Wellfleet-LLC-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
98
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
98 total| Object Name |
|---|
wfLlc OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.1.6.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.1.6.1 |
wfLlcBaseDelete- Create/Delete parameter. Default is created.
- Users perform an SNMP SET operation on this
- object in order to create/delete LLC.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.1.1 |
wfLlcBaseDisable- Enable/Disable parameter. Default is disabled.
- Users perform an SNMP SET operation on this
- object in order to enable/disable LLC.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.1.2 |
wfLlcBaseState- The current state of LLC servicero Enumeration .1.3.6.1.4.1.18.3.5.1.6.1.3 |
wfLlcInterfaceTableA table that contains information about every
interface that is associated with this
LLC SEQUENCE OF WfLlcInterfaceEntry .1.3.6.1.4.1.18.3.5.1.6.2 |
wfLlcInterfaceEntryAn entry in wfLlcInterface. WfLlcInterfaceEntry .1.3.6.1.4.1.18.3.5.1.6.2.1 |
wfLlcInterfaceDelete- Create/Delete parameter. Default is created.
- Users perform an SNMP SET operation on this
- object in order to create/delete an interface.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.2.1.1 |
wfLlcInterfaceDisable-
- Enable/Disable parameter. Default is enabled.
- Users perform an SNMP SET operation on this
- object in order to enable/disable an interface.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.2.1.2 |
wfLlcInterfaceStateThe current state of the interface.ro Enumeration .1.3.6.1.4.1.18.3.5.1.6.2.1.3 |
wfLlcInterfaceCircuitThe llc1 circuit of this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.4 |
wfLlcInterfaceLlc2CctIdThe llc2 circuit number assigned for this slot, line, and llc1 cct.rw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.5 |
wfLlc1InterfaceMaxUinfoSize- Maximum number of octets in UI PDU.rw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.6 |
wfLlc1InterfaceMaxRetry- Maximum retry limit. Specifeis the
- maximum number of times that an XID
- or TEST command PDU is sent following
- the running out of the response timer
- TResponserw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.7 |
wfLlc1InterfaceTAckWait- The amount of time during which the
- LLC shall expect to receive an
- an acknowledgment to a sent unnumbered
- XID or TEST command PDU
- time in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.8 |
wfLlc2InterfaceMaxInfoSize- Max number of octets in an I Pdurw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.9 |
wfLlc2InterfaceK- The wfLlc2InterfaceK parameter is no longer used.
- It is replaced by the send window (wfLlc2InterfaceTW)
- and the receive window (wfLlc2InterfaceRW) parameters.rw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.10 |
wfLlc2InterfaceN2- Maximum number of transmissions. This specifies the
- max number of times that a PDU is sent following the
- elapse of the ..
- acknowledgment timer
- poll timer
- reject timerrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.11 |
wfLlc2InterfaceN3- Maximum number of received I PDUs before
- sending a local acknowledgment to the
- transmitterrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.12 |
wfLlc2InterfaceTAckWait- Acknowledment timer for TX window
- rotation
- time in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.13 |
wfLlc2InterfaceTReject- Reject Timer
- time in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.14 |
wfLlc2InterfaceTRemoteBusy- busy state timer
- time in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.15 |
wfLlc2InterfaceTRspAck- Local response timer for remote TX
- window rotation
- response in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.16 |
wfLlc2InterfaceTIdle- Idle timer
- in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.17 |
wfLlc2InterfaceTPollCycle- P/F bit cycle timer (link activity)
- time in secsrw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.18 |
wfLlcInterfaceMaxNumOfSap- maximum number of saps per LLC service
- Max = 255 and Min = 4rw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.19 |
wfLlcInterfaceMaxNumOfLink- Maximum number of end to end connections
- per LLC service
- Max = 5000 and Min = 4 Default:5000rw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.20 |
wfLlcInterfaceDupAddrCheck- Flag to force duplicate address check
- Default is DISABLEDrw Enumeration .1.3.6.1.4.1.18.3.5.1.6.2.1.21 |
wfLlc2InterfaceRW- Maximum number of outstanding ( = unacknowledged)
- receive I PDUs. This cannot exceed 127.rw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.22 |
wfLlc2InterfaceTW- Maximum number of outstanding ( = unacknowledged)
- transmit I PDUs. This cannot exceed 127.
- This value acts as a default window size, when no other
- window size has been agreed upon through
- an XID3 exchange procedure.rw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.23 |
wfLlcInterfaceEncapsTypeThis indicates which encapsulation technique
should be used by LLC.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.2.1.24 |
wfLlcInterfaceSrbRingIdThis indicates a ring number to be used by
LLC if the encapsulation technique is SRB.
It must be unique in the SRB network.rw INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.25 |
wfLlcInterfaceFrVMask- LLC Frame Relay Virtual Mac Address Mask.
