Wellfleet-MPLS-MLM-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
82
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
82 total| Object Name |
|---|
wfMplsAtm OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.9.16.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.9.16.1 |
wfMplsAtmIfConfTableMPLS ATM interface configuration table -
This tabulates the ATM interfaces within an mpls protocol group.
All interfaces are indexed according to their line number.
There is one ATM interface per MPLS LDP session, but there might
be more LDP sessions per ATM interface. SEQUENCE OF WfMplsAtmIfConfEntry .1.3.6.1.4.1.18.3.5.9.16.1.1 |
wfMplsAtmIfConfEntryMPLS ATM interface configuration entries. WfMplsAtmIfConfEntry .1.3.6.1.4.1.18.3.5.9.16.1.1.1 |
wfMplsAtmIfCreateCreate/Delete parameter. Default is created. Users modify
this object in order to create/delete MPLS ATM interfacesrw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.1.1.1 |
wfMplsAtmIfAdminStatusEnable/Disable parameter. Default is enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.1.1.2 |
wfMplsAtmIfConfLineNumberThe line number of the driver line to which the interface belongs.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.1.1.3 |
wfMplsAtmIfDebugLogMaskLog bits for debug messages. This values above can be used
separately, or OR'd together for a combination of debug levels.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.1.1.4 |
wfMplsAtmIfStatusTableMPLS ATM interface status table -
This tabulates the ATM interfaces within an mpls protocol group.
All interfaces are indexed according to their line number.
There is one ATM interface per MPLS LDP session, but there might
be multiple LDP sessions per ATM interface. SEQUENCE OF WfMplsAtmIfStatusEntry .1.3.6.1.4.1.18.3.5.9.16.1.2 |
wfMplsAtmIfStatusEntryMPLS ATM interface status entries. WfMplsAtmIfStatusEntry .1.3.6.1.4.1.18.3.5.9.16.1.2.1 |
wfMplsAtmIfOperStatusThe current state of the MPLS ATM interfacero Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.2.1.1 |
wfMplsAtmIfStatusLineNumberThe line number of the driver line to which the interface belongs.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.2.1.2 |
wfMplsAtmIfCircuitThe circuit number of the circuit to which the interface belongs.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.2.1.3 |
wfMplsAtmIfTotalSessThe total number of LDPs up running.ro Counter .1.3.6.1.4.1.18.3.5.9.16.1.2.1.4 |
wfMplsAtmIfTotalVcsThe total number of VCs either in use, or available
on this interface.ro Counter .1.3.6.1.4.1.18.3.5.9.16.1.2.1.5 |
wfMplsAtmIfAllocVcsThe number of VCs which are currently allocated for different
LDP sessions on this interface. wfMplsAtmTotalVcs minus the value
of this object results in knowning how many VCs are still available
to allocate to new LDP sessions on this interface.ro Counter .1.3.6.1.4.1.18.3.5.9.16.1.2.1.6 |
wfMplsAtmSessConfTableThis is the ATM related configuration table for every LDP session. SEQUENCE OF WfMplsAtmSessConfEntry .1.3.6.1.4.1.18.3.5.9.16.1.3 |
wfMplsAtmSessConfEntryEntry definition. WfMplsAtmSessConfEntry .1.3.6.1.4.1.18.3.5.9.16.1.3.1 |
wfMplsAtmSessDeleteCreate/delete MIB instance parameter.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.1 |
wfMplsAtmSessAdminStatusSpecifies the desired administrative state of the VCL. The up
and down states indicate that the traffic flow is enabled and
disabled respectively for the VCL.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.2 |
wfMplsAtmSessConfLineNumberUniquely identifies the interface (port) that contains the
appropriate management information. We use line number here.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.3 |
wfMplsAtmSessConfIndexLDP session index number.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.4 |
wfMplsAtmSessConfDefVclVpiThe VPI value of the default VC.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.5 |
wfMplsAtmSessConfDefVclVciThe VCI value of the default VC. It should not in the configured
VC range for any LDP session.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.6 |
wfMplsAtmSessConfVcRangeVpiThe VPI value of the VCs in this LDP session.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.7 |
wfMplsAtmSessConfVcRangeMinVciThe minimum VCI value of the configured LDP session.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.8 |
wfMplsAtmSessConfVcRangeMaxVciThe maximum VCI value of the configured LDP session.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.9 |
wfMplsAtmSessDefVclXmtPeakCellRateTransmit (Forward) Peak Cell Rate in cells/second. This specifies
the upper bound on the traffic that can be submitted on an ATM
connection. 0 means best effort peak cell rate.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.10 |
