Wellfleet-PIM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
80
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
80 total| Object Name |
|---|
wfPim OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.14.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.3.14.1 |
wfPimDeleteThis is a global parameter that creates/deletes PIM
in the box. Default is created. Users perform a set
operation on this object in order to create/delete Pim.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.1 |
wfPimDisableThis is a global parameter that enables/disables PIM
in the box. Default is enabled. Users perform a set
operation on this object in order to enable/disable Pim.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.2 |
wfPimStateThe current state of the entire PIM. This state is up
when PIM process is up and PIM global is created
and enabled. This state is down when the PIM process
is down or when PIM global is disabled. This state
is init when PIM is coming up and started to do
initialization.ro Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.3 |
wfPimInfoWarningTurn PIM log ON or OFF for PIM Info/Warning messages.
The bit position is used to represent a PIM module:
PIM_LOG_BOOTSTRAP_PROC 0x00000001 Bootstrap procedure
PIM_LOG_HELLO_PROC 0x00000002 Hello procedure
PIM_LOG_JOIN_PRUNE_PROC 0x00000004 join/prune send procedure
PIM_LOG_REGISTER_PROC 0x00000008 Registration procedure
PIM_LOG_MAINTAIN_PTE 0x00000010 Maintaining PIM rout table
PIM_LOG_ASSERT_PROC 0x00000020 Assert procedure
PIM_LOG_FORWARD_PROC 0x00000040 data forwarding/tree switching
PIM_LOG_MAIN_PROC 0x00000080 PIM Main gate processing
PIM_LOG_CCT_PROC 0x00000100 PIM Cct gate general processing
PIM_LOG_ROUTE_CHG_PROC 0x00000200 PIM Route Change processing
PIM_LOG_STARG_PTE 0x00000400 PIM (*,G) processing
PIM_LOG_TIMERS_PTE_OIF 0x00000800 PIM pte/oif timers
PIM_LOG_PIM_MTM_MSG 0x00001000 PIM-MTM signals/messages
PIM_LOG_PIM_PIM_MSG 0x00002000 PIM-PIM messages
PIM_LOG_PIM_PROTO_MSG 0x00004000 PIM protocol messages/first data
PIM_LOG_RECV_JOIN_PRUNE 0x00008000 join/prune received
PIM_LOG_UTILITIES 0x00010000 PIM utilities including timersrw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.4 |
wfPimDebugTurn PIM log ON or OFF for PIM debugging messages.
The bit position is used to represent a PIM module:
PIM_LOG_BOOTSTRAP_PROC 0x00000001 Bootstrap procedure
PIM_LOG_HELLO_PROC 0x00000002 Hello procedure
PIM_LOG_JOIN_PRUNE_PROC 0x00000004 join/prune send procedure
PIM_LOG_REGISTER_PROC 0x00000008 Registration procedure
PIM_LOG_MAINTAIN_PTE 0x00000010 Maintaining PIM rout table
PIM_LOG_ASSERT_PROC 0x00000020 Assert procedure
PIM_LOG_FORWARD_PROC 0x00000040 data forwarding/tree switching
PIM_LOG_MAIN_PROC 0x00000080 PIM Main gate processing
PIM_LOG_CCT_PROC 0x00000100 PIM Cct gate general processing
PIM_LOG_ROUTE_CHG_PROC 0x00000200 PIM Route Change processing
PIM_LOG_STARG_PTE 0x00000400 PIM (*,G) processing
PIM_LOG_TIMERS_PTE_OIF 0x00000800 PIM pte/oif timers
PIM_LOG_PIM_MTM_MSG 0x00001000 PIM-MTM signals/messages
PIM_LOG_PIM_PIM_MSG 0x00002000 PIM-PIM messages
PIM_LOG_PIM_PROTO_MSG 0x00004000 PIM protocol messages/first data
PIM_LOG_RECV_JOIN_PRUNE 0x00008000 join/prune received
PIM_LOG_UTILITIES 0x00010000 PIM utilities including timers
PIM_LOG_TI_COMMANDS 0x00020000 PIM debug option for TI ip pim_fwdrw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.5 |
wfPimTraceTurn PIM log ON or OFF for PIM trace messages. The bit
position is used to represent a PIM module:
PIM_LOG_BOOTSTRAP_PROC 0x00000001 Bootstrap procedure
PIM_LOG_HELLO_PROC 0x00000002 Hello procedure
PIM_LOG_JOIN_PRUNE_PROC 0x00000004 join/prune send procedure
PIM_LOG_REGISTER_PROC 0x00000008 Registration procedure
PIM_LOG_MAINTAIN_PTE 0x00000010 Maintaining PIM rout table