- This Mask specifies the upper 2-4 bytes of the
- destination mac address. The lower remaining
- bytes specifies the DLCI to be used.rw OCTET STRING .1.3.6.1.4.1.18.3.5.1.6.2.1.26 |
wfLlc2InterfaceDynWin- Enable/Disable dynamic window. The default is enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.2.1.27 |
wfLlcInterfaceCurrentLinksThe number of links on this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.28 |
wfLlcInterfaceHiWaterLinksThe highest number of links present at one time on this interface.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.2.1.29 |
wfLlcInterfaceHiWaterResetSetting to 2 (reset) sets HiWaterLinks to CurrentLinks.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.2.1.30 |
wfLlcInterfaceFrSapTranslationEnables SMAC SSAP translation for FR to pass multiple SMACs
over one VCrw Enumeration .1.3.6.1.4.1.18.3.5.1.6.2.1.31 |
wfLlcSapTable- llc sap table SEQUENCE OF WfLlcSapEntry .1.3.6.1.4.1.18.3.5.1.6.3 |
wfLlcSapEntryAn entry in wfLlcSapTable. WfLlcSapEntry .1.3.6.1.4.1.18.3.5.1.6.3.1 |
wfLlcSapCircuit- The llc1 circuit that this sap is onro INTEGER .1.3.6.1.4.1.18.3.5.1.6.3.1.1 |
wfLlcSapValue- Sap Valuero INTEGER .1.3.6.1.4.1.18.3.5.1.6.3.1.2 |
wfLlcLinkTable- Link table, indexed by slot, circuit, da, sa, dsap, ssap SEQUENCE OF WfLlcLinkEntry .1.3.6.1.4.1.18.3.5.1.6.4 |
wfLlcLinkEntryAn entry in wfLlcLinkTable. WfLlcLinkEntry .1.3.6.1.4.1.18.3.5.1.6.4.1 |
wfLlcLinkCircuit- The llc1 circuit that this da/sa/dsap/ssap pair is on.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.4.1.1 |
wfLlcLinkDestMadr- Destination and source Mac addressesro OCTET STRING .1.3.6.1.4.1.18.3.5.1.6.4.1.2 |
wfLlcLinkSrcMadr- source Mac addressro OCTET STRING .1.3.6.1.4.1.18.3.5.1.6.4.1.3 |
wfLlcLinkDsap- Destination and source sap'sro INTEGER .1.3.6.1.4.1.18.3.5.1.6.4.1.4 |
wfLlcLinkSsap- Source Sapro INTEGER .1.3.6.1.4.1.18.3.5.1.6.4.1.5 |
wfLlcInfoRxCnt- Counter for I Pdus rcvdro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.6 |
wfLlcInfoTxCnt- Counter for I Pdus sentro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.7 |
wfLlcInfoReXmitCnt- Counter for I Pdus re-xmittedro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.8 |
wfLlcByteInfoRxCnt- Counter for unnnumbered information
- Bytes rcvdro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.9 |
wfLlcByteInfoTxCnt- Counter for unnnumbered information
- Bytes sentro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.10 |
wfLlcRrRxCnt- Counter for RR Pdus rcvdro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.11 |
wfLlcRrTxCnt- Counter for RR Pdus Xmtedro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.12 |
wfLlcRnrRxCnt- Counter for RNR Pdus rcvdro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.13 |
wfLlcRnrTxCnt- Counter for RNR Pdus sentro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.14 |
wfLlcRejRxCnt- Counter for REJ pdus rcvdro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.15 |
wfLlcRejTxCnt- Counter for REJ pdus xmtedro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.16 |
wfLlcFrmrRxCnt- Counter for frame reject rcvdro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.17 |
wfLlcFrmrTxCnt- Counter for frame reject sentro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.18 |
wfLlcFlowDefersCnt- Counter for the number of times LLC is unable
- to xmit due to a percieved remote busy condition
- or to lack of RX window spacero Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.19 |
wfLlcWaitAckTimeouts- Counter for expiration of acknowledgment
- timersro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.20 |
wfLlcRejectTimeouts- Counter for the expiration of reject
- timeoutsro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.21 |
wfLlcPollCycleTimeouts- Counter for the expiration of P/F cycle timerro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.22 |
wfLlcStateChangeCnt- Counter for number of LLC flow state changesro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.23 |
wfLlcLastChangeReason- Counter for the most recent incrementing of the
- flow state change counterro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.24 |
wfLlcCurrentState- Current flow state of the LLC link stationro Counter .1.3.6.1.4.1.18.3.5.1.6.4.1.25 |
