Wellfleet-ISDN-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
203
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
203 total| Object Name |
|---|
RFC1155-SMIISDN SYNC line record SEQUENCE OF WfModemIfEntry .1.3.6.1.4.1.18.3.5.9.8.1 |
wfIsdnMsgCtrTableISDN message counters, one entry per Digital Subscriber
Loop (DSL), maintained by the Line Manager. SEQUENCE OF WfIsdnMsgCtrEntry .1.3.6.1.4.1.18.3.5.9.8.4 |
wfIsdnMsgCtrEntryAn entry in the ISDN message counter table WfIsdnMsgCtrEntry .1.3.6.1.4.1.18.3.5.9.8.4.1 |
wfIsdnMsgCtrSlotDigital Subscriber Loop (DSL) these counters
apply torw INTEGER .1.3.6.1.4.1.18.3.5.9.8.4.1.1 |
wfIsdnMsgCtrDslIDDigital Subscriber Loop (DSL) these counters
apply torw INTEGER .1.3.6.1.4.1.18.3.5.9.8.4.1.2 |
wfIsdnMsgCallProcIndCall Proceeding Indication from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.3 |
wfIsdnMsgClearConfRelease Complete from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.4 |
wfIsdnMsgClearIndRelease Indication from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.5 |
wfIsdnMsgConnectIndConnect Indication from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.6 |
wfIsdnMsgSetupIndSetup Indication from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.7 |
wfIsdnMsgRegisterConfRegister Confirmation from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.8 |
wfIsdnMsgMgmtIndManagement Indication from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.9 |
wfIsdnMsgDiscIndDisconnect Indication from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.10 |
wfIsdnMsgActIndActivation Indication from the driverro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.11 |
wfIsdnMsgDeactIndDeactivation Indication from the driverro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.12 |
wfIsdnMsgConnectConfConnect Acknowledge from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.13 |
wfIsdnMsgAlertReqAlert Request to the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.14 |
wfIsdnMsgCallProcReqCall Proceeding Request to the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.15 |
wfIsdnMsgClearReqClear Request to the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.16 |
wfIsdnMsgConnectReqConnect Request to the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.17 |
wfIsdnMsgSetupReqSetup Request to the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.18 |
wfIsdnMsgMgmtReqManagement Request to the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.19 |
wfIsdnMsgDiscReqDisconnect Request to the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.20 |
wfIsdnMsgActReqActivate Request to the driverro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.21 |
wfIsdnMsgDeactReqDeactivate Request to the driverro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.22 |
wfIsdnMsgAlertIndAlert Indication from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.23 |
wfIsdnMsgInfoIndInformation Indication from the networkro Counter .1.3.6.1.4.1.18.3.5.9.8.4.1.24 |
wfIsdnHostActionTableThis table is for debugging purposes only! It allows
Host initiated call control actions. SEQUENCE OF WfIsdnHostActionEntry .1.3.6.1.4.1.18.3.5.9.8.5 |
wfIsdnHostActionEntryAn entry in the host action table WfIsdnHostActionEntry .1.3.6.1.4.1.18.3.5.9.8.5.1 |
wfIsdnHostActSlotthe slot the interface is onro INTEGER .1.3.6.1.4.1.18.3.5.9.8.5.1.1 |
wfIsdnHostActDslIdDSL id of the interfacerw INTEGER .1.3.6.1.4.1.18.3.5.9.8.5.1.2 |
wfIsdnHostActCallIDCall IDrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.5.1.3 |
wfIsdnHostActMsgTypetype of message to be sent to call control (or ME)rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.4 |
wfIsdnHostActCalledPtyTypecalled party typerw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.5 |
wfIsdnHostActCalledPtyPlancalled party planrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.6 |
