Wellfleet-OSI-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
282
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
282 total| Object Name |
|---|
wfOsi OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.6.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.6.1 |
wfOsiDeleteThis value determines whether OSI is configured on this slot.rw Enumeration .1.3.6.1.4.1.18.3.5.6.1.1 |
wfOsiDisableThis value determines whether OSI is to startup.rw Enumeration .1.3.6.1.4.1.18.3.5.6.1.2 |
wfOsiStateThis value determines whether OSI is to startup.ro Enumeration .1.3.6.1.4.1.18.3.5.6.1.3 |
wfOsiIsisVersionThis read-only parameter identifies the version number of the
IS-IS protocol to which this node conforms to.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.6.1.4 |
wfOsiRouterTypeThis value determines whether this system is an L1-only router or
L1-L2 IS.rw Enumeration .1.3.6.1.4.1.18.3.5.6.1.5 |
wfOsiRouterIdThis value contains the system ID of this Intermediate System.
If no value is entered by the user, Site Manager should
supply a 6-byte value that will be unique (a MAC address
would work).rw OCTET STRING .1.3.6.1.4.1.18.3.5.6.1.6 |
wfOsiLoadBalThis Boolean defines whether or not we are doing load balancing
over multiple paths.rw Enumeration .1.3.6.1.4.1.18.3.5.6.1.7 |
wfOsiMaxAreasThis value defines the maximum allowable number of areas addresses
for the domain that this router exists in.rw INTEGER .1.3.6.1.4.1.18.3.5.6.1.8 |
wfOsiMaxEsThis value defines the maximum allowable number of End Systems
for the area that this router exists in.rw INTEGER .1.3.6.1.4.1.18.3.5.6.1.9 |
wfOsiMaxL1IsThis value defines the maximum allowable number of L1 Intermediate
Systems for the area that this router exists in.rw INTEGER .1.3.6.1.4.1.18.3.5.6.1.10 |
wfOsiMaxL2IsThis value defines the maximum allowable number of L2 Intermediate
Systems for the domain that this router exists in.rw INTEGER .1.3.6.1.4.1.18.3.5.6.1.11 |
wfOsiMaxExtAddrThis value defines the maximum allowable number of External Addresses
for the domain that this router exists in.
The default value of this field is 0.rw INTEGER .1.3.6.1.4.1.18.3.5.6.1.12 |
wfOsiCksumIsPdusThis value indicates whether ISIS PDUs will carry a checksum.rw Enumeration .1.3.6.1.4.1.18.3.5.6.1.13 |
wfOsiL1LspPasswordThis assigns a password such that only L1 Lsps with the matching
password will be accepted. All L1 Lsps generated
by this system will contain this string in the password option.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.6.1.14 |
wfOsiL2LspPasswordThis assigns a password such that only L2 Lsps with the matching
password will be accepted. All L2 Lsps generated
by this system will contain this string in the password option.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.6.1.15 |
wfOsiAreaAddrThis Assigns the area address for this router.
This field must be filled in.
If the user doesn't enter a value, then assign 490040.
Site Manager must force the user to enter at least a 3-byte
value for this field.rw OCTET STRING .1.3.6.1.4.1.18.3.5.6.1.16 |
wfOsiAreaAddrAlias1This Assigns the first area address alias for this router.
This field does no have to be filled in, but if the user
tries to enter a value, Site Manager must make sure that
it is at least 3-bytes in length.rw OCTET STRING .1.3.6.1.4.1.18.3.5.6.1.17 |
wfOsiAreaAddrAlias2This Assigns the second area address alias for this router.
This field does no have to be filled in, but if the user
tries to enter a value, Site Manager must make sure that
it is at least 3-bytes in length.rwobsolete OCTET STRING .1.3.6.1.4.1.18.3.5.6.1.18 |
wfOsiCorruptedLspsNumber of Corrupted Lsps Detected.ro Counter .1.3.6.1.4.1.18.3.5.6.1.19 |
wfOsiL1LspDbOverloadsNumber of times the L1 Lsp Database Overload event has
been generated.ro Counter .1.3.6.1.4.1.18.3.5.6.1.20 |
wfOsiL2LspDbOverloadsNumber of times the L2 Lsp Database Overload event has
been generated.ro Counter .1.3.6.1.4.1.18.3.5.6.1.21 |
wfOsiManAddrDroppedAreasNumber of times the Manual Address Dropped from Area event
has been generated.ro Counter .1.3.6.1.4.1.18.3.5.6.1.22 |
wfOsiSeqNumberSkipsNumber of times the Sequence Number Skipped event has
been generated.ro Counter .1.3.6.1.4.1.18.3.5.6.1.23 |
wfOsiOwnLspPurgesNumber of times the Own Lsp Purged event has
been generated.ro Counter .1.3.6.1.4.1.18.3.5.6.1.24 |
wfOsiOthLspPurgesNumber of times the Other Lsp Purged event has
