Wellfleet-IPXA-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for Wellfleet-IPXA-MIB.
363
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
363 total| Object Name |
|---|
RFC1155-SMIWellfleet IPX Basic System Table SEQUENCE OF WfIpxBasicSysEntry .1.3.6.1.4.1.18.3.5.5.15 |
wfIpxAdvSysTableWellfleet IPX Advanced System Table SEQUENCE OF WfIpxAdvSysEntry .1.3.6.1.4.1.18.3.5.5.16 |
wfIpxAdvSysEntryAn entry in the IPX Circ Table WfIpxAdvSysEntry .1.3.6.1.4.1.18.3.5.5.16.1 |
wfIpxAdvSysDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the IPX
advanced system group.rw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.1 |
wfIpxAdvSysInstanceThe unique identifier for the instance of IPX.ro INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.2 |
wfIpxAdvSysRoutingMethodChoose either Tick or Hop based routingrw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.3 |
wfIpxAdvSysLogFilterFilter out some log messages, Default filters out
trace messages.rw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.4 |
wfIpxAdvSysMaximumPathDeclare Maximum number of paths stored for a given destination
networkrw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.5 |
wfIpxAdvSysMaxPathSplitsA non-zero value enables load sharing between equal cost
paths with the best metric when forwarding packetsrw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.6 |
wfIpxAdvSysMaxHopsThe maximum number of hops a packet may takerw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.7 |
wfIpxAdvSysInTooManyHopsThe number of IPX packets discarded due to exceeding the
maximum hop count.ro Counter .1.3.6.1.4.1.18.3.5.5.16.1.8 |
wfIpxAdvSysInFilteredThe number of incoming IPX packets discarded due to
filtering, not including those counted in
wfIpxTrafficFilterCounterro Counter .1.3.6.1.4.1.18.3.5.5.16.1.9 |
wfIpxAdvSysInCompressDiscardsThen number of incoming IPX packets discarded due to
decompression errors.ro Counter .1.3.6.1.4.1.18.3.5.5.16.1.10 |
wfIpxAdvSysNETBIOSPacketsThe number of NETBIOS packets receivedro Counter .1.3.6.1.4.1.18.3.5.5.16.1.11 |
wfIpxAdvSysForwPacketsThe number of IPX packets forwardedro Counter .1.3.6.1.4.1.18.3.5.5.16.1.12 |
wfIpxAdvSysOutFilteredThe number of outgoing IPX packets discarded due to filteringro Counter .1.3.6.1.4.1.18.3.5.5.16.1.13 |
wfIpxAdvSysOutCompressDiscardsThe number of outgoing IPX packets discarded due to
compression errorsro Counter .1.3.6.1.4.1.18.3.5.5.16.1.14 |
wfIpxAdvSysNovellCertificationConformanceDisableenable/disable Novell certification, disable/enable Wellfleet specificsrw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.15 |
wfIpxAdvSysCircCountThe number of IPX Circuits (interfaces).ro Counter .1.3.6.1.4.1.18.3.5.5.16.1.16 |
wfIpxAdvSysCfgDestCountA value indicating the maximum destinations (networks) that
the user expects the router to learn. This is used to
pre-allocate table sizes for network tables. Changing this
value can greatly effect the memory used by IPX, however it
can also speed learning times.rw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.17 |
wfIpxAdvSysDestCountThe number of currently reachable destinations known to IPXro Counter .1.3.6.1.4.1.18.3.5.5.16.1.18 |
wfIpxAdvSysCfgServCountA value indicating the maximum services that the user
expects the router to learn. This is used to pre-allocate
table sizes for service tables. Changing this value
can greatly effect the memory used by IPX, however it
can also speed learning times.rw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.19 |
wfIpxAdvSysServCountThe number of currently reachable services known to IPXro Counter .1.3.6.1.4.1.18.3.5.5.16.1.20 |
wfIpxAdvSysCfgHostCountA value indicating the maximum next hop hosts that the user
expects the router to learn. This is used to pre-allocate
table sizes for host tables. Changing this value
can greatly effect the memory used by IPX, however it
can also speed learning times.rw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.21 |
wfIpxAdvSysHostCountThe number of currently reachable hosts known to IPXro Counter .1.3.6.1.4.1.18.3.5.5.16.1.22 |
wfIpxAdvSysAgingFrequencyThe frequency, in seconds, for aging RIP and SAP
information.rw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.23 |
wfIpxAdvSysAgingPendingFrequencyThe number of routes and services to age before pending.rw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.24 |
wfIpxAdvSysDefaultRouteEnableThis parameter indicates whether or not default route is used
for unknown networks.rw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.25 |
wfIpxAdvSysSapViaDefaultRouteEnableThis parameter indicates whether or not a SAP advertisement
can be learned from an interface if the network number advertised
in the SAP advertisement is unreachable but default route is
accessible from that interface. Note that the router may not be
compatible with other router implementations when this feature is
enabled.rw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.26 |
wfIpxAdvSysCTThe NLSP Certification Test compatibility flag.rw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.27 |
wfIpxAdvSysMibReplySlotsThe slots running IPX which should reply to MIB
Proxy requestsrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.16.1.28 |
wfIpxAdvSysGNSRespModeAlgorithm used to determine the server to choose when
responding to a Get Nearest Server Requestrw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.29 |
wfIpxAdvSysMaxNetTblSizemaximum allowed size of the network tablerw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.30 |
wfIpxAdvSysNetTblFillNotifynotify when (configured) percentage is reachedrw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.31 |
wfIpxAdvSysGlobalTrigUpdateenable/disable triggered rip/sap updates box wide.rw Enumeration .1.3.6.1.4.1.18.3.5.5.16.1.32 |
wfIpxAdvSysTrigUpdateDelayDelay before performing immediate update (10ths)rw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.33 |
wfIpxAdvSysLostRouteDelayDelay before performing lost route algorithm (10ths)rw INTEGER .1.3.6.1.4.1.18.3.5.5.16.1.34 |
wfIpxCircTableWellfleet IPX Circuit Table SEQUENCE OF WfIpxCircEntry .1.3.6.1.4.1.18.3.5.5.17 |
wfIpxCircEntryAn entry in the IPX Circuit Table WfIpxCircEntry .1.3.6.1.4.1.18.3.5.5.17.1 |
wfIpxCircDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.1 |
wfIpxCircDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.2 |
wfIpxCircStateThe current state of this entryro Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.3 |
wfIpxCircSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.4 |
wfIpxCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.5 |
wfIpxCircIfIndexThe identifier of the DP circuit to which this IPX circuit
is linked.rw INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.6 |
wfIpxCircNameThe Name of this IPX circuitrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.17.1.7 |
wfIpxCircCfgTypeThe type assigned by the user to this IPX circuit.