wfMplsAtmSessDefVclXmtSustainableCellRateTransmit (Forward) Sustainable Cell Rate in cells/second. This
specifies the upper bound on the conforming average rate of an
ATM connection, where 'average rate' is the number of cells
transmitted divided by the 'duration of the connection'. 0 means
best effort sustainable cell rate.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.11 |
wfMplsAtmSessDefVclXmtBurstSizeTransmit (Forward) Burst Size in cells.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.12 |
wfMplsAtmSessDefVclXmtQosClassTransmit (Forward) Quality of Service as specified in Appendix A,
Section 4 of the ATM Forum UNI Specification, Version 3.0rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.13 |
wfMplsAtmSessDefVclRcvPeakCellRateReceive (Backward) Peak Cell Rate in cells/second. This specifies
the upper bound on the traffic that can be submitted on an ATM
connection. 0 means best effort peak cell rate.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.14 |
wfMplsAtmSessDefVclRcvSustainableCellRateReceive (Backward) Sustainable Cell Rate in cells/second. This
specifies the upper bound on the conforming average rate of an
ATM connection, where 'average rate' is the number of cells
transmitted divided by the 'duration of the connection'. 0 means
best effort sustainable cell rate.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.15 |
wfMplsAtmSessDefVclRcvBurstSizeReceive (Backward) Burst Size in cells.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.16 |
wfMplsAtmSessDefVclRcvQosClassReceive (Backward) Quality of Service as specified in Appendix A,
Section 4 of the ATM Forum UNI Specification, Version 3.0rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.17 |
wfMplsAtmSessDefVclAalTypeThe type of AAL used on the VCL.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.18 |
wfMplsAtmSessDefVclAalCpcsTransmitSduSizeThe maximum AAL CPCS SDU size in octets that is supported on the
transmit direction of this VCC.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.19 |
wfMplsAtmSessDefVclAalCpcsReceiveSduSizeThe maximum AAL CPCS SDU size in octets that is supported on the
receive direction of this VCC.rw INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.3.1.20 |
wfMplsAtmSessDefVclAalEncapsTypeThe type of data encapsulation used over both AAL3/4 and
AAL5 SSCS layer. Currently, the only values supported are :
ATM_VCLENCAPS_LLCENCAPS - RFC1483
ATM_VCLENCAPS_ROUTEDPROTO - NONErw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.21 |
wfMplsAtmSessDefVclCongestionIndicationThe desired state of the Congestion Indication (CI) bit in the
payload field of each ATM cell for this VCL.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.22 |
wfMplsAtmSessDefVclCellLossPriorityThe desired state of the Cell Loss Priority (CLP) bit in the ATM
header of each cell for this VCL.rw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.23 |
wfMplsAtmSessDefVclXmtTaggingTagging forward VC messages if peak/sustainable rates exceededrw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.24 |
wfMplsAtmSessDefVclRcvTaggingTagging backward VC messages if peak/sustainable rates exceededrw Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.3.1.25 |
wfMplsAtmSessStatusTableThis is the ATM related status table for every LDP session. SEQUENCE OF WfMplsAtmSessStatusEntry .1.3.6.1.4.1.18.3.5.9.16.1.4 |
wfMplsAtmSessStatusEntryEntry definition. WfMplsAtmSessStatusEntry .1.3.6.1.4.1.18.3.5.9.16.1.4.1 |
wfMplsAtmSessOperStatusThe ATM related LDP session state.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.4.1.1 |
wfMplsAtmSessStatusLineNumberUniquely identifies the interface (port) that contains the
appropriate management information. We use line number here.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.4.1.2 |
wfMplsAtmSessStatusIndexLDP session index number.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.4.1.3 |
wfMplsAtmSessActualVcRangeVpiThe VPI value of the actually allowable VC range for
this session. The maximum VPI value cannot exceed the value allowable
by the wfAtmInterfaceMaxActiveVpiBits.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.4.1.4 |
wfMplsAtmSessActualVcRangeMinVciThe minimum VCI value of the actually allowable VC range for LDP session.
The maximum VCI value cannot exceed the value allowable by the
wfAtmInterfaceMaxActiveVciBits.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.4.1.5 |
wfMplsAtmSessActualVcRangeMaxVciThe maximum VCI value of the actually allowable VC range for LDP session.
The maximum VCI value cannot exceed the value allowable by the
wfAtmInterfaceMaxActiveVciBits.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.4.1.6 |
wfMplsAtmSessNegotiatedVcRangeVpiThe VPI value of the VCs negotiated with LDP peer for this LDP session.
