Wellfleet-MPLS-LDP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-MPLS-LDP-MIB.
53
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
IMPORTSMPLS LDP session table -
This tabulates the LDP session within an mpls protocol group.
All sessions are indexed according to the physical slot and
the associated interface circuit number and session index.
There can be more LDP sessions per L2 MPLS interface. SEQUENCE OF WfMplsLdpSessCfgEntry .1.3.6.1.4.1.18.3.5.9.15.1 |
wfMplsLdpSessActualTableMPLS LDP interface actual table -
read-only table containing LDP peer status, and
actual LDP information. SEQUENCE OF WfMplsLdpSessActualEntry .1.3.6.1.4.1.18.3.5.9.15.2 |
wfMplsLdpSessActualEntryMPLS LDP interface entries. WfMplsLdpSessActualEntry .1.3.6.1.4.1.18.3.5.9.15.2.1 |
wfMplsLdpSessActualIndexThe Session index identifies this particular LDP session on the interface.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.2.1.1 |
wfMplsLdpSessActualCircuitThe circuit number of the circuit to which the session belongs.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.2.1.2 |
wfMplsLdpSessActualStateThe current state of the MPLS LDP sessionro Enumeration .1.3.6.1.4.1.18.3.5.9.15.2.1.3 |
wfMplsLdpSessActualPeerStateThe current state of MPLS LDP session with the remote MPLS
devicero Enumeration .1.3.6.1.4.1.18.3.5.9.15.2.1.4 |
wfMplsLdpSessActualLocalIpAddressThe actual IP address that LDP used to
establish the LDP peer to peer session.ro IpAddress .1.3.6.1.4.1.18.3.5.9.15.2.1.5 |
wfMplsLdpSessActualLocalTcpPortThe actual local TCP port address that this LDP used to
establish the LDP peer to peer session.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.2.1.6 |
wfMplsLdpSessActualRemoteIpAddressThe actual remote IP address that LDP used to
establish the LDP peer to peer session.ro IpAddress .1.3.6.1.4.1.18.3.5.9.15.2.1.7 |
wfMplsLdpSessActualRemoteTcpPortThe actual TCP port that LDP used to
establish the LDP peer to peer session.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.2.1.8 |
wfMplsLdpSessActualHoldTimethe actual Hold Time that LDP used to indicate the maximum
time in seconds that may elapse between the receipt of
successive PDUs from the LSR peer.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.2.1.9 |
wfMplsLdpSessActualRoutesConfigModeIndicates whether network routes are discovered by a
routing protocol(auto) or are Manually configured(manual), see
wfMplsLdpCfgRouteTable.ro Enumeration .1.3.6.1.4.1.18.3.5.9.15.2.1.10 |
wfMplsLdpSessActualTCPConnectionRoleIndicates the TCP connection roles between the peers.ro Enumeration .1.3.6.1.4.1.18.3.5.9.15.2.1.11 |
wfMplsLdpSessActualSlotIndicates the slot on which the LDP session is running.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.2.1.12 |
wfMplsLdpCfgRouteTableMPLS LDP configured route table - SEQUENCE OF WfMplsLdpCfgRouteEntry .1.3.6.1.4.1.18.3.5.9.15.3 |
wfMplsLdpCfgRouteEntryMPLS LDP configured route entries. WfMplsLdpCfgRouteEntry .1.3.6.1.4.1.18.3.5.9.15.3.1 |
wfMplsLdpCfgRouteCreateCreate/Delete parameter. Default is created. Users modify
this object in order to create/delete MPLS LSPrw Enumeration .1.3.6.1.4.1.18.3.5.9.15.3.1.1 |
wfMplsLdpCfgRouteEnableEnable/Disable parameter. Default is enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.9.15.3.1.2 |
wfMplsLdpCfgRouteCctThe circuit munber to which the route associates with.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.3.1.3 |
wfMplsLdpCfgRouteSessIdThe session identification munber to which the route associates with.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.3.1.4 |
wfMplsLdpCfgRouteIndexThe index number of this route.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.3.1.5 |
wfMplsLdpCfgRouteDestinationThe netwrok prefix of this route.rw IpAddress .1.3.6.1.4.1.18.3.5.9.15.3.1.6 |
wfMplsLdpCfgRouteMaskThe mask of this route.rw IpAddress .1.3.6.1.4.1.18.3.5.9.15.3.1.7 |