To enable IPXWAN negotiations on this (WAN) circuit,
set one or more of WAN_RIP, UNNUMBERED_RIP, and
WAN_NLSP.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.8 |
wfIpxCircLocalMaxPacketSizeThe maximum size (including header), in bytes that the
media supports on this DP circuit.ro INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.9 |
wfIpxCircCfgCompressStateThe configured compression state of this IPX circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.10 |
wfIpxCircCompressStateThe actual compression state on this IPX circuit.ro Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.11 |
wfIpxCircCompressSlotsThe number of compression slots available on this circuit.rw INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.12 |
wfIpxCircCompressedSentThe number of compressed packets sent.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.13 |
wfIpxCircCompressedInitSentThe number of compression initialization packets sent.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.14 |
wfIpxCircCompressedRejectsSentThe number of compressed packet rejected packets sent.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.15 |
wfIpxCircUncompressedSentThe number of uncompressed packets sent without being compressed
even though compression was turned on for this IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.16 |
wfIpxCircCompressedReceivedThe number of compressed packets received.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.17 |
wfIpxCircCompressedInitReceivedThe number of compression initialization packets received.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.18 |
wfIpxCircCompressedRejectsReceivedThe number of compressed packet rejected packets received.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.19 |
wfIpxCircUncompressedReceivedThe number of packets received without having been
compressed even though compression was turned on for
this IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.20 |
wfIpxCircMediaTypeThe media type used on this IPX circuit.ro INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.21 |
wfIpxCircCfgNetworkNumberThe IPX network number assigned by the user to this
IPX circuit.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.22 |
wfIpxCircNetworkNumberThe IPX network number of this IPX circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.23 |
wfIpxCircCommonNetworkNumberThe IPX common network number assigned to this IPX circuit.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.24 |
wfIpxCircCfgHostAddressThe IPX Host Address assigned by the user to this
IPX circuit.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.25 |
wfIpxCircHostAddressThe IPX Host Address of this IPX circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.26 |
wfIpxCircMacAddressThe IPX Host Address of this IPX circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.27 |
wfIpxCircCfgBroadcastAddressThe Broadcast Address assigned by the user to this
IPX circuit.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.28 |
wfIpxCircBroadcastAddressThe Broadcast Address of this IPX circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.29 |
wfIpxCircCfgMulticastAddressThe Multicast Address assigned by the user to this
IPX circuit.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.30 |
wfIpxCircMulticastAddressThe Multicast Address of this IPX circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.31 |
wfIpxCircStateChangesThe number of times this IPX circuit has changed state.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.32 |
wfIpxCircInitFailsThe number of times that initialization of this
circuit has failed.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.33 |
wfIpxCircDelayThe period of time, in microseconds, that it takes to
transmit one byte of data, excluding protocol headers,
to a destination on the other end of this IPX circuit,
if the IPX circuit is free of other traffic. This
value will be filled in by IPX to be either the value
configured or a computed value.ro INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.34 |
wfIpxCircThroughputThe amount of data, in bits per second, that may flow
through this IPX circuit if there is no other traffic.
This value will be filled in by IPX to be either the value
configured or a computed value.ro INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.35 |
wfIpxCircNeighRouterNameThe name of the neighboring router on a IPXWAN circuit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.17.1.36 |
wfIpxCircNeighInternalNetNumThe internal network number of the neighboring router
on an IPXWAN circuit.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.37 |
wfIpxCircCostThe cost of this interface, in ticks or hops dependant on
the wfIpxAdvSysRoutingMethod field.rw INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.38 |
wfIpxCircChecksumWhether or not to check checksums of packets coming into
this IPX circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.39 |
wfIpxCircCfgEncapsThe encapsulation assigned by the user to this
IPX circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.40 |
wfIpxCircEncapsThe encapsulation used on this IPX circuit.ro Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.41 |
wfIpxCircInTooManyHopsThe number of IPX packets discarded due to exceeding the
maximum hops count set for this IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.42 |
wfIpxCircInFilteredThe number of incoming IPX packets discarded due to
filtering, not including those counted in
wfIpxTrafficFilterCounter.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.43 |
wfIpxCircInHdrErrorsThe number of IPX packets discarded due to errors in
their headers, including any IPX packet with a size less
than the minimum of 30 bytes.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.44 |
wfIpxCircInUnknownSocketsThe number of IPX packets discarded because the
destination socket was not known.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.45 |
wfIpxCircNETBIOSPacketsThe number of NETBIOS packets received on this
IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.46 |
wfIpxCircInBadChecksumsThe number of IPX packets discarded because the
checksum was incorrect.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.47 |
wfIpxCircInDeliversThe number of IPX packets delivered locallyro Counter .1.3.6.1.4.1.18.3.5.5.17.1.48 |
wfIpxCircInDiscardsThe number of IPX packets received but discarded due to
reasons other than those accounted for by
wfIpxCircInHdrErrors, wfIpxCircInUnknownSocketsro Counter .1.3.6.1.4.1.18.3.5.5.17.1.49 |
wfIpxCircNoRoutesThe number of times no route to a destination was
found.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.50 |
wfIpxCircOutRequestsThe number of IPX packets supplied locally for
transmission.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.51 |
wfIpxCircOutMalformedRequestsThe number of IPX packets supplied locally that contained
errors in their structure.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.52 |
wfIpxCircOutDiscardsThe number of outgoing IPX packets discarded due to
reasons other than those accounted for inro Counter .1.3.6.1.4.1.18.3.5.5.17.1.53 |
wfIpxCircOutFilteredThe number of outgoing IPX packets diecarded due to
filtering.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.54 |
wfIpxCircDestCountThe number of networks known to the IPX router
from this IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.55 |
wfIpxCircServCountThe number of services known to the IPX router
from this IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.56 |
wfIpxCircHostCountThe number of hosts known to the IPX router
from this IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.57 |
wfIpxCircForwardCountThe number of forward entries in the IPX router
forwarding table for this IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.58 |
wfIpxCircTrEndStationWhether or not to do Source Routing, only valid
on token ring media.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.59 |
wfIpxCircNetbiosAcceptAccept NetBios All Networks Broadcast Packetsrw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.60 |
wfIpxCircNetbiosDeliverDeliver NetBios All Networks Broadcast Packetsrw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.61 |
wfIpxCircSMDSIndividualAddressThe SMDS individual address for this IPX circuit.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.17.1.62 |
wfIpxCircTypeThe type of the circuit. If IPXWAN was enabled on
this circuit, this attribute will indicate the
negotiated routing type.ro Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.63 |
wfIpxCircWatchdogSpoofWhether or not to do Watchdog Spoofing.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.64 |
wfIpxCircIPXOutWatchdogSpoofRspsThe number of Watchdog response packets sent to
IPX servers in response to Watchdog queries.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.65 |
wfIpxCircCfgDelayThe period of time, in microseconds, that it takes to
transmit one byte of data, excluding protocol headers,
to a destination on the other end of this IPX circuit,
if the IPX circuit is free of other traffic. This
value is assigned by the user.rw INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.66 |
wfIpxCircCfgThroughputThe amount of data, in bits per second, that may flow
through this IPX circuit if there is no other traffic.
