Wellfleet-IGMP-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
66
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
66 total| Object Name |
|---|
wfIgmpBase OBJECT IDENTIFIER .1.3.6.1.4.1.18.3.5.3.13.1 |
RFC1155-SMI Unknown .1.3.6.1.4.1.18.3.5.3.13.1 |
wfIgmpBaseCreateCreate/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete IGMP.rw Enumeration .1.3.6.1.4.1.18.3.5.3.13.1.1 |
wfIgmpBaseEnableEnable/Disable Parameter indicates whether
this IGMP record is enabled or disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.3.13.1.2 |
wfIgmpBaseStateThe current state of the entire IGMP.ro Enumeration .1.3.6.1.4.1.18.3.5.3.13.1.3 |
wfIgmpBaseEstimatedGroupsThe number of estimated groups that will
be used through this router.rw INTEGER .1.3.6.1.4.1.18.3.5.3.13.1.4 |
wfIgmpBaseVersionThresholdThe time (in seconds) that will pass after
the last old style query before we will try
to become the igmp designated querierrw INTEGER .1.3.6.1.4.1.18.3.5.3.13.1.5 |
wfIgmpBaseDebugThis is a debug field for IGMP. Setting bits
cause igmp to gernerate certain log messages.
This field will NOT restart IGMP.
The follow bits maybe set in any combination
(LS stands for least significant):
0x00000001 for received IGMP protocol (join/leave) packets
0x00000002 for sent IGMP messages
0x00000004 for received mcast protocl packets
0x00000008 for MTRACE related log messages
0x00000010 for configuration related log messages
0x00000020 for interaction with mcast protocols
0x00000040 for interaction with RSVP
0x00000080 for MTM forwarding cache related log messages
0x00000100 for IGMP Relay related log messagesrw INTEGER .1.3.6.1.4.1.18.3.5.3.13.1.6 |
wfIgmpBaseJoinAckEnableEnable/Disable Parameter indicates whether an immediate
response is needed for an IGMP report by sending an IGMP
query to the group of this IGMP report.rw Enumeration .1.3.6.1.4.1.18.3.5.3.13.1.7 |
wfIgmpBaseFwdCacheLimitMaximum number of MTM forwarding cache entriesrw INTEGER .1.3.6.1.4.1.18.3.5.3.13.1.8 |
wfIgmpBaseIgnoreNonLocalReportWhether IGMP joins/leaves from a non-local network are
accepted. For example, if network 10.10.10.0/24 is defined
on circuit 1 which is connected to a physical wire for
both 10.10.10.0/24 and 10.10.11.0/24, an IGMP Join
from the 10.10.11.0/24 network may be ignored on the circuitrw Enumeration .1.3.6.1.4.1.18.3.5.3.13.1.9 |
wfIgmpBaseRelayEnableEnable/Disable Parameter indicates whether
the IGMP Relay is enabled or disabled.rw Enumeration .1.3.6.1.4.1.18.3.5.3.13.1.10 |
wfIgmpBaseRelayTimeoutValueThe timer value for timing out IGMP-R forward entries.rw INTEGER .1.3.6.1.4.1.18.3.5.3.13.1.11 |
wfIgmpBaseRelayFwdOptionsThis mib attribute indicates whether multicast data
is forwarded to IGMP-R primary upstream circuit,
backup upstream, or both of them.rw Enumeration .1.3.6.1.4.1.18.3.5.3.13.1.12 |
wfIgmpBaseGroupCountActual number of groups presented on the routerro Counter .1.3.6.1.4.1.18.3.5.3.13.1.13 |
wfIgmpBasePerStreamRedundEnableEnable/Disable Parameter indicates whether
the IGMP Relay Per-Stream Redundancy is enabled
or disabled.
Per-Stream Redundancy allows a stream to fail over
to backup link if it is not received on the primary
link for a period of wfIgmpBaseRelayTimeoutValue,
and then fall back if the stream is received on
the primary link again.