PIM_LOG_ASSERT_PROC 0x00000020 Assert procedure
PIM_LOG_FORWARD_PROC 0x00000040 data forwarding/tree switching
PIM_LOG_MAIN_PROC 0x00000080 PIM Main gate processing
PIM_LOG_CCT_PROC 0x00000100 PIM Cct gate general processing
PIM_LOG_ROUTE_CHG_PROC 0x00000200 PIM Route Change processing
PIM_LOG_STARG_PTE 0x00000400 PIM (*,G) processing
PIM_LOG_TIMERS_PTE_OIF 0x00000800 PIM pte/oif timers
PIM_LOG_PIM_MTM_MSG 0x00001000 PIM-MTM signals/messages
PIM_LOG_PIM_PIM_MSG 0x00002000 PIM-PIM messages
PIM_LOG_PIM_PROTO_MSG 0x00004000 PIM protocol messages/first data
PIM_LOG_RECV_JOIN_PRUNE 0x00008000 join/prune received
PIM_LOG_UTILITIES 0x00010000 PIM utilities including timersrw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.6 |
wfPimTotalCacheEntriesThe total number of cache entries in the box. These
are the (S,G), (*,G) and/or (*,*,RP) entriesro INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.7 |
wfPimJoinPruneIntervalThe default interval at which periodic PIM-SM Join/Prune
messages are to be sentrw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.8 |
wfPimLastHopDataThresholdDisableEnable/Disable Last Hop router to switch to SPT.
Default is enabled. If enabled, the data rate is
monitored at the last hop router connected to the
receiver. If the rate exceeds wfPimLastHopDataThreshold,
the router will setup a shortest path tree to the
source of that data. If disabled, the router will
never switch to the shortest path tree regardless of
the data rate.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.9 |
wfPimLastHopDataThresholdThe data rate from the source in bytes per second at
which the last hop router creates (S,G) state and
switches to the shortest path tree. This switch will
happen immediately when the first packet is received
if this threshold is between 0 and 64 inclusive.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.10 |
wfPimRPDataThresholdDisableEnable/Disable RP router to switch to SPT.
Default is enabled. If enabled, the data rate is
monitored at the RP responsible for the group of the
data. If the rate exceeds wfPimRPDataThreshold,
the router will setup a shortest path tree to the
source of that data. If disabled, the router will
never switch to the shortest path tree regardless of
the data rate.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.11 |
wfPimRPDataThresholdThe data rate from the source in bytes per second at
which the RP router creates (S,G) state and switches
to the shortest path tree. This switch will happen
immediately when the first packet is received if this
threshold is between 0 and 64 inclusive.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.12 |
wfPimThresholdSampleIntervalThis is the sample interval in seconds during which the
rate of the current data flow is calculated. This sampling
time is in multiples of 16. If this value entered
is not multiples of 16, it will be rounded to the
lower value of a 16 multiple.
This is used to reduce the load of calculation during
data forwarding.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.13 |
wfPimPMBREnableEnable/Disable the router to be a PIM Border Router.
Default is disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.14 |
wfPimHelloOptionGenIdDisableEnable/Disable the Bay Networks Hello Neighbor Option
in Hello packets to include a generation identifier.
Default is enabled.
By enabling this neighbor option, Bay Networks PIM
router can quickly learn whether its neighbor was
just rebooted and came back up within the Hello Holdtime.
This can be detected if the neighbor's GenId received
is different from the previous one. The rebooted
neighbor will be updated with the most recent RP-Set
information immediately and thus the network can converge
even faster in terms of Bootstrap, RP-Set consistence
and Join/Prune.