This value is assigned by the user.rw INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.67 |
wfIpxCircSPXOutWatchdogSpoofRspsThe number of SPX Watchdog response packets sent to
SPX endpoint in response to Watchdog requests.ro Counter .1.3.6.1.4.1.18.3.5.5.17.1.68 |
wfIpxCircInitStabilizationTimerThe circuit RIP/SAP start delay timer to allow routes to stabilize, in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.5.17.1.69 |
wfIpxCircSVCBroadcastEnable if Frame Relay SVCs should be established for
all adjacent hosts before sending RIP and SAP updates.rw Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.70 |
wfIpxCircVRRPTriggerStateIndicates whether VRRP subsystem wants this IPX Intf to
be enabled or disabled.ro Enumeration .1.3.6.1.4.1.18.3.5.5.17.1.71 |
wfIpxDestEntryTableIPX Dest table, contains information about all known
destinations. SEQUENCE OF WfIpxDestEntry .1.3.6.1.4.1.18.3.5.5.18 |
wfIpxDestEntryDestination table contains information about all known destinations WfIpxDestEntry .1.3.6.1.4.1.18.3.5.5.18.1 |
wfIpxDestSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.18.1.1 |
wfIpxDestNetNumThe identifier of this circuit, unique within the
instance. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.18.1.2 |
wfIpxDestProtocolThe routing protocol from which knowledge of this
destination was obtained.ro Enumeration .1.3.6.1.4.1.18.3.5.5.18.1.3 |
wfIpxDestTicksThe delay in ticks to reach this destination.ro INTEGER .1.3.6.1.4.1.18.3.5.5.18.1.4 |
wfIpxDestHopCountThe number of hops necessary to reach the destination.ro INTEGER .1.3.6.1.4.1.18.3.5.5.18.1.5 |
wfIpxDestNextHopCircIndexThe unique identifier of the IPX circuit used to reach
the next hop.ro INTEGER .1.3.6.1.4.1.18.3.5.5.18.1.6 |
wfIpxDestNextHopHostAddressThe Host address of the Next Hop.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.18.1.7 |
wfIpxDestNextHopNetNumThe IPX network number of the next hop.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.18.1.8 |
wfIpxDestAgeThe current age of this entry, in seconds. Local,
Static, and NLSP destinations are not aged.ro INTEGER .1.3.6.1.4.1.18.3.5.5.18.1.9 |
wfIpxUserStaticRouteEntryTableWellfleet IPX Static Route Table SEQUENCE OF WfIpxUserStaticRouteEntry .1.3.6.1.4.1.18.3.5.5.19 |
wfIpxUserStaticRouteEntryThe Static Routes table contains information about all
destinations reached via user statically configured routes. WfIpxUserStaticRouteEntry .1.3.6.1.4.1.18.3.5.5.19.1 |
wfIpxUserStaticRouteDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.19.1.1 |
wfIpxUserStaticRouteDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.19.1.2 |
wfIpxUserStaticRouteSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.19.1.3 |
wfIpxUserStaticRouteCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.19.1.4 |
wfIpxUserStaticRouteNetNumThe network number of this static route.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.19.1.5 |
wfIpxUserStaticRouteTicksThe cost in ticks of this static route entry.rw INTEGER .1.3.6.1.4.1.18.3.5.5.19.1.6 |
wfIpxUserStaticRouteHopCountThe hop count to this static route.rw INTEGER .1.3.6.1.4.1.18.3.5.5.19.1.7 |
wfIpxUserStaticRouteNextHopHostAddressThe next hop host address of this entryrw OCTET STRING .1.3.6.1.4.1.18.3.5.5.19.1.8 |
wfIpxAutoStaticRouteEntryTableWellfleet IPX Automatic Static Route Table SEQUENCE OF WfIpxAutoStaticRouteEntry .1.3.6.1.4.1.18.3.5.5.20 |
wfIpxAutoStaticRouteEntryThe Auto Static Routes table contains information about all
destinations reached via Auto statically configured routes. WfIpxAutoStaticRouteEntry .1.3.6.1.4.1.18.3.5.5.20.1 |
wfIpxAutoStaticRouteDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.20.1.1 |
wfIpxAutoStaticRouteDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.20.1.2 |
wfIpxAutoStaticRouteSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.20.1.3 |
wfIpxAutoStaticRouteCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.20.1.4 |
wfIpxAutoStaticRouteNetNumThe network number of this static route.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.20.1.5 |
wfIpxAutoStaticRouteTicksThe cost in ticks of this static route entry.ro INTEGER .1.3.6.1.4.1.18.3.5.5.20.1.6 |
wfIpxAutoStaticRouteHopCountThe hop count to this static route.ro INTEGER .1.3.6.1.4.1.18.3.5.5.20.1.7 |
wfIpxAutoStaticRouteNextHopHostAddressThe next hop host address of this entryro OCTET STRING .1.3.6.1.4.1.18.3.5.5.20.1.8 |
wfIpxStaticRouteMaskEntryTableWellfleet IPX Static Route Mask Table SEQUENCE OF WfIpxStaticRouteMaskEntry .1.3.6.1.4.1.18.3.5.5.21 |
wfIpxStaticRouteMaskEntryThe static route mask table only allows auto static route
entries to be made when the net fits the netmask. WfIpxStaticRouteMaskEntry .1.3.6.1.4.1.18.3.5.5.21.1 |
wfIpxStaticRouteMaskDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.21.1.1 |
wfIpxStaticRouteMaskDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.21.1.2 |
wfIpxStaticRouteMaskSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.21.1.3 |
wfIpxStaticRouteMaskCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.21.1.4 |
wfIpxStaticRouteMaskNetworkThe networkro OCTET STRING .1.3.6.1.4.1.18.3.5.5.21.1.5 |
wfIpxStaticRouteMaskNetworkMaskThe network mask.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.21.1.6 |
wfIpxServEntryTableWellfleet IPX service Table SEQUENCE OF WfIpxServEntry .1.3.6.1.4.1.18.3.5.5.22 |
wfIpxServEntryTable of services, indexed by type and name.