been generated.ro Counter .1.3.6.1.4.1.18.3.5.6.1.25 |
wfOsiExceedMaxSeqNumsNumber of times the Attempt tp Exceed Maximum Sequence Number
event has been generated.ro Counter .1.3.6.1.4.1.18.3.5.6.1.26 |
wfOsiNearestL2IsThis is the ID of the Nearest L2 system in this area.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.1.27 |
wfOsiMaxDynEsThis is the maximum number of dynamically learned (via Hello)
End Systems allowed per slot.rw INTEGER .1.3.6.1.4.1.18.3.5.6.1.28 |
wfOsiMaxDynL1IsThis is the maximum number of dynamically learned (via Hello)
Level 1 Intermediate Systems allowed per slot.rw INTEGER .1.3.6.1.4.1.18.3.5.6.1.29 |
wfOsiMaxDynL2IsThis is the maximum number of dynamically learned (via Hello)
Level 2 Intermediate Systems allowed per slot.rw INTEGER .1.3.6.1.4.1.18.3.5.6.1.30 |
wfOsiNumDynEsAdjsNumber of Dynamic ES adjs the osi master gate
receives from the cct gate.ro Counter .1.3.6.1.4.1.18.3.5.6.1.31 |
wfOsiNumDynL1AdjsNumber of Dynamic L1 adjs the osi master gate
receives from the cct gate.ro Counter .1.3.6.1.4.1.18.3.5.6.1.32 |
wfOsiNumDynL2AdjsNumber of Dynamic L2 adjs the osi master gate
receives from the cct gate.ro Counter .1.3.6.1.4.1.18.3.5.6.1.33 |
wfOsiNumL1RoutesNumber of L1 Routes. WL 2.27.93ro Counter .1.3.6.1.4.1.18.3.5.6.1.34 |
wfOsiNumL2RoutesNumber of L2 Routes. WL 2.27.93ro Counter .1.3.6.1.4.1.18.3.5.6.1.35 |
wfOsiNumDynPtpEsAdjsNumber of Dynamic Point-to-Point ES adjs the osi master gate
receives on.ro Counter .1.3.6.1.4.1.18.3.5.6.1.36 |
wfOsiNumDynPtpIsAdjsNumber of Dynamic Point-to-Point IS adjs the osi master gate
receives on .ro Counter .1.3.6.1.4.1.18.3.5.6.1.37 |
wfOsiClnpSrcRtOptionDisableEnable/Disable processing of Source Route options in CLNP PDUs.
This is required for GOSIP v2 support. GOSIP prohibits processing
Source Routing options.rw Enumeration .1.3.6.1.4.1.18.3.5.6.1.38 |
wfOsiNumL1LspsNumber of L1 LSPs stored in database.ro Counter .1.3.6.1.4.1.18.3.5.6.1.39 |
wfOsiNumL2LspsNumber of L2 LSPs stored in database.ro Counter .1.3.6.1.4.1.18.3.5.6.1.40 |
wfOsiFletchRelaxedEnableEnable/Disable whether non-standard Fletcher Checksums are
allowed in LSP's. If enabled, a log message will be generated,
otherwise the LSP will be rejected.rw Enumeration .1.3.6.1.4.1.18.3.5.6.1.41 |
wfOsiStaticRouteTableThis table contains all the static routes for this system. SEQUENCE OF WfOsiStaticRouteEntry .1.3.6.1.4.1.18.3.5.6.2 |
wfOsiStaticRouteEntryThis is the Static Route Entry for the Static Route Table. WfOsiStaticRouteEntry .1.3.6.1.4.1.18.3.5.6.2.1 |
wfOsiStaticRouteDeleteCreate/Delete parameter for Osi Static Route Record.rw Enumeration .1.3.6.1.4.1.18.3.5.6.2.1.1 |
wfOsiStaticRouteDisableEnable/Disable parameter for this Static Route.rw Enumeration .1.3.6.1.4.1.18.3.5.6.2.1.2 |
wfOsiStaticRouteAddrThis specifies the address of the static route. It is also
the inst_id.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.2.1.3 |
wfOsiStaticRouteNibbleLengthThis is the length in nibbles of the static route address.
It is necessary to specify it in nibbles since the static route
may be an external address which can be specified in nibbles.rw INTEGER .1.3.6.1.4.1.18.3.5.6.2.1.4 |
wfOsiStaticRouteNextHopIsThis is the 6-octet ID of the next Hop IS that all
data destined to wfOsiStaticRouteAddr will be forwarded to.rw OCTET STRING .1.3.6.1.4.1.18.3.5.6.2.1.5 |
wfOsiStaticRouteTypeThis specifies whether the destination is an End System,
an area, or an external Domain.rw Enumeration .1.3.6.1.4.1.18.3.5.6.2.1.6 |
wfOsiStaticRouteCostThis value is the cost to get to this address.rw INTEGER .1.3.6.1.4.1.18.3.5.6.2.1.7 |
wfOsiCircuitTableThis Table contains all circuit configuration info
counters available on a per circuit basis. SEQUENCE OF WfOsiCircuitEntry .1.3.6.1.4.1.18.3.5.6.3 |
wfOsiCircuitEntryThis is the circuit entry record that appears in the
Circuit Table. WfOsiCircuitEntry .1.3.6.1.4.1.18.3.5.6.3.1 |
wfOsiCircuitDeleteThis value determines whether this circuit is configured.rw Enumeration .1.3.6.1.4.1.18.3.5.6.3.1.1 |
wfOsiCircuitDisableEnable/Disable parameter for this circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.6.3.1.2 |
wfOsiCircuitStateThis indicates whether the circuit state is up or down.ro Enumeration .1.3.6.1.4.1.18.3.5.6.3.1.3 |
wfOsiCircuitIdA unique value for each known circuit.ro INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.4 |
wfOsiCircuitRouterLevelThis is the level protocol that the circuit runs.