wfIsdnHostActCalledPtyNumcalled party number in ASCII digitsrw OCTET STRING .1.3.6.1.4.1.18.3.5.9.8.5.1.7 |
wfIsdnHostActCallingPtyTypecalling party typerw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.8 |
wfIsdnHostActCallingPtyPlancalling party planrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.9 |
wfIsdnHostActCallingPtyNumcalling party number in ASCII digitsrw OCTET STRING .1.3.6.1.4.1.18.3.5.9.8.5.1.10 |
wfIsdnHostActCallingPtyPrescalling party presentation indicatorrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.11 |
wfIsdnHostActChanPrefBitchannel preferred/exclusive bitrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.5.1.12 |
wfIsdnHostActChanSelectionchannel selectionrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.13 |
wfIsdnHostActCauseCodecause coderw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.14 |
wfIsdnHostActTransferCapTransfer Capability required for Bearer Cap IErw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.15 |
wfIsdnHostActCldSadTypeCalled Party Subaddress Typerw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.16 |
wfIsdnHostActCldSadNumCalled Party subaddress Max length 20 octetsrw OCTET STRING .1.3.6.1.4.1.18.3.5.9.8.5.1.17 |
wfIsdnHostActClgSadTypeCalling party subaddress Typerw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.18 |
wfIsdnHostActClgSadNumCalled Party subaddress Max length 20 octetsrw OCTET STRING .1.3.6.1.4.1.18.3.5.9.8.5.1.19 |
wfIsdnHostActCldSadPresCalled party subaddress Typerw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.20 |
wfIsdnHostActClgSadPresCalling party subaddress presentation indicationrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.5.1.21 |
wfIsdnSwitchCfgTableThis is the Switchtype Configuration for the
ISDN signaling stack. SEQUENCE OF WfIsdnSwitchCfgEntry .1.3.6.1.4.1.18.3.5.9.8.6 |
wfIsdnSwitchCfgEntryAn entry in the ISDN Switch table WfIsdnSwitchCfgEntry .1.3.6.1.4.1.18.3.5.9.8.6.1 |
wfIsdnSwitchCfgDeleteCreate / Delete Parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.6.1.1 |
wfIsdnSwitchCfgSlotSlot which has the ISDN interfacero INTEGER .1.3.6.1.4.1.18.3.5.9.8.6.1.2 |
wfIsdnSwitchCfgTypeThe Type of switch from which the ISDN
service is subscribed for this slot.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.6.1.3 |
wfIsdnSwitchTestModeenable engineering test moderw INTEGER .1.3.6.1.4.1.18.3.5.9.8.6.1.4 |
wfIsdnSwitchIncomingFilterFilter Calling address in the Incoming callrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.6.1.5 |
wfIsdnSwitchTraceFacilityEnable/Disable ISDN protocol stack message tracing
facility - when this is enabled, all messages exchanged
between Layer 2 and Layer 3 ISDN entities will be
captured to the event log as TRACE messagesrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.6.1.6 |
wfIsdnSwitchScreenedCallsNumber of incoming calls ignored because of screening, ie.
the Calling Party number was not in the list of approved
numbersro Counter .1.3.6.1.4.1.18.3.5.9.8.6.1.7 |
wfIsdnSwitchSendingCompleteThe Sending Complete IE is required to be sent in the Setup
message indicating en-bloc sending. Enable this attribute to include
Sending Complete IE if the Switch providing ISDN service requires
it.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.6.1.8 |
wfIsdnSwitchGlobalRateAdaptionGlobal Rate Adaption, If this value is configured request
the configured Rate adpation when establishing connection.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.6.1.9 |
wfIsdnSwitchX25DEnable this attribute to support the X25 over ISDN D
channel feature.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.6.1.10 |
wfIsdnSwitchAllowedScreeningBitsSet this attribute to the value of the screening bits
that is allowed in the incoming calling number IE. Only
a calling number with screening bits matching this
attribute will be recognised, all others will be ignored.
