCfgLQRRptPrdthis is the value in seconds between transmission
of LQR packets (Reporting-Period) - it will be the
same on both sidesrw INTEGER .wfPppLineTable.1.23 |
wfPppLineLQRRptPrdthis is the Reporting-Period, in seconds, agreed upon
during negotiation - we allow the peer to negotiate
down from our configured period, our maximum, but not
below 1 secondro INTEGER .wfPppLineTable.1.24 |
wfPppLineCfgInboundQualitythe percentage of packets sent by our peer that
we've successfully received (over the last 5 LQR
Reporting-Periods) - 100 indicates we won't tolerate
any lossrw INTEGER .wfPppLineTable.1.25 |
wfPppLineInboundQualitythe current inbound qualityro INTEGER .wfPppLineTable.1.26 |
wfPppLineCfgOutboundQualitythe percentage of packets sent by us that our
peer successfully received (over the last 5 LQR
Reporting-Periods) - 100 indicates we won't tolerate
any lossrw INTEGER .wfPppLineTable.1.27 |
wfPppLineOutboundQualitythe current inbound qualityro INTEGER .wfPppLineTable.1.28 |
wfPppLineOutLQRsthe number of Link-Quality-Report packets we've
transmittedro Counter .wfPppLineTable.1.29 |
wfPppLineInLQRsthe number of Link-Quality-Report packets we've
receivedro Counter .wfPppLineTable.1.30 |
wfPppLineChapSecretthis CHAP secret MUST be the same on both sides of
the link if CHAP is used as the Authentication
protocolrw DisplayString (SNMPv2-TC) .wfPppLineTable.1.31 |
wfPppLinePapFallbackDisableif an attempt to negotiate CHAP fails, enabling this
allows a fallback to PAPrw Enumeration .wfPppLineTable.1.32 |
wfPppLineChapLocalNameThis attribute is used to assign a local CHAP Name
which is used to inform our peer of our identity,
during WHOAMI processingrw DisplayString (SNMPv2-TC) .wfPppLineTable.1.33 |
wfPppLineChapRemoteNameThis attribute is used to store our peer's CHAP Name
which is used to learn our peer's identity,
during WHOAMI processingro DisplayString (SNMPv2-TC) .wfPppLineTable.1.34 |
wfPppLineChapPeriodicTimerTimer for periodic CHAP in seconds. A time of
0 disables Periodic CHAP. This timer value should
long enough to allow CHAP to complete one phase
before entering another.rw INTEGER .wfPppLineTable.1.35 |
wfPppLineBadPacketsThese are packets not in correct PPP formatro Counter .wfPppLineTable.1.36 |
wfPppLineLastBadPacketThis is the first 16 bytes of the last bad packet
we receivedro OCTET STRING .wfPppLineTable.1.37 |
wfPppLineLevelPktsInThis is the count of PPP link-level packets
(such as Link Control Protocol or Compression
Control Protocl) which have been received.ro Counter .wfPppLineTable.1.38 |
wfPppLineAllowPapRejectThere are some peers that don't want us asking to
be a PAP authenticator, so accept the Reject and
remove PAP from the LCP Configure-Request if this
is enabled.rw Enumeration .wfPppLineTable.1.39 |
wfPppLineActiveCctThis is the circuit number that this PPP line belongs to
For the any switched lines, this will initially be -1ro INTEGER .wfPppLineTable.1.40 |
wfPppLineCfgAsyncMapThis is the initial seed value of
Async-Control-Character-Map which will be used
for LCP negotiations with the peer.rw Gauge .wfPppLineTable.1.41 |
wfPppLineActualAsyncMapAsync-Control-Character-Map used by the link to
escape control characters in the data packet. This
is the result of LCP negotiations with the peer.ro Gauge .wfPppLineTable.1.42 |
wfPppLineAuthTimervalue for Authentication timer in secondsrw INTEGER .wfPppLineTable.1.43 |
wfPppLineConvergenceTimervalue for Convergence timer in secondsrw INTEGER .wfPppLineTable.1.44 |
wfPppLineMagicNumDisableAllows Magic Numbers to be disabled on this interface.rw Enumeration .wfPppLineTable.1.45 |
wfPppLineMyLinkDiscrvalue of Link Discriminator of this endpointrw INTEGER .wfPppLineTable.1.46 |
wfPppLinePeerLinkDiscrvalue of Link Discriminator of peer's endpointrw INTEGER .wfPppLineTable.1.47 |
wfPppLineCfgMruthis is the Configured MRU being used on the linerw INTEGER .wfPppLineTable.1.48 |
wfPppLineRfc1661ComplianceEnable/Disable parameter for RFC 1661 compliancerw Enumeration .wfPppLineTable.1.49 |
wfPppLineLqmCurrentStateIndicates whether LQM is running on the line.ro Enumeration .wfPppLineTable.1.50 |