Its a bit mask to allow for some combination of
L1, L2, External, ES-IS-only.rw Enumeration .1.3.6.1.4.1.18.3.5.6.3.1.5 |
wfOsiCircuitL1DefaultMetricThis is the default cost of using this circuit for L1 traffic.rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.6 |
wfOsiCircuitL2DefaultMetricThis is the default cost of using this circuit for L2 traffic.rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.7 |
wfOsiCircuitL1DrPriorityThis is the priority for this system to become L1 designated
router on this LAN circuit.rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.8 |
wfOsiCircuitL2DrPriorityThis is the priority for this system to become L2 designated
router on this LAN circuit.rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.9 |
wfOsiCircuitIsisHelloTimerThis is the period (secs) between IIH hello transmissions.rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.10 |
wfOsiCircuitEsisHelloTimerThis is the period (secs) between ISH hello transmissions.rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.11 |
wfOsiCircuitEshConfigTimeThis is the suggested time between ESH transmissions from an
ES went in ISHs (ESCT).rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.12 |
wfOsiCircuitPasswordThis is Circuit Password for this circuit. Used to filter
out Hellos from systems without the correct password.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.6.3.1.13 |
wfOsiCircuitReceivedPktsThis is the number of pkts that have been received on this
circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.14 |
wfOsiCircuitSentPktsThis is the number of pkts sent out this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.15 |
wfOsiCircuitDroppedPktsThis is the number of pkts dropped on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.16 |
wfOsiCircuitFragmentedPdusThis is the number of pdus that had to be fragmented
when forwarded out this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.17 |
wfOsiCircuitCongestionDiscardsThis is the number of PDUs dropped because of congestion.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.18 |
wfOsiCircuitAddrUnreachDiscardsThis is the number of PDUs dropped because the destination
is unreachable.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.19 |
wfOsiCircuitAgedPduDiscardsThis is the number of PDUs dropped because of aging.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.20 |
wfOsiCircuitPduFormatErrDiscardsThis is the number of PDUs dropped because of Format Error.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.21 |
wfOsiCircuitUnsuppOptsDiscardsThis is the number of PDUs dropped because they contain
unsupported options.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.22 |
wfOsiCircuitSentErrorReportsThis is the number of error reports sent out this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.23 |
wfOsiCircuitReceivedControlPdusThis is the number of ESIS or ISIS PDUs received on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.24 |
wfOsiCircuitSentControlPdusThis is the number of ESIS or ISIS PDUs sent out this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.25 |
wfOsiCircuitStateChangesThis is the number of times the circuit goes from down to up
or from up to down.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.26 |
wfOsiCircuitAdjStateChangesThis is the number of times an adjacency off of this circuit
goes from down to up or from up to down state.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.27 |
wfOsiCircuitInitFailuresThis is the number of times this circuit fails to initialize.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.28 |
wfOsiCircuitRejectedAdjsThis is the number of Adjacencies that were rejected on
this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.29 |
wfOsiCircuitReceivedBadLspsThis is the number of bad Lsps received on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.30 |
wfOsiCircuitReceivedBadSnpsThis is the number of BAD Sequence Number Pdus received on
this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.31 |
wfOsiCircuitReceivedBadEshsThis is the number of bad ESHs received on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.32 |
wfOsiCircuitReceivedBadL1IihsThis is the number of bad L1 IIHs received on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.33 |
wfOsiCircuitReceivedBadL2IihsThis is the number of bad L2 IIHs received on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.34 |
wfOsiCircuitL1DrChangesThis is the number of times the L1 Designated Router has been
elected on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.35 |
wfOsiCircuitL2DrChangesThis is the number of times the L2 Designated Router has been
elected on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.36 |
wfOsiCircuitClnpForwardingThis shows whether forwarding is enabled over this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.37 |
wfOsiCircuitClnpDefaultLifeTimeThis is the lifetime included in clnp pdus generated by this
router (i.e. echo and echo reply pdus, error report pdus).ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.38 |
wfOsiCircuitClnpInReceivesThis is the number of CLNP pdus received from this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.39 |
wfOsiCircuitClnpInAddrErrorsThis is the number of CLNP pdus recived from this circuit
with Address format errors.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.40 |