If this attribute is disabled, the first calling number
found will be used.rw INTEGER .1.3.6.1.4.1.18.3.5.9.8.6.1.11 |
wfIsdnSwitchPreauthTodCheckEnable this attribute to attempt to identify whether
a caller is outside of a valid TOD window using the
calling number, before accepting the call.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.6.1.12 |
wfIsdnCallInfoTableCall Information Table - contains data pertinent to a
an active call, both incoming and outgoing, indexed by
an internally generated call reference number. SEQUENCE OF WfIsdnCallInfoEntry .1.3.6.1.4.1.18.3.5.9.8.7 |
wfIsdnCallInfoEntryAn entry in the ISDN Call Info Table WfIsdnCallInfoEntry .1.3.6.1.4.1.18.3.5.9.8.7.1 |
wfIsdnCallInfoSlotThe slot this call resides onro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.1 |
wfIsdnCallInfoDslIDDigital Subscriber Loop (DSL) this call resides onro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.2 |
wfIsdnCallInfoCallIDCall ID instance identifier - numbers in the
range 0x0000 - 0x7FFF are assigned to
incoming calls, 0x8000 - 0xFFFF
are assigned to outgoing calls - this is used
as a handle to manage an active callro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.3 |
wfIsdnCallInfoBChannelB Channel this call resides onro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.4 |
wfIsdnCallInfoCallStateLine Manager Call Statero INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.5 |
wfIsdnCallInfoTransferCapTransfer Capability value from the Bearer
Capability Information Elementro Enumeration .1.3.6.1.4.1.18.3.5.9.8.7.1.6 |
wfIsdnCallInfoCalledPtyNumCalled Party Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.7.1.7 |
wfIsdnCallInfoCallingPtyNumCalling Party Numberro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.7.1.8 |
wfIsdnCallInfoDurationDuration of the call in minutesro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.9 |
wfIsdnCallInfoConnectTimeStart time of the call (HHMMSS)ro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.10 |
wfIsdnCallInfoRateAdaptionRate adaption for this call in KBPSro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.11 |
wfIsdnCallInfoCalledPtySubCalled Party Subaddressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.7.1.12 |
wfIsdnCallInfoCallingPtySubCalling Party Subaddressro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.7.1.13 |
wfIsdnCallInfoChanTypeISDN call channel type: B Channel or Multiratero Enumeration .1.3.6.1.4.1.18.3.5.9.8.7.1.14 |
wfIsdnCallInfoAggrChanCntPRI Multirate call's aggreated channel countro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.15 |
wfIsdnCallInfoTimeslotMaskTimeslots used by a PRI Multirate callro INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.16 |
wfIsdnCallInfoCctCircuit using this callrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.7.1.17 |
wfIsdnBriInterfaceTableISDN BRI D Channel MIB Record SEQUENCE OF WfIsdnBriInterfaceEntry .1.3.6.1.4.1.18.3.5.9.8.9 |
wfIsdnBriInterfaceEntryAn entry in the ISDN table WfIsdnBriInterfaceEntry .1.3.6.1.4.1.18.3.5.9.8.9.1 |
wfIsdnBriDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.1 |
wfIsdnBriDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.2 |
wfIsdnBriStateLine Driver state variable, Not Present,
Init, Down, Upro Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.3 |
wfIsdnBriSlotInstance ID Slot, filled in by driver.ro INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.4 |
wfIsdnBriConnectorInstance ID Connector, filled in by driver. For the ASN
this attribute is an encoded value and is equal to
'module'*10 + 'connector'. Where 'module' is defined in
attribute 9 and 'connector' is defined in attribute 10
of this table. For non-ASN platforms this attribute is
the physical connector number on the slot.ro INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.5 |
wfIsdnBriCctCCT number for this interface instancerw INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.6 |
wfIsdnBriDslIdThe ID of this DSL interface. This stands for 'Digital Subscriber
Loop' which is the physical link from the TE (us) to the NT
(switch).ro INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.7 |
wfIsdnBriLineNumberLine number for this line instance. This is assigned at
configuration time and uniquely identifies this linerw INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.8 |
wfIsdnBriModuleModule number for ASN platform, filled in by driver. For non-ASN
platforms this attribute will not be used.ro Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.9 |
wfIsdnBriActualConnectorActual connector number for ASN platform, filled in
by driver. For non-ASN platforms, this attribute will
not be used.ro Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.10 |
wfIsdnBriTeStateState of the S/T interface from the routers point of view. These states
correspond to those described in the CCITT I.430 recommendation and
with those described with relation to the ISAC-S.ro Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.11 |
wfIsdnBriMtuContains the largest frame size that can be received by this
interface. Anything larger than the MTU will be discarded.rw INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.12 |
wfIsdnBriBChanLoopThis allows us to put the B Channels into loopback at the physical
interface. This is usually used for Layer 1 conformance testing.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.13 |
wfIsdnBriTimer3TmoIndicates the amount of time in seconds for our T3 timer.