NOTE: In the instance id wfIpxServName is
prefixed by the service name's length. WfIpxServEntry .1.3.6.1.4.1.18.3.5.5.22.1 |
wfIpxServSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.22.1.1 |
wfIpxServTypeThe Service type.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.22.1.2 |
wfIpxServNameThe Service name.
NOTE: This is a variable length field, 2-47 chars.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.22.1.3 |
wfIpxServProtocolThe protocol from which knowledge of service was
obtained.ro Enumeration .1.3.6.1.4.1.18.3.5.5.22.1.4 |
wfIpxServNetNumThe IPX network number portion of the IPX address of the
service.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.22.1.5 |
wfIpxServNodeThe node portion of the IPX address of the service.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.22.1.6 |
wfIpxServSocketThe socket portion of the IPX address of the service.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.22.1.7 |
wfIpxServHopCountThe number of hops to the service.ro INTEGER .1.3.6.1.4.1.18.3.5.5.22.1.8 |
wfIpxServNextHopCircIndexThe unique identifier of the IPX circuit used to reach
the next hop.ro INTEGER .1.3.6.1.4.1.18.3.5.5.22.1.9 |
wfIpxServNextHopHostAddressThe Host address of the Next Hop.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.22.1.10 |
wfIpxServNextHopNetNumThe IPX network number of the next hop.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.22.1.11 |
wfIpxServAgeThe current age of this entry, in seconds. Local,
Static, and NLSP services are not aged.ro INTEGER .1.3.6.1.4.1.18.3.5.5.22.1.12 |
wfIpxUserStaticServEntryTableWellfleet IPX User Static Service Table SEQUENCE OF WfIpxUserStaticServEntry .1.3.6.1.4.1.18.3.5.5.23 |
wfIpxUserStaticServEntryThe Static Servs table contains information about all
destinations reached via user statically configured Servs.
NOTE: In the instance id wfIpxUserStaticServName is
prefixed by the service name's length. WfIpxUserStaticServEntry .1.3.6.1.4.1.18.3.5.5.23.1 |
wfIpxUserStaticServDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.23.1.1 |
wfIpxUserStaticServDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.23.1.2 |
wfIpxUserStaticServSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.23.1.3 |
wfIpxUserStaticServCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.23.1.4 |
wfIpxUserStaticServNameThe service name.
NOTE: This is a variable length field, 2-47 chars.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.23.1.5 |
wfIpxUserStaticServTypeThe service type.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.23.1.6 |
wfIpxUserStaticServNetNumThe network number of this static service.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.23.1.7 |
wfIpxUserStaticServHostAddressThe host address of this static service.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.23.1.8 |
wfIpxUserStaticServSocketThe socket of this static service.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.23.1.9 |
wfIpxUserStaticServHopCountThe hop count of this static service.rw INTEGER .1.3.6.1.4.1.18.3.5.5.23.1.10 |
wfIpxAutoStaticServEntryTableWellfleet IPX Auto Static Service Table SEQUENCE OF WfIpxAutoStaticServEntry .1.3.6.1.4.1.18.3.5.5.24 |
wfIpxAutoStaticServEntryThe Static Servs table contains information about all
destinations reached via Auto statically configured Servs.
NOTE: In the instance id wfIpxAutoStaticServName is
prefixed by the service name's length. WfIpxAutoStaticServEntry .1.3.6.1.4.1.18.3.5.5.24.1 |
wfIpxAutoStaticServDeleteCreate/Delete parameter. Default is created.
Autos perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.24.1.1 |
wfIpxAutoStaticServDisableEnable/Disable parameter. Default is enabled.
Autos perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.24.1.2 |
wfIpxAutoStaticServSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.24.1.3 |
wfIpxAutoStaticServCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.24.1.4 |
wfIpxAutoStaticServNameThe service name.