The maximum VPI value cannot exceed the value allowable by the
wfAtmInterfaceMaxActiveVpiBits. -1 means it is not possible.ro INTEGER (-1..255) .1.3.6.1.4.1.18.3.5.9.16.1.4.1.7 |
wfMplsAtmSessNegotiatedVcRangeMinVciThe minimum VCI value of VCs negotiated with LDP peer for this LDP
session. The maximum VCI value cannot exceed the value allowable by the
wfAtmInterfaceMaxActiveVciBits.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.4.1.8 |
wfMplsAtmSessNegotiatedVcRangeMaxVciThe maximum VCI value of VCs negotiated with LDP peer for this LDP
session. The maximum VCI value cannot exceed the value allowable by the
wfAtmInterfaceMaxActiveVciBits.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.4.1.9 |
wfMplsAtmSessInboundInuseVcsnumber of VCs opened for inbound LSP.ro Counter .1.3.6.1.4.1.18.3.5.9.16.1.4.1.10 |
wfMplsAtmSessOutboundInuseVcsnumber of VCs opened for outbound LSP.ro Counter .1.3.6.1.4.1.18.3.5.9.16.1.4.1.11 |
wfMplsAtmVclTableRead-only per VC infomation. SEQUENCE OF WfMplsAtmVclEntry .1.3.6.1.4.1.18.3.5.9.16.1.5 |
wfMplsAtmVclEntryEntry definition. WfMplsAtmVclEntry .1.3.6.1.4.1.18.3.5.9.16.1.5.1 |
wfMplsAtmVclLineNumberUniquely identifies the interface (port) that contains the
appropriate management information. We use line number here.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.5.1.1 |
wfMplsAtmVclVpiThe VPI value of the VCL. The maximum VPI value cannot exceed the
value allowable by the wfMplsAtmInterfaceMaxActiveVpiBits.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.5.1.2 |
wfMplsAtmVclVciThe VCI value of the VCL. The maximum VCI value cannot exceed the
value allowable by the wfMplsAtmInterfaceMaxActiveVciBits.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.5.1.3 |
wfMplsAtmVclLdpIndexUniquely identifies the LDP session number in this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.5.1.4 |
wfMplsAtmVclDirectionThe direction of LSPro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.5 |
wfMplsAtmVclStateThe VC state.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.6 |
wfMplsAtmVclTypedefault VC or normal LSP VC.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.7 |
wfMplsAtmVclLastChangeThe value of MIBII's sysUpTime at the time this VCL entered its
current operational state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.18.3.5.9.16.1.5.1.8 |
wfMplsAtmVclXmtPeakCellRateTransmit (Forward) Peak Cell Rate in cells/second. This specifies
the upper bound on the traffic that can be submitted on an ATM
connection.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.9 |
wfMplsAtmVclXmtSustainableCellRateTransmit (Forward) Sustainable Cell Rate in cells/second. This
specifies the upper bound on the conforming average rate of an
ATM connection, where 'average rate' is the number of cells
transmitted divided by the 'duration of the connection'.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.10 |
wfMplsAtmVclXmtBurstSizeTransmit (Forward) Burst Size in cells.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.11 |
wfMplsAtmVclXmtQosClassTransmit (Forward) Quality of Service as specified in Appendix A,
Section 4 of the ATM Forum UNI Specification, Version 3.0ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.12 |
wfMplsAtmVclRcvPeakCellRateReceive (Backward) Peak Cell Rate in cells/second. This specifies
the upper bound on the traffic that can be submitted on an ATM
connection.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.13 |
wfMplsAtmVclRcvSustainableCellRateReceive (Backward) Sustainable Cell Rate in cells/second. This
specifies the upper bound on the conforming average rate of an
ATM connection, where 'average rate' is the number of cells
transmitted divided by the 'duration of the connection'.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.14 |
wfMplsAtmVclRcvBurstSizeReceive (Backward) Burst Size in cells.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.15 |
wfMplsAtmVclRcvQosClassReceive (Backward) Quality of Service as specified in Appendix A,
Section 4 of the ATM Forum UNI Specification, Version 3.0ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.16 |
wfMplsAtmVclAalTypeThe type of AAL used on the VCL.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.17 |
wfMplsAtmVclAalCpcsTransmitSduSizeThe maximum AAL CPCS SDU size in octets that is supported on the
transmit direction of this VCC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.5.1.18 |
wfMplsAtmVclAalCpcsReceiveSduSizeThe maximum AAL CPCS SDU size in octets that is supported on the
receive direction of this VCC.ro INTEGER .1.3.6.1.4.1.18.3.5.9.16.1.5.1.19 |
wfMplsAtmVclAalEncapsTypeThe type of data encapsulation used over both AAL3/4 and
AAL5 SSCS layer. Currently, the only values supported are :
ATM_VCLENCAPS_LLCENCAPS - RFC1483
ATM_VCLENCAPS_ROUTEDPROTO - NONEro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.20 |
wfMplsAtmVclCongestionIndicationThe desired state of the Congestion Indication (CI) bit in the
payload field of each ATM cell for this VCL.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.21 |
wfMplsAtmVclCellLossPriorityThe desired state of the Cell Loss Priority (CLP) bit in the ATM
header of each cell for this VCL.ro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.22 |
wfMplsAtmVclXmtTaggingTagging forward VC messages if peak/sustainable rates exceededro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.23 |
wfMplsAtmVclRcvTaggingTagging backward VC messages if peak/sustainable rates exceededro Enumeration .1.3.6.1.4.1.18.3.5.9.16.1.5.1.24 |