The T3 timer is initiated by the host (i.e. the router). The T3 timer is
started whenever the S/T interface is in a deactivated state and the host
(i.e. the Router) wishes to activate the interface. As an example, for
our application, the Router would activate the interface when there was
data to be transmitted out that interface. At the point when we try
activating the interface, the T3 timer is started. During the duration
of the T3 timer, the router in trying to activate the interface will
transmit INFO 1's out the S/T interface until either a signal is detected
(from the network) or the T3 timer expires.rw INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.14 |
wfIsdnBriTimer4TmoIndicates the amount of time in milliseconds for our T4 timer.
The T4 timer is a debounce timer which is used to shield the
upper layers from short glitches at the S/T interface. Spurious
problems of short duration will not be reported to the upper
layers until the T4 timer expires. The T4 timer is started when
leaving state F7 or F8 upon the reception of INFO 0. The corresponding
Deactivation Indication will be delivered to layer 2 only if layer 1
does not enter an active state before expiration of this timer. (Note
that a value of 0 indicates the timer is disabled).rw INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.15 |
wfIsdnBriRxOctetsNumber of octets received without errorro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.16 |
wfIsdnBriRxFramesNumber of frames received without errorro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.17 |
wfIsdnBriTxOctetsNumber of octets transmitted without errorro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.18 |
wfIsdnBriTxFramesNumber of frames transmitted without errorro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.19 |
wfIsdnBriRxErrorsTotal number of receive errorsro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.20 |
wfIsdnBriTxErrorsTotal number of transmission errorsro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.21 |
wfIsdnBriRxLackRescsNumber of times a receive packet was discarded because
there was no receive descriptor available.ro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.22 |
wfIsdnBriTxLackRescsNumber of frames clipped in driver's transmit routine due to
transmit congestion.ro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.23 |
wfIsdnBriTxUnderFlowsNumber of transmission underflows, device FIFO went empty before
driver could replenish with more dataro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.24 |
wfIsdnBriTxDChanCollisionsNumber of times a collison occurred on the S-Bus transmitting
a frame greater than 32 bytes, so frame had to be retransmittedro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.25 |
wfIsdnBriRxOverFlowsNumber of receive overflows, device FIFO overflowed before the
driver was able to read/empty the FIFO.ro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.26 |
wfIsdnBriRxTooLongFramesNumber of frames received which were larger than the defined MTUro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.27 |
wfIsdnBriRxBadCrcsNumber of bad receive frames caused by FCS errorsro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.28 |
wfIsdnBriRxAbortsNumber of aborted frames due to being non octet aligned (i.e seven
one's in a row received)ro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.29 |
wfIsdnBriRxReplenMissesNumber of packet buffer misses while attempting to replenish driver
receive descriptor ring.ro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.30 |
wfIsdnBriTimer3TimeoutsNumber of Timer 3 timeout's detected. This indicates the number of
times the Router tried to activate the S/T interface without success.ro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.31 |
wfIsdnBriTimer4TimeoutsNumber of Timer 4 timeout's detected. The T4 timer is started when
leaving state F7 or F8 upon the reception of INFO 0. If layer 1 does not
enter an active state before expiration of this timer, then a Deactivation
Indication will be sent to layer 2.ro Counter .1.3.6.1.4.1.18.3.5.9.8.9.1.32 |
wfIsdnBriLineTypeBRI line type can be either Multipoint (passive bus configuration with
more than one device connected) or Point-to-Point with a single device
attached.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.33 |
wfIsdnBriModeThis attribute controls the operation of the Basic Rate Interface.
DIALUP is the traditional mode of operation in which call setup
signalling is done in concert with the ISDN switch. LEASED is a
special case of ISDN in which no signalling will be done with
the switch and instead the switch is configured with nailed up
connections to specific remote ISDN termination points.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.34 |
wfIsdnBriInterfaceTypeType of ISDN interface card being used.
It can either be 'U' or 'S/T'.ro Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.35 |
wfIsdnBriNtStateState of the U interface from the routers point of view. These states
correspond to those described in the ANSI T1.601 recommendation and
with those described in relation to the IEC-Q.ro Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.36 |
wfIsdnBriTimerM4TmoIndicates the amount of time in seconds for our M4 timer.