NOTE: This is a variable length field, 2-47 chars.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.24.1.5 |
wfIpxAutoStaticServTypeThe service type.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.24.1.6 |
wfIpxAutoStaticServNetNumThe network number of this static service.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.24.1.7 |
wfIpxAutoStaticServHostAddressThe host address of this static service.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.24.1.8 |
wfIpxAutoStaticServSocketThe socket of this static service.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.24.1.9 |
wfIpxAutoStaticServHopCountThe hop count of this static service.ro INTEGER .1.3.6.1.4.1.18.3.5.5.24.1.10 |
wfIpxStaticServMaskEntryTableWellfleet IPX Static Service Mask Table SEQUENCE OF WfIpxStaticServMaskEntry .1.3.6.1.4.1.18.3.5.5.25 |
wfIpxStaticServMaskEntryThe Static Servs table contains information about all
destinations reached via Auto statically configured Servs. WfIpxStaticServMaskEntry .1.3.6.1.4.1.18.3.5.5.25.1 |
wfIpxStaticServMaskDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.25.1.1 |
wfIpxStaticServMaskDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.25.1.2 |
wfIpxStaticServMaskSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.25.1.3 |
wfIpxStaticServMaskCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.25.1.4 |
wfIpxStaticServMaskNetworkThe networkro OCTET STRING .1.3.6.1.4.1.18.3.5.5.25.1.5 |
wfIpxStaticServMaskNetworkMaskThe network mask.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.25.1.6 |
wfIpxStaticHostEntryTableWellfleet IPX Static Host Table SEQUENCE OF WfIpxStaticHostEntry .1.3.6.1.4.1.18.3.5.5.26 |
wfIpxStaticHostEntryThe static host entries define mappings from circindex
and host address to wan physical layer address. WfIpxStaticHostEntry .1.3.6.1.4.1.18.3.5.5.26.1 |
wfIpxStaticHostDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.26.1.1 |
wfIpxStaticHostDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.26.1.2 |
wfIpxStaticHostSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.26.1.3 |
wfIpxStaticHostCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.26.1.4 |
wfIpxStaticHostAddressThe host address of this static host.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.26.1.5 |
wfIpxStaticHostWanAddressThe wan address of this host.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.26.1.6 |
wfIpxStaticHostSubaddressThe subaddress used to establish an SVC to the adjacent host.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.26.1.7 |
wfIpxStaticHostTypeOfNumberThe type of number used to establish an SVC to the adjacent
host.rw Enumeration .1.3.6.1.4.1.18.3.5.5.26.1.8 |
wfIpxStaticHostTypeThe type of static host.rw Enumeration .1.3.6.1.4.1.18.3.5.5.26.1.9 |
wfIpxStaticHostGreConnNameThe name of the remote GRE connection to which a static host is configured.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.26.1.10 |
wfIpxUserStaticNETBIOSTableWellfleet IPX User Static NetBIOS Route Table SEQUENCE OF WfIpxUserStaticNETBIOSEntry .1.3.6.1.4.1.18.3.5.5.27 |
wfIpxUserStaticNETBIOSEntryContains entries that map NetBIOS names to destination addresses. WfIpxUserStaticNETBIOSEntry .1.3.6.1.4.1.18.3.5.5.27.1 |
wfIpxUserStaticNETBIOSDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.27.1.1 |
wfIpxUserStaticNETBIOSDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.27.1.2 |
wfIpxUserStaticNETBIOSSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.27.1.3 |
wfIpxUserStaticNETBIOSNameThe destination name for this NetBIOS static route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.27.1.4 |
wfIpxUserStaticNETBIOSDestNetworkThe destination network for this NetBIOS static route.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.27.1.5 |
wfIpxAutoStaticNETBIOSTableWellfleet IPX Auto Static NetBIOS Route Table SEQUENCE OF WfIpxAutoStaticNETBIOSEntry .1.3.6.1.4.1.18.3.5.5.28 |
wfIpxAutoStaticNETBIOSEntryContains entries that map NetBIOS names to destination addresses. WfIpxAutoStaticNETBIOSEntry .1.3.6.1.4.1.18.3.5.5.28.1 |
wfIpxAutoStaticNETBIOSDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.28.1.1 |
wfIpxAutoStaticNETBIOSDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.28.1.2 |
wfIpxAutoStaticNETBIOSSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.28.1.3 |
wfIpxAutoStaticNETBIOSDestNetworkThe destination network for this NetBIOS static route.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.28.1.4 |
wfIpxAutoStaticNETBIOSNameThe destination name for this NetBIOS static route.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.28.1.5 |
wfIpxRouteFilterTableWellfleet IPX Route Filter Table SEQUENCE OF WfIpxRouteFilterEntry .1.3.6.1.4.1.18.3.5.5.29 |
wfIpxRouteFilterEntryEach entry corresponds to one filter. WfIpxRouteFilterEntry .1.3.6.1.4.1.18.3.5.5.29.1 |
wfIpxRouteFilterDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.29.1.1 |
wfIpxRouteFilterDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.29.1.2 |
wfIpxRouteFilterSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.29.1.3 |
wfIpxRouteFilterCircIndexThe identifier of this circuit, unique within the
instance of IPX. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.29.1.4 |
wfIpxRouteFilterRuleNumberThe identifier of the filter, unique within the
IPX circuit.ro INTEGER .1.3.6.1.4.1.18.3.5.5.29.1.5 |
wfIpxRouteFilterNetworkThe networkrw OCTET STRING .1.3.6.1.4.1.18.3.5.5.29.1.6 |
wfIpxRouteFilterNetworkMaskThe network maskrw OCTET STRING .1.3.6.1.4.1.18.3.5.5.29.1.7 |
wfIpxRouteFilterModeThe mode for filtering, Inbound, Outbound, or Both.rw Enumeration .1.3.6.1.4.1.18.3.5.5.29.1.8 |
wfIpxRouteFilterActionThe action for the filter.rw Enumeration .1.3.6.1.4.1.18.3.5.5.29.1.9 |
wfIpxRouteFilterProtocolApply this filter only to routes learned on protocol X when
sending RIP updates. Does not apply to Inbound routes. A value
of 1 (default) represents any protocol.rw Enumeration .1.3.6.1.4.1.18.3.5.5.29.1.10 |
wfIpxRouteFilterCostCost for routes matching this filter. A Zero cost indicates
that the route's actual cost should be used. Value only used
when action is Advertise.rw INTEGER .1.3.6.1.4.1.18.3.5.5.29.1.11 |
wfIpxRouteFilterCounterThe number of packets matching this filter.ro Counter .1.3.6.1.4.1.18.3.5.5.29.1.12 |
wfIpxRouteFilterPriorityPriority of this filter in relation to other filters of the
same type.rw INTEGER .1.3.6.1.4.1.18.3.5.5.29.1.13 |
wfIpxServNetFilterTableWellfleet IPX Service Net Filter Table SEQUENCE OF WfIpxServNetFilterEntry .1.3.6.1.4.1.18.3.5.5.30 |
wfIpxServNetFilterEntryEach entry corresponds to one service filter. WfIpxServNetFilterEntry .1.3.6.1.4.1.18.3.5.5.30.1 |
wfIpxServNetFilterDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.30.1.1 |
wfIpxServNetFilterDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.30.1.2 |
wfIpxServNetFilterSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.30.1.3 |
wfIpxServNetFilterCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.30.1.4 |
wfIpxServNetFilterRuleNumberThe identifier of the filter, unique within the
IPX circuit.ro INTEGER .1.3.6.1.4.1.18.3.5.5.30.1.5 |
wfIpxServNetFilterNetworkThe network.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.30.1.6 |
wfIpxServNetFilterNetworkMaskThe network mask.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.30.1.7 |
wfIpxServNetFilterTypeThe service type.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.30.1.8 |
wfIpxServNetFilterModeThe mode for filtering, Inbound, Outbound, or Both.rw Enumeration .1.3.6.1.4.1.18.3.5.5.30.1.9 |
wfIpxServNetFilterActionThe action for the filter.rw Enumeration .1.3.6.1.4.1.18.3.5.5.30.1.10 |
wfIpxServNetFilterProtocolApply this filter only to services learned on protocol X when
sending SAP updates. Does not apply to Inbound services. A value
of 1 (default) represents any protocol.rw Enumeration .1.3.6.1.4.1.18.3.5.5.30.1.11 |
wfIpxServNetFilterCostCost for services matching this filter. A Zero cost indicates
that the service's actual cost should be used. Value only used
when action is Advertise.rw INTEGER .1.3.6.1.4.1.18.3.5.5.30.1.12 |
wfIpxServNetFilterCounterThe number of packets matching this filter.ro Counter .1.3.6.1.4.1.18.3.5.5.30.1.13 |
wfIpxServNetFilterPriorityPriority of this filter in relation to other filters of the
same type.rw INTEGER .1.3.6.1.4.1.18.3.5.5.30.1.14 |
wfIpxServNameFilterTableWellfleet IPX Service Name Filter Table SEQUENCE OF WfIpxServNameFilterEntry .1.3.6.1.4.1.18.3.5.5.31 |
wfIpxServNameFilterEntryEach entry corresponds to one service filter.