When interoperating with other vendors' PIM routers,
this option should be disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.15 |
wfPimBSRAddressThe elected Bootstrap Router IP address for PIM domain.ro IpAddress .1.3.6.1.4.1.18.3.5.3.14.1.16 |
wfPimBSRPriorityPriority for BSR - this is the priority of
the elected BSR as the result of BSR election
procedure. It may change over time when the
BSR address is switched to another router.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.17 |
wfPimBSRHoldTimeThe period at which BSR is declared down. This period
is set to (2 * wfPimCBSRInterval) + 10ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.18 |
wfPimBSRHashMaskLenHash mask length
for the elected BSR as the result of BSR election
procedure. It may change over time when the
BSR address is switched to another router.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.19 |
wfPimCBSREnableEnable/Disable router to be a Candidate BSR. Default is
disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.20 |
wfPimCBSRAddressThe Candidate Bootstrap Router IP address for PIM domain.rw IpAddress .1.3.6.1.4.1.18.3.5.3.14.1.21 |
wfPimCBSRPriorityPriority for Candidate BSR - used in election mechanism
with IP ADDRESS of BSRrw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.22 |
wfPimCBSRIntervalIf this is the elected BSR, then this is the interval
at which periodic Bootstrap (RP-Set) messages are transmitted
(multicast out) on all PIM interfaces.
This parameter is also used to determine wfPimBSRHoldTime,
the period at which BSR is declared down. It is important
all routers in a PIM domain should have this parameter
set to the same value.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.23 |
wfPimCBSRHashMaskLenThe length of the hash-mask that is used to map
a group to one of the C-RPs from RP-Set messagerw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.24 |
wfPimCRPEnableEnable/Disable router to be a Candidate RP. Default is
disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.25 |
wfPimCRPAddressThe Candidate RP IP address used to map the configured
wfPimCRPGrPrefix.rw IpAddress .1.3.6.1.4.1.18.3.5.3.14.1.26 |
wfPimCRPPriorityPriority for Candidate RP - used in hash mechanism
to determine RP for the Grouprw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.27 |
wfPimCRPGrPrefixThe string of mask-len/group address for C-RP-Advs
messages. If configured the router is considered to
be a C-RP for the configured groups.
Ex. for 238.1.1.1/255.255.255.255
this parameter should be set to 0x20ee010101rw OCTET STRING .1.3.6.1.4.1.18.3.5.3.14.1.28 |
wfPimCRPAdvIntervalThe interval at which periodic PIM-SM CRP Advertize
messages are transmitted (unicast to the elected BSR)
from a Candidate RP router.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.29 |
wfPimCRPHoldTimeThis is to tell the BSR how soon the RP entry should be
removed from the BSR's RP set table. This is set to
2.5 * wfPimCRPAdvIntervalro INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.30 |
wfPimRPRcvRegisterCacheTimeoutThe timeout value for all entries whose inbound interface
are created from receiving PIM Register packets in the
RP router. If PIM Register packet has not been received
for this period of time, the relevant forwarding cache
entry associated with this interface is deleted.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.31 |
wfPimRPRegisterDisableEnable/Disable parameter. Default is enabled.
This is used to activate a RP Register process to
efficiently handle forwarding of encapsulated PIM
Register packets. One process is created for sending
to each RP. If this is disabled, the default PIM_REGISTER
process will be used. With PIM_REGISTER forwarding, each
time we have to do 2 lookups; one for searching the RP table
for destination group, the other for RP route lookuprw Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.32 |
wfPimRegisterSuppressTimeoutThe period used to suppress sending of PIM Register
packets from the source DR when the RP is receiving data
packets natively or the RP has no downstream receivers.
This timer is triggered on the source DR by Register Stop
from RP.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.33 |
wfPimProbeTimeThe time between sending a null Register and the
Register-Suppression-Timer expiring unless it is
restarted by receiving a Register-Stop. A zero will
disable the sending of Probe (NULL Registered Packet).