wfOsiCircuitClnpForwPdusThis is the number of Clnp PDUs received on this circuit
that are forwarded.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.41 |
wfOsiCircuitClnpInUnknownNlpsThis is the number of Clnp PDUs received on this circuit
where the network layer addressed is unknown (Bad NLPID).ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.42 |
wfOsiCircuitClnpInDeliversThis is the number of Clnp PDUs received on this circuit
whose destination is this router.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.43 |
wfOsiCircuitClnpInUnknownUlpsThis is number of Clnp PDUs received on this circuit addressed
to this router where the upper layer is unknown.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.44 |
wfOsiCircuitClnpSegCreatesThis is the number of CLNP segments created from
pdus received on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.45 |
wfOsiCircuitClnpInOptsThis is the number of CLNP pdus received with an options
portion.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.46 |
wfOsiCircuitClnpOutOptsThis is the number of CLNP pdus sent with an options
portion.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.47 |
wfOsiCircuitEsisEshInsThis is the number of ESHs received from this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.48 |
wfOsiCircuitEsisIshOutsThis is the number of ISHs sent out this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.49 |
wfOsiCircuitEsisRduOutsThis is the number of Redirects sent out this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.50 |
wfOsiCircuitL1DesignatedRouterThis is the ID of the L1 Designated Router on this
circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.3.1.51 |
wfOsiCircuitL2DesignatedRouterThis is the ID of the L2 Designated Router on this
circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.3.1.52 |
wfOsiCircuitClnpOutEchoRepliesThis is the number of CLNP Echo Replies sent out this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.53 |
wfOsiCircuitClnpOutEchoRequestsThis is the number of Clnp Echo Requests sent out this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.54 |
wfOsiCircuitClnpInEchoRepliesThis is the number of CLNP Echo Replies received on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.55 |
wfOsiCircuitClnpInEchoRequestsThis is the number of CLNP Echo Requests recived on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.56 |
wfOsiCircuitNumDynEsAdjsThis is the number of Dynamic End System Adjacencies formed on
this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.57 |
wfOsiCircuitNumDynL1AdjsThis is the number of Dynamic Level 1 Intermediate System
Adjacencies formed on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.58 |
wfOsiCircuitNumDynL2AdjsThis is the number of Dynamic Level 2 Intermediate System
Adjacencies formed on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.59 |
wfOsiCircuitNumDynPtpIsAdjsThis is the number of Dynamic Intermediate System Point-to-Point
Adjacencies formed on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.60 |
wfOsiCircuitNumDynPtpEsAdjsThis is the number of Dynamic End System Point-to-Point
Adjaciences formed on this circuit.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.61 |
wfOsiCircuitBadIshReceivedThis is the number of bad Intermediate System Hellos
received on this circuit. These will only be received on
Point-to-Point circuits.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.62 |
wfOsiCircuitEsisIshInsThis is the number of good Intermediate System Hellos
received on this circuit. These will only be received on
Point-to-Point circuits.ro Counter .1.3.6.1.4.1.18.3.5.6.3.1.63 |
wfOsiCircuitIihHoldMultiplierThis is the multiplier value used to compute the hold time
set in the IIH PDUs transmitted from this router. Hold time
equals IIH Timer times IIH Hold Multiplier.rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.64 |
wfOsiCircuitIshHoldMultiplierThis is the multiplier value used to compute the hold time
set in the ISH PDUs transmitted from this router. Hold time
equals IIH Timer times IIH Hold Multiplier.rw INTEGER .1.3.6.1.4.1.18.3.5.6.3.1.65 |
wfOsiCircuitDisableRedirectAllow Redirects to be disabled. This is required
when operating over Frame Relay in group mode in a
partial mesh topology.rw Enumeration .1.3.6.1.4.1.18.3.5.6.3.1.66 |
wfOsiExternalAddressTableThis is the table of External Addresses for this Router. SEQUENCE OF WfOsiExternalAddressEntry .1.3.6.1.4.1.18.3.5.6.4 |
wfOsiExternalAddressEntryThis is the External Address Record for this Router. WfOsiExternalAddressEntry .1.3.6.1.4.1.18.3.5.6.4.1 |
wfOsiExtAddrDeleteThis is the Create/Delete parameter for this ExtAddr entry.rw Enumeration .1.3.6.1.4.1.18.3.5.6.4.1.1 |
wfOsiExtAddrDisableEnable/Disable parameter for this ExtAddr.rw Enumeration .1.3.6.1.4.1.18.3.5.6.4.1.2 |
wfOsiExtAddrThis is the prefix external address. It is also the inst_id.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.4.1.3 |
wfOsiExtAddrCircuitThis is the circuit to go out for this adj.ro INTEGER .1.3.6.1.4.1.18.3.5.6.4.1.4 |
wfOsiExtAddrNibbleLengthThis is the length in nibbles of the external address.rw INTEGER .1.3.6.1.4.1.18.3.5.6.4.1.5 |
wfOsiExtAddrSnpaThis is the SNPA of the neighbor on this circuit.rw OCTET STRING .1.3.6.1.4.1.18.3.5.6.4.1.6 |
wfOsiExtAddrCostThis is the external metric cost to this address.rw INTEGER .1.3.6.1.4.1.18.3.5.6.4.1.7 |