NOTE: In the instance id wfIpxServNameFilterName is
prefixed by the service name's length. WfIpxServNameFilterEntry .1.3.6.1.4.1.18.3.5.5.31.1 |
wfIpxServNameFilterDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.31.1.1 |
wfIpxServNameFilterDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.31.1.2 |
wfIpxServNameFilterSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.31.1.3 |
wfIpxServNameFilterCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.31.1.4 |
wfIpxServNameFilterRuleNumberThe identifier of the filter, unique within the
IPX circuit.ro INTEGER .1.3.6.1.4.1.18.3.5.5.31.1.5 |
wfIpxServNameFilterNameThe name of the service to be filtered.
NOTE: This is a variable length field, 2-47 chars.
This field may be a regex matching pattern.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.31.1.6 |
wfIpxServNameFilterTypeThe type of the service to be filtered.rw OCTET STRING .1.3.6.1.4.1.18.3.5.5.31.1.7 |
wfIpxServNameFilterModeThe mode for filtering, Inbound, Outbound, or Both.rw Enumeration .1.3.6.1.4.1.18.3.5.5.31.1.8 |
wfIpxServNameFilterActionThe action for the filter.rw Enumeration .1.3.6.1.4.1.18.3.5.5.31.1.9 |
wfIpxServNameFilterProtocolApply this filter only to services learned on protocol X when
sending SAP updates. Does not apply to Inbound services. A value
of 1 (default) represents any protocol.rw Enumeration .1.3.6.1.4.1.18.3.5.5.31.1.10 |
wfIpxServNameFilterCostCost for services matching this filter. A Zero cost indicates
that the service's actual cost should be used. Value only used
when action is Advertise.rw INTEGER .1.3.6.1.4.1.18.3.5.5.31.1.11 |
wfIpxServNameFilterCounterThe number of packets matching this filter.ro Counter .1.3.6.1.4.1.18.3.5.5.31.1.12 |
wfIpxServNameFilterPriorityPriority of this filter in relation to other filters of the
same type.rw INTEGER .1.3.6.1.4.1.18.3.5.5.31.1.13 |
wfIpxRipCircTableIPX RIP Circuit MIB SEQUENCE OF WfIpxRipCircEntry .1.3.6.1.4.1.18.3.5.5.32 |
wfIpxRipCircEntryAn entry in the IPX RIP circuit table WfIpxRipCircEntry .1.3.6.1.4.1.18.3.5.5.32.1 |
wfIpxRipCircDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.1 |
wfIpxRipCircDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.2 |
wfIpxRipCircStateThe current state of this entryro Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.3 |
wfIpxRipCircSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.32.1.4 |
wfIpxRipCircIndexThe identifier of this circuit, unique within the
instance of RIP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.32.1.5 |
wfIpxRipCircModeWhether this RIP entry is in mode.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.6 |
wfIpxRipCircPaceThe maximum pace, in packets/second, at which RIP
packets may be sent on this circuit.rw INTEGER .1.3.6.1.4.1.18.3.5.5.32.1.7 |
wfIpxRipCircUpdateThe RIP periodic update interval, in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.5.32.1.8 |
wfIpxRipCircAgeMultiplierThe holding multiplier for information received in
RIP periodic updates.rw INTEGER .1.3.6.1.4.1.18.3.5.5.32.1.9 |
wfIpxRipCircPacketSizeThe Maximum RIP packet size used on this circuitrw INTEGER .1.3.6.1.4.1.18.3.5.5.32.1.10 |
wfIpxRipCircOutPacketsThe number of locally created RIP packets sent out
this IPX RIP circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.32.1.11 |
wfIpxRipCircInPacketsThe number of RIP packets received on this IPX circuit,
destined locally.ro Counter .1.3.6.1.4.1.18.3.5.5.32.1.12 |
wfIpxRipCircBadPacketsThe number of bad RIP packets received on this
IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.32.1.13 |
wfIpxRipCircUseMulticastUse multicast address to send RIP packets.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.14 |
wfIpxRipCircSplitHorizonEnable/Disable split horizon on this RIP circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.15 |
wfIpxRipCircGenAutoStaticRoutesTell IPX to generate entries in the wfIpxAutoStaticRouteTable.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.16 |
wfIpxRipCircImmedUpdateEnable/Disable parameter. Users perform an
SNMP SET operation on this object in order to
enable/disable RIP immediate update on this
particular circuit. The 'useglobal(3)' means
the value of the global parameter
wfIpxAdvSysGlobalTrigUpdate will be used on the
circuit for this attribute. Default is useglobal.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.17 |
wfIpxRipCircDefaultRouteSupplyAdvertise the default route, 0xFFFFFFFE, in RIP packets.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.18 |
wfIpxRipCircDefaultRouteListenAccept the default route, 0xFFFFFFFE, in RIP packets.rw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.19 |
wfIpxRipCircLostRouteDisableDisable lost route on RIP circuitrw Enumeration .1.3.6.1.4.1.18.3.5.5.32.1.20 |
wfIpxSapCircTableIPX SAP Circuit MIB SEQUENCE OF WfIpxSapCircEntry .1.3.6.1.4.1.18.3.5.5.33 |
wfIpxSapCircEntryAn entry in the IPX SAP circuit table WfIpxSapCircEntry .1.3.6.1.4.1.18.3.5.5.33.1 |
wfIpxSapCircDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete this entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.1 |
wfIpxSapCircDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an entry.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.2 |