To enable this feature, you must enable
wfIgmpBaseRelayEnable.rw Enumeration .1.3.6.1.4.1.18.3.5.3.13.1.14 |
wfIgmpIfTableList of configured IGMP interfaces SEQUENCE OF WfIgmpIfEntry .1.3.6.1.4.1.18.3.5.3.13.2 |
wfIgmpIfEntryA description of an IGMP interface WfIgmpIfEntry .1.3.6.1.4.1.18.3.5.3.13.2.1 |
wfIgmpIfCreateIndicates whether this IGMP If record is to be deleted or createdrw Enumeration .1.3.6.1.4.1.18.3.5.3.13.2.1.1 |
wfIgmpIfEnableIndicates whether this IGMP intf record is to be enabled or disabledrw Enumeration .1.3.6.1.4.1.18.3.5.3.13.2.1.2 |
wfIgmpIfStateThe current state of the IGMP interface. Invalid indicates an error in
processing the cfg recordro Enumeration .1.3.6.1.4.1.18.3.5.3.13.2.1.3 |
wfIgmpDesignatedRouterThe current Igmp Designated Router. If there are multipule
routers on a multi-access network, this is the router sending
the igmp host queries.ro IpAddress .1.3.6.1.4.1.18.3.5.3.13.2.1.4 |
wfIgmpIfQueryRateQuery rate. This value specifies, in seconds, how often a local group
membership is queried. If set to 0, no queries will be sent out this
interface, and it should mean that there are no hosts on that interface
that want to multicast. This does not mean no multicast traffic will go
out this port, as routed mutilcast traffic may use this interfacerw INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.5 |
wfIgmpIfMembershipTimeoutMembership timeout. This value specifies, in seconds, the amount of
time that a local group membership is valid without confirmation.
The suggested value is (2*QueryRate)+20rw INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.6 |
wfIgmpIfDRTimeoutDesignated Router Timeout. This value specifies, in seconds, the
amount of time from the last host query message that will be used
to determine the loss of the IGMP designated router.rw INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.7 |
wfIgmpIfLocalIpAddressIP Address currently in use on this circuit. This is the IP address
that being used to generate and multicast trafficro IpAddress .1.3.6.1.4.1.18.3.5.3.13.2.1.8 |
wfIgmpIfCctnoThe Circuit IGMP should be running onro INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.9 |
wfIgmpIfInDatagramsThe total number of IGMP datagrams received on the interface.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.10 |
wfIgmpIfOutQueriesThe number of Host Membership Query messages sent out of this
interface.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.11 |
wfIgmpIfInQueriesThe number of Host Membership Query messages that have been
received on this interface.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.12 |
wfIgmpIfDiscardsThe number of IGMP messages received on this interface that
were discarded due to bad checksums, illegal message types,
bad values in fields, etc.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.13 |
wfIgmpIfNetVersionThis is the version of igmp that this router believes is
running on this network. A value of 1 means IGMPv1 (old
igmp) and a value of 2 means IGMPv2 (new igmp).ro INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.14 |
wfIgmpIfMaxHostResponseThis is the amount of time in 10th of seconds that a host
is supposed to take to respond to a query. This will
value will be placed in the code feild of the igmp
query packet.rw INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.15 |
wfIgmpIfRoutingProtocolThis has the value of the multicast protocol running
on this interface. A value 'igmp' means there is no
multicast protocol up on this interface. Note :
type 8 used for static configuration for MTM
for ti display only.Hence is
reservedro Enumeration .1.3.6.1.4.1.18.3.5.3.13.2.1.16 |
wfIgmpIfDroppedDataPktNumber of data packets that have to be dropped on this
outgoing interface due to lack of buffers. If alias flooding
is used for some (s, g) and kernel could not allocate
buffers for some member gates, those drops are not counted
into this counterro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.17 |
wfIgmpIfMtraceEntryLifetimeThis is the amount of time in seconds that a router
is supposed to keep a forwarding cache entry that
was created specifically for mtrace.rw INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.18 |
wfIgmpIfInMtraceReqsThe total number of Mtrace packets received on the interface.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.19 |
wfIgmpIfOutMtraceReqsThe total number of Mtrace packets send from the interface.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.20 |
wfIgmpIfInMtraceRespsThe total number of Mtrace packets received on the interface.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.21 |
wfIgmpIfOutMtraceRespsThe total number of Mtrace packets send from the interface.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.22 |
wfIgmpIfRelayTypeIndicates whether the IGMP circuit is configured as the
primary upstream circuit, the backup upstream circuit or
a downstream circuit. At most one circuit can be
configured as the primary. At most one circuit can be
configured as the backup.rw Enumeration .1.3.6.1.4.1.18.3.5.3.13.2.1.23 |
wfIgmpIfUnsolicitedReportIntervalThis mib attribute is the Unsolicited Report Interval, in
seconds, which is the time between repetitions of a host's
initial report of membership in a group. If this is zero,
then do not send the report twice.rw INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.24 |
wfIgmpIfSuppressQueryWhether IGMP query is suppressed on this interface.
In Bay's multicast implementation, configuring 'IGMP'
on an interface means two things:
1. the interface will be used for forwarding multicast
traffic
2. IGMP protocol will be running on the interface
Therefore, on some interfaces like point-to-point or
non-broadcast ones, even though there is no need to
run IGMP protocol, 'igmp' must be configured.