The M4 timer is initiated by the host (i.e. the router). The M4 timer is
started whenever the host receives a wakeup signal from the U interface.
During the duration of the M4 timer, the router in trying to activate the
interface will respond with a TN signal followed with SN1 (optional) signal.
The router will then receive SL1 from the U interface followed with SL2.
Upon reception of SL2 signal, the router will respond with SN2. At this
point the timer is stopped if it has not expired yet.rw INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.37 |
wfIsdnBriTimerM6TmoIndicates the amount of time in milliseconds for our M6 timer.
The M6 timer is initiated by the host (i.e. the router). The host has
to complete the start-up sequence for the duration of the M6 timer. If
it fails to do so, it will enter the receivereset state and remain in
that state until it receives a wakeup signal from the U interface.rw INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.38 |
wfIsdnBriX25Denable/disable the X25 over ISDN D channel feature on the interface.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.39 |
wfIsdnBriX25DTeiTypeTEI type used for the X25 over ISDN D channel feature.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.9.1.40 |
wfIsdnBriX25DTeiValueTEI value used for the X25 over ISDN D channel feature.
0 to 63 are for fixed TEI type and 127 for auto TEI typerw INTEGER .1.3.6.1.4.1.18.3.5.9.8.9.1.41 |
wfIsdnBChanInterfaceTableISDN Logical B channel MIB Record SEQUENCE OF WfIsdnBChanInterfaceEntry .1.3.6.1.4.1.18.3.5.9.8.10 |
wfIsdnBChanInterfaceEntryAn entry in the ISDN table WfIsdnBChanInterfaceEntry .1.3.6.1.4.1.18.3.5.9.8.10.1 |
wfIsdnBChanDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.10.1.1 |
wfIsdnBChanLineNumberline number for this line instancero INTEGER .1.3.6.1.4.1.18.3.5.9.8.10.1.2 |
wfIsdnBChanIndexa unique one up type number to create a listro INTEGER .1.3.6.1.4.1.18.3.5.9.8.10.1.3 |
wfIsdnBChanDisableEnable/Disable parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.10.1.4 |
wfIsdnBChanStateLine Driver state variable, Not Present,
Init, Down, Upro Enumeration .1.3.6.1.4.1.18.3.5.9.8.10.1.5 |
wfIsdnBChanCctCCT number for this interface instancerw INTEGER .1.3.6.1.4.1.18.3.5.9.8.10.1.6 |
wfIsdnBChanWanProtocolWAN protocol selection is provided via this parameter. The
supported protocols can be selected per interface.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.10.1.7 |
wfIsdnBChanBackupPoolBackup pool id containing this line driverrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.10.1.8 |
wfIsdnBChanDemandPoolDial on demand pool id containing this line driverrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.10.1.9 |
wfIsdnBChanDirectoryNumDirectory Number associated with the interfacerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.10.1.10 |
wfIsdnBChanSpidService Profile IDentifier - assigned by the Central Office on ordering
ISDN service from a switch conforming to National ISDN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.10.1.11 |
wfIsdnBChanActiveCctCCT number for this interface instancero INTEGER .1.3.6.1.4.1.18.3.5.9.8.10.1.12 |
wfIsdnBChanPriorityPriority associated with this ISDN B Channelrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.10.1.13 |
wfIsdnBchanMultilineModeThis indicates the roll the B channel plays in
a Bandwidth on Demand-Multiline Circuit. If this
is not BOD, the mode is standard.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.10.1.14 |
wfIsdnPoolTableISDN Pool MIB Record SEQUENCE OF WfIsdnPoolEntry .1.3.6.1.4.1.18.3.5.9.8.11 |