wfOsiStaticEsTableThis is the Static ES Table for this router. SEQUENCE OF WfOsiStaticEsEntry .1.3.6.1.4.1.18.3.5.6.5 |
wfOsiStaticEsEntryThis is the Static ES entry for the Static ES Table. WfOsiStaticEsEntry .1.3.6.1.4.1.18.3.5.6.5.1 |
wfOsiStaticEsDeleteThis is the Create/Delete parameter for this Static ES entry.rw Enumeration .1.3.6.1.4.1.18.3.5.6.5.1.1 |
wfOsiStaticEsDisableEnable/Disable parameter for this Static ES.rw Enumeration .1.3.6.1.4.1.18.3.5.6.5.1.2 |
wfOsiStaticEsIdThis is the ESID of the neighbor.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.5.1.3 |
wfOsiStaticEsCircuitThis is the circuit to go out for this adj.ro INTEGER .1.3.6.1.4.1.18.3.5.6.5.1.4 |
wfOsiStaticEsSnpaThis is the SNPA of the neighbor on this circuit.rw OCTET STRING .1.3.6.1.4.1.18.3.5.6.5.1.5 |
wfOsiTrafficFilterTableOSI Traffic Filters SEQUENCE OF WfOsiTrafficFilterEntry .1.3.6.1.4.1.18.3.5.6.6 |
wfOsiTrafficFilterEntryA traffic filter definition WfOsiTrafficFilterEntry .1.3.6.1.4.1.18.3.5.6.6.1 |
wfOsiTrafficFilterDeleteDefines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.6.6.1.1 |
wfOsiTrafficFilterDisableDefines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.6.6.1.2 |
wfOsiTrafficFilterStatusDefines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.6.6.1.3 |
wfOsiTrafficFilterCounterThe number of received packets that have
matched this rule.ro Counter .1.3.6.1.4.1.18.3.5.6.6.1.4 |
wfOsiTrafficFilterDefinitionThe filter rule definition.rw Opaque .1.3.6.1.4.1.18.3.5.6.6.1.5 |
wfOsiTrafficFilterReservedReserved field.ro INTEGER .1.3.6.1.4.1.18.3.5.6.6.1.6 |
wfOsiTrafficFilterCircuitThe ID of the Circuit to which the
filter is applied.ro INTEGER .1.3.6.1.4.1.18.3.5.6.6.1.7 |
wfOsiTrafficFilterRuleNumberID for the rule.ro INTEGER .1.3.6.1.4.1.18.3.5.6.6.1.8 |
wfOsiTrafficFilterFragmentFragment number - for large rules.ro INTEGER .1.3.6.1.4.1.18.3.5.6.6.1.9 |
wfOsiTrafficFilterNamename of the rule numberrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.6.6.1.10 |
wfOsiL1LspHdrTable2 u_int32's so the inst_id len is 2. SEQUENCE OF WfOsiL1LspHdrEntry .1.3.6.1.4.1.18.3.5.6.7 |
wfOsiL1LspHdrEntryA Record in the Level 1 Lsp Header Table WfOsiL1LspHdrEntry .1.3.6.1.4.1.18.3.5.6.7.1 |
wfOsiL1LspHdrLspIdLSPID = Source ID + Pseudo-node ID + LSP numberro OCTET STRING .1.3.6.1.4.1.18.3.5.6.7.1.1 |
wfOsiL1LspHdrLifetimeLsp Lifetimero INTEGER .1.3.6.1.4.1.18.3.5.6.7.1.2 |
wfOsiL1LspHdrSeqnumLsp sequence numberro INTEGER .1.3.6.1.4.1.18.3.5.6.7.1.3 |
wfOsiL1LspHdrFlagsFlags: P/ATT/LSPDBOL/IS typero OCTET STRING .1.3.6.1.4.1.18.3.5.6.7.1.4 |
wfOsiL1LspHdrCksumChecksumro OCTET STRING .1.3.6.1.4.1.18.3.5.6.7.1.5 |
wfOsiL2LspHdrTable2 u_int32's so the inst_id len is 2. SEQUENCE OF WfOsiL2LspHdrEntry .1.3.6.1.4.1.18.3.5.6.8 |
wfOsiL2LspHdrEntryA Record in the Lsp Header Table WfOsiL2LspHdrEntry .1.3.6.1.4.1.18.3.5.6.8.1 |
wfOsiL2LspHdrLspIdLSPID = Source ID + Pseudo-node ID + LSP numberro OCTET STRING .1.3.6.1.4.1.18.3.5.6.8.1.1 |
wfOsiL2LspHdrLifetimeLsp Lifetimero INTEGER .1.3.6.1.4.1.18.3.5.6.8.1.2 |
wfOsiL2LspHdrSeqnumLsp sequence numberro INTEGER .1.3.6.1.4.1.18.3.5.6.8.1.3 |
wfOsiL2LspHdrFlagsFlags: P/ATT/LSPDBOL/IS typero OCTET STRING .1.3.6.1.4.1.18.3.5.6.8.1.4 |
wfOsiL2LspHdrCksumChecksumro OCTET STRING .1.3.6.1.4.1.18.3.5.6.8.1.5 |
wfOsiDynAdjTableDynamic Adjacency Table SEQUENCE OF WfOsiDynAdjEntry .1.3.6.1.4.1.18.3.5.6.9 |
wfOsiDynAdjEntryAdjacency Table - the real index is the adjacency id WfOsiDynAdjEntry .1.3.6.1.4.1.18.3.5.6.9.1 |
wfOsiDynAdjIdIndex in the Adjacency Tablero INTEGER .1.3.6.1.4.1.18.3.5.6.9.1.1 |
wfOsiDynAdjDatabaseDatabase into which the Adjacency is stored,
1=ES, 2=Level 1 IS, 3=Level 2 IS.ro INTEGER .1.3.6.1.4.1.18.3.5.6.9.1.2 |
wfOsiDynAdjTypeThe type of adjacency. (see Osi_const.h)ro INTEGER .1.3.6.1.4.1.18.3.5.6.9.1.3 |
wfOsiDynAdjStateThe state of the adjacency. INITIALIZING, UP or FAILEDro INTEGER .1.3.6.1.4.1.18.3.5.6.9.1.4 |
wfOsiDynAdjCircuitIdA unique value for each known circuit.ro INTEGER .1.3.6.1.4.1.18.3.5.6.9.1.5 |
wfOsiDynAdjHoldTimeHold Time received from neighbor.ro INTEGER .1.3.6.1.4.1.18.3.5.6.9.1.6 |
wfOsiDynAdjPriorityPriority to become designated router. IS only.ro INTEGER .1.3.6.1.4.1.18.3.5.6.9.1.7 |
wfOsiDynAdjSnpaAddrSNAP address for neighbor.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.9.1.8 |
wfOsiDynAdjNsapAddrNeighbor address (NSAP).ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.9.1.9 |
wfOsiDynAdjLanIdLAN ID from Designated Router. IS only.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.9.1.10 |
wfOsiL1RoutesTableThis is the L1 Routes Table for this router. SEQUENCE OF WfOsiL1RouteEntry .1.3.6.1.4.1.18.3.5.6.10 |
wfOsiL1RouteEntryThis is the L1 Route entry for the Routes Table. WfOsiL1RouteEntry .1.3.6.1.4.1.18.3.5.6.10.1 |
wfOsiL1RouteIdThis is the SysID of the L1 Destination.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.10.1.1 |
wfOsiL1RoutePathSplitThis assigns a number to each equal cost path to the
destination. There can be up to 2 equal cost paths
to a destination.ro INTEGER .1.3.6.1.4.1.18.3.5.6.10.1.2 |
wfOsiL1RouteTypeThis tells what kind of a route this entry is.ro INTEGER .1.3.6.1.4.1.18.3.5.6.10.1.3 |
wfOsiL1RouteNextHopSnpaThis is the SNPA of the next hop adj for this route.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.10.1.4 |
wfOsiL1RouteNextHopIdThis is the ID of the next hop adjacency to this route.