wfIpxSapCircStateThe current state of this entryro Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.3 |
wfIpxSapCircSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.33.1.4 |
wfIpxSapCircIndexThe identifier of this circuit, unique within the
instance of SAP. This value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.33.1.5 |
wfIpxSapCircModeWhether this SAP entry is in mode.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.6 |
wfIpxSapCircPaceThe maximum pace, in packets/second, at which SAP
packets may be sent on this circuit.rw INTEGER .1.3.6.1.4.1.18.3.5.5.33.1.7 |
wfIpxSapCircUpdateThe SAP periodic update interval, in secondsrw INTEGER .1.3.6.1.4.1.18.3.5.5.33.1.8 |
wfIpxSapCircAgeMultiplierThe holding multiplier for information received in
SAP periodic updates.rw INTEGER .1.3.6.1.4.1.18.3.5.5.33.1.9 |
wfIpxSapCircPacketSizeThe Maximum SAP packet size used on this circuitrw INTEGER .1.3.6.1.4.1.18.3.5.5.33.1.10 |
wfIpxSapCircGetNearestServerReplyEnable/Disable responding to GNS requests on this circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.11 |
wfIpxSapCircNSQAlphabeticalRespond to NSQ in Alphabetical order, ie. first-best server.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.12 |
wfIpxSapCircOutPacketsThe number of locally created SAP packets sent out
this IPX SAP circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.33.1.13 |
wfIpxSapCircInPacketsThe number of SAP packets received on this IPX circuit,
destined locally.ro Counter .1.3.6.1.4.1.18.3.5.5.33.1.14 |
wfIpxSapCircBadPacketsThe number of bad SAP packets received on this
IPX circuit.ro Counter .1.3.6.1.4.1.18.3.5.5.33.1.15 |
wfIpxSapCircUseMulticastUse multicast address to send SAP packets.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.16 |
wfIpxSapCircSplitHorizonEnable/Disable split horizon on this SAP circuit.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.17 |
wfIpxSapCircGenAutoStaticServicesTell IPX to generate entries in the wfIpxAutoStaticServTable.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.18 |
wfIpxSapCircImmedUpdateEnable/Disable parameter. Users perform an
SNMP SET operation on this object in order to
enable/disable RIP immediate update on this
particular circuit. The 'useglobal(3)' means
the value of the global parameter
wfIpxAdvSysGlobalTrigUpdate will be used on the
circuit for this attribute. Default is useglobal.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.19 |
wfIpxSapCircSaveFullNameThis allows the Router to ignore all characters following the
NULL character in the service name field of SAP packets. It
is intended to be a memory and cpu saving option.rw Enumeration .1.3.6.1.4.1.18.3.5.5.33.1.20 |
wfIpxHostEntryTableIPX Host table, contains information about all known hosts. SEQUENCE OF WfIpxHostEntry .1.3.6.1.4.1.18.3.5.5.34 |
wfIpxHostEntryHost table contains information about all known hosts. WfIpxHostEntry .1.3.6.1.4.1.18.3.5.5.34.1 |
wfIpxHostSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.34.1.1 |
wfIpxHostNextHopCircIndexThe unique identifier of the IPX circuit used to reach
the host.ro INTEGER .1.3.6.1.4.1.18.3.5.5.34.1.2 |
wfIpxHostHostAddressThe Host address of the Host.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.34.1.3 |
wfIpxHostNetNumThe network number of this host.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.34.1.4 |
wfIpxHostWanAddressThe Wan Physical address of this Host.
NOTE: Only valid on WAN media where there is no
one-to-one mapping of host address to physical
address.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.34.1.5 |
wfIpxHostProtocolThe routing protocol from which knowledge of this
host was obtained.ro Enumeration .1.3.6.1.4.1.18.3.5.5.34.1.6 |
wfIpxHostAgeThe current age of this entry, in seconds. Local and
Static hosts are not aged.ro INTEGER .1.3.6.1.4.1.18.3.5.5.34.1.7 |
wfIpxForwardEntryTableIPX Forward table, contains information about
all known forward entries. SEQUENCE OF WfIpxForwardEntry .1.3.6.1.4.1.18.3.5.5.35 |
wfIpxForwardEntryForward table contains information about all
known forward entries. WfIpxForwardEntry .1.3.6.1.4.1.18.3.5.5.35.1 |
wfIpxForwardSysInstanceThe unique identifier of the instance of IPX
to which this entry corresponds.ro INTEGER .1.3.6.1.4.1.18.3.5.5.35.1.1 |
wfIpxForwardCircIndexThe unique identifier of the IPX circuit forward table
in which this forward entry resides.ro INTEGER .1.3.6.1.4.1.18.3.5.5.35.1.2 |
wfIpxForwardNetNumThe network number of this forward entry.ro OCTET STRING .1.3.6.1.4.1.18.3.5.5.35.1.3 |
wfIpxForwardTypeThe type of this forward entry.ro Enumeration .1.3.6.1.4.1.18.3.5.5.35.1.4 |
wfIpxForwardProtocolThe routing protocol from which knowledge of this
forward was obtained.ro Enumeration .1.3.6.1.4.1.18.3.5.5.35.1.5 |
wfIpxForwardCountThe number of equal cost paths for this forward entry.ro Counter .1.3.6.1.4.1.18.3.5.5.35.1.6 |
wfIpxTrafficFilter2TableIPX Traffic Filters SEQUENCE OF WfIpxTrafficFilter2Entry .1.3.6.1.4.1.18.3.5.5.36 |
wfIpxTrafficFilter2EntryA traffic filter definition WfIpxTrafficFilter2Entry .1.3.6.1.4.1.18.3.5.5.36.1 |
wfIpxTrafficFilter2CreateDefines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted.rw Enumeration .1.3.6.1.4.1.18.3.5.5.36.1.1 |