wfIsdnPoolEntryAn entry in the Pool table WfIsdnPoolEntry .1.3.6.1.4.1.18.3.5.9.8.11.1 |
wfIsdnPoolDeleteCreate/Delete parameterrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.11.1.1 |
wfIsdnPoolTypeType of Pool . Backup or Demandro Enumeration .1.3.6.1.4.1.18.3.5.9.8.11.1.2 |
wfIsdnPoolLineNumberD channel line number associated with this pool instancero INTEGER .1.3.6.1.4.1.18.3.5.9.8.11.1.3 |
wfIsdnPoolIda unique pool IDro INTEGER .1.3.6.1.4.1.18.3.5.9.8.11.1.4 |
wfIsdnPoolChannelCntNumber of Channels allocated for this Poolrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.11.1.5 |
wfIsdnPoolPriorityPriority of Lines in Poolrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.11.1.6 |
wfIsdnPoolChannelInUseNumber of Channels in use from this Pool.ro INTEGER .1.3.6.1.4.1.18.3.5.9.8.11.1.7 |
wfIsdnLocalPhoneNumTableISDN Local phone number list SEQUENCE OF WfIsdnLocalPhoneNumEntry .1.3.6.1.4.1.18.3.5.9.8.12 |
wfIsdnLocalPhoneNumEntryAn entry in table WfIsdnLocalPhoneNumEntry .1.3.6.1.4.1.18.3.5.9.8.12.1 |
wfIsdnLocalPhoneNumDeleteDelete this phone number from the listrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.12.1.1 |
wfIsdnLocalPhoneNumLineNumD Channel Line Numberro INTEGER .1.3.6.1.4.1.18.3.5.9.8.12.1.2 |
wfIsdnLocalPhoneNumIndexa unique sequetial index to create a listro INTEGER .1.3.6.1.4.1.18.3.5.9.8.12.1.3 |
wfIsdnLocalDirectoryNumDirectory Number (local phone number) assiciated with the interfacerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.12.1.4 |
wfIsdnLocalSubAddrLocal Phone Number, the sub address portionrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.12.1.5 |
wfIsdnLocalSpidService Profile IDentifier - assigned by the Central Office on ordering
ISDN service from a switch conforming to National ISDN.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.12.1.6 |
wfIsdnLocalAssignedChannelfor Swserv phone numbers, the delimiter portionrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.12.1.7 |
wfIsdnLocalSpidStatusThe status of SPID registrationro Enumeration .1.3.6.1.4.1.18.3.5.9.8.12.1.8 |
wfIsdnLocalDirectoryNumTypeFor ISDN type number, it needs type of number
UNKNOWN Type is 0, use 1 to satisfy MDL requirement
This attribute value will be ANDED with 0xFFF0 before using it.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.12.1.9 |
wfIsdnLocalDirectoryNumPlanIf Isdn and if type of number is UNKNOWN or INERNATIONAL or NATIONAL
or SUBSCRIBER then a plan number is needed. UNKNOWN is 0 ,
using 16 (0x10)to satisfy MDL requirement. We will AND this field with
0x0F before using it.rw Enumeration .1.3.6.1.4.1.18.3.5.9.8.12.1.10 |
wfIsdnSpidRetriesNumber of times the SPID registration request is sent to the ISDN switchrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.12.1.11 |
wfIsdnSpidRetryAttemptsNumber of times the SPID registration is re-envoked.rw INTEGER .1.3.6.1.4.1.18.3.5.9.8.12.1.12 |
wfIsdnSpidRetryTimerAmount of time in seconds to wait before re-envoking SPID registrationrw INTEGER .1.3.6.1.4.1.18.3.5.9.8.12.1.13 |
wfIsdnSpidResetBriWhen enabled the ISDN BRI interface is reset after all the SPID registartion
attempts fail, zero setting disables this functionality. When set to a nonzero N
the interface will be reset if the total number of BRI interface resets on this
slot is less than N.rw INTEGER .1.3.6.1.4.1.18.3.5.9.8.12.1.14 |
wfModemCommandTableModem Command String interface Entry SEQUENCE OF WfModemCommandEntry .1.3.6.1.4.1.18.3.5.9.8.13 |
wfModemCommandEntryAn entry in table WfModemCommandEntry .1.3.6.1.4.1.18.3.5.9.8.13.1 |