If its just an ES then it is the 6byte System ID.
If the next HOP is an IS then it is the NET.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.10.1.5 |
wfOsiL1RouteNextHopTypeThis is the adj type of the next hop for this route.ro INTEGER .1.3.6.1.4.1.18.3.5.6.10.1.6 |
wfOsiL1RouteNextHopCircuitThis is the circuit to forward out for this route.ro INTEGER .1.3.6.1.4.1.18.3.5.6.10.1.7 |
wfOsiL1RouteDefaultMetricCostThis is the cost to from this system to this destination.ro INTEGER .1.3.6.1.4.1.18.3.5.6.10.1.8 |
wfOsiL2RoutesTableThis is the L2 Routes Table for this router. SEQUENCE OF WfOsiL2RouteEntry .1.3.6.1.4.1.18.3.5.6.11 |
wfOsiL2RouteEntryThis is the L2 Route entry for the Routes Table. WfOsiL2RouteEntry .1.3.6.1.4.1.18.3.5.6.11.1 |
wfOsiL2RouteIdThis is the SysID of the L2 Destination.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.11.1.1 |
wfOsiL2RoutePathSplitThis assigns a number to each equal cost path to the
destination. There can be up to 2 equal cost paths
to a destination.ro INTEGER .1.3.6.1.4.1.18.3.5.6.11.1.2 |
wfOsiL2RouteTypeThis tells what kind of a route this entry is.ro INTEGER .1.3.6.1.4.1.18.3.5.6.11.1.3 |
wfOsiL2RouteNextHopSnpaThis is the SNPA of the neighbor on this circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.11.1.4 |
wfOsiL2RouteNextHopIdThis is the ID of the next hop adjacency to this route.
If its just an ES then it is the 6byte System ID.
If the next HOP is an IS then it is the NET.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.11.1.5 |
wfOsiL2RouteNextHopTypeThis is the adj type of the next hop for this route.ro INTEGER .1.3.6.1.4.1.18.3.5.6.11.1.6 |
wfOsiL2RouteNextHopCircuitThis is the circuit to go out for this adj.ro INTEGER .1.3.6.1.4.1.18.3.5.6.11.1.7 |
wfOsiL2RouteDefaultMetricCostThis is the cost to from this system to this destination.ro INTEGER .1.3.6.1.4.1.18.3.5.6.11.1.8 |
wfOsiDecnetTrans OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.6.12 |
wfOsiDecnetTransDeleteThis value determines whether DECnet Phase 4 to Phase 5
Transition functions are configured.rw Enumeration .1.3.6.1.4.1.18.3.5.6.12.1 |
wfOsiDecnetTransDisableThis value determines whether DECnet Phase 4 to Phase 5
Transition functions are enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.6.12.2 |
wfOsiDecnetTransStateThis value displays the state of the DECnet Phase 4 to Phase 5
Transition function.ro Enumeration .1.3.6.1.4.1.18.3.5.6.12.3 |
wfOsiDecnetTransPhase4PktsNumber of successfully translated Phase 4 packetsro Counter .1.3.6.1.4.1.18.3.5.6.12.4 |
wfOsiDecnetTransSegFailNumber of times Phase 5 translation failed because the packet
was segmented.ro Counter .1.3.6.1.4.1.18.3.5.6.12.5 |
wfOsiDecnetTransNselFailNumber of times Phase 5 translation failed because the NSELs
were not the same.ro Counter .1.3.6.1.4.1.18.3.5.6.12.6 |
wfOsiDecnetTransUnrFailNumber of times Phase 5 failed to find a route to the
destination.ro Counter .1.3.6.1.4.1.18.3.5.6.12.7 |
wfOsiDecnetTransNumPhase4EsNumber of Phase 4 ES Adjacencies announced by the Phase 4
(DECnet IV) router.ro Counter .1.3.6.1.4.1.18.3.5.6.12.8 |
wfOsiAreaAddressTableThis is the table of Area Addresses for this Router. SEQUENCE OF WfOsiAreaAddressEntry .1.3.6.1.4.1.18.3.5.6.13 |
wfOsiAreaAddressEntryThis is the Area Address Record for this Router. WfOsiAreaAddressEntry .1.3.6.1.4.1.18.3.5.6.13.1 |
wfOsiAreaAddrDeleteThis is the Create/Delete parameter for this AreaAddr entry.rw Enumeration .1.3.6.1.4.1.18.3.5.6.13.1.1 |
wfOsiAreaAddrDisableEnable/Disable parameter for this AreaAddr.rw Enumeration .1.3.6.1.4.1.18.3.5.6.13.1.2 |
wfOsiAreaAddressThis is the prefix area address. It is also the inst_id.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.13.1.3 |
wfOsiTarpEntry OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.6.14 |
wfOsiTarpCreateThis value determines whether OSI Tarp is configured on this slot.rw Enumeration .1.3.6.1.4.1.18.3.5.6.14.1 |
wfOsiTarpEnableThis value dtermines if OSI Tarp is to startup.rw Enumeration .1.3.6.1.4.1.18.3.5.6.14.2 |
wfOsiTarpStateThis value describes the state of OSI Tarp.ro Enumeration .1.3.6.1.4.1.18.3.5.6.14.3 |
wfOsiTarpTIDThis value contains the Target Identifier
assigned to the router (Network Entity).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.6.14.4 |
wfOsiTarpOriginateThis value determines if TARP is allowed
to originate any tarp requests.rw Enumeration .1.3.6.1.4.1.18.3.5.6.14.5 |
wfOsiTarpLifetimeThis value determines what the lifetime of
of TARP packets originated by this router
will be.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.6 |
wfOsiTarpStartSeqThis value determines what the starting
sequence number of TARP packets originated
by this router will be.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.7 |
wfOsiTarpNextSeqThis value determines what the next sequence
number of TARP packets originated by this
router will be.ro INTEGER .1.3.6.1.4.1.18.3.5.6.14.8 |
wfOsiTarpTarProThis value describes what the Protocol Address
Type field within the TARP packet must be.