wfIpxTrafficFilter2EnableDefines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule.rw Enumeration .1.3.6.1.4.1.18.3.5.5.36.1.2 |
wfIpxTrafficFilter2StatusDefines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule.ro Enumeration .1.3.6.1.4.1.18.3.5.5.36.1.3 |
wfIpxTrafficFilter2CounterThe number of received packets that have
matched this rule.ro Counter .1.3.6.1.4.1.18.3.5.5.36.1.4 |
wfIpxTrafficFilter2DefinitionThe filter rule definition.rw Opaque .1.3.6.1.4.1.18.3.5.5.36.1.5 |
wfIpxTrafficFilter2ReservedReserved field.ro INTEGER .1.3.6.1.4.1.18.3.5.5.36.1.6 |
wfIpxTrafficFilter2SysInstanceThe unique identifier for the instance of IPX.ro INTEGER .1.3.6.1.4.1.18.3.5.5.36.1.7 |
wfIpxTrafficFilter2CircIndexThe identifier of this IPX circuit. This
value corresponds to the IPX circuit
identifier found in wfIpxCircIndex.ro INTEGER .1.3.6.1.4.1.18.3.5.5.36.1.8 |
wfIpxTrafficFilter2RuleNumberID for the rule.ro INTEGER .1.3.6.1.4.1.18.3.5.5.36.1.9 |
wfIpxTrafficFilter2FragmentFragment number - for large rules.ro INTEGER .1.3.6.1.4.1.18.3.5.5.36.1.10 |
wfIpxTrafficFilter2NameName of the rule number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.18.3.5.5.36.1.11 |
wfIpxBasicSysEntryAn entry in the IPX Circ Table WfIpxBasicSysEntry .wfIpxBasicSysTable.1 |
wfIpxBasicSysDeleteCreate/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete IPX.rw Enumeration .wfIpxBasicSysTable.1.1 |
wfIpxBasicSysDisableEnable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable IPX.rw Enumeration .wfIpxBasicSysTable.1.2 |
wfIpxBasicSysStateThe current state of the entire IPX Router.ro Enumeration .wfIpxBasicSysTable.1.3 |
wfIpxBasicSysInstanceThe unique identifier for the instance of IPX.ro INTEGER .wfIpxBasicSysTable.1.4 |
wfIpxBasicSysPrimaryNetworkNumberThe 'internal' network number, used for IPXWANrw OCTET STRING .wfIpxBasicSysTable.1.5 |
wfIpxBasicSysMultipleHostAddressesAllow the user to configure one host/mac addr for the whole box (default)
where, if configured, the CfgHostAddress is used (becomes HostAddress)
otherwise if left unconfigured the Host address is discerned from the
backplane serial number. If Multiple host is Enabled and the host number is
configured in the interface record the configured value is used as the
hostid/mac addr of the interface (except Token Ring which can't go into
promiscous mode, uses Token Ring Mac as hostid/mac of interface). If the
host number in left unconfigured then the hostid/mac is gotten from the
mac of the circuit.rw Enumeration .wfIpxBasicSysTable.1.6 |
wfIpxBasicSysCfgHostAddressHost Number of Router and potential MAC address of box.
This host number will be used to overide the default
box generated host address.rw OCTET STRING .wfIpxBasicSysTable.1.7 |
wfIpxBasicSysHostAddressHost Number of Router and potential MAC address of box.
This is not a restart variable because this will be
filled in from the IPX code after reading it from
either the configurable host number or from a box
generated variable.ro OCTET STRING .wfIpxBasicSysTable.1.8 |
wfIpxBasicSysRouterNameThe Name of the Router, used for IPXWANrw DisplayString (SNMPv2-TC) .wfIpxBasicSysTable.1.9 |
wfIpxBasicSysInReceivesThe total number of IPX packets received, including errorsro Counter .wfIpxBasicSysTable.1.10 |
wfIpxBasicSysInHdrErrorsThe number of IPX packets discarded due to errors in
their headers, including any IPX packet with a size less
than the minimum of 30 bytesro Counter .wfIpxBasicSysTable.1.11 |
wfIpxBasicSysInUnknownSocketsThe number of IPX packets discarded because the
destination was the router and the socket was not knownro Counter .wfIpxBasicSysTable.1.12 |
wfIpxBasicSysInDiscardsThe number of IPX packets received but discarded due to
reasons other than those accounted for by
wfIpxBasicSysInHdrErrors , wfIpxBasicSysInUnknownSockets,
wfIpxBasicSysAdvSysInDiscards, and wfIpxAdvSysInCompressDiscardsro Counter .wfIpxBasicSysTable.1.13 |
wfIpxBasicSysInBadChecksumsThe number of IPX packets received with incorrect checksumsro Counter .wfIpxBasicSysTable.1.14 |
wfIpxBasicSysInDeliversThe number of IPX packets delivered locallyro Counter .wfIpxBasicSysTable.1.15 |
wfIpxBasicSysNoRoutesThe number of times no route to a destination was foundro Counter .wfIpxBasicSysTable.1.16 |
wfIpxBasicSysOutRequestsThe number of IPX packets supplied locally for
transmission, not including any packets counted in
wfIpxAdvSysForwPacketsro Counter .wfIpxBasicSysTable.1.17 |
wfIpxBasicSysOutMalformedRequestsThe number of outgoing IPX packets discarded due to
reasons other than those accounted for in
wfIpxBasicSysOutMalformedRequest, wfIpxAdvSysOutFiltered,
and wfIpxAdvSysOutCompressDiscardsro Counter .wfIpxBasicSysTable.1.18 |
wfIpxBasicSysOutPacketsThe total number of IPX packets transmittedro Counter .wfIpxBasicSysTable.1.19 |
wfIpxBasicSysOpenEncapsFailsThe number of IPX encaps open calls which failedro Counter .wfIpxBasicSysTable.1.20 |
wfIpxBasicSysOutDiscardsThe number of outgoing IPX packets discarded due to
reasons other than those accounted for by
wfIpxBasicSysOutMalformedRequests,
wfIpxBasicSysAdvSysOutFiltered, and wfIpxAdvSysOutCompressDiscardsro Counter .wfIpxBasicSysTable.1.21 |