wfModemCommandDeleteDelete this Modem Command Entry mib recordrw Enumeration .1.3.6.1.4.1.18.3.5.9.8.13.1.1 |
wfModemCommandSlotInstance ID Slot, filled in by driverro INTEGER .1.3.6.1.4.1.18.3.5.9.8.13.1.2 |
wfModemCommandConnectorInstance ID Connector, filled in by driverro Enumeration .1.3.6.1.4.1.18.3.5.9.8.13.1.3 |
wfModemCommandStringString to be passed to the modem to configure it. Syntax of
the string is not checkedrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.9.8.13.1.4 |
wfModemIfEntryAn entry in the MODEM_IF table WfModemIfEntry .wfModemIfTable.1 |
wfModemIfDeleteCreate/Delete parameterrw Enumeration .wfModemIfTable.1.1 |
wfModemIfSlotInstance ID Slot, filled in by driverro INTEGER .wfModemIfTable.1.2 |
wfModemIfConnectStatusDial up connection statusro Enumeration .wfModemIfTable.1.3 |
wfModemIfConnectorInstance ID Connector, filled in by driverro Enumeration .wfModemIfTable.1.4 |
wfModemIfCctCCT number for this line instancero INTEGER .wfModemIfTable.1.5 |
wfModemIfConnectWhenwhen to connect linerw Enumeration .wfModemIfTable.1.6 |
wfModemIfConnectionTimeconnection wait timer interval (Seconds)rw INTEGER .wfModemIfTable.1.7 |
wfModemIfMinDurationTimemin duration time for the call (Seconds)rw INTEGER .wfModemIfTable.1.8 |
wfModemIfInactivityTimeIn the absence of data traffic, the timeout period
before a dial line is disconnected.
Value is in MINUTES (max 12 hours)rw INTEGER .wfModemIfTable.1.9 |
wfModemIfRetryDelayTimedelay to wait after retrys fails.rw Enumeration .wfModemIfTable.1.10 |
wfModemIfLineBandwidthrequested bandwidth. NULL_VAL = Default not to set bandwidthrw Enumeration .wfModemIfTable.1.11 |
wfModemIfChanAggrMaxmax number of chans to aggregate. NULL_VAL = Default not to used value.rw INTEGER .wfModemIfTable.1.12 |
wfModemIfChanAggrMinmin number of chans to aggregate. NULL_VAL = Default not to used value.rw INTEGER .wfModemIfTable.1.13 |
wfModemIfChanMgmtchannel mgmt type. NULL_VAL = no managementrw Enumeration .wfModemIfTable.1.14 |
wfModemIfRestrictTypecall restriction type.
NULL_VAL = Default not to restrict calls,
1 = Allow defined inbound call numbers onlyrw Enumeration .wfModemIfTable.1.15 |
wfModemIfDialRetryCountRedial countrw INTEGER .wfModemIfTable.1.16 |
wfModemIfRetriesNumber of retries attempted to connect a dialup linero Counter .wfModemIfTable.1.17 |
wfModemIfForceDialForce the modem to dialrw Enumeration .wfModemIfTable.1.18 |
wfModemIfForceHangupForce the modem to disconnectrw Enumeration .wfModemIfTable.1.19 |
wfModemIfBringUpHourTime of day hour to allow a line to dialrw INTEGER .wfModemIfTable.1.20 |
wfModemIfBringUpMinuteTime of day minute to allow a line to dialrw INTEGER .wfModemIfTable.1.21 |
wfModemIfTakeDownHourTime of day hour to take down a dial linerw INTEGER .wfModemIfTable.1.22 |
wfModemIfTakeDownMinuteTime of day minute to take down a dial linerw INTEGER .wfModemIfTable.1.23 |
wfModemIfConnectRmtStationNumPhone number connected to (V.25bis mode only)ro DisplayString (SNMPv2-TC) .wfModemIfTable.1.24 |
wfModemIfConnectSubAddrPhone number sub address for isdn numbersro DisplayString (SNMPv2-TC) .wfModemIfTable.1.25 |
wfModemIfMediaTypemodem typero Enumeration .wfModemIfTable.1.26 |
wfModemIfUpperLayerTimeOuttime out value for upper layer protocol initialization (seconds)rw INTEGER .wfModemIfTable.1.27 |
wfModemIfRingIndicatorRing Indicator enable/disable parameterrw Enumeration .wfModemIfTable.1.28 |
wfModemIfFsmDebugFSM Debug indicator (for V25bis or RaiseDtr FSM)rw Enumeration .wfModemIfTable.1.29 |