A value of 'FE' describes a CLNP address type.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.9 |
wfOsiTarpTDCThis value determines whether or not TARP
uses and maintains a Tarp Data Cache.rw Enumeration .1.3.6.1.4.1.18.3.5.6.14.10 |
wfOsiTarpL2TDCThis value determines whether or not TARP
uses and maintains a Level 2 Tarp Data Cache.rw Enumeration .1.3.6.1.4.1.18.3.5.6.14.11 |
wfOsiTarpT1This value configures the Tarp T1 Timer - how
many seconds to wait for a response to a Type1
Request PDU.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.12 |
wfOsiTarpT2This value configures the Tarp T2 Timer - how
many seconds to wait for a response to a Type2
Request PDU.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.13 |
wfOsiTarpT3This value configures the Tarp T3 Timer - how
many seconds to wait for a response to a Type5
Request PDU.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.14 |
wfOsiTarpT4This value configures the Tarp T4 Timer, which
is used during the Error Recovery process after
T2 expires.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.15 |
wfOsiTarpLDBTimerThis value configures the Loop Detection Buffer's
Entry Timer.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.16 |
wfOsiTarpLDBFlushThis value configures the timer that signals the
flushing of the Loop Detection Buffer.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.17 |
wfOsiTarpLDBSizeThis value specifies the maximum number of entries
the the Loop Detection Buffer can hold.rw INTEGER .1.3.6.1.4.1.18.3.5.6.14.18 |
wfOsiTarpType1RcvThis value counts the number of Type 1 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.19 |
wfOsiTarpType1XmtThis value counts the number of Type 1 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.20 |
wfOsiTarpType2RcvThis value counts the number of Type 2 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.21 |
wfOsiTarpType2XmtThis value counts the number of Type 2 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.22 |
wfOsiTarpType3RcvThis value counts the number of Type 3 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.23 |
wfOsiTarpType3XmtThis value counts the number of Type 3 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.24 |
wfOsiTarpType4RcvThis value counts the number of Type 4 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.25 |
wfOsiTarpType4XmtThis value counts the number of Type 4 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.26 |
wfOsiTarpType5RcvThis value counts the number of Type 5 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.27 |
wfOsiTarpType5XmtThis value counts the number of Type 5 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.14.28 |
wfOsiTarpCircuitTableThis table contains all of the Tarp interfaces for
this system. SEQUENCE OF WfOsiTarpCircuitEntry .1.3.6.1.4.1.18.3.5.6.15 |
wfOsiTarpCircuitEntryThis is the Tarp Interface Entry for the Tarp Interface
Table. WfOsiTarpCircuitEntry .1.3.6.1.4.1.18.3.5.6.15.1 |
wfOsiTarpCircuitCreateThis value determines if the Tarp Interface is to be created
for this OSI interface.rw Enumeration .1.3.6.1.4.1.18.3.5.6.15.1.1 |
wfOsiTarpCircuitEnableThis value determines if the Tarp Interface is to be
enabled for this OSI interface.rw Enumeration .1.3.6.1.4.1.18.3.5.6.15.1.2 |
wfOsiTarpCircuitStateThis value reflects the state of the Tarp interface.ro Enumeration .1.3.6.1.4.1.18.3.5.6.15.1.3 |
wfOsiTarpCircuitCctCircuit number for this Tarp Interface.ro INTEGER .1.3.6.1.4.1.18.3.5.6.15.1.4 |
wfOsiTarpCircuitPropagateThis value determines if this interface will propagate
transit Tarp packets out this interface.rw Enumeration .1.3.6.1.4.1.18.3.5.6.15.1.5 |
wfOsiTarpCircuitOriginateThis value determines if this interface will send out
Tarp packets originated by the router.rw Enumeration .1.3.6.1.4.1.18.3.5.6.15.1.6 |
wfOsiTarpCircuitType1RcvThis value counts the number of Type 1 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.7 |
wfOsiTarpCircuitType1XmtThis value counts the number of Type 1 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.8 |
wfOsiTarpCircuitType2RcvThis value counts the number of Type 2 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.9 |