If non-zero, this value has to be less than
wfPimRegisterSuppressTimeoutrw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.34 |
wfPimCiscoCompatibilityEnableEnable/Disable router to be compatible with Cisco PIM routers.
This is to cope with those portions of Cisco's implementation
that do not comply with the PIM standard. By enabling this
parameter, we work around the incompatability areas. By default
we disable this paramter so that we comply with the standard
PIM specification.rwobsolete Enumeration .1.3.6.1.4.1.18.3.5.3.14.1.35 |
wfPimRfcComplianceDisableAllows router to be compatible with those portions of
implementation by other vendors which do not comply with the
standards specified in RFC 2362 for PIM. Turn RFC2362
non-compliance on or off for different issues of compatibility :
PIM_BSR_ZERO_FRAGMENT_TAG 0x00000001 Allows fragment tag in Bootstrap messages to be zero
PIM_RP_ZERO_PREFIX_COUNT 0x00000002 Sends non-zero prefix count in RP_Adv messages
PIM_REGISTER_CHECKSUM 0x00000004 Computes register packet checksum on header and datarw INTEGER .1.3.6.1.4.1.18.3.5.3.14.1.36 |
wfPimIfTableThe (conceptual) table listing the router's PIM interfaces.
IGMP and PIM are enabled on all interfaces listed in this
table. SEQUENCE OF WfPimIfEntry .1.3.6.1.4.1.18.3.5.3.14.2 |
wfPimIfEntryAn PIM interface description WfPimIfEntry .1.3.6.1.4.1.18.3.5.3.14.2.1 |
wfPimIfDeleteCreate/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete a PIM interface.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.2.1.1 |
wfPimIfDisableEnable/Disable parameter. Default is enabled.
Users perform a set operation on this
object in order to enable/disable a PIM interface.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.2.1.2 |
wfPimIfStateThe current state of the PIM interface. This state is up
when the underlying IGMP is up and PIM global is created
and enabled. This state is down when the underlying
IGMP is down or when PIM global is disabled. This state
is init when PIM is coming up and started to do
initialization.ro Enumeration .1.3.6.1.4.1.18.3.5.3.14.2.1.3 |
wfPimIfCctThe Circuit Number that this interface runs overro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.4 |
wfPimIfIpAddressThe IP Address to which this entry's addressing information
pertainsro IpAddress .1.3.6.1.4.1.18.3.5.3.14.2.1.5 |
wfPimIfIpMaskThe network mask for the IP address of the PIM interface.ro IpAddress .1.3.6.1.4.1.18.3.5.3.14.2.1.6 |
wfPimIfHelloIntervalThe frequency at which PIM Hello messages are
transmitted on this PIM interface. Recommends a higher
number for slower speed serial lines.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.7 |
wfPimIfModeConfigure this interface for Sparse Mode or Dense Moderw Enumeration .1.3.6.1.4.1.18.3.5.3.14.2.1.8 |
wfPimIfCacheTimeOutHow long an entry should remain in the PIM cache before
being timed out and deletedrw INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.9 |
wfPimIfDefaultGlobalJoinPruneIntervalDisableIf enabled, the Join/Prune interval used on this
interface will be the one defined in pim global
wfPimJoinPruneInterval. If disabled, the interface
mib wfPimIfJoinPruneInterval will be in effect.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.2.1.10 |
wfPimIfJoinPruneIntervalThe interval at which periodic PIM-SM Join/Prune
messages are transmitted on this PIM interface. This
will only be in effect if
wfPimIfDefaultGlobalJoinPruneIntervalDisable is enabled.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.11 |
wfPimIfDownstreamIgmpRelayEnableEnable/disable support for IGMP Relay as downstream
router. By default, we disable this support.
By enabling this support, PIM router is allowed to
receive multicast data from IGMP Relay downstream,
encapsulate it within Register, and send it to RP.
If this mib is enabled for an interface, all other
PIM routers on the same physical link as this interface
should have this mib enabled for the same interface.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.2.1.12 |
wfPimIfLocalDRPriorityThe DR Election Priority option is used when people
want to have control over which router is elected as
the DR, irrespective of the address of routers on the
same LAN. This is needed on LANs where new routers
can be added and configured by different operators.