wfMplsLdpCfgRouteStateThe current state of the MPLS LDP session.ro Enumeration .1.3.6.1.4.1.18.3.5.9.15.3.1.8 |
wfMplsLdpLibTableMPLS LDP Label Information Base table which contains LSPs that have been
set up. SEQUENCE OF WfMplsLdpLibEntry .1.3.6.1.4.1.18.3.5.9.15.4 |
wfMplsLdpLibEntryMPLS LDP Label Information Base. WfMplsLdpLibEntry .1.3.6.1.4.1.18.3.5.9.15.4.1 |
wfMplsLdpLibCctThe circuit munber to which the route associates with.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.4.1.1 |
wfMplsLdpLibSessIdThe session identification munber to which the LIB entry associates with.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.4.1.2 |
wfMplsLdpLibDestThe destnation network prefix.ro IpAddress .1.3.6.1.4.1.18.3.5.9.15.4.1.3 |
wfMplsLdpLibMidThe merge id.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.4.1.4 |
wfMplsLdpLibLabelThe label of the lsp that this LIB entry identifies.ro INTEGER .1.3.6.1.4.1.18.3.5.9.15.4.1.5 |
wfMplsLdpLibEncapsThe lsp encapsulation type.ro Enumeration .1.3.6.1.4.1.18.3.5.9.15.4.1.6 |
wfMplsLdpLibDirectionMPLS VC direction.ro Enumeration .1.3.6.1.4.1.18.3.5.9.15.4.1.7 |
wfMplsLdpLibSlotSlot on which this LSP got createdro INTEGER .1.3.6.1.4.1.18.3.5.9.15.4.1.8 |
wfMplsLdpLibIndexIndex part of instance idro INTEGER .1.3.6.1.4.1.18.3.5.9.15.4.1.9 |
wfMplsLdpSessCfgEntryMPLS LDP session entries. WfMplsLdpSessCfgEntry .wfMplsLdpSessCfgTable.1 |
wfMplsLdpSessCfgCreateCreate/Delete parameter. Default is created. Users modify
this object in order to create/delete MPLS LDP sessionsrw Enumeration .wfMplsLdpSessCfgTable.1.1 |
wfMplsLdpSessCfgEnableEnable/Disable parameter. Default is enabled.rw Enumeration .wfMplsLdpSessCfgTable.1.2 |
wfMplsLdpSessCfgSlotThe slot number this LDP session is configured on.ro INTEGER .wfMplsLdpSessCfgTable.1.3 |
wfMplsLdpSessCfgIndexThe Session index identifies this particular LDP session on an interface.ro INTEGER .wfMplsLdpSessCfgTable.1.4 |
wfMplsLdpSessCfgCircuitThe circuit number of the circuit to which the session belongs.ro INTEGER .wfMplsLdpSessCfgTable.1.5 |
wfMplsLdpSessCfgLocalIpAddressThe IP address of this MPLS device for the purpose of
establishing the LDP peer to peer session.rw IpAddress .wfMplsLdpSessCfgTable.1.6 |
wfMplsLdpSessCfgLocalTcpPortThe TCP port address of this MPLS device for the purpose of
establishing the LDP peer to peer session.rw INTEGER .wfMplsLdpSessCfgTable.1.7 |
wfMplsLdpSessCfgRemoteIpAddressThe IP address of the remote MPLS device for the purpose of
establishing the LDP peer to peer session.rw IpAddress .wfMplsLdpSessCfgTable.1.8 |
wfMplsLdpSessCfgRemoteTcpPortThe TCP port of the remote MPLS device for the purpose of
establishing the LDP peer to peer session.rw INTEGER .wfMplsLdpSessCfgTable.1.9 |
wfMplsLdpSessCfgRoutesConfigModeIndicates whether network routes should be discovered by a
routing protocol(auto) or should be Manually configured(manual), see
wfMplsLdpCfgRouteTable.rw Enumeration .wfMplsLdpSessCfgTable.1.10 |
wfMplsLdpSessCfgHoldTimethe Hold Time indicates the maximum time in seconds that may elapse
between the receipt of successive PDUs from the LSR peer.rw INTEGER .wfMplsLdpSessCfgTable.1.11 |
wfMplsLdpSessCfgProtoThe routing protocols used by MPLS.rw Enumeration .wfMplsLdpSessCfgTable.1.12 |
wfMplsLdpSessCfgAggregationEnable/Disable aggregation. Default is disabled.rw Enumeration .wfMplsLdpSessCfgTable.1.13 |
wfMplsLdpSessCfgDebugLevelDebug Levels - This attribute is used to assign the
level of DEBUG message to be logged for each LDP session.rw Enumeration .wfMplsLdpSessCfgTable.1.14 |
wfMplsLdpSessCfgReqBindRetryTimeIt indicates the maximum time in seconds that may elapse
between two consecutive request bind in case of no reply.rw INTEGER .wfMplsLdpSessCfgTable.1.15 |
wfMplsLdpSessCfgReqBindRetriesIt indicates the number of retry times.rw INTEGER .wfMplsLdpSessCfgTable.1.16 |