wfOsiTarpCircuitType2XmtThis value counts the number of Type 2 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.10 |
wfOsiTarpCircuitType3RcvThis value counts the number of Type 3 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.11 |
wfOsiTarpCircuitType3XmtThis value counts the number of Type 3 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.12 |
wfOsiTarpCircuitType4RcvThis value counts the number of Type 4 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.13 |
wfOsiTarpCircuitType4XmtThis value counts the number of Type 4 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.14 |
wfOsiTarpCircuitType5RcvThis value counts the number of Type 5 Tarp packets
received by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.15 |
wfOsiTarpCircuitType5XmtThis value counts the number of Type 5 Tarp packets
transmitted by this interface.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.16 |
wfOsiTarpCircuitNoBufsThis value represents the number of times Tarp tried
to allocate a buffer but was unable.ro Counter .1.3.6.1.4.1.18.3.5.6.15.1.17 |
wfOsiTarpLDBTableTable of wfOsiTarpLDBEntry's. SEQUENCE OF WfOsiTarpLDBEntry .1.3.6.1.4.1.18.3.5.6.16 |
wfOsiTarpLDBEntryEach entry in the Loop Detection Buffer. WfOsiTarpLDBEntry .1.3.6.1.4.1.18.3.5.6.16.1 |
wfOsiTarpLDBCreateSpecifies the creation or deletion of the instance.rw Enumeration .1.3.6.1.4.1.18.3.5.6.16.1.1 |
wfOsiTarpLDBNSAPThe NSAP address for this entry.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.16.1.2 |
wfOsiTarpLDBSequenceThe sequence number for this LDB entry.ro INTEGER .1.3.6.1.4.1.18.3.5.6.16.1.3 |
wfOsiTarpLDBCurrentTimerCurrent timer for this LDB Entry.rw INTEGER .1.3.6.1.4.1.18.3.5.6.16.1.4 |
wfOsiTarpStaticAdjTableTable of wfOsiTarpStaticAdjEntry's. SEQUENCE OF WfOsiTarpStaticAdjEntry .1.3.6.1.4.1.18.3.5.6.17 |
wfOsiTarpStaticAdjEntryThis is the static adjacency record that appears
in the adjacency table. WfOsiTarpStaticAdjEntry .1.3.6.1.4.1.18.3.5.6.17.1 |
wfOsiTarpStaticAdjCreateThis value determines if this instance should be
created or deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.6.17.1.1 |
wfOsiTarpStaticAdjEnableThis value determines if the Static Adjacency should
be enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.6.17.1.2 |
wfOsiTarpStaticAdjNSAPThis specifies the address of the Static Adjacency. It
is also the instance ID.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.17.1.3 |
wfOsiTarpStaticNibbleLengthDescribes the number of nibbles in the Static NSAP
Address.rw INTEGER .1.3.6.1.4.1.18.3.5.6.17.1.4 |
wfOsiTarpIgnoreAdjTableThis table contains all the adjacency entries that
should be ignored. SEQUENCE OF WfOsiTarpIgnoreAdjEntry .1.3.6.1.4.1.18.3.5.6.18 |
wfOsiTarpIgnoreAdjEntryThis is the ignore static route entry for the
wfOsiTarpIgnoreAdj table. WfOsiTarpIgnoreAdjEntry .1.3.6.1.4.1.18.3.5.6.18.1 |
wfOsiTarpIgnoreAdjCreateSignifies this instance should be created.rw Enumeration .1.3.6.1.4.1.18.3.5.6.18.1.1 |
wfOsiTarpIgnoreAdjEnableThis value determines if this instance should be enabled
or disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.6.18.1.2 |
wfOsiTarpIgnoreAdjNSAPIdentifies the OSI Adjacency that should be ignored.ro OCTET STRING .1.3.6.1.4.1.18.3.5.6.18.1.3 |
wfOsiTarpIgnoreNibbleLengthDescribes the number of nibbles in the Static NSAP
Address for the Ignore Static Route.rw INTEGER .1.3.6.1.4.1.18.3.5.6.18.1.4 |
wfOsiGreAdjTableGre Adjacency Table SEQUENCE OF WfOsiGreAdjEntry .1.3.6.1.4.1.18.3.5.6.19 |
wfOsiGreAdjEntryGRE Adjacency Entry WfOsiGreAdjEntry .1.3.6.1.4.1.18.3.5.6.19.1 |
wfOsiGreAdjDeleteDelete/Create parameter.rw Enumeration .1.3.6.1.4.1.18.3.5.6.19.1.1 |
wfOsiGreAdjDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.5.6.19.1.2 |
wfOsiGreAdjTnlNumGRE tunnel number from GRE MIBro INTEGER .1.3.6.1.4.1.18.3.5.6.19.1.3 |
wfOsiGreAdjConnNumGRE remote tunnel connection number from GRE MIB.ro INTEGER .1.3.6.1.4.1.18.3.5.6.19.1.4 |
wfOsiGreAdjRemoteISIdThis is the Physical IP address of the Destination.rw IpAddress .1.3.6.1.4.1.18.3.5.6.19.1.5 |
wfOsiGreAdjCircuitIdCircuit number on which this link in configured.rw INTEGER .1.3.6.1.4.1.18.3.5.6.19.1.6 |