However, with this attribute we can disable the sending
of IGMP queries.rw Enumeration .1.3.6.1.4.1.18.3.5.3.13.2.1.25 |
wfIgmpIfGroupCountThe total number of groups presented on the interface.ro Counter .1.3.6.1.4.1.18.3.5.3.13.2.1.26 |
wfIgmpIfVRRPTriggerStateIndicates whether VRRP subsystem wants this IGMP Intf to
be enabled or disabled.ro Enumeration .1.3.6.1.4.1.18.3.5.3.13.2.1.27 |
wfIgmpIfStaticFwdCacheLifeTimeIf the IGMPStaticForwarding Policy mode is set to static
to dynamic (static inbound and multicast protcol outbound)
mode. This value should be set based on which protcols are
planned to be configured on the outbound. Typical values
are for DVMRP(7200), MOSPF(600) and PIM(210) so that MTM
cache entries will be alive for the above specified
seconds even if the traffic is not present.
The above value is in seconds.rw INTEGER .1.3.6.1.4.1.18.3.5.3.13.2.1.28 |
wfIgmpGroupTableA table of IGMP groups SEQUENCE OF WfIgmpGroupEntry .1.3.6.1.4.1.18.3.5.3.13.3 |
wfIgmpGroupEntryAn IGMP group in the group table WfIgmpGroupEntry .1.3.6.1.4.1.18.3.5.3.13.3.1 |
wfIgmpGroupAddressthe group addressro IpAddress .1.3.6.1.4.1.18.3.5.3.13.3.1.1 |
wfIgmpCctthe circuit for this groupro INTEGER .1.3.6.1.4.1.18.3.5.3.13.3.1.2 |
wfIgmpIpifAddressthe IP interface for this groupro IpAddress .1.3.6.1.4.1.18.3.5.3.13.3.1.3 |
wfIgmpTimeLefthow long until this group times out.ro INTEGER .1.3.6.1.4.1.18.3.5.3.13.3.1.4 |
wfIgmpStaticGroupTableThe list of elements in IGMP Static membership table SEQUENCE OF WfIgmpStaticGroupEntry .1.3.6.1.4.1.18.3.5.3.13.4 |
wfIgmpStaticGroupEntryA Staticly configured group membership WfIgmpStaticGroupEntry .1.3.6.1.4.1.18.3.5.3.13.4.1 |
wfIgmpStaticGroupCreateIndicates whether this IGMP record is to be deleted or createdrw Enumeration .1.3.6.1.4.1.18.3.5.3.13.4.1.1 |
wfIgmpStaticGroupCctthe circuit for this groupro INTEGER .1.3.6.1.4.1.18.3.5.3.13.4.1.2 |
wfIgmpStaticGroupAddressthe group addressro IpAddress .1.3.6.1.4.1.18.3.5.3.13.4.1.3 |
wfIgmpStaticGroupPrefixthe prefix for this groupro INTEGER .1.3.6.1.4.1.18.3.5.3.13.4.1.4 |
wfIgmpBoundaryTableThe list of elements in IGMP Boundary table SEQUENCE OF WfIgmpBoundaryEntry .1.3.6.1.4.1.18.3.5.3.13.5 |
wfIgmpBoundaryEntryFor Administratively Scoped Addresses:
No group that falls into this group/prefix will be
accepted on the specified cct, or forwarded out of the cct WfIgmpBoundaryEntry .1.3.6.1.4.1.18.3.5.3.13.5.1 |
wfIgmpBoundaryCreateIndicates whether this record is to be deleted or createdrw Enumeration .1.3.6.1.4.1.18.3.5.3.13.5.1.1 |
wfIgmpBoundaryEnableIndicates whether this record is enabled or disabledrw Enumeration .1.3.6.1.4.1.18.3.5.3.13.5.1.2 |
wfIgmpBoundaryGroupAddressthe group address in concernro IpAddress .1.3.6.1.4.1.18.3.5.3.13.5.1.3 |
wfIgmpBoundaryGroupPrefixthe group prefix lengthro INTEGER .1.3.6.1.4.1.18.3.5.3.13.5.1.4 |
wfIgmpBoundaryCctListThe boundary circuit list. Each circuit takes two octetsrw OCTET STRING .1.3.6.1.4.1.18.3.5.3.13.5.1.5 |
wfIgmpBoundaryTunnelListthe boundary tunnel list. Each tunnel takes 8 octets,
the first 4 of which are for local IP address, and the
last 4 are for remote IP addressrw OCTET STRING .1.3.6.1.4.1.18.3.5.3.13.5.1.6 |