wfLlc2TrafficFilterTableLLC2 Traffic Filters SEQUENCE OF WfLlc2TrafficFilterEntry .1.3.6.1.4.1.18.3.5.1.6.8 |
wfLlc2TrafficFilterEntryAn entry in WfLLC2TrafficFilterTable. WfLlc2TrafficFilterEntry .1.3.6.1.4.1.18.3.5.1.6.8.1 |
wfLlc2TrafficFilterCreateDefines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.8.1.1 |
wfLlc2TrafficFilterEnableDefines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.8.1.2 |
wfLlc2TrafficFilterStatusDefines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.1.6.8.1.3 |
wfLlc2TrafficFilterCounterThe number of received packets that have
matched this rule.ro Counter .1.3.6.1.4.1.18.3.5.1.6.8.1.4 |
wfLlc2TrafficFilterDefinitionThe filter rule definition.rw OCTET STRING .1.3.6.1.4.1.18.3.5.1.6.8.1.5 |
wfLlc2TrafficFilterReservedReserved field.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.8.1.6 |
wfLlc2TrafficFilterCircuitThe ID of the Bridge Circuit to which the
filter is applied.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.8.1.7 |
wfLlc2TrafficFilterRuleNumberID for the rule.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.8.1.8 |
wfLlc2TrafficFilterFragmentFragment number - for large rules.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.8.1.9 |
wfLlc2TrafficFilterNamename of the rule numberrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.1.6.8.1.10 |
wfLlcDlciTableljd: This table defines which DLCI's a LLC interface has access
to and the appropriate mac address mappings. SEQUENCE OF WfLlcDlciEntry .1.3.6.1.4.1.18.3.5.1.6.9 |
wfLlcDlciEntryAn entry in wfLlcDlciTable. WfLlcDlciEntry .1.3.6.1.4.1.18.3.5.1.6.9.1 |
wfLlcDlciDeleteCreate/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete a DLSw Local Devicerw Enumeration .1.3.6.1.4.1.18.3.5.1.6.9.1.1 |
wfLlcDlciCctThe LLC interface circuit on which this mapping is configured.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.9.1.2 |
wfLlcDlciNumThe dlci number for this mapping.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.9.1.3 |
wfLlcDlciLocalMacThe Local MAC address of the end station to be mapped.
In-coming requests on this DLCI will be mapped to the specified
Local Mac address. Values are standard MSB Token Ring MAC addresses.rw OCTET STRING .1.3.6.1.4.1.18.3.5.1.6.9.1.4 |
wfLlcDlciRemoteMacThe Remote MAC address mapping. Out-going requests specifing
this mac address will be mapped to the DLCI.
Values are standard MSB Token Ring MAC addresses.rw OCTET STRING .1.3.6.1.4.1.18.3.5.1.6.9.1.5 |
wfLlcFrSvcTableljd: This table defines which FrSvc's a LLC interface has access
to and the appropriate mac address mappings. SEQUENCE OF WfLlcFrSvcEntry .1.3.6.1.4.1.18.3.5.1.6.10 |
wfLlcFrSvcEntryAn entry in wfLlcFrSvcTable. WfLlcFrSvcEntry .1.3.6.1.4.1.18.3.5.1.6.10.1 |
wfLlcFrSvcDeleteCreate/Delete parameter. Default is created. Users perform
an SNMP SET operation on this object in order to create/delete
a local or remote DNA to mac mappingrw Enumeration .1.3.6.1.4.1.18.3.5.1.6.10.1.1 |
wfLlcFrSvcCctThe LLC interface circuit on which this mapping is configured.ro INTEGER .1.3.6.1.4.1.18.3.5.1.6.10.1.2 |
wfLlcFrSvcMacThe local or remote MAC address of the end station to be mapped.
Values are standard MSB Token Ring MAC addresses.ro OCTET STRING .1.3.6.1.4.1.18.3.5.1.6.10.1.3 |
wfLlcFrSvcMappingTypeSpecifies weather this is remote or local mapping.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.10.1.4 |
wfLlcFrSvcX121AddrWAN address (X.121, E.164, etc.) used to register with FR
to accept an incoming call if the mapping is local, or
used to establish an SVC (initiate the call) to the configured
number if the mapping is remote.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.1.6.10.1.5 |
wfLlcFrSvcSubAddrSubaddress of type NSAP (Q.931) further qualifies numberrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.1.6.10.1.6 |
wfLlcFrSvcPlanSupported Q.931 4.3.8/4.3.10 numbering plans. Each
plan is represented by the 4 least significant bits
to align with the values stated in Q.931.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.10.1.7 |
wfLlcFrSvcTypeOfNumberSupported Q.931 4.3.8/4.3.10 types of number. Each
type is represented by a value one greater than
the values stated in Q.931.rw Enumeration .1.3.6.1.4.1.18.3.5.1.6.10.1.8 |