The numerically larger priority is always preferred.
The DR election priority is used only when all routers
on the LAN include this option in their Hellos.
A value of zero will disable this feature on the LAN.rw INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.13 |
wfPimIfDRThe Designated Router on this PIM interface. For point-
to-point interfaces, this object has the value 0.0.0.0.ro IpAddress .1.3.6.1.4.1.18.3.5.3.14.2.1.14 |
wfPimIfDRPriorityThe elected Designated Router priority on the LAN which
connects to this PIM interface. If this is zero, it
indicates the DR is elected using the highest ip address.
Otherwise priority mechanism is used.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.15 |
wfPimIfInHellosNumber of Pim Hello packets recievedro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.16 |
wfPimIfOutHellosNumber of Pim Hello packets sentro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.17 |
wfPimIfInPrunesThe number of prunes this circuit has recievedro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.18 |
wfPimIfOutPrunesThe number of prunes this circuit has sentro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.19 |
wfPimIfInGraftsThe number of grafts this circuit has recievedro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.20 |
wfPimIfOutGraftsThe number of grafts this circuit has sentro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.21 |
wfPimIfInCRPAdvsNumber of C-RP-Adv packets received on this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.22 |
wfPimIfOutCRPAdvsNumber of C-RP-Adv packets transmitted out of this interfacero INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.23 |
wfPimIfInRPSetsNumber of RP-Set packets received on this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.24 |
wfPimIfOutRPSetsNumber of RP-Set packets send out of this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.25 |
wfPimIfInRegistersNumber of Register messages received on this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.26 |
wfPimIfOutRegistersNumber of Register messages sent from this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.27 |
wfPimIfInRegStopNumber of Register Stop packets received on this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.28 |
wfPimIfOutRegStopNumber of Register Stop packets sent from this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.29 |
wfPimIfInJoinPrunesThe number of Join/Prunes this circuit has recievedro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.30 |
wfPimIfOutJoinPrunesThe number of Join/Prunes this circuit has sentro INTEGER .1.3.6.1.4.1.18.3.5.3.14.2.1.31 |
wfPimIfBootstrapBorderDefine whether this PIM interface is a PIM Bootstrap
Border interface or not. When set to enable, it is a
border interface and both incoming (from other PIM router)
and outgoing (from other PIM interface in the same router)
Bootstrap messages are discarded. When set to disable,
this interface follows RFC2362, i.e., accept the incoming
message and forward the outgoing message.rw Enumeration .1.3.6.1.4.1.18.3.5.3.14.2.1.32 |
wfPimNeighborTableThe (conceptual) table listing the router's PIM neighbors. SEQUENCE OF WfPimNeighborEntry .1.3.6.1.4.1.18.3.5.3.14.3 |
wfPimNeighborEntryAn entry in the Pim Neighbor table WfPimNeighborEntry .1.3.6.1.4.1.18.3.5.3.14.3.1 |
wfPimNeighborAddressThe IP address of the PIM neighbor for which this entry
contains information.ro IpAddress .1.3.6.1.4.1.18.3.5.3.14.3.1.1 |
wfPimNeighborCctThe value of Cct for the interface used to reach this
PIM neighbor.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.3.1.2 |
wfPimNeighborUpTimeThe time since this PIM neighbor (last) became a neighbor
of the local router.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.3.1.3 |
wfPimNeighborExpiryTimeThe minimum time remaining before this PIM neighbor will be
aged out.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.3.1.4 |
wfPimNeighboringRouterGenIdThe neighboring router's generation identifier. If this
id is different from before, then this neighbor was just
rebooted.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.3.1.5 |
wfPimNeighboringRouterDRPriorityThe neighboring router's local DR Priority. The
neighbor with the highest priority will be elected
as the DR on the LAN. This is only true if all
neighbors on this LAN participate in DR Priority
election. Otherwise, the highest ip address on the
LAN will be elected as the DR.ro INTEGER .1.3.6.1.4.1.18.3.5.3.14.3.1.6 |