Wellfleet-Modem-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
23
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
RFC1155-SMIModem line record. SEQUENCE OF WfModemEntry .1.3.6.1.4.1.18.3.4.29.1 |
wfModemEntryAn entry in the MODEM table WfModemEntry .wfModemTable.1 |
wfModemDeleteCreate/Delete parameterrw Enumeration .wfModemTable.1.1 |
wfModemSlotInstance ID Slot, filled in by driverro INTEGER .wfModemTable.1.2 |
wfModemConnectorInstance ID Connector, filled in by the driver.ro INTEGER .wfModemTable.1.3 |
wfModemIdSwRevA textual description of the modem's
firmware version number.ro DisplayString .wfModemTable.1.4 |
wfModemIdHwRevA textual description of the revision
number of the modem daughter card.ro DisplayString .wfModemTable.1.5 |
wfModemLineStateIndicates the state of the modem.ro Enumeration .wfModemTable.1.6 |
wfModemConnectionFailReasonindicates the reason for the last failed connectionro Enumeration .wfModemTable.1.7 |
wfModemCfgFactoryDefaultsThis object indicates if factory defaults are to be loaded.
If set to enabled(1), factory defaults are loaded. If set
to disabled(2), the initialization string in
wfModemCfgInitString is sent to the modem.rw Enumeration .wfModemTable.1.8 |
wfModemCfgInitStringAn initialization string that will be sent to the modem
each time the modem is rebooted.rw DisplayString (SNMPv2-TC) .wfModemTable.1.9 |
wfModemCfgDefaultStringThe string contains AT comands for initializing the
modem every time the modem comes up, regardless of
configuration.ro DisplayString (SNMPv2-TC) .wfModemTable.1.10 |
wfModemCfgResultCodeStringThe ASCII response string returned by the modem.
Response strings will be returned in response to
last command to the modem and in response to activity
on the line.ro DisplayString (SNMPv2-TC) .wfModemTable.1.11 |
wfModemCfgStateIndicates the state of AT command processing. When a
new initialization string is to be sent to the modem,
the sender sets the state to cfgInProgress(2). After the
command has been sent to the modem, and a result code
has been returned, the state is set to
cfgResponseReturned(3). Once the sender
has received the return code, the sender sets the state
to cfgIdle(1).rw Enumeration .wfModemTable.1.12 |
wfModemCfgCountryIdentifies the country the modem is designed to operate
in. This object is not read from the modem directly.
It must be entered manually when configuring the modem.rw Enumeration .wfModemTable.1.13 |
wfModemV54LpbkEnables the operator to control, and examine the
state of, V.54 loopbacks within the modem. This object
equates to the AT&Tn command.rw Enumeration .wfModemTable.1.14 |
wfModemV54TimerDuration in seconds that a test specified in wfModemV.54Lpbk
is to execute.rw INTEGER .wfModemTable.1.15 |
wfModemV54ErrorsIndicates the number of errors reported during the last
loopback test. This count will only be updated for
loopbacks with test pattern.ro Counter .wfModemTable.1.16 |
wfModemV54RemLpbkDetectThis object controls whether or not this modem will
acknowledge V.54 Remote Loop 2 requests from a remote
Site. When ENABLED, this modem can be put into a
digital loopback from a remote site. When DISABLED,
the modem will reject requests from the remote site.rw Enumeration .wfModemTable.1.17 |
wfModemPhoneNumberContains the phone number for the modem to dial.rw DisplayString (SNMPv2-TC) .wfModemTable.1.18 |
wfModemInitStateIndictes the state of the modem initialization sequence. The state will
freeze in the state that fails when a failure is detected. Otherwise,
the state will be set to initComplete when initialization completes
successfully.ro Enumeration .wfModemTable.1.19 |
wfModemUnitResetEnables the operator to remotely reset the unit.
Using this command will cause the unit to terminate
all its connections and drop data.rw Enumeration .wfModemTable.1.20 |
wfModemTypeEnables a user to specify a modem type attached to the port
thus enabling Site Manager to put a preconfigured modem init
string in the wfModemInitString entry. The list of modems and
init strings are stored in Site Manager for flexibility. This
type can be set to Custom and a user defined string can be
entered in wfModemInitString field.rw INTEGER .wfModemTable.1.21 |